| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Link: https://lore.kernel.org/r/20260904045747.813364717@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Wentao Guan <guanwentao@uniontech.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20260905115635.269562615@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f5407e9b697c940e78b27ff63c6e14d8d171adc3 ]
Patch series "Fix incorrect access of hugetlb pte entries", v3.
There are various places which use ptep_get() to get the pte entry
corresponding to a hugetlb folio. Some arches (like s390) have special
handling to compute the pteval, so they provide huge_ptep_get(). Use this
helper consistently.
Additionally, some code paths may provide huge_ptep_get with an unaligned
address. This is a problem on arm64 (I checked other arches and it looks
fine for them), which is fixed in patch 1. The fix is made to be
backport-friendly: the cleaner fix would be to perhaps pass the hstate to
huge_ptep_get() - that is wider churn and we can do that later.
This patch (of 5):
try_to_unmap_one() handles hugetlb folios when memory failure needs to
replace a poisoned hugetlb mapping with a hwpoison entry. In that case
page_vma_mapped_walk() returns the pte pointer to the hugetlb folio in
pvmw.pte, but the code reads it with ptep_get().
On arches which provide their own huge_ptep_get() to dereference a huge
pte pointer, accessing via ptep_get() would cause pte_pfn(), pte_present()
etc to misbehave.
It is not clear whether this has a trivially visible effect to userspace.
Just use huge_ptep_get() for dereferencing a huge pte pointer.
Link: https://lore.kernel.org/20260703114202.365553-1-dev.jain@arm.com
Link: https://lore.kernel.org/20260703114202.365553-3-dev.jain@arm.com
Fixes: c7ab0d2fdc84 ("mm: convert try_to_unmap_one() to use page_vma_mapped_walk()")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reported-by: David Hildenbrand <david@kernel.org>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Harry Yoo <harry@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jann Horn <jannh@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Jun'ichi "Nick" Nomura <j-nomura@ce.jp.nec.com>
Cc: Kiryl Shutsemau <kas@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit aa62204cb680d8ff32497181fc9e0dac4956f7e5 ]
PMD 'non-swap' swap entries are currently used for PMD-level migration
entries and device private entries.
To add to the confusion in this terminology we use is_swap_pmd() in an
inconsistent way similar to how is_swap_pte() was being used - sometimes
adopting the convention that !pmd_none(), !pmd_present() implies PMD 'swap'
entry, sometimes not.
This patch handles the low-hanging fruit of cases where we can simply
substitute other predicates for is_swap_pmd().
No functional change intended.
Link: https://lkml.kernel.org/r/8a1704b36a009c18032d5bea4cb68e71448fbbe5.1762812360.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: f5407e9b697c ("mm/rmap: use huge_ptep_get() in try_to_unmap_one()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9a3f43b30373c61477d0d3ab52946c05f9492bf9 upstream.
Commit 833740a2333c ("platform/chrome: sensorhub: Bound the EC-reported
sensor number") evaluated the `sensor_num` against the bounds limit even
for timestamp events. A timestamp event typically has a `sensor_num` of
0xff [1], causing the driver to flag it as invalid and skip to the next
event.
As a result, we'd see a flooding of "Invalid sensor number 255 from EC"
warning logs and these timestamp events were being dropped.
Move the bounds-check into cros_ec_sensor_ring_process_event() and
evaluate it only after standalone timestamp events have already been
processed and returned early.
[1] https://crrev.com/219ca6ef82ba266da788b673ee4ad50bd3ea1285/common/motion_sense_fifo.c#427
Fixes: 833740a2333c ("platform/chrome: sensorhub: Bound the EC-reported sensor number")
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20260715024454.4127571-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 98df164036bed307a16e7c124ad023c2c13c4b76 upstream.
run_vmtests.sh runs on-fault-limit as the nobody user via "sudo -u nobody
./on-fault-limit", guarded by a check that nobody can access the binary
("sudo -u nobody ls ./on-fault-limit").
The guard resolves the relative path from the inherited working directory,
which only requires search permission on the test directory itself.
Classic sudo passes the relative path through to execve() the same way, so
the two agree. However, sudo-rs (the default sudo implementation since
Ubuntu 25.10) canonicalizes the command to an absolute path before
executing it, which requires search permission on every ancestor
directory. When the kernel tree lives under a private home directory
(mode 0750, the Ubuntu default for new users since 21.04), the guard
passes but the execution fails with "command not found", and the test is
reported as a false FAIL:
# running sudo -u nobody ./on-fault-limit
sudo: './on-fault-limit': command not found
# [FAIL]
Wrap the command in "sh -c" so that sudo only resolves the shell binary,
and the relative path is resolved by nobody's shell from the inherited
working directory, matching what the guard checks. This is the only "sudo
-u nobody" invocation in the script; uid, cwd, rlimits (including
RLIMIT_MEMLOCK, which this test exercises) and the exit status are
unchanged through sh.
Verified on Ubuntu 26.04 (sudo-rs 0.2.13): the test now runs and passes
instead of failing. Verified on Ubuntu 24.04 (sudo 1.9.15p5): behavior is
unchanged.
Link: https://lore.kernel.org/20260713092700.464376-1-injaeryou@gmail.com
Fixes: 5d2146a3354f ("selftests/mm: skip mlock tests if nobody user can't read it")
Signed-off-by: Injae Ryou <injaeryou@gmail.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Brendan Jackman <brendan.jackman@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a5a5ed23b1340ff0f32a14a7ca8585f7c4e9b2e2 upstream.
In udf_do_extend_file() the total extent length is rounded up to a block
boundary with:
iinfo->i_lenExtents = (iinfo->i_lenExtents + sb->s_blocksize - 1) &
~(sb->s_blocksize - 1);
i_lenExtents is a __u64, but sb->s_blocksize is unsigned long. On 32-bit
kernels unsigned long is 32-bit, so ~(sb->s_blocksize - 1) is a 32-bit
value (e.g. 0xfffff800 for a 2 KiB block) that is zero-extended in the AND,
clearing the upper 32 bits of i_lenExtents. For UDF files whose total
extent length exceeds 4 GiB this truncates i_lenExtents when the file is
extended, corrupting the tracked extent length.
Cast the block size to 64-bit before forming the mask. 64-bit kernels are
unaffected.
Fixes: 48d6d8ff7dca ("udf: cache struct udf_inode_info")
Cc: stable@vger.kernel.org
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Link: https://patch.msgid.link/20260722082425.213311-1-zhanxusheng@xiaomi.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c793bbfc4a0a9f5a66978fc91559e9681748dbeb upstream.
When timers are migrated away from an offline CPU the debugobjects state
gets corrupted. The timer is accounted as inactive on deletion, but the
enqueue on the alive CPU lacks the activation call.
That used to work, but got broken when the trace point and the debug
objects call got separated. That change missed to fixup
migrate_timer_list().
Add the missing debug_timer_activate() invocation to fix it.
Fixes: dc1e7dc5ac62 ("timer: Move trace point to get proper index")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/87bjb0l7ha.ffs@fw13
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4b61084b11bcecce86d03804ff30f8d7b465593c upstream.
If the auxiliary clock is disabled during tk_get_aux_ts64() but is enabled
before tks->clock_valid is checked, then uninitialized stackdata will be
used in the calculations and indirectly leaked to userspace.
The same race window also exists after this change and also for the core
timekeeper. But in these cases the only effect would be incorrect
adjustments and this is userspace's responsibility to avoid this.
Fixes: 4eca49d0b621 ("timekeeping: Prepare do_adtimex() for auxiliary clocks")
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260731-timekeeping-aux-adjtimex-return-v1-1-b7fea4692886@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f58a5335cdd14b3fb5f2a5d3763dee1f5cba1d3 upstream.
parse() hands nla_strscpy() len as dstsize, and nla_strscpy() copies at
most dstsize - 1 bytes. When the attr payload comes in without a trailing
NUL, srclen == len >= dstsize and the last character of the cpumask string
gets cut off. Register "0-15" and you are silently listening on "0-1",
exit data for the rest never shows up.
The bug only bites when the sender doesn't NUL terminate the payload;
senders that include the NUL were always fine (srclen gets decremented for
the trailing NUL, so srclen < dstsize). Thats probably why this survived
20 years. And the policy is NLA_STRING, not NLA_NUL_STRING, so a payload
without the trailing NUL is legit input here.
Skip the kmalloc/nla_strscpy dance entirely and use nla_strdup(), which
already allocates srclen + 1 and terminates. The nla_len() bounds checks
stay as they were.
Link: https://lore.kernel.org/EC49FE41-7F5F-41E0-A07A-ABEB8ECA514D@grrlz.net
Fixes: f9fd8914c1ac ("[PATCH] per-task delay accounting taskstats interface: control exit data through cpumasks")
Signed-off-by: Bradley Morgan <include@grrlz.net>
Reported-by: Oleg Deomi <oleg.deomi@gmail.com>
Closes: https://lore.kernel.org/CAByWkfZ6b1=3H9pwkz-dDQOs9cZaF-HYQ6b9Yb0=Hq2r1Vv_Pw@mail.gmail.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fedc88e38ce979a720cd2de042578cb5df3dc8de upstream.
When inspecting the credentials of another task, objective credentials
(->real_cred, accessed with __task_cred()) must always be used.
Accessing ->cred on a non-current task is forbidden unless that task is
being created or destroyed; a task is allowed to change its own ->cred
pointer with no synchronization, and changing ->cred should only affect the
current syscall.
smack_file_send_sigiotask() was accessing both sets of credentials: First
tsk->cred, then __task_cred(tsk).
Fix it, always access the objective credentials here.
I have tested that this bug can lead to a KASAN-reported UAF of struct cred
in smack_file_send_sigiotask(), and that this fix prevents the race.
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d19cdc167e696714509e87d3f7ae765b6e164589 upstream.
send_signal_locked() rewrites sender ids for the target namespace. Group
sends reuse the same siginfo, so one recipient can affect the next.
Copy the siginfo before changing it.
Link: https://lore.kernel.org/86a8857d58d43ee26a8b365b837fd24830343494.1782159692.git.include@grrlz.net
Fixes: 7a0cf094944e ("signal: Correct namespace fixups of si_pid and si_uid")
Signed-off-by: Bradley Morgan <include@grrlz.net>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Adrian Huang <adrianhuang0701@gmail.com>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit de508ece1d37cdbbbfa52f074954310f9b066b13 upstream.
If a machine has multiple graphic cards, detect the graphic card which is used
to display firmware messages and use that one as the default graphic card for
sticon and fbcon.
On parisc machines the default graphic card used for BCH (boot console
handler, aka BIOS menu) is stored in the stable storage (equivalent to CMOS
storage on x86) or in the console path in page zero. Extract that path and
store it as default STI path for later comparism. Take care that the graphic
card can be a GSC or a PCI card which use different path strings.
Increase max string size for default_sti_path to 32 chars as the
print_pa_hwpath() function formats a hardware path using unbounded sprintf
calls for up to 6 bus converter components and 1 module component (e.g.,
255/255/...), which can produce a string up to 28 bytes long.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7170ca01623b399c97f2ae9d3e228badc1f25ea3 upstream.
cad_pid is global, and kill_cad_pid() is only used in the root namespace.
However, due to pid_table_root_permissions(), a non-root user can unshare
pid/user namespaces and modify it from the child namespace. This makes no
sense and is simply wrong.
Move it to kern_reboot_table[] where it logically belongs; this ensures
that only GLOBAL_ROOT_UID can read/modify this sysctl.
Note that this patch doesn't preserve "#ifdef CONFIG_PROC_SYSCTL" around
the "cad_pid"; CONFIG_PROC_SYSCTL selects CONFIG_SYSCTL, so it is always
set when kern_reboot_table[] is compiled.
Cc: stable@vger.kernel.org
Fixes: e054bcbe7e7a ("sysctl: move cad_pid into kernel/pid.c")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Bradley Morgan <include@grrlz.net>
Reviewed-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 705c4ed0643366963547b2616d53165f2519c81f upstream.
i2c_nuvoton_wait_for_stat() enables the IRQ before waiting for the
interrupt handler to report a status change. If the wait times out, or is
interrupted before the handler runs, the function returns without
balancing the enable_irq() call.
Disable the IRQ before leaving the failed wait path. Also preserve an
interrupted wait's original error code instead of converting it to
-ETIMEDOUT inside the helper.
Cc: stable@vger.kernel.org # v5.10+
Fixes: 4c336e4b1556 ("tpm: Add support for the Nuvoton NPCT501 I2C TPM")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20260626091653.54929-1-mhun512@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 72e67c118642634c25465db0c8bcfa54c4ce086c upstream.
The size of a sequential zone backing file records the amount of data
written and is used to restore the zone state. A backing file whose size
is equal to the zone capacity is restored as a full zone, while a file
larger than the zone capacity is rejected as invalid.
However, zloop_finish_zone() currently truncates the backing file to the
zone size. For devices with a reduced zone capacity, finishing a zone
therefore creates a backing file larger than the zone capacity. After the
device is removed and later re-added, that zone file is rejected instead
of being restored as a full zone.
Truncate finished sequential zones to the zone capacity, matching the
persistent representation accepted by zloop_update_seq_zone() for a full
zone.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Fixes: eb0570c7df23 ("block: new zoned loop block device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/B39E5FD81D1A07F4+20260804023403.939767-1-raoxu@uniontech.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 789763523fb43cdc328de5cb5dcd19240ccf90d8 upstream.
XArray operations that allocate xa_nodes, such as xas_nomem() and
xas_alloc(), add __GFP_ACCOUNT when the array has XA_FLAGS_ACCOUNT set.
This charges the allocated memory and avoids the workingset convergence
issue described by commit 7b785645e8f13 ("mm: fix page cache convergence
regression").
xas_split_alloc() does not add _GFP_ACCOUNT when XA_FLAGS_ACCOUNT is
present. Fix it.
Link: https://lore.kernel.org/20260804-add-gfp_account-to-xas_split_alloc-v3-2-38cb3ff325c5@nvidia.com
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 169ae5e65e5aaf213b6a578f6478a9fd2e523606 upstream.
w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire
to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the
device. The downstream slave puts a length byte in buf[0]. The driver
then reads that many bytes into buf[1] with w1_f19_i2c_read().
buf[0] is controlled by the device and can be 0 to 255.
w1_f19_i2c_read() only rejects a zero count. The caller buffer is
I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read
run past it, up to about 222 bytes out of bounds.
The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That
check runs after master_xfer returns. By then the write is already
done. i2c-algo-bit rejects an oversize length before it copies, and
returns -EPROTO.
Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the
same way i2c-algo-bit does.
Fixes: ebc4768ac497 ("add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260629121043.199487-1-maoyixie.tju@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 728836ebca239810f164262b10211ef59182f811 upstream.
virtio_vsock_remove() stops the virtqueues and then flushes each work
item before freeing the enclosing virtio_vsock. The current order does
not account for dependencies between those items: tx_work may queue
send_pkt_work, and send_pkt_work may queue rx_work.
In particular, send_pkt_work can set restart_rx and release tx_lock.
The remove path can then stop the queues and flush rx_work before
send_pkt_work queues it. Although the later send_pkt_work flush waits
for that producer to finish, nothing waits for the newly queued rx_work,
so kfree(vsock) can race with it.
KASAN reported:
BUG: KASAN: slab-use-after-free in
virtio_transport_rx_work+0x487/0x4b0
Read of size 8 at addr ffff888114c2b008 by task kworker/1:1/47
Workqueue: virtio_vsock virtio_transport_rx_work
Call Trace:
virtio_transport_rx_work+0x487/0x4b0
process_one_work+0x688/0x1120
worker_thread+0x45b/0xd10
Allocated by task 1:
virtio_vsock_probe+0xef/0x6b0
Freed by task 84:
kfree+0x131/0x3c0
virtio_vsock_remove+0xd1/0x100
Flush the works in producer-to-consumer order. virtio_vsock_vqs_del()
has already disabled the queue callbacks and cleared the run flags, so
after tx_work and send_pkt_work are drained, no source remains that can
queue rx_work after its flush.
Fixes: 0ea9e1d3a9e3 ("VSOCK: Introduce virtio_transport.ko")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Link: https://patch.msgid.link/20260822164556.3750959-1-nicoyip.dev@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 653c6e289b13cc6942f3e8f8e3c568e70fa42d1f upstream.
The default EEPROM firmware is parsed and copied as a full EEPROM
without checking its length. A truncated file can make the driver
read beyond the firmware buffer during variant validation or the
fallback copy.
Reject files shorter than MT7996_EEPROM_SIZE before parsing or
copying the firmware.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Cc: stable@vger.kernel.org
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Link: https://patch.msgid.link/20260713115412.67095-1-acharyalaxman8848@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit deaa2e3656937fbbe312f0ee2616c756c6e2511f upstream.
mt7996/mt7992 hand the firmware a HW MAC-TXP for AddBA req action frames
(MT_TXD7_MAC_TXD, set in mt7996_mac_write_txwi_80211()), but are otherwise
FW-TXP devices. On tx free mt76_connac_txp_skb_unmap() therefore decodes
the per-frame txp as a struct mt76_connac_fw_txp. For a MAC-TXP the
fw_txp.nbuf byte aliases the AddBA TID word (MT_TXP1_TID_ADDBA), which is
always zero, so the unmap loop runs zero times and the skb DMA mapping in
buf[1] is never unmapped. buf[1].skip_unmap is set unconditionally, so the
generic DMA-ring cleanup skips it as well.
Each AddBA req therefore leaks one TX DMA mapping, roughly one per
(re)association. With WED enabled these mappings are bounced through the
WED swiotlb pool, so under continuous client reconnect churn the pool is
exhausted after ~1-2 days, after which DMA mapping fails for WED, the WiFi
MCU and other on-SoC consumers.
Keep the deferred (token release) unmap that the design relies on, and add
an mt7996-specific txp unmap that inspects MT_TXD7_MAC_TXD and unmaps
buf[1] from the MAC-TXP layout for those frames, delegating to
mt76_connac_txp_skb_unmap() otherwise.
Cc: stable@vger.kernel.org
Fixes: cb6ebbdffef2 ("wifi: mt76: mt7996: support writing MAC TXD for AddBA Request")
Link: https://patch.msgid.link/20260722082610.2699628-13-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 81faf578320df2dfc682a96baa6e85851dd68b6f upstream.
mt7925 queues mlo_pm_work with a 5 second delay during multi-link
power-save setup and never cancels it on the stop path. If the device is
torn down inside that window, the work outlives the teardown and its timer
fires afterwards, trying to queue onto the workqueue that is already gone:
workqueue: cannot queue mt7925_mlo_pm_work [mt7925_common] on wq phy0
WARNING: kernel/workqueue.c:2283 at __queue_work+0x59/0xa0, CPU#1: swapper/1/0
call_timer_fn+0x2a/0x140
__run_timers+0x203/0x330
run_timer_softirq+0x86/0xf0
mt7921 already has its own stop callback, so add one for mt7925 that
cancels the work before calling mt792x_stop(). mt7925_ops backs both the
PCIe and USB drivers, so this covers both.
Fixes: 276a56883257 ("wifi: mt76: mt7925: update the power-saving flow")
Cc: stable@vger.kernel.org
Tested-by: Traockl <281473483+Traockl@users.noreply.github.com>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627202946.25598-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 44b5adfe49499f53002737f5fe81d608c08122fc upstream.
mt7915_mcu_get_eeprom() copies a fixed EFUSE block into the driver's
dev->mt76.eeprom.data buffer at the offset reported by the MCU response
(res->addr, a device-controlled __le32) without checking it against the
buffer size. A malicious or malfunctioning device can report an arbitrary
address and drive a 16-byte out-of-bounds write past eeprom.data.
Reject a response whose address would place the copy outside eeprom.data
before deriving the destination pointer. Devices that echo the requested
in-bounds offset are unaffected.
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260625-b4-disp-16f99062-v1-1-aee52ecf61b9@proton.me
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bda8324270b1ac91bfba1df8928e0570e29759e8 upstream.
mt7615_suspend() acquired the mt76 mutex and then called
cancel_delayed_work_sync() on mac_work. mt7615_mac_work() acquires the
same mutex via mt7615_mutex_acquire() at the top of the worker, so if
mac_work is already running and blocked on the mutex, the suspend path
deadlocks waiting for the work it holds the mutex against.
Flush scan_work and mac_work before taking the mutex, matching the
suspend paths in mt7921 and mt7925. scan_work only takes the mt76
spinlock, but moving it keeps the sequence consistent. This also keeps
mac_work from running over an already suspended HIF, which the previous
split (async cancel under the lock, sync cancel after release) would
have allowed.
Fixes: c6bf20109a3f ("mt76: mt7615: add WoW support")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260612041331.2596331-1-runyu.xiao@seu.edu.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e779df4806cd29cbcca5c9dc0a1073662c76b889 upstream.
rtw_pci_probe() allocates PCI resources through
rtw_pci_setup_resource() before it sets up NAPI. If
rtw_pci_napi_init() fails, the error path jumps straight to
err_pci_declaim and skips rtw_pci_destroy(), leaving the PCI
resources allocated by rtw_pci_setup_resource() behind.
Add a dedicated cleanup label for the NAPI setup failure path so probe
destroys the PCI resources.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing current
mainline kernels. The tool is still under development and is not yet
publicly available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable rtw88 PCI board to test with, no runtime testing was able to be
performed.
Fixes: d0bcb10e7b94 ("wifi: rtw88: Un-embed dummy device")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260617013502.114057-1-dawei.feng@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9f2948010764d708bda27369d09ce6f194abe8e3 upstream.
The skb passed to the rtw_hci_tx_write() is expected to be freed when
the function fails, but the error path in rtw_txq_push_skb() does not
free the skb before returning. This can lead to a memory leak in
rtw_txq_push() where a dequeued skb is passed to rtw_txq_push_skb().
Fixes: aaab5d0e6737 ("rtw88: kick off TX packets once for higher efficiency")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260727064223.61836-1-nihaal@cse.iitm.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6496ce90845df2d22fb8e8ed235cd2936fad41c8 upstream.
The memory allocated inside rtl92du_init_shared_data() is not freed in
any of the subsequent error paths in rtl92du_init_sw_vars().
Fix that by adding a call to rtl92du_deinit_shared_data() in the error
path.
Fixes: b5dc8873b6ff ("wifi: rtlwifi: Add rtl8192du/sw.c")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260723114539.136986-1-nihaal@cse.iitm.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed4f05d9f2f42fd866f55108db8123eefcc5fb33 upstream.
rtl92du_tx_fill_desc() uses ieee80211_get_tid() to read the QoS TID
from the 802.11 header and then uses it as an index into
sta_entry->tids[]. ieee80211_get_tid() returns the low 4-bit QoS TID
value, so the result can be in the range 0..15.
rtlwifi only allocates MAX_TID_COUNT entries for sta_entry->tids[], and
MAX_TID_COUNT is 9. A QoS TID greater than 8 therefore indexes past the
aggregation state array. Keep the default RTL_AGG_STOP state for
out-of-range TIDs, matching rtl92cu_tx_fill_desc().
This issue was detected by our static analysis tool and confirmed by
manual audit. UBSAN validation for the same bug pattern reports an
array-index-out-of-bounds access with index 10 for type
'rtl_tid_data [9]'.
Fixes: 8321424134a4 ("wifi: rtlwifi: Add rtl8192du/trx.{c,h}")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260620025632.46206-1-runyu.xiao@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 799b5f45cb8194ebd06c9c89e0afdad5bedd2cc5 upstream.
Commit 7738a7ab9d12 ("misc: eeprom: eeprom_93cx6: Add quirk for extra
read clock cycle") added extra 'quirk' field to struct eeprom_93cx6.
Many existing users of eeprom_93cx6, including rtl818x drivers, allocate
the structure on the stack without initializing all fields. As a result,
the added quirk field has an undefined value and can randomly cause
reading wrong data from the EEPROM.
Fix by initializing the structures with {}.
Fixes: 7738a7ab9d12 ("misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycle")
Cc: stable@kernel.org # v6.13+
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260723110640.8588-1-stf_xl@wp.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef06882c7d8a7400b67d0d003b1008093dd589ed upstream.
mwifiex synchronous commands keep the caller-provided data buffer in
cmd_node->data_buf. Several callers pass stack-allocated objects there.
If wait_event_interruptible_timeout() is interrupted, the caller can
return and release that stack object while the firmware command is still
the current command. A late firmware response then reaches the normal
response handler, which can copy data through cmd_node->data_buf into the
stale stack address.
This fixes a stack corruption observed during repeated association and
disassociation cycles. The panic trace showed the command wait being
interrupted immediately before a bad pointer dereference:
cmd_wait_q terminated: -512
Unable to handle kernel paging request at virtual address 002c583837384662
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted
...
Tainted: [M]=MACHINE_CHECK
The fault address decodes as little-endian ASCII:
0x002c583837384662 -> "bF878X,\0"
which is a fragment of the VERSION_EXT firmware string exposed as
debugfs "verext":
w8997o-V4, RF878X, FP92, 16.92.21.p153.7
The same runs also showed corrupted control data containing:
0x2400372e333531 -> "153.7\0$"
which is the tail of the same VERSION_EXT string. This points at a late
VERSION_EXT response writing through a stale stack-backed data_buf after
the interrupted wait returned.
After cancelling pending commands on an interrupted or timed-out wait,
detach the caller-owned data buffer from the still-current command. This
preserves the existing command cancellation behaviour while preventing a
late response from writing through a pointer whose lifetime ended with the
waiting caller.
Tested on an i.MX8MP board using an 88W8997.
Cc: stable@vger.kernel.org
Fixes: 3d026d09b28d ("mwifiex: cancel pending commands for signal")
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Link: https://patch.msgid.link/20260724203320.78793-1-festevam@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a78446ee6fae86ac8733f120e3ffce2e5d9384f5 upstream.
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ss support which is one of the only remaining ones.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. Also, it had a buffer
overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'.
There's no point in fixing these bugs separately only to remove the code
anyway, so this commit is marked with Fixes and Cc stable.
Fixes: ac2614d721de ("crypto: sun8i-ss - Add support for the PRNG")
Cc: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 011556f71d094da61379ae3672692cae2795304e upstream.
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ce support which is one of the only remaining ones.
Note that the sun8i-ce support for hwrng remains in place. That is the
interface that actually matters.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. There's no point in fixing
this separately only to remove the code anyway, so this commit is marked
with Fixes and Cc stable.
Fixes: 5eb7e9468884 ("crypto: sun8i-ce - Add support for the PRNG")
Cc: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6c080026ecc17eecb103f8927c64ea73a74bb818 upstream.
rtl8xxxu arms rx_urb_wq from the RX completion path:
rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which
queues it on rx_urb_pending_list and, once the list grows past
RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker
rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through
container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(),
which anchors it on rx_anchor and dereferences priv->udev.
rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_watchdog,
update_beacon_work) but never cancels rx_urb_wq, so a worker armed during
the last burst of RX traffic can run rtl8xxxu_rx_urb_work() after
rtl8xxxu_disconnect() has called ieee80211_free_hw(), which frees priv,
producing a use-after-free. The window opens under active RX traffic
(pending count above the watermark) followed by a disconnect.
There are two teardown races to close:
* rtl8xxxu_queue_rx_urb() decided whether to enqueue under rx_urb_lock
but called schedule_work() after dropping the lock. A completion
that observed shutdown == false and released the lock could then call
schedule_work() after rtl8xxxu_stop() had set shutdown and
cancel_work_sync() had already returned, arming the worker to run
after the teardown. Move schedule_work() under the same !shutdown
branch so the arming decision is atomic with the shutdown check.
* rtl8xxxu_rx_urb_work() anchors every URB it drained back onto
rx_anchor through rtl8xxxu_submit_rx_urb(). A worker still running
when usb_kill_anchored_urbs(&priv->rx_anchor) returned would submit a
URB that escaped the kill. In rtl8xxxu_stop(), call
cancel_work_sync(&priv->rx_urb_wq) before the kill so the worker is
drained first.
After priv->shutdown is set under rx_urb_lock, completions can no longer
queue rx_urb_wq. cancel_work_sync() then drains the last queued or running
worker, and the following usb_kill_anchored_urbs() kills the URBs it may
have submitted.
rtl8xxxu_disconnect() is covered because ieee80211_unregister_hw()
guarantees .stop() runs for a live interface before ieee80211_free_hw()
frees priv. The probe error path needs no cancel: rx_urb_wq is
INIT_WORK()'d there but cannot have been scheduled, since no URB is
submitted before ieee80211_register_hw() succeeds.
This bug was found by static analysis.
Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260630033117.3377-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 67105abd6195a685a84dcb8a5daf54a1f4bfdb60 upstream.
In iwl_op_mode_dvm_start(), jumping to out_free_eeprom currently bypasses
the out_free_eeprom_blob label. Consequently, error paths triggered after
successfully parsing the EEPROM free priv->nvm_data but leak
priv->eeprom_blob.
Fix this memory leak by reordering the error handling labels so
that out_free_eeprom falls through to out_free_eeprom_blob.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have
supported Intel DVM wireless hardware and firmware to test with, no
runtime testing was able to be performed.
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260624084404.570703-1-dawei.feng@seu.edu.cn
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d10db8e94fcb23a799789aaa696b4d8f937e207 upstream.
The memory allocated for buf is not freed in some of the error paths in
brcmf_sdio_read_control(). Fix that by adding vfree() calls.
Cc: stable@vger.kernel.org
Fixes: dd43a01c5cdb ("brcmfmac: use dynamically allocated control frame buffer")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
[arend: rework as suggested by Johannes]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260803093506.1647790-1-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1364afd3e2e76e007a2c07ec95704d56980226f0 upstream.
During re-attach, the device may change its position in the i3c->addrs[]
array. As a result, it may use a different Device Address Table Basic
Register (DATBAS), which needs to be reconfigured.
Reconfigure the DATBAS register on re-attach. Along with it update
software caches.
Fixes: d028219a9f14 ("i3c: master: Add basic driver for the Renesas I3C controller")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260713130545.568657-5-claudiu.beznea+renesas@tuxon.dev
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 797ed83c0cd495be4b345750c59e0363bf4d6207 upstream.
The controller uses DATBAS registers on TX/RX logic. Clean the DATBAS
register for the detached I3C device to avoid issues.
Fixes: d028219a9f14 ("i3c: master: Add basic driver for the Renesas I3C controller")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260713130545.568657-8-claudiu.beznea+renesas@tuxon.dev
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5f1a76ecfe90544a28d657306c9b3caa66ba0e63 upstream.
The Renesas I3C driver uses an asynchronous model to transfer data. It
prepares a struct renesas_i3c_xfer, enqueues it, and waits for completion.
The interrupt handler dequeues the transfer, updates/uses it, and signals
the waiting thread.
If the completion times out, the waiting thread dequeues the transfer and
free it. If an interrupt fires after that, the handler may access freed
memory, leading to crashes.
Check that the transfer is still valid before accessing it in the
interrupt handler. With it clear any status flags and disable all
the interrupts to avoid triggering the same interrupts again.
Fixes: d028219a9f14 ("i3c: master: Add basic driver for the Renesas I3C controller")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260713130545.568657-2-claudiu.beznea+renesas@tuxon.dev
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e2bda39d7f9f285ec803e200b5c1f17143d0b483 upstream.
svc_i3c_master_handle_ibi() reads the IBI payload from the RX FIFO into
the IBI slot. The loop is bounded by the hardware FIFO size
(SVC_I3C_FIFO_SIZE), not by the slot size.
slot->data points into the IBI pool, which i3c_generic_ibi_alloc_pool()
sizes at max_payload_len per slot. svc_i3c_master_request_ibi() only
rejects a max_payload_len larger than SVC_I3C_FIFO_SIZE, so a driver can
request a smaller one. mctp-i3c requests 1. Each readsb() then copies the
controller RXCOUNT bytes (up to 31) with no check against the slot size.
A device that sends more bytes than the slot holds writes past
slot->data, an out-of-bounds write into the IBI pool.
Bound the loop by dev->ibi->max_payload_len and clamp each read to the
space left in the slot, the same way dw-i3c does. A device can still send
more than the requested payload. Flush the leftover bytes from the RX FIFO
so they do not leak into the next transfer.
Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: stable@vger.kernel.org
Co-developed-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/178227747353.2931373.15868718612134648277@maoyixie.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d2c743efd2d1ee64e94324664808f623dd865872 upstream.
i3c_master_unregister_i3c_devs() clears i3cdev->dev->desc before
calling device_unregister(). During device_unregister(),
device_del() emits a KOBJ_REMOVE uevent and unbinds the driver while
the device descriptor is still expected to be valid. As a result,
i3c_device_uevent() and a racing modalias_show() can observe a NULL
desc and fall back to an uninitialized stack struct i3c_device_info,
leaking kernel stack contents in the generated modalias. Driver
.remove() callbacks may also encounter an unexpected NULL desc during
unbind.
Keep desc valid until device_unregister() has completed. Since
device_unregister() drops the device reference and may free the device,
take an extra reference with get_device() before unregistering. Clear
desc afterwards and release the extra reference with put_device().
This preserves the release-time invariant that desc must be NULL while
avoiding both the information leak and a potential use-after-free from
writing desc after the device has been released.
Reported-by: sashiko-bot@kernel.org
Link: https://lore.kernel.org/linux-i3c/20260702190003.8BF741F000E9@smtp.kernel.org/
Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260723075747.34049-1-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a53f9102a0d3eeb8784999f925028acf339c276 upstream.
adi_i3c_master_probe() requests the IRQ and unmasks REG_IRQ_PENDING_CMDR
before the controller's IBI state, transfer queue list and transfer
queue lock are initialized. A pending CMDR interrupt can therefore run
adi_i3c_master_irq() and take master->xferqueue.lock before the dynamic
lock has been initialized.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the probe ordering and the IRQ path
adi_i3c_master_probe() -> adi_i3c_master_irq() -> xferqueue.lock, with a
pending CMDR interrupt arriving after REG_IRQ_PENDING_CMDR is unmasked.
Lockdep reported:
INFO: trying to register non-static key.
you didn't initialize this object before use?
lock_acquire+0xbb/0x290
_raw_spin_lock_irqsave+0x36/0x60
adi_i3c_master_irq+0x32/0x56 [vuln_msv]
adi_i3c_master_probe+0x5a/0xf47 [vuln_msv]
Initialize the transfer queue and IBI state before requesting and
unmasking the IRQ.
Fixes: a79ac2cdc91d ("i3c: master: Add driver for Analog Devices I3C Controller IP")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260617150138.628578-1-runyu.xiao@seu.edu.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c2e894eac398b258f12fdec73ed6ba081047f7b3 upstream.
In kset_replay, when key->seg_gen is stale (key->seg_gen <
key->cache_pos.cache_seg->gen), cache_key_put(key) is called but then
key->cache_pos.cache_seg is accessed as the argument to cache_seg_get().
This is a use-after-free on the freed key memory. Although mempool
recycled memory is not immediately reclaimed or overwritten in practice,
this is still a potential UAF bug.
Additionally, for expired invalid keys, setting the cache->seg_map bit
and calling cache_seg_get() is unreasonable since the corresponding
segment data is no longer valid.
Fix both issues by moving cache_seg_get() and __set_bit() after the
gen check, so they only execute for valid keys, and using continue to
skip invalid keys.
Cc: stable@vger.kernel.org
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Signed-off-by: Jianyun Gao <jianyungao89@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb9e17287a4ea1cbbcedc77e6866978ecc2a7b55 upstream.
When setting gc_percent via message, kstrtoul parses the input into an
unsigned long, which is then implicitly truncated to u8 when passed to
pcache_cache_set_gc_percent(). For example, value 266 (0x10A) silently
truncates to 10 (0x0A), successfully bypassing the > 90 upper bound
check in pcache_cache_set_gc_percent(), and setting a different value
than the user intended.
Use kstrtou8 directly instead of kstrtoul, so that overflow values are
properly rejected.
Cc: stable@vger.kernel.org
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Signed-off-by: Jianyun Gao <jianyungao89@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2df0fc042e299bae3c0f60ea5cd2af9285658e9f upstream.
get_cache_segment() scans the segment map up to cache->n_segs, the
physical device segment count, but cache_segs_init() only initializes
the first cache_info->n_segs segments. A crafted image with
cache_info->n_segs smaller than the device count leaves the remaining
pcache_cache_segment structs zeroed (segment.data == NULL), and the
allocator can hand one to cache_kset_close(), which writes through the
returned segment's data pointer with no NULL check.
Bound the allocator's search to cache_info->n_segs so only initialized
segments are ever returned. A conforming cache sets n_segs equal to the
device segment count, so this rejects nothing legitimate.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 16c3b3a326e70f246a605b3dc27b7f83ba4743e3 upstream.
cache_replay() follows the on-media last-kset chain by next_cache_seg_id
with no cond_resched(). A forged chain that points back into a segment it
has already visited makes the replay loop follow it forever.
Cap the last-kset hops at cache->n_segs; a valid chain visits each segment
at most once.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit becf07e2b0053027495ecd671b1f82fb2e615f68 upstream.
The tail-kset read in cache_replay(), the writeback worker and the GC
worker bounds its length by PCACHE_SEG_SIZE - seg_off, the raw segment
size rather than the data region. A tail near the segment end reads past
the segment data into the following control area.
Clamp the read to cache_seg_remain(), the data region.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d1898576090a10d2ac2715218a652e78fb65a6b0 upstream.
cache_pos_decode() takes the persisted key_tail and dirty_tail seg_off from
the cache device and addresses within the segment with it. A seg_off at or
past the segment data_size, controllable by whoever supplies the device
(CAP_SYS_ADMIN), reads past the segment data.
Reject a decoded seg_off that is not below the segment data_size.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 62d92e45abe9e087370f9fc5d876b95673aced34 upstream.
seg_num is read from the crc32c-only superblock, so whoever supplies the
cache device on a table load (CAP_SYS_ADMIN) controls it. It sizes
cache->segments[] and is the value every later on-media segment id is
bounded against, yet it is never checked against the device. Because
cache_dev->mapping is the direct map of the pmem, CACHE_DEV_SEGMENT() for
a segment id past the device resolves to ordinary kernel memory beyond
the mapping; a new-cache init reaching such an id has cache_seg_init() ->
cache_dev_zero_range() memset() 12 KiB over that memory -- an
out-of-bounds write into the kernel heap at table load. A zero seg_num
makes the segment allocations ZERO_SIZE_PTR.
Reject a seg_num that is zero, larger than the device can hold, or larger
than PCACHE_CACHE_SEGS_MAX before it is used.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f11deb032fd84081e7831cffcba895d893054a22 upstream.
Two more fields decoded from the cache device go unbounded. The kset
key_num drives cache_kset_crc() and the replay loop in cache_replay(),
the writeback worker and the GC worker, but only the magic and a
fixed-seed CRC are checked first, so a non-last kset whose key_num exceeds
the PCACHE_KSET_KEYS_MAX buffer reads past its end before the CRC compare.
A key's intra-segment offset and length in cache_key_decode() are taken
verbatim, so a key running past its segment is replayed into the cache
tree and the data CRC check and every later read hit then copy adjacent
persistent memory into the caller's bio -- an out-of-bounds read that
leaks to user space. Both fields are controlled by whoever supplies the
cache device (CAP_SYS_ADMIN); the CRC seed is public.
Add kset_onmedia_valid() to bound key_num before any kset read, and
reject a key whose offset plus length, computed in 64 bits, exceeds the
segment data_size. Valid metadata is unaffected.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 32d1809da31094ef76fd98dc1f1a8b55ca1295dd upstream.
cache_segs_init() iterates cache_info->n_segs times indexing
cache->segments[], which is sized to the cache device geometry, and
get_seg_id() takes each segment id from the on-media cache_info and the
per-segment next_seg link. Both come from cache device metadata that is
only CRC-protected with a fixed public seed, so whoever supplies the
cache device on a table load (CAP_SYS_ADMIN) controls them: an oversized
n_segs or an out-of-range id drives an out-of-bounds access of
cache->segments[] and a wild CACHE_DEV_SEGMENT() pointer into the device
mapping -- an out-of-bounds read and write from on-disk data.
Reject an n_segs that exceeds the device segment count and a segment id
that is out of range before either is used. Valid metadata is unaffected.
Fixes: 1d57628ff95b ("dm-pcache: add persistent cache target in device-mapper")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
