kernel/git/stable/linux.git/drivers/clk/qcom, branch linux-5.16.y

clk: qcom: gcc-msm8994: Fix gpll4 width

2022-04-08T12:06:29+00:00

[ Upstream commit 71021db1c532c2545ae53b9ee85b37b7154f51d4 ] The gpll4 postdiv is actually a div4, so make sure that Linux is aware of this. This fixes the following error messages: mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller") Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20220319174940.341137-1-konrad.dybcio@somainline.org Tested-by: Petr Vorel Reviewed-by: Petr Vorel Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: clk-rcg2: Update the frac table for pixel clock

2022-04-08T12:06:24+00:00

[ Upstream commit b527358cb4cd58a8279c9062b0786f1fab628fdc ] Support the new numerator and denominator for pixel clock on SM8350 and support rgb101010, RGB888 use cases on SM8450. Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks") Signed-off-by: Taniya Das Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220227175536.3131-2-tdas@codeaurora.org Signed-off-by: Sasha Levin

clk: qcom: clk-rcg2: Update logic to calculate D value for RCG

2022-04-08T12:06:24+00:00

[ Upstream commit 58922910add18583d5273c2edcdb9fd7bf4eca02 ] The display pixel clock has a requirement on certain newer platforms to support M/N as (2/3) and the final D value calculated results in underflow errors. As the current implementation does not check for D value is within the accepted range for a given M & N value. Update the logic to calculate the final D value based on the range. Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks") Signed-off-by: Taniya Das Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220227175536.3131-1-tdas@codeaurora.org Signed-off-by: Sasha Levin

clk: qcom: ipq8074: Use floor ops for SDCC1 clock

2022-04-08T12:06:22+00:00

[ Upstream commit b77d8306d84f83d1da68028a68c91da9c867b6f6 ] Use floor ops on SDCC1 APPS clock in order to round down selected clock frequency and avoid overclocking SD/eMMC cards. For example, currently HS200 cards were failling tuning as they were actually being clocked at 384MHz instead of 192MHz. This caused some boards to disable 1.8V I/O and force the eMMC into the standard HS mode (50MHz) and that appeared to work despite the eMMC being overclocked to 96Mhz in that case. There was a previous commit to use floor ops on SDCC clocks, but it looks to have only covered SDCC2 clock. Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks") Signed-off-by: Dirk Buchwalder Signed-off-by: Robert Marko Reviewed-by: Stephen Boyd Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220210173100.505128-1-robimarko@gmail.com Signed-off-by: Sasha Levin

clk: qcom: ipq8074: fix PCI-E clock oops

2022-04-08T12:06:22+00:00

[ Upstream commit bf8f5182b8f59309809b41c1d1730ed9ca6134b1 ] Fix PCI-E clock related kernel oops that are caused by a missing clock parent. pcie0_rchng_clk_src has num_parents set to 2 but only one parent is actually set via parent_hws, it should also have "XO" defined. This will cause the kernel to panic on a NULL pointer in clk_core_get_parent_by_index(). So, to fix this utilize clk_parent_data to provide gcc_xo_gpll0 parent data. Since there is already an existing static const char * const gcc_xo_gpll0[] used to provide the same parents via parent_names convert those users to clk_parent_data as well. Without this earlycon is needed to even catch the OOPS as it will reset the board before serial is initialized with the following: [ 0.232279] Unable to handle kernel paging request at virtual address 0000a00000000000 [ 0.232322] Mem abort info: [ 0.239094] ESR = 0x96000004 [ 0.241778] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.244908] SET = 0, FnV = 0 [ 0.250377] EA = 0, S1PTW = 0 [ 0.253236] FSC = 0x04: level 0 translation fault [ 0.256277] Data abort info: [ 0.261141] ISV = 0, ISS = 0x00000004 [ 0.264262] CM = 0, WnR = 0 [ 0.267820] [0000a00000000000] address between user and kernel address ranges [ 0.270954] Internal error: Oops: 96000004 [#1] SMP [ 0.278067] Modules linked in: [ 0.282751] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.10 #0 [ 0.285882] Hardware name: Xiaomi AX3600 (DT) [ 0.292043] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.296299] pc : clk_core_get_parent_by_index+0x68/0xec [ 0.303067] lr : __clk_register+0x1d8/0x820 [ 0.308273] sp : ffffffc01111b7d0 [ 0.312438] x29: ffffffc01111b7d0 x28: 0000000000000000 x27: 0000000000000040 [ 0.315919] x26: 0000000000000002 x25: 0000000000000000 x24: ffffff8000308800 [ 0.323037] x23: ffffff8000308850 x22: ffffff8000308880 x21: ffffff8000308828 [ 0.330155] x20: 0000000000000028 x19: ffffff8000309700 x18: 0000000000000020 [ 0.337272] x17: 000000005cc86990 x16: 0000000000000004 x15: ffffff80001d9d0a [ 0.344391] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000006 [ 0.351508] x11: 0000000000000003 x10: 0101010101010101 x9 : 0000000000000000 [ 0.358626] x8 : 7f7f7f7f7f7f7f7f x7 : 6468626f5e626266 x6 : 17000a3a403c1b06 [ 0.365744] x5 : 061b3c403a0a0017 x4 : 0000000000000000 x3 : 0000000000000001 [ 0.372863] x2 : 0000a00000000000 x1 : 0000000000000001 x0 : ffffff8000309700 [ 0.379982] Call trace: [ 0.387091] clk_core_get_parent_by_index+0x68/0xec [ 0.389351] __clk_register+0x1d8/0x820 [ 0.394210] devm_clk_hw_register+0x5c/0xe0 [ 0.398030] devm_clk_register_regmap+0x44/0x8c [ 0.402198] qcom_cc_really_probe+0x17c/0x1d0 [ 0.406711] qcom_cc_probe+0x34/0x44 [ 0.411224] gcc_ipq8074_probe+0x18/0x30 [ 0.414869] platform_probe+0x68/0xe0 [ 0.418776] really_probe.part.0+0x9c/0x30c [ 0.422336] __driver_probe_device+0x98/0x144 [ 0.426329] driver_probe_device+0x44/0x11c [ 0.430842] __device_attach_driver+0xb4/0x120 [ 0.434836] bus_for_each_drv+0x68/0xb0 [ 0.439349] __device_attach+0xb0/0x170 [ 0.443081] device_initial_probe+0x14/0x20 [ 0.446901] bus_probe_device+0x9c/0xa4 [ 0.451067] device_add+0x35c/0x834 [ 0.454886] of_device_add+0x54/0x64 [ 0.458360] of_platform_device_create_pdata+0xc0/0x100 [ 0.462181] of_platform_bus_create+0x114/0x370 [ 0.467128] of_platform_bus_create+0x15c/0x370 [ 0.471641] of_platform_populate+0x50/0xcc [ 0.476155] of_platform_default_populate_init+0xa8/0xc8 [ 0.480324] do_one_initcall+0x50/0x1b0 [ 0.485877] kernel_init_freeable+0x234/0x29c [ 0.489436] kernel_init+0x24/0x120 [ 0.493948] ret_from_fork+0x10/0x20 [ 0.497253] Code: d50323bf d65f03c0 f94002a2 b4000302 (f9400042) [ 0.501079] ---[ end trace 4ca7e1129da2abce ]--- Fixes: f0cfcf1a ("clk: qcom: ipq8074: Add missing clocks for pcie") Signed-off-by: Robert Marko Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20211220114119.465247-1-robimarko@gmail.com Signed-off-by: Sasha Levin

clk: qcom: dispcc: Update the transition delay for MDSS GDSC

2022-03-16T13:26:40+00:00

[ Upstream commit 6e6fec3f961c00ca34ffb4bf2ad9febb4b499f8d ] On SC7180 we observe black screens because the gdsc is being enabled/disabled very rapidly and the GDSC FSM state does not work as expected. This is due to the fact that the GDSC reset value is being updated from SW. The recommended transition delay for mdss core gdsc updated for SC7180/SC7280/SM8250. Fixes: dd3d06622138 ("clk: qcom: Add display clock controller driver for SC7180") Fixes: 1a00c962f9cd ("clk: qcom: Add display clock controller driver for SC7280") Fixes: 80a18f4a8567 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250") Signed-off-by: Taniya Das Link: https://lore.kernel.org/r/20220223185606.3941-2-tdas@codeaurora.org Reviewed-by: Bjorn Andersson [sboyd@kernel.org: lowercase hex] Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: gdsc: Add support to update GDSC transition delay

2022-03-16T13:26:40+00:00

[ Upstream commit 4e7c4d3652f96f41179aab3ff53025c7a550d689 ] GDSCs have multiple transition delays which are used for the GDSC FSM states. Older targets/designs required these values to be updated from gdsc code to certain default values for the FSM state to work as expected. But on the newer targets/designs the values updated from the GDSC driver can hamper the FSM state to not work as expected. On SC7180 we observe black screens because the gdsc is being enabled/disabled very rapidly and the GDSC FSM state does not work as expected. This is due to the fact that the GDSC reset value is being updated from SW. Thus add support to update the transition delay from the clock controller gdscs as required. Fixes: 45dd0e55317cc ("clk: qcom: Add support for GDSCs) Signed-off-by: Taniya Das Link: https://lore.kernel.org/r/20220223185606.3941-1-tdas@codeaurora.org Reviewed-by: Bjorn Andersson Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: gcc-msm8994: Remove NoC clocks

2022-03-02T10:51:01+00:00

commit 3494894afff4ad11f25d8342cc99699be496d082 upstream. Just like in commit 05cf3ec00d46 ("clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk") adding NoC clocks turned out to be a huge mistake, as they cause a lot of issues at little benefit (basically letting Linux know about their children's frequencies), especially when mishandled or misconfigured. Adding these ones broke SDCC approx 99 out of 100 times, but that somehow went unnoticed. To prevent further issues like this one, remove them. This commit is effectively a revert of 74a33fac3aab ("clk: qcom: gcc-msm8994: Add missing NoC clocks") with ABI preservation. Fixes: 74a33fac3aab ("clk: qcom: gcc-msm8994: Add missing NoC clocks") Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20220217232408.78932-1-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman

clk: qcom: gcc-sc7280: Mark gcc_cfg_noc_lpass_clk always enabled

2022-01-27T11:02:10+00:00

[ Upstream commit 9c337073d9d81a145434b22f42dc3128ecd17730 ] The gcc cfg noc lpass clock is required to be always enabled for the LPASS core and audio drivers to be functional. Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280") Signed-off-by: Taniya Das Link: https://lore.kernel.org/r/1640018638-19436-4-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: sm6125-gcc: Swap ops of ice and apps on sdcc1

2021-12-06T22:40:38+00:00

Without this change eMMC runs at overclocked freq. Swap the ops to not OC the eMMC. Signed-off-by: Martin Botka Link: https://lore.kernel.org/r/20211130212015.25232-1-martin.botka@somainline.org Reviewed-by: Bjorn Andersson Fixes: 4b8d6ae57cdf ("clk: qcom: Add SM6125 (TRINKET) GCC driver") Signed-off-by: Stephen Boyd