From a67c78364f8b3312d36c3518fe839af8f8385101 Mon Sep 17 00:00:00 2001 From: Prasad Kumpatla Date: Fri, 21 Aug 2026 17:05:47 +0530 Subject: dt-bindings: pinctrl: qcom,hawi-lpass-lpi-pinctrl: Add Hawi LPI pinctrl Add bindings for the pin controller in Low Power Audio SubSystem (LPASS) of Qualcomm Hawi SoC. The controller has 23 GPIOs (gpio0-gpio22) with functions including SoundWire, I2S, DMIC, VA I2S, ext_mclk1, slimbus and lpass_lpi_dbg_clk. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Prasad Kumpatla Link: https://patch.msgid.link/20260821113548.2686650-2-prasad.kumpatla@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- .../pinctrl/qcom,hawi-lpass-lpi-pinctrl.yaml | 109 +++++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,hawi-lpass-lpi-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,hawi-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,hawi-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..af68581750cf --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,hawi-lpass-lpi-pinctrl.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,hawi-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Hawi SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski + - Srinivas Kandagatla + - Prasad Kumpatla + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm Hawi SoC. + +properties: + compatible: + const: qcom,hawi-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + + clocks: + items: + - description: LPASS LPR(Low Power Resource) voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: lpr + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-hawi-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-hawi-lpass-state" + additionalProperties: false + +$defs: + qcom-hawi-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, + lpass_lpi_dbg_clk, qca_swr_clk, qca_swr_data, slimbus_clk, + slimbus_data, swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_clk1, + swr_tx_data, va_i2s0_clk, va_i2s0_data, va_i2s0_ws, + wsa2_swr_clk, wsa2_swr_data, wsa_swr_clk, wsa_swr_data] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include + + lpass_tlmm: pinctrl@7f60000 { + compatible = "qcom,hawi-lpass-lpi-pinctrl"; + reg = <0x07f60000 0x20000>; + + clocks = <&q6prmcc LPASS_HW_LPR_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "lpr", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; + }; -- cgit v1.2.3 From 6f168dea0db7bf35089a7fe942f1df6214464fcc Mon Sep 17 00:00:00 2001 From: Prasad Kumpatla Date: Fri, 21 Aug 2026 17:05:48 +0530 Subject: pinctrl: qcom: hawi-lpass-lpi: add Hawi LPASS LPI TLMM Add pin controller driver for the Low Power Audio SubSystem (LPASS) Low Power Island (LPI) of Qualcomm Hawi SoC. The controller has 23 GPIOs with SoundWire, I2S, DMIC, VA I2S, ext_mclk1 and slimbus mux functions. Two pins (gpio13, gpio22) require 6 mux slots due to a test_bus entry occupying a middle hardware slot. Add LPI_PINGROUP6 macro to pinctrl-lpass-lpi.h to support pins with 5 alternate functions. Reviewed-by: Konrad Dybcio Signed-off-by: Prasad Kumpatla Link: https://patch.msgid.link/20260821113548.2686650-3-prasad.kumpatla@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/pinctrl/qcom/Kconfig | 10 ++ drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-hawi-lpass-lpi.c | 244 ++++++++++++++++++++++++++ drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 17 ++ 4 files changed, 272 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-hawi-lpass-lpi.c diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index 18db350222b9..707067b9251f 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -62,6 +62,16 @@ config PINCTRL_LPASS_LPI Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI (Low Power Island) found on the Qualcomm Technologies Inc SoCs. +config PINCTRL_HAWI_LPASS_LPI + tristate "Qualcomm Technologies Inc Hawi LPASS LPI pin controller driver" + depends on ARM64 || COMPILE_TEST + depends on PINCTRL_LPASS_LPI + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI + (Low Power Island) found on the Qualcomm Technologies Inc Hawi + platform. + config PINCTRL_MILOS_LPASS_LPI tristate "Qualcomm Milos LPASS LPI pin controller driver" depends on ARM64 || COMPILE_TEST diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 43ecd246afe8..987a79f9d4c4 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o obj-$(CONFIG_PINCTRL_ELIZA) += pinctrl-eliza.o obj-$(CONFIG_PINCTRL_GLYMUR) += pinctrl-glymur.o obj-$(CONFIG_PINCTRL_HAWI) += pinctrl-hawi.o +obj-$(CONFIG_PINCTRL_HAWI_LPASS_LPI) += pinctrl-hawi-lpass-lpi.o obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o obj-$(CONFIG_PINCTRL_IPQ5018) += pinctrl-ipq5018.o obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o diff --git a/drivers/pinctrl/qcom/pinctrl-hawi-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-hawi-lpass-lpi.c new file mode 100644 index 000000000000..7036bf4c6692 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-hawi-lpass-lpi.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include +#include +#include +#include +#include + +#include "pinctrl-lpass-lpi.h" + +enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_dmic4_clk, + LPI_MUX_dmic4_data, + LPI_MUX_ext_mclk1_a, + LPI_MUX_ext_mclk1_b, + LPI_MUX_ext_mclk1_c, + LPI_MUX_ext_mclk1_d, + LPI_MUX_ext_mclk1_e, + LPI_MUX_i2s0_clk, + LPI_MUX_i2s0_data, + LPI_MUX_i2s0_ws, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_i2s3_clk, + LPI_MUX_i2s3_data, + LPI_MUX_i2s3_ws, + LPI_MUX_lpass_lpi_dbg_clk, + LPI_MUX_qca_swr_clk, + LPI_MUX_qca_swr_data, + LPI_MUX_slimbus_clk, + LPI_MUX_slimbus_data, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_clk1, + LPI_MUX_swr_tx_data, + LPI_MUX_va_i2s0_clk, + LPI_MUX_va_i2s0_data, + LPI_MUX_va_i2s0_ws, + LPI_MUX_wsa2_swr_clk, + LPI_MUX_wsa2_swr_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +}; + +static const struct pinctrl_pin_desc hawi_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), + PINCTRL_PIN(14, "gpio14"), + PINCTRL_PIN(15, "gpio15"), + PINCTRL_PIN(16, "gpio16"), + PINCTRL_PIN(17, "gpio17"), + PINCTRL_PIN(18, "gpio18"), + PINCTRL_PIN(19, "gpio19"), + PINCTRL_PIN(20, "gpio20"), + PINCTRL_PIN(21, "gpio21"), + PINCTRL_PIN(22, "gpio22"), +}; + +static const char * const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", +}; + +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const i2s0_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio14" }; +static const char * const i2s0_ws_groups[] = { "gpio1" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const i2s0_data_groups[] = { "gpio2", "gpio3", "gpio4", "gpio5" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; +static const char * const ext_mclk1_c_groups[] = { "gpio5" }; +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const va_i2s0_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const va_i2s0_ws_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const va_i2s0_data_groups[] = { "gpio8", "gpio9" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const ext_mclk1_b_groups[] = { "gpio9" }; +static const char * const i2s1_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const i2s1_ws_groups[] = { "gpio11" }; +static const char * const wsa_swr_data_groups[] = { "gpio11", "gpio21" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const i2s3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const i2s3_ws_groups[] = { "gpio13" }; +static const char * const ext_mclk1_a_groups[] = { "gpio13" }; +static const char * const lpass_lpi_dbg_clk_groups[] = { "gpio13" }; +static const char * const swr_tx_clk1_groups[] = { "gpio14" }; +static const char * const ext_mclk1_d_groups[] = { "gpio14" }; +static const char * const i2s1_data_groups[] = { "gpio15", "gpio16", "gpio21", "gpio22" }; +static const char * const wsa2_swr_clk_groups[] = { "gpio15" }; +static const char * const wsa2_swr_data_groups[] = { "gpio16", "gpio22" }; +static const char * const dmic4_clk_groups[] = { "gpio17" }; +static const char * const i2s3_data_groups[] = { "gpio17", "gpio18" }; +static const char * const dmic4_data_groups[] = { "gpio18" }; +static const char * const i2s2_clk_groups[] = { "gpio19" }; +static const char * const slimbus_clk_groups[] = { "gpio19" }; +static const char * const qca_swr_clk_groups[] = { "gpio19" }; +static const char * const i2s2_ws_groups[] = { "gpio20" }; +static const char * const slimbus_data_groups[] = { "gpio20" }; +static const char * const qca_swr_data_groups[] = { "gpio20" }; +static const char * const i2s2_data_groups[] = { "gpio21", "gpio22" }; +static const char * const ext_mclk1_e_groups[] = { "gpio22" }; + +static const struct lpi_pingroup hawi_groups[] = { + LPI_PINGROUP(0, 11, swr_tx_clk, i2s0_clk, _, _), + LPI_PINGROUP(1, 11, swr_tx_data, i2s0_ws, _, _), + LPI_PINGROUP(2, 11, swr_tx_data, i2s0_data, _, _), + LPI_PINGROUP(3, 11, swr_rx_clk, i2s0_data, _, _), + LPI_PINGROUP(4, 11, swr_rx_data, i2s0_data, _, _), + LPI_PINGROUP(5, 11, swr_rx_data, ext_mclk1_c, i2s0_data, _), + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, va_i2s0_clk, _, _), + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, va_i2s0_ws, _, _), + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, va_i2s0_data, _, _), + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, va_i2s0_data, ext_mclk1_b, _), + LPI_PINGROUP(10, 11, i2s1_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 11, i2s1_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s3_clk, _, _), + LPI_PINGROUP6(13, LPI_NO_SLEW, dmic3_data, i2s3_ws, ext_mclk1_a, _, lpass_lpi_dbg_clk), + LPI_PINGROUP(14, 11, swr_tx_data, swr_tx_clk1, ext_mclk1_d, _), + LPI_PINGROUP(15, 11, i2s1_data, wsa2_swr_clk, _, _), + LPI_PINGROUP(16, 11, i2s1_data, wsa2_swr_data, _, _), + LPI_PINGROUP(17, LPI_NO_SLEW, dmic4_clk, i2s3_data, _, _), + LPI_PINGROUP(18, LPI_NO_SLEW, dmic4_data, i2s3_data, _, _), + LPI_PINGROUP(19, LPI_NO_SLEW, i2s2_clk, slimbus_clk, qca_swr_clk, _), + LPI_PINGROUP(20, LPI_NO_SLEW, i2s2_ws, slimbus_data, qca_swr_data, _), + LPI_PINGROUP(21, 11, i2s2_data, _, wsa_swr_data, i2s1_data), + LPI_PINGROUP6(22, 11, i2s2_data, ext_mclk1_e, _, i2s1_data, wsa2_swr_data), +}; + +static const struct lpi_function hawi_functions[] = { + LPI_FUNCTION(gpio), + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(dmic4_clk), + LPI_FUNCTION(dmic4_data), + LPI_FUNCTION(ext_mclk1_a), + LPI_FUNCTION(ext_mclk1_b), + LPI_FUNCTION(ext_mclk1_c), + LPI_FUNCTION(ext_mclk1_d), + LPI_FUNCTION(ext_mclk1_e), + LPI_FUNCTION(i2s0_clk), + LPI_FUNCTION(i2s0_data), + LPI_FUNCTION(i2s0_ws), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(i2s3_clk), + LPI_FUNCTION(i2s3_data), + LPI_FUNCTION(i2s3_ws), + LPI_FUNCTION(lpass_lpi_dbg_clk), + LPI_FUNCTION(qca_swr_clk), + LPI_FUNCTION(qca_swr_data), + LPI_FUNCTION(slimbus_clk), + LPI_FUNCTION(slimbus_data), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_clk1), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(va_i2s0_clk), + LPI_FUNCTION(va_i2s0_data), + LPI_FUNCTION(va_i2s0_ws), + LPI_FUNCTION(wsa2_swr_clk), + LPI_FUNCTION(wsa2_swr_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), +}; + +static const struct lpi_pinctrl_variant_data hawi_lpi_data = { + .pins = hawi_lpi_pins, + .npins = ARRAY_SIZE(hawi_lpi_pins), + .groups = hawi_groups, + .ngroups = ARRAY_SIZE(hawi_groups), + .functions = hawi_functions, + .nfunctions = ARRAY_SIZE(hawi_functions), + .flags = LPI_FLAG_SLEW_RATE_SAME_REG, +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,hawi-lpass-lpi-pinctrl", + .data = &hawi_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static const struct dev_pm_ops lpi_pinctrl_pm_ops = { + RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL) +}; + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-hawi-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + .pm = pm_ptr(&lpi_pinctrl_pm_ops), + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("Qualcomm Hawi LPI GPIO pin control driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h index 6ba0c4eba984..056c4a774389 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -92,6 +92,23 @@ struct pinctrl_pin_desc; .pin_offset = 0, \ } +#define LPI_PINGROUP6(id, soff, f1, f2, f3, f4, f5) \ + { \ + .pin = id, \ + .slew_offset = soff, \ + .slew_base_spare_1 = false, \ + .funcs = (int[]){ \ + LPI_MUX_gpio, \ + LPI_MUX_##f1, \ + LPI_MUX_##f2, \ + LPI_MUX_##f3, \ + LPI_MUX_##f4, \ + LPI_MUX_##f5, \ + }, \ + .nfuncs = 6, \ + .pin_offset = 0, \ + } + /* * Slew rate control is done in the same register as rest of the * pin configuration. -- cgit v1.2.3 From 25f42a33ecf914e6d8da6eed2cdf7ad86c9a904b Mon Sep 17 00:00:00 2001 From: Dhruvin Rajpura Date: Sun, 30 Aug 2026 12:29:38 +0800 Subject: dt-bindings: pinctrl: qcom,pmic-gpio: Document PMAU0102 GPIO support Add compatible string for the PMAU0102 PMIC GPIO block, which has 12 GPIOs, used on Nord platform. Signed-off-by: Dhruvin Rajpura Signed-off-by: Shawn Guo Acked-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20260830042939.144376-2-shengchao.guo@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index c27e24cb206f..77be0690c751 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -57,6 +57,7 @@ properties: - qcom,pm8994-gpio - qcom,pm8998-gpio - qcom,pma8084-gpio + - qcom,pmau0102-gpio - qcom,pmc8180-gpio - qcom,pmc8180c-gpio - qcom,pmc8380-gpio @@ -281,6 +282,7 @@ allOf: - qcom,pm8150l-gpio - qcom,pm8550-gpio - qcom,pm8550b-gpio + - qcom,pmau0102-gpio - qcom,pmc8180c-gpio - qcom,pmp8074-gpio - qcom,pms405-gpio @@ -496,6 +498,7 @@ $defs: - gpio1-gpio22 for pm8994 - gpio1-gpio26 for pm8998 - gpio1-gpio22 for pma8084 + - gpio1-gpio12 for pmau0102 - gpio1-gpio14 for pmcx0102 - gpio1-gpio4 for pmd8028 - gpio1-gpio4 for pmg1110 -- cgit v1.2.3 From 1cc8b87bd9719f5c496d27a1b4d2892947ba70d5 Mon Sep 17 00:00:00 2001 From: Dhruvin Rajpura Date: Sun, 30 Aug 2026 12:29:39 +0800 Subject: pinctrl: qcom: spmi-gpio: Add PMAU0102 GPIO support Add support for the PMAU0102 PMIC GPIO block, which has 12 GPIOs, used on Nord platform. Signed-off-by: Dhruvin Rajpura Signed-off-by: Shawn Guo Link: https://patch.msgid.link/20260830042939.144376-3-shengchao.guo@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 922c27177b5a..f6dc43e27b38 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -1259,6 +1259,7 @@ static const struct of_device_id pmic_gpio_of_match[] = { { .compatible = "qcom,pm8994-gpio", .data = (void *) 22 }, { .compatible = "qcom,pm8998-gpio", .data = (void *) 26 }, { .compatible = "qcom,pma8084-gpio", .data = (void *) 22 }, + { .compatible = "qcom,pmau0102-gpio", .data = (void *) 12 }, { .compatible = "qcom,pmc8380-gpio", .data = (void *) 10 }, { .compatible = "qcom,pmcx0102-gpio", .data = (void *)14 }, { .compatible = "qcom,pmd8028-gpio", .data = (void *) 4 }, -- cgit v1.2.3 From 7d65a9c8fa31e04f41bec15fc4a4f51e207d2aba Mon Sep 17 00:00:00 2001 From: Hardeep Sharma Date: Thu, 27 Aug 2026 23:21:11 +0530 Subject: dt-bindings: pinctrl: qcom: Add Kuno TLMM Add device tree bindings for the Top Level Mode Multiplexer (TLMM) pin controller block found on the Qualcomm Kuno platform. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Hardeep Sharma Link: https://patch.msgid.link/20260827-kuno-soc-support-v5-8-6d47636a8f09@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- .../bindings/pinctrl/qcom,kuno-tlmm.yaml | 110 +++++++++++++++++++++ 1 file changed, 110 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,kuno-tlmm.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,kuno-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,kuno-tlmm.yaml new file mode 100644 index 000000000000..2250526dfae2 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,kuno-tlmm.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,kuno-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Kuno TLMM block + +maintainers: + - Hardeep Sharma + +description: + Top Level Mode Multiplexer pin controller in Qualcomm Kuno SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,kuno-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 55 + + gpio-line-names: + maxItems: 110 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-kuno-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-kuno-tlmm-state" + additionalProperties: false + +$defs: + qcom-kuno-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9])$" + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, audio_ref_clk, coex_uart, ebi2_lcd_a, + ebi2_lcd_cs, ebi2_lcd_reset, ebi2_lcd_te, emac_mdc, emac_mdio, + emac_pps_in, emac_ptp_aux, emac_ptp_pps, gcc_gp1_clk, + gcc_gp2_clk, gcc_gp3_clk, mi2s0_data0, mi2s0_data1, mi2s0_sck, + mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, + mi2s_mclk, nav_gpio, pci_e_rst, + pcie_clkreq_n, pll_bist_sync, pll_clk_aux, qdss_cti_trig0, + qdss_cti_trig1, qdss_cti_trig1_mire, qdss_gpio_traceclk, + qdss_gpio_tracectl, + qup0_se0, qup0_se1, qup0_se2, qup0_se3_mira, qup0_se3_mirb, + qup0_se4, sdc4_clk, sdc4_cmd, + sdc4_data, sdc4_tb_trig, sgmii_phy_intr, spmi_coex_clk, + spmi_coex_data, spmi_vgi_hwevent, uim1_clk, uim1_data, + uim1_present, uim1_reset, usb2phy_ac_en ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + + tlmm: pinctrl@f000000 { + compatible = "qcom,kuno-tlmm"; + reg = <0x0f000000 0x400000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 110>; + interrupt-controller; + #interrupt-cells = <2>; + + spmi-state { + pins = "gpio78", "gpio79"; + function = "spmi_vgi_hwevent"; + }; + }; +... -- cgit v1.2.3 From d0344c6510d050ee79c6aa3997f2c641168ebf08 Mon Sep 17 00:00:00 2001 From: Hardeep Sharma Date: Thu, 27 Aug 2026 23:21:12 +0530 Subject: pinctrl: qcom: Add Kuno pinctrl driver Add the TLMM pinctrl driver for the Qualcomm Kuno platform, supporting 110 GPIOs and their pin multiplexing, pin configuration and gpiolib interface through the common pinctrl-msm driver. Signed-off-by: Hardeep Sharma Reviewed-by: Linus Walleij Reviewed-by: Konrad Dybcio Link: https://patch.msgid.link/20260827-kuno-soc-support-v5-9-6d47636a8f09@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/pinctrl/qcom/Kconfig.msm | 11 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-kuno.c | 801 ++++++++++++++++++++++++++++++++++++ 3 files changed, 813 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-kuno.c diff --git a/drivers/pinctrl/qcom/Kconfig.msm b/drivers/pinctrl/qcom/Kconfig.msm index 42875457b5fc..9b95bf8ecb22 100644 --- a/drivers/pinctrl/qcom/Kconfig.msm +++ b/drivers/pinctrl/qcom/Kconfig.msm @@ -153,6 +153,17 @@ config PINCTRL_KAANAPALI Qualcomm Technologies Inc TLMM block found on the Qualcomm Technologies Inc Kaanapali platform. +config PINCTRL_KUNO + tristate "Qualcomm Kuno pin controller driver" + depends on ARM || COMPILE_TEST + default ARCH_QCOM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc Kuno platform. + Say Y here to compile statically, or M here to compile it as a + module. If unsure, say N. + config PINCTRL_MAILI tristate "Qualcomm Technologies Inc Maili pin controller driver" depends on ARM64 || COMPILE_TEST diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 987a79f9d4c4..a29cbb55316b 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_PINCTRL_IPQ6018) += pinctrl-ipq6018.o obj-$(CONFIG_PINCTRL_IPQ9574) += pinctrl-ipq9574.o obj-$(CONFIG_PINCTRL_IPQ9650) += pinctrl-ipq9650.o obj-$(CONFIG_PINCTRL_KAANAPALI) += pinctrl-kaanapali.o +obj-$(CONFIG_PINCTRL_KUNO) += pinctrl-kuno.o obj-$(CONFIG_PINCTRL_MAILI) += pinctrl-maili.o obj-$(CONFIG_PINCTRL_MSM8226) += pinctrl-msm8226.o obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o diff --git a/drivers/pinctrl/qcom/pinctrl-kuno.c b/drivers/pinctrl/qcom/pinctrl-kuno.c new file mode 100644 index 000000000000..404065df2b9f --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-kuno.c @@ -0,0 +1,801 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include +#include +#include + +#include "pinctrl-msm.h" + +#define REG_BASE 0x100000 +#define REG_SIZE 0x1000 +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .grp = PINCTRL_PINGROUP("gpio" #id, \ + gpio##id##_pins, \ + ARRAY_SIZE(gpio##id##_pins)), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = REG_BASE + REG_SIZE * id, \ + .io_reg = REG_BASE + 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = REG_BASE + 0x8 + REG_SIZE * id, \ + .intr_status_reg = REG_BASE + 0xc + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +static const struct pinctrl_pin_desc kuno_pins[] = { + PINCTRL_PIN(0, "GPIO_0"), + PINCTRL_PIN(1, "GPIO_1"), + PINCTRL_PIN(2, "GPIO_2"), + PINCTRL_PIN(3, "GPIO_3"), + PINCTRL_PIN(4, "GPIO_4"), + PINCTRL_PIN(5, "GPIO_5"), + PINCTRL_PIN(6, "GPIO_6"), + PINCTRL_PIN(7, "GPIO_7"), + PINCTRL_PIN(8, "GPIO_8"), + PINCTRL_PIN(9, "GPIO_9"), + PINCTRL_PIN(10, "GPIO_10"), + PINCTRL_PIN(11, "GPIO_11"), + PINCTRL_PIN(12, "GPIO_12"), + PINCTRL_PIN(13, "GPIO_13"), + PINCTRL_PIN(14, "GPIO_14"), + PINCTRL_PIN(15, "GPIO_15"), + PINCTRL_PIN(16, "GPIO_16"), + PINCTRL_PIN(17, "GPIO_17"), + PINCTRL_PIN(18, "GPIO_18"), + PINCTRL_PIN(19, "GPIO_19"), + PINCTRL_PIN(20, "GPIO_20"), + PINCTRL_PIN(21, "GPIO_21"), + PINCTRL_PIN(22, "GPIO_22"), + PINCTRL_PIN(23, "GPIO_23"), + PINCTRL_PIN(24, "GPIO_24"), + PINCTRL_PIN(25, "GPIO_25"), + PINCTRL_PIN(26, "GPIO_26"), + PINCTRL_PIN(27, "GPIO_27"), + PINCTRL_PIN(28, "GPIO_28"), + PINCTRL_PIN(29, "GPIO_29"), + PINCTRL_PIN(30, "GPIO_30"), + PINCTRL_PIN(31, "GPIO_31"), + PINCTRL_PIN(32, "GPIO_32"), + PINCTRL_PIN(33, "GPIO_33"), + PINCTRL_PIN(34, "GPIO_34"), + PINCTRL_PIN(35, "GPIO_35"), + PINCTRL_PIN(36, "GPIO_36"), + PINCTRL_PIN(37, "GPIO_37"), + PINCTRL_PIN(38, "GPIO_38"), + PINCTRL_PIN(39, "GPIO_39"), + PINCTRL_PIN(40, "GPIO_40"), + PINCTRL_PIN(41, "GPIO_41"), + PINCTRL_PIN(42, "GPIO_42"), + PINCTRL_PIN(43, "GPIO_43"), + PINCTRL_PIN(44, "GPIO_44"), + PINCTRL_PIN(45, "GPIO_45"), + PINCTRL_PIN(46, "GPIO_46"), + PINCTRL_PIN(47, "GPIO_47"), + PINCTRL_PIN(48, "GPIO_48"), + PINCTRL_PIN(49, "GPIO_49"), + PINCTRL_PIN(50, "GPIO_50"), + PINCTRL_PIN(51, "GPIO_51"), + PINCTRL_PIN(52, "GPIO_52"), + PINCTRL_PIN(53, "GPIO_53"), + PINCTRL_PIN(54, "GPIO_54"), + PINCTRL_PIN(55, "GPIO_55"), + PINCTRL_PIN(56, "GPIO_56"), + PINCTRL_PIN(57, "GPIO_57"), + PINCTRL_PIN(58, "GPIO_58"), + PINCTRL_PIN(59, "GPIO_59"), + PINCTRL_PIN(60, "GPIO_60"), + PINCTRL_PIN(61, "GPIO_61"), + PINCTRL_PIN(62, "GPIO_62"), + PINCTRL_PIN(63, "GPIO_63"), + PINCTRL_PIN(64, "GPIO_64"), + PINCTRL_PIN(65, "GPIO_65"), + PINCTRL_PIN(66, "GPIO_66"), + PINCTRL_PIN(67, "GPIO_67"), + PINCTRL_PIN(68, "GPIO_68"), + PINCTRL_PIN(69, "GPIO_69"), + PINCTRL_PIN(70, "GPIO_70"), + PINCTRL_PIN(71, "GPIO_71"), + PINCTRL_PIN(72, "GPIO_72"), + PINCTRL_PIN(73, "GPIO_73"), + PINCTRL_PIN(74, "GPIO_74"), + PINCTRL_PIN(75, "GPIO_75"), + PINCTRL_PIN(76, "GPIO_76"), + PINCTRL_PIN(77, "GPIO_77"), + PINCTRL_PIN(78, "GPIO_78"), + PINCTRL_PIN(79, "GPIO_79"), + PINCTRL_PIN(80, "GPIO_80"), + PINCTRL_PIN(81, "GPIO_81"), + PINCTRL_PIN(82, "GPIO_82"), + PINCTRL_PIN(83, "GPIO_83"), + PINCTRL_PIN(84, "GPIO_84"), + PINCTRL_PIN(85, "GPIO_85"), + PINCTRL_PIN(86, "GPIO_86"), + PINCTRL_PIN(87, "GPIO_87"), + PINCTRL_PIN(88, "GPIO_88"), + PINCTRL_PIN(89, "GPIO_89"), + PINCTRL_PIN(90, "GPIO_90"), + PINCTRL_PIN(91, "GPIO_91"), + PINCTRL_PIN(92, "GPIO_92"), + PINCTRL_PIN(93, "GPIO_93"), + PINCTRL_PIN(94, "GPIO_94"), + PINCTRL_PIN(95, "GPIO_95"), + PINCTRL_PIN(96, "GPIO_96"), + PINCTRL_PIN(97, "GPIO_97"), + PINCTRL_PIN(98, "GPIO_98"), + PINCTRL_PIN(99, "GPIO_99"), + PINCTRL_PIN(100, "GPIO_100"), + PINCTRL_PIN(101, "GPIO_101"), + PINCTRL_PIN(102, "GPIO_102"), + PINCTRL_PIN(103, "GPIO_103"), + PINCTRL_PIN(104, "GPIO_104"), + PINCTRL_PIN(105, "GPIO_105"), + PINCTRL_PIN(106, "GPIO_106"), + PINCTRL_PIN(107, "GPIO_107"), + PINCTRL_PIN(108, "GPIO_108"), + PINCTRL_PIN(109, "GPIO_109"), +}; + +#define DECLARE_MSM_GPIO_PINS(pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS(0); +DECLARE_MSM_GPIO_PINS(1); +DECLARE_MSM_GPIO_PINS(2); +DECLARE_MSM_GPIO_PINS(3); +DECLARE_MSM_GPIO_PINS(4); +DECLARE_MSM_GPIO_PINS(5); +DECLARE_MSM_GPIO_PINS(6); +DECLARE_MSM_GPIO_PINS(7); +DECLARE_MSM_GPIO_PINS(8); +DECLARE_MSM_GPIO_PINS(9); +DECLARE_MSM_GPIO_PINS(10); +DECLARE_MSM_GPIO_PINS(11); +DECLARE_MSM_GPIO_PINS(12); +DECLARE_MSM_GPIO_PINS(13); +DECLARE_MSM_GPIO_PINS(14); +DECLARE_MSM_GPIO_PINS(15); +DECLARE_MSM_GPIO_PINS(16); +DECLARE_MSM_GPIO_PINS(17); +DECLARE_MSM_GPIO_PINS(18); +DECLARE_MSM_GPIO_PINS(19); +DECLARE_MSM_GPIO_PINS(20); +DECLARE_MSM_GPIO_PINS(21); +DECLARE_MSM_GPIO_PINS(22); +DECLARE_MSM_GPIO_PINS(23); +DECLARE_MSM_GPIO_PINS(24); +DECLARE_MSM_GPIO_PINS(25); +DECLARE_MSM_GPIO_PINS(26); +DECLARE_MSM_GPIO_PINS(27); +DECLARE_MSM_GPIO_PINS(28); +DECLARE_MSM_GPIO_PINS(29); +DECLARE_MSM_GPIO_PINS(30); +DECLARE_MSM_GPIO_PINS(31); +DECLARE_MSM_GPIO_PINS(32); +DECLARE_MSM_GPIO_PINS(33); +DECLARE_MSM_GPIO_PINS(34); +DECLARE_MSM_GPIO_PINS(35); +DECLARE_MSM_GPIO_PINS(36); +DECLARE_MSM_GPIO_PINS(37); +DECLARE_MSM_GPIO_PINS(38); +DECLARE_MSM_GPIO_PINS(39); +DECLARE_MSM_GPIO_PINS(40); +DECLARE_MSM_GPIO_PINS(41); +DECLARE_MSM_GPIO_PINS(42); +DECLARE_MSM_GPIO_PINS(43); +DECLARE_MSM_GPIO_PINS(44); +DECLARE_MSM_GPIO_PINS(45); +DECLARE_MSM_GPIO_PINS(46); +DECLARE_MSM_GPIO_PINS(47); +DECLARE_MSM_GPIO_PINS(48); +DECLARE_MSM_GPIO_PINS(49); +DECLARE_MSM_GPIO_PINS(50); +DECLARE_MSM_GPIO_PINS(51); +DECLARE_MSM_GPIO_PINS(52); +DECLARE_MSM_GPIO_PINS(53); +DECLARE_MSM_GPIO_PINS(54); +DECLARE_MSM_GPIO_PINS(55); +DECLARE_MSM_GPIO_PINS(56); +DECLARE_MSM_GPIO_PINS(57); +DECLARE_MSM_GPIO_PINS(58); +DECLARE_MSM_GPIO_PINS(59); +DECLARE_MSM_GPIO_PINS(60); +DECLARE_MSM_GPIO_PINS(61); +DECLARE_MSM_GPIO_PINS(62); +DECLARE_MSM_GPIO_PINS(63); +DECLARE_MSM_GPIO_PINS(64); +DECLARE_MSM_GPIO_PINS(65); +DECLARE_MSM_GPIO_PINS(66); +DECLARE_MSM_GPIO_PINS(67); +DECLARE_MSM_GPIO_PINS(68); +DECLARE_MSM_GPIO_PINS(69); +DECLARE_MSM_GPIO_PINS(70); +DECLARE_MSM_GPIO_PINS(71); +DECLARE_MSM_GPIO_PINS(72); +DECLARE_MSM_GPIO_PINS(73); +DECLARE_MSM_GPIO_PINS(74); +DECLARE_MSM_GPIO_PINS(75); +DECLARE_MSM_GPIO_PINS(76); +DECLARE_MSM_GPIO_PINS(77); +DECLARE_MSM_GPIO_PINS(78); +DECLARE_MSM_GPIO_PINS(79); +DECLARE_MSM_GPIO_PINS(80); +DECLARE_MSM_GPIO_PINS(81); +DECLARE_MSM_GPIO_PINS(82); +DECLARE_MSM_GPIO_PINS(83); +DECLARE_MSM_GPIO_PINS(84); +DECLARE_MSM_GPIO_PINS(85); +DECLARE_MSM_GPIO_PINS(86); +DECLARE_MSM_GPIO_PINS(87); +DECLARE_MSM_GPIO_PINS(88); +DECLARE_MSM_GPIO_PINS(89); +DECLARE_MSM_GPIO_PINS(90); +DECLARE_MSM_GPIO_PINS(91); +DECLARE_MSM_GPIO_PINS(92); +DECLARE_MSM_GPIO_PINS(93); +DECLARE_MSM_GPIO_PINS(94); +DECLARE_MSM_GPIO_PINS(95); +DECLARE_MSM_GPIO_PINS(96); +DECLARE_MSM_GPIO_PINS(97); +DECLARE_MSM_GPIO_PINS(98); +DECLARE_MSM_GPIO_PINS(99); +DECLARE_MSM_GPIO_PINS(100); +DECLARE_MSM_GPIO_PINS(101); +DECLARE_MSM_GPIO_PINS(102); +DECLARE_MSM_GPIO_PINS(103); +DECLARE_MSM_GPIO_PINS(104); +DECLARE_MSM_GPIO_PINS(105); +DECLARE_MSM_GPIO_PINS(106); +DECLARE_MSM_GPIO_PINS(107); +DECLARE_MSM_GPIO_PINS(108); +DECLARE_MSM_GPIO_PINS(109); + +enum kuno_functions { + msm_mux_gpio, + msm_mux_audio_ref_clk, + msm_mux_coex_uart, + msm_mux_ebi2_lcd_a, + msm_mux_ebi2_lcd_cs, + msm_mux_ebi2_lcd_reset, + msm_mux_ebi2_lcd_te, + msm_mux_emac_mdc, + msm_mux_emac_mdio, + msm_mux_emac_pps_in, + msm_mux_emac_ptp_aux, + msm_mux_emac_ptp_pps, + msm_mux_gcc_gp1_clk, + msm_mux_gcc_gp2_clk, + msm_mux_gcc_gp3_clk, + msm_mux_mi2s0_data0, + msm_mux_mi2s0_data1, + msm_mux_mi2s0_sck, + msm_mux_mi2s0_ws, + msm_mux_mi2s1_data0, + msm_mux_mi2s1_data1, + msm_mux_mi2s1_sck, + msm_mux_mi2s1_ws, + msm_mux_mi2s_mclk, + msm_mux_nav_gpio, + msm_mux_pci_e_rst, + msm_mux_pcie_clkreq_n, + msm_mux_pll_bist_sync, + msm_mux_pll_clk_aux, + msm_mux_qdss_cti_trig0, + msm_mux_qdss_cti_trig1, + msm_mux_qdss_cti_trig1_mire, + msm_mux_qdss_gpio_traceclk, + msm_mux_qdss_gpio_tracectl, + msm_mux_qup0_se0, + msm_mux_qup0_se1, + msm_mux_qup0_se2, + msm_mux_qup0_se3_mira, + msm_mux_qup0_se3_mirb, + msm_mux_qup0_se4, + msm_mux_sdc4_clk, + msm_mux_sdc4_cmd, + msm_mux_sdc4_data, + msm_mux_sdc4_tb_trig, + msm_mux_sgmii_phy_intr, + msm_mux_spmi_coex_clk, + msm_mux_spmi_coex_data, + msm_mux_spmi_vgi_hwevent, + msm_mux_uim1_clk, + msm_mux_uim1_data, + msm_mux_uim1_present, + msm_mux_uim1_reset, + msm_mux_usb2phy_ac_en, + msm_mux__, +}; + +static const char * const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49", + "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56", + "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63", + "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70", + "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77", + "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84", + "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91", + "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98", + "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104", + "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", +}; + +static const char * const audio_ref_clk_groups[] = { + "gpio62", +}; + +static const char * const coex_uart_groups[] = { + "gpio44", "gpio45", +}; + +static const char * const ebi2_lcd_a_groups[] = { + "gpio93", +}; + +static const char * const ebi2_lcd_cs_groups[] = { + "gpio94", +}; + +static const char * const ebi2_lcd_reset_groups[] = { + "gpio89", +}; + +static const char * const ebi2_lcd_te_groups[] = { + "gpio88", +}; + +static const char * const emac_mdc_groups[] = { + "gpio98", +}; + +static const char * const emac_mdio_groups[] = { + "gpio99", +}; + +static const char * const emac_pps_in_groups[] = { + "gpio88", +}; + +static const char * const emac_ptp_aux_groups[] = { + "gpio93", "gpio94", +}; + +static const char * const emac_ptp_pps_groups[] = { + "gpio93", "gpio94", +}; + +static const char * const gcc_gp1_clk_groups[] = { + "gpio34", +}; + +static const char * const gcc_gp2_clk_groups[] = { + "gpio46", +}; + +static const char * const gcc_gp3_clk_groups[] = { + "gpio35", +}; + +static const char * const mi2s0_data0_groups[] = { + "gpio13", +}; + +static const char * const mi2s0_data1_groups[] = { + "gpio14", +}; + +static const char * const mi2s0_sck_groups[] = { + "gpio15", +}; + +static const char * const mi2s0_ws_groups[] = { + "gpio12", +}; + +static const char * const mi2s1_data0_groups[] = { + "gpio17", +}; + +static const char * const mi2s1_data1_groups[] = { + "gpio18", +}; + +static const char * const mi2s1_sck_groups[] = { + "gpio19", +}; + +static const char * const mi2s1_ws_groups[] = { + "gpio16", +}; + +static const char * const mi2s_mclk_groups[] = { + "gpio62", +}; + +static const char * const nav_gpio_groups[] = { + "gpio31", "gpio32", "gpio33", +}; + +static const char * const pci_e_rst_groups[] = { + "gpio57", +}; + +static const char * const pcie_clkreq_n_groups[] = { + "gpio56", +}; + +static const char * const pll_bist_sync_groups[] = { + "gpio47", +}; + +static const char * const pll_clk_aux_groups[] = { + "gpio54", +}; + +static const char * const qdss_cti_trig0_groups[] = { + "gpio16", "gpio17", "gpio54", "gpio55", "gpio60", "gpio84", "gpio101", + "gpio102", +}; + +static const char * const qdss_cti_trig1_groups[] = { + "gpio16", "gpio17", "gpio54", "gpio55", "gpio65", "gpio66", "gpio101", + "gpio102", +}; +static const char * const qdss_cti_trig1_mire_groups[] = { + "gpio65", "gpio66", +}; + +static const char * const qdss_gpio_traceclk_groups[] = { + "gpio8", +}; + +static const char * const qdss_gpio_tracectl_groups[] = { + "gpio9", +}; + +static const char * const qup0_se0_groups[] = { + "gpio14", "gpio18", "gpio19", "gpio48", "gpio49", "gpio92", "gpio101", +}; + +static const char * const qup0_se1_groups[] = { + "gpio14", "gpio63", "gpio64", "gpio65", "gpio66", "gpio92", "gpio101", +}; + +static const char * const qup0_se2_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", "gpio14", "gpio92", "gpio101", +}; + +static const char * const qup0_se3_mira_groups[] = { + "gpio8", "gpio9", "gpio14", "gpio16", "gpio17", "gpio92", "gpio101", +}; + +static const char * const qup0_se3_mirb_groups[] = { + "gpio12", "gpio13", "gpio14", "gpio15", +}; + +static const char * const qup0_se4_groups[] = { + "gpio10", "gpio11", "gpio14", "gpio80", "gpio81", "gpio92", "gpio101", +}; + +static const char * const sdc4_clk_groups[] = { + "gpio103", +}; + +static const char * const sdc4_cmd_groups[] = { + "gpio102", +}; + +static const char * const sdc4_data_groups[] = { + "gpio104", "gpio105", "gpio106", "gpio107", +}; + +static const char * const sdc4_tb_trig_groups[] = { + "gpio101", +}; + +static const char * const sgmii_phy_intr_groups[] = { + "gpio91", +}; + +static const char * const spmi_coex_clk_groups[] = { + "gpio76", +}; + +static const char * const spmi_coex_data_groups[] = { + "gpio75", +}; + +static const char * const spmi_vgi_hwevent_groups[] = { + "gpio78", "gpio79", +}; + +static const char * const uim1_clk_groups[] = { + "gpio3", +}; + +static const char * const uim1_data_groups[] = { + "gpio0", +}; + +static const char * const uim1_present_groups[] = { + "gpio1", +}; + +static const char * const uim1_reset_groups[] = { + "gpio2", +}; + +static const char * const usb2phy_ac_en_groups[] = { + "gpio90", +}; + +static const struct pinfunction kuno_functions[] = { + MSM_GPIO_PIN_FUNCTION(gpio), + MSM_PIN_FUNCTION(audio_ref_clk), + MSM_PIN_FUNCTION(coex_uart), + MSM_PIN_FUNCTION(ebi2_lcd_a), + MSM_PIN_FUNCTION(ebi2_lcd_cs), + MSM_PIN_FUNCTION(ebi2_lcd_reset), + MSM_PIN_FUNCTION(ebi2_lcd_te), + MSM_PIN_FUNCTION(emac_mdc), + MSM_PIN_FUNCTION(emac_mdio), + MSM_PIN_FUNCTION(emac_pps_in), + MSM_PIN_FUNCTION(emac_ptp_aux), + MSM_PIN_FUNCTION(emac_ptp_pps), + MSM_PIN_FUNCTION(gcc_gp1_clk), + MSM_PIN_FUNCTION(gcc_gp2_clk), + MSM_PIN_FUNCTION(gcc_gp3_clk), + MSM_PIN_FUNCTION(mi2s0_data0), + MSM_PIN_FUNCTION(mi2s0_data1), + MSM_PIN_FUNCTION(mi2s0_sck), + MSM_PIN_FUNCTION(mi2s0_ws), + MSM_PIN_FUNCTION(mi2s1_data0), + MSM_PIN_FUNCTION(mi2s1_data1), + MSM_PIN_FUNCTION(mi2s1_sck), + MSM_PIN_FUNCTION(mi2s1_ws), + MSM_PIN_FUNCTION(mi2s_mclk), + MSM_PIN_FUNCTION(nav_gpio), + MSM_PIN_FUNCTION(pci_e_rst), + MSM_PIN_FUNCTION(pcie_clkreq_n), + MSM_PIN_FUNCTION(pll_bist_sync), + MSM_PIN_FUNCTION(pll_clk_aux), + MSM_PIN_FUNCTION(qdss_cti_trig0), + MSM_PIN_FUNCTION(qdss_cti_trig1), + MSM_PIN_FUNCTION(qdss_cti_trig1_mire), + MSM_PIN_FUNCTION(qdss_gpio_traceclk), + MSM_PIN_FUNCTION(qdss_gpio_tracectl), + MSM_PIN_FUNCTION(qup0_se0), + MSM_PIN_FUNCTION(qup0_se1), + MSM_PIN_FUNCTION(qup0_se2), + MSM_PIN_FUNCTION(qup0_se3_mira), + MSM_PIN_FUNCTION(qup0_se3_mirb), + MSM_PIN_FUNCTION(qup0_se4), + MSM_PIN_FUNCTION(sdc4_clk), + MSM_PIN_FUNCTION(sdc4_cmd), + MSM_PIN_FUNCTION(sdc4_data), + MSM_PIN_FUNCTION(sdc4_tb_trig), + MSM_PIN_FUNCTION(sgmii_phy_intr), + MSM_PIN_FUNCTION(spmi_coex_clk), + MSM_PIN_FUNCTION(spmi_coex_data), + MSM_PIN_FUNCTION(spmi_vgi_hwevent), + MSM_PIN_FUNCTION(uim1_clk), + MSM_PIN_FUNCTION(uim1_data), + MSM_PIN_FUNCTION(uim1_present), + MSM_PIN_FUNCTION(uim1_reset), + MSM_PIN_FUNCTION(usb2phy_ac_en), +}; + +/* Every pin is maintained as a single group, and missing or non-existing pin + * would be maintained as dummy group to synchronize pin group index with + * pin descriptor registered with pinctrl core. + * Clients would not be able to request these dummy pin groups. + */ +static const struct msm_pingroup kuno_groups[] = { + [0] = PINGROUP(0, uim1_data, _, _, _, _, _, _, _, _), + [1] = PINGROUP(1, uim1_present, _, _, _, _, _, _, _, _), + [2] = PINGROUP(2, uim1_reset, _, _, _, _, _, _, _, _), + [3] = PINGROUP(3, uim1_clk, _, _, _, _, _, _, _, _), + [4] = PINGROUP(4, qup0_se2, _, _, _, _, _, _, _, _), + [5] = PINGROUP(5, qup0_se2, _, _, _, _, _, _, _, _), + [6] = PINGROUP(6, qup0_se2, _, _, _, _, _, _, _, _), + [7] = PINGROUP(7, qup0_se2, _, _, _, _, _, _, _, _), + [8] = PINGROUP(8, qup0_se3_mira, _, qdss_gpio_traceclk, _, _, _, _, _, _), + [9] = PINGROUP(9, qup0_se3_mira, _, qdss_gpio_tracectl, _, _, _, _, _, _), + [10] = PINGROUP(10, qup0_se4, _, _, _, _, _, _, _, _), + [11] = PINGROUP(11, qup0_se4, _, _, _, _, _, _, _, _), + [12] = PINGROUP(12, mi2s0_ws, qup0_se3_mirb, _, _, _, _, _, _, _), + [13] = PINGROUP(13, mi2s0_data0, qup0_se3_mirb, _, _, _, _, _, _, _), + [14] = PINGROUP(14, mi2s0_data1, qup0_se3_mirb, qup0_se0, qup0_se1, qup0_se2, + qup0_se3_mira, qup0_se4, _, _), + [15] = PINGROUP(15, mi2s0_sck, qup0_se3_mirb, _, _, _, _, _, _, _), + [16] = PINGROUP(16, mi2s1_ws, qup0_se3_mira, qdss_cti_trig1, qdss_cti_trig0, + _, _, _, _, _), + [17] = PINGROUP(17, mi2s1_data0, qup0_se3_mira, qdss_cti_trig1, qdss_cti_trig0, + _, _, _, _, _), + [18] = PINGROUP(18, mi2s1_data1, qup0_se0, _, _, _, _, _, _, _), + [19] = PINGROUP(19, mi2s1_sck, qup0_se0, _, _, _, _, _, _, _), + [20] = PINGROUP(20, _, _, _, _, _, _, _, _, _), + [21] = PINGROUP(21, _, _, _, _, _, _, _, _, _), + [22] = PINGROUP(22, _, _, _, _, _, _, _, _, _), + [23] = PINGROUP(23, _, _, _, _, _, _, _, _, _), + [24] = PINGROUP(24, _, _, _, _, _, _, _, _, _), + [25] = PINGROUP(25, _, _, _, _, _, _, _, _, _), + [26] = PINGROUP(26, _, _, _, _, _, _, _, _, _), + [27] = PINGROUP(27, _, _, _, _, _, _, _, _, _), + [28] = PINGROUP(28, _, _, _, _, _, _, _, _, _), + [29] = PINGROUP(29, _, _, _, _, _, _, _, _, _), + [30] = PINGROUP(30, _, _, _, _, _, _, _, _, _), + [31] = PINGROUP(31, nav_gpio, _, _, _, _, _, _, _, _), + [32] = PINGROUP(32, nav_gpio, _, _, _, _, _, _, _, _), + [33] = PINGROUP(33, nav_gpio, _, _, _, _, _, _, _, _), + [34] = PINGROUP(34, _, gcc_gp1_clk, _, _, _, _, _, _, _), + [35] = PINGROUP(35, _, _, gcc_gp3_clk, _, _, _, _, _, _), + [36] = PINGROUP(36, _, _, _, _, _, _, _, _, _), + [37] = PINGROUP(37, _, _, _, _, _, _, _, _, _), + [38] = PINGROUP(38, _, _, _, _, _, _, _, _, _), + [39] = PINGROUP(39, _, _, _, _, _, _, _, _, _), + [40] = PINGROUP(40, _, _, _, _, _, _, _, _, _), + [41] = PINGROUP(41, _, _, _, _, _, _, _, _, _), + [42] = PINGROUP(42, _, _, _, _, _, _, _, _, _), + [43] = PINGROUP(43, _, _, _, _, _, _, _, _, _), + [44] = PINGROUP(44, coex_uart, _, _, _, _, _, _, _, _), + [45] = PINGROUP(45, coex_uart, _, _, _, _, _, _, _, _), + [46] = PINGROUP(46, _, _, _, gcc_gp2_clk, _, _, _, _, _), + [47] = PINGROUP(47, _, pll_bist_sync, _, _, _, _, _, _, _), + [48] = PINGROUP(48, qup0_se0, _, _, _, _, _, _, _, _), + [49] = PINGROUP(49, qup0_se0, _, _, _, _, _, _, _, _), + [50] = PINGROUP(50, _, _, _, _, _, _, _, _, _), + [51] = PINGROUP(51, _, _, _, _, _, _, _, _, _), + [52] = PINGROUP(52, _, _, _, _, _, _, _, _, _), + [53] = PINGROUP(53, _, _, _, _, _, _, _, _, _), + [54] = PINGROUP(54, qdss_cti_trig1, qdss_cti_trig0, pll_clk_aux, _, _, _, _, _, _), + [55] = PINGROUP(55, qdss_cti_trig1, qdss_cti_trig0, _, _, _, _, _, _, _), + [56] = PINGROUP(56, pcie_clkreq_n, _, _, _, _, _, _, _, _), + [57] = PINGROUP(57, pci_e_rst, _, _, _, _, _, _, _, _), + [58] = PINGROUP(58, _, _, _, _, _, _, _, _, _), + [59] = PINGROUP(59, _, _, _, _, _, _, _, _, _), + [60] = PINGROUP(60, qdss_cti_trig0, _, _, _, _, _, _, _, _), + [61] = PINGROUP(61, _, _, _, _, _, _, _, _, _), + [62] = PINGROUP(62, mi2s_mclk, audio_ref_clk, _, _, _, _, _, _, _), + [63] = PINGROUP(63, qup0_se1, _, _, _, _, _, _, _, _), + [64] = PINGROUP(64, qup0_se1, _, _, _, _, _, _, _, _), + [65] = PINGROUP(65, qup0_se1, qdss_cti_trig1, qdss_cti_trig1_mire, _, _, _, _, _, _), + [66] = PINGROUP(66, qup0_se1, qdss_cti_trig1, qdss_cti_trig1_mire, _, _, _, _, _, _), + [67] = PINGROUP(67, _, _, _, _, _, _, _, _, _), + [68] = PINGROUP(68, _, _, _, _, _, _, _, _, _), + [69] = PINGROUP(69, _, _, _, _, _, _, _, _, _), + [70] = PINGROUP(70, _, _, _, _, _, _, _, _, _), + [71] = PINGROUP(71, _, _, _, _, _, _, _, _, _), + [72] = PINGROUP(72, _, _, _, _, _, _, _, _, _), + [73] = PINGROUP(73, _, _, _, _, _, _, _, _, _), + [74] = PINGROUP(74, _, _, _, _, _, _, _, _, _), + [75] = PINGROUP(75, spmi_coex_data, _, _, _, _, _, _, _, _), + [76] = PINGROUP(76, spmi_coex_clk, _, _, _, _, _, _, _, _), + [77] = PINGROUP(77, _, _, _, _, _, _, _, _, _), + [78] = PINGROUP(78, spmi_vgi_hwevent, _, _, _, _, _, _, _, _), + [79] = PINGROUP(79, spmi_vgi_hwevent, _, _, _, _, _, _, _, _), + [80] = PINGROUP(80, qup0_se4, _, _, _, _, _, _, _, _), + [81] = PINGROUP(81, qup0_se4, _, _, _, _, _, _, _, _), + [82] = PINGROUP(82, _, _, _, _, _, _, _, _, _), + [83] = PINGROUP(83, _, _, _, _, _, _, _, _, _), + [84] = PINGROUP(84, qdss_cti_trig0, _, _, _, _, _, _, _, _), + [85] = PINGROUP(85, _, _, _, _, _, _, _, _, _), + [86] = PINGROUP(86, _, _, _, _, _, _, _, _, _), + [87] = PINGROUP(87, _, _, _, _, _, _, _, _, _), + [88] = PINGROUP(88, ebi2_lcd_te, emac_pps_in, _, _, _, _, _, _, _), + [89] = PINGROUP(89, ebi2_lcd_reset, _, _, _, _, _, _, _, _), + [90] = PINGROUP(90, usb2phy_ac_en, _, _, _, _, _, _, _, _), + [91] = PINGROUP(91, sgmii_phy_intr, _, _, _, _, _, _, _, _), + [92] = PINGROUP(92, qup0_se0, qup0_se1, qup0_se2, qup0_se3_mira, qup0_se4, _, _, _, _), + [93] = PINGROUP(93, ebi2_lcd_a, emac_ptp_pps, emac_ptp_aux, _, _, _, _, _, _), + [94] = PINGROUP(94, ebi2_lcd_cs, emac_ptp_pps, emac_ptp_aux, _, _, _, _, _, _), + [95] = PINGROUP(95, _, _, _, _, _, _, _, _, _), + [96] = PINGROUP(96, _, _, _, _, _, _, _, _, _), + [97] = PINGROUP(97, _, _, _, _, _, _, _, _, _), + [98] = PINGROUP(98, emac_mdc, _, _, _, _, _, _, _, _), + [99] = PINGROUP(99, emac_mdio, _, _, _, _, _, _, _, _), + [100] = PINGROUP(100, _, _, _, _, _, _, _, _, _), + [101] = PINGROUP(101, sdc4_tb_trig, qdss_cti_trig1, qdss_cti_trig0, qup0_se0, + qup0_se1, qup0_se2, qup0_se3_mira, qup0_se4, _), + [102] = PINGROUP(102, sdc4_cmd, qdss_cti_trig1, qdss_cti_trig0, _, _, _, _, _, _), + [103] = PINGROUP(103, sdc4_clk, _, _, _, _, _, _, _, _), + [104] = PINGROUP(104, sdc4_data, _, _, _, _, _, _, _, _), + [105] = PINGROUP(105, sdc4_data, _, _, _, _, _, _, _, _), + [106] = PINGROUP(106, sdc4_data, _, _, _, _, _, _, _, _), + [107] = PINGROUP(107, sdc4_data, _, _, _, _, _, _, _, _), + [108] = PINGROUP(108, _, _, _, _, _, _, _, _, _), + [109] = PINGROUP(109, _, _, _, _, _, _, _, _, _), +}; + +static const struct msm_gpio_wakeirq_map kuno_pdc_map[] = { + { 1, 62 }, { 2, 83 }, { 4, 59 }, { 5, 107 }, { 6, 112 }, { 7, 119 }, + { 8, 123 }, { 10, 52 }, { 11, 73 }, { 12, 74 }, { 13, 75 }, { 14, 76 }, + { 15, 77 }, { 16, 81 }, { 17, 82 }, { 18, 80 }, { 19, 100 }, { 21, 88 }, + { 22, 99 }, { 23, 84 }, { 24, 85 }, { 25, 97 }, { 26, 86 }, { 27, 102 }, + { 28, 87 }, { 35, 103 }, { 43, 90 }, { 44, 60 }, { 45, 61 }, { 46, 104 }, + { 47, 89 }, { 48, 105 }, { 49, 106 }, { 50, 101 }, { 52, 109 }, { 53, 79 }, + { 54, 110 }, { 55, 111 }, { 56, 78 }, { 57, 71 }, { 60, 113 }, { 61, 114 }, + { 63, 115 }, { 64, 116 }, { 65, 57 }, { 66, 117 }, { 68, 64 }, { 69, 118 }, + { 71, 108 }, { 73, 120 }, { 74, 121 }, { 76, 47 }, { 77, 122 }, { 78, 65 }, + { 79, 66 }, { 80, 124 }, { 81, 125 }, { 82, 126 }, { 83, 127 }, { 84, 93 }, + { 85, 128 }, { 86, 129 }, { 87, 70 }, { 88, 130 }, { 96, 68 }, { 98, 50 }, + { 99, 67 }, { 100, 51 }, { 101, 53 }, { 102, 54 }, { 103, 98 }, { 104, 91 }, + { 105, 69 }, { 106, 55 }, { 107, 56 }, { 109, 72 }, +}; + +static const struct msm_pinctrl_soc_data kuno_tlmm = { + .pins = kuno_pins, + .npins = ARRAY_SIZE(kuno_pins), + .functions = kuno_functions, + .nfunctions = ARRAY_SIZE(kuno_functions), + .groups = kuno_groups, + .ngroups = ARRAY_SIZE(kuno_groups), + .ngpios = 110, + .wakeirq_map = kuno_pdc_map, + .nwakeirq_map = ARRAY_SIZE(kuno_pdc_map), +}; + +static int kuno_tlmm_probe(struct platform_device *pdev) +{ + return msm_pinctrl_probe(pdev, &kuno_tlmm); +} + +static const struct of_device_id kuno_tlmm_of_match[] = { + { .compatible = "qcom,kuno-tlmm", }, + { }, +}; +MODULE_DEVICE_TABLE(of, kuno_tlmm_of_match); + +static struct platform_driver kuno_tlmm_driver = { + .driver = { + .name = "kuno-tlmm", + .of_match_table = kuno_tlmm_of_match, + }, + .probe = kuno_tlmm_probe, +}; + +static int __init kuno_tlmm_init(void) +{ + return platform_driver_register(&kuno_tlmm_driver); +} +arch_initcall(kuno_tlmm_init); + +static void __exit kuno_tlmm_exit(void) +{ + platform_driver_unregister(&kuno_tlmm_driver); +} +module_exit(kuno_tlmm_exit); + +MODULE_DESCRIPTION("QTI Kuno TLMM driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From d4f74023be11eb9aea9a8c0b0582f20aa2c2640b Mon Sep 17 00:00:00 2001 From: Xilin Wu Date: Tue, 1 Sep 2026 16:47:58 +0800 Subject: dt-bindings: pinctrl: qcom,sc8280xp-tlmm: allow gpio-line-names The SC8280XP TLMM GPIO controller exposes 230 GPIO lines. Allow boards to provide descriptive names for these lines and constrain the list to the number of GPIOs exposed by the controller. Reviewed-by: Konrad Dybcio Acked-by: Krzysztof Kozlowski Signed-off-by: Xilin Wu Link: https://patch.msgid.link/20260901-q8b-dts-v1-5-7de0b6a73d08@radxa.com Signed-off-by: Bartosz Golaszewski --- Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml index ed344deaf8b9..ebc3a8b34a4c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml @@ -27,6 +27,9 @@ properties: gpio-reserved-ranges: true + gpio-line-names: + maxItems: 230 + patternProperties: "-state$": oneOf: -- cgit v1.2.3