kernel/git/stable/linux-stable.git/drivers/s390, branch master

Merge tag 'net-7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2026-09-10T21:07:48+00:00

Pull networking fixes from Jakub Kicinski: "Nothing too exciting, usual stream of fixes. Including fixes from Netfilter, Bluetooth and WPAN. Current release - new code bugs: - Bluetooth: hci_sync: fix not setting CE length properly - eth: enic: match mailbox replies to request numbers Previous releases - regressions: - tunnels: drop stale dst when building an ICMP error for PMTUD - ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings() (bug in the rtnl_lock -> RCU conversion) - eth: bnxt_en: - fix crashes on Thor2 due to OOB coalescing buffer accesses - prevent queue stop with deferred completions Previous releases - always broken: - eth: - ice: don't dereference pointers from TP_printk() - fix OOB writes on ethtool flow rule dump in 3 drivers - mlx5: fix FEC configuration with RS_544_514_INTERLEAVED_QUAD - dsa: tag_brcm: legacy FCS: request needed tailroom Misc: - net: cap tx_queue_len at S16_MAX to prevent oversized ring alloc - ipv6: flowlabel: cap duplicate leases per socket" * tag 'net-7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (164 commits) selftests: tc-testing: test action batch failure cleanup net/sched: act_api: release all action references on NEWACTION failure openvswitch: fix wrong flag value in get_ipv6_ext_hdrs() ipmr: account multicast table and route memory net: phy: dp83td510: handle the active-high LED polarity mode net: macb: initialize PTP state before registering clock net: hsr: enable promiscuous mode on interlink port with fwd offload ipv6: fix fib6 walker UAF on seq stop net: stmmac: fix TX descriptor availability check for TSO traffic net/rds: fix tcp stream corruption with large pages net: mana: restore the XDP program pointer when pre-allocation fails net: phy: dp83867: handle the active-high LED polarity mode octeontx2-af: fix PF/CGX debugfs PCI bus lookup net: net_failover: Fix the deadlock in net_failover_slave_name_change() net: phy: mediatek-ge: disable EEE on the MT7530 PHY tcp: reject non zerocopy devmem tx net: ethernet: mtk_eth_soc: populate lpi_interfaces to fix EEE support net: dsa: mt7530: populate lpi_interfaces to fix EEE support net: hinic: fix mailbox segment buffer overflow net: sun4i-emac: fix missing of_node_put() for phy_node ...

s390/qeth: allow bridgeport queries despite OS_MISMATCH

2026-09-07T23:39:26+00:00

When HiperSockets interfaces on the same VCHID span different OS families, reads of the sysfs attributes bridge_role and bridge_state fail with -EPERM if bridge port ownership belongs to another OS family. As a result, userspace tools such as 'lszdev -ii' cannot retrieve bridge_role and bridge_state, even though firmware returns valid bridge port data for QUERY_BRIDGE_PORTS requests. The firmware reports IPA_RC_SBP_IQD_OS_MISMATCH (0x0010) to indicate that bridge port ownership belongs to a different OS family. For QUERY_BRIDGE_PORTS operations, firmware still returns valid bridge port data (role=none, state=inactive) together with a primary return code of 0x0000 (success). Allow QUERY_BRIDGE_PORTS requests to return the bridge port data provided by the firmware despite OS_MISMATCH. To make the OS family mismatch visible to userspace, represent the firmware-reported role "none" as "none (OS family mismatch)" while preserving the reported bridge_state. The behavior for non-QUERY bridge port commands is unchanged; SET operations continue to return -EPERM when another OS family owns the bridge port. This restores readability of bridge_role and bridge_state. Fixes: 1b05cf6285c1 ("qeth: Include error message for "OS Mismatch"") Cc: stable@vger.kernel.org Suggested-by: Halil Pasic Reviewed-by: Alexandra Winter Signed-off-by: Nagamani PV Link: https://patch.msgid.link/20260901155344.3561483-1-nagamani@linux.ibm.com Signed-off-by: Jakub Kicinski

treewide: refresh kmalloc_obj() conversions

2026-09-05T04:37:00+00:00

This is another run of the Coccinelle script for converting kmalloc() family of allocations to kmalloc_obj() via the existing rules in scripts/coccinelle/api/kmalloc_objs.cocci This catches both the set of kmalloc() uses added since the first kmalloc_obj() conversions in v7.0 and adds a large group missed in the first pass due to Coccinelle not interacting well with the cleanup.h scoped_...() family of macros[1]. I worked around this with spatch's "--macro-file" argument to a file with all the scoped_...() macros mapped to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control flow indicator I could find. Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc, riscv, and s390 with no new warnings. Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1] Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2] Signed-off-by: Kees Cook

s390/ism: folio_put() after error

2026-09-04T23:12:36+00:00

dmb->cpu_addr was allocated via folio_alloc(). Use folio_put() instead of kfree() in the error exit of ism_alloc_dmb() to avoid slab allocator corruption. While at it, reset dmb->cpu_addr after folio_put to avoid unintentional UAF by future callers. Fixes: 83781384a96b ("s390/ism: Properly fix receive message buffer allocation") Signed-off-by: Alexandra Winter Reviewed-by: Gerd Bayer Link: https://patch.msgid.link/20260902143733.433574-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski

Merge tag 's390-7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2026-09-03T17:28:27+00:00

Pull s390 fixes from Heiko Carstens: - Use jiffies instead of jiffies_64 to address a data-race reported by KCSAN - Unpoison cpacf instruction results to address KMSAN reports - Drop unused member from ap_device_id - Fix potential NULL pointer dereferences in IPL code - Add missing length check to SCLP error report handling - Add missing length check to zcrypt CCA code - Fix return code handling in diag324 code - Handle multiple PMU stop callback invocations in perf pai code correctly - Reduce excessive debug feature size in perf pai code from 32 MiB to 4KiB - Switch to common CPU capacity code in topology code to get rid of few lines of code - Address various bugs in corner cases in boot code - Simplify/Rework crst_table_upgrade() to address a potential NULL pointer dereference in case of an allocation failure - Initialize padding bytes in CRT key structure in zcrypt code * tag 's390-7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: Fix uninitialized padding in CRT key structure s390/mm: Simplify crst_table_upgrade() s390/boot: Bound command line facility ranges s390/boot: Avoid IPL parameter append past command line s390/boot: Fix physical memory search range s390/topology: Switch to common cpu capacity code s390/pai: Reduce excessive debug feature size s390/pai: Handle multiple PMU stop callback invocations s390/diag324: Preserve -EBUSY return code s390/zcrypt: Validate length in reply before using it s390/pci: Fix leak of uninitialized kernel data in SCLP report s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block s390/ipl: Fix NULL deref in kdump without re-IPL parm block s390/ap: Drop unused member from ap_device_id s390/cpacf: Unpoison instruction results s390/time: Use jiffies instead of jiffies_64

s390/ctcm: Prevent XID null dereference

2026-09-01T23:55:04+00:00

The mpc_validate_xid() function sets grp->saved_xid2->xid2_flag2 to 0x40 to signal XID validation error. If peer XID is NULL or r/w channel pairing mismatch happens, grp->saved_xid2 is never initialized. An attempt to set the flag in such case leads to NULL dereference. Fix this by using the always available priv->xid->xid2_flag2 instead of grp->saved_xid2->xid2_flag2 for validation errors. Fixes: 293d984f0e36 ("ctcm: infrastructure for replaced ctc driver") Cc: stable@vger.kernel.org Signed-off-by: Aswin Karuvally Link: https://patch.msgid.link/20260827063408.2168914-1-aswin@linux.ibm.com Signed-off-by: Jakub Kicinski

s390/zcrypt: Fix uninitialized padding in CRT key structure

2026-09-01T10:44:48+00:00

The zcrypt_type6_crt_key() function leaves padding bytes uninitialized between key components and the modulus in the CCA CRT key token. These padding bytes are sent to the crypto card, potentially leaking kernel memory contents. The initial memset() only zeros fixed structure fields, not the flexible array member key_parts[] where the padding resides. While key components are properly copied from userspace, the calculated pad_len bytes between them remain uninitialized. Fix by explicitly zeroing the padding bytes after copying the CRT key components. Signed-off-by: Harald Freudenberger Reviewed-by: Finn Callies Signed-off-by: Vasily Gorbik Signed-off-by: Heiko Carstens

s390/zcrypt: Validate length in reply before using it

2026-08-31T14:25:38+00:00

The length information in the reply is used to copy the key token to the target buffer. An invalid information in t->len of the reply may cause an over-read of the target buffer and also a over-write of the target buffer. To prevent that, check t->len before using it. As the available space in destination and source buffer is always larger than the valid length value in the parameter block in the reply, compare t->len with this (already validated) length information. As a side effect, this check also prevents buffer over-read and over-write. Reviewed-by: Harald Freudenberger Signed-off-by: Holger Dengler Signed-off-by: Vasily Gorbik Signed-off-by: Heiko Carstens

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2026-08-25T18:48:04+00:00

Pull kvm updates from Paolo Bonzini: "ARM64: - Add support for 'slot' based PMU events, paired with new UAPI that compels the user to select a specific PMU implementation - Lazy save/restore of vCPU state for pKVM, along with various fixes and cleanups to the management of vCPU state between the untrusted host and pKVM hypervisor - Disable traps of EL1 registers for nested hypervisors when FEAT_NV2p1 is present, guaranteeing that EL2-specific register bits are stateful in the EL1 counterpart - Leverage FEAT_NV3 to avoid unnecessary ERET/TLBI traps when the scope of those instructions remains 'in host' (i.e. L1 kernel/userspace) - Pile of fixes for the management of the VNCR pseudo-TLB, such as under-invalidations and races with concurrent TLBIs on other vCPUs - Consolidate the non-protected and pKVM view of ICH_VTR_EL2 to a runtime-patched constant, allowing the same data to be shared with pKVM prior to dropping host privileges - Considerable pile of LLM-assisted fixes around the shop but mostly in the VGIC, our in-kernel generator of bugs (and sometimes interrupts) LoongArch: - Advertise already-supported capabilities - Some bug fixes about timer and MMIO - Some hardening about interrupt injection - Replace kvm_err() with kvm_pr_unimpl() - Add FPU/LSX/LASX test cases for selftests RISC-V: - Svadu/Zicfiss/Zicfilp FWFT support for Guest - Use try_cmpxchg for IMSIC MRIF RMW - More arch-specific tracepoints in KVM RISC-V - Eager page splitting when enabling dirty logging - Optimize hfence request handling for SMP Guests - Improve dirty log clearing by skipping zero bits in mask - Guard HFENCE range loops against overflow - CPU PM notifiers in KVM RISC-V for non-retentive idle states - Fix kernel-mode vector context save/restore for Guest s390: - Fixes for vfio-ap - Fixes for the gmap rework - Fixes for vsie - AI triggered fixes all over - diag9c tracing - code move preparation for the additional arm64 support - enable CONTEXT_ANALYSIS x86: - Perform spring cleaning on x86.{c,h} and asm/kvm_host.h, by adding regs.c (the kvm_cache_regs.h => regs.h is already applied) and msrs.{c,h}, and moving relevant code out of x86.c - Split kvm_mmu in three parts, respectively to describe the format of page tables, walking the guest page tables and building the page tables. Always use the same page table walker kvm->arch.gva_walk as the entry point to convert a guest's virtual address, where the previous code used two different kvm_mmu structs depending on whether the walk included nested EPT/NPT or not. Make page fault vmexits reuse the permission checking machinery that is used for guest page faults. This is both a cleanup and a baby step towards supporting XS/XU memory permissions - Document some of the "fun" gotchas with the APIC base when creating IRQCHIPs on x86 - Remove a defunct masterclock update from kvm_xen_shared_info_init(). It could result in incorrect kvmclock due to triggering an unnecessary switch to/from masterclock mode - Skip Xen runstate time updates if time has effectively gone backwards, so that the guest doesn't report 100% steal time for a very, very long time - Drop KVM's runtime updates of the Xen PV timing CPUID leaf, as KVM was updating the wrong sub-leaf, and upstream KVM will soon provide all the information needed by userspace to populate the CPUID field itself - Fix a bug where KVM would walk a newly created rmap without holding the rmap lock (or mmu_lock) during aging - Fix a bug where aging TDP MMU SPTEs could clobber FROZEN SPTEs - Fix a variety of #DB priority bugs - Fix a class of races related to enabling Hyper-V emulation on a vCPU after the vCPU is visible to the rest of KVM - Use static calls for nested virtualization ops - Move more KVM-internal code out of x86's kvm_host.h - Enumerate support for a variety of Zhaoxin instructions that don't require explicit virtualization - Fix missing EFER validation bugs, including in the KVM_SET_SREGS* path - Harden kvm_vcpu_map() against double-mapping and thus leaking references - Misc fixes and cleanups, e.g. for largely benign syzkaller splats x86 (Intel): - Zero a vCPU's entry in VMX's Posted Interrupt Descriptor table used for IPI virtualization when the vCPU is freed, to fix a use-after-free where hardware will write to a freed vCPU's PID - Service local TLB flushes on a failed nested VM-Enter to fix a bug where KVM could miss a TLB on a future, successful VM-Enter with the same L2 VPID - Cap the maximum value shoved into the VMX Preemption Timer to workaround an erratum that affects all existing Intel CPUs that support CPUID 0x15 - Fix VPID virtualization bugs where KVM would fail to flush hardware TLBs - Harden the TDX "populate" ioctls against bad input, and to prepare for supporting in-place private<=>shared conversion x86 (AMD): - Forcefully invalidate SNP VMSA pages if their backing guest_memfd page is zapped/invalidated, e.g. due to a PUNCH_HOLE in response to a Page-State Change request - Remove a dying VM from the GA Log notifier list before the VM is actually destroyed, to fix a potential use-after-free - While FOLL_WRITE was needed in the past to trigger CoW unsharing, nowadays FOLL_LONGTERM does that already even without FOLL_WRITE, and in fact, get_user_pages() actually disallows FOLL_WRITE together with FOLL_LONGTERM. So don't pass FOLL_WRITE when registering encrypted memory regions, i.e. when pinning SEV/SEV-ES guest memory, to fix a regression with file-backed memory introduced by KVM's (correct) usage of long-term pins (This was reviewed by mm maintainers; for more information, see commit ee1a586dd1fa "KVM: SEV: Drop FOLL_WRITE for encrypted region registration") - Allocate full pages for SEV/SEV-ES {DE,EN}CRYPT ops on SNP-enabled hosts to fix a data corruption issue due to the PSP driver assigning to-be-written pages to firmware (as required by the SNP specs) - Unconditionally intercept ICBEP so that KVM generates the correct guest RIP when handling an ICEBP-induced TASK_SWITCH #VMEXIT - Harden the SNP "populate" ioctls against bad input, and to prepare for supporting in-place private<=>shared conversion Generic: - Remove kvm_debugfs_dir if kvm_init() fails after creating KVM's debugfs - Add a per-VM bitmap to track which vCPU IDs have been "claimed" but for which the vCPU isn't yet online, and use the bitmap to reject duplicate IDs before calling into arch code. This allows arch code to consume vcpu_id without having to worry about cross-vCPU clobbering (at least s390 and x86 have had related bugs) - Rework the so called "prepare" and "invalidate" guest_memfd hooks to prepare for in-place private<=>shared conversion, and clean up a few warts along the way Selftests: - Automatically allocate a full page for L2 guest stacks on x86 instead of requiring test-specific L1 guest code to carve out a portion of the L1 stack for L2 usage, and to ensure the L2 stack also adheres to the x86-64 calling convention ABI - Add a selftest to verify {Guest,Host}-Only behavior in x86's mediated PMU - Clean up nested SVM's handling of GPRs on L2<=>L1 transitions, reuse the functionality for nested VMX, and drop the ucall hack that was fudging around the lack of GPR switching on nVMX - Add a stress test to verify KVM doesn't clobber/drop #PF state, e.g. CR2, across save/restore, including when L2 is active - Add a test to verify KVM_CREATE_VM accepts exactly what is reported by KVM_CAP_VM_TYPES - Misc selftests fixes and cleanups - Fix several issues with seeding the pRNG, and rework the pRNG APIs to that the pRNG can be sanely used in host code, not just guest code - Add an IRQ test to validate virtual IRQ deliverty for IRQs wired up via KVM_IRQFD + KVM_SET_GSI_ROUTING, with optional support for triggering IRQs via writes to an assigned VFIO device - Add syscall wrappers to assert success on a variety of pthreads and CPU affinity APIs - Set vCPU pthread affinity as early as possible to reduce contention issues that were surfaced by PREEMPT_LAZY, which result in runtimes of over a minute on large hosts, versus the expected ~5 seconds - Rework the PMU counters test to run each testcase using a single VM with many vCPUs for each sub-testcase, instead of using a unique VM for each sub-testcase. This cuts the runtime by ~20x Miscellaneous: - MAINTAINERS updates for vfio-ap, guest_memfd, kvm-x86. Mostly representing the status quo more accurately, but also... welcome David Hildenbrand as guest_memfd reviewer!" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (413 commits) KVM: arm64: Validate GICv5 timer PPIs before claiming ownership KVM: arm64: vgic: Reject out-of-range GICv5 PPI IDs KVM: arm64: vgic: Prevent speculative SPI array underflow KVM: arm64: vgic: Free gic_kvm_info on initialization failure KVM: arm64: Avoid mismatched accesses to 'struct kvm_nvhe_init_params' s390/vfio-ap: Fix NULL deref in status_show() during queue probe s390/vfio-ap: Fix hot-unplug skipped when last AP adapter or domain removed s390/vfio-ap: fix potential use of uninitialized apm_filtered bitmap s390/vfio-ap: Fix control domain removal in vfio_ap_mdev_cfg_remove s390/vfio-ap: Fix required lock not held during update of ap_matrix_mdev object s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects s390/vfio-ap: Fix dereference matrix_mdev->kvm without checking for NULL s390/vfio-ap: Fix stale do_remove flag across iterations in vfio_ap_mdev_cfg_remove RISC-V: KVM: fix vcpu vector context handling for kernel-mode vector riscv: vector: allow non-preemptible kernel-mode vector with IRQs off riscv: vector: refactor riscv_v_start_kernel_context KVM: s390: gmap: Make prefix handling optional KVM: s390: gmap: Make CMMA optional KVM: s390: gmap: Make storage keys optional KVM: s390: Prepare gmap for a second KVM implementation ...

Merge tag 's390-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2026-08-23T17:26:44+00:00

Pull s390 updates from Vasily Gorbik: - Add a cpuidle driver with polling and enabled wait states using the existing CPU idle infrastructure and idle governor to improve latency for frequent sleep/wakeup cycles. Remove the obsolete tick delay heuristic and generic arch_needs_cpu() hook. Add the corresponding driver entry to MAINTAINERS - Add kCFI support using the generic support provided by Clang - Enable Clang CONTEXT_ANALYSIS for various architecture code and for char, PCI, CIO and virtio drivers. Add required lock annotations, exclude unsupported mm helpers and remove conditional PCI locking - Fix secure storage access exception handling and reintroduce DCACHE_WORD_ACCESS previously removed as a workaround - Fix cpum_cf perf crashes when CPUs are brought online while per-task events are active. Allocate and remove per-CPU counter data from CPU hotplug callbacks - Fix a deadlock when an s390dbf debug area is unregistered while one of its debugfs files is being written to - Fix MVIY_PERCPU() with binutils older than 2.39, where an assembler macro silently omitted an instruction needed to repair interrupted operations after CPU migration - Remove/replace cond_resched() calls which are no-ops with the supported s390 preemption models - Fix AP queue depth and maximum message length decoding according to the architecture. Current hardware is not affected, but future hardware could report values which were handled incorrectly - Reflect the configured CPU state in cpu_enabled_mask so deconfigured CPUs are not presented as available for onlining - Restore the vDSO GNU_EH_FRAME program header which was lost when the build switched to direct linker invocation, and mark it read-only - Add SCLP action qualifiers used by Spyre for card initialization, recoverable error and telemetry reporting - Move KMSAN interrupt flag helpers out of line to fix -Wstatic-in-inline build warnings - Use level-specific page table entry accessors for hugetlb entries and ptep_get() when accessing crashed kernel memory in kdump - Make forced AP bus rescans killable so that a user process blocked behind an ongoing scan can still be terminated with SIGKILL - Rework pkey ioctl error paths to remove duplicated cleanup code and avoid freeing error pointers - Allow the protected guest SWIOTLB buffer to be allocated outside the first 2GB. Also enable dynamic SWIOTLB growth and the coherent atomic pool fallback to improve I/O behavior when the initial pool is exhausted - Add program check statistics and spinlock contention tracepoints. Increase the lockdep chain capacity to keep lockdep enabled for complex code paths such as btrfs - Simplify IPL, trap and syscall code and remove the obsolete unistd_32.h generation entry * tag 's390-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (59 commits) s390/percpu: Fix MVIY_PERCPU() with older binutils s390/debug: Fix deadlock during unregister s390/cpum_cf: Handle CPU hotplug via prepare/dead callbacks s390: Enable CONTEXT_ANALYSIS for various directories s390/mm: Add __context_unsafe() attribute to gmap helper functions s390/mm: Add __context_unsafe() attribute to do_secure_storage_access() s390/sysinfo: Add context analysis attributes s390/irqflags: Add out-of-line definitions of arch_local_irq_*() for KMSAN s390/virtio: Enable CONTEXT_ANALYSIS s390/cio: Enable CONTEXT_ANALYSIS s390/vfio_ccw: Add __must_hold() attribute to vfio_ccw_sch_quiesce() s390/pci: Enable CONTEXT_ANALYSIS s390/pci: Rework __zpci_event_availability() to remove conditional locking s390/pci: Rework __zpci_event_error() to remove conditional locking s390/char: Enable CONTEXT_ANALYSIS s390/con3215: Add __must_hold() attribute to raw3215_make_room() s390/ap: Fix MAPML computation s390/cio: Remove cond_resched() calls s390: Remove cond_resched() calls KVM: s390: Remove cond_resched() calls ...