kernel/git/stable/linux.git/mm/userfaultfd.c, branch linux-5.17.y

mm: userfaultfd: fix missing cache flush in mcopy_atomic_pte() and __mcopy_atomic()

2022-05-15T18:20:53+00:00

commit 7c25a0b89a487878b0691e6524fb5a8827322194 upstream. userfaultfd calls mcopy_atomic_pte() and __mcopy_atomic() which do not do any cache flushing for the target page. Then the target page will be mapped to the user space with a different address (user address), which might have an alias issue with the kernel address used to copy the data from the user to. Fix this by insert flush_dcache_page() after copy_from_user() succeeds. Link: https://lkml.kernel.org/r/20220210123058.79206-7-songmuchun@bytedance.com Fixes: b6ebaedb4cb1 ("userfaultfd: avoid mmap_sem read recursion in mcopy_atomic") Fixes: c1a4de99fada ("userfaultfd: mcopy_atomic|mfill_zeropage: UFFDIO_COPY|UFFDIO_ZEROPAGE preparation") Signed-off-by: Muchun Song Cc: Axel Rasmussen Cc: David Rientjes Cc: Fam Zheng Cc: Kirill A. Shutemov Cc: Lars Persson Cc: Mike Kravetz Cc: Peter Xu Cc: Xiongchun Duan Cc: Zi Yan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

userfaultfd: mark uffd_wp regardless of VM_WRITE flag

2022-04-27T12:41:05+00:00

[ Upstream commit 0e88904cb700a9654c9f0d9ca4967e761e7c9ee8 ] When a PTE is set by UFFD operations such as UFFDIO_COPY, the PTE is currently only marked as write-protected if the VMA has VM_WRITE flag set. This seems incorrect or at least would be unexpected by the users. Consider the following sequence of operations that are being performed on a certain page: mprotect(PROT_READ) UFFDIO_COPY(UFFDIO_COPY_MODE_WP) mprotect(PROT_READ|PROT_WRITE) At this point the user would expect to still get UFFD notification when the page is accessed for write, but the user would not get one, since the PTE was not marked as UFFD_WP during UFFDIO_COPY. Fix it by always marking PTEs as UFFD_WP regardless on the write-permission in the VMA flags. Link: https://lkml.kernel.org/r/20220217211602.2769-1-namit@vmware.com Fixes: 292924b26024 ("userfaultfd: wp: apply _PAGE_UFFD_WP bit") Signed-off-by: Nadav Amit Acked-by: Peter Xu Cc: Axel Rasmussen Cc: Mike Rapoport Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

mm: shmem: don't truncate page if memory failure happens

2022-01-15T14:30:26+00:00

The current behavior of memory failure is to truncate the page cache regardless of dirty or clean. If the page is dirty the later access will get the obsolete data from disk without any notification to the users. This may cause silent data loss. It is even worse for shmem since shmem is in-memory filesystem, truncating page cache means discarding data blocks. The later read would return all zero. The right approach is to keep the corrupted page in page cache, any later access would return error for syscalls or SIGBUS for page fault, until the file is truncated, hole punched or removed. The regular storage backed filesystems would be more complicated so this patch is focused on shmem. This also unblock the support for soft offlining shmem THP. [akpm@linux-foundation.org: coding style fixes] [arnd@arndb.de: fix uninitialized variable use in me_pagecache_clean()] Link: https://lkml.kernel.org/r/20211022064748.4173718-1-arnd@kernel.org [Fix invalid pointer dereference in shmem_read_mapping_page_gfp() with a slight different implementation from what Ajay Garg and Muchun Song proposed and reworked the error handling of shmem_write_begin() suggested by Linus] Link: https://lore.kernel.org/linux-mm/20211111084617.6746-1-ajaygargnsit@gmail.com/ Link: https://lkml.kernel.org/r/20211020210755.23964-6-shy828301@gmail.com Link: https://lkml.kernel.org/r/20211116193247.21102-1-shy828301@gmail.com Signed-off-by: Yang Shi Signed-off-by: Arnd Bergmann Cc: Hugh Dickins Cc: Kirill A. Shutemov Cc: Matthew Wilcox Cc: Naoya Horiguchi Cc: Oscar Salvador Cc: Peter Xu Cc: Ajay Garg Cc: Muchun Song Cc: Andy Lavr Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Revert "mm: shmem: don't truncate page if memory failure happens"

2021-11-13T20:03:03+00:00

This reverts commit b9d02f1bdd98f38e6e5ecacc9786a8f58f3f8b2c. The error handling of that patch was fundamentally broken, and it needs to be entirely re-done. For example, in shmem_write_begin() it would call shmem_getpage(), then ignore the error return from that, and look at the page pointer contents instead. And in shmem_read_mapping_page_gfp(), the patch tested PageHWPoison() on a page pointer that two lines earlier had potentially been set as an error pointer. These issues could be individually fixed, but when it has this many issues, I'm just reverting it instead of waiting for fixes. Link: https://lore.kernel.org/linux-mm/20211111084617.6746-1-ajaygargnsit@gmail.com/ Reported-by: Ajay Garg Reported-by: Jens Axboe Cc: Yang Shi Cc: Arnd Bergmann Cc: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'akpm' (patches from Andrew)

2021-11-06T21:08:17+00:00

Merge misc updates from Andrew Morton: "257 patches. Subsystems affected by this patch series: scripts, ocfs2, vfs, and mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache, gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools, memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm, vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram, cleanups, kfence, and damon)" * emailed patches from Andrew Morton : (257 commits) mm/damon: remove return value from before_terminate callback mm/damon: fix a few spelling mistakes in comments and a pr_debug message mm/damon: simplify stop mechanism Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions Docs/admin-guide/mm/damon/start: simplify the content Docs/admin-guide/mm/damon/start: fix a wrong link Docs/admin-guide/mm/damon/start: fix wrong example commands mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on mm/damon: remove unnecessary variable initialization Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM) selftests/damon: support watermarks mm/damon/dbgfs: support watermarks mm/damon/schemes: activate schemes based on a watermarks mechanism tools/selftests/damon: update for regions prioritization of schemes mm/damon/dbgfs: support prioritization weights mm/damon/vaddr,paddr: support pageout prioritization mm/damon/schemes: prioritize regions within the quotas mm/damon/selftests: support schemes quotas mm/damon/dbgfs: support quotas of schemes ...

mm: shmem: don't truncate page if memory failure happens

2021-11-06T20:30:38+00:00

The current behavior of memory failure is to truncate the page cache regardless of dirty or clean. If the page is dirty the later access will get the obsolete data from disk without any notification to the users. This may cause silent data loss. It is even worse for shmem since shmem is in-memory filesystem, truncating page cache means discarding data blocks. The later read would return all zero. The right approach is to keep the corrupted page in page cache, any later access would return error for syscalls or SIGBUS for page fault, until the file is truncated, hole punched or removed. The regular storage backed filesystems would be more complicated so this patch is focused on shmem. This also unblock the support for soft offlining shmem THP. [arnd@arndb.de: fix uninitialized variable use in me_pagecache_clean()] Link: https://lkml.kernel.org/r/20211022064748.4173718-1-arnd@kernel.org Link: https://lkml.kernel.org/r/20211020210755.23964-6-shy828301@gmail.com Signed-off-by: Yang Shi Signed-off-by: Arnd Bergmann Cc: Hugh Dickins Cc: Kirill A. Shutemov Cc: Matthew Wilcox Cc: Naoya Horiguchi Cc: Oscar Salvador Cc: Peter Xu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm/shmem: unconditionally set pte dirty in mfill_atomic_install_pte

2021-11-06T20:30:36+00:00

Patch series "mm: A few cleanup patches around zap, shmem and uffd", v4. IMHO all of them are very nice cleanups to existing code already, they're all small and self-contained. They'll be needed by uffd-wp coming series. This patch (of 4): It was conditionally done previously, as there's one shmem special case that we use SetPageDirty() instead. However that's not necessary and it should be easier and cleaner to do it unconditionally in mfill_atomic_install_pte(). The most recent discussion about this is here, where Hugh explained the history of SetPageDirty() and why it's possible that it's not required at all: https://lore.kernel.org/lkml/alpine.LSU.2.11.2104121657050.1097@eggly.anvils/ Currently mfill_atomic_install_pte() has three callers: 1. shmem_mfill_atomic_pte 2. mcopy_atomic_pte 3. mcontinue_atomic_pte After the change: case (1) should have its SetPageDirty replaced by the dirty bit on pte (so we unify them together, finally), case (2) should have no functional change at all as it has page_in_cache==false, case (3) may add a dirty bit to the pte. However since case (3) is UFFDIO_CONTINUE for shmem, it's merely 100% sure the page is dirty after all because UFFDIO_CONTINUE normally requires another process to modify the page cache and kick the faulted thread, so should not make a real difference either. This should make it much easier to follow on which case will set dirty for uffd, as we'll simply set it all now for all uffd related ioctls. Meanwhile, no special handling of SetPageDirty() if there's no need. Link: https://lkml.kernel.org/r/20210915181456.10739-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210915181456.10739-2-peterx@redhat.com Signed-off-by: Peter Xu Reviewed-by: Axel Rasmussen Cc: Hugh Dickins Cc: Andrea Arcangeli Cc: Liam Howlett Cc: Mike Rapoport Cc: Yang Shi Cc: David Hildenbrand Cc: "Kirill A . Shutemov" Cc: Jerome Glisse Cc: Alistair Popple Cc: Miaohe Lin Cc: Matthew Wilcox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm/memcg: Convert mem_cgroup_charge() to take a folio

2021-09-27T13:27:31+00:00

Convert all callers of mem_cgroup_charge() to call page_folio() on the page they're currently passing in. Many of them will be converted to use folios themselves soon. Signed-off-by: Matthew Wilcox (Oracle) Reviewed-by: Christoph Hellwig Reviewed-by: David Howells Acked-by: Vlastimil Babka

userfaultfd: change mmap_changing to atomic

2021-09-03T16:58:16+00:00

Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit Cc: Mike Rapoport Cc: Peter Xu Cc: Axel Rasmussen Cc: Alexander Viro Cc: Andrea Arcangeli Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

userfaultfd/shmem: modify shmem_mfill_atomic_pte to use install_pte()

2021-07-01T03:47:27+00:00

In a previous commit, we added the mfill_atomic_install_pte() helper. This helper does the job of setting up PTEs for an existing page, to map it into a given VMA. It deals with both the anon and shmem cases, as well as the shared and private cases. In other words, shmem_mfill_atomic_pte() duplicates a case it already handles. So, expose it, and let shmem_mfill_atomic_pte() use it directly, to reduce code duplication. This requires that we refactor shmem_mfill_atomic_pte() a bit: Instead of doing accounting (shmem_recalc_inode() et al) part-way through the PTE setup, do it afterward. This frees up mfill_atomic_install_pte() from having to care about this accounting, and means we don't need to e.g. shmem_uncharge() in the error path. A side effect is this switches shmem_mfill_atomic_pte() to use lru_cache_add_inactive_or_unevictable() instead of just lru_cache_add(). This wrapper does some extra accounting in an exceptional case, if appropriate, so it's actually the more correct thing to use. Link: https://lkml.kernel.org/r/20210503180737.2487560-7-axelrasmussen@google.com Signed-off-by: Axel Rasmussen Reviewed-by: Peter Xu Acked-by: Hugh Dickins Cc: Alexander Viro Cc: Andrea Arcangeli Cc: Brian Geffon Cc: "Dr . David Alan Gilbert" Cc: Jerome Glisse Cc: Joe Perches Cc: Kirill A. Shutemov Cc: Lokesh Gidra Cc: Mike Kravetz Cc: Mike Rapoport Cc: Mina Almasry Cc: Oliver Upton Cc: Shaohua Li Cc: Shuah Khan Cc: Stephen Rothwell Cc: Wang Qing Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds