| Age | Commit message (Collapse) | Author |
|---|
|
There is no functional requirement to keep the entries in arm64's
tools/cpucaps file sorted alphabetically and, in fact, they have fallen
out of order over time. Given that only the arm64 tree touches this file
and the perceived benefit of sorting was to help with conflicts, just
remove the stale comment and accept that we're collectively not very
good at the alphabet.
In the limited cases where a specific ordering is important, we enforce
it through build-time assertions (e.g. in can_use_gic_priorities()).
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Fuad Tabba <fuad.tabba@linux.dev>
Reported-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On systems where CLIDR_EL1.LoC == 0, no cache maintenance is required
when cleaning or invalidating to the Point of Coherency and therefore
all DMA agents can be treated as coherent.
Extend arch_setup_dma_ops() to take CLIDR_EL1.LoC into account when
setting the DMA ops for a device, emitting a warning message if the
firmware advertises a non-coherent device on a fully coherent system.
Cc: Steffen Eiden <seiden@linux.ibm.com>
Cc: Andreas Grapentin <gra@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A robust futex unlock stores 0 over the whole futex value - wiping
FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot
notification: the protocol relies on its recipient to either acquire the
futex (and eventually unlock while aware of the remaining contention) or
re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed
before it can do either, the kernel must jump in and wake the next task
down the line.
This is a known complication of the futex protocol with a previous
partial fix in commit ca16d5bee598 ("futex: Prevent robust futex exit
race"). Unfortunately, that fix is insufficient.
If a third task re-acquired the futex through the uncontended fast
path in the meantime, the notification is lost: robust exit processing
sees that it is owned by another task and does nothing, while the new
owner sees no FUTEX_WAITERS when it unlocks and wakes nobody.
The remaining waiters sleep forever behind a free futex:
A owns the futex, B and C sleep in FUTEX_WAIT
uval == A | FUTEX_WAITERS
A robust unlock: store 0, FUTEX_WAKE(1) wakes B
uval == 0
D fast path acquire: cmpxchg(0 -> D)
uval == D, no FUTEX_WAITERS
B killed before acting on the wakeup
B exit walk, pending op: owner D != B -> no action
D unlock: no FUTEX_WAITERS -> no wake
C sleeps forever
This is clearly a shortcoming in the implementation, which fails to keep
the FUTEX_WAITERS bit consistent.
Work around this by augmenting the robust list exit processing to also
perform the extra wakeup if the futex word is owned by another thread but
FUTEX_WAITERS is not set.
This does not fix the problem of a non-contended take over/release and free
sequence, which has been discussed for years and has been addressed by
commit 3ca9595d9fb6 ("futex: Add support for unlocking robust futexes") and
subsequent changes, but failed to take the problem described above into
account.
A more complete solution which is based on the in kernel unlock of
contended robust futexes has been discussed in the context of this change
and should show up in mainline sooner than later.
[ tglx: Amend change log slightly and fixup coding style ]
Fixes: ca16d5bee598 ("futex: Prevent robust futex exit race")
Signed-off-by: Keno Fischer <keno@juliahub.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Assisted-by: ClaudeCode:claude-fable-5 tla+
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260730194705.38981-1-keno@juliacomputing.com
|
|
A straightforward new architecture.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Tested-by: Michael Cree <mcree@orcon.net.nz>
Link: https://patch.msgid.link/20260722-nolibc-alpha-v2-1-4970e48eb7bf@weissschuh.net
|
|
The i2c subsystem currently blocks during adapter deregistration
whenever there are consumers holding a reference.
Switch to using of_get_i2c_adapter_by_node() which also takes a
reference to the adapter module so that an attempt to unload the module
while in use fails gracefully instead of blocking uninterruptibly.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Not handling the return code on drm_encoder_init can lead to silent
failure and/or a drm_encoder_cleanup on a non-initialized encoder.
This patch adds error handling to the drm_encoder_init calls to prevent
that from happening.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Simple KMS helper are deprecated since they only add an intermediate
layer between drivers and the atomic modesetting.
This patch removes the dependency on drm simple helpers from exynos
DRM drivers.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Dropped unnecessary blank line and reorder header definition.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
RTL8922DE is a WiFi 7 chipset, supporting 2x2 2GHz/5GHz/6GHz 4096/1024-QAM
160MHz channels. As STA, AP and P2P modes work well, enable this chipset.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-8-pkshih@realtek.com
|
|
The 9.24.1 coexistence version included firmware 0.35.111.X support for
RTL8922A/D, 0.24.97.X support for RTL8852C, 0.29.133.X support for
RTL8852B chip family.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-7-pkshih@realtek.com
|
|
The old lps_ctrl_scbd logic in _update_bt_scbd() blocked WiFi LPS only
when mode == BTC_WLINK_V0_2G_STA, which created a dead-lock while
WiFi already in LPS suppressed TDD binding so mode was never set to
BTC_WLINK_V0_2G_STA, lps_ctrl_scbd stayed 0, and WiFi remained stuck
in LPS. Port _update_bt_ctrl_lps() from the reference implementation to
check BT profile existence (A2DP, HFP, PAN) for both radios directly,
with out_of_band and freerun guards so LPS is only blocked when WiFi and
Bluetooth actually share a band. Call it from both _update_bt_scbd() and
_update_bt_info() so profile changes reported via either SCBD or BT info
C2H correctly update lps_ctrl_scbd. Also remove the dead
lps_ctrl_scbd_last field.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-6-pkshih@realtek.com
|
|
Logic should only get explicit link_mode only, to cover the old branch
link_mode_v0 using (old branch firmware needed) should do translating
after link_mode is settled. And the coexistence logic has already updated
to new branch style, so the logic should use new link_mode, don't need
to consider link_mode_v0. To prevent unexpected logic bug, refine the
related logic.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-5-pkshih@realtek.com
|
|
When a BT device is disabled, _update_bt_link_cnt() is no longer called
for that device, so its link_weight[] retains stale values from the last
active period. _set_bind_info() then computes a non-zero band score for
the disabled device, which can lead to an incorrect tdd_bind.rf_band
selection and ultimately wrong coexistence policy.
Clear link_weight[] for any disabled BT device at the start of the
_set_bind_info() loop so that stale scores are not carried forward.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-4-pkshih@realtek.com
|
|
The _update_bt_info() function always parsed BT-info for bt0 and used a
single raw_info buffer regardless of which BT device sent the packet or
which RF band it belongs to. This caused two bugs:
1. BT-info packets from bt1 were incorrectly parsed into bt0's state.
2. BT-info packets from 5/6 GHz BT (L1 bit7=1) overwrote the 2.4 GHz
link_info and raw_info, breaking duplicate detection across bands.
Fix by adding the bid parameter to select bt0/bt1, detecting the 5/6 GHz
band flag (L1 bit7) to route packets into link_info_56g with a dedicated
raw_info_56g buffer, and updating the early-return mask to ignore bit7
when checking the length field.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-3-pkshih@realtek.com
|
|
_update_bt_link_cnt() was missing the bt->link_weight[].
Without it, link_weight stays at the initial value of 5
(set on BT re-enable) regardless of the active BT profile.
_set_bind_info() uses link_weight to compute b2g_score/b5g_score, which
determines tdd_bind.rf_band. With a stale weight of 5 (below the active
profile threshold), tdd_bind.rf_band may not reflect the actual RF band,
causing mode_v0 in _run_coex() to remain 0 (BTC_WLINK_NOLINK), which
incorrectly triggers _action_wl_nc() instead of the BT-profile action.
Add the link_weight calculation to _update_bt_link_cnt() using the same
weighting table as Formal (BIS/A2DP-sink: 70, A2DP: 40-60, PAN/active: 30,
no-profile: 5, else: 9) and call _update_bt_link_cnt() from
_update_bt_info() after parsing the profile exist flags, replacing the
open-coded link_cnt increment that omitted le-audio profiles.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260730060220.55844-2-pkshih@realtek.com
|
|
Adapt H2C format to fit firmware version after 0.35.113.2, which
only supports active scanning with a provided SSID list.
The wildcard_6ghz field is no longer required for WiFi 7 chips' new
format, but not removed since WiFi 6 still requires it.
Keep original H2C style also to support older firmwares.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260729124354.3231368-4-pkshih@realtek.com
|
|
The version check with less than should check for smallest upper-bound
first, or some branch will be unreachable.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260729124354.3231368-3-pkshih@realtek.com
|
|
When an AP interface is registered and starts AP, mac80211 calls the
configure_filter() to clear B_AX_A_UC_CAM_MATCH and B_AX_A_BC_CAM_MATCH
so that frames from un-associated stations can be received. However, for
a dedicated AP interface created via iw command, configure_filter() is
only triggered on the initial AP startup. Since the interface remains up
even after hostapd stops, and it isn't triggered again on later restarts.
Additionally, each AP start causes IPS leave, reverting the RX filter to
its default value.
For WiFi 7 chips, the default value is hardcoded in rx_fltr_init_be(),
so the reverted value does not match hal.rx_fltr. Therefore, refine
the behavior of WiFi 7 chips to align with the WiFi 6 implementation.
Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260729124354.3231368-2-pkshih@realtek.com
|
|
Since the hardware rfkill polling was introduced, arm64 platforms can
panic with an asynchronous SError during warm reboot:
SError Interrupt on CPU8, code 0x00000000be000011 -- SError
Workqueue: events_power_efficient rfkill_poll [rfkill]
rtw89_pci_ops_read8+0x94/0x160 [rtw89_pci]
rtw89_core_rfkill_poll+0x50/0x1e0 [rtw89_core]
rtw89_ops_rfkill_poll+0x40/0x68 [rtw89_core]
ieee80211_rfkill_poll+0x3c/0x70 [mac80211]
cfg80211_rfkill_poll+0x40/0x2a0 [cfg80211]
rfkill_poll+0x30/0x88 [rfkill]
Kernel panic - not syncing: Asynchronous SError Interrupt
On the reboot path the kernel only runs device_shutdown(), which calls
each driver's .shutdown callback; .remove is not invoked. The rtw89 PCI
driver had no .shutdown callback, so nothing stopped the rfkill polling
work while the platform was tearing the PCIe link down. Once the link
is gone, the next MMIO read from the poll handler targets a
non-responding device and is reported as a fatal asynchronous SError on
arm64.
Add rtw89_pci_shutdown(), wired to all rtw89 PCI device drivers, which
sets a new RTW89_FLAG_SHUTDOWN flag (mirroring the USB
RTW89_FLAG_UNPLUGGED pattern). When the flag is set,
rtw89_ops_rfkill_poll() returns early, so no MMIO read is issued to the
chip after shutdown begins and the SError no longer occurs.
This does not call the full .remove path from .shutdown, to keep the
shutdown handler minimal and avoid running the non-idempotent teardown
twice.
Fixes: 0b38e6277aed ("wifi: rtw89: add support for hardware rfkill")
Cc: stable@vger.kernel.org
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yuhang.chen <yhchen312@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260729014142.2746777-1-yhchen312@gmail.com
|
|
Janne Grunau <j@jannau.net> says:
This series adds device trees for Apple silicon devices with M3 Pro, Max
and Ultra SoCs. The M3 generation has fewer devices than their M1 and M2
predecessors. The only non-laptop device is the M3 Ultra Mac Studio. The
Laptops are the known 14 and 16-inch Macbook Pros now with M3 Pro and
M3 Max SoCs. The M3 Max variant with fewer CPU and GPU cores has
additionally only a 384-bit wide memory bus instead of 512-bit of the
full M3 Max. It has a separate identifier (T6034) and so there are six
laptop device trees.
Another difference to M1 and M2 Pro/Max/Ultra is that the M3 Pro is
distinct SoC design and not a smaller M3 Max. For this reason both M3
Max variants and the M3 Ultra will use "apple,t6030" as compatible
prefix. In the M1 and M2 generations Pro, Max and Ultra SoCs shared
"apple,t6000" / "apple,t6020" as common prefix. There is currently no
known difference but M3 Pro and M3 Max are not as closely related as
previously.
This series adds the same level of hardware as the base M3 (T8122) has
in v7.2-rc1. This includes CPU cores, interrupt controller, power
states, watchdog, serial, pin controller, i2c and the boot framebuffer.
This is intended as base so that support for additional hardware can be
added to all M3 based devices at the same time.
Link: https://patch.msgid.link/20260724-apple-t603x-initial-devices-v3-0-bbeba0420603@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Minimal device trees for the M3 Pro based 14-inch and 16-inch MacBook
Pro released in November 2023. The M3 Pro is a distinct SoC design and
not a cut down version of the Max variant like for M1 and M2 Pro.
The M3 Pro has only a single cluster with up to 6 performance cores and
one cluster with 6 efficiency cores.
While it no longer shares a common SoC .dtsi the devices itself are
still similar to the ones with M3 Max. It is still useful to share the
basic device composition in t603x-j514-j516.dtsi. For the M3 Pro based
devices additional overrides for diverging pin and irq numbers are
expected.
The device trees have devices nodes for CPU cores, timer, interrupt
controller, power states, watchdog, serial, pin controller, i2c,
PWM based keyboard LED illumination and the boot framebuffer.
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Contains minimal device trees for all M3 Max and Ultra Apple silicon
devices. Those are 14-inch and 16-inch MacBook Pros with M3 Max released
in November 2023 and Mac Studio with M3 Ultra released in 2025.
This does not include M3 Pro since it is separate SoC and not a smaller
variant of the M3 Max contrary to the M1 and M2 generations.
The smaller M3 Max variant (10 performance cores) has its own chip
variant (T6034) but is clearly the same design as T6031. Besides fewer
CPU performance cores and GPU cores it misses also on fourth of the
memory controllers and thus has an aggregated bus width of 384 bit
instead of 512 bit.
Both M3 Ultra variants (28 or 32 CPU cores) are based on T6031 judging
by the advertised memory bandwidth of 819GB/s.
This uses the same multi-die macros as t600x*.dtsi and t602x.dtsi to
support M3 Max and M3 Ultra without duplicating device nodes. Since the
M3 Pro can't use the same .dtsi files "t6031*.dtsi" are used to define
common nodes for T6031, T6032 and T6034.
The device trees have devices nodes for CPU cores, timer, interrupt
controller, power states, watchdog, serial, pin controller, i2c,
PWM based keyboard LED illumination and the boot framebuffer.
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
The PWM controller on Apple silicon M3 Pro, Max and Ultra SoCs is
compatible with the t8103 (M1) one. Add "apple,t6030-fpwm" for M3 Pro
and "apple,t6031-fpwm" for M3 Max and Ultra as per-SoC compatibles.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
The i2c block on Apple silicon M3 Pro, Max and Ultra SoCs are compatible
with the t8103 (M1) one. Add "apple,t6030-i2c" for M3 Pro and
"apple,t6031-i2c" for M3 Max and Ultra as per-SoC compatibles.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
The pmgr-powerstate registers on Apple M3 Pro, Max and Ultra SoCs are
compatible with "apple,t8103-pmgr-pwrstate". Add
"apple,t6030-pmgr-pwrstate" for M3 Pro and "apple,t6031-pmgr-pwrstate"
for M3 Max and Ultra as per-SoC compatibles.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
The block on Apple M3 Pro, Max and Ultra SoCs is compatible with
"apple,t8103-pmgr". Add "apple,t6030-pmgr" and "apple,t6031-pmgr" as
per-SoC compatibles for M3 Pro and M3 Max and Ultra.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
The Apple M3 Max and Ultra SoCs use AICv3 as interrupt controller. It is
compatible to the base M3 AICv3. Add "apple,t6031-aic3" as compatible
and add it to the list for 4 #interrupt-cells used for multi-die SoCs.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
The condition for 3 or 4 #interrupt-cells list compatibles for the 3
cells variant (not used in SoCs consisting out of multiple dies). This
includes the AICv3 base compatible "apple,t8122-aic3". This will match
compatible = "apple,t6031-aic3", "apple,t8122-aic3";
shared for M3 Max and Ultra based devices which require the additional
interrupt cell for the die number.
Instead list the compatibles used for multi-die SoCs explicitly and use
4 #interrupt-cells for them.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
The M3 Pro, Max and Ultra Apple silicon SoC family (T6030, T6031, T6032
and T6034) differs from its M1 and M2 predecessors. Most notable is that
T6030 (M3 Pro) appears to be a separately designed SoC. MMIO address
spaces, interrupt and pin numbers do not match. It has two CPU clusters
with 6 efficiency or performance cores. T6031 (M3 Max) as one cluster
with 4 effciency cores and two clusters with 6 performance cores each.
T6032 (M3 Ultra) is like in the previous generations two T6031 dies
connected with an high speed interface and appears from operation system
perspective as a single SoC.
T6034 is a separate identifier for smaller M3 Max variant. It has fewer
performance CPU cores (10 instead of 12), fewer GPU cores (30 instead of
40) and less memory controllers (384-bit instead of 512-bit combined
width).
Apple has only released 14- and 16-inch Macbook Pros with T6030, T6031
and T6034 (M3 Pro and Max) and as only desktop device the Mac Studio
with T6032 (M3 Ultra).
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
The opts argument of the BPF conntrack kfuncs can point to a shared
map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read
opts->netns_id separately when acquiring and releasing the network
namespace reference.
The reference imbalance can occur as follows:
CPU 0 CPU 1
read opts->netns_id (-1)
skip get_net_ns_by_id()
write opts->netns_id (id)
read opts->netns_id (id)
put_net(net) /* no matching get */
The reverse transition leaks the reference. Repeating the unmatched put
can destroy a live namespace and crash later users.
The kernel reported:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700
Call Trace:
__sys_bpf+0x1662/0x50c0
__x64_sys_bpf+0x73/0xb0
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: Fatal exception
Snapshot every input field of opts with READ_ONCE() before validating or
using it. The netns_id snapshot keeps the namespace get/put pair
balanced, while the other snapshots keep the remaining options from
changing partway through an invocation. The individual reads can still
observe an inconsistent combination during a concurrent update, but each
selected field value remains stable for that invocation.
Fixes: aed8ee7feb44 ("net: netfilter: Deduplicate code in bpf_{xdp,skb}_ct_lookup")
Fixes: d7e79c97c00c ("net: netfilter: Add kfuncs to allocate and insert CT")
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260731160921.3245840-1-nicoyip.dev@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
The driver fails to register with error -22 (EINVAL) due to a cfg80211
validation failure in wiphy_verify_iface_combinations().
Commit 5ef0e8e2653b ("wifi: mt76: mt7996: fix iface combination for
different chipsets") added beacon_int_min_gcd to if_comb_global and
if_comb_global_7992, but these combinations include ADHOC (IBSS)
interface type. This violates a cfg80211 rule from commit 56271da29c52
("cfg80211: disallow beacon_int_min_gcd with IBSS") that explicitly
forbids combining ADHOC with beacon_int_min_gcd.
The restriction exists because beacon_int_min_gcd requires static,
predictable beacon intervals to coordinate multiple beaconing interfaces,
but ADHOC interfaces have dynamic beacon intervals that change when
joining different networks, making the GCD constraint unenforceable.
Remove beacon_int_min_gcd from the interface combinations that include
ADHOC because they are not necessary for ADHOC operation. The if_comb
combination (AP/MESH/STA only, without ADHOC) correctly retains
beacon_int_min_gcd for multi-AP coordination.
Fixes: 5ef0e8e2653b ("wifi: mt76: mt7996: fix iface combination for different chipsets")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Tested-by: Alex Gavin <alex.gavin@candelatech.com>
Link: https://patch.msgid.link/20260702104337.679536-1-jtornosm@redhat.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt76_phy_init() sets NL80211_FEATURE_ACTIVE_MONITOR for every mt76 device,
but mt792x firmware does not honor it: entering active monitor mode stops
RX. Gate the feature behind a new per-phy no_active_monitor flag and set it
for mt792x.
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260722011302.113060-1-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The STAT-pin interrupt is devm-managed, so it stays armed until the devm
cleanup that runs after remove() returns. remove() cancels
bq->iilimit_setup_work while the threaded handler can still fire; that
handler reschedules the work and dereferences bq, so the work runs
against freed memory once devm frees bq.
Make the delayed work device-managed with devm_delayed_work_autocancel(),
registered before the interrupt request. The devm cleanup then releases
the interrupt first, so the handler can no longer reschedule the work,
and cancels the work before bq is freed. The explicit
cancel_delayed_work_sync() in remove() is no longer needed and is dropped.
Found by static analysis.
Fixes: 2219a935963e ("power_supply: Add TI BQ24257 charger driver")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731143554.334179-1-fanwu01@zju.edu.cn
Link: https://patch.msgid.link/20260801051958.354528-1-fanwu01@zju.edu.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
sk_psock_msg_verdict() takes a socket reference for psock->sk_redir.
tcp_bpf_send_verdict() copies that pointer while holding the source socket
lock, but does not take a reference for the local copy before dropping the
lock around tcp_bpf_sendmsg_redir().
When apply_bytes keeps the cached verdict active, another sendmsg() on the
same source socket can consume the remaining bytes and release the cached
reference while the first thread still holds only the raw local pointer:
CPU 0 CPU 1
sk_redir = psock->sk_redir
apply_bytes remains nonzero
release_sock(sk)
lock_sock(sk)
apply_bytes reaches zero
psock->sk_redir = NULL
release_sock(sk)
tcp_bpf_sendmsg_redir(sk_redir)
sock_put(sk_redir)
tcp_bpf_sendmsg_redir(sk_redir)
The final sock_put() can free sk_redir before CPU 0 dereferences it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tcp_bpf_sendmsg_redir+0xf39/0x1020
Read of size 8 at addr ffff888108537090 by task poc/87
Call Trace:
tcp_bpf_sendmsg_redir+0xf39/0x1020
tcp_bpf_sendmsg+0x977/0x1a50
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 85:
sk_prot_alloc+0x56/0x210
sk_clone+0x6f/0x14b0
inet_csk_clone_lock+0x24/0x740
tcp_create_openreq_child+0x25/0x2710
tcp_v4_syn_recv_sock+0x10a/0xe00
Freed by task 0:
__kasan_slab_free+0x43/0x70
slab_free_after_rcu_debug+0xa6/0x1e0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__sk_destruct+0x3da/0x540
sk_psock_destroy+0x81e/0xab0
process_one_work+0x63a/0x1070
Take a temporary socket reference while the source socket lock still
protects psock->sk_redir, and drop it after tcp_bpf_sendmsg_redir()
returns. This keeps each unlocked use independent of cached-verdict
ownership.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20260719152207.2892156-1-nicoyip.dev@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
qcom_battmgr_pdr_notify() queues enable_work when the PMIC GLINK service
comes up, and the worker recovers battmgr through container_of() to issue
firmware requests. The PMIC GLINK client stays on the client list until
its devres release action runs, so a PDR notification can keep queueing
the work, and a pending or running worker can access battmgr after devres
frees it.
Make enable_work device-managed with devm_work_autocancel(), registered
before the PMIC GLINK client is allocated. The devres cleanup then
releases the client first, so no further notification can queue the work,
and cancels the work before battmgr is freed.
This issue was found by an in-house static analysis tool.
Fixes: 29e8142b5623 ("power: supply: Introduce Qualcomm PMIC GLINK power supply")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731022006.317192-1-fanwu01@zju.edu.cn
Link: https://patch.msgid.link/20260801051923.354496-1-fanwu01@zju.edu.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull i2c fixes from Andi Shyti:
"A set of fixes across several host controller drivers. The largest
part addresses three issues in the i.MX driver, while the remaining
changes fix probe ordering, power management, timeout recovery and
error handling.
amd-mp2:
- unregister callback if adapter registration fails
designware:
- defer probe until child GPIO controllers are bound
imx:
- mark adapter suspended while hardware is powered down
- fix stale slave pointer and shared IRQ registration race
- stop slave timer before clearing slave pointer
iproc:
- reset controller if START_BUSY remains set after timeout
jz4780:
- cache clock rate to avoid clk_get_rate() deadlock
qcom-cci:
- rely on runtime PM helpers for system sleep
spacemit:
- request interrupt after clock initialization"
* tag 'i2c-fixes-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: qcom-cci: drop custom suspend/resume and rely on runtime PM helpers
i2c: imx: Cancel hrtimer before clearing slave pointer
i2c: imx: Fix slave registration race and error handling
i2c: iproc: reset bus after timeout if START_BUSY is stuck
i2c: imx: mark I2C adapter when hardware is powered down
i2c: designware: defer probe if child GpioInt controllers are not bound
i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock
i2c: amd-mp2: Unregister callback on adapter add failure
i2c: spacemit: request IRQ after controller initialization
|
|
On WCN3990/SNOC the MSA region is mapped with devm_memremap(MEMREMAP_WT).
On arm64 such a mapping is not Normal-cacheable, so unaligned accesses to
it are not permitted. ath10k_msa_dump_memory() copies the region with a
plain memcpy(), whose optimized __pi_memcpy_generic implementation issues
wide/unaligned loads. This triggers an alignment fault (FSC=0x21) Oops in
ath10k_snoc_fw_crashed_dump() while collecting the devcoredump:
Unable to handle kernel paging request ... FSC=0x21: alignment fault
pc : __pi_memcpy_generic
lr : ath10k_snoc_fw_crashed_dump [ath10k_snoc]
The Oops both leaves the firmware RAM dump buffer zeroed (no dump is
captured) and crashes the kernel, which in turn breaks modem SSR
recovery.
Use memcpy_fromio(), which only performs accesses that are valid for such
a device-memory mapping. The generic memcpy_fromio() implementation aligns
the source before issuing word-sized reads and stores the destination with
put_unaligned(), so it is also safe for the coherent DMA allocation used on
the non-reserved-memory path. ath11k and ath12k use the same pattern
when copying target memory into crash dumps, so call it unconditionally
here too.
The MEMREMAP_WT pointer is a plain void *, so an explicit __iomem cast is
needed; use __force to keep sparse happy.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.3.7.c5-00107-QCAHLSWMTPL-1
Fixes: 3f14b73c3843 ("ath10k: Enable MSA region dump support for WCN3990")
Signed-off-by: Linghui Wu <linghui.wu@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260727072629.2297208-1-linghui.wu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When UTF monitor is enabled, ath10k forwards WMI events to nl80211
testmode. Non-UTF events can therefore be delivered to userspace and
confuse FTM tools which expect only UTF responses.
Only forward known UTF event IDs from WMI event namespaces that route
events through ath10k_tm_event_wmi(), and drop other WMI events while UTF
monitor is active. READY events are still handled by the normal WMI
receive path.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.3.7.c5-00093.2-QCAHLSWMTPL-1
Signed-off-by: Linghui Wu <linghui.wu@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730023226.707008-1-linghui.wu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When a vif operates with IEEE80211_OFFLOAD_ENCAP_ENABLED,
mac80211 delivers EAPOL frames to ath12k in native-WiFi format.
Unencrypted EAPOL frames used during the initial 4-way
handshake are already handled through the existing
is_diff_encap path. However, EAPOL frames transmitted during
GTK rekeying carry ATH12K_SKB_CIPHER_SET and continue through
the normal native-WiFi transmit path.
Firmware encryption requires RAW frames with cipher-specific IV and ICV
fields correctly provisioned in the skb. Passing encrypted EAPOL frames
in native-WiFi format results in incorrect IV provisioning, leading to
an invalid ICV and frame drop.
Fix this by detecting the EAPOL frames that need HW encryption and
converting them to firmware-encrypted RAW frames before transmission.
Reserve IV space after the MAC header, append ICV space at the tail,
select the appropriate firmware encryption type and request
firmware-side encryption.
Introduce ath12k_dp_tx_crypto_iv_len() and ath12k_dp_tx_crypto_icv_len()
helpers in the TX path to obtain cipher-specific IV and ICV lengths.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01270-QCAHKSWPL_SILICONZ-1
Fixes: d29591d5b52e ("wifi: ath12k: Advertise encapsulation/decapsulation offload support to mac80211")
Signed-off-by: Reshma Immaculate Rajkumar <reshma.rajkumar@oss.qualcomm.com>
Reviewed-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729171732.668367-1-reshma.rajkumar@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When mac80211 leaves the link unspecified, mt7996_tx() substitutes the
primary link id of the station or vif. That value is
IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added,
and it is then used unchecked to index vif->link_conf[],
mvif->mt76.link[] and sta->link[], all of which hold
IEEE80211_MLD_MAX_NUM_LINKS (15) entries.
Clamp the primary link id to the default link before using it, and use
the clamped value for the link_sta fallback as well.
Fixes: 1609b014aa29 ("wifi: mt76: mt7996: Overwrite unspecified link_id in mt7996_tx()")
Link: https://patch.msgid.link/20260801145334.1166751-10-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt76_vif_link() indexes mvif->link[] without validating link_id, but
callers pass mvif->deflink_id / msta->deflink_id, which hold
IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added.
Since IEEE80211_MLD_MAX_NUM_LINKS is 15, that reads one element past the
end of the array, aliasing mt76_vif_data.offchannel_link.
Reachable via mt7996_set_tsf()/mt7996_offset_tsf() and
mt7996_net_fill_forward_path(). Bounds check link_id and return NULL,
matching mt7996_sta_link() and mt7996_sta_link_protected().
Fixes: a9384b36a42a ("wifi: mt76: mt7996: rework set/get_tsf callabcks to support MLO")
Link: https://patch.msgid.link/20260801145334.1166751-9-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The PS queue filed redirected frames under the TID taken from the TXD,
while mac80211 was told about the TID taken from the QoS header, or TID 0
for anything that is not a QoS data frame. When the two disagree,
mt7603_release_buffered_frames() skips the frame because it does not
match the requested TIDs, so it stays in the PS queue until the station
wakes up. Buffered MMPDUs hit this whenever they were sent on a
non-zero TID.
Use one TID for both.
Link: https://patch.msgid.link/20260801145334.1166751-8-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Releasing buffered frames has to turn off the PSE redirect for the
station, otherwise the released frames are looped straight back into the
driver PS queue. Nothing ever turns it back on: mt7603_sta_ps() only runs
on an observed PM bit transition, and MT_WCID_FLAG_PS keeps mt76 from
reporting the same state twice. After the first service period the
hardware therefore treats a dozing station as awake and transmits at it
directly, which is where the retry storms and the packet loss reported
against U-APSD clients come from.
Re-arm hardware buffering from mt7603_mac_work() for every station that
is still known to be asleep, once the PSD queue has drained and the
released frames have passed the redirect stage. Frames that are still
queued belong to the service period that was just served, so unlike on a
sleep transition they must not be pulled back with mt7603_filter_tx().
Track the sleep state separately from the WTBL state, so a station that
wakes up while the re-arm is pending is not put back to sleep.
Link: https://patch.msgid.link/20260801145334.1166751-7-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt7603_rx_loopback_skb() marks a TID as buffered when the hardware
redirects a frame into the driver PS queue, but nothing ever clears that
state again. mac80211 therefore keeps the TIM bit set for the station and
keeps routing every service period to the driver, which also prevents it
from releasing frames it has buffered itself.
Clear the buffered state for every requested TID that has no frames left
in the PS queue.
Link: https://patch.msgid.link/20260801145334.1166751-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Frames released from the driver PS queue were all tagged with MORE_DATA
and none of them ever carried the EOSP bit, so from the client's point of
view a U-APSD service period was started but never finished. Clients that
keep their receiver on until EOSP arrives stop sending trigger frames,
and all downlink traffic for that station stalls until they give up.
ieee80211_sta_eosp() only cleared the service period state inside
mac80211, which is why the mismatch went unnoticed.
Assign MORE_DATA per frame and set the wire EOSP bit on the last one. If
the last released frame is a bufferable MMPDU it has no QoS control field
to carry EOSP, so let mac80211 append a QoS-Null frame instead.
Also stop handing the remaining frame budget to
mt76_release_buffered_frames() once frames have been released from the PS
queue: both would signal the end of the same service period. Releasing
fewer frames than requested is allowed, and MORE_DATA tells the client to
trigger again.
Link: https://patch.msgid.link/20260801145334.1166751-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
When the driver implements .release_buffered_frames, mac80211 leaves the
U-APSD signalling entirely to the driver: "In this case it is also
responsible for setting the EOSP flag in the QoS header of the frames"
(include/net/mac80211.h). Only IEEE80211_TX_STATUS_EOSP was being set,
which merely ends the service period inside mac80211, so on air the
service period was never terminated. Clients that wait for EOSP before
going back to doze keep the SP open and stop triggering, which stalls all
downlink traffic for that station.
Set the wire EOSP bit on the last frame of a U-APSD service period.
EOSP has no meaning for a PS-Poll response, so pass the release reason
down and leave those frames alone.
Link: https://patch.msgid.link/20260801145334.1166751-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enable MT_DRV_HW_PS_BUFFERING and handle MCU_UNI_EVENT_PS_SYNC with
all three TLV formats (single client, multi-client packed entries,
and bitmap).
Link: https://patch.msgid.link/20260801145334.1166751-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enable MT_DRV_HW_PS_BUFFERING and handle MCU_EXT_EVENT_PS_SYNC to
track station power-save state via firmware notifications.
Link: https://patch.msgid.link/20260801145334.1166751-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add MT_DRV_HW_PS_BUFFERING flag for drivers where firmware controls
the TIM bit based on buffered frames. Instead of blocking all TX to
PS stations (which starves firmware and prevents TIM from being set),
allow limited frame delivery using AQL pending airtime as the
throttle. Replenish the firmware buffer on TX completion.
Add mt76_sta_ps_transition() helper for drivers to call from MCU
PS sync events.
Link: https://patch.msgid.link/20260801145334.1166751-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Trivial white-space only changes to adjust to DTS coding style and fix
dt-check-style strict warnings like:
[required-blank-lines] child node must be preceded by a blank line
[continuation-alignment] continuation should align to column 39 (under < or ")
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260801-b4-dts-coding-style-strict-v2-8-f09a659ab80d@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
'status' property is special, thus DTS coding style expects it to be
always the last property preceded with a blank line, as reported by
dt-check-style:
[required-blank-lines] "status" must be preceded by a blank line
[property-order] property 'phy-mode' out of canonical order (should sort before 'status')
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260801-b4-dts-coding-style-strict-v2-7-f09a659ab80d@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
