kernel/git/stable/linux.git/drivers/s390/net, branch linux-4.7.y

qeth: delete napi struct when removing a qeth device

2016-07-05T06:32:08+00:00

A qeth_card contains a napi_struct linked to the net_device during device probing. This struct must be deleted when removing the qeth device, otherwise Panic on oops can occur when qeth devices are repeatedly removed and added. Fixes: a1c3ed4c9ca ("qeth: NAPI support for l2 and l3 discipline") Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Ursula Braun Tested-by: Alexander Klein Signed-off-by: David S. Miller

drivers: fix dev->trans_start removal fallout

2016-05-04T21:07:14+00:00

kbuild test robot reported a build failure on s390. While at it, also fix missing conversion in the tilera driver. Fixes: 9b36627acecd5792 ("net: remove dev->trans_start") Reported-by: kbuild test robot Signed-off-by: Florian Westphal Signed-off-by: David S. Miller

treewide: replace dev->trans_start update with helper

2016-05-04T18:16:49+00:00

Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal Acked-by: Felipe Balbi Acked-by: Mugunthan V N Acked-by: Antonio Quartulli Signed-off-by: David S. Miller

s390: Use pr_warn instead of pr_warning

2016-03-07T12:12:04+00:00

Convert the uses of pr_warning to pr_warn so there are fewer uses of the old pr_warning. Miscellanea: o Align arguments o Coalesce formats Signed-off-by: Joe Perches Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

qeth: get rid of redundant 0-termination

2015-12-14T21:16:45+00:00

0-termination is redundant, since sprintf has done that. Signed-off-by: Rasmus Villemoes Signed-off-by: Ursula Braun Signed-off-by: David S. Miller

qeth: repair SBAL elements calculation

2015-12-14T21:16:45+00:00

When sending skbs, qeth determines the number of qdio SBAL elements required. If qeth sends a fragmented skb, the SBAL element number calculation is wrong, because the fragmented data part is added twice in qeth_l3_tso_elements(). This patch makes sure fragmented data is handled in qeth_elements_for_frags() only, while qeth_l3_tso_elements() starts calculation of qdio SBAL elements just with the linear data part of the skb. Signed-off-by: Ursula Braun Reviewed-by: Thomas Richter Signed-off-by: David S. Miller

qeth: initialize net_device with carrier off

2015-12-14T21:16:45+00:00

/sys/class/net//operstate for an active qeth network interface offen shows "unknown", which translates to "state UNKNOWN in output of "ip link show". It is caused by a missing initialization of the __LINK_STATE_NOCARRIER bit in the net_device state field. This patch adds a netif_carrier_off() invocation when creating the net_device for a qeth device. Signed-off-by: Ursula Braun Acked-by: Hendrik Brueckner Reference-ID: Bugzilla 133209 Signed-off-by: David S. Miller

qeth use common function qeth_get_setassparms_cmd

2015-12-14T21:16:45+00:00

There have been 2 identical versions of function qeth_get_setassparms_cmd() for layer 2 and layer 3. Remove the layer 3 function qeth_l3_get_setassparms_cmd() and call the common one named qeth_get_setassparms_cmd() located in qeth_core_main.c Signed-off-by: Thomas Richter Signed-off-by: Ursula Braun Reviewed-by: Eugene Crosser Signed-off-by: David S. Miller

s390-ctcm: Delete unnecessary checks before the function call "channel_remove"

2015-12-14T21:16:44+00:00

The channel_remove() function tests whether its argument is NULL and then returns immediately. Thus the test around the calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Ursula Braun Signed-off-by: David S. Miller

s390/qeth: optimize MAC handling in rx_mode callback

2015-10-07T11:52:04+00:00

In layer2 mode of the qeth driver, MAC address lists from struct net_device require mapping to the OSA-card. The existing implementation is inefficient for lists with more than several MAC addresses, since for every ndo_set_rx_mode callback it removes all MAC addresses first, and then registers the current MAC address list. This patch changes implementation of ndo_set_rx_mode callback in qeth, only performing hardware registration/removal for new/deleted addresses. To shorten lookup of MAC addresses registered addresses are kept in a hashtable instead of a linear list. Signed-off-by: Lakhvich Dmitriy Signed-off-by: Ursula Braun Reviewed-by: Eugene Crosser Reviewed-by: Thomas Richter Tested-by: Christian Borntraeger Signed-off-by: David S. Miller