| Age | Commit message (Collapse) | Author |
|---|
|
The umdbr field in struct bnxt_re_db_region returns the raw
unmapped PCI BAR address of the doorbell region. Avoid sharing
this field to the userspace. Change this to a reserved field
and stop populating it, keeping the ABI layout and size
unchanged for existing binaries.
Fixes: 1234a9d8aebb ("RDMA/bnxt_re: Support doorbell extensions")
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Link: https://patch.msgid.link/20260824172443.33943-1-sriharsha.basavapatna@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
IMA shouldn't measure or appraise configfs, but currently does because
it's missing from the default exclusion policies. Move CONFIGFS_MAGIC to
magic.h to expose the file system's magic to IMA, as well as other userland
applications.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Frederick Lawler <fred@cloudflare.com>
Acked-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
The available-counter mask was a single unsigned long, but iteration
uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object.
Filling with an unsigned-long bit at index 32 and above is also wrong.
Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word
into CFG_MATCH when checking events, when allocating an index, and when
stopping all counters. Set the counter base to i times BITS_PER_LONG.
Share the CFG_MATCH ecall through a small helper so the 32-bit argument
split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits
above XLEN set, so the first word alone is not enough.
Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension")
Assisted-by: DeepSeek:deepseek-v3
Signed-off-by: Xixin Liu <liuxixin@kylinos.cn>
Link: https://patch.msgid.link/prpmask02cmap.v2.1786434000.git.liuxixin@kylinos.cn
Cc: stable@kernel.org
[pjw@kernel.org: updated to apply; fixed checkpatch.pl issues]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
The trace instance files set_ftrace_filter and set_ftrace_notrace was
updated to work with specific trace instances (trace_arrays). The issue is
that when these files are opened, there is a small race window where it
will use the ftrace_ops from the inode->private pointer to get a reference
to the trace_array and then take its reference. The problem is that the
ftrace_ops itself could be freed. If the rmdir on the instance happens at
the same time the set_ftrace_filter file is opened, the rmdir could have
also freed the ftrace_ops and referencing it will cause a use-after-free
bug and crash the kernel.
Instead, pass in the trace_array as the file private data (NULL for the
top level instance), and then pass both the trace_array and the ftrace_ops
to the ftrace_regex_open() function. If the trace_array is NULL, then it
just uses the ftrace_ops without the need to take its reference (like
normal). If the ftrace_ops is NULL, that is only the case for the top
level instance and the global_ops can be used.
This allows the trace_array to have its reference incremented before
touching the ftrace_ops that could also be freed when the instance is.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260828223901.29e26edb@robin
Fixes: 591dffdade9f0 ("ftrace: Allow for function tracing instance to filter functions")
Reported-by: Breno Leitao <leitao@debian.org>
Tested-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/all/apGORjltZgAiAYHT@gmail.com/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
There are two fields in struct acpi_device_pnp, device_name and
device_class, that were supposed to be populated and used by device
drivers, but they have never been used consistently and now they
are only set for the bus object in acpi_set_pnp_ids() (and never
read afterward).
Drop them along with all of the associated symbols except for
MAX_ACPI_CLASS_NAME_LEN and the acpi_device_class typedef that
are used by the ACPI netlink messaging code. Move those two
definitions closer to the struct acpi_bus_event that refers to
the acpi_device_class type.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/6314925.lOV4Wx5bFT@rafael.j.wysocki
|
|
Commit 51976c6cd786 ("RDMA/core: Provide rdma_user_mmap_disassociate()
to disassociate mmap pages") introduced disassociation_lock to protect
new mmap registrations against uverbs_user_mmap_disassociate(), but
created an ABBA deadlock:
Thread A (mmap / fork):
mmap_lock -> disassociation_lock
Thread B (disassociate):
disassociation_lock -> mmap_lock
Fix by removing disassociation_lock entirely and using the pre-existing
hw_destroy_rwsem instead. hw_destroy_rwsem already provides the same
protection: rdma_umap_open() and ib_uverbs_mmap() both use
down_read_trylock() before registering a new VMA, so holding hw_destroy_rwsem
in uverbs_user_mmap_disassociate() is sufficient to block new registrations.
trylock is used in both mmap paths (not blocking down_read) because
mmap_lock is already held on entry, and uverbs_user_mmap_disassociate()
acquires mmap_lock internally — a blocking read would recreate the same
deadlock.
The only caller that was not taking hw_destroy_rwsem for write was
rdma_user_mmap_disassociate(). Fix it to take the rwsem per-ufile while
iterating under lists_mutex. This is safe because ib_uverbs_close()
releases hw_destroy_rwsem entirely before acquiring lists_mutex, so the
two locks are never held simultaneously.
lockdep warning:
[ 776.654252] ======================================================
[ 776.655214] WARNING: possible circular locking dependency detected
[ 776.656167] 6.18.0for-upstream_debug_94e244d9ccab #1 Not tainted
[ 776.657114] ------------------------------------------------------
[ 776.658087] devlink/14824 is trying to acquire lock:
[ 776.658879] ffff88811170c800 (&mm->mmap_lock){++++}-{4:4}, at: uverbs_user_mmap_disassociate+0x168/0x780 [ib_uverbs]
[ 776.660479]
[ 776.660479] but task is already holding lock:
[ 776.661460] ffff888142d92b08 (&file->disassociation_lock){+.+.}-{4:4}, at: uverbs_user_mmap_disassociate+0x39/0x780 [ib_uverbs]
[ 776.663177]
[ 776.663177] which lock already depends on the new lock.
[ 776.663177]
[ 776.664525]
[ 776.664525] the existing dependency chain (in reverse order) is:
[ 776.665724]
[ 776.665724] -> #2 (&file->disassociation_lock){+.+.}-{4:4}:
[ 776.666887] __mutex_lock+0x16d/0x2330
[ 776.667633] rdma_umap_open+0x129/0x280 [ib_uverbs]
[ 776.668489] dup_mmap+0xa40/0x1790
[ 776.669170] copy_process+0x5dd2/0x6170
[ 776.669933] kernel_clone+0xb6/0x610
[ 776.670636] __do_sys_clone+0xb5/0xf0
[ 776.671354] do_syscall_64+0x70/0x12e0
[ 776.672083] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 776.672940]
[ 776.672940] -> #1 (&mm->mmap_lock/1){+.+.}-{4:4}:
[ 776.673985] down_write_nested+0x90/0x1e0
[ 776.674751] dup_mmap+0x201/0x1790
[ 776.675448] copy_process+0x5dd2/0x6170
[ 776.676180] kernel_clone+0xb6/0x610
[ 776.676904] __do_sys_clone+0xb5/0xf0
[ 776.677615] do_syscall_64+0x70/0x12e0
[ 776.678351] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 776.679239]
[ 776.679239] -> #0 (&mm->mmap_lock){++++}-{4:4}:
[ 776.680253] __lock_acquire+0x18c6/0x2ec0
[ 776.681018] lock_acquire+0x10e/0x2e0
[ 776.681742] down_read+0x95/0x430
[ 776.682395] uverbs_user_mmap_disassociate+0x168/0x780 [ib_uverbs]
[ 776.683436] uverbs_destroy_ufile_hw+0x1ae/0x270 [ib_uverbs]
[ 776.684416] ib_uverbs_remove_one+0x22b/0x420 [ib_uverbs]
[ 776.685371] remove_client_context+0xa6/0xf0 [ib_core]
[ 776.686342] disable_device+0x12b/0x240 [ib_core]
[ 776.687249] __ib_unregister_device+0x269/0x460 [ib_core]
[ 776.688233] ib_unregister_device+0x21/0x30 [ib_core]
[ 776.689140] mlx5r_remove+0xd0/0x170 [mlx5_ib]
[ 776.689999] device_release_driver_internal+0x3b2/0x560
[ 776.694876] bus_remove_device+0x1f5/0x3e0
[ 776.695638] device_del+0x3b9/0x990
[ 776.696329] mlx5_detach_device+0x17e/0x350 [mlx5_core]
[ 776.697429] mlx5_unload_one_devl_locked+0x3f/0xb0 [mlx5_core]
[ 776.698578] mlx5_devlink_reload_down+0x1f9/0x550 [mlx5_core]
[ 776.699712] devlink_reload+0x13e/0x680
[ 776.700456] devlink_nl_reload_doit+0xc29/0x1160
[ 776.701293] genl_family_rcv_msg_doit+0x1c9/0x2a0
[ 776.702135] genl_rcv_msg+0x3f0/0x6b0
[ 776.702854] netlink_rcv_skb+0x11d/0x370
[ 776.703605] genl_rcv+0x24/0x40
[ 776.704236] netlink_unicast+0x5b4/0x970
[ 776.704984] netlink_sendmsg+0x730/0xbf0
[ 776.705748] __sock_sendmsg+0xc5/0x190
[ 776.706461] __sys_sendto+0x201/0x2f0
[ 776.707188] __x64_sys_sendto+0xdc/0x1b0
[ 776.707931] do_syscall_64+0x70/0x12e0
[ 776.708643] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 776.709546]
[ 776.709546] other info that might help us debug this:
[ 776.709546]
[ 776.710910] Chain exists of:
[ 776.710910] &mm->mmap_lock --> &mm->mmap_lock/1 --> &file->disassociation_lock
[ 776.710910]
[ 776.712805] Possible unsafe locking scenario:
[ 776.712805]
[ 776.713828] CPU0 CPU1
[ 776.714589] ---- ----
[ 776.715347] lock(&file->disassociation_lock);
[ 776.716097] lock(&mm->mmap_lock/1);
[ 776.717067] lock(&file->disassociation_lock);
[ 776.718199] rlock(&mm->mmap_lock);
[ 776.718857]
[ 776.718857] *** DEADLOCK ***
Fixes: 51976c6cd786 ("RDMA/core: Provide rdma_user_mmap_disassociate() to disassociate mmap pages")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260811-fix-mmap-lockdep-v1-1-1151b41063b4@nvidia.com
Acked-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Let's start the 7.3 drm-misc-fixes cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull forgotten EDAC updates from Borislav Petkov:
"Somewhat belated (and forgotten :-\) EDAC updates lineup for v7.3:
- Mark the mpc85xx and ThunderX EDAC drivers as orphaned due to lack
of access to hardware
- Remove the unused fake error injection interface from the EDAC
debugfs code due to potential races between logging a fake and a
real hw error
- edac_mc_sysfs: Use sysfs_emit_at() for proper bounds checking
- Remove Mark Gross from maintainer entries and move him to CREDITS
- Load the AMD address translation library only on systems which can
actually make use of it (have ECC memory) instead of on every AMD
Zen system out there
- In edac_altera, detect the SoC variant using the ECC manager's
compatible string instead of the build architecture to select the
correct interrupt layout, and remove leftover architecture-specific
ifdeffery from the double-bit error handling path
- Add a new reviewer for the Xilinx EDAC drivers
- Unify address translation logic in Intel client EDAC drivers igen6
and ie31200 along with detecting memory controller counts at boot
time instead of relying on hardcoded, platform specific numbers.
Also, fix a bunch of issues in them; work by Qiuxu Zhuo
- Add support for a new Intel processor platform Starfire which is a
derivative of Panther Lake SoCs
- The usual cleanups and fixlets all over"
* tag 'edac_updates_for_v7.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (24 commits)
EDAC/thunderx: Orphan it
EDAC/device_sysfs: Cleanup around edac_device_ctl_poll_msec_store()
EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
EDAC/igen6: Add Intel Starfire SoCs support
EDAC/igen6: Refactor address translation logic
EDAC/igen6: Remove redundant resource configuration tables
EDAC/igen6: Detect present memory controllers at runtime
EDAC/igen6: Simplify compute die ID comments
EDAC/igen6: Remove unnecessary XOR on the zero-valued interleave bit
EDAC/igen6: Fix Raptor Lake-P logged error address
EDAC/igen6: Fix channel address decode for non-hash mode
EDAC/igen6: Fix channel selection hash
EDAC/igen6: Fix interleave boundary condition
EDAC/ie31200: Decouple DIMM width decoding from enum order
RAS/AMD/ATL: Remove conditional return with no effect
EDAC: Remove redundant dev_err()
MAINTAINERS: Add Radhey Shyam Pandey as Xilinx EDAC reviewer
EDAC/altera: Remove remaining CONFIG_64BIT ifdefs in the DB-error path
EDAC/altera: Use ECC manager compatible to select A10/S10 IRQ layout
RAS/AMD/ATL, EDAC/amd64: Only load ATL when needed
...
|
|
pmc->sflist is read locklessly under rcu_read_lock() by
inet6_mc_check() during packet reception in the UDP and RAW
multicast receive paths.
ip6_mc_source() mutated psl->sl_addr and psl->sl_count in-place
when adding or removing a source filter. Additionally, when expanding
the filter buffer, newpsl was published via rcu_assign_pointer()
before writing the new source into the array.
Because 16-byte struct in6_addr writes are not atomic and array
shifting is not synchronized with RCU readers, concurrent readers in
inet6_mc_check() could read torn IPv6 addresses or observe
duplicated/missed source entries.
Fix this by switching ip6_mc_source() to copy-on-write RCU updates:
allocate and fully populate newpsl before publishing it via
rcu_assign_pointer(), and reclaim the old filter via kfree_rcu(),
matching ip6_mc_msfilter().
Also remove the now unused IP6_SFBLOCK macro.
Fixes: 882ba1f73c06 ("mld: convert ipv6_mc_socklist->sflist to RCU")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260828084531.1826790-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 23d2b94043ca ("igmp: Add ip_mc_list lock in ip_check_mc_rcu")
added spin_lock_bh(&im->lock) to ip_check_mc_rcu() to prevent a
use-after-free while iterating im->sources during concurrent deletions.
However, ip_check_mc_rcu() is called from RCU read-side critical
sections in packet receive and route lookup fast paths (e.g.
__mkroute_output(), ip_route_input_rcu(), and __udp4_lib_rcv()).
When igmpv3_send_cr() or igmpv3_send_report() holds &pmc->lock and
calls add_grec() -> igmpv3_newpack() -> ip_route_output_ports(),
an XFRM policy matching a multicast destination triggers
xfrm_tmpl_resolve_one() -> xfrm4_get_saddr() -> __mkroute_output() ->
ip_check_mc_rcu(). This attempts to acquire &im->lock while &pmc->lock
is already held on the same CPU, triggering a lockdep recursive locking
warning / deadlock.
Fix this by converting IPv4 struct ip_sf_list to RCU, mirroring the
IPv6 implementation in net/ipv6/mcast.c:
1. Add struct rcu_head to struct ip_sf_list and annotate sf_next,
sources, and tomb as __rcu pointers.
2. Use rcu_assign_pointer() and kfree_rcu() for list updates and
deletions.
3. Remove spin_lock_bh(&im->lock) from ip_check_mc_rcu() and traverse
im->sources locklessly with for_each_psf_rcu(), reading and writing
counter fields with READ_ONCE() and WRITE_ONCE().
Note: RCU conversion of /proc/net/mcfilter will be done in a
separate patch.
Fixes: 23d2b94043ca ("igmp: Add ip_mc_list lock in ip_check_mc_rcu")
Reported-by: syzbot+3d99fb01bcd740f2fc1e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3d99fb01bcd740f2fc1e
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260827160656.903003-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
virtio_transport_recv_pkt() looks up sockets first by the full source and
destination tuple, then by destination only in the bound table. The
fallback is needed for listening and connecting sockets, but sockets remain
in the bound table after connect(), so it can also return a non-listening
socket.
The fallback does not validate the source address. In TCP_SYN_SENT, a
RESPONSE from an unrelated source can transition the victim socket to
TCP_ESTABLISHED while its stored remote address remains unchanged.
Subsequent RW packets from that source are delivered through the same
destination-only fallback.
This was reproduced with capability-empty processes under different UIDs.
The attacker discovered the target tuple through unprivileged AF_VSOCK
sock_diag and caused the victim socket to read 16 attacker-chosen bytes;
the intended peer-side socket read 0 of those 16 bytes.
Add vsock_check_source() to validate the transport, source port and source
CID against the peer stored in a non-listening socket. The local transport
is the CID exception because its packets are generated internally with
VMADDR_CID_LOCAL as their source, including connections using CID aliases.
Use the helper after lock_sock() in the virtio receive path.
Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Closes: https://lore.kernel.org/netdev/20260813121236.2328599-1-4ncienth@gmail.com/
Cc: stable@vger.kernel.org
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Signed-off-by: Daehyeon Ko <4ncienth@gmail.com>
Link: https://patch.msgid.link/20260826003929.966160-2-4ncienth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0x750 [ttm]
[10109.861203] ? ttm_bo_alloc_resource+0xa9/0x750 [ttm]
[10109.861208] ? lock_acquire+0xc4/0x2d0
[10109.861214] ttm_bo_validate+0x94/0x1c0 [ttm]
[10109.861218] ? ww_mutex_trylock+0x19d/0x3d0
[10109.861219] ? _raw_write_unlock+0x22/0x50
[10109.861223] ttm_bo_init_reserved+0x17d/0x1f0 [ttm]
[10109.861228] xe_bo_init_locked+0x20a/0x620 [xe]
[10109.861294] ? __pfx_xe_ttm_bo_destroy+0x10/0x10 [xe]
[10109.861359] ? mark_held_locks+0x46/0x90
[10109.861361] ? __create_object+0x68/0xc0
[10109.861366] __xe_bo_create_locked+0x384/0xa20 [xe]
[10109.861432] ? lock_acquire+0xc4/0x2d0
[10109.861434] ? xe_drm_pagemap_populate_mm+0xd3/0x340 [xe]
[10109.861542] xe_bo_create_locked+0x23/0x40 [xe]
[10109.861609] xe_drm_pagemap_populate_mm+0x12e/0x340 [xe]
[10109.861707] ? __lock_acquire+0x43e/0x2930
[10109.861716] drm_pagemap_populate_mm+0x74/0xe0 [drm_gpusvm_helper]
[10109.861720] xe_svm_alloc_vram+0xb5/0x2c0 [xe]
[10109.861817] ? seqcount_lockdep_reader_access.constprop.0+0x9f/0xc0
[10109.861819] ? ktime_get+0x23/0x130
[10109.861821] ? trace_hardirqs_on+0x22/0xe0
[10109.861823] ? seqcount_lockdep_reader_access.constprop.0+0x9f/0xc0
[10109.861826] __xe_svm_handle_pagefault+0x77d/0xbf0 [xe]
[10109.861924] ? rwsem_down_write_slowpath+0x43a/0x9a0
[10109.861926] ? _raw_spin_unlock_irq+0x27/0x70
[10109.861928] ? rwsem_down_write_slowpath+0x43a/0x9a0
[10109.861929] ? trace_hardirqs_on+0x22/0xe0
[10109.861931] ? _raw_spin_unlock_irq+0x27/0x70
[10109.861933] ? rwsem_down_write_slowpath+0x459/0x9a0
[10109.861937] xe_svm_handle_pagefault+0x3d/0xb0 [xe]
[10109.862030] xe_pagefault_queue_work+0x1a9/0x520 [xe]
[10109.862122] process_one_work+0x239/0x730
[10109.862127] worker_thread+0x200/0x3f0
[10109.862130] ? __pfx_worker_thread+0x10/0x10
[10109.862132] kthread+0x10d/0x150
[10109.862133] ? __pfx_kthread+0x10/0x10
[10109.862135] ret_from_fork+0x3bd/0x470
[10109.862138] ? __pfx_kthread+0x10/0x10
[10109.862140] ret_from_fork_asm+0x1a/0x30
[10109.862146] </TASK>
Fixes: 99624bdff867 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Assisted-by: Claude:claude-opus-4-8
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Arvind Yadav <arvind.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260810092845.2776097-1-arvind.yadav@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- After cgroup.kill was written to a cgroup, every child cloned into it
with CLONE_INTO_CGROUP was spuriously killed because the fork path
snapshotted the kill counter before resolving the target cgroup
- Releasing an isolated cpuset partition dropped the isolation of CPUs
isolated on the kernel command line
- Selftest and documentation fixes
* tag 'cgroup-for-7.3-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
selftests/cgroup: test clone3() into a previously killed cgroup
cgroup: fix spurious SIGKILL of CLONE_INTO_CGROUP children
selftests/cgroup: Add test for preserving boot-isolated CPUs
cgroup/cpuset: Preserve boot-isolated CPUs on partition release
selftests/cgroup: Drop invalid boot isolation comparison
docs: cgroup-v2: fix misc.events key format description
selftests/cgroup: Fix cg_run_in_subcgroups ignoring arg parameter
selftests/cgroup: set the test plan after the setup checks
|
|
Pull xfs fixes from Carlos Maiolino:
"This contains a few fixes for the zoned storage support, a possible
deadlock vector fix, some code refactoring patches and a quota evasion
fix on XFS while exporting it via NFS.
Please note that for the quota evasion fix, a couple patches for the
capability subsystem are included in the pull request. Those have been
ack'ed by the respective maintainer which also agreed to have them
going through the xfs tree.
This also includes a patch for the quota subsystem to stop issuing
audit messages during quota enforcing. Quota maintainer also ack'ed
and agreed with this going through xfs tree"
* tag 'xfs-fixes-7.3-rc2' of gitolite.kernel.org:/pub/scm/fs/xfs/xfs-linux:
capability: unexport has_capability_noaudit
xfs: replace ns_capable_noaudit
quota: Don't issue audit messages on quota enforcing
capability: Add new capable_noaudit
xfs: fix capability check in xfs
xfs: restore bi_bdev in xfs_zone_gc_write_chunk
xfs: split ioend handling into a separate source file
xfs: factor out a xfs_iomap_set_anon_write helper
xfs: fix zoned write iomap flags assignments
xfs: fix racy open zone caching
xfs: handle NULL open_zone for merged ioends in xfs_ioend_put_open_zones
xfs: use inode_init_always_gfp with __GFP_NOFAIL in xfs_inode_alloc
xfs: remove kmem_to_page()
xfs: don't flush and invalidate internal RT device twice in xfs_shutdown_devices
xfs: split an assert in xfs_trans_log_buf
xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf
|
|
Since commit b69bb476dee9 ("cgroup: fix race between fork and
cgroup.kill"), the fork path snapshots the kill_seq of the child's
future cgroup into kargs->kill_seq, and cgroup_post_fork() SIGKILLs
the child if that cgroup's kill_seq has changed in the meantime, to
catch forks racing with a cgroup.kill sweep.
For CLONE_INTO_CGROUP, however, the snapshot in cgroup_css_set_fork()
is taken before the target cgroup has been resolved: kargs->cgrp is
always NULL at this point (it is only set at the end of the function).
So the "if (kargs->cgrp)" branch is dead code and the snapshot always
records the kill_seq of the parent's cgroup. cgroup_post_fork() then
compares it with the kill_seq of the target cgroup, so the child gets
SIGKILLed whenever the two cgroups have been killed a different number
of times.
As a result, once cgroup.kill has been written to a cgroup, every
child subsequently cloned into it with clone3(CLONE_INTO_CGROUP) is
killed on the spot, for as long as the cgroup exists: kill_seq is not
exposed to userspace and never resets.
Re-snapshot kill_seq from the target cgroup once it has been resolved,
and drop the dead branch at the early snapshot site.
This does not reopen the race fixed by b69bb476dee9. For
CLONE_INTO_CGROUP, everything from the snapshot to the check in
cgroup_post_fork() runs with cgroup_mutex held, and kill_seq is
only ever incremented under cgroup_mutex.
tj: Updated the comment above kill_seq to reflect the new serialization
rules as suggested by Shakeel Butt.
Fixes: b69bb476dee9 ("cgroup: fix race between fork and cgroup.kill")
Cc: stable@vger.kernel.org
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Assisted-by: LLM
Signed-off-by: Etienne Perot <eperot@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
ap_device_id::driver_info is not used in the kernel. The structure is
also not part of API/ABI, so the unused member can just be dropped.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Updating drm-misc-fixes to the state of v7.2.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
- drop Excess description of @lock from kernel-doc
- add missing function/macro short descriptions
WARNING: include/linux/dma-fence-array.h:47 Excess struct member 'lock' description in 'dma_fence_array'
WARNING: include/linux/dma-fence-chain.h:48 Excess struct member 'lock' description in 'dma_fence_chain'
Warning: include/linux/dma-fence-chain.h:82 missing initial short description on line:
* dma_fence_chain_alloc
Warning: include/linux/dma-fence-chain.h:94 missing initial short description on line:
* dma_fence_chain_free
Fixes: 5943243914b9 ("dma-buf: use inline lock for the dma-fence-array")
Fixes: a408c0ca0c41 ("dma-buf: use inline lock for the dma-fence-chain")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260831031956.3410813-1-rdunlap@infradead.org
|
|
cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid()
reads it and passes it to pid_vnr() without protecting the lifetime of
the referenced struct pid. A concurrent writer can replace cad_pid and
drop the final reference to the old struct pid after the reader has
loaded the pointer but before pid_vnr() has finished dereferencing it,
causing a use-after-free.
kill_cad_pid() has the same lifetime race when it passes cad_pid to
kill_pid().
At the time this issue was reported, an unprivileged user could reach the
sysctl through user and PID namespaces because cad_pid was registered in
pid_table[]. Moving cad_pid back to the global reboot sysctl table
corrected that namespace and permission mismatch, but did not fix the
underlying lifetime race.
Fix this by treating cad_pid as an RCU-protected pointer at both read
sites and by waiting for a grace period before dropping the old reference
on the write side.
call_rcu(&old_pid->rcu, ...) cannot be used here because free_pid()
also queues pid->rcu; queueing the same rcu_head twice can corrupt the
RCU callback list.
Original KASAN crash stack:
kernel/pid.c:545 pid_nr_ns() # reads freed pid->level
kernel/pid.c:556 pid_vnr() # calls pid_nr_ns()
kernel/pid.c:775 proc_do_cad_pid() # calls pid_vnr(cad_pid)
Fixes: 9ec52099e4b8 ("[PATCH] replace cad_pid by a struct pid")
Reported-by: AutonomousCodeSecurity@microsoft.com
Closes: https://lore.kernel.org/all/20260717210143.4734-1-blbllhy@gmail.com/
Link: https://lore.kernel.org/all/alz5ZYLE4kaq_v2P@redhat.com/
Link: https://lore.kernel.org/all/al4ICz9biJKtdZc4@redhat.com/
Suggested-by: Mateusz Guzik <mjguzik@gmail.com>
Suggested-by: Bradley Morgan <include@grrlz.net>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Suggested-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: stable@vger.kernel.org
Signed-off-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Link: https://patch.msgid.link/20260814040944.16561-1-blbllhy@gmail.com
Reviewed-by: Bradley Morgan <include@grrlz.net>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Currently, trace_cachefiles_coherency() is being passed a pointer to a
__be64 lain over the coherency data in struct cachefiles_xattr so that it
can display the first 8 bytes. However, the data is of variable length and
could even be 0 bytes. This could lead to a UAF or KASAN warning.
Fix this by making sure the buffer has room for at least 8 bytes and that
those 8 bytes are pre-cleared.
Further, those bytes are not 8-byte aligned, so fix the tracepoint to
extract the data as four 2-byte words (they are 2-byte aligned) and
reassemble the __be64. The compiler will convert this into a single 8-byte
load where the CPU supports it.
Fixes: 229105e5cfd9 ("cachefiles: Add auxiliary data trace")
Link: https://sashiko.dev/#/patchset/20260810144746.574036-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260827134304.2075713-11-dhowells@redhat.com
Acked-by: Paulo Alcantara <pc@manguebit.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
For really big read RPC ops that span multiple folios, netfslib allows the
filesystem to give progress notifications to wake up the collector thread
to do a collection of folios that have now been fetched, even if the RPC is
still ongoing, thereby allowing the application to make progress.
This works by taking the current rreq->cleaned_to value (which indicates
which folios have been unlocked) and adding the stashed size of the next
folio to it. cleaned_to, however, is subject to 64-bit tearing on a 32-bit
arch.
Fix this by stashing the next progress notification point as a size_t
(which won't tear) to be added to rreq->start (which won't change), with
the collector thread calculating that from cleaned_to plus the next folio
size.
Further, however, if the folios are small, the collector thread gets
constantly woken up - which has a negative performance impact on the
system.
Fix that too by setting a minimum trigger of 256KiB or the size of the
folio at the front of the queue, whichever is larger. Note that this has
an issue that different subreqs have different need-to-be-cached
properties; this is solved by a preceding patch that marks the property on
the folios whilst issuing subreqs rather than when collecting them.
Also, make sure rreq->cleaned_to is initialised up front, along with
rreq->collected_to and stream->collected_to.
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Link: https://sashiko.dev/#/patchset/20260804100224.2748935-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260827134304.2075713-10-dhowells@redhat.com
Acked-by: Paulo Alcantara <pc@manguebit.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Mark folios with NETFS_FOLIO_COPY_TO_CACHE whilst issuing subreqs rather than
when collecting them. This means that the collector thread doesn't have to
try and keep track of which subreqs contribute to which folios - and thus
which folios will need to be copied to the cache because at least one byte
wasn't in the cache. Instead, this is marked on the folios up front and the
collector need only consider the folios.
For PG_private_2-using filesystems, PG_private_2 is set instead of
NETFS_FOLIO_COPY_TO_CACHE, but otherwise it works the same.
The NETFS_RREQ_COPY_TO_CACHE is replaced with NETFS_RREQ_CANCEL_CACHING, which
is now set if caching fails somewhere, thereby causing the collection thread
to cancel the copy-to-cache marks on the remaining folios.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260827134304.2075713-9-dhowells@redhat.com
Acked-by: Paulo Alcantara <pc@manguebit.org>
cc: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
There are some synchronisation issues that derive from the app thread
adding more folios to the rolling buffer whilst the collector thread is
looking at them or trying to clear them, such as determining the setting of
front_folio_order when the next folio hasn't been added yet,
The reason for the rolling buffer approach is that loading the buffer
upfront and then dropping all the refs just acquired is quite a slow
operation, and loading progressively allows some of the cost to be deferred
until after at least some of the I/O is started.
Instead, a better way is to load all the folios into the rolling buffer
upfront - and then drop the refs later, once the I/O is in progress. (Even
better would be for the refs not to be there at all.)
Fix this by changing the rolling buffer loader to load all the folios
selected by the VM for readahead upfront into the folio queue. The folio
queue is allocated a batch worth at a time as we don't know how many folios
are involved (the readahead_control struct, alas, has a page count, not a
folio count).
The folio refs acquired from readahead are then dropped in bulk once the
first subrequest is dispatched as it's quite a slow operation. The
collector waits for NETFS_RREQ_NEED_PUT_RA_REFS to be cleared so that it
doesn't unlock folios before the xarray has been scanned for them.
This simplifies the buffer handling later and isn't noticeably slower as
the xarray doesn't need to be modified and the folios are all already
pre-locked.
Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading")
Link: https://sashiko.dev/#/patchset/20260824120224.504575-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260827134304.2075713-8-dhowells@redhat.com
Acked-by: Paulo Alcantara <pc@manguebit.org>
cc: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
raw_v4_match() reads inet_daddr, inet_rcv_saddr and
sk_bound_dev_if locklessly under RCU. Bind and connect writers are
annotated, but __udp_disconnect() still clears the same fields using
plain stores.
Commit 18f116931f52e ("raw: annotate lockless match fields in
raw_v4_match()") added the lockless readers and annotated the raw bind
and datagram connect writers. Its v4 revision intentionally left the
shared disconnect-side IPv4 writers for follow-up cleanup.
Complete that follow-up by using WRITE_ONCE() for the disconnect-side
stores, including the inet_rcv_saddr reset in inet_reset_saddr(), to
pair with the lockless raw socket matcher.
Fixes: 0daf07e52709 ("raw: convert raw sockets to RCU")
Link: https://lore.kernel.org/netdev/20260716142958.3064224-1-runyu.xiao@seu.edu.cn/
Suggested-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260828012918.1461-1-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It turns out the previous usage of hardirq_disable_count() in
__irq_exit_rcu() would cause softirq pending issues. Without that usage,
hardirq_disable_count() doesn't need to exist, so remove it.
Also move hardirq_disable_enter/exit() into the Rust specific interrupt_rc
header.
[ tglx: Move the helpers over ]
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260827194835.38968-1-boqun@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
- Revert a commit to spinlock cleanup guards that got caught up
in the subtle limitations & fragility of guards (again...) and
caused a regression (Peter Zijlstra)
* tag 'locking-urgent-2026-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Revert switching guards to _irq_{disable,enable}()
|
|
Currently a softirq may be pending longer then expected if the
triggering interrupt happens in-between hardirq_disable_enter() and
_local_interrupt_disable() in local_interrupt_disable():
local_interrupt_disable():
hardirq_disable_enter();
<interrupt>
...
__irq_exit_rcu():
// false because hardirq_disable_count() is not 0
if (.. && !hardirq_disable_count() && ..) {
invoke_softirq();
}
_local_interrupt_disable();
, it'll defer the softirq to the next interrupt which can be forever.
The order between hardirq_disable_enter() and _local_interrupt_disable()
is to optimize re-disabling interrupts if they are already disabled, but
as 1) local_interrupt_disable() is not widely used yet and 2) the proper
way to achieve this optimization may need fixing up the counter at
entry/exit time [1], so reverse the order for now to avoid the softirq
pending issue.
Because of this fix, the part of saving the current state is separated
from irq disabling, and the logic of local_interrupt_disable() becomes:
local_irq_save(flags);
if (counter++ == 0) {
this_cpu(local_interrupt_disable_state) = flags;
}
Therefore change the helper function _local_interrupt_disable() to
_local_interrupt_save_state() which only saves the current irqflags
(when interrupts get disabled the first time).
Fixes: e901c1510e24 ("irq,spin_lock: Add counted interrupt disabling/enabling")
Reported-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Bradley Morgan <brads@mainlining.org>
Link: https://patch.msgid.link/20260829213412.14303-1-boqun@kernel.org
Link: https://lore.kernel.org/lkml/87v78wezid.ffs@fw13/ [1]
Closes: https://lore.kernel.org/lkml/87jypbfu1t.ffs@fw13/
|
|
Pull more SCSI updates from Martin Petersen:
"Remaining updates for the 7.3 merge window. The only core change is
enabling context analysis for the SCSI layer and UFS.
The remaining changes are either bug fixes or hardening"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi: (26 commits)
scsi: snic: Fix SCSI host leak on workqueue allocation failure
scsi: MAINTAINERS: Update my email address
scsi: MAINTAINERS: Leave the cumana_1 and oak drivers to the RISCPC maintainers
scsi: leapraid: Standardize NCQ priority sysfs attributes
scsi: leapraid: Serialize firmware log mmap with teardown
scsi: leapraid: Balance host references for firmware log VMAs
scsi: lpfc: Remove unnnecessary NULL check
scsi: qla2xxx: Fix an loop timeout test
scsi: qla2xxx: Fix an error code in qla_get_tmf()
scsi: ibmvfc: Fix use of uninitialized rport in ibmvfc_do_work()
scsi: core: Enable context analysis for hosts.o
scsi: lpfc: Replace strlcat() with sysfs_emit_at() in the sysfs show functions
scsi: lpfc: Replace strlcat() with seq_buf in the debugfs dump helpers
scsi: lpfc: Replace strlcat() with seq_buf in lpfc_rx_monitor_report()
scsi: lpfc: Replace strlcat() with scnprintf() in lpfc_vport_symbolic_node_name()
scsi: lpfc: Replace strlcat() with seq_buf in lpfc_info()
scsi: core: Enable context analysis
scsi: core: Protect host state changes with the host lock
scsi: core: Add lock context annotations
scsi: core: Pass the SCSI host pointer directly to scanning functions
...
|
|
Pull more drm updates from Dave Airlie:
"As mentioned last week, an msm pull request fell down the side of the
couch or whatever the email equivalent of that is. This has the msm
next stuff + the usual fixes for amd/intel.
core:
- use drm_warn instead of warn
msm:
- Bindings:
- Added Shikra support
- Document a840, a704, a722
- Core:
- Use drm_client buffers for fbdev emulation
- teardown fixes
- ARM32 DMA fixup
- Remove objects from evict list when re-validated
- Bunch of corner case and error path fixes
- DPU:
- Dropped dev_pm_opp_set_rate(0) preventing burnout
- Fixed SSPP offsets of Kaanapali
- DP:
- Dropped dev_pm_opp_set_rate(0) preventing burnout
- Cleaned up core code in preparation for MST support
- Fixed prepare() to let Pipewire continue in case of the unplugged cable
- GPU:
- Add support for a704
- Add support for a722
- HDMI:
- Simplifed register access
amdgpu:
- eGPU fixes
- Runtime PM fix
- UserQ fixes
- Backlight fix
- Discovery sysfs fix
- Reset handling fixes
- Buffer func handling fix for xgmi
- VCN boundary check fix
- DC lut handling fixes
- MES fixes
- UVD fix
- VCE 3 fix
- Enforce isolation fix
- HPD fix for VGA/LVDS
- DML fix
- DCN 6 fixes
- DC gpu reset fix
amdkfd:
- Fix return value
- CU occupancy for GFX 11
- CU occupancy for GFX 12/12.1
- Queue bounds checking fix
- SVM fixes
- CRIU bounds checking fix
radeon:
- iMac display fix
xe:
- error message cleanups
- i2c global register definitions as dependency for xe/i2c fixes
- Media workardound
- Add CCS to gt_idle debugfs print
- Page fault related fix
- i2c related fixes
- System Controller mailbox bit fix"
* tag 'drm-next-2026-08-29' of https://gitlab.freedesktop.org/drm/kernel: (121 commits)
drm/xe/sysctrl: Read mailbox phase bit from hardware
drm/xe/i2c: Keep the i2c controller always enabled
drm/xe/i2c: Fix the interrupt handling
i2c: designware: Global register definitions
drm/xe: Reject page faults from non-fault-mode scratch VMs
drm/xe/xe_gt_idle: Add CCS to the powergating info print
drm/xe: Do not apply WA 14025883347 to media 3503
drm/amd/display: fix dc_lock leak on GPU reset error paths
drm/amd/display: Fix redundant GPUVMEnable checks in dcn6 flip schedule
drm/amd/display: Fix wrong bytes-per-pixel value for dml2_422_packed_10
drm/amdkfd: guard against NULL restore_mqd in CRIU queue restore
drm/amdgpu/userq: fix lock missing for userq fence error set
drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram
drm/amdkfd: Fix error path at svm_migrate_copy_to_ram
drm/amd/display: Log details when failing to register HPD IRQ
drm/amd/display: Fix HPD consideration for VGA/LVDS connectors on DCE
drm/amdgpu: clamp the isolation index for rings outside a partition
drm/amdkfd: Reject zero-sized AQL queue allocations after size halving
drm/amdgpu: Fix VCE 3 ring align_mask
drm/kfd: Add CU occupancy support to GFX12.1
...
|
|
Syzbot reported a crash in qdisc_pkt_len_segs_init() caused by a stale
transport_header offset after tunnel decapsulation.
BUG: unable to handle page fault for address: ffffed102091a42e
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 340 Comm: qdisc_uaf_repro Not tainted 7.2.0-rc4-00061-g248951ddc14d #256 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__asan_load2
<IRQ>
qdisc_pkt_len_segs_init (net/core/dev.c:4145)
__dev_queue_xmit (net/core/dev.c:4787)
br_dev_queue_push_xmit (net/bridge/br_forward.c:53)
br_handle_frame_finish (net/bridge/br_input.c:229)
br_handle_frame (net/bridge/br_input.c:315)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6099)
__netif_receive_skb_list_core (net/core/dev.c:6287)
netif_receive_skb_list_internal (net/core/dev.c:6445)
napi_complete_done (net/core/dev.c:6813)
gro_cell_poll (net/core/gro_cells.c:74)
__napi_poll (net/core/dev.c:7735)
net_rx_action (net/core/dev.c:7798 net/core/dev.c:7955)
handle_softirqs (kernel/softirq.c:622)
do_softirq (kernel/softirq.c:523 kernel/softirq.c:510 )
__local_bh_enable_ip (kernel/softirq.c:450)
tun_get_user (drivers/net/tun.c:1986 (discriminator 1))
tun_chr_write_iter (drivers/net/tun.c:2032)
The issue is completely latent until qdisc read transport header in
commit 7fb4c1967011 ("net: pull headers in qdisc_pkt_len_segs_init()").
The crash requires four conditions to line up:
1. The incoming packet is encapsulated and carries GSO metadata. The outer
transport header offset is stored in skb->transport_header while the
packet is still in the outer tunnel context.
2. The tunnel receiver strips the outer headers. skb->data is advanced to
the inner frame, but skb->transport_header is left pointing to the
now-removed outer L4 header, so it becomes a negative offset relative to
the new data.
3. The inner frame is not delivered to the local IP stack. Instead, it
is forwarded at L2 by a bridge or HSR, so ip_rcv_core() never runs and
the transport header is not reset to the inner L4 offset.
4. The forwarding path calls __dev_queue_xmit(), which enters
qdisc_pkt_len_segs_init(). That function computes the GSO header length
from skb_transport_offset(skb). Because the offset is negative, the
unsigned cast overflows and pskb_may_pull(skb, hdr_len +
sizeof(struct tcphdr)) reads past the end of the skb, triggering a
KASAN fault or page fault.
The issue specifically requires GSO packets (shinfo->gso_size != 0), which
are processed/aggregated through gro_cells. Fix this by clearing
transport_header to the ~0U sentinel in gro_cell for all tunnnel driver.
GTP does not support GRO/GSO, drop the evil GSO packets in GTP directly.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+83181a31faf9455499c5@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69de2bee.a00a0220.475f0.0041.GAE@google.com/T/
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260825123909.1463121-1-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_send_active_reset() can be called from contexts where gfp_any()
(in tcp_disconnect()) or sk->sk_allocation (in __tcp_close() and
mptcp_do_fastclose()) evaluates to GFP_KERNEL, which includes
__GFP_FS and __GFP_DIRECT_RECLAIM.
Allocating with GFP_KERNEL while holding the socket lock (sk_lock) creates
a lockdep dependency:
sk_lock -> fs_reclaim
This causes false-positive lockdep circular locking warnings with storage
subsystems (such as nvme-tcp) that acquire socket locks in block I/O paths
and invoke tcp_disconnect() or close sockets upon teardown:
set->srcu -> sk_lock -> fs_reclaim -> elevator_lock -> set->srcu
Active resets are small RST packet headers that should never
enter direct reclaim or block while holding socket locks.
Use sk_gfp_mask(sk, GFP_ATOMIC | __GFP_NOWARN) inside tcp_send_active_reset()
and remove its priority argument. This preserves __GFP_MEMALLOC access
for SOCK_MEMALLOC sockets, suppresses allocation failure warnings,
and aligns with other control packet allocations (e.g. tcp_send_fin(),
__tcp_send_ack(), tcp_xmit_probe_skb()).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260827095936.551524-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported a WARNING triggered by DEBUG_NET_WARN_ON_ONCE():
WARNING: at skb_transport_header include/linux/skbuff.h:3087 [inline]
WARNING: at udp_hdr include/linux/udp.h:23 [inline]
WARNING: at do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline]
WARNING: at trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11
Call trace:
skb_transport_header include/linux/skbuff.h:3087 [inline]
udp_hdr include/linux/udp.h:23 [inline]
do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline]
trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11
__traceiter_icmp_send include/trace/events/icmp.h:11 [inline]
__do_trace_icmp_send include/trace/events/icmp.h:11 [inline]
trace_icmp_send+0x320/0x49c include/trace/events/icmp.h:11
__icmp_send+0xcfc/0x11d8 net/ipv4/icmp.c:1013
ipv4_send_dest_unreach net/ipv4/route.c:1280 [inline]
ipv4_link_failure+0x57c/0x8dc net/ipv4/route.c:1287
dst_link_failure include/net/dst.h:438 [inline]
vti_tunnel_xmit+0xe40/0x17a4 net/ipv4/ip_vti.c:307
TP_fast_assign() unconditionally calls udp_hdr(skb) before checking
whether the packet is UDP. Furthermore, __icmp_send() can be invoked
from paths (e.g., link failures, ARP errors, forwarding, AF_PACKET)
where skb->transport_header was never initialized (~0U).
Under CONFIG_DEBUG_NET=y, calling skb_transport_header(skb) triggers
DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)).
Fix this by:
1. Only parsing transport info when iph->protocol == IPPROTO_UDP.
2. Using skb_header_pointer() at skb_network_offset(skb) + (iph->ihl << 2)
to safely fetch the UDP header without assuming transport_header is set.
Fixes: db3efdcf70c7 ("net/ipv4: add tracepoint for icmp_send")
Reported-by: syzbot+6d2762674103618994b0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a8d5538.91706f20.ef82.0009.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260825084551.1562967-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull ceph updates from Ilya Dryomov:
"A wide variety of mostly CephFS fixes and cleanups, split between
changes that address edge cases (Sam, Xiubo, Matthew), efficiency
improvements (Max) and AI-assisted hardening (Michael, Jeremy).
One thing that stands out is Alex's change to how CephFS behaves in
NEARFULL scenarios: the long-standing "make all writes synchronous"
behavior has become opt-in. It was always somewhat controversial and
doesn't make much sense for modern deployments; the new default is to
continue normal operation (i.e. buffer writes as MDS allows, etc). The
behavior in case the cluster reaches any FULL state remains the same
as before"
* tag 'ceph-for-7.3-rc1' of https://github.com/ceph/ceph-client: (32 commits)
ceph: force a cap message when a deferred revoke can't be acked immediately
libceph: reject buckets with mismatched CRUSH ids
ceph: reject export_targets ranks >= CEPH_MAX_MDS in mdsmap decode
ceph: fix leaked inode reference on writeback abort at umount
libceph: remove ceph_put_page_vector()
libceph: validate banner payload length
ceph: make nearfull sync writes opt-in
ceph: do not repeat ceph_trim_dentries() if no progress possible
ceph: drop mdsc->mutex before decoding the MDS reply
ceph: fix UAF in check_new_map() on session freed during unlock
ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock
ceph: pass inode pointer around instead of reloading it
ceph: mark cap remove with RB_CLEAR_NODE() instead of setting ci=NULL
ceph: add helper function ceph_cap_is_removed()
ceph: make __ceph_remove_cap() static
ceph: cap delegated inode count in ceph_parse_deleg_inos()
ceph: bound num_export_targets array for mds info v2/v3
ceph: bound MDSCapAuth path and fs_name decode in handle_session()
ceph: bound xattr value length in __build_xattrs()
ceph: bound copied dentry name length in NFS export get_name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Support for a per-device wear-leveling threshold
- Various fixes and cleanups of error paths
- Correctly preserve torture flag up wear-leveling
UBIFS:
- Various fixes and cleanups of error paths and kernel-doc"
* tag 'ubifs-for-linus-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
UBI: support per-device wear-leveling threshold
UBI: fix two issues in the ubi.mtd MODULE_PARM_DESC
mtd: ubi: Release device reference on busy detach
ubi: Fix rollback for explicit UBI device numbers
ubifs: fix out-of-bounds read in signature length check
UBI: fastmap: Pass to_be_tortured when reusing old fastmap PEBs
UBI: Preserve torture flag when rescheduling failed erasures
ubifs: ubifs.h: clean up kernel-doc comments
ubifs: key.h: use correct function parameter name
ubifs: debug.h: fix kernel-doc struct prototypes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, key enhancements focus on reducing inode management
memory overhead, introducing resizable tail sections with unified
pinned allocation, and boosting I/O throughput via parallel
multi-device flushes and asynchronous f2fs_write_end_io() execution.
We also add dynamic device alias reservations to allow on-the-fly
space donation from user partitions.
Alongside these features, critical bug fixes resolve folio race
conditions, lingering dirty flags, dentry and block counter leaks, and
potential deadloops in f2fs_fsync_node_pages(). Additional stability
patches address error-path handling across symlink, sync, and
rename/unlink operations, prevent pinned file fragmentation, and
correct segment migration and free section accounting in
free_segment_range.
Enhancements:
- reduce memory footprint of ino management
- support dynamic reserve/release for device aliasing
- issue multi-device flushes in parallel
- add a way to run f2fs_write_end_io() asynchronously
- support resizable tail section and unify pinned allocation
Bug fixes:
- fix to pass folio->index to f2fs_sanity_check_node_footer()
- fix folio_nr_pages() race after put in large folio invalidate
- fix to clear dirty flag on folio in error path
- accurately adjust free_sections during free_segment_range
- fix to avoid potential deadloop in f2fs_fsync_node_pages()
- fix the error path in symlink, device alias in rename/unlink,
f2fs_sync_fs
- fix to migrate all curseg types during free_segment_range
- fix to avoid pinfile fragment on fragment:{block, segment} mode
- fix valid block count leak on data block allocation failure
- fix dentry folio leak in find_in_level
- reject overlapping move range after len expansion
- fix some bugs related to file pinning, GC functions, i_size
And, the series includes a number of minor bug fixes"
* tag 'f2fs-for-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
f2fs: support resizable tail section and unify pinned allocation
f2fs: don't leave the hashed inode while it's unlinked
f2fs: accurately adjust free_sections during free_segment_range
f2fs: fix to avoid potential deadloop in f2fs_fsync_node_pages()
f2fs: use adjusted write range after f2fs_write_checks()
f2fs: fix to propagate error from f2fs_sync_fs()
f2fs: return symlink writeback errors
f2fs: fix error handling on device alias check in rename and unlink
f2fs: fix to reset all pinned status during fggc
f2fs: use f2fs_{down, up}_(read, write}_trace() for nat_tree_lock
f2fs: reduce memory footprint of ino management
f2fs: fix i_size when pinned fallocate partially fails
f2fs: fix to migrate all curseg types during free_segment_range
f2fs: avoid setting SBI_NEED_FSCK on transient resize failure
f2fs: fix to avoid pinfile fragment on fragment:{block, segment} mode
f2fs: cleanup w/ f2fs_need_rand_{blk, seg, seg_blk}
f2fs: fix to shrink gc_lock coverage in f2fs_gc_range()
f2fs: fix to reclaim space in f2fs_allocate_pinning_section()
f2fs: unify add/remove ino entry API for all ino types
f2fs: fix to zero post-EOF data when extending file size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of various small fixes since the last PR. Most changes
are device-specific fixes, while there are a few fixes addressing the
issues reported recently by fuzzers.
Here are highlights:
ALSA Core:
- Prevent adding invalid kcontrols to the LED layer
- Workaround for a false-positive mutex lockdep warning in rawmidi
USB-audio:
- Relaxed the sticky mixer behavior check that caused regressions
- Fix an OOB write in Novation MIDI output
- Proper cleanup after system-resume errors
- Quirk updates for M-Audio Venom, Audient iD14 MkI, Logitech PRO X
Wireless, SMSL USB DAC, and Creative Sound Blaster Play! 3
HD-audio:
- Conexant headset plugin fixes
- Quirk additions and fixes for HP Laptop 15, Lenovo IdeaPad Slim 3,
TongFang XxAF5xxx, Lenovo Legion Pro 7, and Lenovo Yoga Pro 9
ASoC:
- DAPM: Fix off-by-one check on the second enum channel
- Tegra: Fix and sort register defaults
- AMD quirk updates for ASUS FA401EA, HP OmniBook X Flip 16,
HVY-WXX9/M1060, Alienware m18 R1, and MSI Thin A15 B7UC
- Fixes Qualcomm TDM handling
- Fix double put_device() on SoundWire
- Codec fixes for rt766, tac5xx2, rt712, tas2783, and max98926
Misc:
- Fix card leak on probe error on ice1712 driver
- Hardening for legacy aoa, mtpav and pcxhr drivers"
* tag 'sound-fix-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (53 commits)
ALSA: control: Don't add invalid kcontrols to LED layer
ASoC: amd: acp-config: change quirks to cover all ASUS FA401EA variants
ALSA: hda/conexant: Always enable the headset-mic pin on plugin
ASoC: dapm: Fix off-by-one check on the second enum channel
ASoC: amd: acp-config: force SoundWire probe on HP OmniBook X Flip 16
ASoC: amd: acp3x-es83xx: Add HVY-WXX9/M1060 DMI quirk
ASoC: amd: acp-config: Add HVY-WXX9/M1060 DMI quirk
ASoC: soc-generic-dmaengine: Fix DMA channel request warning
ALSA: rawmidi: Another workaround for false-positive mutex lockdep warning
ASoC: amd: yc: Add DMI entry for Alienware m18 R1 AMD
ASoC: amd: yc: Add DMI entry for MSI Thin A15 B7UC
ALSA: hda/realtek: Fix speaker mute LED for HP Laptop 15-fd0039nt
ALSA: usb-audio: Complete cleanup after system-resume errors
ALSA: hda/realtek: Add quirk for Lenovo IdeaPad Slim 3 15ABR8
ALSA: aoa: i2sbus: Check IRQ before requesting it
ALSA: usb-audio: Skip mixer creation on M-Audio Venom
ALSA: usb-audio: Skip reading sample rate on M-Audio Venom
ASoC: rt766: add RT766/RT767 VA1 device IDs
ALSA: hda/realtek: Add quirk for TongFang XxAF5xxx
ALSA: usb-audio: fix OOB write in snd_usbmidi_novation_output()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM updates from Jarkko Sakkinen:
"The bulk of this is Ross Philipson's TPM enablement for Trenchboot.
That exposes TPM constants, and decouple and improve robustness of
tpm_buf a bit in order to implement a minimal early TPM driver.
Early boot code will call either SKINIT on AMD or GETSEC[SENTER] on
Intel before jumping into kernel's entry point. They re-initalize TPM
PCRs but leave up to the early boot code measure initrd, boot_params
and Trenchboot associated metadata.
The motivation here is just that we would want in future iterations of
the series put our full focus to the x86 part of the review, and call
it a day as per TPM changes. Further, even if Trenchboot turned out to
be empty lottery the worst possible outcome for TPM driver is that
things get cleaned up a bit"
* tag 'for-next-tpm-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm-buf: Add TPM buffer support header for standalone reuse
tpm-buf: Memory-safe allocations
tpm-buf: Remove chip parameter from tpm_buf_append_handle()
tpm-buf: Merge TPM_BUF_BOUNDARY_ERROR and TPM_BUF_OVERFLOW
tpm: Remove main TPM header from TPM event log header
tpm: Move platform specific definitions to the new PTP header
tpm: Move TPM common base definitions to the command header
tpm: Move TPM2 specific definitions to the command header
tpm: Move TPM1 specific definitions to the command header
tpm: Initial step to reorganize TPM public headers
tpm: st33zp24: Validate locality read result
tpm: st33zp24: Return zero on status read failure
tpm: tpm_tis_spi: fix nodef CR50 tpm_tis_spi_resume is null
tpm: atmel: depend on X86
tpm: Remove redundant dev_err()
tpm: tpm_i2c_nuvoton: disable IRQ on wait timeout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, IPSec and Netfilter.
Current release - fix to a fix:
- netfilter: ipset: remove need to allocate memory on delete operations
Current release - regressions:
- macb: drop CONFIG_OF #if block, fix build
Previous releases - always broken:
- stream of fixes for SCTP continues
- inet: frags: strip GSO state from fragments before reassembly
- virtio-net: ensure that TCP packets don't overflow gso_segs
- tcp-ao: fix use-after-free of current_key on reconnect to another
peer
- page_pool: remove zone/policy GFP flags when allocating XArray
entries
- Bluetooth: L2CAP: reject accept queue add unless BT_LISTEN
- tls: device: fix out-of-bounds write in tls_append_frag()
- eth: bnxt:
- ring the doorbell when SW USO exits early, avoid packets stuck
in Tx
- gate TPH enablement behind BNXT_SUPPORTS_QUEUE_API check, avoid
users of older NICs seeing non-actionable warning messages
- eth: qede: fix NULL pointer dereference in TPA fragment processing"
* tag 'net-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (216 commits)
inet: frags: strip GSO state from fragments before reassembly
net/sched: sch_htb: limit htb_classify inner-class filter hops
selftests/net: packetdrill: add tcp_urg_ptr_retransmit
tcp: fix corruption of urgent data on multi-segment retransmit
usb: atm: usbatm: fix invalid ci_range initialization
net: fec: only stop PTP if it was initialized
slip: remove slip_hangup() to fix use-after-free in slip_receive_buf()
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup
net: dsa: mxl862xx: enable assisted learning on CPU port
net: stmmac: restore NET_IP_ALIGN in the RX DMA offset
net: stmmac: drop gso_enabled_types and rely on netdev features
net: stmmac: selftests: Don't test flow control for small rx fifos
net: stmmac: selftests: Account for the UC filter list for filtering tests
net: stmmac: dwxgmac: Account for the primary MAC address for UC filtering
net: stmmac: dwmac4: Account for the primary MAC address for UC filtering
net: stmmac: dwmac1000: Account for the primary MAC address for UC filtering
net: stmmac: selftests: Check multiple MMC counters
selftests: net: Fix slow configurations in big_tcp_tunnels.sh
selftests: net: Lower threshold with csum offload off in big_tcp_tunnels.sh
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Use DEBUG_NET_WARN_ON_ONCE() instead of WARN_ON() from the tproxy
datapath, a recent bug found a way to reach WARN_ON from datapath
due to insufficient validation of xt_TPROTO checkentry.
From Fernando F. Mancera.
2) Similar to previous patch to replace WARN_ON_ONCE by
DEBUG_NET_WARN_ON_ONCE() for connlimit. Not known issue, but
since this patch has been around for a while, let's merge it.
Also from Fernando.
3) Move nf_tables harware offload commit path after chain blob
and audit to reduce chances of leaving the hardware in
inconsistent state.
4) Add missing vzeroupper to nf_tables pipapo AVX2 to address
performace degradation to later user of SSE code,
from Eric Biggers.
5) Remove pr_debug() in x_tables extensions, a recent bogus found a
way to print a unsanitized string in xt_IDLETIMER, many of these
pr_debug() calls are there for historical reasons.
6) Use pr_info_ratelimited() in x_tables .checkentry.
7) Fix an imbalance in module refcount due to incorrect override
expression logic with sets. Remove unnecessary clone in control
plane, use the existing expressions provided by set or dynset
expression. Release override expressions only.
8) Tigthen nf_tables device name removal, it is possible to remove
prefix strings with exact device name. From Fernando F. Mancera.
9) Set on the set dead bit earlier, otherwise it is possible to
call .commit on deleted sets. This also addresses the
re-introduction of a bug.
* tag 'nf-26-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: remove leftover set_update_list
netfilter: nf_tables: set on dead bit when performing early element removal
netfilter: nf_tables: skip double clone set expressions on element insert
netfilter: x_tables: replace pr_{info,err}() by pr_info_ratelimited()
netfilter: x_tables: remove pr_debug
netfilter: nft_set_pipapo_avx2: add missing vzeroupper
netfilter: nf_tables: move hardware offload step after building the chain blob
netfilter: conncount: use DEBUG_NET_WARN_ON_ONCE on reaching count limit
netfilter: tproxy: use DEBUG_NET_WARN_ON_ONCE for protocol fallbacks
====================
Link: https://patch.msgid.link/20260827141733.423453-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qdisc_get_stab() accepts a user-supplied size table, and
__qdisc_calculate_pkt_len() amplifies qdisc_pkt_len() through the
overhead, the size-table data (u16), and size_log (up to
STAB_SIZE_LOG_MAX). A crafted stab can therefore set qdisc_pkt_len()
to ~1 GiB for an ordinary skb. Per-flow deficit schedulers such as
DRR and ETS replenish one quantum per loop iteration; with a tiny
quantum (1) they spin billions of times under the qdisc lock,
producing a soft lockup / RCU stall as illustrated by vega@nebusec.ai.
Cap the final qdisc_pkt_len() to QDISC_PKT_LEN_MAX so the size-table
amplification cannot drive deficit schedulers into an unbounded loop.
A legitimate size table (e.g. qfq's overhead 999999999, which is
handled by dropping) is still accepted.
Introduce cap QDISC_PKT_LEN_MAX (1 << 20) = 1 MiB which is well above
any legitimate single-skb wire length: the largest current skb->len
is GSO_MAX_SIZE (524280), and an ATM-style size table (53/48 cell tax)
amplifies that to ~578 KB, both comfortably below 1 MiB. At the same
time, 1 MiB bounds the deficit refill loop to ~1M iterations per
packet with quantum=1, which completes in a few milliseconds well
under the demonstrated softlockup threshold (~10^9 iterations).
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_NET_SCH_DRR=y (or CONFIG_NET_SCH_ETS=y).
- Attach a DRR (or ETS) root qdisc with a crafted TCA_STAB that
amplifies qdisc_pkt_len to ~1 GiB (e.g. size_log=15, data=[32768]).
- Add a class with a tiny quantum of 1 and send one small packet; the
deficit loop spins billions of times under the qdisc lock and trips
the softlockup detector (panic with kernel.softlockup_panic=1).
- Reachable as root or from an unprivileged user in a fresh user+net
namespace (unshare -Urn) with namespace-local CAP_NET_ADMIN.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: vega@nebusec.ai
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260825081403.133992-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Core: Extend netdev trigger speeds up to 100G
- PWM Multicolor: Introduce default-intensity property
- Analog Devices LTC3220: Add support for 18 channel LED driver
- NXP PCA963x: Add multicolor LED class support
Improvements & Fixes:
- GPIO: Clear error pointers for skipped LEDs
- Broadcom BCM63138: Use %pe to print pinctrl error instead of %ld
- ISSI IS31FL319x: Modernize device registration by using fwnode APIs
- NXP PCA9532: Fix inverted GPIO output polarity
- NXP PCA9532: Fix phantom device registration on missing hardware
- STMicroelectronics ST1202: Correct and extend hw_pattern
documentation
- STMicroelectronics ST1202: Fix channel disable logic on zero
brightness and ensure brightness changes are applied in active mode
- STMicroelectronics ST1202: Fix hardware pattern sequence
programming, validate inputs, and correct pattern duration
calculations
- STMicroelectronics ST1202: Validate LED reg property against
channel count
- TI LP5860: Fix a potential double-unlock during device
initialization and fix error handling path by using
devm_mutex_init()
Cleanups & Refactoring:
- GPIO: Make legacy gpiolib interface optional
Device Tree Binding Updates:
- Core: Add default-intensity property
- Core: Document "gpio" trigger
- Analog Devices LTC3220: Add DT binding for LTC3220 18 channel LED
driver
- Broadcom BCM6358: Convert to DT schema
- LaCie NS2: Convert to DT schema
- NXP PCA963x: Add multicolor LED support
- NXP PCA963x: Fix reg maximum for pca9635
- TI TPS65217: Convert backlight bindings to DT schema"
* tag 'leds-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (29 commits)
leds: is31fl319x: Modernize registration
dt-bindings: leds: lacie,ns2-leds: Convert to DT schema
leds: pca963x: Add multicolor LED class support
dt-bindings: leds: nxp,pca963x: Add multicolor LED support
dt-bindings: leds: nxp,pca963x: Fix reg maximum for pca9635
leds: gpio: Clear error pointers for skipped LEDs
dt-bindings: leds: backlight: Convert TPS65217 to DT schema
leds: pca9532: Fix phantom device registration on missing hardware
leds: gpio: Make legacy gpiolib interface optional
leds: bcm63138: Use %pe to print pinctrl error instead of %ld
dt-bindings: leds: Add default-intensity property
leds: ltc3220: Add Support for LTC3220 18 channel LED Driver
dt-bindings: leds: Add LTC3220 18 channel LED Driver
dt-bindings: leds: bcm6358: Convert to DT schema
dt-bindings: leds: Document "gpio" trigger
leds: st1202: Correct and extend hw_pattern documentation
leds: st1202: Validate LED reg property against channel count
leds: st1202: Disable channel when brightness is set to zero
leds: st1202: Fix brightness having no effect while pattern mode is active
leds: st1202: Fix spurious pattern sequence start in setup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- MediaTek MT6397: Add mt6323 AUXADC support
- MediaTek MT6397: Add mt6323 EFUSE support
- Spreadtrum SC27xx: Add SC2730 regulator cell
Improvements & Fixes:
- Apple SMC: Fix key count endianness annotation
- Azoteq IQS62x: Reject zero-length firmware records
- ChromeOS EC: Introduce cros_ec_read_features helper and read
features during probe to catch transfer errors
- Cirrus Logic CS42L43: Fix regmap defaults ordering
- Cirrus Logic CS42L43: Remove redundant NULL checks on SoundWire
- Congatec Board Controller: Fix teardown ordering in cgbc_remove()
- HP iPAQ Micro: Fix out-of-bounds stack read in ipaq_micro_str
- Marvell 88PM886: Initialize the battery page
- QNAP MCU: Keep the reply buffer alive past a command timeout
- RAVE SP: Validate received frame payload lengths
- Silicon Labs Si476x: Drop duplicate NULL checks
- Silicon Labs Si476x: Modernize GPIO handling
- Silicon Motion SM501: Fix potential memory leaks during remove
- UCB1x00: Convert Assabet gpio-keys to use software nodes and
register software node for GPIO controller
- Viperboard: Fix native fields type in structures as little-endian
- Viperboard: Remove redundant NULL check before kfree()
- X-Powers AXP20x: Preserve other control bits when powering off
Cleanups & Refactoring:
- Core: Drop unused assignment of spi_device_id driver data
- Core: Initialize spi_device_id arrays using member names
- Core: Unify style of spi_device_id arrays
- Maintainers: Add Intel LPSS section to follow the changes
- Maintainers: Add a mailing list entry to MFD
- Cirrus Logic CS42L43: Format sdw_device_id table
- Cirrus Logic CS42L43: Use new SoundWire enumeration helper
- ROHM PMIC: Factor out power button registration and convert
gpio-keys to use software nodes
- ST-Ericsson DB8500: Fold dbx500 header into db8500
Device Tree Binding Updates:
- Core: Add techvision vendor prefix
- Marvell 88PM886: Allow vbus regulator
- MediaTek MT8195 SCP: Add support for MT8189 SoC
- Qualcomm SPMI PMIC: Document PMG1110
- Qualcomm SPMI PMIC: Document haptics device
- Qualcomm TCSR: Add compatible for Hawi and Maili SoCs
- Qualcomm TCSR: Add compatible for Shikra
- Qualcomm TCSR: Document the IPQ9650 TCSR block
- STMicroelectronics STMPE: Fix typo st,stmpe601 (should be
st,stmpe610)
- Syscon: Add ESWIN EIC7700 compatible
- Syscon: Allow syscon compatible for Loongson-2K0300 chip id
- Syscon: Disallow simple-bus with syscon
- Syscon: Drop custom select for older dtschema
- TI OMAP USBHS TLL: Convert to DT schema"
* tag 'mfd-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
mfd: cs42l43: Fix regmap defaults ordering
dt-bindings: mfd: syscon: Allow syscon compatible for Loongson-2K0300 chip id
dt-bindings: mfd: syscon: Add ESWIN EIC7700 compatible
mfd: qnap-mcu: keep the reply buffer alive past a command timeout
dt-bindings: mfd: qcom,tcsr: Document the IPQ9650 TCSR block
mfd: macsmc: Fix key count endianness annotation
dt-bindings: mfd: qcom,spmi-pmic: Document haptics device
mfd: iqs62x: Reject zero-length firmware records
mfd: rave-sp: validate received frame payload lengths
mfd: sm501: Fix potential memory leaks during remove
mfd: viperboard: Fix native fields type in structures as little-endian
mfd: si476x-i2c: Get rid of duplicate NULL checks
dt-bindings: mfd: Convert OMAP USB TLL to DT schema
mfd: cgbc: Fix teardown ordering in cgbc_remove()
mfd: mt6397-core: Add mt6323 AUXADC support
dt-bindings: mfd: qcom,tcsr: Add compatible for Hawi and Maili SoCs
mfd: rohm: Factor out power button registration
mfd: ucb1x00: Convert Assabet gpio-keys to use software nodes
mfd: ucb1x00: Register software node for GPIO controller
mfd: cs42l43: Tidy up formatting on sdw_device_id table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/rmap: index MAP_PRIVATE file-backed folios by anonymous pgoff"
(Lorenzo Stoakes)
Index MAP_PRIVATE file-backed folios by their anonymous page offset
to resolve confusion around reverse mapping for zeroed and CoW'd
file-backed memory.
Use this new VMA anonymous page offset tracking to eliminate index
conflicts and lay the foundation for scalable CoW performance
improvements.
- "promote mapped executable folios after first usage for MGLRU"
(Baolin Wang)
Make MGLRU's protection of mapped executable file folios more
reliable. Follow the classical LRU's logic, promoting mapped
executable file folios after their first usage to give executable
code a better chance to stay in memory and improve workload
performance.
- "mm: vmscan: fix node reclaim ignoring swappiness parameter" (Ridong
Chen)
Fix per-node proactive reclaim interface's ignoring the swappiness
parameter when CONFIG_MEMCG is disabled by consolidating
sc_swappiness() into a single function that checks
proactive_swappiness regardless of kernel configuration.
- "mm/vmscan: reduce lru_lock contention via vmstat-derived
scan-balance cost" (Usama Arif)
Reduce lru_lock contention in the reclaim path by deriving
scan-balance costs from vmstat counters rather than lock-acquired
producer updates.
Read and decay these cost signals on the reclaim side under a
dedicated per-lruvec lock, reducing total LRU lock wait time by over
60% without impacting scan throughput.
- "zram: fix zram issues reported by sashiko" (Sergey Senozhatsky)
Fix two low-risk zram bugs which Sashiko spotted in drive-by review.
- "Honor XA_FLAGS_ACCOUNT in xas_split_alloc() and charge to folio's
memcg" (Zi Yan)
Fix xas_split_alloc() by enabling target folio memcg charging during
splits and adding the missing __GFP_ACCOUNT flag for proper XArray
node memory accounting.
- "selftests/mm: use pattern matching in .gitignore" (Pratyush Mallick)
Replace hardcoded binary names in selftests/mm/.gitignore with a
generic pattern-matching rule to automatically ignore generated test
files and avoid manual updates when adding new tests.
- "mm/page_ext: remove pgdat_page_ext_init()" (Sang-Heon Jeon)
Make the incompatibility between FLATMEM and NUMA explicit in
mm/Kconfig and remove the unused pgdat_page_ext_init() function.
- "zram: fix zstd error paths and add parameter validation" (Haoqin
Huang)
Clean up zram compression backends by removing redundant error
cleanup, adding parameter and dictionary validation, auto-prefixing
algorithm error logs, and resetting parameters prior to
reinitialization.
- "zram: fix stale scan bounds after reinitialization" (Longlong Xia)
Prevent out-of-bounds slot accesses during concurrent zram resets by
moving table scan bound calculations under dev_lock in
writeback_store() and read_block_state().
- "add anon mTHP collapse test cases" (Baolin Wang)
Extend selftests helper functions to support arbitrary page orders
and add new test cases and options for mTHP collapse in khugepaged.
- "selftests/mm: Handle unsupported and transient test conditions"
(Muhammad Usama Anjum)
Update MM selftests to report a SKIP status instead of a failure when
required kernel or filesystem features are unsupported, while adding
retry logic for transient page migration errors.
- "mm/zswap: Fixes and improves the zswap shrink" (Hao Jia)
Fix the missing zswap global shrinker when CONFIG_MEMCG is disabled
and extend shrink_memcg() to support batch writeback for improved
writeback efficiency.
- "alloc_tag: introduce IOCTL-based filtering for MAP" (Suren
Baghdasaryan)
Introduce an IOCTL-based binary interface for memory allocation
profiling that enables kernel-side filtering before per-CPU counter
aggregation.
This eliminates the text-parsing overhead of /proc/allocinfo and
provides up to a 20x speedup by transferring only filtered allocation
data to userspace.
- "better block swap batching and a different take on swap_ops v5"
(Christoph Hellwig)
Refactor block swap I/O to use swap_iocb for batching instead of
single-bio requests and rebase the swap_ops interface, achieving
faster swap throughput during kernel builds.
- "mm: kmemleak: reduce transient false positives by confirming leaks"
(Catalin Marinas)
Reduce false-positive kmemleak reports by combining two kmemleak
enhancements that add a second confirmation scan and a configurable
minimum unreferenced scan count module parameter.
- "mm: kmemleak: default min_unref_scans to 2 for verbose kernels"
(Breno Leitao)
Auto-scanning kernels can generate false-positive memory leak reports
on single scans, so this patch defaults min_unref_scans to 2 when
CONFIG_DEBUG_KMEMLEAK_VERBOSE is enabled to require a second
confirming scan.
- "swap_ops updates" (Christoph Hellwig)
Batching I/O for synchronous swap devices causes performance
regressions and filesystem-based swap suffers from double-indirection
overhead. This series resolves both issues by reintroducing per-folio
writes for synchronous swap and allowing filesystems to directly
export their own swap_ops.
- "mm/khugepaged: several cleanups" (Nico Pache)
khugepaged accumulated redundant state-checking patterns and outdated
comments following mTHP integration. Introduce dedicated helpers for
PTE validation and event counting while refreshing the internal
documentation.
- "maple_tree: lock checking and clean ups" (Liam Howlett)
Syzbot reports incorrectly blame memory management exit paths for
locking bugs, maple tree erase operations risk allocation failures
without gfp flags and internal documentation lacks clarity.
Improve lock error detection, update docs, fix race and allocation
edge cases and optimize erase allocations using a fallback to
GFP_KERNEL | GFP_NOFAIL.
* tag 'mm-stable-2026-08-26-15-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (172 commits)
selftests/proc: make proc-maps-race work with READ_IMPLIES_EXEC
memcg: move LRU size accounting on reparenting instead of copying it
mm/vmscan: fix comment logic in balance_pgdat
maple_tree: add helper mas_make_walkable()
maple_tree: avoid extra gap calculation
maple_tree: fix argument name in header
maple_tree: change two GFP flags in tests
maple_tree: document erase and allocations better
maple_tree: avoid mas_erase() and mtree_erase() failures
maple_tree: document that erase may use GFP_KERNEL for allocations
maple_tree: catch race in mas_alloc_cyclic()
maple_tree: add bulk parent set helper
maple_tree: micro optimisation of mas_wr_store_type()
maple_tree: optimise mas_wr_node_store() when not in rcu mode
maple_tree: use prefetched value in mas_wr_store_type()
maple_tree: clarify comments on mas_nomem()
maple_tree: drop MAPLE_ALLOC_SLOTS
maple_tree: drop dead code from mas_extend_spanning_null()
maple_tree: documentation fix
maple_tree: add write lock checking with lockdep sequence numbers
...
|
|
Moving the register definitions to a global header file
include/linux/designware_i2c.h. That removes the need to
duplicate them in the adaptation layers for this driver
outside of drivers/i2c/busses/. There is at least one of
those in drivers/gpu/drm/xe/xe_i2c.c.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260811121008.1493015-2-heikki.krogerus@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 2ab2fb31411a494e4579dfacda986a2672f80e65)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.3
A fairly big batch of fixes that came in during the merge window.
There's a lot of quirks for x86 systems and a bunch of driver specific
fixes, the most critical being the fixes for Tegra's register
definitions. It turned out that they had been relying on the regmap
default handling bugs that were fixed in v7.2 and so audio was fairly
badly broken, unfortunately the issue wasn't noticed in time for
release.
|
|
Both the dynset and newsetelem path clone the existing set expressions
when setting set element expressions if no override expressions are
provided. This results in a double clone, once to clone the template set
expressions then another clone on the new element. Add a flag to
annotate if userspace provides a override expression (ie. expression of
the same type of the set but different configuration), otherwise borrow
the existing expression from the set. Add conditionals to release
expression iif they represent an override. Use this new override_exprs
flag to dump the dynset expression override to userspace.
This simplifies the existing logic and it also fixes a bug with the
connlimit expression which results in a module refcount imbalance
WARNING splat when resorting on the default set expressions.
Fixes: 65038428b2c6 ("netfilter: nf_tables: allow to specify stateful expression in set definition")
Fixes: fca05d4d61e6 ("netfilter: nft_dynset: honor stateful expressions in set definition")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The user can specify any gso_size in a packet crafted with an AF_PACKET
PACKET_VNET_HDR socket, even smaller than TCP_MIN_GSO_SIZE = 8. At the
same time, GSO_MAX_SIZE = 8 * GSO_MAX_SEGS = 8 * 65535. When the user
crafts a packet with gso_size < 8, there is a risk for partial GSO to
overflow the 16-bit gso_segs field when dividing the SKB length by
gso_size.
Adjust gso_size of TCP packets to be at least TCP_MIN_GSO_SIZE = 8. Keep
gso_size of UDP GSO packets, as gso_size=1 is valid and explicitly
tested at tools/testing/selftests/net/tun.c:649.
Fixes: 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user")
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260822120117.1163423-2-alice.kernel@fastmail.im
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Decrypt netvsc buffer on contiguous direct-map addresses (Kameron
Carr)
- Drop WS2012/2012R2 & Win8/8.1 Hyper-V support (Michael Kelley)
- Use more meaningful errnos for hypercall status code (Hardik Garg)
- Fix lost interrupts on CPU hot-unplug for Hyper-V PCI/MSI (Naman
Jain)
- Reserve more MSHV vectors for Linux root partition (Wei Liu)
* tag 'hyperv-next-signed-20260826' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
clocksource: hyper-v: Remove support for stimer interrupts in message mode
scsi: storvsc: Remove support for storvsc protocol of old Hyper-V hosts
hv_netvsc: Remove GPADL teardown special case for old Hyper-V hosts
hv_sock: Remove check for old Hyper-V hosts
Drivers: hv: Remove support for WS2012/2012R2 & Win8/8.1 version of Hyper-V
hv_netvsc: Allocate send/receive buffers using vmbus_alloc_buffer()
Drivers: hv: vmbus: Add vmbus_alloc_buffer()/vmbus_free_buffer() for CoCo VMs
Drivers: hv: vmbus: add vmbus_establish_gpadl_caller_decrypted()
Drivers: hv: vmbus: Skip VMBus module cleanup for non-nested root partition
x86/hyperv: reserve more vectors
PCI: hv: Set irq_retrigger callback for the Hyper-V PCI MSI irqchip
Drivers: hv: Use meaningful errnos for hypercall status codes
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- Use-after-free fixes for the sunrpc client code
- Delegation hash table leak
- NULL dereference on lockowner allocation failure
- Fix a handshake completion race in the TLS code
- Fix an error sign checking issue when deciding whether the pNFS
layout is still in use, or can be returned
- Fix a layout segment leak in pnfs_layout_process()
Other bugfixes:
- Fix a missing NULL check in the rpcbind client
- annotate shared socket callbacks with READ_ONCE/WRITE_ONCE
- nfs_inode_set_delegation() error paths should return the delegation
- Use clear_and_wake_up_bit() in nfs_clear_invalid_mapping() and the
pNFS code.
- Fix the nfs4_alloc_client() error paths to free the IDR allocation
- fix folio dereference before NULL check in
nfs_inode_remove_request()
- Fix delayed delegation return
- Fix another state manager race with umount
- Fix device leaks on parse failure
- Avoid cancelling in-flight I/O during a layout recall if the server
doesn't require it
- flexfiles: report cancelled I/O as a layout error
- flexfiles: fix NULL dereference for NFSv4.0 data servers
- Fix incorrect argument passed to nfs4_delete_lease()
- Fix several symlink issues resulting from nfs_atomic_open_v23()
- Fix an uninitialised variable issue in the NFSv4.1 callback code
- fix LAYOUTSTATS send buffer exhaustion
Features and cleanups:
- NFSv4.2: Allow the server to specify that file data may not be cached
- localio: optimise I/O submission when when not doing memory reclaim
- localio: Remove duplicate wait code in nfs_local_commit
- flexfiles: support loosely coupled NFSv4.x data servers
- pNFS: key the data server cache on the NFS version"
* tag 'nfs-for-7.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (33 commits)
NFSv4.1: fix layout segment leak on the pnfs_layout_process() forget path
NFSv4/pnfs: key the data server cache on the NFS version
NFSv4.2: fix LAYOUTSTATS send buffer exhaustion
pNFS: Fix EBUSY check in pnfs_layout_need_return
NFSv4.1: zero referring call lists before decoding
nfs: fix ENXIO on O_CREAT open of existing symlink over NFSv3
SUNRPC: wait for in-flight client TLS handshake callback
NFSv4: Fix incorrect argument passed to nfs4_delete_lease() in nfs4_add_lease()
lockd: fix NULL dereference on lockowner allocation failure
NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails
NFSv4/flexfiles: support loosely coupled data servers
NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers
NFSv4: pin the superblock for active state owners
sunrpc: fix use-after-free in __rpc_clnt_handle_event and __rpc_clnt_remove_pipedir
NFS/localio: issue commit inline when not in a memory-reclaim context
NFS/localio: remove dead FLUSH_SYNC handling from nfs_local_commit
NFS/localio: issue IO inline when not in a memory-reclaim context
NFS: Fix delayed delegation return list handling
NFS: Verify symlink inode before caching target
NFS: fix folio dereference before NULL check in nfs_inode_remove_request()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"This mostly consists of assorted updates of thermal drivers, including
new hardware support (Airoha AN7583, Qualcomm Master BandGap thermal
monitor, QCom PMIC5 Gen3 ADC), but it also includes two reverts of
recent cosmetic thermal core updates that went against driver core
plans to eliminate class_create():
- Fix missing bitfield include headers in Armada and QCom SPM BMG
drivers (Daniel Lezcano)
- Fix missed file when manually applying a change after a conflict
resolution for the QCom SPMI ADC TM5 Gen3 (Daniel Lezcano)
- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval
on Airoha (Christian Marangi)
- Make use of the regmap API to support Airoha AN7583 (Christian
Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in a thermal OF code comment (Marek Vasut)
- Remove unnecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxiliary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property
in the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled on failing resume operation on Qoriq (Can
Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after
the clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
- Add IIO_CONSUMER namespace import to the qcom-spmi-mbg-tm thermal
driver to avoid modpost warnings that would appear after merging
the iio tree against the thermal updates (Nathan Chancellor)
- Revert two recent cosmetic updates of the thermal core conflicting
with driver core plans to eliminate class_create() (Rafael
Wysocki)"
* tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
thermal/drivers/qcom-spmi-mbg-tm: Add module namespace import for IIO_CONSUMER
Revert "thermal/core: Allocate the thermal class dynamically"
Revert "thermal/core: Use the thermal class pointer as init guard"
thermal/drivers/armada: Fix missing bitfields include
thermal/drivers/qcom/spm mbg tm: Fix missing bitfield header
thermal/drivers/qcom: Fix missing spmi adc tm5 gen3 file
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
...
|
