kernel/git/stable/linux.git/drivers/usb/host, branch linux-6.6.y

xhci: dbgtty: Fix unregister on tty_alloc_driver() failure

2026-09-02T12:29:19+00:00

commit 25b8dfc13495a6c1cf4abacc8ef20196c7f20e5c upstream. Make sure to set dbc_tty_driver to NULL to match the check in dbc_tty_exit(). For that, make detached error handling path common to the other branch in the same function. Fixes: 4521f1613940 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.") Cc: stable@vger.kernel.org # v5.10 Cc: Mathias Nyman Cc: Greg Kroah-Hartman Signed-off-by: Lucas De Marchi Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20260806142113.2436238-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: dbgtty: Fix unregister on tty_register_driver() failure

2026-09-02T12:29:19+00:00

commit a916fa66a43e10f63198b6ce978badffc678821a upstream. If tty_register_driver() fails, it drops the reference, but fails to set the global dbc_tty_driver to NULL, causing the unregister to be called again when module exits. On module unload dbc_tty_exit() only gates its cleanup on the driver pointer being non-NULL, so it operates on the already-freed driver: module_init(xhci_hcd_init) xhci_hcd_init() xhci_dbc_init() [return value ignored] dbc_tty_init() tty_register_driver() fails tty_driver_kref_put() -> driver freed (dbc_tty_driver left dangling) ... module_exit(xhci_hcd_fini) xhci_hcd_fini() xhci_dbc_exit() dbc_tty_exit() if (dbc_tty_driver) -> true (dangling) tty_unregister_driver() -> use-after-free Fixes: 4521f1613940 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.") Cc: stable@vger.kernel.org # v5.10 Cc: Mathias Nyman Cc: Greg Kroah-Hartman Signed-off-by: Lucas De Marchi Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20260806142113.2436238-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci: Handle USB3 port events when there is one roothub

2026-09-02T12:29:19+00:00

commit 3e91ec3e7d80a327fb558207613c80415d3bf756 upstream. handle_port_status() drops every USB3 port event when xhci->shared_hcd is NULL. The check dates from a time when xhci-plat always created a shared hcd, so a NULL one could only mean the hcd had been removed. Since commit 4736ebd7fcaf ("usb: host: xhci-plat: omit shared hcd if either root hub has no ports") that is no longer true. A controller whose USB2 root hub has no ports gets a single roothub, the USB3 rhub is served by the main hcd, and shared_hcd stays NULL for the lifetime of the device. Every SuperSpeed port event is then thrown away as bogus behind a debug message, so devices never enumerate even though the port sees the device and its change bits stay set: 0x006a1203 Powered Connected Enabled Link:U0 PortSpeed:4 Change: CSC WRC PRC PLC Broadcom Northstar is such a controller. USB3 works there up to 5.15 and stops working from 5.19 onwards. Ask xhci_get_usb3_hcd() instead. It returns the shared hcd when there is one, the main hcd when the USB2 root hub has no ports, and NULL once the shared hcd is gone, which keeps the original meaning of the check. Tested on an Asus RT-N18U (BCM47081), which has a single roothub. Before the change nothing enumerates on the USB3 port; after it SuperSpeed devices enumerate normally over repeated connect and disconnect cycles, the change bits shown above clear, and USB2 is unaffected on both ports. Fixes: 4736ebd7fcaf ("usb: host: xhci-plat: omit shared hcd if either root hub has no ports") Cc: stable@vger.kernel.org Signed-off-by: Semih Baskan Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20260806142113.2436238-17-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci-pci: Limit VIA VL805 DMA addressing to 36 bits

2026-08-03T09:15:17+00:00

commit 1fc50f1ecde39feb4fccdaf4bc71aa6c0eb25c49 upstream. The VIA VL805/806 xHCI controller advertises AC64, but fails to handle DMA addresses at or above 0x1000000000. On systems with large amounts of RAM, this can cause USB device failures when the controller is given DMA addresses beyond its usable address width. Do not use XHCI_NO_64BIT_SUPPORT for this controller. That quirk clears the cached AC64 capability and limits DMA to 32 bits, causing unnecessary bouncing for addresses between 4GiB and 64GiB and hiding the controller's real AC64 capability from code that may need to distinguish register access width from usable DMA address width. Track the usable DMA address width separately from the AC64 capability. Initialize the generic xhci->dma_mask_bits field to 64 and let PCI quirks reduce it for controllers with narrower DMA support. Set VIA VL805/806 to 36 bits so the DMA API only hands it addresses in the range it can handle while keeping HCCPARAMS1.AC64 visible. Cc: stable@kernel.org Signed-off-by: Xincheng Zhang Link: https://patch.msgid.link/20260630-xhci-via-dma-fix-v3-1-690dcb8cf75a@ultrarisc.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: host: max3421: Reject hub port requests for non-existent ports

2026-07-24T14:03:14+00:00

[ Upstream commit 11b5c101e2fd206104b05bc92554d356989423a8 ] The `max3421_hub_control()` function handles USB hub class requests to the virtual root hub. The `GetPortStatus` case correctly rejects requests with `index != 1`, since the virtual root hub has only a single port. However, the `ClearPortFeature` and `SetPortFeature` cases lack the same check. Fix this by extending the `index != 1` rejection to both cases, matching the existing behavior of `GetPortStatus`. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Suggested-by: Alan Stern Reviewed-by: Alan Stern Signed-off-by: Seungjin Bae Link: https://patch.msgid.link/20260518224901.1887013-3-eeodqql09@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control()

2026-07-24T14:03:14+00:00

[ Upstream commit cff06b03b530ae1fe8a13e93a7848f2130e00fb4 ] The `max3421_hub_control()` function handles USB hub class requests to the virtual root hub. In the `default` branches of both the `ClearPortFeature` and `SetPortFeature` switch statements, it modifies `max3421_hcd->port_status` by left shifting 1 by the request's `value` parameter. However, it does not validate whether this shift will exceed the width of `port_status`. So if a malicious userspace task with access to the root hub via /dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue` greater than or equal to 32, the left shift operation invokes shift-out-of-bounds undefined behavior. This results in arbitrary bit corruption of `port_status`, including the normally-immutable change bits, which can bypass internal state checks and confuse the hub status. Fix this by rejecting requests whose `value` exceeds the shift width before performing the shift. This issue was found using a KLEE-based symbolic execution tool for kernel drivers that I'm currently developing. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Signed-off-by: Seungjin Bae Link: https://patch.msgid.link/20260518224901.1887013-1-eeodqql09@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: sl811-hcd: disable controller wakeup on remove

2026-07-24T14:02:50+00:00

commit 4e8ba83ac4d311992e6a4c21de5dd705010df06e upstream. sl811h_probe() enables the HCD controller device as a wakeup source after usb_add_hcd() succeeds, but sl811h_remove() removes the HCD and releases the driver resources without disabling that wakeup source. Disable controller wakeup after usb_remove_hcd() and before usb_put_hcd() so the wakeup source object is detached while the controller device pointer is still available. This issue was identified during our ongoing static-analysis research while reviewing kernel code. Fixes: 3c9740a117d4 ("usb: hcd: move controller wakeup setting initialization to individual driver") Cc: stable Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Link: https://patch.msgid.link/20260701121625.96815-1-mhun512@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: free iso schedules on failed submit

2026-07-24T14:02:49+00:00

commit b9399d25fbb34a05bbe76eeedd730f62ff2670e9 upstream. EHCI and FOTG210 isochronous submits build an ehci_iso_sched before linking the URB to the endpoint queue, and keep the staged schedule in urb->hcpriv until iso_stream_schedule() and the link helpers consume it. If the controller is no longer accessible, or usb_hcd_link_urb_to_ep() fails, submit jumps to done_not_linked before that handoff happens and leaks the staged schedule still attached to urb->hcpriv. Free the staged schedule from done_not_linked when submit fails before the URB is linked and clear urb->hcpriv after the free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an EHCI host controller with a USB isochronous device to test with, no runtime testing was able to be performed. Fixes: 8de98402652c ("[PATCH] USB: Fix USB suspend/resume crasher (#2)") Fixes: e9df41c5c589 ("USB: make HCDs responsible for managing endpoint queues") Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Cc: stable Signed-off-by: Dawei Feng Reviewed-by: Alan Stern Link: https://patch.msgid.link/20260630071419.349161-1-dawei.feng@seu.edu.cn Signed-off-by: Greg Kroah-Hartman

usb: xhci: Fix sleep in atomic context in xhci_free_streams()

2026-07-24T14:02:43+00:00

commit 42c37c4b75d38b51d84f31a8e29427f5e06a7c2a upstream. When a USB device with active stream endpoints is disconnected, xhci_free_streams() is called from the hub_event workqueue to free the stream resources. It calls xhci_free_stream_info() while holding xhci->lock with irqs disabled. xhci_free_stream_info() invokes xhci_free_stream_ctx(), which calls dma_free_coherent() for large stream context arrays. dma_free_coherent() can sleep (e.g. via vunmap), triggering a BUG when called from atomic context. Call trace: dma_free_attrs+0x174/0x220 xhci_free_stream_info+0xd0/0x11c xhci_free_streams+0x278/0x37c usb_free_streams+0x98/0xc0 usb_unbind_interface+0x1b8/0x2f8 device_release_driver_internal+0x1d4/0x2cc device_release_driver+0x18/0x28 bus_remove_device+0x160/0x1a4 device_del+0x1ec/0x350 usb_disable_device+0x98/0x214 usb_disconnect+0xf0/0x35c hub_event+0xab4/0x19ec process_one_work+0x278/0x63c Fix this by saving the stream_info pointers and clearing the ep references under the lock, then calling xhci_free_stream_info() outside the lock where sleeping is allowed. Fixes: 8df75f42f8e6 ("USB: xhci: Add memory allocation for USB3 bulk streams.") Cc: stable Signed-off-by: Lianqin Hu Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20260703144033.483286-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: tegra: Fix ghost USB device on dual-role port unplug

2026-06-19T11:39:24+00:00

[ Upstream commit 5a4c828b8b29b47534814ade26d9aee09d5101fc ] When a USB device is unplugged from the dual-role port, the device-mode path in tegra_xhci_id_work() explicitly clears both SS and HS port power via direct hub_control ClearPortFeature(POWER) calls. This preempts the xHCI controller's normal disconnect processing -- PORT_CSC is never generated, the USB core never sees the disconnect, and the device remains in its internal tree as a ghost visible in lsusb. Add an otg_set_port_power flag to control whether the dual-role switch path performs explicit port power management. SoCs that need it (Tegra124 / Tegra210 / Tegra186) set the flag; later SoCs (Tegra194 and beyond) rely on the PHY mode change to handle disconnect naturally and skip all port power calls. Within the port power path, otg_reset_sspi additionally gates the SSPI reset sequence on host-mode entry for SoCs that require it. Flags set per SoC: Tegra124, Tegra186 -> otg_set_port_power Tegra210 -> otg_set_port_power, otg_reset_sspi Tegra194 and later -> (none) [ Backport to 6.6.y: keep the host-mode snapshot in the existing tegra->lock section, retain pm_runtime_mark_last_busy() in the host port-power path, and resolve context around the SoC ops/Tegra234 entries. ] Fixes: f836e7843036 ("usb: xhci-tegra: Add OTG support") Cc: stable@vger.kernel.org Signed-off-by: Wei-Cheng Chen Link: https://patch.msgid.link/20260505112630.217704-1-weichengc@nvidia.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin