| Age | Commit message (Collapse) | Author |
|---|
|
Link: https://lore.kernel.org/r/20260904045734.806166532@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20260905115627.670276262@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f5407e9b697c940e78b27ff63c6e14d8d171adc3 ]
Patch series "Fix incorrect access of hugetlb pte entries", v3.
There are various places which use ptep_get() to get the pte entry
corresponding to a hugetlb folio. Some arches (like s390) have special
handling to compute the pteval, so they provide huge_ptep_get(). Use this
helper consistently.
Additionally, some code paths may provide huge_ptep_get with an unaligned
address. This is a problem on arm64 (I checked other arches and it looks
fine for them), which is fixed in patch 1. The fix is made to be
backport-friendly: the cleaner fix would be to perhaps pass the hstate to
huge_ptep_get() - that is wider churn and we can do that later.
This patch (of 5):
try_to_unmap_one() handles hugetlb folios when memory failure needs to
replace a poisoned hugetlb mapping with a hwpoison entry. In that case
page_vma_mapped_walk() returns the pte pointer to the hugetlb folio in
pvmw.pte, but the code reads it with ptep_get().
On arches which provide their own huge_ptep_get() to dereference a huge
pte pointer, accessing via ptep_get() would cause pte_pfn(), pte_present()
etc to misbehave.
It is not clear whether this has a trivially visible effect to userspace.
Just use huge_ptep_get() for dereferencing a huge pte pointer.
Link: https://lore.kernel.org/20260703114202.365553-1-dev.jain@arm.com
Link: https://lore.kernel.org/20260703114202.365553-3-dev.jain@arm.com
Fixes: c7ab0d2fdc84 ("mm: convert try_to_unmap_one() to use page_vma_mapped_walk()")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reported-by: David Hildenbrand <david@kernel.org>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Harry Yoo <harry@kernel.org>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jann Horn <jannh@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Jun'ichi "Nick" Nomura <j-nomura@ce.jp.nec.com>
Cc: Kiryl Shutsemau <kas@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit aa62204cb680d8ff32497181fc9e0dac4956f7e5 ]
PMD 'non-swap' swap entries are currently used for PMD-level migration
entries and device private entries.
To add to the confusion in this terminology we use is_swap_pmd() in an
inconsistent way similar to how is_swap_pte() was being used - sometimes
adopting the convention that !pmd_none(), !pmd_present() implies PMD 'swap'
entry, sometimes not.
This patch handles the low-hanging fruit of cases where we can simply
substitute other predicates for is_swap_pmd().
No functional change intended.
Link: https://lkml.kernel.org/r/8a1704b36a009c18032d5bea4cb68e71448fbbe5.1762812360.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: f5407e9b697c ("mm/rmap: use huge_ptep_get() in try_to_unmap_one()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9a3f43b30373c61477d0d3ab52946c05f9492bf9 upstream.
Commit 833740a2333c ("platform/chrome: sensorhub: Bound the EC-reported
sensor number") evaluated the `sensor_num` against the bounds limit even
for timestamp events. A timestamp event typically has a `sensor_num` of
0xff [1], causing the driver to flag it as invalid and skip to the next
event.
As a result, we'd see a flooding of "Invalid sensor number 255 from EC"
warning logs and these timestamp events were being dropped.
Move the bounds-check into cros_ec_sensor_ring_process_event() and
evaluate it only after standalone timestamp events have already been
processed and returned early.
[1] https://crrev.com/219ca6ef82ba266da788b673ee4ad50bd3ea1285/common/motion_sense_fifo.c#427
Fixes: 833740a2333c ("platform/chrome: sensorhub: Bound the EC-reported sensor number")
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20260715024454.4127571-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a5a5ed23b1340ff0f32a14a7ca8585f7c4e9b2e2 upstream.
In udf_do_extend_file() the total extent length is rounded up to a block
boundary with:
iinfo->i_lenExtents = (iinfo->i_lenExtents + sb->s_blocksize - 1) &
~(sb->s_blocksize - 1);
i_lenExtents is a __u64, but sb->s_blocksize is unsigned long. On 32-bit
kernels unsigned long is 32-bit, so ~(sb->s_blocksize - 1) is a 32-bit
value (e.g. 0xfffff800 for a 2 KiB block) that is zero-extended in the AND,
clearing the upper 32 bits of i_lenExtents. For UDF files whose total
extent length exceeds 4 GiB this truncates i_lenExtents when the file is
extended, corrupting the tracked extent length.
Cast the block size to 64-bit before forming the mask. 64-bit kernels are
unaffected.
Fixes: 48d6d8ff7dca ("udf: cache struct udf_inode_info")
Cc: stable@vger.kernel.org
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Link: https://patch.msgid.link/20260722082425.213311-1-zhanxusheng@xiaomi.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c793bbfc4a0a9f5a66978fc91559e9681748dbeb upstream.
When timers are migrated away from an offline CPU the debugobjects state
gets corrupted. The timer is accounted as inactive on deletion, but the
enqueue on the alive CPU lacks the activation call.
That used to work, but got broken when the trace point and the debug
objects call got separated. That change missed to fixup
migrate_timer_list().
Add the missing debug_timer_activate() invocation to fix it.
Fixes: dc1e7dc5ac62 ("timer: Move trace point to get proper index")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/87bjb0l7ha.ffs@fw13
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f58a5335cdd14b3fb5f2a5d3763dee1f5cba1d3 upstream.
parse() hands nla_strscpy() len as dstsize, and nla_strscpy() copies at
most dstsize - 1 bytes. When the attr payload comes in without a trailing
NUL, srclen == len >= dstsize and the last character of the cpumask string
gets cut off. Register "0-15" and you are silently listening on "0-1",
exit data for the rest never shows up.
The bug only bites when the sender doesn't NUL terminate the payload;
senders that include the NUL were always fine (srclen gets decremented for
the trailing NUL, so srclen < dstsize). Thats probably why this survived
20 years. And the policy is NLA_STRING, not NLA_NUL_STRING, so a payload
without the trailing NUL is legit input here.
Skip the kmalloc/nla_strscpy dance entirely and use nla_strdup(), which
already allocates srclen + 1 and terminates. The nla_len() bounds checks
stay as they were.
Link: https://lore.kernel.org/EC49FE41-7F5F-41E0-A07A-ABEB8ECA514D@grrlz.net
Fixes: f9fd8914c1ac ("[PATCH] per-task delay accounting taskstats interface: control exit data through cpumasks")
Signed-off-by: Bradley Morgan <include@grrlz.net>
Reported-by: Oleg Deomi <oleg.deomi@gmail.com>
Closes: https://lore.kernel.org/CAByWkfZ6b1=3H9pwkz-dDQOs9cZaF-HYQ6b9Yb0=Hq2r1Vv_Pw@mail.gmail.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fedc88e38ce979a720cd2de042578cb5df3dc8de upstream.
When inspecting the credentials of another task, objective credentials
(->real_cred, accessed with __task_cred()) must always be used.
Accessing ->cred on a non-current task is forbidden unless that task is
being created or destroyed; a task is allowed to change its own ->cred
pointer with no synchronization, and changing ->cred should only affect the
current syscall.
smack_file_send_sigiotask() was accessing both sets of credentials: First
tsk->cred, then __task_cred(tsk).
Fix it, always access the objective credentials here.
I have tested that this bug can lead to a KASAN-reported UAF of struct cred
in smack_file_send_sigiotask(), and that this fix prevents the race.
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d19cdc167e696714509e87d3f7ae765b6e164589 upstream.
send_signal_locked() rewrites sender ids for the target namespace. Group
sends reuse the same siginfo, so one recipient can affect the next.
Copy the siginfo before changing it.
Link: https://lore.kernel.org/86a8857d58d43ee26a8b365b837fd24830343494.1782159692.git.include@grrlz.net
Fixes: 7a0cf094944e ("signal: Correct namespace fixups of si_pid and si_uid")
Signed-off-by: Bradley Morgan <include@grrlz.net>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Adrian Huang <adrianhuang0701@gmail.com>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit de508ece1d37cdbbbfa52f074954310f9b066b13 upstream.
If a machine has multiple graphic cards, detect the graphic card which is used
to display firmware messages and use that one as the default graphic card for
sticon and fbcon.
On parisc machines the default graphic card used for BCH (boot console
handler, aka BIOS menu) is stored in the stable storage (equivalent to CMOS
storage on x86) or in the console path in page zero. Extract that path and
store it as default STI path for later comparism. Take care that the graphic
card can be a GSC or a PCI card which use different path strings.
Increase max string size for default_sti_path to 32 chars as the
print_pa_hwpath() function formats a hardware path using unbounded sprintf
calls for up to 6 bus converter components and 1 module component (e.g.,
255/255/...), which can produce a string up to 28 bytes long.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 705c4ed0643366963547b2616d53165f2519c81f upstream.
i2c_nuvoton_wait_for_stat() enables the IRQ before waiting for the
interrupt handler to report a status change. If the wait times out, or is
interrupted before the handler runs, the function returns without
balancing the enable_irq() call.
Disable the IRQ before leaving the failed wait path. Also preserve an
interrupted wait's original error code instead of converting it to
-ETIMEDOUT inside the helper.
Cc: stable@vger.kernel.org # v5.10+
Fixes: 4c336e4b1556 ("tpm: Add support for the Nuvoton NPCT501 I2C TPM")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20260626091653.54929-1-mhun512@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 789763523fb43cdc328de5cb5dcd19240ccf90d8 upstream.
XArray operations that allocate xa_nodes, such as xas_nomem() and
xas_alloc(), add __GFP_ACCOUNT when the array has XA_FLAGS_ACCOUNT set.
This charges the allocated memory and avoids the workingset convergence
issue described by commit 7b785645e8f13 ("mm: fix page cache convergence
regression").
xas_split_alloc() does not add _GFP_ACCOUNT when XA_FLAGS_ACCOUNT is
present. Fix it.
Link: https://lore.kernel.org/20260804-add-gfp_account-to-xas_split_alloc-v3-2-38cb3ff325c5@nvidia.com
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 169ae5e65e5aaf213b6a578f6478a9fd2e523606 upstream.
w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire
to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the
device. The downstream slave puts a length byte in buf[0]. The driver
then reads that many bytes into buf[1] with w1_f19_i2c_read().
buf[0] is controlled by the device and can be 0 to 255.
w1_f19_i2c_read() only rejects a zero count. The caller buffer is
I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read
run past it, up to about 222 bytes out of bounds.
The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That
check runs after master_xfer returns. By then the write is already
done. i2c-algo-bit rejects an oversize length before it copies, and
returns -EPROTO.
Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the
same way i2c-algo-bit does.
Fixes: ebc4768ac497 ("add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20260629121043.199487-1-maoyixie.tju@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 728836ebca239810f164262b10211ef59182f811 upstream.
virtio_vsock_remove() stops the virtqueues and then flushes each work
item before freeing the enclosing virtio_vsock. The current order does
not account for dependencies between those items: tx_work may queue
send_pkt_work, and send_pkt_work may queue rx_work.
In particular, send_pkt_work can set restart_rx and release tx_lock.
The remove path can then stop the queues and flush rx_work before
send_pkt_work queues it. Although the later send_pkt_work flush waits
for that producer to finish, nothing waits for the newly queued rx_work,
so kfree(vsock) can race with it.
KASAN reported:
BUG: KASAN: slab-use-after-free in
virtio_transport_rx_work+0x487/0x4b0
Read of size 8 at addr ffff888114c2b008 by task kworker/1:1/47
Workqueue: virtio_vsock virtio_transport_rx_work
Call Trace:
virtio_transport_rx_work+0x487/0x4b0
process_one_work+0x688/0x1120
worker_thread+0x45b/0xd10
Allocated by task 1:
virtio_vsock_probe+0xef/0x6b0
Freed by task 84:
kfree+0x131/0x3c0
virtio_vsock_remove+0xd1/0x100
Flush the works in producer-to-consumer order. virtio_vsock_vqs_del()
has already disabled the queue callbacks and cleared the run flags, so
after tx_work and send_pkt_work are drained, no source remains that can
queue rx_work after its flush.
Fixes: 0ea9e1d3a9e3 ("VSOCK: Introduce virtio_transport.ko")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Link: https://patch.msgid.link/20260822164556.3750959-1-nicoyip.dev@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bda8324270b1ac91bfba1df8928e0570e29759e8 upstream.
mt7615_suspend() acquired the mt76 mutex and then called
cancel_delayed_work_sync() on mac_work. mt7615_mac_work() acquires the
same mutex via mt7615_mutex_acquire() at the top of the worker, so if
mac_work is already running and blocked on the mutex, the suspend path
deadlocks waiting for the work it holds the mutex against.
Flush scan_work and mac_work before taking the mutex, matching the
suspend paths in mt7921 and mt7925. scan_work only takes the mt76
spinlock, but moving it keeps the sequence consistent. This also keeps
mac_work from running over an already suspended HIF, which the previous
split (async cancel under the lock, sync cancel after release) would
have allowed.
Fixes: c6bf20109a3f ("mt76: mt7615: add WoW support")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260612041331.2596331-1-runyu.xiao@seu.edu.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e779df4806cd29cbcca5c9dc0a1073662c76b889 upstream.
rtw_pci_probe() allocates PCI resources through
rtw_pci_setup_resource() before it sets up NAPI. If
rtw_pci_napi_init() fails, the error path jumps straight to
err_pci_declaim and skips rtw_pci_destroy(), leaving the PCI
resources allocated by rtw_pci_setup_resource() behind.
Add a dedicated cleanup label for the NAPI setup failure path so probe
destroys the PCI resources.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing current
mainline kernels. The tool is still under development and is not yet
publicly available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable rtw88 PCI board to test with, no runtime testing was able to be
performed.
Fixes: d0bcb10e7b94 ("wifi: rtw88: Un-embed dummy device")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260617013502.114057-1-dawei.feng@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9f2948010764d708bda27369d09ce6f194abe8e3 upstream.
The skb passed to the rtw_hci_tx_write() is expected to be freed when
the function fails, but the error path in rtw_txq_push_skb() does not
free the skb before returning. This can lead to a memory leak in
rtw_txq_push() where a dequeued skb is passed to rtw_txq_push_skb().
Fixes: aaab5d0e6737 ("rtw88: kick off TX packets once for higher efficiency")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260727064223.61836-1-nihaal@cse.iitm.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6496ce90845df2d22fb8e8ed235cd2936fad41c8 upstream.
The memory allocated inside rtl92du_init_shared_data() is not freed in
any of the subsequent error paths in rtl92du_init_sw_vars().
Fix that by adding a call to rtl92du_deinit_shared_data() in the error
path.
Fixes: b5dc8873b6ff ("wifi: rtlwifi: Add rtl8192du/sw.c")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260723114539.136986-1-nihaal@cse.iitm.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed4f05d9f2f42fd866f55108db8123eefcc5fb33 upstream.
rtl92du_tx_fill_desc() uses ieee80211_get_tid() to read the QoS TID
from the 802.11 header and then uses it as an index into
sta_entry->tids[]. ieee80211_get_tid() returns the low 4-bit QoS TID
value, so the result can be in the range 0..15.
rtlwifi only allocates MAX_TID_COUNT entries for sta_entry->tids[], and
MAX_TID_COUNT is 9. A QoS TID greater than 8 therefore indexes past the
aggregation state array. Keep the default RTL_AGG_STOP state for
out-of-range TIDs, matching rtl92cu_tx_fill_desc().
This issue was detected by our static analysis tool and confirmed by
manual audit. UBSAN validation for the same bug pattern reports an
array-index-out-of-bounds access with index 10 for type
'rtl_tid_data [9]'.
Fixes: 8321424134a4 ("wifi: rtlwifi: Add rtl8192du/trx.{c,h}")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260620025632.46206-1-runyu.xiao@seu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 799b5f45cb8194ebd06c9c89e0afdad5bedd2cc5 upstream.
Commit 7738a7ab9d12 ("misc: eeprom: eeprom_93cx6: Add quirk for extra
read clock cycle") added extra 'quirk' field to struct eeprom_93cx6.
Many existing users of eeprom_93cx6, including rtl818x drivers, allocate
the structure on the stack without initializing all fields. As a result,
the added quirk field has an undefined value and can randomly cause
reading wrong data from the EEPROM.
Fix by initializing the structures with {}.
Fixes: 7738a7ab9d12 ("misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycle")
Cc: stable@kernel.org # v6.13+
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260723110640.8588-1-stf_xl@wp.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef06882c7d8a7400b67d0d003b1008093dd589ed upstream.
mwifiex synchronous commands keep the caller-provided data buffer in
cmd_node->data_buf. Several callers pass stack-allocated objects there.
If wait_event_interruptible_timeout() is interrupted, the caller can
return and release that stack object while the firmware command is still
the current command. A late firmware response then reaches the normal
response handler, which can copy data through cmd_node->data_buf into the
stale stack address.
This fixes a stack corruption observed during repeated association and
disassociation cycles. The panic trace showed the command wait being
interrupted immediately before a bad pointer dereference:
cmd_wait_q terminated: -512
Unable to handle kernel paging request at virtual address 002c583837384662
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted
...
Tainted: [M]=MACHINE_CHECK
The fault address decodes as little-endian ASCII:
0x002c583837384662 -> "bF878X,\0"
which is a fragment of the VERSION_EXT firmware string exposed as
debugfs "verext":
w8997o-V4, RF878X, FP92, 16.92.21.p153.7
The same runs also showed corrupted control data containing:
0x2400372e333531 -> "153.7\0$"
which is the tail of the same VERSION_EXT string. This points at a late
VERSION_EXT response writing through a stale stack-backed data_buf after
the interrupted wait returned.
After cancelling pending commands on an interrupted or timed-out wait,
detach the caller-owned data buffer from the still-current command. This
preserves the existing command cancellation behaviour while preventing a
late response from writing through a pointer whose lifetime ended with the
waiting caller.
Tested on an i.MX8MP board using an 88W8997.
Cc: stable@vger.kernel.org
Fixes: 3d026d09b28d ("mwifiex: cancel pending commands for signal")
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Link: https://patch.msgid.link/20260724203320.78793-1-festevam@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a78446ee6fae86ac8733f120e3ffce2e5d9384f5 upstream.
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ss support which is one of the only remaining ones.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. Also, it had a buffer
overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'.
There's no point in fixing these bugs separately only to remove the code
anyway, so this commit is marked with Fixes and Cc stable.
Fixes: ac2614d721de ("crypto: sun8i-ss - Add support for the PRNG")
Cc: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 011556f71d094da61379ae3672692cae2795304e upstream.
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ce support which is one of the only remaining ones.
Note that the sun8i-ce support for hwrng remains in place. That is the
interface that actually matters.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. There's no point in fixing
this separately only to remove the code anyway, so this commit is marked
with Fixes and Cc stable.
Fixes: 5eb7e9468884 ("crypto: sun8i-ce - Add support for the PRNG")
Cc: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6c080026ecc17eecb103f8927c64ea73a74bb818 upstream.
rtl8xxxu arms rx_urb_wq from the RX completion path:
rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which
queues it on rx_urb_pending_list and, once the list grows past
RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker
rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through
container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(),
which anchors it on rx_anchor and dereferences priv->udev.
rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_watchdog,
update_beacon_work) but never cancels rx_urb_wq, so a worker armed during
the last burst of RX traffic can run rtl8xxxu_rx_urb_work() after
rtl8xxxu_disconnect() has called ieee80211_free_hw(), which frees priv,
producing a use-after-free. The window opens under active RX traffic
(pending count above the watermark) followed by a disconnect.
There are two teardown races to close:
* rtl8xxxu_queue_rx_urb() decided whether to enqueue under rx_urb_lock
but called schedule_work() after dropping the lock. A completion
that observed shutdown == false and released the lock could then call
schedule_work() after rtl8xxxu_stop() had set shutdown and
cancel_work_sync() had already returned, arming the worker to run
after the teardown. Move schedule_work() under the same !shutdown
branch so the arming decision is atomic with the shutdown check.
* rtl8xxxu_rx_urb_work() anchors every URB it drained back onto
rx_anchor through rtl8xxxu_submit_rx_urb(). A worker still running
when usb_kill_anchored_urbs(&priv->rx_anchor) returned would submit a
URB that escaped the kill. In rtl8xxxu_stop(), call
cancel_work_sync(&priv->rx_urb_wq) before the kill so the worker is
drained first.
After priv->shutdown is set under rx_urb_lock, completions can no longer
queue rx_urb_wq. cancel_work_sync() then drains the last queued or running
worker, and the following usb_kill_anchored_urbs() kills the URBs it may
have submitted.
rtl8xxxu_disconnect() is covered because ieee80211_unregister_hw()
guarantees .stop() runs for a live interface before ieee80211_free_hw()
frees priv. The probe error path needs no cancel: rx_urb_wq is
INIT_WORK()'d there but cannot have been scheduled, since no URB is
submitted before ieee80211_register_hw() succeeds.
This bug was found by static analysis.
Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260630033117.3377-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d10db8e94fcb23a799789aaa696b4d8f937e207 upstream.
The memory allocated for buf is not freed in some of the error paths in
brcmf_sdio_read_control(). Fix that by adding vfree() calls.
Cc: stable@vger.kernel.org
Fixes: dd43a01c5cdb ("brcmfmac: use dynamically allocated control frame buffer")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
[arend: rework as suggested by Johannes]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260803093506.1647790-1-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e2bda39d7f9f285ec803e200b5c1f17143d0b483 upstream.
svc_i3c_master_handle_ibi() reads the IBI payload from the RX FIFO into
the IBI slot. The loop is bounded by the hardware FIFO size
(SVC_I3C_FIFO_SIZE), not by the slot size.
slot->data points into the IBI pool, which i3c_generic_ibi_alloc_pool()
sizes at max_payload_len per slot. svc_i3c_master_request_ibi() only
rejects a max_payload_len larger than SVC_I3C_FIFO_SIZE, so a driver can
request a smaller one. mctp-i3c requests 1. Each readsb() then copies the
controller RXCOUNT bytes (up to 31) with no check against the slot size.
A device that sends more bytes than the slot holds writes past
slot->data, an out-of-bounds write into the IBI pool.
Bound the loop by dev->ibi->max_payload_len and clamp each read to the
space left in the slot, the same way dw-i3c does. A device can still send
more than the requested payload. Flush the leftover bytes from the RX FIFO
so they do not leak into the next transfer.
Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc: stable@vger.kernel.org
Co-developed-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/178227747353.2931373.15868718612134648277@maoyixie.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d2c743efd2d1ee64e94324664808f623dd865872 upstream.
i3c_master_unregister_i3c_devs() clears i3cdev->dev->desc before
calling device_unregister(). During device_unregister(),
device_del() emits a KOBJ_REMOVE uevent and unbinds the driver while
the device descriptor is still expected to be valid. As a result,
i3c_device_uevent() and a racing modalias_show() can observe a NULL
desc and fall back to an uninitialized stack struct i3c_device_info,
leaking kernel stack contents in the generated modalias. Driver
.remove() callbacks may also encounter an unexpected NULL desc during
unbind.
Keep desc valid until device_unregister() has completed. Since
device_unregister() drops the device reference and may free the device,
take an extra reference with get_device() before unregistering. Clear
desc afterwards and release the extra reference with put_device().
This preserves the release-time invariant that desc must be NULL while
avoiding both the information leak and a potential use-after-free from
writing desc after the device has been released.
Reported-by: sashiko-bot@kernel.org
Link: https://lore.kernel.org/linux-i3c/20260702190003.8BF741F000E9@smtp.kernel.org/
Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260723075747.34049-1-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c7391ebe33162c7962b313caea4d8e6b0bc2a671 upstream.
switch_region_table_read() accesses the region table with READ_ONCE()
and is called from the lockless switch_map() IO path. However,
switch_region_table_write() stores to the same array with a plain
assignment. This results in an inconsistent access pattern for a
lockless shared variable and may trigger data race reports.
Use WRITE_ONCE() to pair with the existing READ_ONCE() in
switch_region_table_read().
Cc: stable@vger.kernel.org
Fixes: 99eb1908e643 ("dm switch: factor out switch_region_table_read")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cc87e26d9cce22061dc21e51e11afef29dbbc36a upstream.
If "dm_kvzalloc(percpu_alloc_size, cpu_to_node(cpu))" fails, the code
jumps to the "out" label and calls dm_stat_free. dm_stat_free does
"for_each_possible_cpu(cpu) { dm_kvfree(s->stat_percpu[cpu][0].histogram,
s->histogram_alloc_size);", which crashes with NULL pointer dereference
if s->stat_percpu[cpu] is NULL.
This commit fixes the bug by testing s->stat_percpu[cpu] for NULL before
using it.
Reported-by: Junzhe Yu <junzheyu1@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fd2ed4d25270 ("dm: add statistics support")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f2b1cb39d5ccab090d8353788f186f7e7a1fffd4 upstream.
When building ARCH=riscv using clang with CONFIG_FORTIFY_SOURCE and
CONFIG_UBSAN_BOUNDS enabled, CONFIG_NR_CPUS > 64, and the default value of
2 for CONFIG_NODES_SHIFT, there is a compiletime warning from the fortify
routines.
In file included from mm/arch_numa.c:11:
In file included from include/linux/acpi.h:14:
In file included from include/linux/resource_ext.h:11:
In file included from include/linux/slab.h:17:
In file included from include/linux/gfp.h:7:
In file included from include/linux/mmzone.h:8:
In file included from include/linux/spinlock.h:60:
In file included from include/linux/interrupt_rc.h:17:
In file included from include/linux/smp.h:13:
In file included from include/linux/cpumask.h:11:
In file included from include/linux/bitmap.h:13:
In file included from include/linux/string.h:383:
include/linux/fortify-string.h:430:4: warning: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribue-warning]
430 | __write_overflow_field(p_size_field, size);
| ^
include/linux/fortify-string.h:430:4: note: called by function 'fortify_memset_chk(unsigned long, unsigned long, unsigned long)'
include/linux/bitmap.h:248:3: note: inlined by function 'setup_node_to_cpumask_map'
248 | memset(dst, 0, len);
| ^
include/linux/fortify-string.h:462:25: note: expanded from macro 'memset'
462 | #define memset(p, c, s) __fortify_memset_chk(p, c, s, \
| ^
include/linux/fortify-string.h:453:2: note: expanded from macro '__fortify_memset_chk'
453 | fortify_memset_chk(__fortify_size, p_size, p_size_field), \
| ^
include/linux/fortify-string.h:430:4: note: use '-gline-directives-only' (implied by '-g1') or higher for more accurate inlining chain locations
430 | __write_overflow_field(p_size_field, size);
| ^
1 warning generated.
In this configuration, MAX_NUMNODES is 4. clang unrolls the for loop in
setup_node_to_cpumask_map() past this, which triggers the fortify check
when accessing node_to_cpumask_map on the theoretical fifth loop iteration
because it would be an out of bounds write.
Make it clear to clang that nr_node_ids is bounded by MAX_NUMNODES due to
the logic in setup_nr_node_ids() by early returning in
setup_node_to_cpumask_map() should that condition be violated.
Link: https://lore.kernel.org/20260813-arch_numa-avoid-fortify-warning-v2-1-093ad97a78df@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2174
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 86bdd16e8f390d51bae9e77a4bc4164ca2f580fe ]
The Hyper-V vPCI MSI irqchip never installs an irq_retrigger() callback.
On CPU hot-unplug fixup_irqs() migrates the interrupts which are affine to
the outgoing CPU to a new target. If an interrupt still has its pending bit
set in the outgoing CPU's IRR at that point, fixup_irqs() resends it on the
new target through the irqchip's irq_retrigger() callback. As the Hyper-V
PCI/MSI chip does not provide that callback, the pending interrupt is
silently dropped, which can result in lost interrupts, stalls and "No irq
handler for vector" messages during CPU hotplug.
Install irq_chip_retrigger_hierarchy() as the irq_retrigger() callback for
the Hyper-V PCI/MSI irqchip, so that a pending interrupt is resent on its
new target CPU via the parent x86 vector domain.
Fixes: 4daace0d8ce85 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Cc: stable@vger.kernel.org
Suggested-by: Long Li <longli@microsoft.com>
Suggested-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25a642b6abc98bbbabbf2baef9fc498bbea6aee6 ]
Drop the explicit KVM_SEV_LAUNCH_UPDATE_VMSA call when creating an SEV-ES
VM in the SEV migration test, as sev_vm_create() automatically updates the
VMSA pages for SEV-ES guests. The only reason the duplicate call doesn't
cause visible problems is because the test doesn't actually try to run the
vCPUs. That will change when KVM adds a check to prevent userspace from
re-launching a VMSA (which corrupts the VMSA page due to KVM writing
encrypted private memory).
Fixes: 69f8e15ab61f ("KVM: selftests: Use the SEV library APIs in the intra-host migration test")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260310234829.2608037-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dc01dfb37b34beeefcfe1c3055364d41a4070c7e ]
Starting with LLVM 22, `clang_getTypeDeclaration()` may return a forward
declaration instead of the type definition. This made `bindgen` generate
opaque types [1][2], which in turn made us fail with e.g.
error[E0609]: no field `__bindgen_anon_1` on type `bindings::kernel_param`
--> rust/kernel/module_param.rs:78:46
|
78 | let container = unsafe { &*((*param).__bindgen_anon_1.arg.cast::<SetOnce<T>>()) };
| ^^^^^^^^^^^^^^^^ unknown field
|
= note: available field is: `_address`
This was fixed in `bindgen` 0.72.1 [3].
In order to clarify what is going on and avoid confusion [4][5], add
a warning to `rust_is_available.sh` about it when the versions match,
similar to past warnings like the one removed in:
commit ae64324ad5c1 ("rust: rust_is_available: remove warning for `bindgen` < 0.69.5 && libclang >= 19.1")
In addition, even if the versions match, check if the issue appears to
not reproduce with the given binaries, to avoid a warning in such a case.
Finally, include tests.
[ Nathan, in parallel, updated the instructions of the LLVM+Rust
kernel.org toolchains [6] so that `--version` is not passed to
`cargo` for `bindgen`, and thus the latest `bindgen` is installed
by default, which should help to avoid some of these situations.
Thanks!
- Miguel ]
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust-bindgen/issues/3264 [1]
Link: https://github.com/Rust-for-Linux/linux/issues/353 [2] # "Missing fields in nested class with LLVM 22."
Link: https://github.com/rust-lang/rust-bindgen/pull/3278 [3]
Reported-by: Burak Emir <burak.emir@gmail.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1247 [4]
Link: https://lore.kernel.org/rust-for-linux/CABwQupNfMAJOGqRM9ke6tj4f53dCCsBDKU7Vp+zf8mwk7bqt8Q@mail.gmail.com/ [5]
Link: https://mirrors.edge.kernel.org/pub/tools/llvm/rust/ [6]
Tested-by: Burak Emir <burak.emir@gmail.com>
Link: https://patch.msgid.link/20260719120514.159914-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 409f45387c937145adeeeebc6d6032c2ec232b35 ]
Fix issues with enabling SNP host support and effectively SNP support
which is broken with respect to the KVM module being built-in.
SNP host support is enabled in snp_rmptable_init() which is invoked as
device_initcall(). SNP check on IOMMU is done during IOMMU PCI init
(IOMMU_PCI_INIT stage). And for that reason snp_rmptable_init() is
currently invoked via device_initcall() and cannot be invoked via
subsys_initcall() as core IOMMU subsystem gets initialized via
subsys_initcall().
Now, if kvm_amd module is built-in, it gets initialized before SNP host
support is enabled in snp_rmptable_init() :
[ 10.131811] kvm_amd: TSC scaling supported
[ 10.136384] kvm_amd: Nested Virtualization enabled
[ 10.141734] kvm_amd: Nested Paging enabled
[ 10.146304] kvm_amd: LBR virtualization supported
[ 10.151557] kvm_amd: SEV enabled (ASIDs 100 - 509)
[ 10.156905] kvm_amd: SEV-ES enabled (ASIDs 1 - 99)
[ 10.162256] kvm_amd: SEV-SNP enabled (ASIDs 1 - 99)
[ 10.171508] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 10.177052] kvm_amd: Virtual GIF supported
...
...
[ 10.201648] kvm_amd: in svm_enable_virtualization_cpu
And then svm_x86_ops->enable_virtualization_cpu()
(svm_enable_virtualization_cpu) programs MSR_VM_HSAVE_PA as following:
wrmsrl(MSR_VM_HSAVE_PA, sd->save_area_pa);
So VM_HSAVE_PA is non-zero before SNP support is enabled on all CPUs.
snp_rmptable_init() gets invoked after svm_enable_virtualization_cpu()
as following :
...
[ 11.256138] kvm_amd: in svm_enable_virtualization_cpu
...
[ 11.264918] SEV-SNP: in snp_rmptable_init
This triggers a #GP exception in snp_rmptable_init() when snp_enable()
is invoked to set SNP_EN in SYSCFG MSR:
[ 11.294289] unchecked MSR access error: WRMSR to 0xc0010010 (tried to write 0x0000000003fc0000) at rIP: 0xffffffffaf5d5c28 (native_write_msr+0x8/0x30)
...
[ 11.294404] Call Trace:
[ 11.294482] <IRQ>
[ 11.294513] ? show_stack_regs+0x26/0x30
[ 11.294522] ? ex_handler_msr+0x10f/0x180
[ 11.294529] ? search_extable+0x2b/0x40
[ 11.294538] ? fixup_exception+0x2dd/0x340
[ 11.294542] ? exc_general_protection+0x14f/0x440
[ 11.294550] ? asm_exc_general_protection+0x2b/0x30
[ 11.294557] ? __pfx_snp_enable+0x10/0x10
[ 11.294567] ? native_write_msr+0x8/0x30
[ 11.294570] ? __snp_enable+0x5d/0x70
[ 11.294575] snp_enable+0x19/0x20
[ 11.294578] __flush_smp_call_function_queue+0x9c/0x3a0
[ 11.294586] generic_smp_call_function_single_interrupt+0x17/0x20
[ 11.294589] __sysvec_call_function+0x20/0x90
[ 11.294596] sysvec_call_function+0x80/0xb0
[ 11.294601] </IRQ>
[ 11.294603] <TASK>
[ 11.294605] asm_sysvec_call_function+0x1f/0x30
...
[ 11.294631] arch_cpu_idle+0xd/0x20
[ 11.294633] default_idle_call+0x34/0xd0
[ 11.294636] do_idle+0x1f1/0x230
[ 11.294643] ? complete+0x71/0x80
[ 11.294649] cpu_startup_entry+0x30/0x40
[ 11.294652] start_secondary+0x12d/0x160
[ 11.294655] common_startup_64+0x13e/0x141
[ 11.294662] </TASK>
This #GP exception is getting triggered due to the following errata for
AMD family 19h Models 10h-1Fh Processors:
Processor may generate spurious #GP(0) Exception on WRMSR instruction:
Description:
The Processor will generate a spurious #GP(0) Exception on a WRMSR
instruction if the following conditions are all met:
- the target of the WRMSR is a SYSCFG register.
- the write changes the value of SYSCFG.SNPEn from 0 to 1.
- One of the threads that share the physical core has a non-zero
value in the VM_HSAVE_PA MSR.
The document being referred to above:
https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/revision-guides/57095-PUB_1_01.pdf
To summarize, with kvm_amd module being built-in, KVM/SVM initialization
happens before host SNP is enabled and this SVM initialization
sets VM_HSAVE_PA to non-zero, which then triggers a #GP when
SYSCFG.SNPEn is being set and this will subsequently cause
SNP_INIT(_EX) to fail with INVALID_CONFIG error as SYSCFG[SnpEn] is not
set on all CPUs.
Essentially SNP host enabling code should be invoked before KVM
initialization, which is currently not the case when KVM is built-in.
Add fix to call snp_rmptable_init() early from iommu_snp_enable()
directly and not invoked via device_initcall() which enables SNP host
support before KVM initialization with kvm_amd module built-in.
Add additional handling for `iommu=off` or `amd_iommu=off` options.
Note that IOMMUs need to be enabled for SNP initialization, therefore,
if host SNP support is enabled but late IOMMU initialization fails
then that will cause PSP driver's SNP_INIT to fail as IOMMU SNP sanity
checks in SNP firmware will fail with invalid configuration error as
below:
[ 9.723114] ccp 0000:23:00.1: sev enabled
[ 9.727602] ccp 0000:23:00.1: psp enabled
[ 9.732527] ccp 0000:a2:00.1: enabling device (0000 -> 0002)
[ 9.739098] ccp 0000:a2:00.1: no command queues available
[ 9.745167] ccp 0000:a2:00.1: psp enabled
[ 9.805337] ccp 0000:23:00.1: SEV-SNP: failed to INIT rc -5, error 0x3
[ 9.866426] ccp 0000:23:00.1: SEV API:1.53 build:5
Fixes: c3b86e61b756 ("x86/cpufeatures: Enable/unmask SEV-SNP CPU feature")
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Message-ID: <138b520fb83964782303b43ade4369cd181fdd9c.1739226950.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sean: handcode/port the sev.c changes]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5bb494d5cbb9a3403ba8b1c8bc145b42fc119078 ]
The return value of amd_iommu_detect is not used, so remove it and
is consistent with other iommu detect functions.
Signed-off-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250103165808.80939-1-gaoshiyuan@baidu.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a5f63637890f03177146efddaba5ec7a1b4d61f ]
trace_buffer subbuf_size is read lockless in ring_buffer_read_page() and
ring_buffer_read_start(), while it can simultaneously be resized with
ring_buffer_subbuf_order_set().
Instead of trace_buffer::subbuf_size, use bpage::order in
ring_buffer_read_start() and ring_buffer_read_page().
In ring_buffer_read_start(), even with resize_disabled, there is still a
possibility of a race with a buffer modification. Hold the trace_buffer
mutex to synchronise with any pending ring buffer order modification.
trace_buffer::subbuf_size is now actually useless, remove it. Also,
create accessors rb_subbuf_capacity() and rb_page_capacity() which
return the actual size available for storing events, while
rb_subbuf_size() returns the actual subbuf page-size.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260813131152.3589632-5-vdonnefort@google.com
Fixes: f9b94daa542a ("ring-buffer: Set new size of the ring buffer sub page")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260805153225.2096152-1-vdonnefort%40google.com # patch 1
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b65d5182ecd6b7a24a83d980a0d06e809ef876c5 upstream.
virmidi driver blindly trusts that the given devptr->id value is
within the proper card index range at probe. It's OK for the devices
the driver itself creates at the module probe time, but if the device
is bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806153227.1460166-5-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e0fb960b227fcdebe22e4f26c9486d60943c0424 upstream.
serial-u16550 driver blindly trusts that the given devptr->id value is
within the proper card index range at probe. It's OK for the devices
the driver itself creates at the module probe time, but if the device
is bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806153227.1460166-4-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3690ef20469d5959378260e2752f2314a2572913 upstream.
Although portman2x4 driver has a check of the given devptr->id value,
it doesn't check for a negative id, which is often given as "none" or
such value when bound via sysfs. This may lead to OOB access for
index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806153227.1460166-7-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6c97817e20598e5473094e0e38d1f51f1cf4dfff upstream.
pcxhr_probe() requests pcxhr_threaded_irq() before initializing
mgr->lock, even though the threaded handler takes that mutex.
Initialize the manager locks before request_threaded_irq() so an
early interrupt cannot run against uninitialized mutex state during
probe.
Fixes: 9bef72bdb26e ("ALSA: pcxhr: Use nonatomic PCM ops")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260818144717.2269918-1-runyu.xiao@seu.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d18a260720f86a5f8b5fcfefc4ba2e9dd01c10f8 upstream.
Although mts64 driver has a check of the given devptr->id value, it
doesn't check for a negative id, which is often given as "none" or
such value when bound via sysfs. This may lead to OOB access for
index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806153227.1460166-6-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f7dcecb92ed192ff5fcf842918fb1aaea84b5bdd upstream.
mpu401 driver blindly trusts that the given devptr->id value is within
the proper card index range at probe. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806153227.1460166-3-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 459d3a64766f5ca2f1886daeaf24582831a5f5ab upstream.
bcd2000_free_usb_related_resources() frees both URBs and leaves the
pointers behind:
usb_kill_urb(bcd2k->midi_out_urb);
usb_kill_urb(bcd2k->midi_in_urb);
usb_free_urb(bcd2k->midi_out_urb);
usb_free_urb(bcd2k->midi_in_urb);
The rawmidi device outlives that call. A substream that is still open
when the device is unplugged reaches bcd2000_midi_send() from the
trigger path on close. That function writes to the freed URB and then
hands it to the USB core:
bcd2k->midi_out_urb->transfer_buffer_length = BUFSIZE;
...
ret = usb_submit_urb(bcd2k->midi_out_urb, GFP_ATOMIC);
usb_kill_urb() does not stop a later submission either, so a submit that
races the disconnect can requeue the URB after it has been reaped.
midi_in_urb is exposed the same way: bcd2000_input_complete() resubmits
it from the completion handler.
KASAN on 7.2.0-rc5 (arm64):
BUG: KASAN: slab-use-after-free in bcd2000_midi_send [snd_bcd2000]
Write of size 4 at addr ffff00001827d388 by task bpoc/168
__asan_store4
bcd2000_midi_send [snd_bcd2000]
bcd2000_midi_output_trigger [snd_bcd2000]
snd_rawmidi_kernel_write1
close_substream.part.0
Freed by task 168:
usb_free_urb
bcd2000_disconnect [snd_bcd2000]
BUG: KASAN: slab-use-after-free in usb_submit_urb
Read of size 8 at addr ffff00001827d3b8 by task bpoc/168
Clear both pointers after freeing and test them on the paths that can
still run. Poison the URBs before freeing them: usb_poison_urb() waits
for a running completion handler and rejects any later submission, so
after it returns the input path is quiesced and only the rawmidi trigger
path can still reach bcd2000_midi_send(). No unpoison is needed; the
URBs are freed on the next line.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: b47a22290d58 ("ALSA: MIDI driver for Behringer BCD2000 USB device")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260805013428.38204-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 819b106a9fd2ef3fd8abf898b9a8e4524eca8f48 upstream.
aloop driver blindly trusts that the given devptr->id value is within
the proper card index range at probe. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range.
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806153227.1460166-2-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a478893b59e36cfe7d77a76b352f2db55502e879 upstream.
usb6fire_comm_receiver_handler() forwards a MIDI event using a length
byte the device supplies, with no bound and no check that the transfer
delivered that many bytes:
if (!urb->status) {
if (rt->receiver_buffer[0] == 0x10) /* midi in event */
if (midi_rt)
midi_rt->in_received(midi_rt,
rt->receiver_buffer + 2,
rt->receiver_buffer[1]);
}
receiver_buffer is a 64-byte kzalloc() buffer (COMM_RECEIVER_BUFSIZE), so
only 62 bytes follow the two-byte header. receiver_buffer[1] is a u8 the
device chooses, so a device that answers with 0x10 and a length of 0xFF
makes snd_rawmidi_receive() read 255 bytes starting two bytes into a
64-byte object. The bytes past the buffer are handed to userspace
through the rawmidi read path.
urb->actual_length is not consulted either, so a short transfer leaves
both the type byte and the length byte at their previous values and the
handler acts on stale data.
The receiver URB is submitted from usb6fire_comm_init() at probe, so the
read happens on plug with no user action; forwarding to userspace also
needs a MIDI input substream open, since usb6fire_midi_in_received()
only calls snd_rawmidi_receive() when rt->in is set.
KASAN on 7.2.0-rc5 (arm64), single packet from an emulated device:
BUG: KASAN: slab-out-of-bounds in snd_rawmidi_receive
Read of size 255 at addr ffff000009f64682 by task bash/183
__asan_memcpy
snd_rawmidi_receive
usb6fire_midi_in_received [snd_usb_6fire]
usb6fire_comm_receiver_handler [snd_usb_6fire]
Allocated by task 11:
usb6fire_comm_init [snd_usb_6fire]
usb6fire_chip_probe [snd_usb_6fire]
The buggy address is located 2 bytes inside of
allocated 64-byte region [ffff000009f64680, ffff000009f646c0)
Reject the event when the length exceeds the bytes that follow the
header, and require the transfer to have delivered the header plus that
many bytes. The receiver URB is submitted with a 64-byte
transfer_buffer_length, so a genuine device cannot deliver an event
longer than those 62 bytes and nothing valid is dropped.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: c6d43ba816d1 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260805013423.38175-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 83feedd9d83c0c5199f98c72df0a6196b4aefb4d upstream.
The memory allocated for struct sm501_devdata in sm501_pci_probe() and
sm501_plat_probe() is not freed by the corresponding remove functions
sm501_pci_remove() and sm501_plat_remove(). Fix that by adding a call to
kfree().
Fixes: b6d6454fdb66 ("[PATCH] mfd: SM501 core driver")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20260720113836.73133-1-nihaal@cse.iitm.ac.in
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f967455fb2a5a2079b9eb5823e9ccf359174bf9f upstream.
decap_and_validate() pulls the outer SRv6 headers and makes the inner
packet the skb network header. The IPv6 control block still contains
values collected while parsing the outer packet, including nhoff and
extension-header flags.
End.DX6 and End.DT6 route the inner IPv6 packet directly to the IPv6
input path. An unprivileged user can reach End.DT6 from a user and net
namespace by installing a local SID and injecting an outer packet with
Hop-by-Hop and Destination Options headers followed by an SRH and a
minimal inner IPv6 packet.
The outer extension headers leave a large nhoff in IP6CB. After
decapsulation, ip6_protocol_deliver_rcu() uses that stale offset on the
inner packet and reads beyond the skb head. KASAN reports:
BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu
ip6_protocol_deliver_rcu+0x1118/0x1450
ip6_input_finish+0x11b/0x240
seg6_local_input_core+0xed/0x2e0
lwtunnel_input+0x1e9/0x4e0
ipv6_rthdr_rcv+0x525f/0x6c50
ip6_protocol_deliver_rcu+0xcb7/0x1450
Before clearing IP6CB for an inner IPv6 packet, save its incoming
interface index and L3 slave state. Restore both after the clear and set
nhoff to the inner IPv6 base-header nexthdr field.
Use IP6CB(skb)->iif rather than skb->skb_iif because VRF processing can
replace skb_iif with the L3 master while IP6CB keeps the receiving
interface. Preserve IP6SKB_L3SLAVE for the same reason.
Fixes: d7a669dd2f8b ("ipv6: sr: add helper functions for seg6local")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f66bdb1cc0fcd227a062378f8be0b5873aa5600a upstream.
skb_tx_error() completes the zerocopy uarg and clears
SKBFL_ALL_ZEROCOPY, and skb_zcopy_downgrade_managed() clears
SKBFL_MANAGED_FRAG_REFS. Both live in skb_shinfo(), which every clone
shares, while the caller only owns the reference it is about to drop.
Through a clone it tells the producer its pages are free and drops
SKBFL_SHARED_FRAG for an skb that is still in flight.
Open vSwitch reaches this with a non-last OVS_ACTION_ATTR_RECIRC:
clone_execute() sends a skb_clone() into ovs_dp_process_packet() while
do_execute_actions() keeps forwarding the original, and skb_clone()
does not privatise the frags here -- skb_orphan_frags() returns early
on SKBFL_DONT_ORPHAN. A flow miss on the clone then strips the marker
from the packet still being forwarded, and a later local ESP delivery
decrypts in place over frags it does not own privately.
Skip it for a cloned skb. Nothing is lost: skb_release_data() clears
the zerocopy state once the last reference to the shared data goes.
Fixes: 25121173f7b1 ("skb: api to report errors for zero copy skbs")
Cc: stable@vger.kernel.org
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Tested-by: Jongmin Jang <payload.jang@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/CFAB292A-674B-4C14-BB2C-BB8830AD5659@doyensec.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 82aeed2400786bd3f79d88cb8b8f42e6127e5923 upstream.
While debugging another issue today, I found out that my TX queue is
reported as stopped for 4294907392 ms (49.7 days), on a machine that
had been up for four minutes.
bnxt_en 0002:01:00.0 eth0: NETDEV WATCHDOG: CPU: 28: transmit queue 23 timed out 4294907392 ms
4294907392 is not an elapsed time. It is the value of jiffies at that
moment: INITIAL_JIFFIES is 4294667296, which leaves jiffies 59 seconds
short of wrapping.
dev_activate() runs transition_one_qdisc() over every TX queue, which
resets trans_start to 0, and then stamps only queue 0 through
netif_trans_update().
Stamp jiffies instead. A queue stopped across dev_activate() now gets a
full watchdog_timeo of grace, and is still reported if it is stopped
that long.
Fixes: 9b36627acecd ("net: remove dev->trans_start")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20260825-trans_start-v2-1-286b4d6d70cb@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b222adeb9340306e2ff97127c76117abb9b3df8 upstream.
IP tunnel devices derive their advertised needed_headroom from lower
output devices. A stack of user-created devices can make the derived
value larger than the 16-bit skb header offsets can represent. Once IP
output reserves it, skb head expansion can wrap those offsets.
The runtime transmit path already caps a growing needed_headroom at 512.
Apply the same cap when tunnel configuration publishes needed_headroom
derived from a lower output device.
Capping the advertised value is safe: IP tunnel transmit still expands
the skb when a packet needs more headroom. A nonsensical stacked
configuration can therefore incur an extra reallocation, but it cannot
publish an unbounded reservation to upper layers.
Fixes: 1a37e412a022 ("net: Use 16bits for *_headers fields of struct skbuff")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/ba04a1fd6bfae2377607fad5d8f80f7eb80fd4c4.1786542637.git.zhilinz@nebusec.ai
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
