| Age | Commit message (Collapse) | Author |
|---|
|
llbitmap_cond_end_sync() is called with the sync thread's current sector.
That value is an exclusive progress boundary: sectors below it have
completed, but the llbitmap chunk containing it can still be in progress.
The old code converted that sector directly to the last bit passed to
BitmapActionEndsync. If resync had only advanced part-way into a large
llbitmap chunk, the in-progress chunk was marked synced and flushed before
the rest of the chunk was repaired. A later bitmap-assisted RAID1 resync
could then skip the remainder of that chunk and leave stale mirror data
behind.
This can be reproduced without editing bitmap metadata by creating a large
RAID1 with a lockless bitmap so llbitmap naturally selects a 524288-sector
chunk (with the default 128 KiB bitmap area, an array just over 16 TiB is
enough), making one mirror stale through the normal degraded write/re-add
path, and throttling resync so the daemon checkpoint runs while resync is
still inside the first chunk. On the bad kernel, bit 0 is ended early and a
stale sector later in the same chunk is skipped. With this fix, bit 0
remains Syncing until resync reaches the next chunk boundary.
Round the exclusive progress sector down to the nearest llbitmap chunk
boundary and end only chunks strictly below that boundary. Also honor the
force argument so callers that need an immediate checkpoint are not
suppressed by daemon_sleep.
Tested-by: Mykola Marzhan <mykola@meshstor.io>
Link: https://patch.msgid.link/20260802195038.164272-4-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
llbitmap allocates its in-memory page cache and page-control structures from
paths that can already be holding MD reconfiguration or bitmap state locks.
For example, component_size_store() takes mddev_lock(), update_size() calls
the personality resize method, and llbitmap_resize() can grow the page cache
through llbitmap_prepare_resize().
Using GFP_KERNEL in those paths allows direct reclaim to enter filesystem or
block I/O while MD resize state is locked. That can recurse back into the
same array and wait on state that cannot make progress until the resize path
finishes.
Use GFP_NOIO for the llbitmap object, cached bitmap pages, page controls,
page-control arrays, and percpu_ref initialization. Leave the explicit
metadata zeroout path unchanged because it is intentional bitmap I/O rather
than reclaim-driven allocation.
Tested-by: Mykola Marzhan <mykola@meshstor.io>
Link: https://patch.msgid.link/20260802195038.164272-3-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
llbitmap_flush() sets LLPageFlush on each bitmap page before it queues the
daemon worker. The flag tells md_llbitmap_daemon_fn() to ignore the normal
barrier_idle expiry check and clean the page immediately.
The daemon only tested LLPageFlush. Once a page had been flushed explicitly,
the flag stayed set, so later dirty bits on that page also bypassed
barrier_idle and were cleaned the next time the daemon ran. That can make a
new write look clean much earlier than the configured idle window.
Consume LLPageFlush in md_llbitmap_daemon_fn() with test_and_clear_bit() and
use the returned value for the current expiry check. The explicit flush still
forces the current daemon pass, while later writes on the same page wait for
barrier_idle again.
This can be reproduced through normal sysfs operations:
1. Create a small RAID1 with --bitmap=lockless and --assume-clean.
2. Set llbitmap/daemon_sleep=1 and llbitmap/barrier_idle=10.
3. Toggle md/array_state from active to readonly and back to active to call
llbitmap_flush() without destroying the in-memory bitmap.
4. Write one sector and read llbitmap/bits immediately, after 2 seconds,
and after 12 seconds.
On the bad kernel the dirty bit is already clean after 2 seconds. With this
change it remains dirty until the barrier_idle window expires.
Tested-by: Mykola Marzhan <mykola@meshstor.io>
Link: https://patch.msgid.link/20260802195038.164272-2-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
This gets the port working. Tested with WCN6856 WLAN capabilities.
Serdes, RX and PCS Misc tables had to be added, while TX and PCS tables
were reused from SM8550, and PCS Lane1 was reused from SAR2130P.
Signed-off-by: Esteban Urrutia <esteuwu@proton.me>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260715-sm8475-bup-pcie-v2-3-48bd91a19abf@proton.me
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some SoCs such as SM8475 write data to registers using this offset,
specifically SW_CTRL2 and MX_CTRL2.
Add pcs_lane1 offset to V5 offsets to support this.
Signed-off-by: Esteban Urrutia <esteuwu@proton.me>
Fixes: 0fd0b31965b0 ("phy: qualcomm: qmp-pcie: add support for SAR2130P")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260715-sm8475-bup-pcie-v2-2-48bd91a19abf@proton.me
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
SM8450 init sequence for this PHY varies significantly and can't be reused
in SM8475.
Add bindings for the PHY found in this SoC.
Signed-off-by: Esteban Urrutia <esteuwu@proton.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260715-sm8475-bup-pcie-v2-1-48bd91a19abf@proton.me
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
USB4 routers
Some AMD USB4 host routers have a bug in the Host Interface where
DMA path setup and teardown cycles may cause the Tx ring to hang.
Fix this by issuing a Host Interface Reset on every DMA path teardown
for affected routers. The Host Interface Reset brings the registers in
the memory BAR to their default state and clears the End-to-End Flow
Control state, preventing the hang condition.
Co-developed-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Runtime PM has to be enabled before creating the PHY, since phy_create()
only enables runtime PM on the PHY device if it is already enabled on
this parent device. This opens a small window where the device can be
runtime suspended after pm_runtime_enable() and before the later
pm_runtime_forbid(), causing an unnecessary suspend/resume cycle while
the PHY is not yet registered.
Take a runtime PM usage reference with pm_runtime_get_noresume() before
enabling runtime PM and release it once the PHY has been created to
prevent the device from being runtime suspended during that window.
This also makes the probe path safe independently of pm_runtime_forbid(),
which is a good preparation for potentially dropping the forbid() call in
the future and letting runtime PM be enabled by default.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722-qcom-usb-phy-fix-null-v6-7-534f7e61b9a6@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There is a small window where the runtime suspend callback may run
after pm_runtime_enable() and before pm_runtime_forbid(). In this
case, a crash occurs because runtime suspend/resume dereferences
qmp->phy pointer, which is not yet initialized:
`if (!qmp->phy->init_count) {`
This can also happen if user re-enables runtime-pm via the sysfs
attribute before qmp phy is initialized.
Similarly to other qcom phy drivers, introduce a qmp->phy_initialized
variable that can be used to avoid relying on the possibly uninitialized
phy pointer.
Fixes: e464a3180a43 ("phy: qcom-qmp-usb: split off the legacy USB+dp_com support")
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722-qcom-usb-phy-fix-null-v6-6-534f7e61b9a6@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Runtime PM must be enabled before creating the PHY, since phy_create()
only enables runtime PM on the PHY device if it is already enabled on
this parent device. However, the runtime PM callbacks dereference the
hsphy instance, which is not yet ready, leaving a window where a suspend
callback may trigger a NULL pointer dereference.
Take a runtime PM usage reference with pm_runtime_get_noresume() before
enabling runtime PM and release it once the PHY has been created, so that
no runtime suspend can run before the PHY is ready. This also prevents a
short window where an unnecessary runtime suspend can occur.
Use the devres-managed version to ensure PM runtime is symmetrically
disabled during driver removal for proper cleanup.
Fixes: 0d75f508a9d5 ("phy: qcom-snps: Add runtime suspend and resume handlers")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722-qcom-usb-phy-fix-null-v6-5-534f7e61b9a6@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Runtime PM has to be enabled before creating the PHY, since phy_create()
only enables runtime PM on the PHY device if it is already enabled on
this parent device. This opens a small window where the device can be
runtime suspended after pm_runtime_enable() and before the later
pm_runtime_forbid(), causing an unnecessary suspend/resume cycle while
the PHY is not yet registered.
Take a runtime PM usage reference with pm_runtime_get_noresume() before
enabling runtime PM and release it once the PHY has been created to
prevent the device from being runtime suspended during that window.
This also makes the probe path safe independently of pm_runtime_forbid(),
which is a good preparation for potentially dropping the forbid() call in
the future and letting runtime PM be enabled by default.
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722-qcom-usb-phy-fix-null-v6-4-534f7e61b9a6@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There is a small window where the runtime suspend callback may run
after pm_runtime_enable() and before pm_runtime_forbid(). In this
case, a crash occurs because runtime suspend/resume dereferences
qmp->phy pointer, which is not yet initialized:
`if (!qmp->phy->init_count) {`
This can also happen if user re-enables runtime-pm via the sysfs
attribute before qmp phy is initialized.
Similarly to other qcom phy drivers, introduce a qmp->phy_initialized
variable that can be used to avoid relying on the possibly uninitialized
phy pointer.
Fixes: e464a3180a43 ("phy: qcom-qmp-usb: split off the legacy USB+dp_com support")
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722-qcom-usb-phy-fix-null-v6-3-534f7e61b9a6@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Runtime PM has to be enabled before creating the PHYs, since phy_create()
only enables runtime PM on the PHY devices if it is already enabled on
this parent device. This opens a small window where the device can be
runtime suspended after pm_runtime_enable() and before the later
pm_runtime_forbid(), causing an unnecessary suspend/resume cycle while
the PHYs are not yet registered.
Take a runtime PM usage reference with pm_runtime_get_noresume() before
enabling runtime PM and release it once the PHYs have been created to
prevent the device from being runtime suspended during that window.
This also makes the probe path safe independently of pm_runtime_forbid(),
which is a good preparation for potentially dropping the forbid() call in
the future and letting runtime PM be enabled by default.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722-qcom-usb-phy-fix-null-v6-2-534f7e61b9a6@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Runtime PM has to be enabled before creating the PHYs, since phy_create()
only enables runtime PM on the PHY devices if it is already enabled on
this parent device. This opens a small window where the device can be
runtime suspended after pm_runtime_enable() and before the later
pm_runtime_forbid(), causing an unnecessary suspend/resume cycle while
the PHYs are not yet registered.
Take a runtime PM usage reference with pm_runtime_get_noresume() before
enabling runtime PM and release it once the PHYs have been created to
prevent the device from being runtime suspended during that window.
This also makes the probe path safe independently of pm_runtime_forbid(),
which is a good preparation for potentially dropping the forbid() call in
the future and letting runtime PM be enabled by default.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722-qcom-usb-phy-fix-null-v6-1-534f7e61b9a6@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The SerDes PHY has two voltage supply rails, vdda-0p9 and vdda-1p2,
that must both be enabled for calibration to succeed. Without them:
qcom-dwmac-sgmii-phy 8909000.phy: QSERDES_COM_C_READY_STATUS timed-out
qcom-ethqos 23040000.ethernet eth0: __stmmac_open: Serdes powerup failed
The driver relied solely on the PHY framework's implicit enable of
'phy-supply', which only voted for a single rail and set no current
load. Use devm_regulator_bulk_get_const() to acquire both supplies and
set the peak current loads (46 mA for vdda-0p9, 15 mA for vdda-1p2)
as required by the hardware.
Fixes: 601d06277007 ("phy: qcom: add the SGMII SerDes PHY driver")
Signed-off-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804-b4-sgmiieth_serdes_regulator-v2-2-c4bc688177dd@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
deprecate phy-supply
The Qualcomm SGMII SerDes PHY has two distinct voltage supply rails,
vdda-0p9 and vdda-1p2. The binding incorrectly described only a single
generic supply via 'phy-supply'.
Deprecate 'phy-supply' and instead add two named supply properties. The
0.9V rail draws a peak current of 46 mA and the 1.2V rail draws 15 mA.
Fixes: 97b795125704 ("dt-bindings: phy: describe the Qualcomm SGMII PHY")
Signed-off-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804-b4-sgmiieth_serdes_regulator-v2-1-c4bc688177dd@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 212cdedcac11 ("phy: qcom-qmp: qserdes-com: Add v8
DP-specific qserdes register offsets") and commit d10736db98d2 ("phy:
qualcomm: qmp-combo: Add DP offsets and settings for Glymur platforms")
added identical header files for DisplayPort-specific registers on V8
PHYs, having different names. Get rid of one of the copies, reverting
commit d10736db98d2 ("phy: qualcomm: qmp-combo: Add DP offsets and
settings for Glymur platforms")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722-qmp-drop-duplicate-v8-v1-1-795eb7de0322@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the init sequence tables and config for the UFS QMP phy found in
the Hawi SoC.
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Palash Kambar <palash.kambar@oss.qualcomm.com>
Link: https://patch.msgid.link/20260806161301.1010876-3-palash.kambar@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Document QMP UFS PHY compatible for Hawi SoC.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Palash Kambar <palash.kambar@oss.qualcomm.com>
Link: https://patch.msgid.link/20260806161301.1010876-2-palash.kambar@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In corsairpsu_linear11_to_int(), the mantissa is extracted using bitwise
operations and cast to s16 before being shifted left:
static int corsairpsu_linear11_to_int(const u16 val, const int scale)
{
...
const int mant = (((s16)(val & 0x7ff)) << 5) >> 5;
...
}
Due to C integer promotion rules, the masked value (which is always
positive) is promoted to a 32-bit integer before the left shift. As a
result, the sign bit is never extended to bit 31 of the promoted integer.
When the device hardware reports a negative temperature in Linear11 format
(such as an ambient temperature probe reporting sub-zero), the negative
mantissa is parsed incorrectly as a massive positive value. For example,
-1 becomes 2047, which scales to 2047 degrees Celsius.
Fix the problem by type casting the result of the left shift operation
to s16.
Another problem is left-shifting of negative values. In C, the result of
left-shifting negative values is undefined. Use a multiplication instead
to avoid the problem.
Also use a local s64 variable to store temporary results, change
the return value type from int to long, and clamp the final value
to LONG_MIN and LONG_MAX to avoid under- and overflow issues while
retaining as much information as possible.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Cc: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/20260804034811.2385506-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
corsairpsu_request() sends a rail select command and then the actual
read as two separate transfers, both going through the single shared
cmd_buffer and wait_completion in corsairpsu_usb_cmd(). The hwmon core
serializes its own callers, but the debugfs files call
corsairpsu_get_value() directly and never take that lock, so a debugfs
read can land between another reader's rail select and its value read.
The result is a value from the wrong rail reported as the right one,
because corsairpsu_usb_cmd() only checks the command echo and both
transfers echo the command it expects. It can also make a caller consume
the reply meant for the other one, since raw_event() writes into the
shared buffer and completes whoever happens to be waiting.
Locking was dropped in commit 4207069edbf0 ("hwmon: (corsair-psu) Rely
on subsystem locking") on the grounds that the subsystem serializes for
us, which holds for sysfs but not for these files. Take
the same lock in the debugfs paths that issue commands, using the guard
added in commit d1e720c7328e ("hwmon: Support guard() and scoped_guard
for subsystem locks").
The lock cannot go into corsairpsu_request() itself: the hwmon core
already holds it across ->read, so every sysfs read would deadlock.
vendor_show() and product_show() only print strings cached during probe
and issue no command, and corsairpsu_get_criticals() and
corsairpsu_check_cmd_support() run before either interface is
registered, so none of them need it.
Fixes: 4207069edbf0 ("hwmon: (corsair-psu) Rely on subsystem locking")
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Tested-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/20260806142139.168611-1-ali@iusegentoo.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
ltc4282_parse_dt() evaluates the wrong variable when parsing the current
limit.
When the adi,current-limit-sense-microvolt property is parsed into
st->vsense_max, the subsequent switch statement evaluates the unrelated
val variable instead of st->vsense_max:
drivers/hwmon/ltc4282.c:ltc4282_parse_dt() {
...
ret = device_property_read_u32(dev, "adi,current-limit-sense-microvolt",
&st->vsense_max);
if (!ret) {
int reg_val;
switch (val) {
case 12500:
reg_val = 0;
break;
...
}
Because val holds a small integer representing vin_mode (from 0 to 3), it
never matches any of the valid current limit cases.
This causes it to always fall through to the default error case, return
-EINVAL, and aborts probe initialization for any device tree using this
property.
Validate st->vsense_max instead to fix the problem.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: cbc29538dbf7d ("hwmon: Add driver for LTC4282")
Cc: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When a negative value is passed to ltc4282_write_curr(), the signed long
val is cast directly to u64:
drivers/hwmon/ltc4282.c:ltc4282_write_curr() {
/* need to pass it in millivolt */
u32 in = DIV_ROUND_CLOSEST_ULL((u64)val * st->rsense, DECA * MICRO);
...
}
This cast converts negative inputs into large positive values. The
subsequent division result overflows the u32 in variable, truncating
to a pseudo-random positive value. When this is passed to
ltc4282_write_voltage_byte(), it is clamped to the maximum limit instead
of zero.
Clamp val to 0 and to the maximum supported upper limit before the cast
and assign the result to a 64-bit temporary variable before the division
to avoid the underflow and an also possible overflow.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: cbc29538dbf7d ("hwmon: Add driver for LTC4282")
Cc: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
During device initialization in ltc4282_set_max_limits(), the calculation
of the maximum power limit can suffer from a 32-bit integer overflow.
static int ltc4282_set_max_limits(struct ltc4282_state *st)
{
...
st->power_max = DIV_ROUND_CLOSEST(st->vsense_max * DECA * MILLI,
st->rsense) * st->vfs_out;
...
}
The result of DIV_ROUND_CLOSEST() evaluates to a 32-bit unsigned integer
on 32-bit architectures. This result is then multiplied by st->vfs_out,
which is a 16-bit unsigned integer. According to C promotion rules, since
both operands are 32-bit or smaller, the multiplication is performed in
32-bit precision.
If the device is configured with a low sense resistor value via the device
tree (for example, 100 nano-ohms, resulting in st->rsense = 1) and the
voltage is high, the division result can reach 343,750,000 and st->vfs_out
can be 33,280. The product of these values is approximately 11.44 trillion,
which exceeds the maximum capacity of a 32-bit integer and overflows
before being stored in st->power_max.
This overflow causes a truncated value to be assigned to st->power_max and
written to the hardware limit register. An incorrect maximum power limit
can trigger spurious power-bad faults or alarms, which may lead to the
shutdown of the monitored power rail.
Avoid the problem by calculating and storing the maximum power using 64-bit
variables.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: cbc29538dbf7d ("hwmon: Add driver for LTC4282")
Cc: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The driver currently has two issues with the external VREF regulator
handling in ads7828_probe():
1. All errors from devm_regulator_get_optional() are ignored, causing the
driver to incorrectly fall back to internal VREF even for transient
errors like -EPROBE_DEFER or genuine failures like -ENOMEM.
2. The external regulator is never enabled. The driver calls
regulator_get_voltage() without first calling regulator_enable(),
so the VREF pin may remain unpowered if the regulator is not
configured as always-on.
Fix both issues by switching to devm_regulator_get_enable_read_voltage(),
which handles regulator get, enable, and voltage read in one call.
Only -ENODEV (no regulator specified in device tree) should trigger the
fallback to internal VREF. All other errors are propagated to the caller.
Fixes: a8ddfea09566 ("hwmon: (ads7828) Accept optional parameters from device tree")
Signed-off-by: Qingshuang Fu <fuqingshuang@kylinos.cn>
Link: https://lore.kernel.org/r/20260805061645.1331652-1-fffsqian@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
termination
In theory it could be possible that the REPLY_SIZE sized buffers for
holding the vendor and product strings could be end up missing the null
termination (for example by malicious hardware built on purpose)
required by the seq_printf() call. That limits the debugfs printf calls
to a maximum string length of REPLY_SIZE.
Fixes: d115b51e0e567 ("hwmon: add Corsair PSU HID controller driver")
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/anLj9gPWRoRDbQBV@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Ihor Solodrai says:
====================
resolve_btfids: Implement BTF tags emission for kfuncs
BTF data for the kernel is generated through the following pipeline:
* DWARF is emitted by the compiler
* pahole reads in DWARF and produces BTF
* resolve_btfids makes kernel-specific btf2btf transformation and
patches .BTF_ids section
This is orchestrated by link-vmlinux.sh, gen-btf.sh and Makefile.btf
in ./scripts directory.
Historically kernel-specific BTF features were implemented in pahole,
and controlled by the feature flags. This requires kernel build
process to be aware of pahole version used for the build to set
correct runtime arguments for BTF encoding [1].
This is a burden which can be alleviated by splitting kernel/module
BTF generation in two stages:
1. Generic BTF generation from the kernel source code.
2. Kernel-specific BTF modifications to support various BPF features.
So far both stages were fused in pahole's BTF encoding. By moving
stage (2) in-tree, the dependency of kernel build on pahole can become
much more loose.
resolve_btfids is already responsible for a few kernel-specific BTF
modifications:
* .BTF.base generation for modules [2]
* BTF sorting [3]
* KF_IMPLICIT_ARGS support [4]
This series completes the migration by emitting BTF kfunc annotations
in-tree: the "bpf_kfunc" and "bpf_fastcall" decl tags and the arena
"address_space(1)" type attribute, dropping the corresponding pahole
feature flags.
The three annotations depend on two pahole feature flags:
"decl_tag_kfuncs" and "attributes". Since emission is unconditional,
each flag has to be dropped in the same commit as the emission that
replaces it.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/scripts/Makefile.btf?h=v7.1-rc5
[2] https://docs.kernel.org/bpf/btf.html#btf-base-section
[3] https://lore.kernel.org/bpf/20260109130003.3313716-4-dolinux.peng@gmail.com/
[4] https://lore.kernel.org/bpf/20260120222638.3976562-1-ihor.solodrai@linux.dev/
[5] https://lore.kernel.org/bpf/20260722233518.778854-1-ihor.solodrai@linux.dev/
[6] https://lore.kernel.org/bpf/20260617210619.1562858-1-ihor.solodrai@linux.dev/
---
v2->v3:
* Refactoring in patch #2 (Eduard)
* restructure add_arena_tagged_proto() such that first we copy the
func proto and then update param types in place
* push error messages down to arena_tag_ptr()
* introduce is_arena_arg() helper
* Docs cleanup in patch #6 (Eduard)
* Add stats in commit message for patch #1
v2: https://lore.kernel.org/bpf/20260805230648.2354989-1-ihor.solodrai@linux.dev/
v1->v2:
* The bottom part of v1 has already been landed [5][6].
* New patch #1: run btf__dedup() in finalize_btf().
* Drop the "ensure" pattern. Emission is unconditional; kbuild owns
the pahole flags, so assume input BTF is not already tagged.
* Each pahole flag is now dropped in the same commit as the emission
that replaces it.
* Fail hard with an error on invalid kfunc declarations such as an
arena flag naming a missing argument or a non-pointer type.
* Various cleanups and nits (Andrii, Emil, Jiri, Sashiko).
v1: https://lore.kernel.org/bpf/20260601221805.821394-1-ihor.solodrai@linux.dev/
---
====================
Link: https://patch.msgid.link/20260807032029.78092-1-ihor.solodrai@linux.dev
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
resolve_btfids now emits the bpf_kfunc and bpf_fastcall BTF decl tags and
the arena address_space(1) type attribute for kfuncs, which were
previously produced by pahole.
Reflect this in the in-tree comments and documentation.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://patch.msgid.link/20260807032029.78092-7-ihor.solodrai@linux.dev
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Extend test_resolve_btfids() to assert that resolve_btfids emits a
BTF_KIND_DECL_TAG named "bpf_kfunc" for every kfunc, and
"bpf_fastcall" for kfuncs marked KF_FASTCALL.
Add a btf_has_decl_tag() helper that scans the output BTF for a decl
tag matching name and target.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260807032029.78092-6-ihor.solodrai@linux.dev
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Emit the bpf_kfunc decl tag for every discovered kfunc, and bpf_fastcall
for kfuncs flagged KF_FASTCALL. These were previously produced by pahole
under --btf_features=decl_tag_kfuncs.
resolve_btfids now discovers kfuncs from the BTF ID sets [1] and
becomes the source of truth for their annotations.
Drop decl_tag_kfuncs pahole feature flag from scripts/Makefile.btf
[1] https://lore.kernel.org/all/20260722233518.778854-1-ihor.solodrai@linux.dev/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260807032029.78092-5-ihor.solodrai@linux.dev
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Extend test_resolve_btfids() to assert that resolve_btfids emits the
address_space(1) type attribute (a BTF_KIND_TYPE_TAG with kflag=1) on
the return type and/or arguments of kfuncs marked KF_ARENA_RET,
KF_ARENA_ARG1 or KF_ARENA_ARG2.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260807032029.78092-4-ihor.solodrai@linux.dev
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
For kfuncs flagged with KF_ARENA_RET, KF_ARENA_ARG1 or KF_ARENA_ARG2,
the address_space(1) attribute (a type tag with kflag=1) must be
emitted for the corresponding type in BTF. This was previously done by
pahole via the "attributes" BTF feature [1].
Implement the emission of the arena attributes in resolve_btfids: for
flagged kfuncs create a new function prototype with updated BTF types.
The original proto may be shared with sibling FUNCs, so it is not
modified in place.
Emission is unconditional: kbuild controls the pahole flags, so the
input BTF is expected to not have these attributes. Invalid
declarations are reported as errors.
Drop the "attributes" pahole feature from scripts/Makefile.btf
resolve_btfids now emits them for all supported pahole versions.
[1] https://lore.kernel.org/dwarves/20250228194654.1022535-1-ihor.solodrai@linux.dev/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://patch.msgid.link/20260807032029.78092-3-ihor.solodrai@linux.dev
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
btf2btf() adds new types to the BTF: the KF_IMPLICIT_ARGS transform
synthesizes an _impl FUNC together with its FUNC_PROTO and copies of the
kfunc's decl tags. Nothing deduplicates them afterwards. pahole runs
btf__dedup() on its own output, but that happens before resolve_btfids
sees the BTF, so any type the tool itself creates is emitted as-is, even
when a structurally identical type is already present.
Call btf__dedup() at the start of finalize_btf(), so that base
distillation and the by-name sort both operate on the canonical set of
types.
On an x86_64 build with the BPF selftests config this removes 17
duplicate FUNC_PROTOs from vmlinux BTF.
The dedup call increases runtime of resolve_btfids on vmlinux by 30-40%.
The performance hit is an acceptable cost to keep kernel BTF deduped [1].
[1] https://lore.kernel.org/bpf/986e6f4e-4b51-4440-a37c-9624906d7370@linux.dev/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://patch.msgid.link/20260807032029.78092-2-ihor.solodrai@linux.dev
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
This module sets the acpi_device_id::driver_data to 0 but
the field is not actually used within the module, we can
just drop it from the table.
While we are at it - use a named initializer for the
acpi_device_id::id field as well to make the code more
readable.
Signed-off-by: Pawel Zalewski (The Capable Hub) <pzalewski@thegoodpenguin.co.uk>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260728-acpi-bus-v1-1-12ff25fdea9b@thegoodpenguin.co.uk
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
qe_ic_of_init() ignored the return value of platform_driver_register()
and always returned success. Propagate the error to the initcall.
Fixes: be7ecbd240b2 ("soc: fsl: qe: convert QE interrupt controller to platform_device")
Signed-off-by: Linkai Gong <gonglinkai@kylinos.cn>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20260731094608.1883391-1-gonglinkai@kylinos.cn
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Up until this patch, the only protocol change supported was between
1000Base-X/SGMII and 2500Base-X. The others require an RCW override
procedure which was lacking.
Since now the guts driver provides the means of applying this procedure,
make use of it and remove any comment which mentioned the limitation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260721231603.67865-10-vladimir.oltean@nxp.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Add support for the RCW override procedure which enables runtime
reconfiguration of the protocol running on a SerDes lane. The procedure
is done through the DCFG DCSR space which now can be defined as the
second memory region of the guts DT node.
Support is added on the following SoCs: LS1046A, LS1088A, LS2088A.
The procedure is exported to the "client" driver - the Lynx10G SerDes
PHY driver - through the following functions:
- fsl_guts_lane_validate() used to validate that changing the protocol
on a specific lane is supported.
- fsl_guts_lane_set_mode() which can be used to request the RCW
procedure be executed for a specific lane.
Since the RCW override procedure is different depending on the SoC, the
private fsl_soc_data structure is updated with two new per SoC callbacks
(.serdes_get_rcw_override() and .serdes_init_rcwcr()) which get used
from the generic fsl_guts_lane_set_mode() function. These two callbacks
hide all the SoC specific register offsets, masks and values so that the
_set_mode() procedure is straightforward.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260721231603.67865-9-vladimir.oltean@nxp.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
In Layerscape (Arm) and QorIQ (PowerPC) devices, hardware peripherals
are accessed by the CPU through a portion of the SoC address space
called CCSR ("Configuration, Control, and Status Registers"). All
hardware IP blocks have their registers mapped here, and the Device
Configuration block makes no exception.
However, there exists a secondary range of the address space named DCSR
("Debug Control and Status Registers") which, like CCSR, also holds
registers of hardware IP blocks, except the DCSR contents is hidden in
all public reference manuals.
The intention of the CCSR/DCSR split, to the best of my knowledge, was
to place the functionality that is too low level for normal use, and
which is necessary only for debug, in a completely separate address
space which can be hidden.
A use case has appeared where networking SerDes lanes need to be
reconfigured at runtime for a different protocol (example: 10GBase-R to
SGMII), and the architecture of the SoCs does not normally permit that.
The Reset Configuration Word (RCW) is a data structure read by the SoC
preboot loader (PBL) which contains stuff like pinmuxing and SerDes
protocol mapping for each lane.
The RCW that the PBL has loaded is visible in the DCFG block's normal
status registers (from CCSR), as read only. Turns out, the RCW is also
mapped in the DCFG's shadow register map (in DCSR), in a write-only
form. Writing to the RCW registers from the DCFG's DCSR space to change
what the PBL has loaded is called "RCW override".
It has been validated that the RCW override procedure is necessary to
reconfigure the networking data path when a SerDes lane performs a major
protocol change. It changes some internal muxes which connect the PCS to
either the 10G MAC or to the 1G MAC.
Defining the DCSR area of the DCFG as a secondary 'reg' array element
allows operating systems to perform RCW overrides. Since it is
introduced late in the binding's lifetime, it is optional. It can be
identified by name, but also by index (first 'reg' is CCSR).
Note that while all SoCs should have a DCFG register block in DCSR, we
only need to expose it for the SoCs where the RCW override procedure is
known to be needed and has been validated.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260721231603.67865-8-vladimir.oltean@nxp.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
In a future change, struct fsl_soc_data will be extended with methods
for performing RCW override.
Since this will be performed from a calling context outside
fsl_guts_init(), we need to keep track of the soc_data that we determine
at fsl_guts_init() time, so we can reference it later.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260721231603.67865-7-vladimir.oltean@nxp.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
The guts driver will need to easily determine on which SoC it's running
when it will need to perform RCW override at runtime. The guts driver
knows this already because fsl_guts_init() reads the QorIQ/Layerscape
architectural System Version Register (SVR), but it doesn't save this
for later lookups.
Add a new qoriq_die enum to be used as an index in the fsl_soc_die
array. A new fsl_soc_die_match_one() function is also added so that we
can directly determine if the SVR is a match with a specific die.
The SVR value read from the DCFG CCSR is also kept in the global soc
structure so that it can be accessed when needed.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20260721231603.67865-6-vladimir.oltean@nxp.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Add a central fsl_guts_read() function which will take into account the
endianness that was already determined. No point is duplicating the
if-else statement each time we need to read a DCFG register.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20260721231603.67865-5-vladimir.oltean@nxp.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Add the fsl_soc_guts structure in order to pass information like base
addresses, endianness etc between the init time and the runtime
operations (RCW override) which will get added in future patches.
There is no point in mapping and unmapping the DCFG CCSR space every
time we need to make a read, just map it once and keep its reference in
this new global structure.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20260721231603.67865-4-vladimir.oltean@nxp.com
[chleroy: fixed typo on 'structure' in commit message]
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Instead of using a hardcoded value when iomapping the DCFG CCSR space,
add a new macro for it. The code will be easier to follow this way,
especially when we add support for the DCFG DCSR space as well.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20260721231603.67865-3-vladimir.oltean@nxp.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
fsl_guts_init() is about to get much more complicated and the central
error handling procedure cannot scale in its current design, unless we
add a lot of "if" conditions to detect what has been allocated and what
hasn't.
Currently the code relies on the fact that kfree(NULL) is safe, but this
doesn't scale to the case where "soc_dev_attr" itself is NULL, because
this would dereference "soc_dev_attr->family" and friends of a NULL
pointer.
Convert to the more typical error handling pattern where the teardown is
in the strict reverse order of setup, and a teardown step is only called
if its corresponding setup step was executed.
At the same time, maintain the optionality of soc_dev_attr->serial_number
by not checking whether that kasprintf() has returned NULL. In the error
path, kfree(NULL) is safe, so we don't need to add an "if" condition for
it. Michael Walle has confirmed that ignoring the error was intentional,
and we preserve that:
https://lore.kernel.org/linux-phy/DK44809N7Y8I.J2Z3U4N32H0Q@kernel.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260721231603.67865-2-vladimir.oltean@nxp.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Correct spelling of 2 words.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Guanhua Gao <guanhua.gao@nxp.com>
Cc: Roy Pledge <Roy.Pledge@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260728004938.905415-1-rdunlap@infradead.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Correct spelling of "list".
Fix a kernel-doc warning by describing the nested structure completely:
include/soc/fsl/dpaa2-fd.h:52: warning: Function parameter or member 'simple' not described in 'dpaa2_fd'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Li Yang <leoyang.li@nxp.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Guanhua Gao <guanhua.gao@nxp.com>
Cc: Roy Pledge <Roy.Pledge@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260728004924.904210-1-rdunlap@infradead.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260710110930.462109-2-panchuang@vivo.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Some QE GPIO pins have an associated interrupt line in the QE PIC to
signal state changes on the pin.
Because the GPIO controller does not perform any interrupt handling
itself, a nexus node (interrupt-map) is used to map each GPIO line
supporting IRQ to the parent QE PIC interrupt domain.
Add the to_irq() method in the corresponding GPIO controller driver,
that uses the nexus node to perform the translation.
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://lore.kernel.org/r/20260708-qe-pic-gpios-v2-10-1972044cfbd1@bootlin.com
[chleroy: Added dependency on !SPARC to fix build on sparc reported by 0-day kernel robot]
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"17 hotfixes. 15 are cc:stable. 16 are for MM.
There's a patch series from Lorenzo "mm: fix UAF caused by race
between ptdump and vmap pgtable freeing" which addresses a quite old
bug in the ptdump code.
And another series also from Lorenzo which fixes a four year old bug
in the huge_zero_folio handling.
A series from SJ fixes a few possible divide-by-zero issues which
Sashiko sniffed out. And a series which fixes handling of the
commit_inputs parameters.
The remainder are singletons, please see their changelogs for details"
* tag 'mm-hotfixes-stable-2026-08-06-18-44' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon: adjust isolated pages stat for DAMOS_MIGRATE_{HOT,COLD}
mm/damon/ops-common: putback folios on invalid migrate nid
mm/huge_memory: initialise workingset state before folio split
mm/page_table_check: skip special zero mappings
mm/damon/lru_sort: skip damon_call() if ctx has not started
mm/damon/reclaim: skip damon_call() if ctx has not started
mm/damon/lru_sort: error out for >10000 active_mem_bp
samples/damon/mtier: error out for zero quota goal target values
mailmap: map old addresses to Danila Tikhonov
mm/huge_memory: separate out CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic
mm/huge_memory: fix huge_zero_pfn race
MAINTAINERS: update address for Brendan Jackman
mm/filemap: __filemap_add_folio() restore index before retrying
microblaze: restore the page alignment of swapper_pg_dir
arm64: remove redundant concurrent ptdump UAF mitigation
mm/ptdump: always stabilise against page table freeing using init_mm
mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF
|
|
Pull smb server fixes from Steve French:
- Reject Pattern_V1 payloads when Pattern_V1 support was not
negotiated
- Validate compression transform flags and chained mode before
allocating the decompression buffer
- Enforce the pre-authentication PDU size limit before allocating
the decompression buffer, preventing compressed requests from
bypassing the limit
* tag 'v7.2-rc6-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: apply the pre-authentication PDU limit when decompressing
ksmbd: validate compression Flags before kvmalloc
smb: compress: reject Pattern_V1 when not negotiated
|
