kernel/git/stable/linux.git/drivers/nvme/target/admin-cmd.c, branch master

nvmet: fix max_qid race between configfs and controller allocation

2026-08-13T16:26:44+00:00

The function nvmet_subsys_attr_qid_max_store() can race against nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified. Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes: ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1); and at this exact point, a userspace process changes max_qid to 128, nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It attempts to delete active controllers to force a reconnect, but the new controller won't be deleted because it hasn't been added to the subsys->ctrls list yet. nvmet_alloc_ctrl() then proceeds and adds the new controller to the subsys->ctrls list. Later, when nvmet_install_queue() is called, it will see max_qid set to 128, but the memory allocated for sqs is only sized for 64 entries. This results in a KASAN out-of-bounds warning and potential memory corruptions. Fix this by protecting the queue allocations and list insertion in nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem) to modify the attribute, this safely prevents the configfs writer from modifying max_qid during controller creation. Copy the max_qid from the subsystem to the controller's structure during the allocation; ctrl->max_qid never changes as long as the controller remains in LIVE state, so this will prevent similar race conditions. Fixes: 3e980f5995e0 ("nvmet: expose max queues to configfs") Reported-by: syzbot+2626e846cd2585c9aa67@syzkaller.appspotmail.com Signed-off-by: Maurizio Lombardi Signed-off-by: Keith Busch

nvmet: fix NULL pointer dereference in nvmet_execute_identify_nslist()

2026-08-10T19:25:54+00:00

When a host issues an Identify command with CNS 07h (Active Namespace ID List for a specific I/O Command Set), nvmet_execute_identify_nslist() is called with match_css set. The command-set filter dereferences req->ns, but this handler never calls nvmet_req_find_ns(), so req->ns is always NULL (nvmet_req_init() resets it to NULL). As soon as an enabled namespace with an NSID greater than the requested value exists, req->ns->csi dereferences a NULL pointer and oopses. Besides the crash, the comparison is logically wrong: to filter the list by command set it must test the command set of the namespace being iterated, not a single fixed value. Use the loop variable ns->csi. Fixes: 61c9967cd634 ("nvmet: implement active command set ns list") Signed-off-by: Guixin Liu Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Reviewed-by: Nilay Shroff Signed-off-by: Keith Busch

nvmet: fix return status of RMI log page on allocation failure

2026-07-29T15:08:00+00:00

nvmet_execute_get_log_page_rmi() leaves 'status' holding NVME_SC_SUCCESS (set by the successful nvmet_req_find_ns() call) when the kzalloc() for the log buffer fails. It then jumps to the out label and completes the request with a success status, so the host is told the command succeeded while no data was transferred. Initialize 'status' to NVME_SC_INTERNAL, matching the smart log handler, so an allocation failure is reported as an internal error. Fixes: 5fd075cdaf36 ("nvmet: implement rotational media information log") Reviewed-by: Christoph Hellwig Signed-off-by: Guixin Liu Signed-off-by: Keith Busch

Merge tag 'nvme-7.1-2026-04-24' of git://git.infradead.org/nvme into block-7.1

2026-04-27T21:47:21+00:00

Pull NVMe fixes from Keith: "- Target data transfer size confiruation (Aurelien) - Enable P2P for RDMA (Shivaji Kant) - TCP target updates (Maurizio, Alistair, Chaitanya, Shivam Kumar) - TCP host updates (Alistair, Chaitanya) - Authentication updates (Alistair, Daniel, Chris Leech) - Multipath fixes (John Garry) - New quirks (Alan Cui, Tao Jiang) - Apple driver fix (Fedor Pchelkin) - PCI admin doorbell update fix (Keith)" * tag 'nvme-7.1-2026-04-24' of git://git.infradead.org/nvme: (22 commits) nvme-auth: Hash DH shared secret to create session key nvme-pci: fix missed admin queue sq doorbell write nvme-auth: Include SC_C in RVAL controller hash nvme-tcp: teardown circular locking fixes nvmet-tcp: Don't clear tls_key when freeing sq Revert "nvmet-tcp: Don't free SQ on authentication success" nvme: skip trace completion for host path errors nvme-pci: add quirk for Memblaze Pblaze5 (0x1c5f:0x0555) nvme-multipath: put module reference when delayed removal work is canceled nvme: expose TLS mode nvme-apple: drop invalid put of admin queue reference count nvme-core: fix parameter name in comment nvmet: avoid recursive nvmet-wq flush in nvmet_ctrl_free nvme-multipath: drop head pointer check in nvme_mpath_clear_current_path() nvme: add quirk NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808 (Samsung PM981/983/970 EVO Plus ) nvmet-tcp: fix race between ICReq handling and queue teardown nvmet-tcp: remove redundant calls to nvmet_tcp_fatal_error() nvmet-tcp: propagate nvmet_tcp_build_pdu_iovec() errors to its callers nvme: enable PCI P2PDMA support for RDMA transport nvmet: introduce new mdts configuration entry ...

Merge tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

2026-04-13T22:51:31+00:00

Pull block updates from Jens Axboe: - Add shared memory zero-copy I/O support for ublk, bypassing per-I/O copies between kernel and userspace by matching registered buffer PFNs at I/O time. Includes selftests. - Refactor bio integrity to support filesystem initiated integrity operations and arbitrary buffer alignment. - Clean up bio allocation, splitting bio_alloc_bioset() into clear fast and slow paths. Add bio_await() and bio_submit_or_kill() helpers, unify synchronous bi_end_io callbacks. - Fix zone write plug refcount handling and plug removal races. Add support for serializing zone writes at QD=1 for rotational zoned devices, yielding significant throughput improvements. - Add SED-OPAL ioctls for Single User Mode management and a STACK_RESET command. - Add io_uring passthrough (uring_cmd) support to the BSG layer. - Replace pp_buf in partition scanning with struct seq_buf. - zloop improvements and cleanups. - drbd genl cleanup, switching to pre_doit/post_doit. - NVMe pull request via Keith: - Fabrics authentication updates - Enhanced block queue limits support - Workqueue usage updates - A new write zeroes device quirk - Tagset cleanup fix for loop device - MD pull requests via Yu Kuai: - Fix raid5 soft lockup in retry_aligned_read() - Fix raid10 deadlock with check operation and nowait requests - Fix raid1 overlapping writes on writemostly disks - Fix sysfs deadlock on array_state=clear - Proactive RAID-5 parity building with llbitmap, with write_zeroes_unmap optimization for initial sync - Fix llbitmap barrier ordering, rdev skipping, and bitmap_ops version mismatch fallback - Fix bcache use-after-free and uninitialized closure - Validate raid5 journal metadata payload size - Various cleanups - Various other fixes, improvements, and cleanups * tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (146 commits) ublk: fix tautological comparison warning in ublk_ctrl_reg_buf scsi: bsg: fix buffer overflow in scsi_bsg_uring_cmd() block: refactor blkdev_zone_mgmt_ioctl MAINTAINERS: update ublk driver maintainer email Documentation: ublk: address review comments for SHMEM_ZC docs ublk: allow buffer registration before device is started ublk: replace xarray with IDA for shmem buffer index allocation ublk: simplify PFN range loop in __ublk_ctrl_reg_buf ublk: verify all pages in multi-page bvec fall within registered range ublk: widen ublk_shmem_buf_reg.len to __u64 for 4GB buffer support xfs: use bio_await in xfs_zone_gc_reset_sync block: add a bio_submit_or_kill helper block: factor out a bio_await helper block: unify the synchronous bi_end_io callbacks xfs: fix number of GC bvecs selftests/ublk: add read-only buffer registration test selftests/ublk: add filesystem fio verify test for shmem_zc selftests/ublk: add hugetlbfs shmem_zc test for loop target selftests/ublk: add shared memory zero-copy test selftests/ublk: add UBLK_F_SHMEM_ZC support for loop target ...

nvmet: introduce new mdts configuration entry

2026-04-08T15:13:46+00:00

Using this port configuration, one will be able to set the Maximum Data Transfer Size (MDTS) for any controller that will be associated to the configured port. The default value remains 0 (no limit). Signed-off-by: Max Gurtovoy Signed-off-by: Aurelien Aptel Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch

nvmet: replace use of system_wq with system_percpu_wq

2026-03-27T14:35:05+00:00

This patch continues the effort to refactor workqueue APIs, which has begun with the changes introducing new workqueues and a new alloc_workqueue flag: commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq") commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag") The point of the refactoring is to eventually alter the default behavior of workqueues to become unbound by default so that their workload placement is optimized by the scheduler. Before that to happen, workqueue users must be converted to the better named new workqueues with no intended behaviour changes: system_wq -> system_percpu_wq system_unbound_wq -> system_dfl_wq This way the old obsolete workqueues (system_wq, system_unbound_wq) can be removed in the future. Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/ Suggested-by: Tejun Heo Reviewed-by: Christoph Hellwig Signed-off-by: Marco Crivellari Signed-off-by: Keith Busch

nvmet: report NPDGL and NPDAL

2026-03-27T14:35:05+00:00

A block device with a very large discard_granularity queue limit may not be able to report it in the 16-bit NPDG and NPDA fields in the Identify Namespace data structure. For this reason, version 2.1 of the NVMe specs added 32-bit fields NPDGL and NPDAL to the NVM Command Set Specific Identify Namespace structure. So report the discard_granularity there too and set OPTPERF to 11b to indicate those fields are supported. Signed-off-by: Caleb Sander Mateos Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch

Merge tag 'block-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

2026-03-13T17:13:06+00:00

Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - Fix nvme-pci IRQ race and slab-out-of-bounds access - Fix recursive workqueue locking for target async events - Various cleanups - Fix a potential NULL pointer dereference in ublk on size setting - ublk automatic partition scanning fix - Two s390 dasd fixes * tag 'block-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: nvme: Annotate struct nvme_dhchap_key with __counted_by nvme-core: do not pass empty queue_limits to blk_mq_alloc_queue() nvme-pci: Fix race bug in nvme_poll_irqdisable() nvmet: move async event work off nvmet-wq nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set s390/dasd: Copy detected format information to secondary device s390/dasd: Move quiesce state with pprc swap ublk: don't clear GD_SUPPRESS_PART_SCAN for unprivileged daemons ublk: fix NULL pointer dereference in ublk_ctrl_set_size()

nvmet: move async event work off nvmet-wq

2026-03-10T15:20:28+00:00

For target nvmet_ctrl_free() flushes ctrl->async_event_work. If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue completion for the same worker:- A. Async event work queued on nvmet-wq (prior to disconnect): nvmet_execute_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) nvmet_add_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) B. Full pre-work chain (RDMA CM path): nvmet_rdma_cm_handler() nvmet_rdma_queue_disconnect() __nvmet_rdma_queue_disconnect() queue_work(nvmet_wq, &queue->release_work) process_one_work() lock((wq_completion)nvmet-wq) <--------- 1st nvmet_rdma_release_queue_work() C. Recursive path (same worker): nvmet_rdma_release_queue_work() nvmet_rdma_free_queue() nvmet_sq_destroy() nvmet_ctrl_put() nvmet_ctrl_free() flush_work(&ctrl->async_event_work) __flush_work() touch_wq_lockdep_map() lock((wq_completion)nvmet-wq) <--------- 2nd Lockdep splat: ============================================ WARNING: possible recursive locking detected 6.19.0-rc3nvme+ #14 Tainted: G N -------------------------------------------- kworker/u192:42/44933 is trying to acquire lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 3 locks held by kworker/u192:42/44933: #0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 #1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660 #2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma] Call Trace: __flush_work+0x268/0x530 nvmet_ctrl_free+0x140/0x310 [nvmet] nvmet_cq_put+0x74/0x90 [nvmet] nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma] nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma] process_one_work+0x206/0x660 worker_thread+0x184/0x320 kthread+0x10c/0x240 ret_from_fork+0x319/0x390 Move async event work to a dedicated nvmet-aen-wq to avoid reentrant flush on nvmet-wq. Reviewed-by: Christoph Hellwig Signed-off-by: Chaitanya Kulkarni Signed-off-by: Keith Busch