kernel/git/stable/linux.git/arch/arm/boot, branch linux-7.2.y

ARM: dts: helios4: add SATA regulator supplies

2026-09-14T11:40:33+00:00

[ Upstream commit 7a90520e8c9a8f48fe6f3e741cf34d8c2b6dbc61 ] The ahci-mvebu driver and libahci_platform request three supplies on SATA controller and port nodes: - ahci-supply (controller power) - phy-supply (PHY power) - target-supply (disk power per port) Without them the regulator core prints notices at boot, e.g.: supply ahci not found, using dummy regulator supply phy not found, using dummy regulator supply target not found, using dummy regulator The SATA controller and PHY inside the Armada 388 SoC are powered by the 3.3V I/O rail; the four disk bays are powered by the 5V HDD rail. Wire the existing fixed regulators accordingly. Fixes: ced8025b569e ("ARM: dts: armada388-helios4") Assisted-by: opencode:big-pickle Signed-off-by: Rosen Penev Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin

ARM: dts: helios4: add vcc-supply to GPIO expander

2026-09-14T11:40:33+00:00

[ Upstream commit c23988f84496e937dd255564cb30bec67608dcc6 ] The pca953x driver requests a 'vcc' supply, producing: pca953x 0-0020: supply vcc not found, using dummy regulator The PCA9655 (PCA9555-compatible) expander is powered by the same always-on 3.3V rail as the other I2C devices on the bus. Add vcc-supply = <®_3p3v> to silence the warning. Fixes: ced8025b569e ("ARM: dts: armada388-helios4") Assisted-by: opencode:big-pickle Signed-off-by: Rosen Penev Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin

ARM: dts: helios4: add vcc-supply to EEPROM

2026-09-14T11:40:33+00:00

[ Upstream commit ef65cf08bd1aa723de2854d02fb8eb8cca273c90 ] The at24 driver requests a 'vcc' supply for the EEPROM, producing 'supply vcc not found, using dummy regulator' at boot when the property is missing. The EEPROM sits on the Helios 4 and is powered by the same always-on 3.3V rail used by other on-board I2C devices. Add vcc-supply = <®_3p3v> to silence the warning. Fixes: ced8025b569e ("ARM: dts: armada388-helios4") Assisted-by: opencode:big-pickle Signed-off-by: Rosen Penev Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin

ARM: dts: allwinner: a10: Fix PMU interrupt

2026-09-14T11:39:45+00:00

[ Upstream commit eb7051f756460d7b951e94d9656e31ebb631ba28 ] The Performance Monitoring Unit of the Cortex-A8 cores in the Allwinner A10 SoC is connected to interrupt line 66, not 3. This is shown in the manual (where interrupt 3 is assigned to UART2, also in our .dtsi), but has also been confirmed by triggering an PMU overflow interrupt and inspecting the IRQ controller status registers (from U-Boot). Please note that "perf stat" does not use interrupts, this might explain why this evaded the initial testing. Fixes: 7e345d25c796 ("ARM: dts: sun4i-a10: Add PMU node") Signed-off-by: Andre Przywara Link: https://patch.msgid.link/20260720215128.5761-1-andre.przywara@arm.com Signed-off-by: Chen-Yu Tsai Signed-off-by: Sasha Levin

ARM: dts: BCM5301X: EA9200: fix NVRAM size

2026-07-29T22:42:57+00:00

Fixes: [ 0.182121] WARNING: CPU: 0 PID: 1 at drivers/nvmem/brcm_nvram.c:85 brcm_nvram_probe+0x400/0x480 [ 0.182159] Unexpected (big) NVRAM size: 1056112 B Fixes: 90a77291ac09 ("ARM: dts: BCM5301X: R8000 add NVRAM with MAC address for WAN port") Signed-off-by: Rosen Penev Link: https://lore.kernel.org/r/20260628231049.1248899-1-rosenp@gmail.com Signed-off-by: Florian Fainelli

ARM: dts: BCM5301X: fix PCIe controller 2 second interrupt

2026-07-29T22:42:57+00:00

PCIe controller 2 has interrupts 0-4 mapping to GIC SPI 138-142. The mapping for interrupt 1 was incorrectly set to 138 due to a copy-paste error. Fix it to 139. Assisted-by: opencode:big-pickle Signed-off-by: Rosen Penev Link: https://lore.kernel.org/r/20260725215722.9323-1-rosenp@gmail.com Fixes: 3b3e35b279be ("ARM: dts: BCM5301X: Relicense AXI interrupts code to the GPL 2.0+ / MIT") Signed-off-by: Florian Fainelli

Merge tag 'soc-arm-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2026-06-17T18:28:10+00:00

Pull arm SoC code updates from Arnd Bergmann: "The largest addition here is the revived support for the ZTE ZX SoC platform, though this mostly documentation. The other changes are code cleanups that deal with continued conversion of the GPIO library away from GPIO numbers to descriptors and a few minor bugfixes" * tag 'soc-arm-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: Add Axiado reviewer and Maintainers ARM: remove the last few uses of do_bad_IRQ() ARM: imx31: Fix IIM mapping leak in revision check ARM: imx3: Fix CCM node reference leak ARM: orion5x: update board check in mss2_pci_init() to use the DT arm: mvebu_v5_defconfig: remove stale MACH_LINKSTATION_LSCHL reference ARM: mvebu: simplify of_node_put calls ARM: mvebu: drop unnecessary NULL check arm: boot: ep93xx: don't rely on machine_is_*() for removed board files ARM: zte: clean up zx297520v3 doc. warnings arm64: Kconfig: drop unneeded dependency on OF_GPIO for ARCH_MVEBU firmware: imx: sm-misc: Make scmi_imx_misc_ctrl_nb variable static ARM: zte: Add zx297520v3 platform support ARM: pxa: pxa27x: attach software node to its target GPIO controller ARM: pxa: pxa25x: attach software node to its target GPIO controller ARM: pxa: spitz: attach software nodes to their target GPIO controllers ARM: pxa: statify platform device definitions in spitz board file ARM: omap2: simplify allocation for omap_device ARM: select legacy gpiolib interfaces where used ARM: s3c: use gpio lookup table for LEDs

Merge tag 'soc-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2026-06-17T18:16:56+00:00

Pull SoC devicetree updates from Arnd Bergmann: "There are fewer devicetree updates this time that the last few ones, with five SoC types getting added: - Qualcomm Dragonwing IPQ9650 is a new wireless networking SoC using four Cortex-A55 and one Cortex-A78 core, which is a significant upgrade from older generations - ZTE zx297520v3 is an older low-end wireless SoC using a single Cortex-A53 core, which so far can only run 32-bit kernels. This brings back the ZX family of chips that was removed in 2021 after support for the original zx296702 and zx296718 chips was never completed. - Renesas R-Car M3Le (R8A779MD) is a variant of the R-Car M3-N (R8A77965) automotive SoC. - Apple t8122 (M3) is the 2023 generation of their laptop SoCs, which has now been reverse-engineered to the point of having initial kernel support for five laptop models. - ASPEED AST27xx is their first baseboard managment controller using a 64-bit core, the Cortex-A35, following earlier generations using ARMv5/v6/v7 CPUs. These all come with one or more initial boards, and in total there are 39 new boards getting added across SoC families, including: - Two NAS boxes using the old Cortina Systems Gemini SoC based on an ARMv4 FA526 CPU core - 18 industrial embedded boards using NXP i.MX6/8/9 and LX2160A SoCs from Variscite, Toradex and SolidRun, plus a number of overlays for combinations with additional boards - One new carrier board and SoM using TI K3 AM62x, in addition to new overlays for older SoMs - Two new boards using Spacemit K3 (no relation with TI) RISC-V SoCs. - Three phones from Google, Nothing and Motorola, all using Qualcomm Snapdragon SoCs - AST26xx BMC support for two server boards While there is still a significant number of patches improving hardware support for the existing boards across vendors (NXP, Qualcomm, Renesas, Rockchips, Mediatek, ...), a much smaller number of cleanups and warning fixes have made it in this time" * tag 'soc-dt-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (665 commits) arm64: dts: aspeed: Fix duplicate pinctrl labels and address scheme arm64: dts: bst: enable eMMC controller in C1200 dt-bindings: display/lvds-codec: add ti,sn65lvds93 arm64: dts: allwinner: a523: Add missing GPIO interrupt arm64: dts: lx2160a-rev2: avoid 32-bit pcie window system ram overlap arm64: dts: aspeed: Add initial AST27xx SoC device tree arm64: Kconfig: Add ASPEED SoC family Kconfig support dt-bindings: arm: aspeed: Add AST2700 board compatible arm64: dts: allwinner: a523: add gpadc node arm64: dts: allwinner: Add EL2 virtual timer interrupt ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node dt-bindings: media: sun6i-a31-isp: Add optional interconnect properties dt-bindings: media: sun6i-a31-csi: Add optional interconnect properties arm64: dts: imx{91,93}-phyboard-segin: Add peb-av-18 overlays arm64: dts: imx93-var-som-symphony: enable ADC arm64: dts: imx93-var-som-symphony: enable TPM3 PWM arm64: dts: imx93-var-som-symphony: keep RGB_SEL low arm64: dts: imx93-var-som-symphony: enable UART7 arm64: dts: imx93-var-som-symphony: add TPM support arm64: dts: imx91-var-som-symphony: fix RGB_SEL handling ...

Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2026-06-17T07:17:00+00:00

Pull networking updates from Jakub Kicinski: "Core & protocols: - Work on removing rtnl_lock protection throughout the stack continues. In this chapter: - don't use rtnl_lock for IPv6 multicast routing configuration - don't take rtnl_lock in ethtool for modern drivers - prepare Qdisc dump callbacks for rtnl_lock removal - Support dumping just ifindex + name of all interfaces, under RCU. It's a common operation for Netlink CLI tools (when translating names to ifindexes) and previously required full rtnl_lock. - Support dumping qdiscs and page pools for a specific netdev. Even tho user space wants a dump of all netdevs, most of the time, the OOO programming model results in repeating the dump for each netdev. Which, in absence of a cache, leads to a O(n^2) behavior. - Flush nexthops once on multi-nexthop removal (e.g. when device goes down), another O(n^2) -> O(n) improvement. - Rehash locally generated traffic to a different nexthop on retransmit timeout. - Honor oif when choosing nexthop for locally generated IPv6 traffic. - Convert TCP Auth Option to crypto library, and drop non-RFC algos. - Increase subflow limits in MPTCP to 64 and endpoint limit to 256. - Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need to selectively skip reporting of the standard TCP Timestamp option, because they won't fit into the header space together (12 + 30 > 40). - Support using bridge neighbor suppression, Duplicate Address Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN deployments, e.g. VXLAN fabrics (IPv4 and IPv6). - Improve link state reporting for upper netdevs (e.g. macvlan) over tunnel devices (again, mostly for EVPN deployments). - Support binding GENEVE tunnels to a local address. - Speed up UDP tunnel destruction (remove one synchronize_rcu()). - Support exponential field encoding in multicast (IGMPv3 and MLDv2). - Support attaching PSP crypto offload to containers (veth, netkit). - Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows migrating individual IPsec SAs independently of their policies. The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA migration, lacks SPI for unique SA identification, and cannot express reqid changes or migrate Transport mode selectors. The new interface identifies the SA via SPI and mark, supports reqid changes, address family changes, encap removal, and uses an atomic create+install flow under x->lock to prevent SN/IV reuse during AEAD SA migration. - Implement GRO/GSO support for PPPoE. - Convert sockopt callbacks in a number of protocols to iov_iter. Cross-tree stuff: - Remove support for Crypto TFM cloning (unblocked after the TCP Auth Option rework). This feature regressed performance for all crypto API users, since it changed crypto transformation objects into reference-counted objects. - Add FCrypt-PCBC implementation to rxrpc and remove it from the global crypto API as obsolete and insecure. Wireless: - Major rework of station bandwidth handling, fixing issues with lower capability than AP. - Cleanups for EMLSR spec issues (drafts differed). - More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast, schedule improvements, multi-station etc.) - Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work (e.g. non-primary channel access, UHR DBE support). - Fine Timing Measurement ranging (i.e. distance measurement) APIs. Netfilter: - Use per-rule hash initval in nf_conncount. This avoids unnecessary lock contention with short keys (e.g. conntrack zones) in different namespaces. - Various safety improvements, both in packet parsing and object lifetimes. Notably add refcounts to conntrack timeout policy. Deletions: - Remove TLS + sockmap integration. TLS wants to pin user pages to avoid a copy, and sockmap wants to write to the input stream. More work on this integration is clearly needed, and we can't find any users (original author admitted that they never deployed it). - Remove support for TLS offload with TCP Offload Engine (the far more common opportunistic offload is retained). The locking looks unfixable (driver sleeps under TCP spin locks) and people from the vendor that added this are AWOL. - Remove more ATM code, trying to leave behind only what PPPoATM needs, AAL5 and br2684 with permanent circuits. - Remove AppleTalk. Let it join hamradio in our out of tree protocol graveyard, I mean, repository. - Disable 32-bit x_tables compatibility (32bit binaries on 64bit kernel) interface in user namespaces. To be deleted completely, soon. - Remove 5/10 MHz support from cfg80211/mac80211. Drivers: - Software: - Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit) - bonding: add knob to strictly follow 802.3ad for link state - New drivers: - Alibaba Elastic Ethernet Adaptor (cloud vNIC). - NXP NETC switch within i.MX94. - DPLL: - Add operational state to pins (implement in zl3073x). - Add generic DPLL type, for daisy-chaining DPLLs (implement in ice). - Ethernet high-speed NICs: - Huawei (hinic3): - enhance tc flow offload support with queue selection, tunnels - nVidia/Mellanox: - avoid over-copying payload to the skb's linear part (up to 60% win for LRO on slow CPUs like ARM64 V2) - expose more per-queue stats over the standard API - support additional, unprivileged PFs in the DPU configuration - support Socket Direct (multi-PF) with switchdev offloads - add a pool / frag allocator for DMA mapped buffers for control objects, save memory on systems with 64kB page size - take advantage of the ability to dynamically change RSS table size, even when table is configured by the user - increase the max RSS table size for even traffic distribution - Ethernet NICs: - Marvell/Aquantia: - AQC113 PTP support - Realtek USB (r8152): - support 10Gbit Link Speeds and Energy-Efficient Ethernet (EEE) - support firmware loaded (for RTL8157/RTL8159) - support for the RTL8159 - Intel (ixgbe): - support Energy-Efficient Ethernet (EEE) on E610 devices - Ethernet switches: - Airoha: - support multiple netdevs on a single GDM block / port - Marvell (mv88e6xxx): - support SERDES of mv88e6321 - Microchip (ksz8/9): - rework the driver callbacks to remove one indirection layer - Motorcomm (yt921x): - support port rate policing - support TBF qdisc offload - support ACL/flower offload - nVidia/Mellanox: - expose per-PG rx_discards - Realtek: - rtl8365mb: bridge offloading and VLAN support - Ethernet PHYs: - Airoha: - support Airoha AN8801R Gigabit PHYs. - Micrel: - implement 3 low-loss cable tunables - Realtek: - support MDI swapping for RTL8226-CG - support MDIO for RTL931x - Qualcomm: - at803x: Rx and Tx clock management for IPQ5018 PHY - Motorcomm: - support YT8522 100M RMII PHY - set drive strength in YT8531s RGMII - TI: - dp83822: add optional external PHY clock - Bluetooth: - hci_sync: add support for HCI_LE_Set_Host_Feature [v2] - SMP: use AES-CMAC library API - Intel: - support Product level reset - support smart trigger dump - Mediatek: - add event filter to filter specific event - Realtek: - fix RTL8761B/BU broken LE extended scan - WiFi: - Broadcom (b43): - new support for a 11n device - MediaTek (mt76): - support mt7927 - mt792x: broken usb transport detection - mt7921: regulatory improvements - Qualcomm (ath9k): - GPIO interface improvements - Qualcomm (ath12k): - WDS support - replace dynamic memory allocation in WMI Rx path - thermal throttling/cooling device support - 6 GHz incumbent interference detection - channel 177 in 5 GHz - Realtek (rt89): - RTL8922AU support - USB 3 mode switch for performance - better monitor radiotap support - RTL8922DE preparations" * tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits) ipv4: fib_rule: Move fib4_rules_exit() to ->exit(). net: serialize netif_running() check in enqueue_to_backlog() net: skmsg: preserve sg.copy across SG transforms appletalk: move the protocol out of tree appletalk: stop storing per-interface state in struct net_device selftests/bpf: test that TLS crypto is rejected on a sockmap socket selftests/bpf: drop the unused kTLS program from test_sockmap selftests/bpf: remove sockmap + ktls tests tls: remove dead sockmap (psock) handling from the SW path tls: reject the combination of TLS and sockmap atm: remove orphaned uAPI for deleted drivers, protocols and SVCs atm: remove unused ATM PHY operations atm: remove the unused pre_send and send_bh device operations atm: remove the unused change_qos device operation atm: remove SVC socket support and the signaling daemon interface atm: remove the local ATM (NSAP) address registry atm: remove dead SONET PHY ioctls atm: remove the unused send_oam / push_oam callbacks atm: remove AAL3/4 transport support net: dsa: sja1105: fix lastused timestamp in flower stats ...

Merge tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev

2026-06-16T02:58:41+00:00

Pull fbdev updates from Helge Deller: "Beside the removal of the Hercules monochrome ISA graphics driver and the corresponding text console driver, there is just the typical maintanance with smaller driver fixes and cleanups: Removal of drivers: - Hercules monochrome ISA graphics adapter driver (Ethan Nelson-Moore) - Hercules mdacon console driver (Ethan Nelson-Moore) Changes affecting many drivers at once: - possible memory leak fixes in various drivers (Abdun Nihaal) - many conversions to use strscpy() (David Laight) - Use named initializers in drivers (Uwe Kleine-König) Code fixes: - fbcon: don't suspend/resume when vc is graphics mode (Lu Yao) - modedb: fix a possible UAF in fb_find_mode() (Tuo Li) - modedb: Fix entry for 1920x1080-60 mode (Steffen Persvold) - arm: Export acorndata_8x8 font symbol for bootloader (Helge Deller) - omap2: fix use-after-free in omapfb_mmap (Hongling Zeng) Cleanups: - pxa168fb: use devm_ioremap_resource() (Alberto Arostegui) - provice helpers for fb_set_var() and fb_blank() and fbcon updates (Thomas Zimmermann) - fbcon: Use correct type for vc_resize() return value (Jiacheng Yu) - chipsfb: add missing MODULE_DESCRIPTION() macro (Rahman Mahmutović) - sunxvr2500: replace printk with device-aware logging functions (Rahman Mahmutović) - sm712: Fix operator precedence in big_swap macro (Li RongQing) - imxfb: Use of_device_get_match_data() (Rosen Penev) - atmel_lcdfb: Use of_device_get_match_data() (Rosen Penev) Documentation fixes: - grvga: Fix CLUT register address offset in comment (Eduardo Silva) - omap/dss: Fix stale modedb.c path (Costa Shulyupin) - correct CONFIG_FB_TILEBLITTING macro name in #endif comment (Ethan Nelson-Moore)" * tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (43 commits) fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode fbdev: modedb: fix a possible UAF in fb_find_mode() fbdev: s3fb: Use strscpy() to copy strings into arrays fbdev: sm501fb: Fix buffer errors in OF binding code fbcon: correct CONFIG_FB_TILEBLITTING macro name in #endif comment fbdev/arm: Export acorndata_8x8 font symbol for bootloader fbdev: mmpfb: Use strscpy() to copy device name fbdev: sisfb: Replace strlen() strcpy() pair with strscpy() fbdev: rivafb: Use strscpy() to copy device name fbdev: cyber2000fb: Use strscpy() to copy device name fbdev: atmel_lcdfb: Use strscpy() to copy device name fbdev: Do not export fbcon from fbdev fbdev: Wrap fbcon updates from vga-switcheroo in helper fbdev: Wrap user-invoked calls to fb_blank() in helper fbdev: Wrap user-invoked calls to fb_set_var() in helper fbdev: omap2: fix use-after-free in omapfb_mmap docs: omap/dss: Fix stale modedb.c path fbdev: pxa168fb: use devm_ioremap_resource() for MMIO fbdev: grvga: Fix CLUT register address offset in comment fbdev: sunxvr2500: replace printk with device-aware logging functions ...