kernel/git/next/linux-next.git/net/bluetooth, branch fs-next

next-20260914/vfs-brauner

2026-09-15T12:34:36+00:00

Merge branch 'vfs-7.4.shared.net-next.pidfd' into vfs.all

2026-09-11T14:00:43+00:00

Merge tag 'net-7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2026-09-10T21:07:48+00:00

Pull networking fixes from Jakub Kicinski: "Nothing too exciting, usual stream of fixes. Including fixes from Netfilter, Bluetooth and WPAN. Current release - new code bugs: - Bluetooth: hci_sync: fix not setting CE length properly - eth: enic: match mailbox replies to request numbers Previous releases - regressions: - tunnels: drop stale dst when building an ICMP error for PMTUD - ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings() (bug in the rtnl_lock -> RCU conversion) - eth: bnxt_en: - fix crashes on Thor2 due to OOB coalescing buffer accesses - prevent queue stop with deferred completions Previous releases - always broken: - eth: - ice: don't dereference pointers from TP_printk() - fix OOB writes on ethtool flow rule dump in 3 drivers - mlx5: fix FEC configuration with RS_544_514_INTERLEAVED_QUAD - dsa: tag_brcm: legacy FCS: request needed tailroom Misc: - net: cap tx_queue_len at S16_MAX to prevent oversized ring alloc - ipv6: flowlabel: cap duplicate leases per socket" * tag 'net-7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (164 commits) selftests: tc-testing: test action batch failure cleanup net/sched: act_api: release all action references on NEWACTION failure openvswitch: fix wrong flag value in get_ipv6_ext_hdrs() ipmr: account multicast table and route memory net: phy: dp83td510: handle the active-high LED polarity mode net: macb: initialize PTP state before registering clock net: hsr: enable promiscuous mode on interlink port with fwd offload ipv6: fix fib6 walker UAF on seq stop net: stmmac: fix TX descriptor availability check for TSO traffic net/rds: fix tcp stream corruption with large pages net: mana: restore the XDP program pointer when pre-allocation fails net: phy: dp83867: handle the active-high LED polarity mode octeontx2-af: fix PF/CGX debugfs PCI bus lookup net: net_failover: Fix the deadlock in net_failover_slave_name_change() net: phy: mediatek-ge: disable EEE on the MT7530 PHY tcp: reject non zerocopy devmem tx net: ethernet: mtk_eth_soc: populate lpi_interfaces to fix EEE support net: dsa: mt7530: populate lpi_interfaces to fix EEE support net: hinic: fix mailbox segment buffer overflow net: sun4i-emac: fix missing of_node_put() for phy_node ...

net: turn sk_peer_pid into an array indexed by pid type

2026-09-09T12:39:40+00:00

Currently only the struct pid of the thread-group leader is recorded for a socket's peer. To make room for the struct pid of the thread that called connect(), listen() or socketpair() turn sk_peer_pid into an array indexed by pid type. All users, including bluetooth and the coredump socket, keep using the PIDTYPE_TGID slot. Nothing fills the PIDTYPE_PID slot yet. No functional changes. Link: https://patch.msgid.link/20260909-work-unix-passpidfd-v2-5-7bd342abb2d1@kernel.org Reviewed-by: Alexander Mikhalitsyn Signed-off-by: Christian Brauner (Amutable)

Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del()

2026-09-08T21:12:45+00:00

A NULL pointer dereference in klist_put() occurs when a child device (such as a BNEP network device in bnep_session) is concurrently being unregistered while hci_conn_del_sysfs() reparents child devices. This is caused by a race condition between hci_conn_del_sysfs() and concurrent child device unregistration (e.g. bnep_session calling unregister_netdev()). During device unregistration, device_del() snapshots a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the child device using device_find_any_child() and calls device_move() to reparent it to NULL, which removes the node from its parent's klist and clears knode_parent. Subsequently, device_del() calls klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing klist_put() to dereference knode_klist(n)->put on an already removed node, resulting in a NULL pointer dereference. This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix use-after-free in device_for_each_child()"), which replaced device_find_child(..., __match_tty) with device_find_any_child() in hci_conn_del_sysfs(). That change was intended to avoid a use-after-free where conn->dev outlived its parent hdev->dev when child devices held references to conn->dev, because conn->dev only held a reference to hdev->dev while registered in sysfs. Fix the issue properly by taking an explicit reference to the parent device with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with put_device(parent) in bt_link_release() when the conn device is freed. This ensures that hdev->dev remains valid for the entire lifecycle of conn->dev, resolving the underlying use-after-free. With the parent reference held properly, restore the __match_tty filter in hci_conn_del_sysfs() so that device_move() is only invoked on persistent RFCOMM TTY devices as originally intended, eliminating the race condition with unregistering network devices. Fixes: 27aabf27fd01 ("Bluetooth: fix use-after-free in device_for_each_child()") Assisted-by: Gemini:gemini-3.7-flash syzbot Reported-by: syzbot+6df45dd3d03e1a9aca96@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6df45dd3d03e1a9aca96 Link: https://syzkaller.appspot.com/ai_job?id=f1c0e740-db21-40af-a9ff-84db0fd8b8bd Signed-off-by: Krystian Kaniewski Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_sync: Fix not setting CE length properly

2026-09-08T21:11:05+00:00

Both hci_le_set_def_rate_sync() and hci_le_conn_rate_request_sync() were leaving Min_CE_Length and Max_CE_Length set to 0x0000, but the connection event length recommended in requests by a Peripheral has a valid range of 0x0001 to 0x7CFF (Time = N * 125 us, Time Range: 0.125 ms to 3.999875 s), so 0x0000 cannot be used. Set both to the minimum valid value, which is safe since the Controller is not required to use these values: BLUETOOTH CORE SPECIFICATION Version 6.2 | Vol 4, Part E 7.8.157. LE Connection Rate Request command 7.8.158. LE Set Default Rate Parameters command The Min_CE_Length and Max_CE_Length parameters provide the Controller with the expected minimum and maximum length of the connection events. The Controller is not required to use these values. Fixes: 2f8784cfe8a9 ("Bluetooth: Add support for Shorter Connection Interval (SCI) feature") Signed-off-by: Luiz Augusto von Dentz

treewide: refresh kmalloc_obj() conversions

2026-09-05T04:37:00+00:00

This is another run of the Coccinelle script for converting kmalloc() family of allocations to kmalloc_obj() via the existing rules in scripts/coccinelle/api/kmalloc_objs.cocci This catches both the set of kmalloc() uses added since the first kmalloc_obj() conversions in v7.0 and adds a large group missed in the first pass due to Coccinelle not interacting well with the cleanup.h scoped_...() family of macros[1]. I worked around this with spatch's "--macro-file" argument to a file with all the scoped_...() macros mapped to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control flow indicator I could find. Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc, riscv, and s390 with no new warnings. Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1] Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2] Signed-off-by: Kees Cook

Bluetooth: L2CAP: clear FLAG_DEFER_SETUP only for same PID/PSM

2026-08-31T17:59:45+00:00

l2cap_ecred_defer_connect() clears FLAG_DEFER_SETUP also for channels with different PID/PSM, which will not be added to the same ECRED_CONN_REQ in any case. Consequently, only one ECRED connection group can work at a time although it appears intended they would be separate for each PID/PSM combination. Fix by clearing FLAG_DEFER_SETUP only for the connections that could be added in the request. Retain test_bit(FLAG_DEFER_SETUP) before calling get_peer_pid as it may be NULL otherwise. Fixes: da49b602f7f7 ("Bluetooth: L2CAP: Use DEFER_SETUP to group ECRED connections") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz

Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect

2026-08-31T17:57:52+00:00

l2cap_chan_connect() tries to ensure there are no more than L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs. However, the check only counts deferred channels. If 6 L2CAP sockets are connected at the same time in order DDDDND (D=deferred, N=non-deferred), the last can bump the total to max+1. It results to one __le16 written out of bounds of the scid array, and an invalid ECRED_CONN_REQ being sent. Fix by leaving room for the non-deferred pending ECRED channels in the counting in l2cap_chan_connect(), so the limit can't be exceeded. Move counting under same critical section where the channel is added. Although race conditions involving this appear unreachable, it's easier to see. Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this less brittle. Fixes: da49b602f7f7 ("Bluetooth: L2CAP: Use DEFER_SETUP to group ECRED connections") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz

Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan

2026-08-31T17:53:32+00:00

l2cap_new_connection() sets default value of channel mode to match the parent channel. l2cap_le_connect_req() left this at the default, and created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that mode. This causes FLAG_DEFER_SETUP channels to reply to L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect. It can also result to stack OOB write (of l2cap_alloc_cid determined values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not limit maximum number of deferred channels or check for duplicate ident. Fix by setting chan->mode correctly in l2cap_le_connect_req(). Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE instead of OOB write to make it less brittle. Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz