kernel/git/stable/linux.git/drivers/iio/light, branch linux-4.7.y

iio: light apds9960: Add the missing dev.parent

2016-06-03T11:54:51+00:00

Without this, the iio:deviceX is missing in the /sys/bus/i2c/devices/0-0039 Some userspace tools use this path to identify a specific instance of the device. Signed-off-by: Yong Li Reviewed-By: Matt Ranostay Cc: Signed-off-by: Jonathan Cameron

iio: light: bh1780: assign a static name

2016-05-29T18:51:29+00:00

Using the struct i2c_device->id field for naming the light sensor is a bad idea: when booting from the pure device tree this is NULL and that causes the device not to have the "name" property in sysfs and that in turn confuses the "lsiio" command to stop listing devices. So instead of using the device .id, use the hard string "bh1780", which works just fine. Fixes: 1f0477f18306 ("iio: light: new driver for the ROHM BH1780") Signed-off-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron

iio: bh1780: dereference the client properly

2016-05-29T18:50:56+00:00

The code in runtime_[suspend|resume] was assuming that the i2c client data was the bh1780 state container, but it contains the IIO device. So first dereference the IIO device from the i2c client, then get the state container using the iio_priv() call. Fixes: 1f0477f18306 ("iio: light: new driver for the ROHM BH1780") Signed-off-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron

max44000: Remove scale from proximity

2016-05-21T19:21:17+00:00

This is not implemented and doesn't really make sense because IIO proximity is unit-less. Remove IIO_CHAN_INFO_SCALE from info_mask because so that the _scale sysfs entry won't appear. This fixes userspace tools like generic_buffer which abort when reads returns an error. Signed-off-by: Crestez Dan Leonard Signed-off-by: Jonathan Cameron

iio: light: bh1780: return after write

2016-05-04T09:53:51+00:00

When writing a value using direct reg access from debugfs we need to return and not fall through to reading the value, lest we'll dereference a NULL pointer. Cc: Dan Carpenter Reported-by: Dan Carpenter Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-4.7b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing

2016-04-26T22:07:23+00:00

Jonathan writes: 2nd set of new device support, features and cleanup for IIO in the 4.7 cycle. Bit of a bumper set for new drivers but plenty of other stuff here as well! New device support * ad5592R ADC/DAC - new driver supporting ad5592r and ad5593r combined ADC/DAC and gpio chips. * Aosong am2315 relative humidity - new driver with triggered buffer support in follow up patch. * bmi160 imu - new driver * bmp280 - bmp180 support - note there is support in the misc/bmp085 driver. Intent is to remove that driver long term. * invensense mpu6050 - cleanup leading to explicit support of mpu9150 with a good few cleanups along the way. * Hope RF hp03 pressure and temperature sensor. - new driver * maxim DS1803 potentiometer - new driver * maxim max44000 light and proximity sensor - new driver built in a series of steps to support pretty much everything. * ROHM BH1780 light sensor - new driver. There is an existing driver in misc that this is pretty much intended to replace. The discussion on whether to support the non standard interface of that driver is some way is continuing. * st-gyro - lsm9ds0-gyro. The accel/magn side of this will take a while longer as extensions to the st library are needed for cases where two types of sensor share a single i2c address. * ti-adc081c - support the adc101c and adc121c * Vishay VEML6070 UV sensor - new driver. New features * core - devm_ APIs for channel_get and channel_get_all. The first user of these is the generic ADC based thermal driver. As it is going through the thermal tree these will be picked up as a patch to that next cycle as that is how the author preferred to do it. - mounting matrix support. This new core support allows devices to provide to userspace (typically from the device tree) allowing compensation for how the sensor is mounted on the device. First examples are on UAVs but it has a more mundane use on typical phone where the chip may be on the front or the back of the circuit board and soldered at any angle. Includes support for this ABI in ak8975 (which has an older interface, now deprecated) and mpu6050. * tools - add a -a option to enable all available channels in generic_buffer sample. Makes it somewhat easier to use. * adis library and drivers - support manual self test flag clearing. This has technically been broken for a very long time - result is an offset on readings as the applied field is on all the time. * ak8975 - triggered buffer support * bmc150 - spi support (including splitting the driver into core and i2c parts) * bmp280 - oversampling support. * dht11 - improved logging - useful to debug timing issues on this quirky device. * st-sensors - read each channel invidivually as not all support the optimization of reading in bulk. This is technically a fix, but will need to be backported if desired. - support open drain and shared interrupts. * ti-adc081c - triggered buffer support. Cleanups * inkern - white space fix. * ad7606 - use the iio_device_claim_direct_mode call rather than open coding equiv. * ad799x - white space fix. * ad9523 - unsigned -> unsigned int * apds9660 - brace location tidying up. - silence an uninitialized variable warning. * ak8975 - else and brace on same line fix. * at91_adc - white space fixes. * bmc150 - use regmap stored copy of the device pointer rather than having an additional copy. * bmg160 - use regmap stored copy of the device pointer rather than having an additional copy. * hid-sensors - white space fixes. * mcp3422 - white space fix. * mma7455 - use regmap to retrieve the device struct rather than carrying another copy in the private data. * ms_sensors - white space fix. * mxs-lradc - move current bindings out of staging - some will be shortly deprecated but the reality is that we have device trees out there using them so they will need to be supported for some time. They accidentally got left behind when the driver graduated from staging. - white space cleanup. - set INPUT_PROP_DIRECT. - move ts config into a better function. - move the STMP reset out of the ADC init. * vf610_adc - case label indenting fix.

max44000: Initial triggered buffer support

2016-04-24T09:24:08+00:00

Signed-off-by: Crestez Dan Leonard Signed-off-by: Jonathan Cameron

max44000: Expose ambient sensor scaling

2016-04-24T09:23:02+00:00

This patch exposes ALSTIM as illuminance_integration_time and ALSPGA as illuminance_scale. Changing ALSTIM also changes the number of bits available in the data register. This is handled inside raw value reading because: * It's very easy to shift a few bits * It allows SCALE and INT_TIME to be completely independent controls * Buffer support requires constant scan_type.realbits per-channel Signed-off-by: Crestez Dan Leonard Signed-off-by: Jonathan Cameron

max44000: Support controlling LED current output

2016-04-24T09:21:32+00:00

This is exposed as an output channel with "led" as an extend_name. Other sensors also have support for controlling an external LED. It's not clear that simply exposing an undecorated output channel is the correct approach. Signed-off-by: Crestez Dan Leonard Signed-off-by: Jonathan Cameron

max44000: Initial support for proximity reading

2016-04-24T09:12:15+00:00

The proximity sensor relies on sending pulses to an external IR led and it is disabled by default on powerup. The driver will enable it with a default power setting. Signed-off-by: Crestez Dan Leonard Signed-off-by: Jonathan Cameron