doc: board: ti: correct path to tcl scripts

OpenOCD has reorganised the tcl scripts for TI's reference boards into a
ti/ subdirectory. Update their paths to the new locations.

Signed-off-by: Bryan Brattlof <bb@ti.com>

10 files changed, 19 insertions, 20 deletions

diff --git a/doc/board/ti/am6254atl_sk.rst b/doc/board/ti/am6254atl_sk.rst
index 18a3520b39c..0df058aee15 100644
--- a/doc/board/ti/am6254atl_sk.rst
+++ b/doc/board/ti/am6254atl_sk.rst
@@ -305,4 +305,4 @@ To start OpenOCD and connect to the board
 
 .. prompt:: bash $
 
-  openocd -f board/ti_am625evm.cfg
+   openocd -f board/ti/am625evm.cfg
diff --git a/doc/board/ti/am62ax_sk.rst b/doc/board/ti/am62ax_sk.rst
index 3453ed339e7..b04bfc991ea 100644
--- a/doc/board/ti/am62ax_sk.rst
+++ b/doc/board/ti/am62ax_sk.rst
@@ -435,4 +435,4 @@ To start OpenOCD and connect to the board
 
 .. prompt:: bash
 
-  openocd -f board/ti_am62a7evm.cfg
+   openocd -f board/ti/am62a7evm.cfg
diff --git a/doc/board/ti/am62dx_evm.rst b/doc/board/ti/am62dx_evm.rst
index 0d12e3ec147..88071b3e69d 100644
--- a/doc/board/ti/am62dx_evm.rst
+++ b/doc/board/ti/am62dx_evm.rst
@@ -237,10 +237,6 @@ detailed setup information.
 
 .. warning::
 
-  **AM62A**: OpenOCD support since August 2023 (git master)
-
-  **AM62D**: Uses AM62A configuration (compatible due to same core architecture)
-
   Until the next stable release of OpenOCD is available in your development
   environment's distribution, it might be necessary to build OpenOCD `from the
   source <https://github.com/openocd-org/openocd>`_.
@@ -253,4 +249,9 @@ To start OpenOCD and connect to the board
 
 .. prompt:: bash
 
-  openocd -f board/ti/am62a7evm.cfg
+   openocd -f board/ti/am62a7evm.cfg
+
+.. note::
+
+   The AM62D-EVM uses the same tcl configuration as the AM62A-SK due to
+   same core architecture.
diff --git a/doc/board/ti/am62px_sk.rst b/doc/board/ti/am62px_sk.rst
index 44dae4afc87..72de78d5f86 100644
--- a/doc/board/ti/am62px_sk.rst
+++ b/doc/board/ti/am62px_sk.rst
@@ -331,13 +331,11 @@ detailed setup information.
 
 .. warning::
 
-  **OpenOCD support after**: v0.12.0
+   **OpenOCD support after**: v0.12.0
 
-  While support for the entire K3 generation including the am62xxx
-  extended family was added before v0.12.0, the tcl scripts for the
-  am62px have been accepted and will be available in the next release of
-  OpenOCD. It may be necessary to build OpenOCD from source depending on
-  the version your distribution has packaged.
+   Until the next stable release of OpenOCD is available in your development
+   environment's distribution, it might be necessary to build OpenOCD `from the
+   source <https://github.com/openocd-org/openocd>`_.
 
 .. include::  k3.rst
     :start-after: .. k3_rst_include_start_openocd_connect_XDS110
@@ -347,4 +345,4 @@ To start OpenOCD and connect to the board
 
 .. prompt:: bash
 
-  openocd -f board/ti_am62pevm.cfg
+   openocd -f board/ti/am62pevm.cfg
diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst
index ef9425035cb..2e4923f7a7a 100644
--- a/doc/board/ti/am62x_sk.rst
+++ b/doc/board/ti/am62x_sk.rst
@@ -867,4 +867,4 @@ To start OpenOCD and connect to the board
 
 .. prompt:: bash $
 
-  openocd -f board/ti_am625evm.cfg
+   openocd -f board/ti/am625evm.cfg
diff --git a/doc/board/ti/am65x_evm.rst b/doc/board/ti/am65x_evm.rst
index 73ceef2e531..5f75c01ec65 100644
--- a/doc/board/ti/am65x_evm.rst
+++ b/doc/board/ti/am65x_evm.rst
@@ -321,4 +321,4 @@ To start OpenOCD and connect to the board
 
 .. prompt:: bash $
 
-  openocd -f board/ti_am654evm.cfg
+   openocd -f board/ti/am654evm.cfg
diff --git a/doc/board/ti/j7200_evm.rst b/doc/board/ti/j7200_evm.rst
index 4fd2aff8354..e5c29c2bbb7 100644
--- a/doc/board/ti/j7200_evm.rst
+++ b/doc/board/ti/j7200_evm.rst
@@ -232,4 +232,4 @@ To start OpenOCD and connect to the board
 
 .. prompt:: bash $
 
-  openocd -f board/ti_j7200evm.cfg
+   openocd -f board/ti/j7200evm.cfg
diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst
index 41c8d4c72a8..c3f3736e625 100644
--- a/doc/board/ti/j721e_evm.rst
+++ b/doc/board/ti/j721e_evm.rst
@@ -261,4 +261,4 @@ To start OpenOCD and connect to the board
 
 .. prompt:: bash $
 
-  openocd -f board/ti_j721eevm.cfg
+   openocd -f board/ti/j721evm.cfg
diff --git a/doc/board/ti/j722s_evm.rst b/doc/board/ti/j722s_evm.rst
index 4b5cf027594..3d11271613c 100644
--- a/doc/board/ti/j722s_evm.rst
+++ b/doc/board/ti/j722s_evm.rst
@@ -255,4 +255,4 @@ To start OpenOCD and connect to the board
 
 .. prompt:: bash
 
-  openocd -f board/ti_j722sevm.cfg
+   openocd -f board/ti/j722sevm.cfg
diff --git a/doc/board/ti/j784s4_evm.rst b/doc/board/ti/j784s4_evm.rst
index ec82228ab90..54b4b6031f0 100644
--- a/doc/board/ti/j784s4_evm.rst
+++ b/doc/board/ti/j784s4_evm.rst
@@ -663,4 +663,4 @@ following.
 
 .. prompt:: bash
 
-  openocd -f board/ti_j784s4evm.cfg
+   openocd -f board/ti/j784s4evm.cfg