kernel/git/stable/linux.git/drivers/s390/block, branch linux-4.7.y

s390/dasd: fix hanging device after clear subchannel

2016-09-07T06:34:49+00:00

commit 9ba333dc55cbb9523553df973adb3024d223e905 upstream. When a device is in a status where CIO has killed all I/O by itself the interrupt for a clear request may not contain an irb to determine the clear function. Instead it contains an error pointer -EIO. This was ignored by the DASD int_handler leading to a hanging device waiting for a clear interrupt. Handle -EIO error pointer correctly for requests that are clear pending and treat the clear as successful. Signed-off-by: Stefan Haberland Reviewed-by: Sebastian Ott Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

Merge tag 'dax-misc-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

2016-05-27T02:34:26+00:00

Pull misc DAX updates from Vishal Verma: "DAX error handling for 4.7 - Until now, dax has been disabled if media errors were found on any device. This enables the use of DAX in the presence of these errors by making all sector-aligned zeroing go through the driver. - The driver (already) has the ability to clear errors on writes that are sent through the block layer using 'DSMs' defined in ACPI 6.1. Other misc changes: - When mounting DAX filesystems, check to make sure the partition is page aligned. This is a requirement for DAX, and previously, we allowed such unaligned mounts to succeed, but subsequent reads/writes would fail. - Misc/cleanup fixes from Jan that remove unused code from DAX related to zeroing, writeback, and some size checks" * tag 'dax-misc-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: fix a comment in dax_zero_page_range and dax_truncate_page dax: for truncate/hole-punch, do zeroing through the driver if possible dax: export a low-level __dax_zero_page_range helper dax: use sb_issue_zerout instead of calling dax_clear_sectors dax: enable dax in the presence of known media errors (badblocks) dax: fallback from pmd to pte on error block: Update blkdev_dax_capable() for consistency xfs: Add alignment check for DAX mount ext2: Add alignment check for DAX mount ext4: Add alignment check for DAX mount block: Add bdev_dax_supported() for dax mount checks block: Add vfs_msg() interface dax: Remove redundant inode size checks dax: Remove pointless writeback from dax_do_io() dax: Remove zeroing from dax_io() dax: Remove dead zeroing code from fault handlers ext2: Avoid DAX zeroing to corrupt data ext2: Fix block zeroing in ext2_get_blocks() for DAX dax: Remove complete_unwritten argument DAX: move RADIX_DAX_ definitions to dax.c

dax: enable dax in the presence of known media errors (badblocks)

2016-05-18T18:16:56+00:00

1/ If a mapping overlaps a bad sector fail the request. 2/ Do not opportunistically report more dax-capable capacity than is requested when errors present. Reviewed-by: Jeff Moyer Reviewed-by: Christoph Hellwig Signed-off-by: Dan Williams [vishal: fix a conflict with system RAM collision patches] [vishal: add a 'size' parameter to ->direct_access] [vishal: fix a conflict with DAX alignment check patches] Signed-off-by: Vishal Verma

s390/dasd: Add new ioctl BIODASDCHECKFMT

2016-04-15T16:16:39+00:00

Implement new DASD IOCTL BIODASDCHECKFMT to check a range of tracks on a DASD volume for correct formatting. The following characteristics are checked: - Block size - ECKD key length - ECKD record ID - Number of records per track Signed-off-by: Jan Höppner Signed-off-by: Martin Schwidefsky

s390/dasd: add query host access to volume support

2016-04-15T16:16:37+00:00

With this feature, applications can query if a DASD volume is online to another operating system instances by checking the online status of all attached hosts from the storage server. Reviewed-by: Sebastian Ott Reviewed-by: Heiko Carstens Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky

s390/dcssblk: fix possible deadlock in remove vs. per-device attributes

2016-04-15T16:01:44+00:00

dcssblk_remove_store() holds the dcssblk_devices_sem semaphore while calling device_unregister(), which in turn tries to acquire the kernfs kn->dev_map rwsem for the device sysfs subtree. The same rwsem is also acquired when using the per-device sysfs attributes in the device sub-tree, and the attribute handlers then also acquire the dcssblk_devices_sem. This can lead to a deadlock when removing a DCSS while concurrently reading from / writing to one of its sysfs attributes. The following lockdep warning hinted towards the issue (CPU0 = dcssblk_remove_store, CPU1 = dcssblk_shared_store): [ 76.496047] Possible unsafe locking scenario: [ 76.496054] CPU0 CPU1 [ 76.496059] ---- ---- [ 76.496087] lock(&dcssblk_devices_sem); [ 76.496090] lock(s_active#175); [ 76.496106] lock(&dcssblk_devices_sem); [ 76.496110] lock(s_active#175); [ 76.496115] *** DEADLOCK *** Fix this by releasing the dcssblk_devices_sem semaphore, which only protects internal DCSS data, before calling device_unregister(). Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky

s390/scm_blk: fix deadlock for requests != REQ_TYPE_FS

2016-04-01T15:20:54+00:00

When we refuse a non REQ_TYPE_FS request in the build request function we already hold the queue lock. Thus we must not call blk_end_request_all but __blk_end_request_all. Reported-by: Peter Oberparleiter Fixes: de9587a ('s390/scm_blk: fix endless loop for requests != REQ_TYPE_FS') Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky

s390/dasd: reorder lcu and device lock

2016-03-17T12:18:25+00:00

Reorder lcu and device lock to get rid of the error-prone trylock mechanism. The locking order is lcu lock -> device lock. This protects against changes to the lcu device lists and enables us to iterate over the devices, take the cdev lock and make changes to the device structures. The complicated part is the summary unit check handler that gets an interrupt on one device of the lcu that leads to structural changes of the whole lcu itself. This work needs to be done even if devices on the lcu disappear. So a device independent worker is used. The old approach tried to update some lcu structures and set up the lcu worker in the interrupt context with the device lock held. But this forced the lock order "cdev lock -> lcu lock" that made it hard to have the lcu lock held and iterate over all devices and change them. The new approach is to schedule a device specific worker that gets out of the interrupt context and rid of the device lock for summary unit checks. This worker is able to take the lcu lock and schedule the lcu worker that updates all devices. The time between interrupt and worker execution is no problem because the devices in the lcu reject all I/O in this time with an appropriate error. The dasd driver can deal with this situation and re-drive the I/O later on. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2016-03-16T17:47:45+00:00

Pull s390 updates from Martin Schwidefsky: - Add the CPU id for the new z13s machine - Add a s390 specific XOR template for RAID-5 checksumming based on the XC instruction. Remove all other alternatives, XC is always faster - The merge of our four different stack tracers into a single one - Tidy up the code related to page tables, several large inline functions are now out-of-line. Bloat-o-meter reports ~11K text size reduction - A binary interface for the priviledged CLP instruction to retrieve the hardware view of the installed PCI functions - Improvements for the dasd format code - Bug fixes and cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits) s390/pci: enforce fmb page boundary rule s390: fix floating pointer register corruption (again) s390/cpumf: add missing lpp magic initialization s390: Fix misspellings in comments s390/mm: split arch/s390/mm/pgtable.c s390/mm: uninline pmdp_xxx functions from pgtable.h s390/mm: uninline ptep_xxx functions from pgtable.h s390/pci: add ioctl interface for CLP s390: Use pr_warn instead of pr_warning s390/dasd: remove casts to dasd_*_private s390/dasd: Refactor dasd format functions s390/dasd: Simplify code in format logic s390/dasd: Improve dasd format code s390/percpu: remove this_cpu_cmpxchg_double_4 s390/cpumf: Improve guest detection heuristics s390/fault: merge report_user_fault implementations s390/dis: use correct escape sequence for '%' character s390/kvm: simplify set_guest_storage_key s390/oprofile: add z13/z13s model numbers s390: add z13s model number to z13 elf platform ...

s390: Use pr_warn instead of pr_warning

2016-03-07T12:12:04+00:00

Convert the uses of pr_warning to pr_warn so there are fewer uses of the old pr_warning. Miscellanea: o Align arguments o Coalesce formats Signed-off-by: Joe Perches Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky