| Age | Commit message (Collapse) | Author |
|---|
|
io_uring_cmd_issue_blocking() is only called from blk_cmd_complete(),
which is already a task work callback. However, it queues another task
work item, to call io_queue_iowq(). Just call io_queue_iowq() directly
to skip the CPU cost and latency of the redundant task work proxying.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://patch.msgid.link/20260702184847.1709378-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
import_zcrx() attaches an existing ifq to another ring. It never calls
zcrx_set_ring_ctx() and so never takes the ->master_ctx reference, but
its error path still passes @ctx to zcrx_unregister(), which clears
->master_ctx and drops its percpu_ref whenever ifq->master_ctx == ctx.
That condition is reachable. A ring that registers an ifq with a
non-zero event type_mask gets ->master_ctx pointed at itself, and
nothing stops it from exporting that ifq with ZCRX_CTRL_EXPORT and
importing the resulting fd back into the same ring. Failing the import
after the refcount bumps -- an argument page mapped PROT_READ makes the
copy_to_user() in import_zcrx() return -EFAULT -- then clears the
->master_ctx owned by the original registration, which is still live.
Refcounts stay balanced and nothing is freed early, so there is no
splat. The ring silently stops receiving ZCRX_EVENT_ALLOC_FAIL and
ZCRX_EVENT_COPY: zcrx_send_notif() returns early on a NULL
->master_ctx, and ->master_ctx is only ever set on a freshly allocated
ifq, so it cannot be restored without tearing the ring down.
Pass NULL instead, matching zcrx_box_release() and the zcrx_export()
error path. io_register_zcrx() only gets away with passing @ctx
because zcrx_set_ring_ctx() runs after its last goto err.
Fixes: 00d91481279f ("io_uring/zcrx: share an ifq between rings")
Signed-off-by: Woraphat Khiaodaeng <worapat.kd2@gmail.com>
Link: https://patch.msgid.link/20260730162741.1125-1-worapat.kd2@gmail.com
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: add pavel edit]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ipc_config_data buffer for copier widgets is built once during
ipc_prepare (called from sof_pcm_setup_connected_widgets) and cached
for reuse. For host copiers this buffer contains the copier_data with
gtw_cfg.node_id (host DMA ID). For DAI copiers it additionally includes
a dma_config_tlv trailer with stream_id and dma_channel_id for HDA link
DMA.
On suspend/resume, both host and link DMA streams are released and
re-allocated with potentially different stream tags. The underlying
copier_data and dma_config_tlv structures are correctly updated by
host_config and sdw_hda_dai_hw_params respectively. However, since the
widget list (spcm->stream[].list) persists across suspend,
sof_pcm_hw_params skips sof_pcm_setup_connected_widgets and ipc_prepare
never runs again to rebuild ipc_config_data. The stale cached payload
is then sent to firmware with boot-time DMA channel assignments, causing
DMA channel conflicts that lead to firmware errors and crashes.
Fix this by refreshing copier_data and dma_config_tlv portions of
ipc_config_data in sof_ipc4_widget_setup right before the IPC message
is sent. This ensures the payload always reflects the current DMA state
regardless of whether ipc_prepare ran.
For DAI copiers, the gtw_cfg.config_length in copier_data is temporarily
inflated to include the TLV size (matching the ipc_config_data layout)
before copying, then restored, mirroring what
sof_ipc4_prepare_copier_module does when first building the buffer.
Fixes: e9c6b118de1a ("ASoC: SOF: make dma_config_tlv be an array")
Cc: stable@vger.kernel.org
Link: https://github.com/thesofproject/sof/issues/10700
Link: https://github.com/thesofproject/sof/issues/10955
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20260730054822.5913-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix issues related to cpufreq, in the ACPI CPPC library and the
generic CPPC cpufreq driver, in the powernow-k8 and amd-pstate
drivers, and in the schedutil governor:
- Allow fast frequency switching in the ACPI CPPC library only when
every supported control used by the driver callback has an address
space already accepted for fast access (Christian Loehle)
- Skip writes to unsupported performance controls in the ACPI CPPC
library (Christian Loehle)
- Update cppc_cpufreq_update_perf_limits() to read policy->min and
policy->max once and, if the lockless snapshot is inconsistent,
reduce the minimum to the observed maximum, along the lines of
cpufreq_driver_resolve_freq() (Christian Loehle)
- Fix a possible memory leak in the powernowk8_cpu_init() error paths
(Abdun Nihaal)
- Loosen the requirement on lowest nonlinear frequency != min freq in
the amd-pstate driver that is too tight for new systems some of
which actually have the lowest nonlinear frequency identical to the
minimum frequency (Mario Limonciello)
- Prevent amd-pstate from loading on unsupported hardware (Rong
Zhang)
- Address an initialization race in the schedutil governor when it
runs on multi-CPU cpufreq policies, by making it initialize all
per-CPU structures first and only then publish the per-CPU
utilization update hooks (Zhongqiu Han)"
* tag 'pm-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: powernow-k8: Fix possible memory leak in powernowk8_cpu_init()
ACPI: CPPC: Skip writes to unsupported performance controls
cpufreq/amd-pstate: Prevent the driver from loading on unsupported hardware
cpufreq/amd-pstate: Loosen requirement on lowest nonlinear frequency != min freq
cpufreq: schedutil: Publish util hooks only after all sg_cpu are initialized
cpufreq: cppc: Sanitize lockless policy limit snapshots
ACPI: CPPC: Check all controls for fast switching
|
|
Esteban Urrutia <esteuwu@proton.me> says:
Add the required bindings and driver support for supporting the sound
card found in the SM8475 SoC.
Link: https://patch.msgid.link/20260729-sm8475-asoc-v1-0-3edad8aa7628@proton.me
|
|
With this, SM8475 topologies can have their own firmware folder.
Signed-off-by: Esteban Urrutia <esteuwu@proton.me>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729-sm8475-asoc-v1-2-3edad8aa7628@proton.me
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add compatible string for the sound card found in the SM8475 SoC.
Signed-off-by: Esteban Urrutia <esteuwu@proton.me>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729-sm8475-asoc-v1-1-3edad8aa7628@proton.me
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace of_get_property with of_property_read_u32 for the
"clock-frequency" property, which is the modern typed DT accessor
that returns an error code directly and avoids the raw const unsigned
int * pointer dance.
Also drop the dev_err_probe wrapper on devm_request_irq failure,
returning ret directly since the core already logs probe errors.
Get rid of irqnum in the private struct. It's only used in _probe. Was
used in _remove before devm to free the irq.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260728202932.16207-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Starfire is a derivative of Panther Lake SoC and shares a similar memory
subsystem architecture. Add Starfire compute die ID and reuse Panther
Lake's configuration data for EDAC support.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Jie Wang <jie.wang@intel.com>
Link: https://patch.msgid.link/20260730025454.4099934-1-qiuxu.zhuo@intel.com
|
|
The igen6 EDAC driver implements similar interleave and hash translation
logic at multiple levels of the memory hierarchy.
The separate implementations duplicate decoding logic, making future
changes harder and increasing the risk of behavior diverging.
Consolidate the common address translation operations into shared
helpers so all decoding paths use a single implementation.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-11-qiuxu.zhuo@intel.com
|
|
Several resource configuration tables differ only in their num_imc
value, while all other fields are identical. Their only purpose is to
describe the number of memory controllers supported by a platform.
Since IMC count is now detected at runtime, these duplicate tables no
longer carry any unique platform information. Reuse the shared
configurations and remove the redundant tables.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-10-qiuxu.zhuo@intel.com
|
|
The igen6_edac currently relies on res_config::num_imc to describe the
number of memory controllers supported by each SoC. As a result, adding
support for a new platform requires updating this configuration even
though the hardware can be discovered at runtime.
Instead, detect the number of present memory controllers at runtime and
size the driver state accordingly. This eliminates the need to update
res_config whenever a new SoC variant is added.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-9-qiuxu.zhuo@intel.com
|
|
The existing comments repeat information already implied by the code
structure. Shorten them to SoC names only to reduce clutter and
improve readability.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-8-qiuxu.zhuo@intel.com
|
|
When reconstructing the removed interleave bit from an inflated memory
slice address, where a zero was inserted at the interleave bit position,
it's unnecessary to XOR this zero-valued interleave bit.
Remove this unnecessary XOR operation. No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-7-qiuxu.zhuo@intel.com
|
|
Raptor Lake-P was treated as using a different IBECC (In-Band ECC) error
address format and therefore had a dedicated extraction path that shifted
the logged address.
However, Raptor Lake-P uses the same cache-line-granularity error address
format as other IBECC platforms. The special handling causes the logged
address to be decoded incorrectly.
Fix the issue by removing Raptor Lake-P specific extraction logic and using
the common path instead. This also allows reusing Alder Lake resource
configuration data.
Fixes: d23627a7688f ("EDAC/igen6: Add Intel Raptor Lake-P SoCs support")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-6-qiuxu.zhuo@intel.com
|
|
In non-hash mode, decode_channel_addr() and channel index extraction
used a hardcoded interleave bit position 6 instead of the actual
intlv_bit parameter, causing incorrect channel address decoding.
Fix this by using intlv_bit consistently in both hash and non-hash modes.
Fixes: 10590a9d4f23 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-5-qiuxu.zhuo@intel.com
|
|
In channel selection hash mode, the hardware decoding logic always
includes the channel interleave bit in XOR operations. However, the
hash mask may or may not include this channel interleave bit. When
the mask does include this bit, the current igen6_edac code performs
XOR on the interleave bit twice, effectively ignoring it - which is
incorrect.
Fix this issue by ensuring the hash mask always includes the interleave
bit, so XOR is performed on the interleave bit exactly once.
Fixes: 10590a9d4f23 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-4-qiuxu.zhuo@intel.com
|
|
The address translation logic splits the memory space into interleaved
and non-interleaved regions using a boundary at 2 * s_size.
The current check uses '>' and incorrectly classifies the boundary
address (2 * s_size) as part of the interleaved region. This leads to
incorrect channel/sub-channel selection at the region boundary.
Fix the classification by using '>=' so that the boundary address is
handled in the non-interleaved region, matching the hardware layout.
Fixes: 10590a9d4f23 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-3-qiuxu.zhuo@intel.com
|
|
The current method to get DIMM width relied on DEV_* enum ordering via a
linear offset (+ DEV_X8), tightly coupling hardware encoding to enum layout.
Replace it with explicit decoding to remove this dependency, as the
enum is expected to grow with additional device widths.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260730024238.4096623-2-qiuxu.zhuo@intel.com
|
|
Currently, if regcache_sync() fails after the enable GPIO has been
asserted, the driver returns with enable_gpio still set high and
regcache_cache_only() left disabled. This leaves the device state
inconsistent with the disabled state, where the enable GPIO is low and
cache_only is enabled.
On failure, restore the original state by setting cache_only back to
true and driving the enable GPIO low before returning the error.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260729100018.66577-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The comments for call_rcu_tasks() and call_rcu_tasks_rude() referred
to "RCU read-side critical sections", which is ambiguous. specify
"rcu-tasks" and "rcu-tasks rude" respectively to match the actual
flavor being described.
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This 'commit 1612160b9127 ("rcu-tasks: Eliminate deadlocks involving
do_exit() and RCU tasks")' has reimplemented the rcu_tasks_postscan(),
and the synchronize_srcu() has been removed, this commit therefore
rename tasks_rcu_exit_srcu_stall_timer to tasks_rcu_exit_stall_timer.
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rdp->cpu_no_qs.s field is accessed only by the current CPU,
but can be accessed both at task level and from interrupt handlers.
All accesses from interrupts-enabled code must therefore be marked.
This commit therefore converts from __this_cpu_read() to this_cpu_read(),
but only in interrupts-enabled code, that is, the rcu_qs() function.
KCSAN located this issue.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When CONFIG_KASAN=y and CONFIG_KASAN_STACK=y builds, the
show_rcu_gp_kthreads() exceeds the 1024-byte frame-size limit:
make kernel/rcu/tree.o KCFLAGS="-fstack-usage"
DESCEND objtool
DESCEND bpf/resolve_btfids
INSTALL libsubcmd_headers
CC kernel/rcu/tree.o
In file included from kernel/rcu/tree.c:4998:
kernel/rcu/tree_stall.h: In function 'show_rcu_gp_kthreads':
kernel/rcu/tree_stall.h:994:1: warning: the frame size of 1656 bytes is larger than 1024 bytes [-Wframe-larger-than=]
grep show_rcu kernel/rcu/tree.su
tree_nocb.h:1622:13:show_rcu_nocb_state 896 dynamic,bounded
tree_stall.h:933:6:show_rcu_gp_kthreads 1784 dynamic,bounded
tree_stall.h:1102:13:sysrq_show_rcu 16 static
Wrap the pr_info() into two noinline_for_stack helpers function:
show_rcu_state() print rcu_state status, and show_rcu_node()
print single rcu_node status.
After apply this change:
grep show_rcu kernel/rcu/tree.su
tree_stall.h:955:22:show_rcu_node 696 dynamic,bounded
tree_stall.h:930:22:show_rcu_state 872 dynamic,bounded
tree_nocb.h:1622:13:show_rcu_nocb_state 896 dynamic,bounded
tree_stall.h:972:6:show_rcu_gp_kthreads 544 static
tree_stall.h:1113:13:sysrq_show_rcu 16 static
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
rcu_all_qs() and rcu_note_context_switch() read/clear the per-CPU
->rcu_urgent_qs and ->rcu_need_heavy_qs flags with plain raw_cpu_read()
and this_cpu_write(), while the RCU core clears them with WRITE_ONCE() in
rcu_disable_urgency_upon_qs(). KCSAN flags the resulting same-CPU race:
BUG: KCSAN: data-race in rcu_all_qs / rcu_disable_urgency_upon_qs
It is benign -- the flags are advisory and rcu_all_qs() re-reads
->rcu_urgent_qs with smp_load_acquire() before acting on it -- but these
are the last unmarked accesses to the two flags; every other access
already uses READ_ONCE()/WRITE_ONCE()/smp_*. Mark them to match. No
functional change.
Reproduced on a PREEMPT_NONE, CONFIG_KCSAN_INTERRUPT_WATCHER=y kernel with
a pthreads program whose threads (two per CPU) loop reading a large file:
for (;;) {
int fd = open("/proc/kallsyms", O_RDONLY);
while (read(fd, buf, sizeof(buf)) > 0)
;
close(fd);
}
The read()s drive cond_resched() -> rcu_all_qs() while the busy CPUs keep
the grace period urgent, so the RCU core clears the flags concurrently.
Fixes: 2dba13f0b6c2 ("rcu: Switch urgent quiescent-state requests to rcu_data structure")
Signed-off-by: Itai Handler <itai.handler@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcu_check_gp_start_stall() works entirely on rnp parameter,
and never uses it's rdp parameter. this commit therefore drop it,
updating both callers and the declaration.
No functional change.
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rdp->cpu_no_qs.b.norm field is accessed only by the current CPU,
but can be accessed both at task level and from interrupt handlers.
All accesses from interrupts-enabled code must therefore be marked.
This commit therefore converts from __this_cpu_read() to this_cpu_read(),
from __this_cpu_write() to this_cpu_write(), and plain C-language accesses
to READ_ONCE() and WRITE_ONCE(), but only in interrupts-enabled code.
KCSAN located this issue.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The called functions already log failures where appropriate. Remove the
error log here to avoid duplicate error messages.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://patch.msgid.link/20260729073532.56468-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The called functions already log failures where appropriate. Return the
original error directly and avoid duplicate error messages.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://patch.msgid.link/20260729073532.56468-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Extend the RPPX1 driver to allow setting the gamma sensor linearization
configuration parameters. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Extend the RPPX1 driver to allow setting the gamma out correction
configuration parameters. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Extend the RPPX1 driver to allow setting the lens shade correction
configuration parameters. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Extend the RPPX1 driver to allow setting the color correction matrix
configuration parameters. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Extend the RPPX1 driver to allow setting the black level measurement
and gain configuration. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Extend the RPPX1 driver to allow setting the histogram measurement
configuration and consuming the resulting statistics. It uses the RPPX1
framework for parameters and its writer abstraction to allow the user to
control how, and when, configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Extend the RPPX1 driver to allow setting the exposure measurement
configuration and consuming the resulting statistics. It uses the RPPX1
framework for parameters and its writer abstraction to allow the user to
control how, and when, configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Extend the RPPX1 driver to allow setting the white balance gain
configuration parameters. It uses the RPPX1 framework for parameters and
its writer abstraction to allow the user to control how, and when,
configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Extend the RPPX1 driver to allow setting the white balance measurement
configuration and consuming the resulting statistics. It uses the RPPX1
framework for parameters and its writer abstraction to allow the user to
control how, and when, configuration is applied to the RPPX1.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The Renesas R-Car ISP block consists of two different IP blocks, one
CSI-2 Channel Selector (CSISP) and one traditional ISP for image
operation (ISPCORE). The R-Car ISP driver currently supports the CSISP
functionality as part of the video capture pipeline, this change adds
support for the ISPCORE functionality.
The ISPCORE functionality is further split in two parts, a Renesas
specific part and a Dream Chip Real-time Pixel Processor IP part
(RPPX1). The Renesas part deals with I/O to/from the block while the
RPPX1 part deals with the actual ISP functions.
The RPPX1 functionality is implemented in a support framework (DCT
RPPX1) as this block can be used by different vendors or setups. This
change deals with the Renesas part of exposing the V4L2 elements needed
for a user-space interface to the RPPX1 and deals with the DMA to/from
the RPP block. It also facilitates the user-space V4L2 API to allow
configuring the RPPX1 using the DCT RPPX1 support framework.
The functionality exposed are one input video device where RAW bayer
frames can be queued for processing, one output video device where the
debayerd image can be read as either ABGR32 or NV16M format. Further
more a video device to queue the image processing parameters to
configure the RPPX1 IPS as well as a video device to read statistics
about the processed image is available.
There is no change in the operation of the CSISP functionality.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[ VSPX interfacing + locking sanitizing ]
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Add a framework driver for Dreamchip RPPX1 ISP. The driver aims to
provide a framework for other V4L2 based drivers to drive the RPPX1
functionality. The reason for this split is that the RPPX1 IP itself do
not provide any DMA engines to drive data to/from the device, instead it
depends on other IP blocks to implement these features.
While the peripherals around the RPPX1 ISP used in different designs and
by different vendors are different the RPPX1 core itself is the same.
For this reason the framework solution to be able to split the Dreamchip
RPPX1 driver from vendors usage of it have been picked in hope to reduce
duplication of the common parts.
The design is to try and keep the surface of this framework as small as
possible. The intention of this change is to be able to fill all needs
of this.
* Two functions to create and destroy a RPPX1 instance, rppx1_create()
and rppx1_destory(). These are intended to be called in the users
probe and remove code paths.
* Two functions to start and stop the RPPX1 processing, rppx1_start()
and rppx1_stop(). These are intended to be called in the users
stream on and stream off code paths.
* One function to ask the RPPX1 to process parameters buffer prepared
by user space, rppx1_params(). The intention is to call this
function when the parameter buffer is queued to the V4L2 driver and
the result stored by the driver until the time it needs to be
written to the RPPX1. It's the users responsibility to write it
either using MMIO or other means.
* One function to fill in a statistic buffer based on the current
status of the RPPX1, rppx1_stats_fill_isr(). The intention is that
the user call's this in its interrupt handler when it knows the
RPPX1 is done processing a frame.
* One function to ack and retrieve the interrupts generated by the
RPPX1, rppx1_interrupt(). The intention is to call this function
when the users interrupt handler detects the RPPX1 have raised and
interrupt. There is no need for the user to understand, or act, on
the actual RPPX1 interrupt, but it can if it wants too.
The initial support in the framework is limited and do not implement any
ISP processing algorithms other then configuring the RPPX1 to process
any Bayer (8-, 10, or 12-bit) image and produce either a RGB or YUYV
output. It do however probe all function blocks of the RPPX1 and provide
an interface to interact with both parameter and statistic bufferers.
The user of the framework will not change as algorithms for the
different function blocks of the ISP are being added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Add the scaffolding for the parameters and statistics buffers for
Dreamchip RPPX1. The parameters for each ISP function block will be
added together with the logic for it.
In addition to the scaffolding add a common struct that describes the
measurement window. This struct is not specific to any block and will
used by many of them.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
[Niklas: Commit message]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Register V4L2 metadata fourcc codes for the Dreamchip RPP-X1 ISP
parameters and statistics buffers. These formats are used by the driver
to exchange ISP configuration and 3A statistics with userspace through
the extensible parameters framework.
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Add two helper functions to v4l2-isp to handle statistics:
- v4l2_isp_stats_init_buffer() to initialize a statistics buffer
- v4l2_isp_stats_init_block() to initialize a statistics block in the
next available memory location of a buffer
The v4l2_isp_stats_init_buffer() resets the data size counter of the
buffer and initializes its 'version' field.
The v4l2_isp_stats_init_block() helper accepts the type of the stats
block about to be populated, an array of per-block-type information and
the maximum size of the v4l2-isp buffer. If enough space for the new
block is available, the function increments the
v4l2_isp_buffer.data_size counter, initializes the new stats block
header and returns a pointer to the block for the driver to populate it.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Use the newly introduced per-block validation in v4l2-isp framework to
implement a validation callback for the AWB and AE configuration blocks
to make sure the configured metering zones do not exceed the hardware
capabilities.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Drivers are expected to provide to the helper function
v4l2_isp_params_validate_buffer() a list of 'struct
v4l2_isp_params_block_type_info' entries, one for each supported ISP block.
The type 'struct v4l2_isp_params_block_type_info' so far only contained the
expected block size for the core framework to validate the declared block
size against the expected one.
For some blocks, drivers might want to implement more precise per-block
validations. Add a function pointer member to 'struct
v4l2_isp_params_block_type_info' to allow drivers to register a callback
and call it from the core framework during validation.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Rename v4l2_isp_params_buffer_size() to v4l2_isp_buffer_size() to
support statistics.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Rework the userspace-api documentation of V4L2 ISP to support
statistics.
Update all occurences of 'v4l2_isp_param' types to match the uAPI
changes and add a section to document the statistics serialization
format.
Signed-off-by: Antoine Bouyer <antoine.bouyer@nxp.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[Update on uAPI changes]
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Extend the v4l2-isp extensible format introduced for isp parameters buffers
to the support buffers of ISP statistic.
Like for ISP configuration purpose, that will help supporting various ISP
hardware versions reporting different statistics data with less impact on
userspace.
Rename all 'v4l2_isp_params' types to generic 'v4l2_isp' types to
prepare to use them for statistics as well and maintain the existing
types for compatibility with existing userspace only.
Signed-off-by: Antoine Bouyer <antoine.bouyer@nxp.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[Rework to remove 'v4l2_isp_stats' and unify types]
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Each int3472_gpio_map entry currently maps exactly one ACPI HID to a
GPIO quirk. As more sensors needing the same quirk are identified, this
means adding a full duplicate table entry per HID, differing only in
the HID string, which does not scale.
Change int3472_gpio_map::hid to a NULL-terminated hids array so a
single entry can match any number of ACPI HIDs, letting new HIDs be
added to the relevant array instead of duplicating quirk entries.
Cc: linux-media@vger.kernel.org
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Tested-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The HM1092 is a mono IR sensor used for face unlock on Intel IPU6 and
IPU7 laptops. Without an entry here the sensor endpoint is built with no
link-frequencies property, the driver rejects every mode and the sensor
never binds.
Two frequencies are listed because the sensor is driven from a different
external clock depending on the platform, with the PLL programmed to
match: 180480000 Hz on Dell (19.2 MHz EXTCLK) and 180000000 Hz on ASUS
(24 MHz).
Assisted-by: Claude:claude-opus-5
Signed-off-by: Jake Steinman <j@metarealtyinc.ca>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
