kernel/git/stable/linux.git/drivers/scsi, branch linux-4.16.y

scsi: vmw-pvscsi: return DID_BUS_BUSY for adapter-initated aborts

2018-06-20T19:01:32+00:00

[ Upstream commit f4b024271ae3e9786e5d6f1c05b01b57a74e1d6d ] The vmw_pvscsi driver returns DID_ABORT for commands aborted internally by the adapter, leading to the filesystem going read-only. Change the result to DID_BUS_BUSY, causing the kernel to retry the command. Signed-off-by: Jim Gill Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: isci: Fix infinite loop in while loop

2018-06-20T19:01:21+00:00

[ Upstream commit 4bc83b3f272fe8f36450f9c003df49cf07ffe5fd ] In the case when the phy_mask is bitwise anded with the phy_index bit is zero the continue statement currently jumps to the next iteration of the while loop and phy_index is never actually incremented, potentially causing an infinite loop if phy_index is less than SCI_MAX_PHS. Fix this by turning the while loop into a for loop. Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: storvsc: Set up correct queue depth values for IDE devices

2018-06-20T19:01:21+00:00

[ Upstream commit f286299c1d0ba5e2ca0377610307b370fe178767 ] Unlike SCSI and FC, we don't use multiple channels for IDE. Also fix the calculation for sub-channels. Signed-off-by: Long Li Reviewed-by: Michael Kelley Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: megaraid_sas: Do not log an error if FW successfully initializes.

2018-06-20T19:01:19+00:00

[ Upstream commit fb1633d56b0025233ed3dc49b44544748d509d9d ] Fixes: 2d2c2331673c ("scsi: megaraid_sas: modified few prints in OCR and IOC INIT path") Signed-off-by: Vinson Lee Acked-by: Shivasharan S Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: iscsi: respond to netlink with unicast when appropriate

2018-06-20T19:01:19+00:00

[ Upstream commit af17092810a887178195276255b7b31f8fbe7dbe ] Instead of always multicasting responses, send a unicast netlink message directed at the correct pid. This will be needed if we ever want to support multiple userspace processes interacting with the kernel over iSCSI netlink simultaneously. Limitations can currently be seen if you attempt to run multiple iscsistart commands in parallel. We've fixed up the userspace issues in iscsistart that prevented multiple instances from running, so now attempts to speed up booting by bringing up multiple iscsi sessions at once in the initramfs are just running into misrouted responses that this fixes. Signed-off-by: Chris Leech Reviewed-by: Lee Duncan Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: scsi_transport_srp: Fix shost to rport translation

2018-06-05T09:46:13+00:00

commit c9ddf73476ff4fffb7a87bd5107a0705bf2cf64b upstream. Since an SRP remote port is attached as a child to shost->shost_gendev and as the only child, the translation from the shost pointer into an rport pointer must happen by looking up the shost child that is an rport. This patch fixes the following KASAN complaint: BUG: KASAN: slab-out-of-bounds in srp_timed_out+0x57/0x110 [scsi_transport_srp] Read of size 4 at addr ffff880035d3fcc0 by task kworker/1:0H/19 CPU: 1 PID: 19 Comm: kworker/1:0H Not tainted 4.16.0-rc3-dbg+ #1 Workqueue: kblockd blk_mq_timeout_work Call Trace: dump_stack+0x85/0xc7 print_address_description+0x65/0x270 kasan_report+0x231/0x350 srp_timed_out+0x57/0x110 [scsi_transport_srp] scsi_times_out+0xc7/0x3f0 [scsi_mod] blk_mq_terminate_expired+0xc2/0x140 bt_iter+0xbc/0xd0 blk_mq_queue_tag_busy_iter+0x1c7/0x350 blk_mq_timeout_work+0x325/0x3f0 process_one_work+0x441/0xa50 worker_thread+0x76/0x6c0 kthread+0x1b2/0x1d0 ret_from_fork+0x24/0x30 Fixes: e68ca75200fe ("scsi_transport_srp: Reduce failover time") Signed-off-by: Bart Van Assche Cc: Hannes Reinecke Cc: Johannes Thumshirn Cc: Jason Gunthorpe Cc: Doug Ledford Cc: Laurence Oberman Cc: stable@vger.kernel.org Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

cdrom: do not call check_disk_change() inside cdrom_open()

2018-05-30T06:17:36+00:00

[ Upstream commit 2bbea6e117357d17842114c65e9a9cf2d13ae8a3 ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 #14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b #14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 #15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf #16 [ffff880078417d00] do_last at ffffffff8120d53d #17 [ffff880078417db0] path_openat at ffffffff8120e6b2 #18 [ffff880078417e48] do_filp_open at ffffffff8121082b #19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 #20 [ffff880078417f70] sys_open at ffffffff811fde4e #21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by: Maurizio Lombardi Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

sr: get/drop reference to device in revalidate and check_events

2018-05-30T06:17:21+00:00

[ Upstream commit 2d097c50212e137e7b53ffe3b37561153eeba87d ] We can't just use scsi_cd() to get the scsi_cd structure, we have to grab a live reference to the device. For both callbacks, we're not inside an open where we already hold a reference to the device. This fixes device removal/addition under concurrent device access, which otherwise could result in the below oops. NULL pointer dereference at 0000000000000010 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: sr 12:0:0:0: [sr2] scsi-1 drive scsi_debug crc_t10dif crct10dif_generic crct10dif_common nvme nvme_core sb_edac xl sr 12:0:0:0: Attached scsi CD-ROM sr2 sr_mod cdrom btrfs xor zstd_decompress zstd_compress xxhash lzo_compress zlib_defc sr 12:0:0:0: Attached scsi generic sg7 type 5 igb ahci libahci i2c_algo_bit libata dca [last unloaded: crc_t10dif] CPU: 43 PID: 4629 Comm: systemd-udevd Not tainted 4.16.0+ #650 Hardware name: Dell Inc. PowerEdge T630/0NT78X, BIOS 2.3.4 11/09/2016 RIP: 0010:sr_block_revalidate_disk+0x23/0x190 [sr_mod] RSP: 0018:ffff883ff357bb58 EFLAGS: 00010292 RAX: ffffffffa00b07d0 RBX: ffff883ff3058000 RCX: ffff883ff357bb66 RDX: 0000000000000003 RSI: 0000000000007530 RDI: ffff881fea631000 RBP: 0000000000000000 R08: ffff881fe4d38400 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000001b6 R12: 000000000800005d R13: 000000000800005d R14: ffff883ffd9b3790 R15: 0000000000000000 FS: 00007f7dc8e6d8c0(0000) GS:ffff883fff340000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000003ffda98005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __invalidate_device+0x48/0x60 check_disk_change+0x4c/0x60 sr_block_open+0x16/0xd0 [sr_mod] __blkdev_get+0xb9/0x450 ? iget5_locked+0x1c0/0x1e0 blkdev_get+0x11e/0x320 ? bdget+0x11d/0x150 ? _raw_spin_unlock+0xa/0x20 ? bd_acquire+0xc0/0xc0 do_dentry_open+0x1b0/0x320 ? inode_permission+0x24/0xc0 path_openat+0x4e6/0x1420 ? cpumask_any_but+0x1f/0x40 ? flush_tlb_mm_range+0xa0/0x120 do_filp_open+0x8c/0xf0 ? __seccomp_filter+0x28/0x230 ? _raw_spin_unlock+0xa/0x20 ? __handle_mm_fault+0x7d6/0x9b0 ? list_lru_add+0xa8/0xc0 ? _raw_spin_unlock+0xa/0x20 ? __alloc_fd+0xaf/0x160 ? do_sys_open+0x1a6/0x230 do_sys_open+0x1a6/0x230 do_syscall_64+0x5a/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Reviewed-by: Lee Duncan Reviewed-by: Jan Kara Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

sr: pass down correctly sized SCSI sense buffer

2018-05-30T06:17:17+00:00

commit f7068114d45ec55996b9040e98111afa56e010fe upstream. We're casting the CDROM layer request_sense to the SCSI sense buffer, but the former is 64 bytes and the latter is 96 bytes. As we generally allocate these on the stack, we end up blowing up the stack. Fix this by wrapping the scsi_execute() call with a properly sized sense buffer, and copying back the bits for the CDROM layer. Cc: stable@vger.kernel.org Reported-by: Piotr Gabriel Kosinski Reported-by: Daniel Shapira Tested-by: Kees Cook Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix frequency of Release WQE CQEs

2018-05-25T14:46:14+00:00

[ Upstream commit 04673e38f56b30cd39b1fa0f386137d818b17781 ] The driver controls when the hardware sends completions that communicate consumption of elements from the WQ. This is done by setting a WQEC bit on a WQE. The current driver sets it on every Nth WQE posting. However, the driver isn't clearing the bit if the WQE is reused. Thus, if the queue depth isn't evenly divisible by N, with enough time, it can be set on every element, creating a lot of overhead and risking CQ full conditions. Correct by clearing the bit when not setting it on an Nth element. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman