kernel/git/stable/linux.git/drivers/s390/char, branch linux-3.2.y

s390/vmlogrdr: fix IUCV buffer allocation

2017-03-16T02:18:31+00:00

commit 5457e03de918f7a3e294eb9d26a608ab8a579976 upstream. The buffer for iucv_message_receive() needs to be below 2 GB. In __iucv_message_receive(), the buffer address is casted to an u32, which would result in either memory corruption or an addressing exception when using addresses >= 2 GB. Fix this by using GFP_DMA for the buffer allocation. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky Signed-off-by: Ben Hutchings

s390/con3270: fix insufficient space padding

2017-02-23T03:50:52+00:00

commit 6cd997db911f28f2510b771691270c52b63ed2e6 upstream. con3270 contains an optimisation that reduces the amount of data to be transmitted to the 3270 terminal by putting a Repeat to Address (RA) order into the data stream. The RA order itself takes up space, so con3270 only uses it if there's enough space left in the line buffer. Otherwise it just pads out the line manually. For lines that were _just_ short enough that the RA order still fit in the line buffer, the line was instead padded with an insufficient amount of spaces. This was caused by examining the size of the allocated line buffer rather than the length of the string to be displayed. For con3270_cline_end(), we just compare against the line length. For con3270_update_string() however that isn't available anymore, so we check whether the Repeat to Address order is present. Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git) Tested-by: Jing Liu Tested-by: Yang Chen Signed-off-by: Sascha Silbe Signed-off-by: Martin Schwidefsky Signed-off-by: Ben Hutchings

s390/con3270: fix use of uninitialised data

2017-02-23T03:50:52+00:00

commit c14f2aac7aa147861793eed9f41f91dd530f0be1 upstream. con3270 contains an optimisation that reduces the amount of data to be transmitted to the 3270 terminal by putting a Repeat to Address (RA) order into the data stream. The RA order itself takes up space, so con3270 only uses it if there's enough space left in the line buffer. Otherwise it just pads out the line manually. For lines too long to include the RA order, one byte was left uninitialised. This was caused by an off-by-one bug in the loop that pads out the line. Since the buffer is allocated from a common pool, the single byte left uninitialised contained some previous buffer content. Usually this was just a space or some character (which can result in clutter but is otherwise harmless). Sometimes, however, it was a Repeat to Address order, messing up the entire screen layout and causing the display to send the entire buffer content on every keystroke. Fixes: f51320a5 ("[PATCH] s390: new 3270 driver.") (tglx/history.git) Reported-by: Liu Jing Tested-by: Jing Liu Tested-by: Yang Chen Signed-off-by: Sascha Silbe Signed-off-by: Martin Schwidefsky Signed-off-by: Ben Hutchings

s390/3215: fix tty output containing tabs

2015-02-20T00:49:40+00:00

commit e512d56c799517f33b301d81e9a5e0ebf30c2d1e upstream. git commit 37f81fa1f63ad38e16125526bb2769ae0ea8d332 "n_tty: do O_ONLCR translation as a single write" surfaced a bug in the 3215 device driver. In combination this broke tab expansion for tty ouput. The cause is an asymmetry in the behaviour of tty3215_ops->write vs tty3215_ops->put_char. The put_char function scans for '\t' but the write function does not. As the driver has logic for the '\t' expansion remove XTABS from c_oflag of the initial termios as well. Reported-by: Stephen Powell Signed-off-by: Martin Schwidefsky Signed-off-by: Ben Hutchings

s390/memory hotplug: prevent offline of active memory increments

2013-05-13T14:02:27+00:00

commit 94c163663fc1dcfc067a5fb3cc1446b9469975ce upstream. In case a machine supports memory hotplug all active memory increments present at IPL time have been initialized with a "usecount" of 1. This is wrong if the memory increment size is larger than the memory section size of the memory hotplug code. If that is the case the usecount must be initialized with the number of memory sections that fit into one memory increment. Otherwise it is possible to put a memory increment into standby state even if there are still active sections. Afterwards addressing exceptions might happen which cause the kernel to panic. However even worse, if a memory increment was put into standby state and afterwards into active state again, it's contents would have been zeroed, leading to memory corruption. This was only an issue for machines that support standby memory and have at least 256GB memory. This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix initial usecount of increments". Signed-off-by: Heiko Carstens Reviewed-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky Signed-off-by: Ben Hutchings

compat: fix compile breakage on s390

2012-03-12T19:31:22+00:00

commit 048cd4e51d24ebf7f3552226d03c769d6ad91658 upstream. The new is_compat_task() define for the !COMPAT case in include/linux/compat.h conflicts with a similar define in arch/s390/include/asm/compat.h. This is the minimal patch which fixes the build issues. Signed-off-by: Heiko Carstens Signed-off-by: Linus Torvalds Cc: Jonathan Nieder Signed-off-by: Greg Kroah-Hartman

[S390] zfcpdump: Do not initialize zfcpdump in kdump mode

2011-11-14T10:19:09+00:00

When the kernel is started in kdump mode, zfcpdump should not be initialized because both dump methods can't be used at the same time. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky

Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2011-11-07T03:44:47+00:00

* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include net: sch_generic remove redundant use of net: inet_timewait_sock doesnt need ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h

s390: add missing module.h/export.h includes

2011-10-31T23:30:58+00:00

Fix several compile errors on s390 caused by splitting module.h. Some include additions [e.g. qdio_setup.c, zfcp_qdio.c] are in anticipation of pending changes queued for s390 that increase the modular use footprint. [PG: added additional obvious changes since Heiko's original patch] Signed-off-by: Heiko Carstens Signed-off-by: Paul Gortmaker

[S390] zcore: add missing module.h include

2011-10-30T14:16:44+00:00

Add missing module.h include to prevent build breakage after the module.h split work hits Linus' tree. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky