kernel/git/stable/linux.git/drivers/iio/common, branch linux-4.19.y

iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()

2024-11-08T15:19:19+00:00

commit 3a29b84cf7fbf912a6ab1b9c886746f02b74ea25 upstream. If hid_sensor_set_report_latency() fails, the error code should be returned instead of a value likely to be interpreted as 'success'. Fixes: 138bc7969c24 ("iio: hid-sensor-hub: Implement batch mode") Signed-off-by: Christophe JAILLET Acked-by: Srinivas Pandruvada Link: https://patch.msgid.link/c50640665f091a04086e5092cf50f73f2055107a.1727980825.git.christophe.jaillet@wanadoo.fr Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table

2024-01-08T10:27:35+00:00

commit 54cf39ec16335dadbe1ba008d8e5e98dae3e26f8 upstream. The HTU21 offers 4 sampling frequencies: 20, 40, 70 and 120, which are associated to an index that is used to select the right measurement resolution and its corresponding measurement time. The current implementation selects the measurement resolution and the temperature measurement time properly, but it does not select the right humidity measurement time in all cases. In summary, the 40 and 70 humidity measurement times are swapped. The reason for that is probably the unusual coding for the measurement resolution. According to the datasheet, the bits [7,0] of the "user register" are used as follows to select the bit resolution: -------------------------------------------------- | Bit 7 | Bit 0 | RH | Temp | Trh (us) | Tt (us) | -------------------------------------------------- | 0 | 0 | 12 | 14 | 16000 | 50000 | -------------------------------------------------- | 0 | 1 | 8 | 12 | 3000 | 13000 | -------------------------------------------------- | 1 | 0 | 10 | 13 | 5000 | 25000 | -------------------------------------------------- | 1 | 1 | 11 | 11 | 8000 | 7000 | -------------------------------------------------- *This table is available in the official datasheet, page 13/21. I have just appended the times provided in the humidity/temperature tables, pages 3/21, 5/21. Note that always a pair of resolutions is selected. The sampling frequencies [20, 40, 70, 120] are assigned to a linear index [0..3] which is then coded as follows [1]: Index [7,0] -------------- idx 0 0,0 idx 1 1,0 idx 2 0,1 idx 3 1,1 That is done that way because the temperature measurements are being used as the reference for the sampling frequency (the frequencies and the temperature measurement times are correlated), so increasing the index always reduces the temperature measurement time and its resolution. Therefore, the temperature measurement time array is as simple as [50000, 25000, 13000, 7000] On the other hand, the humidity resolution cannot follow the same pattern because of the way it is coded in the "user register", where both resolutions are selected at the same time. The humidity measurement time array is the following: [16000, 3000, 5000, 8000], which defines the following assignments: Index [7,0] Trh ----------------------- idx 0 0,0 16000 -> right, [0,0] selects 12 bits (Trh = 16000) idx 1 1,0 3000 -> wrong! [1,0] selects 10 bits (Trh = 5000) idx 2 0,1 5000 -> wrong! [0,1] selects 8 bits (Trh = 3000) idx 3 1,1 8000 -> right, [1,1] selects 11 bits (Trh = 8000) The times have been ordered as if idx = 1 -> [0,1] and idx = 2 -> [1,0], which is not the case for the reason explained above. So a simple modification is required to obtain the right humidity measurement time array, swapping the values in the positions 1 and 2. The right table should be the following: [16000, 5000, 3000, 8000] Fix the humidity measurement time array with the right idex/value coding. [1] The actual code that makes this coding and assigns it to the current value of the "user register" is the following: config_reg &= 0x7E; config_reg |= ((i & 1) << 7) + ((i & 2) >> 1); Fixes: d574a87cc311 ("Add meas-spec sensors common part") Signed-off-by: Javier Carrasco Link: https://lore.kernel.org/r/20231026-topic-htu21_conversion_time-v1-1-bd257dc44209@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: cros_ec: Fix the allocation size for cros_ec_command

2023-08-16T16:13:00+00:00

commit 8a4629055ef55177b5b63dab1ecce676bd8cccdd upstream. The struct cros_ec_command contains several integer fields and a trailing array. An allocation size neglecting the integer fields can lead to buffer overrun. Reviewed-by: Tzung-Bi Shih Signed-off-by: Yiyuan Guo Fixes: 974e6f02e27e ("iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.") Link: https://lore.kernel.org/r/20230630143719.1513906-1-yguoaz@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: ssp_sensors: fix error code in ssp_print_mcu_debug()

2021-10-20T09:23:03+00:00

commit 4170d3dd1467e9d78cb9af374b19357dc324b328 upstream. The ssp_print_mcu_debug() function should return negative error codes on error. Returning "length" is meaningless. This change does not affect runtime because the callers only care about zero/non-zero. Reported-by: Jonathan Cameron Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210914105333.GA11657@kili Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: ssp_sensors: add more range checking in ssp_parse_dataframe()

2021-10-20T09:23:03+00:00

commit 8167c9a375ccceed19048ad9d68cb2d02ed276e0 upstream. The "idx" is validated at the start of the loop but it gets incremented during the iteration so it needs to be checked again. Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210909091336.GA26312@kili Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: st_sensors: rely on odr mask to know if odr can be set

2020-04-29T14:31:24+00:00

commit e450e07c14abae563ad13b064cbce9fdccc6bc8d upstream. Indeed, relying on addr being not 0 cannot work because some device have their register to set odr at address 0. As a matter of fact, if the odr can be set, then there is a mask. Sensors with ODR register at address 0 are: lsm303dlh, lsm303dlhc, lsm303dlm Fixes: 7d245172675a ("iio: common: st_sensors: check odr address value in st_sensors_set_odr()") Signed-off-by: Lary Gibaud Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: common: ssp_sensors: Initialize calculated_time in ssp_common_process_data

2019-05-31T13:46:25+00:00

[ Upstream commit 6f9ca1d3eb74b81f811a87002de2d51640d135b1 ] When building with -Wsometimes-uninitialized, Clang warns: drivers/iio/common/ssp_sensors/ssp_iio.c:95:6: warning: variable 'calculated_time' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] While it isn't wrong, this will never be a problem because iio_push_to_buffers_with_timestamp only uses calculated_time on the same condition that it is assigned (when scan_timestamp is not zero). While iio_push_to_buffers_with_timestamp is marked as inline, Clang does inlining in the optimization stage, which happens after the semantic analysis phase (plus inline is merely a hint to the compiler). Fix this by just zero initializing calculated_time. Link: https://github.com/ClangBuiltLinux/linux/issues/394 Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: cros_ec: Fix the maths for gyro scale calculation

2019-04-27T07:36:34+00:00

commit 3d02d7082e5823598090530c3988a35f69689943 upstream. Calculation did not use IIO_DEGREE_TO_RAD and implemented a variant to avoid precision loss as we aim a nano value. The offset added to avoid rounding error, though, doesn't give us a close result to the expected value. E.g. For 1000dps, the result should be: (1000 * pi ) / 180 >> 15 ~= 0.000532632218 But with current calculation we get $ cat scale 0.000547890 Fix the calculation by just doing the maths involved for a nano value val * pi * 10e12 / (180 * 2^15) so we get a closer result. $ cat scale 0.000532632 Fixes: c14dca07a31d ("iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver") Signed-off-by: Gwendal Grignou Signed-off-by: Enric Balletbo i Serra Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: change strncpy+truncation to strlcpy

2018-07-15T10:38:06+00:00

Generated by scripts/coccinelle/misc/strncpy_truncation.cocci Signed-off-by: Dominique Martinet Signed-off-by: Jonathan Cameron

Merge tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2018-06-09T17:32:39+00:00

Pull staging/IIO updates from Greg KH: "Here is the big staging and IIO driver update for 4.18-rc1. It was delayed as I wanted to make sure the final driver deletions did not cause any major merge issues, and all now looks good. There are a lot of patches here, just over 1000. The diffstat summary shows the major changes here: 1007 files changed, 16828 insertions(+), 227770 deletions(-) Because of this, we might be close to shrinking the overall kernel source code size for two releases in a row. There was loads of work in this release cycle, primarily: - tons of ks7010 driver cleanups - lots of mt7621 driver fixes and cleanups - most driver cleanups - wilc1000 fixes and cleanups - lots and lots of IIO driver cleanups and new additions - debugfs cleanups for all staging drivers - lots of other staging driver cleanups and fixes, the shortlog has the full details. but the big user-visable things here are the removal of 3 chunks of code: - ncpfs and ipx were removed on schedule, no one has cared about this code since it moved to staging last year, and if it needs to come back, it can be reverted. - lustre file system is removed. I've ranted at the lustre developers about once a year for the past 5 years, with no real forward progress at all to clean things up and get the code into the "real" part of the kernel. Given that the lustre developers continue to work on an external tree and try to port those changes to the in-kernel tree every once in a while, this whole thing really really is not working out at all. So I'm deleting it so that the developers can spend the time working in their out-of-tree location and get things cleaned up properly to get merged into the tree correctly at a later date. Because of these file removals, you will have merge issues on some of these files (2 in the ipx code, 1 in the ncpfs code, and 1 in the atomisp driver). Just delete those files, it's a simple merge :) All of this has been in linux-next for a while with no reported problems" * tag 'staging-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1011 commits) staging: ipx: delete it from the tree ncpfs: remove uapi .h files ncpfs: remove Documentation ncpfs: remove compat functionality staging: ncpfs: delete it staging: lustre: delete the filesystem from the tree. staging: vc04_services: no need to save the log debufs dentries staging: vc04_services: vchiq_debugfs_log_entry can be a void * staging: vc04_services: remove struct vchiq_debugfs_info staging: vc04_services: move client dbg directory into static variable staging: vc04_services: remove odd vchiq_debugfs_top() wrapper staging: vc04_services: no need to check debugfs return values staging: mt7621-gpio: reorder includes alphabetically staging: mt7621-gpio: change gc_map to don't use pointers staging: mt7621-gpio: use GPIOF_DIR_OUT and GPIOF_DIR_IN macros instead of custom values staging: mt7621-gpio: change 'to_mediatek_gpio' to make just a one line return staging: mt7621-gpio: dt-bindings: update documentation for #interrupt-cells property staging: mt7621-gpio: update #interrupt-cells for the gpio node staging: mt7621-gpio: dt-bindings: complete documentation for the gpio staging: mt7621-dts: add missing properties to gpio node ...