kernel/git/stable/linux.git/drivers/iio/accel, branch linux-5.3.y

iio: fix center temperature of bmc150-accel-core

2019-11-06T12:07:44+00:00

[ Upstream commit 6c59a962e081df6d8fe43325bbfabec57e0d4751 ] The center temperature of the supported devices stored in the constant BMC150_ACCEL_TEMP_CENTER_VAL is not 24 degrees but 23 degrees. It seems that some datasheets were inconsistent on this value leading to the error. For most usecases will only make minor difference so not queued for stable. Signed-off-by: Pascal Bouwmann Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: accel: adxl372: Perform a reset at start up

2019-10-17T20:47:04+00:00

commit d9a997bd4d762d5bd8cc548d762902f58b5e0a74 upstream. We need to perform a reset a start up to make sure that the chip is in a consistent state. This reset also disables all the interrupts which should only be enabled together with the iio buffer. Not doing this, was sometimes causing unwanted interrupts to trigger. Signed-off-by: Stefan Popa Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support") Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: accel: adxl372: Fix push to buffers lost samples

2019-10-17T20:47:03+00:00

commit 62df81b74393079debf04961c48cb22268fc5fab upstream. One in two sample sets was lost by multiplying fifo_set_size with sizeof(u16). Also, the double number of available samples were pushed to the iio buffers. Signed-off-by: Stefan Popa Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support") Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: accel: adxl372: Fix/remove limitation for FIFO samples

2019-10-17T20:47:03+00:00

commit d202ce4787e446556c6b9d01f84734c3f8174ba3 upstream. Currently, the driver sets the FIFO_SAMPLES register with the number of sample sets (maximum of 170 for 3 axis data, 256 for 2-axis and 512 for single axis). However, the FIFO_SAMPLES register should store the number of samples, regardless of how the FIFO format is configured. Signed-off-by: Stefan Popa Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support") Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: cros_ec_accel_legacy: Fix incorrect channel setting

2019-07-14T16:50:11+00:00

INFO_SCALE is set both for each channel and all channels. iio is using all channel setting, so the error was not user visible. Signed-off-by: Gwendal Grignou Cc: Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2019-07-01T08:58:13+00:00

Jonathan writes: Second set of IIO device support, features, cleanups and minor fixes for 5.3. A few bits for the counters subsystem mixed in here as well. There are some late breaking fixes as well, which aren't so urgent they can't wait for the merge window. New Device Support * adf4371 - New driver + bindings. - Support the adf4372 PLL. Mostly ID and bindings. * ad8366 (note includes rework of driver needed to allow support for these). - Support the ADL5240 variable gain amplifier (VGA). - Support the ADA4961 digital gain amplifier (DGA). * dps310 - New driver, in several parts from different authors for this temp and pressure sensor. - Includes errata workaround for a temperature reading issue. * stk3310 - Support the stk3335, mostly ID. Features and cleanups * core - drop error handling on debugfs registration. - harden by making sure we don't overrun iio_chan_info_postfix. * docs - convert remaining docs to rst. At somepoint we'll fit these few into the main IIO docs. - improve sampling_frequency_available docs but explaining the range form. * ad_sigma_delta - Drop a pointless goto. * ad2s1210 - Drop pointless platform data null check seeing as we don't actually use platform data anymore. * ad7124 - Relax limitation on channel numbers to allow pseudo different channels. - Support control of whether the input is buffered via DT. - Use dynamic allocation for channel configuration to make it easier to support new devices. - YAML binding conversion. * ad7150 - Comment tidy up. - Consistent and simple if (ret) handling of i2c errors. - FIELD_GET and GENMASK. - Ternary rather than !!(condition) for readability. - Use macros to avoid repetition of channel definitions. * ad7606 - Add software channel config (rather that pin controlled) - Refactor to simplify addition of new part in future. * ad7746 - of_deivce_id table. * ad7780 - MAINTAINERS entry - YAML DT bindings. * ad8366 - Stop using core mlock in favour of well scoped local lock. - SPDX + copyright date update. * ad9834 - of_device_id table * adf4371 - Add support for output stage muting before lock on has occured. * adis library - MAINTAINERS entry to reflect that this now Alexandru's problem ;) * adis162xx: - Fix a slightly incorrect set of comments and print statements on minimum supported voltage. * adis16203 - of_device_id table. * adis16240 - Add of_device_id table (in two parts as first patch only used it for MODULE_DEVICE_TABLE.) * adt7316-spi - of_device_id table * adxl372 - YAML DT binding conversion. - Cleanup use of buffer callback functions (precursor to core rework). * bh1710 - Simplify getting the i2c adapter from the client. * dht11 - Mote to newer GPIO consumer interface. * kxcjk-1013.c - Add binding for sensor in display of some ultrabooks after userspace tools updated for it not be a problem to report two similar sensors. * imx7d - drop unused variables. - white space - define instead of variable for clock frequency that is fixed. - drop pointless error message. * messon_saradc - SPDX * sps30 - MAINTAINERS entry - YAML binding conversion. * st_accel - Tidy up ordering in various buffer related callbacks. This is part of a long running effort to simplify the core code. * stm32-dfsdm: - Manage the resolution cleanly in triggerd modes. - Add fast mode support which allows more flexible filter choices. - Add a comment on the reason for a 16 bit record when technically not 'required'. * st_lsm6dsx - Embed device name in the sensor_settings struct as i3c doesn't have a convenient name field to use for this. * xilinx-adc - Relax constraints on supported platforms to reflect that this can used with FPGAs on PCIe cards and hence many architectures. * counters/ftm-quaddec - Fix some formatting io MODULE_AUTHOR - MAINTAINERS entry Fixes * tools - fix incorrect handling of 32 bit channels. * sca3000 - Potential endian bug that is unlikely to bite anyone (be64 host seems unlikely for this old part). * stm32-adc - Add vdda-supply. On some boards it needs to be turned on to supply the ADC. DT bindings included. * stm32-dfsdm - Fix output resolution to work with filter orders other than 3. - Fix output datatype as it's signed and previously claimed not to be. * tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits) iio: iio-utils: Fix possible incorrect mask calculation iio: frequency: adf4371: Add support for output stage mute dt-bindings: iio: frequency: Add ADF4372 PLL documentation iio: frequency: adf4371: Add support for ADF4372 PLL dt-bindings: iio: adc: Add buffered input property Convert AD7124 bindings documentation to YAML format. iio: adc: ad7124: Shift to dynamic allocation for channel configuration iio: adc: ad7124: Add buffered input support iio: adc: ad7124: Remove input number limitation MAINTAINERS: add ADIS IMU driver library entry iio: adis162xx: fix low-power docs & reports counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR iio: core: no need to check return value of debugfs_create functions docs: iio: convert to ReST iio: adc: stm32-adc: add missing vdda-supply dt-bindings: iio: adc: stm32: add missing vdda supply iio: adc: stm32-dfsdm: add comment for 16 bits record iio: adc: stm32-dfsdm: add fast mode support iio: adc: stm32-dfsdm: manage data resolution in trigger mode iio: adc: stm32-dfsdm: fix data type ...

iio: adis162xx: fix low-power docs & reports

2019-06-26T20:24:20+00:00

All current ADIS162XX drivers have incorrect values defined via comments. Also, when an error is reported the printed value is incorrect. The functionality itself isn't affected, so it's not a critical issue. And since the change is trivial, it was included in a single patch that fixes these in one go. All values were correlated with the ones specified in the data-sheets. Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

Merge 5.2-rc6 into staging-next

2019-06-23T11:29:03+00:00

We want the fixes and this resolves a merge issue as well. Signed-off-by: Greg Kroah-Hartman

iio: sca3000: Potential endian bug in sca3000_read_event_value()

2019-06-22T08:40:36+00:00

The problem is that "ret" is an int but we're casting it as "(unsigned long *)&ret" when we do the for_each_set_bit() loop. This will not work on big endian 64 bit systems. Signed-off-by: Dan Carpenter Signed-off-by: Jonathan Cameron

iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions

2019-06-22T08:24:41+00:00

The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions. For the predisable hook, the disable code should occur before detaching the poll func, and for the postenable hook, the poll func should be attached before the enable code. Signed-off-by: Alexandru Ardelean Acked-by: Denis Ciocca Signed-off-by: Jonathan Cameron