kernel/git/stable/linux.git/arch/arc/include, branch linux-4.12.y

ARCv2: PAE40: set MSB even if !CONFIG_ARC_HAS_PAE40 but PAE exists in SoC

2017-08-30T08:26:32+00:00

commit b5ddb6d54729d814356937572d6c9b599f10c29f upstream. PAE40 confiuration in hardware extends some of the address registers for TLB/cache ops to 2 words. So far kernel was NOT setting the higher word if feature was not enabled in software which is wrong. Those need to be set to 0 in such case. Normally this would be done in the cache flush / tlb ops, however since these registers only exist conditionally, this would have to be conditional to a flag being set on boot which is expensive/ugly - specially for the more common case of PAE exists but not in use. Optimize that by zero'ing them once at boot - nobody will write to them afterwards Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman

ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses

2017-08-30T08:26:32+00:00

commit 7d79cee2c6540ea64dd917a14e2fd63d4ac3d3c0 upstream. It is necessary to explicitly set both SLC_AUX_RGN_START1 and SLC_AUX_RGN_END1 which hold MSB bits of the physical address correspondingly of region start and end otherwise SLC region operation is executed in unpredictable manner Without this patch, SLC flushes on HSDK (IOC disabled) were taking seconds. Reported-by: Vladimir Kondratiev Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta [vgupta: PAR40 regs only written if PAE40 exist] Signed-off-by: Greg Kroah-Hartman

arch: remove unused macro/function thread_saved_pc()

2017-06-28T23:13:57+00:00

The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d5597793 ("sched/core: Remove pointless printout in sched_show_task()"). Remove the implementations as well. Some architectures use thread_saved_pc() in their arch-specific code. Leave their thread_saved_pc() intact. Signed-off-by: Tobias Klauser Acked-by: Geert Uytterhoeven Cc: Ingo Molnar Signed-off-by: Linus Torvalds

Merge tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2017-05-11T03:45:36+00:00

Pull Kbuild UAPI updates from Masahiro Yamada: "Improvement of headers_install by Nicolas Dichtel. It has been long since the introduction of uapi directories, but the de-coupling of exported headers has not been completed. Headers listed in header-y are exported whether they exist in uapi directories or not. His work fixes this inconsistency. All (and only) headers under uapi directories are now exported. The asm-generic wrappers are still exceptions, but this is a big step forward" * tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: arch/include: remove empty Kbuild files uapi: export all arch specifics directories uapi: export all headers under uapi directories smc_diag.h: fix include from userland btrfs_tree.h: fix include from userland uapi: includes linux/types.h before exporting files Makefile.headersinst: remove destination-y option Makefile.headersinst: cleanup input files x86: stop exporting msr-index.h to userland nios2: put setup.h in uapi h8300: put bitsperlong.h in uapi

uapi: export all headers under uapi directories

2017-05-10T15:21:54+00:00

Regularly, when a new header is created in include/uapi/, the developer forgets to add it in the corresponding Kbuild file. This error is usually detected after the release is out. In fact, all headers under uapi directories should be exported, thus it's useless to have an exhaustive list. After this patch, the following files, which were not exported, are now exported (with make headers_install_all): asm-arc/kvm_para.h asm-arc/ucontext.h asm-blackfin/shmparam.h asm-blackfin/ucontext.h asm-c6x/shmparam.h asm-c6x/ucontext.h asm-cris/kvm_para.h asm-h8300/shmparam.h asm-h8300/ucontext.h asm-hexagon/shmparam.h asm-m32r/kvm_para.h asm-m68k/kvm_para.h asm-m68k/shmparam.h asm-metag/kvm_para.h asm-metag/shmparam.h asm-metag/ucontext.h asm-mips/hwcap.h asm-mips/reg.h asm-mips/ucontext.h asm-nios2/kvm_para.h asm-nios2/ucontext.h asm-openrisc/shmparam.h asm-parisc/kvm_para.h asm-powerpc/perf_regs.h asm-sh/kvm_para.h asm-sh/ucontext.h asm-tile/shmparam.h asm-unicore32/shmparam.h asm-unicore32/ucontext.h asm-x86/hwcap2.h asm-xtensa/kvm_para.h drm/armada_drm.h drm/etnaviv_drm.h drm/vgem_drm.h linux/aspeed-lpc-ctrl.h linux/auto_dev-ioctl.h linux/bcache.h linux/btrfs_tree.h linux/can/vxcan.h linux/cifs/cifs_mount.h linux/coresight-stm.h linux/cryptouser.h linux/fsmap.h linux/genwqe/genwqe_card.h linux/hash_info.h linux/kcm.h linux/kcov.h linux/kfd_ioctl.h linux/lightnvm.h linux/module.h linux/nbd-netlink.h linux/nilfs2_api.h linux/nilfs2_ondisk.h linux/nsfs.h linux/pr.h linux/qrtr.h linux/rpmsg.h linux/sched/types.h linux/sed-opal.h linux/smc.h linux/smc_diag.h linux/stm.h linux/switchtec_ioctl.h linux/vfio_ccw.h linux/wil6210_uapi.h rdma/bnxt_re-abi.h Note that I have removed from this list the files which are generated in every exported directories (like .install or .install.cmd). Thanks to Julien Floret for the tip to get all subdirs with a pure makefile command. For the record, note that exported files for asm directories are a mix of files listed by: - include/uapi/asm-generic/Kbuild.asm; - arch//include/uapi/asm/Kbuild; - arch//include/asm/Kbuild. Signed-off-by: Nicolas Dichtel Acked-by: Daniel Vetter Acked-by: Russell King Acked-by: Mark Salter Acked-by: Michael Ellerman (powerpc) Signed-off-by: Masahiro Yamada

Merge tag 'arc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

2017-05-09T17:10:15+00:00

Pull ARC updates from Vineet Gupta: - AXS10x platform clk updates for I2S, PGU - add region based cache flush operation for ARCv2 cores - enforce PAE40 dependency on HIGHMEM - ptrace support for additional regs in ARCv2 cores - fix build failure in linux-next dut to a header include ordering change * tag 'arc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: Revert "ARCv2: Allow enabling PAE40 w/o HIGHMEM" ARC: mm: fix build failure in linux-next for UP builds ARCv2: ptrace: provide regset for accumulator/r30 regs elf: Add ARCv2 specific core note section ARCv2: mm: micro-optimize region flush generated code ARCv2: mm: Merge 2 updates to DC_CTRL for region flush ARCv2: mm: Implement cache region flush operations ARC: mm: Move full_page computation into cache version agnostic wrapper arc: axs10x: Fix ARC PGU default clock frequency arc: axs10x: Add DT bindings for I2S audio playback

ARC: mm: fix build failure in linux-next for UP builds

2017-05-05T19:06:33+00:00

kisskb build service reported ARC defconfig build failures in linux-next | arch/arc/include/asm/mmu.h:75:21: error: 'NR_CPUS' undeclared here (not in a function) | make[3]: *** [arch/arc/mm/ioremap.o] Error 1 | make[2]: *** [arch/arc/mm] Error 2 | make[1]: *** [arch/arc] Error 2 which I bisected to a subtle side-effect of a totally benign mm patch ("mm, vmalloc: properly track vmalloc users") which caused a header include chain deviation - asm/mmu.h using NR_CPUS before including linux/threads.h Fix that by adding the dependnet header and while it at fix a related header to include linux headers aheads of asm headers as sometimes that slso triggers such issues ! Reported-by: noreply@ellerman.id.au Signed-off-by: Vineet Gupta

ARCv2: ptrace: provide regset for accumulator/r30 regs

2017-05-03T18:21:31+00:00

Signed-off-by: Vineet Gupta

ARCv2: mm: micro-optimize region flush generated code

2017-05-02T23:40:29+00:00

ARCv2: mm: Implement cache region flush operations

2017-05-02T22:57:22+00:00

These are more efficient than the per-line ops Signed-off-by: Vineet Gupta