| Age | Commit message (Collapse) | Author |
|---|
|
As recently raised on the mailing list, it may be useful to propose a
list of steps to go through in order to prove the devices have been
described correctly, especially since all the block protection
information is not stored in any kind of table and is instead filled
manually by developers.
Use the debugfs output to ease the comparison between expectations and
reality.
[rdunlap@infradead.org: fix build warning]
Link: https://lore.kernel.org/linux-mtd/20260526172341.773398-1-rdunlap@infradead.org/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
|
|
Tegra264 contains three pin controllers. Document their compatible strings
and describe the list of pins and functions that they provide.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Tegra238 contains two pin controllers. Document their compatible strings
and describe the list of pins and functions that they provide.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add the 'nand-randomizer' property to control the data randomizer
feature. This is used to improve data reliability by reducing
cell-to-cell interference.
Depending on the hardware architecture, this property is designed to be
generic and can apply to either the NAND chip's internal randomizer
or the hardware randomizer engine embedded in the NAND host controller.
This property is defined as a uint32 enum (0 or 1) instead of a simple
boolean. This design choice explicitly supports the "not present" case.
If the property is omitted, the driver will not interfere and will leave
the randomizer in its current state (e.g., as already configured by the
bootloader or hardware default).
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
QUIRK_FLAG_IFB_SILENCE_ON_EMPTY was introduced into usb-audio before
without appropriate documentation, so add it.
Fixes: a23812004228 ("ALSA: usb-audio: add IFB_SILENCE_ON_EMPTY quirk for Behringer Flow 8")
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260527-uac-quirk-get-cur-vol-v1-1-e9362b712e5e@rong.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Document the new compatibles used on Meta Rainiera6.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Cheng <neilcheng0417@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
Add YAML netlink spec for the OVS_PACKET_FAMILY (ovs_packet).
This completes the set of OVS genetlink family specs (ovs_datapath,
ovs_flow, ovs_vport already exist).
The spec defines three operations: MISS (event), ACTION (event),
and EXECUTE (do). MISS and ACTION are kernel-to-userspace upcalls
sent via genlmsg_unicast(); EXECUTE is the only registered genl
operation.
Key, actions, and egress-tun-key attributes are typed as binary
rather than nest because the nested attribute definitions belong
to the ovs_flow spec and cross-spec references are not supported
by the YNL framework.
Signed-off-by: Minxi Hou <houminxi@gmail.com>
Link: https://patch.msgid.link/20260522174154.720293-2-houminxi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the QPIC-SPI-NAND flash controller present in ipq5210 is the same
as the one found in ipq9574, document the ipq5210 compatible and with
ipq9574 as the fallback.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260514-ipq5210-nand-v1-1-cbdd7492e826@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Riverdi RVT70HSLNWCA0 is a 7.0" WSVGA (1024x600) IPS TFT LCD LVDS
panel used in the Riverdi RVT70HSDNWCA0 display module.
The Riverdi RVT101HVLNWC00 is a 10.1" WXGA (1280x800) IPS TFT LCD LVDS
panel used in the Riverdi RVT101HVDNWC00 display module.
Link: https://download.riverdi.com/RVT70HSLNWCA0/DS_RVT70HSLNWCA0_Rev.1.4.pdf
Link: https://download.riverdi.com/RVT101HVLNWC00/DS_RVT101HVLNWC00_Rev.1.4.pdf
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260522161105.277519-17-ivitro@gmail.com
|
|
Add the NEC LCD Technologies,Ltd. NL6448BC33-70C 10.4" 640x480 LCD panel.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260518-v7-1-topic-panel-simple-nl6448bc33-v3-1-21ea14a6e835@pengutronix.de
|
|
Add dt-bindings for 10.1" TFT LCD module from Ampire Co. Ltd.
as part of panel-simple.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260515082232.1766586-1-dario.binacchi@amarulasolutions.com
|
|
Add the amlogic,t7-thermal compatible for the Amlogic T7 thermal sensor.
Unlike existing variants which use a phandle to the ao-secure syscon,
the T7 relies on a secure monitor interface described by a phandle and
a sensor index argument.
The T7 integrates multiple thermal sensors, all accessed through the
same SMC call. The sensor index argument is required to identify which
sensor's calibration data the secure monitor should return, as a single
SM_THERMAL_CALIB_READ command serves all of them.
Introduce the amlogic,secure-monitor property as a phandle-array and
make amlogic,ao-secure or amlogic,secure-monitor conditionally required
depending on the compatible.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260424-add-thermal-t7-vim4-v5-1-9040ca36afe2@aliel.fr
|
|
Document Temperature Sensor (TSENS) on Qualcomm Nord SoC.
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504081236.825755-1-shengchao.guo@oss.qualcomm.com
|
|
In order to allow comparing trace timestamps between different
systems or virtual machines on s390, add a s390-tod trace clock.
This clock just uses the returned TOD clock value from stcke
directly.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The st,stmpe-pwm binding is already covered by the MFD schema
Documentation/devicetree/bindings/mfd/st,stmpe.yaml. Remove the
obsolete and redundant text binding file.
Signed-off-by: Manish Baing <manishbaing2789@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260523173251.72540-3-manishbaing2789@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
The PWM controller in SpacemiT K3 SoC reuse the same IP as previous K1
generation, while the difference is that one additional bus clock is
added.
Signed-off-by: Yixun Lan <dlan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260428-03-k3-pwm-drv-v2-1-a532bbe45556@kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
This option was never meant to be used in production because it solely
clears the X86_FEATURE kernel-internal representation of what CPUID bits
it has detected and doesn't do any *proper* feature disablement like
clearing CR4.CET in the user shadow stack case, for example.
So remove its documentation so that it doesn't get used in production
and people get silly ideas. It is meant strictly for debugging; and if
a chicken bit for properly disabling a feature is warranted, then that
would need proper enablement.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://patch.msgid.link/20260520202508.160112-1-bp@kernel.org
|
|
These networking subsystems were removed in commit dd8d4bc28ad7
("net: remove ax25 and amateur radio (hamradio) subsystem"),
but the sysctl directory table still listed them.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260515180200.1490926-1-costa.shul@redhat.com>
|
|
Update the Brazilian Portuguese translation of changes.rst to align with
the latest English version.
Key changes include:
- Updated minimum versions for Rust (1.85.0), bindgen (0.71.1), and
pahole (1.22).
- Fixed ReST syntax for internal references (:ref:) and external links.
- Corrected formatting for tool names and config options using inline
code backticks.
- Synchronized technical descriptions for udev, kmod, and NFS-utils.
v2:
- Fix alignment in the minimal software requirements table that broke the build.
- Fix Sphinx footnote syntax.
Signed-off-by: Daniel Pereira <danielmaraboo@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260515182200.654324-1-danielmaraboo@gmail.com>
|
|
Translate the "No MIME, no links, no compression, no attachments.
Just plain text" and "Respond to review comments" sections in
Documentation/translations/ja_JP/process/submitting-patches.rst.
Keep the wording close to the English text and wrap lines to match
the style used in the surrounding Japanese translation.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Acked-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260513131111.432772-1-weibu@redadmin.org>
|
|
The last maintainer's entry ("THE REST") is meant to be at the
end. Ensure that.
While here, use a case-insensitive sort to avoid placing "iSCSI"
near the end.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <b4f45565eff4ba6f01e84a6877813038a23ba83b.1778952682.git.mchehab+huawei@kernel.org>
|
|
glob root_dir parameter requires Python 3.10, which is more than
our current Python minimal requirement.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <930036c189414f3f7096c22269687489f8566dd9.1778952682.git.mchehab+huawei@kernel.org>
|
|
Replace "privilges" with "privileges"
Signed-off-by: Sakurai Shun <ssh1326@icloud.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260517022456.5895-1-ssh1326@icloud.com>
|
|
Replace "regsister" with "register"
Signed-off-by: Sakurai Shun <ssh1326@icloud.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260517043303.17111-1-ssh1326@icloud.com>
|
|
Fixes: a03ef333fbd6 ("Documentation: security-bugs: explain what is and is not a security bug")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <da8ee1e8b4e99261ec11544c4e1a4f81316ae965.1779032501.git.baruch@tkos.co.il>
|
|
Translate Documentation/process/kernel-docs.rst into Portuguese (pt_BR)
and update the main index.
The content was adapted following the RST formatting rules and the
appropriate technical terminology for Brazilian Portuguese.
Signed-off-by: Daniel Pereira <danielmaraboo@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260519140035.1031694-1-danielmaraboo@gmail.com>
|
|
Common understanding of word "Reviewer" is: a person performing a review
work [1]. Tools are not persons, thus cannot be reviewers in this term.
Also tools cannot make statements and cannot take responsibility for the
review.
Our docs already clearly mark that "Reviewed-by" must come from a
person:
- "By offering my Reviewed-by: tag, I state that:"
Usage of first person "I" and word "state"
- "A Reviewed-by tag is *a statement of opinion* that the patch is an
appropriate modification of the kernel without any remaining serious"
Only a person can make a statement of opinion.
- "Any interested reviewer (who has done the work) can offer a
Reviewed-by"
A person can offer a tag thus above does not grant the tool
permission to offer a tag.
However this might not be enough, so let's clarify that only a person
with a known identity can state the "Reviewer's statement of oversight".
Link: https://en.wiktionary.org/wiki/reviewer [1]
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260520154846.162170-2-krzysztof.kozlowski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next into for-7.2
|
|
Move constants and functions to be inside the impls of the types they
are related to. This makes it more obvious what each type and value is
for.
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260525-fix-vbios-v5-21-e5e455251537@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add support for hardware-wrapped encryption keys to the
dm-inlinecrypt target.
Introduce a new optional argument <key_type> to indicate
whether the provided key is a raw key or a hardware-wrapped
key. Based on this flag, the appropriate blk-crypto key type
is selected when initializing the key.
This allows dm-inlinecrypt to work with hardware that requires
keys to be wrapped and managed by the underlying inline
encryption engine.
Update the target argument parsing accordingly and pass the
key type to blk_crypto_init_key(). Documentation is also
updated to reflect the new parameter and usage.
Signed-off-by: Linlin Zhang <linlin.zhang@oss.qualcomm.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: e7f57d2c47e2 ("dm-inlinecrypt: add target for inline block device encryption")
|
|
Tejun Heo says:
====================
This makes BPF arena memory directly dereferenceable from kernel code
(struct_ops callbacks, kfuncs). Each arena gets a per-arena scratch page
that an arch fault hook installs into empty PTEs on kernel-side faults,
after KFENCE. The faulting instruction retries and the violation is reported
through the program's BPF stream.
v4:
- Patch 1: note that the strict-zero cmpxchg is narrower than pte_none() in
inline comments on both x86 and arm64. (Andrea)
- Patch 2: stub bpf_arena_handle_page_fault() for !CONFIG_BPF_SYSCALL via a
new include/linux/bpf_defs.h. (lkp)
- Patch 7: scx_arena_alloc() retries via a loop instead of a single retry on
pool growth. (Andrea)
- Picked up Reviewed-by tags from Emil and Andrea.
v3: https://lore.kernel.org/r/20260520235052.4180316-1-tj@kernel.org
v2: https://lore.kernel.org/r/20260517211232.1670594-1-tj@kernel.org
v1 (RFC): https://lore.kernel.org/r/20260427105109.2554518-1-tj@kernel.org
Motivation
----------
sched_ext's ops_cid.set_cmask() hands the BPF scheduler a struct scx_cmask
*. The kernel translates a kernel cpumask to a cmask, but it had no way to
write into the arena, so the cmask lived in kernel memory and was passed as
a trusted pointer. BPF cmask helpers all operate on arena cmasks though, so
the BPF side had to word-by-word probe-read the kernel cmask into an arena
cmask via cmask_copy_from_kernel() before any helper could touch it. It
works, but is clumsy.
The shape isn't unique to set_cmask. Sub-scheduler support is on the way and
more sched_ext callbacks will want to pass structured data to BPF. Anywhere
a kfunc or struct_ops callback wants to hand a struct to a BPF program,
arena residence is the natural answer.
Approach
--------
Each arena gets a per-arena scratch page. Arenas stay sparsely mapped as
today - PTEs are populated only for allocated pages. A new arch fault hook
(bpf_arena_handle_page_fault) is wired into x86 page_fault_oops() and arm64
__do_kernel_fault(), after KFENCE. When a kernel-side access faults inside
an arena's kern_vm range, the helper walks the stack to find the BPF program
responsible, range-checks the fault address against prog->aux->arena, and
atomically installs the scratch page into the empty PTE via the new
ptep_try_set() wrapper. The kernel instruction retries and reads/writes the
scratch page. Free paths and map destruction treat scratch as non-owned.
Real allocation refuses to overwrite scratch (apply_range_set_cb returns
-EBUSY). A scratched address stays dead until map destroy, since its
presence means the BPF program has already malfunctioned.
The mechanism is default behavior - no UAPI flag.
What this preserves
-------------------
All the debugging properties of today's sparse-PTE design are preserved:
* BPF programs still fault on unmapped arena accesses. The fault semantics
(instruction retry with rdst = 0) and the violation report through
bpf_streams are unchanged for prog-side accesses.
* The first kernel-side touch of an unmapped address is reported via
bpf_streams the same way as a prog-side fault, with the stack walk
attributing it to the originating prog.
* User-side fault on a never-scratched address still lazy-allocates a real
page (or returns SIGSEGV under BPF_F_SEGV_ON_FAULT). User-side fault on a
scratched address SIGSEGVs.
What changes for the kernel-side caller is just that an unmapped deref no
longer oopses - it retries through the scratch page and emits a violation
report. The same shape today's BPF instruction faults have.
Patches 1-2 (atomic PTE install + arena scratch-page recovery)
--------------------------------------------------------------
mm: Add ptep_try_set() for lockless empty-slot installs
bpf: Recover arena kernel faults with scratch page
Patches 3-5 (helpers used by struct_ops registration)
-----------------------------------------------------
bpf: Add sleepable variant of bpf_arena_alloc_pages for kernel callers
bpf: Add bpf_struct_ops_for_each_prog()
bpf/arena: Add bpf_arena_map_kern_vm_start() and bpf_prog_arena()
====================
Link: https://lore.kernel.org/bpf/20260522172219.1423324-1-tj@kernel.org/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Document the new sysfs interface that exposes Configuration Security
Unit (CSU) registers through the zynqmp-firmware driver.
The interface is available under:
/sys/devices/platform/firmware:zynqmp-firmware/csu_registers/
The CSU registers are discovered at boot time using the PM_QUERY_DATA
firmware API. The following registers are currently supported:
- multiboot (CSU_MULTI_BOOT)
- idcode (CSU_IDCODE, read-only)
- pcap-status (CSU_PCAP_STATUS, read-only)
Read operations use the existing IOCTL_READ_REG firmware interface,
while write operations use IOCTL_MASK_WRITE_REG.
Access control is enforced by the firmware. Write attempts to
read-only registers are rejected by firmware even though the sysfs file
permissions allow writes.
Document the ABI entry accordingly.
Signed-off-by: Ronak Jain <ronak.jain@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20260520093654.3303917-2-ronak.jain@amd.com
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Troy Mitchell <troy.mitchell@linux.spacemit.com> says:
On some SoCs (e.g. SpacemiT K3), multiple I2S controllers share the
same physical BCLK. When one controller is already streaming, the
others must use hw_params that result in the same BCLK rate, otherwise
the shared clock would be reconfigured and corrupt the active stream.
This series adds framework-level support for this constraint:
Patch 1 adds the dt-bindings for the spacemit,k3-i2s compatible.
The K3 SoC uses the same I2S IP as K1 but requires additional clocks:
a dedicated sysclk_div, along with c_sysclk and c_bclk which are
shared across multiple I2S controllers.
Patch 2 adds a DEFINE_GUARD wrapping snd_soc_card_mutex_lock() and
snd_soc_card_mutex_unlock() so that scope-based locking picks up the
SND_SOC_CARD_CLASS_RUNTIME lockdep subclass.
Patch 3 adds the constraint logic in soc-pcm.c. During PCM open,
every DAI that has a bclk clock pointer gets a hw_rule registered
unconditionally. The rule callback runs at hw_refine time: it scans
the card for an active peer sharing the same physical BCLK (via
clk_is_match()) that has already completed hw_params, then constrains
the current stream's rate to match the established BCLK rate. The
first DAI to complete hw_params is unconstrained; subsequent DAIs
must match. Two modes are supported:
- Default (I2S): BCLK = rate * channels * sample_bits. The rule
derives the valid rate range from the current channel and
sample_bits intervals.
- Explicit ratio (TDM): if the driver sets dai->bclk_ratio
(e.g. slots * slot_width), the rule computes the single valid
rate as active_bclk_rate / bclk_ratio.
This series was prompted by review feedback on the SpacemiT K3 I2S
series, where a vendor-specific fixed-sample-rate property was rejected
in favor of a generic framework solution:
https://lore.kernel.org/all/afFqgF6ZRwYdfUmL@sirena.co.uk/
Link: https://patch.msgid.link/20260522-i2s-same-blk-v4-0-a71a86faaa20@linux.spacemit.com
|
|
SoC1 in the AST2700 integrates its own pin controller responsible for
pin multiplexing and pin configuration.
The controller manages various peripheral functions such as eSPI, LPC,
VPI, SD, UART, I2C, I3C, PWM and others through SCU registers.
The binding reuses the standard pinmux and generic pin configuration
schemas and does not introduce custom Devicetree properties.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Neil Armstrong <neil.armstrong@linaro.org> says:
Add support for the SG Micro SGM3804 Single Inductor Dual Output
Buck/Boost Converter used to power LCD panels a provide positive
and negative power rails with configurable voltage and active
discharge function for each output.
The SGM3804 is powered by the enable GPIO pins inputs and only
supports I2C write messages.
In order to add flexibility and simplify the driver, the
regmap cache is enabled and populated with default values
since we can't write registers when the 2 GPIOs are down.
This regulator is used to provide vsn and vsn power to the
Ayaneo Pocket S2 dual-DSI LCD panel.
Link: https://patch.msgid.link/20260522-topic-sm8650-ayaneo-pocket-s2-sgm3804-v5-0-bd6b1c300ecc@linaro.org
|
|
Document the SG Micro SGM3804 Single Inductor Dual Output Buck/Boost
Converter used to power LCD panels a provide positive and negative
power rails with configurable voltage and active discharge function
for each output.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260522-topic-sm8650-ayaneo-pocket-s2-sgm3804-v5-1-bd6b1c300ecc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Similar to other HWMON sensors add a section in the
documentation describing the sysfs attributes, their
permissions and a short description.
Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
Link: https://lore.kernel.org/r/20260417054511.5432-1-flaviu.nistor@gmail.com
[groeck: Removed trailing ":" from attribute names; fixed minor typo]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for MPS mp2985 controller. This driver exposes
telemetry and limit value readings and writtings.
Signed-off-by: Wensheng Wang <wenswang@yeah.net>
Link: https://lore.kernel.org/r/20260414092921.1067735-2-wenswang@yeah.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for MPS mp2985 controller.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Wensheng Wang <wenswang@yeah.net>
Link: https://lore.kernel.org/r/20260414092921.1067735-1-wenswang@yeah.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Document xSPI controller found on the Renesas RZ/T2H and RZ/N2H SoCs.
The xSPI IP on these SoCs is identical to that found on the RZ/G3E SoC.
The RZ/G3E HW manual (Rev.1.15) references bridge channel 1 and its
bits, however the hardware actually supports only a single bridge
channel (channel 0), matching the RZ/T2H design. The references to
channel 1 and its configuration bits will be corrected in a future
revision of the HW manual.
Update clock/reset constraints to handle the SoC differences.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260515115202.1515577-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Currently, rcu_normal_wake_from_gp is only enabled by default
on small systems(<= 16 CPUs) or when a user explicitly set it
enabled.
Introduce an adaptive latching mechanism:
* Track the number of in-flight synchronize_rcu() requests
using a new rcu_sr_normal_count counter;
* If the count reaches/exceeds RCU_SR_NORMAL_LATCH_THR(64),
it sets the rcu_sr_normal_latched, reverting new requests
onto the scaled wait_rcu_gp() path;
* The latch is cleared only when the pending requests are fully
drained(nr == 0);
* Enables rcu_normal_wake_from_gp by default for all systems,
relying on this dynamic throttling instead of static CPU
limits.
Testing(synthetic flood workload):
* Kernel version: 6.19.0-rc6
* Number of CPUs: 1536
* 60K concurrent synchronize_rcu() calls
Perf(cycles, system-wide):
total cycles: 932020263832
rcu_sr_normal_add_req(): 2650282811 cycles(~0.28%)
Perf report excerpt:
0.01% 0.01% sync_test/... [k] rcu_sr_normal_add_req
Measured overhead of rcu_sr_normal_add_req() remained ~0.28%
of total CPU cycles in this synthetic stress test.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Tested-by: Samir M <samir@linux.ibm.com>
Suggested-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
Extend the binding to cover details specific to the Tenstorrent RISC-V
IOMMU. In particular, a second register range is added which contains
M-privileged registers, e.g., PMAs and PMPs.
The RISC-V spec S-privileged registers remain in the first register
range and are compatible with "riscv,iommu" so the Linux driver does not
notice any difference, but the binding will be used by OpenSBI and
potentially other M-mode software.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[fustini: fix dt_binding_check errors]
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
When running a GICv5-based guest, the PMU must use PPI 23. This,
however, must be communicated via the
KVM_ARM_VCPU_PMU_V3_CTRL->KVM_ARM_VCPU_PMU_V3_IRQ ioctl as a full
GICv5-style Interrupt ID. That is, 0x20000017. Optionally, the whole
ioctl can be skipped for GICv5.
This was previously not clearly documented, so bump the documentation
accordingly.
Fixes: 7c31c06e2d2d ("KVM: arm64: gic-v5: Mandate architected PPI for PMU emulation on GICv5")
Link: https://sashiko.dev/#/patchset/20260319154937.3619520-1-sascha.bischoff%40arm.com
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-17-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Fix two typos in the VGICv5 documentation.
Fixes: d51c978b7d3e ("KVM: arm64: gic-v5: Communicate userspace-driveable PPIs via a UAPI")
Fixes: eb3c4d2c9a4d ("Documentation: KVM: Introduce documentation for VGICv5")
Link: https://sashiko.dev/#/patchset/20260319154937.3619520-1-sascha.bischoff%40arm.com
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20260520091949.542365-16-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Fix multiple documentation build warnings.
Improve punctuation and formatting of the rendered output.
Documentation/arch/arm/zte/zx297520v3.rst:66: WARNING: Title underline too short.
3. Building for built-in U-Boot
--------------------------- [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:90: WARNING: Enumerated list ends without a blank line; unexpected unindent. [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:116: WARNING: Inline literal start-string without end-string. [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:137: ERROR: Unexpected indentation. [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:138: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:164: WARNING: Inline literal start-string without end-string. [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:164: WARNING: Inline interpreted text or phrase reference start-string without end-string. [docutils]
Documentation/arch/arm/zte/zx297520v3.rst:7: WARNING: Document or section may not begin with a transition. [docutils]
Fixes: 220ae5d36dba ("ARM: zte: Add zx297520v3 platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Stefan Dösinger <stefandoesinger@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
|
|
The applicom driver supports PCI Profibus cards from Applicom, later
acquired by Molex. It has severe coding style issues and has attracted
a number of bug and security fixes over the years, despite the fact
that no one appears to be using it. It was broken from at least the
beginning of Git history (Linux 2.6.12-rc2 in April 2005) until October
2008, when a fatal bug was fixed in commit bc20589bf1c6 ("applicom.c:
fix apparently-broken code in do_ac_read()"). In the commit message,
the author commented that no one they knew was able to test the change.
Since then, there have been no commits that indicate the driver is
being used. Later PCI and PCI-Express Applicom Profibus cards only
officially support Windows [1], and even the PCI-Express cards have
been discontinued [2]. Given all these factors, remove the driver to
reduce future maintenance workload.
[1] https://www.sarcitalia.it/file_upload/prodotti//PCIE1500S7_PFB_987651-3769_0876250001505823933.pdf
[2] https://us.rs-online.com/product/molex-woodhead-brad/112011-5026/70631928/
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260503035824.24078-1-enelsonmoore@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The dtlk driver supports the RC Systems DoubleTalk PC ISA speech
synthesizer card. It has severe coding style issues and has only
received tree-wide fixes and drive-by cleanups in the entire Git
history (since Linux 2.6.12-rc2). The same hardware is supported by
drivers/accessibility/speakup for screen reader use, but that
implementation does not share any code with this driver. Given all of
these factors, it is likely the driver is entirely unused. Remove it to
reduce future maintenance workload.
Note: The removed maintainer is already listed in CREDITS.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260502043341.34324-1-enelsonmoore@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
QUP1_SE4 uses GPIO36 and GPIO37 for two selectable lane pairs. The
previous split added one function name per lane. Since these are usually
configured in pairs in devicetree, it makes more sense to have them
grouped.
So replace the per-lane qup1_se4_l[0-3] names with names for the two
selectable pairs, qup1_se4_01 and qup1_se4_23.
Fixes: 1bd5c56253c5 ("dt-bindings: pinctrl: qcom,eliza-tlmm: Split QUP1_SE4 lanes")
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
