kernel/git/stable/linux.git/drivers/irqchip, branch linux-rolling-lts

Revert "irqchip/mbigen: Fix mbigen node address layout"

2026-09-11T09:49:15+00:00

commit e67091609cf85962f64391c1b0f93d4cbfcd4e22 upstream. This reverts commit 6be6cba9c4371d27f78d900ccfe34bb880d9ee20. Commit 6be6cba9c437 ("irqchip/mbigen: Fix mbigen node address layout") appears to cause a regression on Hi1616. On-board hns NIC has two ports, enahisic2i0 and enahisic2i1, both behind mbigen-v2. Port 0 works; port 1 cannot pass any traffic. Their interrupt pins fall on different mbigen nodes: enahisic2i0: pins 1152-1198 -> all in node 9 enahisic2i1: pins 1200-1246 -> node 9 (1200-1215) + node 10 (1216-1246) (nid = (hwirq - 64) / 128 + 1; pin 1215 = node 9, pin 1216 = node 10) /proc/interrupts shows the break happens exactly at the node boundary: enahisic2i1-rx0 pin 1200 count 102 <- node 9 enahisic2i1-rx5 pin 1215 count 1 <- node 9, last pin enahisic2i1-tx5 pin 1216 count 0 <- node 10, first pin enahisic2i1-rx6 pin 1218 count 0 <- node 10 ...all node 10 pins stay at zero. Port 0 (entirely node 9) is unaffected. Reverting the commit restores normal operation. The commit assumes CLEAR occupies a full 4 KB page at [0xa000, 0xb000) and collides with node 10, so node 10+ gets shifted by 0x1000. But get_mbigen_clear_reg() uses flat, chip-wide addressing -- it never multiplies by the node ID: *addr = (hwirq / 32) * 4 + REG_MBIGEN_CLEAR_OFFSET; /* 0xa000 */ Over the valid hwirq range [64, 1407], CLEAR only spans 0xa008-0xa0af (168 bytes). Node 10's registers are: TYPE: 0xa000-0xa00f (16 B) overlaps CLEAR by 8 B (0xa008-0xa00f) VEC: 0xa200-0xa3ff (512 B) no overlap with CLEAR Shifting the whole page moves VEC from 0xa200 to 0xb200. The hardware reads the event ID from the fixed silicon address 0xa200 on interrupt firing, but software wrote it to 0xb200 -- so the hardware gets an uninitialised value and the interrupt is lost. The only real overlap is 8 bytes of TYPE. It can only trigger when a single mbigen instance has devices on both node 1 (CLEAR 0xa008) and node 10 (TYPE 0xa008). On Hi1616 those nodes are on separate mbigen instances, so it never triggers. Fixes: 6be6cba9c4371d27f78d900ccfe34bb880d9ee20 ("irqchip/mbigen: Fix mbigen node address layout") Suggested-by: Marc Zyngier Signed-off-by: caina Signed-off-by: Thomas Gleixner Acked-by: Yipeng Zou Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260821091720.16665-1-caina@uniontech.com Signed-off-by: Greg Kroah-Hartman

irqchip/stm32mp-exti: Fix the unit of the hwspinlock timeout

2026-09-11T09:49:12+00:00

commit d31fbbade43f880b7e59e2b3a72722fe2725d93f upstream. HWSPNLCK_TIMEOUT is passed to hwspin_lock_timeout_in_atomic(), whose timeout argument is in milliseconds, not microseconds: atomic_delay += HWSPINLOCK_RETRY_DELAY_US; if (atomic_delay > to * 1000) return -ETIMEDOUT; So stm32mp_exti_set_type() asks for a 1 second timeout where the comment next to the macro says it wants 1 millisecond. The semaphore is polled with udelay() from a section that holds chip_data->rlock, a raw_spinlock_t, so preemption stays disabled for the whole wait on every configuration, PREEMPT_RT included. The hwspinlock core documents this explicitly: If the mode is HWLOCK_IN_ATOMIC (called from an atomic context) the timeout is handled with busy-waiting delays, hence shall not exceed few msecs. Fixes: 5257169ade8c ("irqchip/stm32-exti: Use the hwspin_lock_timeout_in_atomic() API") Signed-off-by: Ju Nan Signed-off-by: Thomas Gleixner Reviewed-by: Radu Rendec Reviewed-by: Antonio Borneo Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260821024756.24927-2-junan76@163.com Signed-off-by: Greg Kroah-Hartman

irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure

2026-07-24T14:17:15+00:00

commit 1358126fbed104e5657955d3ba029b283687ba02 upstream. imsic_early_acpi_init() allocates a firmware node before setting up the IMSIC state. If imsic_setup_state() fails, the function returns without freeing the allocated fwnode. Free the fwnode and clear the global pointer on this error path, matching the cleanup already done when imsic_early_probe() fails. [ tglx: Use a common cleanup path instead of copying code around ] Fixes: fbe826b1c106 ("irqchip/riscv-imsic: Add ACPI support") Signed-off-by: Haoxiang Li Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260623073744.2009137-1-haoxiang_li2024@163.com Signed-off-by: Greg Kroah-Hartman

irqchip/crossbar: Use correct index in crossbar_domain_free()

2026-07-24T14:17:04+00:00

commit 043db005a8d6932dc7d217c86307e9af0bc10ddc upstream. crossbar_domain_free() resets the domain data and then uses the nulled out irq_data->hwirq member as index to reset the irq_map[] entry and to write the relevant crossbar register with a safe entry. That means it never frees the correct index and keeps the crossbar register connection to the source interrupt active. If it would not reset the domain data, then this would be even worse as irq_data->hwirq holds the source interrupt number, but both the map and register index need the corresponding GIC SPI number and not the source interrupt number. This might even result in an out of bounds access as the source interrupt number can be higher than the maximal index space. Fix this by using the GIC SPI index from the parent domain's irq_data. Fixes: 783d31863fb82 ("irqchip: crossbar: Convert dra7 crossbar to stacked domains") Signed-off-by: Bhargav Joshi Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260620-irq-crossbar-fix-v2-1-b8e8499f468a@gmail.com Signed-off-by: Greg Kroah-Hartman

irqchip/ts4800: Fix missing chained handler cleanup on remove

2026-07-24T14:16:43+00:00

[ Upstream commit 98bf7e54cec07d514b3575c11896a8b12d50ecc4 ] The driver installs a chained handler for the parent interrupt during probe using irq_set_chained_handler_and_data(), but the remove function does not clear this handler. This leaves a dangling handler that may be called when the parent interrupt fires after the driver has been removed, potentially accessing freed memory and causing a kernel crash. Additionally, the parent_irq obtained via irq_of_parse_and_map() is not stored, making it inaccessible in the remove function. Moreover, interrupt mappings created during probe are not properly disposed. Fix this by: - Saving parent_irq in probe - Clearing the chained handler with NULL in ts4800_ic_remove() - Disposing all IRQ mappings before domain removal to prevent resource leaks Fixes: d01f8633d52e ("irqchip/ts4800: Add TS-4800 interrupt controller") Signed-off-by: Qingshuang Fu Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20260623015211.109382-1-fffsqian@163.com Signed-off-by: Sasha Levin

irqchip/gic-v3-its: Fix OF node reference leak

2026-07-24T14:16:43+00:00

[ Upstream commit 2e1368a9d61bdf5502ddade004f223a5831c5b8c ] of_get_cpu_node() returns a referenced device node. In its_cpu_init_collection(), the Cavium 23144 workaround only uses the node to compare the CPU NUMA node, but the reference is never dropped. Use the device_node cleanup helper for the CPU node reference so it is released when leaving the workaround block, including the NUMA mismatch return path. Fixes: fbf8f40e1658 ("irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144") Signed-off-by: Yuho Choi Signed-off-by: Thomas Gleixner Reviewed-by: Zenghui Yu (Huawei) Acked-by: Marc Zyngier Signed-off-by: Sasha Levin

irqchip/crossbar: Fix parent domain resource leak

2026-07-24T14:16:33+00:00

[ Upstream commit a1074dd62faa6572921d387e8a21589ccea00efc ] irq_domain_alloc_irqs_parent() is called in allocate_gic_irq() but irq_domain_free_irqs_parent() is never called which causes a resource leak. Fix this by calling irq_domain_free_irqs_parent() in crossbar_domain_free(). Fixes: 783d31863fb82 ("irqchip: crossbar: Convert dra7 crossbar to stacked domains") Signed-off-by: Bhargav Joshi Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20260620-irq-crossbar-fix-v2-2-b8e8499f468a@gmail.com Signed-off-by: Sasha Levin

irqchip/imgpdc: Fix resource leak, add missing chained handler cleanup on remove

2026-07-04T11:44:20+00:00

commit 37738fdf2ab1e504d1c63ce5bc0aeb6452d8f057 upstream. The driver allocates domain generic chips using irq_alloc_domain_generic_chips() during probe and sets up chained handlers using irq_set_chained_handler_and_data(). However, on driver removal, the generic chips are not freed and the chained handlers are not removed. The generic chips remain on the global gc_list and may later be accessed by generic interrupt chip suspend, resume, or shutdown callbacks after the driver has been removed, potentially resulting in a use-after-free and kernel crash. The chained handlers that were installed in probe for peripheral and syswake interrupts are also left dangling, which can lead to spurious interrupts accessing freed memory. Fix these issues by: - Setting IRQ_DOMAIN_FLAG_DESTROY_GC flag in domain->flags, so the core code automatically removes generic chips when irq_domain_remove() is called - Clearing all chained handlers with NULL in pdc_intc_remove() Fixes: b6ef9161e43a ("irq-imgpdc: add ImgTec PDC irqchip driver") Signed-off-by: Qingshuang Fu Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260618021352.661773-1-fffsqian@163.com Signed-off-by: Greg Kroah-Hartman

irqchip/ath79-cpu: Remove unused function

2026-06-01T15:50:55+00:00

[ Upstream commit 0fa10fb77069fb67aa51384868ef3702b7791465 ] ath79_cpu_irq_init() was part of the legacy pre-OF code that got removed a while back. Remove it to get rid of a missing prototype warning, reported by the kernel test robot. [ tglx: Fix the subject prefix. Sigh ... ] Fixes: 51fa4f8912c0 ("MIPS: ath79: drop legacy IRQ code") Reported-by: kernel test robot Signed-off-by: Rosen Penev Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20260506085522.1210143-1-rosenp@gmail.com Closes: https://lore.kernel.org/oe-kbuild-all/202412011509.kGQkDr1y-lkp@intel.com/ Signed-off-by: Sasha Levin

irqchip/gic-v5: Allocate ITS parent LPIs as a range

2026-05-23T11:07:19+00:00

commit a7c7e42654b6a8676610ee09d22901432c4851af upstream. The ITS MSI domain no longer manages LPI allocation directly. LPIs are allocated and freed by the parent LPI domain, which can now handle a full range of interrupts and unwind partial allocations internally. Make the ITS domain request and release the parent IRQs as a single range instead of iterating over each interrupt. The ITS allocation path then only needs to reserve EventIDs, allocate the parent range, and fill in the ITS irq_data for each MSI. Since no operation in the per-MSI loop can fail, the partial parent-free unwind becomes unnecessary. On teardown, reset the ITS irq_data for the range and then release the parent range in one call, leaving LPI teardown to the LPI domain. Fixes: 0f0101325876 ("irqchip/gic-v5: Add GICv5 LPI/IPI support") Signed-off-by: Sascha Bischoff Signed-off-by: Thomas Gleixner Reviewed-by: Marc Zyngier Reviewed-by: Lorenzo Pieralisi Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260506093634.382062-4-sascha.bischoff@arm.com Signed-off-by: Greg Kroah-Hartman