| Age | Commit message (Collapse) | Author |
|---|
|
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> says:
This series fixes some issues left to the first version
sof_ipc4_mod_init_ext_dp_memory_data payload building code. The
payload to specify memory requirements of Data Processing components,
running as independent processes in SOF firmware.
But more importantly it adds a payload of similar purpose to the
pipeline create message, e.g. sof_ipc4_glb_pipe_payload. It sums up
the memory requirements of individual Low Latency components in the
pipeline and sends the summed up values in pipeline create message.
Link: https://patch.msgid.link/20260730104141.14817-1-peter.ujfalusi@linux.intel.com
|
|
Fix a copy-paste error in struct sof_ipc4_mod_init_ext_dp_memory_data
datamember comments. And while at it, drop the overly specific notes
on the datamember values. The values are coming from topology and
and what to do with them is decided in SOF FW. Its a bad idea to try
to document their meaning in detail here. The Linux driver is only
passing the values.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730104141.14817-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adds SOF_IPC4_GLB_PIPE_EXT_OBJ_ARRAY macros to set extension bit in
SOF_IPC4_GLB_CREATE_PIPELINE indicating presence of the payload, and
all necessary macros and structs to create the payload.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730104141.14817-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The was inconsistency with SOF_TKN_COMP_STACK_BYTES_REQUIREMENT and
SOF_TKN_COMP_HEAP_BYTES_REQUIREMENT token ids in the Linux driver code
with SOF FW topology code. This commit fixes the Linux side to match
tools/topology/topology2/include/common/tokens.conf
Link: https://github.com/thesofproject/sof/blob/main/tools/topology/topology2/include/common/tokens.conf#L30
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730104141.14817-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Revert commit cfb5dc0f60fb ("thermal: hwmon: Use extra_groups for adding
temperature attributes") because it is depended on by another one that
turned out to be problematic.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1992232.tdWV9SEqCh@rafael.j.wysocki
|
|
Validate the functionality of LTL monitors by injecting events in a
controlled environment (KUnit) and expecting reactions, just like it is
done in DA monitors.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260723074534.43521-15-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Some monitors do not only rely on tracepoint arguments but also on the
currently executing task.
This makes it more challenging to mock events in KUnit.
Define wrapper functions around current, the functionality is mocked
only during KUnit, an additional function call is avoided using a static
branch unless any (even unrelated) KUnit test is running.
Rely on a global mock_current variable that is set only by the RV KUnit
tests and cleared on teardown. Unrelated KUnit tests that happen to
trigger RV handlers would see it null and use current.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Wen Yang <wen.yang@linux.dev>
Link: https://lore.kernel.org/r/20260723074534.43521-14-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Validate the functionality of DA monitors by injecting events in a
controlled environment (KUnit) and expecting reactions.
Events handlers are exported directly from the monitor source files
without using system events and with dummy arguments (e.g. no real
tasks). If the provided sequence of events incurs a violation, the test
expects the stub version of rv_react() to be called.
This testing method can validate the entire monitor implementation since
it sits between the monitor and the system (in place of the
tracepoints). All sorts of system and timing events can be emulated
without affecting the running kernel.
Handlers and monitor functions are exported as part of a struct to
simplify the process of running KUnit tests from kernel modules.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260723074534.43521-13-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
* pm-cpufreq:
cpufreq/amd-pstate: handle missing policy in dynamic EPP callbacks
cpufreq/amd-pstate: Cache the firmware programmed EPP value
cpufreq/amd-pstate: Toggle auto_sel in active mode on shared memory systems
cpufreq/amd-pstate: Fix EPP return type and handle errors during initialization
cpufreq: amd-pstate-ut: Skip tests when amd-pstate driver is not active
cpufreq: schedutil: Replace sprintf() with sysfs_emit() in sysfs show
cpufreq: schedutil: Fix self-contradictory comment in sugov_iowait_apply()
Documentation: admin-guide: cpufreq: fix sampling_rate example command
cpufreq: intel_pstate: Move two functions closer to callers
cpufreq: intel_pstate: Consolidate frequency values computation
cpufreq: intel_pstate: Introduce intel_pstate_update_freq_limits()
cpufreq: intel_pstate: Fix setting minimum P-state at init time
cpufreq: intel_pstate: Rename INTEL_PSTATE_HWP_BROADWELL
cpufreq: intel_pstate: Simplify HWP handling on Broadwell
cpufreq: intel_pstate: Adjust the .adjust_perf() driver callback
cpufreq: intel_pstate: Rearrange checks in hybrid_get_cost()
|
|
The bio-based drivers don't necessarily check the alignment split, and
stacking block drivers don't always handle a misalignment detected after
submitting the bio. Validate user vectors against the device's
dma_alignment as the bio is built from the iov_iter, rejecting
misaligned early with -EINVAL.
Cc: stable@vger.kernel.org
Fixes: 5ff3f74e145a ("block: simplify direct io validity check")
Fixes: 7eac33186957 ("iomap: simplify direct io validity check")
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://patch.msgid.link/20260720201057.1862857-6-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sashiko notes that playing games with the skb dst and rt
flags instead of providing hooknum is not a good idea
when validating the checksums.
Also, skipping checksum validation for FORWARD packets
risk silent data corruption, even if the only user is
the FTP-CMD packets coming from the real server.
Sashiko also noticed that by using common checksum
helper in the previous commit we actually fixed old bug
where the TCP/UDP checksum for IPv6 on CHECKSUM_COMPLETE
was not validated correctly.
Fixes: e876b75b9020 ("ipvs: fix the checksum validations")
Link: https://sashiko.dev/#/patchset/20260722211420.153933-1-pablo%40netfilter.org
Link: https://sashiko.dev/#/patchset/20260727185024.67534-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260728202520.59179-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Sashiko warns that local attacker can modify the packet
while it is processed by IPVS. Some places read the
IP ihl field multiple times which can cause out-of-bounds
access. One such place is ip_vs_nat_icmp where we
can write after the validated area.
Fix it by providing ciph argument just like it is done for
IPv6 and use ciph->len as offset to the embedded transport
header.
Modify some IPv4 header checks by reading the ihl field
only once.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://sashiko.dev/#/patchset/20260722101517.36313-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In the initial ipset rhashtable conversion RFC series syzbot reported
following splat:
BUG: sleeping function [..] at kernel/irq_work.c:289
in_atomic(): 1, [..]
irq_work_sync.. kernel/irq_work.c:289
rhashtable_free_and_destroy.. lib/rhashtable.c:1295
hash_netport4_destroy.. net/netfilter/ipset/ip_set_hash_gen.h:420
ip_set_destroy_set_rcu.. net/netfilter/ipset/ip_set_core.c:1169
rcu_core.. kernel/rcu/tree.c:2897
This is because post-rhashtable-conversion hash implementation needs
to schedule in the destroy callback. At this time this isn't allowed.
Replace existing call_rcu() based destruction with rcu_work api.
Also allows to undo split of set destruction and gc work cancelling in
a future patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The hash types do not acquire set->lock, they use 'region locking' where
only part of the hash table is locked. Parallel inserts and deletes are
possible and CPUs can race on ->ext_size update. Switch to atomic64_t.
This leaves another bug unresolved: there still can be a race on
comment extension re-init. This will be handled in a later commit
when converting to rhashtable backend.
Fixes: f66ee0410b1c ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Users of include/linux/memcontrol.h don't need to see this internal
structure. Further changes to the struct will reduce recompiling.
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Hao Li <hao.li@linux.dev>
Link: https://patch.msgid.link/20260727-b4-objext_split-v3-3-c29ef0f1f257@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
Add dst_entry to tunnel device path, this will allow us to remove
a duplicated route lookup.
This is a preparation patch to retrieve the tunnel route directly
from the .fill_forward_path. This new dst_entry in the tunnel will be
used by a follow up patch.
Since dst_release() works fine on NULL interface, this is still
noop until the flowtable starts using this.
Add a new dev_fill_forward_path_release() function to drop the refcount
on the tunnel device route and use it in case of error out. Export it so
to drop the refcount on the tunnel route at a later stage.
Adjust existing drivers that recycle dev_fill_forward_path() to call
dev_fill_forward_path_release() for safety reasons.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Resetting the PCMSyCM registers is required for Intel SoundWire stream. The
same procedure is done in sdw_hda_dai_hw_params() for the normal
SoundWire stream, too.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20260730012518.2180906-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
- document enums with the "enum" keyword
- add a description for @dbr_size
- add missing descriptions to struct most_interface (some just need
a ':' to be good)
- add missing descriptions to struct most_component
- use Returns: syntax for function return values
- convert most_deregister_interface() to kernel-doc notation and fix
its parameter name
Repairs these warnings:
Warning: include/linux/most.h:17 This comment starts with '/**',
but isn't a kernel-doc comment.
* Interface type
Warning: include/linux/most.h:32 This comment starts with '/**',
but isn't a kernel-doc comment.
* Channel direction.
Warning: include/linux/most.h:40 This comment starts with '/**',
but isn't a kernel-doc comment.
* Channel data type.
Warning: include/linux/most.h:131 struct member 'dbr_size' not
described in 'most_channel_config'
Warning: include/linux/most.h:191 This comment starts with '/**',
but isn't a kernel-doc comment.
* Interface instance description.
Warning: include/linux/most.h:274 struct member 'mod' not described
in 'most_component'
Warning: include/linux/most.h:274 struct member 'cfg_complete' not
described in 'most_component'
Warning: include/linux/most.h:288 This comment starts with '/**',
but isn't a kernel-doc comment.
* Deregisters instance of the interface.
Warning: include/linux/most.h:292 No description found for return value
of 'most_register_interface'
Warning: include/linux/most.h:298 function parameter 'iface' not
described in 'most_deregister_interface'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260719051123.2458641-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For any remote call to DSP, after sending an invocation message,
the fastRPC driver waits for a glink response, during which the CPU
can enter low power modes. This adds latency to the fastRPC call
due to CPU wakeup and scheduling overhead. Add polling mode support
where the fastRPC driver polls a shared memory location for
completion after sending the invocation, avoiding CPU wakeup and
scheduling latency and reducing fastRPC overhead. If the poll times
out, the call falls back to the normal interrupt/glink-based
completion path.
Poll mode is only applied to dynamic modules running in a user PD
(handle > FASTRPC_MAX_STATIC_HANDLE), since static/root-PD handles
are not expected to benefit from, or require, this optimization.
Support is advertised per SoC via fastrpc_soc_data, with a closed
exception list for older platforms whose DSP firmware is known to
support polling but which otherwise use the default soc_data.
Poll mode can be enabled by userspace via the FASTRPC_IOCTL_SET_OPTION
ioctl with the FASTRPC_POLL_MODE request id.
Since context IDs (ctxid) are allocated from a fixed-size, per-channel
cyclic IDR shared by all processes on a DSP, a context ID can be
recycled for a new request soon after it is freed. In poll mode the
context can be considered complete (and released) as soon as the poll
memory is updated, while the corresponding glink COMPLETE response
from the DSP may still be in flight. If that response arrives after
the ctxid has been reused, it would otherwise match the new context
and incorrectly signal completion for it while the DSP may still be
operating on the new context's buffers. To prevent this, embed a
monotonically increasing per-channel sequence number in the unused
upper bits of the ctxid/message context and validate it in the
rpmsg callback, dropping any response whose sequence number does not
match the current owner of that ctxid slot.
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260729094352.111065-8-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into char-misc-next
SoCFPGA firmware updates for v7.3
- Document stratix10-rsu for QSPI size and erase size
- Add method to retrieve device info table using RSU
- Add support for hardware monitoring using service driver
Resolves merge conflicts in:
drivers/firmware/stratix10-svc.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'svc_updates_for_v7.3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
hwmon: add Altera SoC FPGA hardware monitoring driver
firmware: stratix10-svc: add async HWMON read commands and register socfpga-hwmon device
firmware: stratix10-rsu: Add synchronous fallback for async SVC operations
firmware: stratix10-rsu: Add flash device info retrieval via SMC
Documentation: ABI: add stratix10-rsu QSPI size and erase_size sysfs
|
|
Align the rv_monitor variable name in LTL to the generic rv_this as it
is already done for DA/HA monitors. This improves consistency and eases
assumptions across model classes.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260723074534.43521-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
No caller checks the return value from stop_one_cpu_nowait(). All
callers require the callback to run and arrange for the target CPU's
stopper to remain enabled while queuing the work. In particular, commit
f0498d2a54e7 ("sched: Fix stop_one_cpu_nowait() vs hotplug") added
preemption protection to the scheduler callers so that queuing must
succeed once the target CPU has been observed online.
Therefore, a failure is an unrecoverable violation rather than a condition
individual callers can recover from. Diagnose it with WARN_ON_ONCE() in
stop_one_cpu_nowait(). A check in the common helper covers current and
future callers consistently, while individual checks would duplicate
the same non-recoverable handling at every call site.
Make the function return void because there is no longer a meaningful
result for callers to consume.
On UP, warn if the supplied CPU is not the current CPU because the work
cannot be scheduled in that case.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bradley Morgan <include@grrlz.net>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/20260729022355.325058-1-ynorov@nvidia.com
|
|
Have one ->iomap_next() callback instead of ->iomap_begin() and
->iomap_end(). ->iomap_next() finishes the previous mapping if needed,
and produces the next mapping.
Collapsing to a single callback lets a performance-critical caller
inline its iteration loop and pass its ->iomap_next() function as a
compile-time constant, so the compiler can devirtualize that callback
into a direct call instead of an indirect call through a function
pointer.
iomap_iter() uses ->iomap_next() when the filesystem provides that
callback and otherwise falls back to the ->iomap_begin()/->iomap_end()
path, so filesystems can be converted one at a time.
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260729192737.3190206-6-joannelkoong@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
The pending iomap_iter_next conversion creates performance issues for the
new simple direct I/O read fast path, because it assumes a model where
the iterator must be advanced at the end, which the direct I/O read fast
path tries to avoid.
Side step this by splitting the simple path from iomap_dio_rw, and
require the file systems to call into it explicitly, and pass only a
->begin callback. This allows to drop various checks for incompatible
features while creating a requirement for the file system to only call
the simple path for cases that it can handle.
As a side-benefit we can now inline the initial part of the simple
direct I/O read fast path and let the compiler convert the indirect call
to ->begin into a direct call.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Fengnan Chang <changfengnan@bytedance.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260729192737.3190206-4-joannelkoong@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
In preparation for changing iomap to use an in-iter (->iomap_next())
model, move the iomap_iter() logic out into the new iomap_iter_next()
helper function.
iomap_iter_next() is added as an inlined helper so it can be called
directly by ->iomap_next() implementations where the begin()/end()
callbacks can be direct calls.
The DEFINE_IOMAP_ITER_NEXT() and DEFINE_IOMAP_ITER_NEXT_END() macros are
also provided to generate the boilerplate ->iomap_next() wrapper
functions that simply forward to iomap_iter_next() with the appropriate
begin/end callbacks. DEFINE_IOMAP_ITER_NEXT() is for the common case
where there is no end() callback. DEFINE_IOMAP_ITER_NEXT_END() is for
the case where there is an explicit end() callback.
No functional change intended. The one would-be behavioral difference is
that on the iomap_end() error path (ret < 0 && !advanced), the old code
returned with iter.status left as the caller's last value whereas the
new code zeroes it, but this is not observable in practice as there are
no in-tree callers that read iter.status after the iteration loop.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Fengnan Chang <changfengnan@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260729192737.3190206-3-joannelkoong@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Add an exported helper iomap_folio_mark_uptodate() to mark a folio as
uptodate and update its uptodate bitmap if the folio has iomap state
data attached.
This is needed because there are some filesystems (eg fuse) that have
paths outside of conventional iomap calls that need to mark a folio as
uptodate (eg writing server-pushed data directly into the page cache)
and need the iomap-internal uptodate bitmap to be in sync with the
uptodate state of the folio.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260707220450.1200943-3-joannelkoong@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Current implementation isn't working well when device tree nodes have a
phandle on a fixed-layout nvmem node. As the fixed layout is handled in
nvmem core, no driver is ever associated with the layout, and the device
consumer driver probe is deferred indefinitely.
Remove the specific handling of fixed-layout and add a layout driver.
This makes the fixed-layout similar to all other layouts, fixing the
whole issue.
Fixes: fc29fd821d9a ("nvmem: core: Rework layouts to become regular devices")
Cc: stable@vger.kernel.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223404.629248-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize now
on the __ASSEMBLER__ macro that is provided by the compilers.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260619124936.208519-1-thuth@redhat.com
|
|
The only time that 'false' is passed as the 'excl' arg to the ->create
inode_operation is in lookup_open() when ->atomic_open is not provided
by the parent directory.
*all* directory inode_operations which do not have ->atomic_open
completely ignore the 'excl' arg.
Therefore we don't need the 'excl' arg. Those few ->create operations
which pay attention to the arg are only ever called with a value of
'true'.
We remove that arg and change all ->create operations to behave as those
thhe arg were 'true'.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/178290671516.27465.15984496764174914338@noble.neil.brown.name
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
The symbol mangle_path conflicts with a gcov symbol which
can break the build of ARCH=um with gcov, and it's also
not very specific and descriptive.
Rename mangle_path() to seq_mangle_path(), and also remove
the export since it's not needed or used by any modules.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Link: https://patch.msgid.link/20260727195730.2306887-1-alex.hung@amd.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
1. put the dead val into a macro so that it can be used in other places
2. __lockref_is_dead():
- drop the __ suffix, this is not an internal routine
- drop the spurious cast, the value is already a signed int
- use READ_ONCE to prevent any compile shenanigans
3. provide lockref_is_dead_or_zero()
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20260724171422.429284-2-mjguzik@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
- drop non-existent @filter
- add missing descriptions for @ns_type and @spare2
- change the descriptions of @ns_id and @user_ns_id based on their commit
to prevent these kernel-doc warnings:
Warning: ../include/uapi/linux/nsfs.h:117 struct member 'ns_type' not
described in 'ns_id_req'
Warning: ../include/uapi/linux/nsfs.h:117 struct member 'spare2' not
described in 'ns_id_req'
Warning: ../include/uapi/linux/nsfs.h:117 Excess struct member 'filter'
description in 'ns_id_req'
Fixes: 76b6f5dfb3fd ("nstree: add listns()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260724031021.814599-1-rdunlap@infradead.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Pipes keep two separate page caches:
a) The per-pipe, lock-protected tmp_page[2]
b) An on-stack anon_pipe_prealloc burst pool of up to eight pages
filled before the lock
Converge them into a single per-pipe pool (struct anon_pipe_prealloc
embedded in pipe_inode_info) with the same budget as before: up to
PIPE_PREALLOC_MAX (8) pages, trimmed back to PIPE_PREALLOC_KEEP (2)
after each operation. tmp_page[2] is removed.
Pages are still allocated and freed outside pipe->mutex; only the
assignment into the pool is done under it. The pool count is also read
locklessly in the prefill path, so it is annotated __data_racy.
anon_pipe_prefill_and_lock() tops the pool up to the write's page count
-- and returns with pipe->mutex held, so a write acquires the lock only
once.
anon_pipe_trim_and_unlock() trims the pool under that same lock before
dropping it, then frees the excess.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260720-b4-pipe-unification-v5-1-9002a3fe5e6d@debian.org
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
syzbot reported a KCSAN race between fill_mg_cmtime() and
inode_set_ctime_to_ts() on inode->i_ctime_{sec,nsec}.
stat/getattr can sample inode timestamps while update paths store new
values concurrently, so KCSAN can report benign races on these fields.
Annotate the timestamp accessors with READ_ONCE()/WRITE_ONCE(), and use
the ctime accessor for the remaining ctime loads. This avoids the KCSAN
reports without changing timestamp semantics.
Fixes: 4e40eff0b573 ("fs: add infrastructure for multigrain timestamps")
Reported-by: syzbot+8b3bd9f8a06658479d4a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8b3bd9f8a06658479d4a
Signed-off-by: Yu Peng <pengyu@kylinos.cn>
Link: https://patch.msgid.link/20260708080232.2564807-1-pengyu@kylinos.cn
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Add support for devices using SETAASA, such as SPD5118 and SPD5108
attached to DDR5 memory modules that do not support ENTDAA. Follow the
guidelines proposed by the MIPI Discovery and Configuration
Specification [1] for discovering such devices.
SETAASA (Set All Addresses to Static Address) differs from standard I3C
address assignment that uses ENTDAA or SETDASA to assign dynamic
addresses. Devices using SETAASA assign their pre-defined static addresses
as their dynamic addresses during DAA, and it is not mandatory for these
devices to implement standard CCC commands like GETPID, GETDCR, or GETBCR.
For such devices, it is generally recommended to issue SETHID (specified
by JEDEC JESD300) as a prerequisite for SETAASA to stop HID bit flipping.
[1] https://www.mipi.org/mipi-disco-for-i3c-download
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Link: https://www.mipi.org/mipi-disco-for-i3c-download
Link: https://patch.msgid.link/20260728065955.809445-5-akhilrajeev@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Replace all OF-specific functions with unified device property functions
as a prerequisite to support both ACPI and device tree.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Link: https://patch.msgid.link/20260728065955.809445-3-akhilrajeev@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add the 'mipi-i3c-static-method' property mentioned in the MIPI I3C
Discovery and Configuration Specification [1] to specify which discovery
method an I3C device supports during bus initialization. The property is
a bitmap, where a bit value of 1 indicates support for that method, and 0
indicates lack of support.
Bit 0: SETDASA CCC (Direct)
Bit 1: SETAASA CCC (Broadcast)
Bit 2: Other CCC (vendor / standards extension)
All other bits are reserved.
It is specifically needed when an I3C device requires SETAASA for the
address assignment. SETDASA will be supported by default if this property
is absent, which means for now the property just serves as a flag to
enable SETAASA, but keep the property as a bitmap to align with the
specifications.
[1] https://www.mipi.org/mipi-disco-for-i3c-download
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Link: https://patch.msgid.link/20260728065955.809445-2-akhilrajeev@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add optional_bytes to struct i3c_ccc_cmd_payload so callers describe
variable-length GET CCC responses. GETMRL and GETMXDS set optional_bytes
at the call site. Extend i3c_ccc_validate_payload_len() to honour it.
Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://patch.msgid.link/2e07dc944eab1c4358be1da87fa5000e711ac8bd.1783493868.git.tze.yee.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add retries to struct i3c_ccc_cmd. Validate GET payload length in
i3c_master_send_ccc_cmd_locked() after a successful transfer.
Retry failed Direct GET CCCs up to cmd->retries times when the driver
reports failure or an I3C error; validation failures are not retried.
SET CCCs are not retried by default.
Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://patch.msgid.link/b467f01edfaaa0710f30e719ce7f2753b06c1a3f.1783493868.git.tze.yee.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add actual_len to struct i3c_ccc_cmd_payload so drivers can report how
many bytes were received on a GET CCC without overwriting the requested
buffer length in len.
Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
Link: https://patch.msgid.link/e452777c3a9be734a97e20b9822d8a4264ceadba.1783493868.git.tze.yee.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Move kvm_psci_valid_affinity() and kvm_psci_narrow_to_32bit() from
psci.c to include/kvm/arm_psci.h, and move psci_affinity_mask() there
too, renaming it kvm_psci_affinity_mask() now that it is no longer
file-local. A follow-up series handles some protected-guest PSCI calls
at EL2 using these helpers.
No functional change intended.
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Link: https://patch.msgid.link/20260729131823.2021516-5-fuad.tabba@linux.dev
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
SWIOTLB_FORCE has no remaining in-tree users. Forced bouncing is now
controlled through the swiotlb=force command line option via
swiotlb_force_bounce.
Remove the unused flag and simplify the force_bounce initialization.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Link: https://lore.kernel.org/r/20260717180442.110954-24-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
swiotlb_dyn_free() is used after removing a dynamic swiotlb pool from
RCU-protected lists. It can call swiotlb_free_tlb(), which may need to
restore the encryption state of an unencrypted pool with
set_memory_encrypted() before freeing the pages.
RCU callbacks run in atomic context, but set_memory_encrypted() is not
guaranteed to be atomic-safe on all architectures. For example, page
attribute updates may allocate page tables or take sleeping locks.
Use queue_rcu_work() for dynamic pool freeing instead. This keeps the RCU
grace period before freeing a published pool, while running the actual pool
teardown from workqueue context. Use the same helper for the transient-pool
error path, since that path may also be reached from atomic DMA mapping
context.
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Link: https://lore.kernel.org/r/20260717180442.110954-22-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Teach dma_capable() about DMA_ATTR_CC_SHARED so the capability
check can reject encrypted DMA addresses for devices that require
unencrypted/shared DMA.
Also propagate DMA_ATTR_CC_SHARED in swiotlb_map() when the selected
SWIOTLB pool is decrypted so the capability check sees the correct DMA
address attribute.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Link: https://lore.kernel.org/r/20260717180442.110954-16-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Teach swiotlb to distinguish between encrypted and decrypted bounce
buffer pools, and make allocation and mapping paths select a pool whose
state matches the requested DMA attributes.
Add a cc_shared flag to io_tlb_mem, initialize it for the default and
restricted pools, and propagate __DMA_ATTR_ALLOC_CC_SHARED into swiotlb
pool allocation. Reject swiotlb alloc/map requests when the selected pool
does not match the required encrypted/decrypted state.
Also return DMA addresses with the matching phys_to_dma_{encrypted,
unencrypted} helper so the DMA address encoding stays consistent with the
chosen pool.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Link: https://lore.kernel.org/r/20260717180442.110954-14-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Change swiotlb_tbl_map_single() to take the DMA mapping attributes by
reference and update the direct callers accordingly.
This is a preparatory change for a follow-up patch which updates the
attributes based on the selected swiotlb pool. Keeping the signature change
separate makes the follow-up patch easier to review.
No functional change in this patch.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Link: https://lore.kernel.org/r/20260717180442.110954-13-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Teach the atomic DMA pool code to distinguish between encrypted and
unencrypted pools, and make pool allocation select the matching pool based
on DMA attributes.
Introduce a dma_gen_pool wrapper that records whether a pool is
unencrypted, initialize that state when the atomic pools are created, and
use it when expanding and resizing the pools. Update dma_alloc_from_pool()
to take attrs and skip pools whose encrypted state does not match
__DMA_ATTR_ALLOC_CC_SHARED. Update dma_free_from_pool() accordingly.
Also pass __DMA_ATTR_ALLOC_CC_SHARED from the swiotlb atomic allocation
path so decrypted swiotlb allocations are taken from the correct atomic
pool.
Tested-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Link: https://lore.kernel.org/r/20260717180442.110954-12-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
DMA_ATTR_CC_SHARED describes an existing DMA mapping whose backing memory
is already shared, or decrypted, for confidential computing. It is a
mapping attribute: callers use it to request a shared DMA address encoding
for memory that has already been prepared for shared DMA.
Allocation paths need a related but different state. Once the DMA core
decides that an allocation must use shared backing pages, the lower-level
allocation helpers need to select shared pools, decrypt newly allocated
pages, derive the DMA address with the shared-memory translation and
restore encryption on free. That state is internal to the DMA-mapping
implementation and should not be passed by drivers to dma_alloc_attrs().
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20260717180442.110954-10-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Move swiotlb allocation out of __dma_direct_alloc_pages() and handle it in
dma_direct_alloc() / dma_direct_alloc_pages().
This is needed for follow-up changes that simplify the handling of
memory encryption/decryption based on the DMA attribute flags.
swiotlb backing pages are already mapped decrypted by
swiotlb_update_mem_attributes() and rmem_swiotlb_device_init(), so
dma-direct should not call dma_set_decrypted() on allocation nor
dma_set_encrypted() on free for swiotlb-backed memory.
Update alloc/free paths to detect swiotlb-backed pages and skip
encrypt/decrypt transitions for those paths. Keep the existing highmem
rejection in dma_direct_alloc_pages() for swiotlb allocations.
Only for "restricted-dma-pool", we currently set `for_alloc = true`, while
rmem_swiotlb_device_init() decrypts the whole pool up front. This pool is
typically used together with "shared-dma-pool", where the shared region is
accessed after remap/ioremap and the returned address is suitable for
decrypted memory access. So existing code paths remain valid.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20260717180442.110954-8-aneesh.kumar@kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
