| Age | Commit message (Collapse) | Author |
|---|
|
unbinding
During driver removal, the following warning can appear:
WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc
...
Call trace:
__device_links_no_driver+0xcc/0xfc (P)
device_links_driver_cleanup+0xa8/0xf0
device_release_driver_internal+0x208/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
driver_detach+0xa0/0x12c
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
pci_unregister_driver+0x20/0x9c
lan966x_pci_driver_exit+0x18/0xa90 [lan966x_pci]
This warning is triggered when a consumer is removed because the links
status of its supplier is not DL_DEV_DRIVER_BOUND and the link flag
DL_FLAG_SYNC_STATE_ONLY is not set.
The topology in terms of consumers/suppliers used was the following
(consumer ---> supplier):
i2c -----------> OIC ----> PCI device
| ^
| |
+---> pinctrl ---+
When the PCI device is removed, the OIC (interrupt controller) has to be
removed. In order to remove the OIC, pinctrl and i2c need to be removed
and to remove pinctrl, i2c need to be removed. The removal order is:
1) i2c
2) pinctrl
3) OIC
4) PCI device
In details, the removal sequence is the following (with 0000:01:00.0 the
PCI device):
driver_detach: call device_release_driver_internal(0000:01:00.0)...
device_links_busy(0000:01:00.0):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(0000:01:00.0):
0000:01:00.0--oic link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(oic)...
device_links_busy(oic):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(oic):
oic--pinctrl link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(pinctrl)...
device_links_busy(pinctrl):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(pinctrl):
pinctrl--i2c link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(i2c)...
device_links_busy(i2c): links->status = DL_DEV_UNBINDING
__device_links_no_driver(i2c)...
pinctrl--i2c link->status is DL_STATE_SUPPLIER_UNBIND
oic--i2c link->status is DL_STATE_ACTIVE
oic--i2c link->supplier->links.status is DL_DEV_UNBINDING
The warning is triggered by the i2c removal because the OIC (supplier)
links status is not DL_DEV_DRIVER_BOUND. Its links status is indeed set
to DL_DEV_UNBINDING.
It is perfectly legit to have the links status set to DL_DEV_UNBINDING
in that case. Indeed we had started to unbind the OIC which triggered
the consumer unbinding and didn't finish yet when the i2c is unbound.
Avoid the warning when the supplier links status is set to
DL_DEV_UNBINDING and thus support this removal sequence without any
warnings.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://patch.msgid.link/20260511155755.34428-4-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When an overlay is applied, if the target device has already probed
successfully and bound to a device, then some of the fw_devlink logic
that ran when the device was probed needs to be rerun. This allows newly
created dangling consumers of the overlayed device tree nodes to be
moved to become consumers of the target device.
[Herve: Add the call to driver_deferred_probe_trigger()]
[Herve: Use fwnode_test_flag() to test fwnode flags value]
Fixes: 1a50d9403fb9 ("treewide: Fix probing of devices in DT overlays")
Reported-by: Herve Codina <herve.codina@bootlin.com>
Closes: https://lore.kernel.org/lkml/CAMuHMdXEnSD4rRJ-o90x4OprUacN_rJgyo8x6=9F9rZ+-KzjOg@mail.gmail.com/
Closes: https://lore.kernel.org/all/20240221095137.616d2aaa@bootlin.com/
Closes: https://lore.kernel.org/lkml/20240312151835.29ef62a0@bootlin.com/
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/lkml/20240411235623.1260061-3-saravanak@google.com/
[Herve: Rebase on top of recent kernel]
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Kalle Niemi <kaleposti@gmail.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260511155755.34428-3-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The deferred_probe_timeout_work may be permanently and unexpectedly
canceled when deferred_probe_extend_timeout() executes concurrently.
Starting with deferred_probe_timeout_work pending, the problem can
occur after the following sequence:
CPU0 CPU1
deferred_probe_extend_timeout
-> cancel_delayed_work() => true
deferred_probe_extend_timeout
-> cancel_delayed_work()
-> __cancel_work()
-> try_grab_pending()
-> schedule_delayed_work()
-> queue_delayed_work_on()
(Since the pending bit is grabbed,
it just returns without queuing)
-> set_work_pool_and_clear_pending()
(This __cancel_work() returns false and
the work will never be queued again)
The root cause is that the WORK_STRUCT_PENDING_BIT of the work_struct
is set temporarily in __cancel_work() (via try_grab_pending()). This
transient state prevents the work_struct from being successfully queued
by another CPU.
To fix this, replace the original non-atomic cancel and schedule
mechanism with mod_delayed_work(). This ensures the modification is
handled atomically and guarantees that the work is not lost.
Fixes: 2b28a1a84a0e ("driver core: Extend deferred probe timeout on driver registration")
Signed-off-by: Zhang Yuwei <zhangyuwei20@huawei.com>
Link: https://patch.msgid.link/20260410024448.387231-1-zhangyuwei20@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When called with FWNODE_GRAPH_ENDPOINT_NEXT, the function walks every
endpoint under the requested port and, for any endpoint whose ID is
greater than or equal to the requested one, may store a fwnode
reference in best_ep via fwnode_handle_get(). If a later iteration
finds an exact-ID match, the function returns that endpoint directly
without dropping the reference held by best_ep, leaking it.
Drop the saved candidate before returning the exact-match endpoint.
This affects callers that use FWNODE_GRAPH_ENDPOINT_NEXT to ask for
the next endpoint with ID >= the requested one (used by a number of
media drivers, e.g. imx7/8, sun6i CSI, omap3isp, xilinx-csi2,
stm32-csi). Each leak retains a fwnode reference until reboot/unbind.
Fixes: 0fcc2bdc8aff ("device property: Add fwnode_graph_get_endpoint_by_id()")
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Link: https://patch.msgid.link/20260514171455.27271-1-sozdayvek@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
driver_remove_groups
Constify the groups array argument in driver_add_groups and
driver_remove_groups. This allows to pass constant arrays as
arguments.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/21a1e5f1-c6a0-4f6f-aa86-1e6abd25f9c6@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Kconfig symbol DEV_COREDUMP is of type bool, therefore devcoredump
can't be built as a module and the exit code is a no-op.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/39a3821b-03d6-4ff0-97b7-82411a76d39a@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
i2c_smbus_write_word_data() expects a plain u16, but cpu_to_le16()
returns __le16 (a sparse-restricted endian type), causing:
drivers/base/regmap/regmap-i2c.c:340: sparse: incorrect type in
argument 3 (different base types)
expected unsigned short [usertype] value
got restricted __le16 [usertype]
SMBus already defines byte ordering internally, so cpu_to_le16() is
wrong here. Replace it with a plain (u16) cast.
Fixes: bad4bd28abf4 ("regmap-i2c: add SMBus byte/word reg16 bus for adapters lacking I2C_FUNC_I2C")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605161621.mY5zFh4D-lkp@intel.com/
Signed-off-by: Nishanth Sampath Kumar <nissampa@cisco.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge the cache aware balancer topic branch.
# Conflicts:
# kernel/sched/topology.c
|
|
Cache aware scheduling needs to know the LLC size that a process
can use, so as to avoid memory-intensive tasks from being
over-aggregated on a single LLC.
Introduce a preparation patch to add get_effective_llc_bytes() to
get the LLC size that a CPU can use. The function can be further
enhanced by subtracting the LLC cache ways reserved by resctrl
(CAT in Intel RDT, etc).
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Tingyin Duan <tingyin.duan@gmail.com>
Link: https://patch.msgid.link/37afee09ff608034da0ce149e72d33b6f4698edf.1778703694.git.tim.c.chen@linux.intel.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers
FSL SOC Changes for 7.1
Freescale QUICC Engine:
- Add missing cleanup on device removal and switch to irq_domain_create_linear()
in interrupt controller for IO Ports
- Panic on ioremap() failure in qe_reset()
Freescale Management Complex:
- Move fsl-mc over to device MSI infrastructure
- Wait for the MC firmware to complete its boot
Freescale Hypervisor:
- Fix header kernel-doc warnings
* tag 'soc_fsl-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux:
bus: fsl-mc: wait for the MC firmware to complete its boot
soc: fsl: qe: panic on ioremap() failure in qe_reset()
soc: fsl: qe_ports_ic: switch to irq_domain_create_linear()
soc: fsl: qe_ports_ic: Add missing cleanup on device removal
virt: fsl_hypervisor: fix header kernel-doc warnings
platform-msi: Remove stale comment
fsl-mc: Remove legacy MSI implementation
fsl-mc: Switch over to per-device platform MSI
irqchip/gic-v3-its: Add fsl_mc device plumbing to the msi-parent handling
fsl-mc: Add minimal infrastructure to use platform MSI
fsl-mc: Remove MSI domain propagation to sub-devices
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Iterating through wakeup sources via sysfs or debugfs can be inefficient
or restricted. Introduce BPF kfuncs to allow high-performance and safe
in-kernel traversal of the wakeup_sources list. There is at least a 30x
speedup for walking 150 wakeup sources and all their attributes.
The new kfuncs include:
- bpf_wakeup_sources_get_head() to obtain the list head.
- bpf_wakeup_sources_read_lock/unlock() to manage the SRCU lock.
For verifier safety, the underlying SRCU index is wrapped in an opaque
'struct bpf_ws_lock' pointer. This enables the use of KF_ACQUIRE and
KF_RELEASE flags, allowing the BPF verifier to strictly enforce paired
lock/unlock cycles and prevent resource leaks.
Signed-off-by: Samuel Wu <wusamuel@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20260511174559.659782-2-wusamuel@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block
via find_memory_block_by_id(), which acquires a reference to the memory
block device.
Both helpers use the returned memory block without dropping that
reference, leaking the device reference on each successful lookup. Drop
the reference after updating nr_hwpoison.
Link: https://lore.kernel.org/20260428085219.1316047-3-songmuchun@bytedance.com
Fixes: 5033091de814 ("mm/hwpoison: introduce per-memory_block hwpoison counter")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Huang, Ying" <huang.ying.caritas@gmail.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If we pass a software node to a newly created device using struct
platform_device_info, it will not be removed when the device is
released. This may happen when a module creating the device is removed
or on failure in platform_device_add().
When we try to reuse that software node in a subsequent call to
platform_device_register_full(), it will fail with -EBUSY.
Provide a wrapper around the existing platform_device_release() that
additionally calls device_remove_software_node() and use it to replace
the former if we end up adding a software node.
While at it: check all three possible situations in which two software
nodes for a single platform device can be created/assigned in
platform_device_register_full() and bail-out early.
Fixes: 0fc434bc2c45 ("driver core: platform: allow attaching software nodes when creating devices")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260513-swnode-remove-on-dev-unreg-v6-1-f9c58939df27@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Danilo Krummrich <dakr@kernel.org> says:
When drvdata() was introduced in commit 6f61a2637abe ("rust: device: introduce
Device::drvdata()"), its commit message already noted that a direct accessor to
the driver's bus device private data is not commonly required -- bus callbacks
provide access through &self, and other entry points (IRQs, workqueues, IOCTLs,
etc.) carry their own private data.
The sole motivation for drvdata() was inter-driver interaction, e.g. a parent
driver deriving its bus device private data from the child driver via the
auxiliary bus.
However, drvdata() exposes the driver's bus device private data beyond the
driver's own scope. This creates ordering constraints -- drvdata may not be set
yet when the first caller of drvdata() can appear -- and forces the driver's bus
device private data to outlive all registrations that access it; a requirement
that causes unnecessary complications.
Private data should be private to the entity that issues it; bus device private
data belongs to bus callbacks, class device private data to class callbacks, IRQ
private data to the IRQ handler, etc.
This series replaces drvdata() with a dedicated registration_data pointer on
struct auxiliary_device. The parent stores its private data explicitly during
registration; the data is private to the registration and lives as long as the
Registration object.
On teardown, Registration::drop() first triggers auxiliary_device_delete()
(unbinding the child), then frees the registration data. Ordering constraints
are structural -- the child's lifecycle is scoped to the registration by
construction, not by convention.
With no remaining use case for drvdata(), drvdata(), match_type_id(),
set_type_id() and struct driver_type are removed.
This is a prerequisite for [1], which builds on the removal of drvdata() to
enable Higher-Ranked Lifetime Types (HRT) for Rust device drivers.
[1] https://lore.kernel.org/driver-core/20260427221155.2144848-1-dakr@kernel.org/
Link: https://patch.msgid.link/20260505152400.3905096-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
When drvdata() was introduced in commit 6f61a2637abe ("rust: device:
introduce Device::drvdata()"), its commit message already noted that a
direct accessor to the driver's bus device private data is not commonly
required -- bus callbacks provide access through &self, and other entry
points (IRQs, workqueues, IOCTLs, etc.) carry their own private data.
The sole motivation for drvdata() was inter-driver interaction -- an
auxiliary driver deriving the parent's bus device private data from the
parent device.
However, drvdata() exposes the driver's bus device private data beyond
the driver's own scope. This creates ordering constraints; for instance
drvdata may not be set yet when the first caller of drvdata() can
appear. It also forces the driver's bus device private data to outlive
all registrations that access it, which causes unnecessary
complications.
Private data should be private to the entity that issues it, i.e. bus
device private data belongs to bus callbacks, class device private data
to class callbacks, IRQ private data to the IRQ handler, etc.
With registration-private data now available through the auxiliary bus,
there is no remaining user of drvdata(), thus remove it.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260505152400.3905096-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Make the code more readable by avoid constant dereferencing of the
swnode's kobject when managing references. Provide wrappers that take
struct swnode * as argument and make them hide that logic.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260427131825.15793-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
firmware_upload_register()
-> fw_create_instance()
-> device_initialize()
After fw_create_instance() succeeds, the lifetime of the embedded struct
device is expected to be managed through the device core reference
counting, since fw_create_instance() has already called
device_initialize().
In firmware_upload_register(), if alloc_lookup_fw_priv() fails after
fw_create_instance() succeeds, the code reaches free_fw_sysfs and frees
fw_sysfs directly instead of releasing the device reference with
put_device(). This may leave the reference count of the embedded struct
device unbalanced, resulting in a refcount leak.
The issue was identified by a static analysis tool I developed and
confirmed by manual review. Fix this by using put_device(fw_dev) in the
failure path and letting fw_dev_release() handle the final cleanup,
instead of freeing the instance directly from the error path.
Fixes: 97730bbb242c ("firmware_loader: Add firmware-upload support")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260505091231.607089-1-lgs201920130244@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
request_firmware_nowait() keeps the callback module pinned and holds
a device reference until the firmware work completes.
Callers still have no way to cancel or synchronize the queued callback
before tearing down their driver-private state.
Track scheduled async firmware work in an internal list and add
request_firmware_nowait_cancel(). The helper cancels work matching the
device, callback context and callback function. It cancels work that has
not started yet and waits for an already-running callback to return. If
the request has already completed, it is a no-op.
Keep the existing request_firmware_nowait() lifetime model manual. A
devres-managed variant can be layered on top separately if needed.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260505-alsa-hda-tas2781-fw-callback-teardown-v4-1-e7c4bf930dc8@gmail.com
|
|
Driver core expects devices to be dynamically allocated and will, for
example, complain loudly if a device that lacks a release function is
ever freed.
Use root_device_register() to allocate and register the root device
instead of open coding using a static device.
Note that this also fixes a reference leak in case device_register()
fails which may be flagged by static checkers.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: William Breathitt Gray <wbg@kernel.org>
Link: https://patch.msgid.link/20260424102400.2615677-1-johan@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Trying to register a device on a bus which has not yet been registered
used to trigger a NULL-pointer dereference, but since the const bus
structure rework registration instead succeeds without the device being
added to the bus.
This specifically means that the device will never bind to a driver and
that the bus sysfs attributes are not created (i.e. as if the device had
no bus).
Reject devices with unregistered buses to catch any callers that get
the ordering wrong and to handle bus registration failures more
gracefully.
Fixes: 5221b82d46f2 ("driver core: bus: bus_add/probe/remove_device() cleanups")
Cc: stable@vger.kernel.org # 6.3
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260430091718.230228-1-johan@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Clean up the faux bus init error handling by naming the labels after
what they do (rather than from where they are jumped to) and separating
the success path more clearly by returning explicit zero.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260424153127.2647405-3-johan@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
A recent change made the faux bus root device be allocated dynamically
but failed to provide a release function to free the memory when the
last reference is dropped (on theoretical failure to register the device
or bus).
Fix this by using root_device_register() instead of open coding.
Also add the missing sanity check when registering faux devices to avoid
use-after-free if the bus failed to register (which would previously
have triggered a bunch of use-after-free warnings).
Fixes: 61b76d07d2b4 ("driver core: faux: stop using static struct device")
Cc: stable@vger.kernel.org # 7.0
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260424153127.2647405-2-johan@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
All callers of dev_has_sync_state() are in drivers/base/ and any attempt
to use it outside of driver-core should require good justification, so
there is no need to have it defined in include/linux/device.h.
Thus, move it to drivers/base/base.h.
Suggested-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://lore.kernel.org/driver-core/CAJZ5v0jkm9K9=-U_51FMsyxN2msdouRnz4sEjmxG0Btd6Hmw0w@mail.gmail.com/
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260420234153.2898532-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In C, bitfields are not necessarily safe to modify from multiple
threads without locking. Switch "offline" and "offline_disabled" over
to the "flags" field so modifications are safe.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260406162231.v5.9.I897d478b4a9361d79cd5073207c1062fd4d0d0e4@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In C, bitfields are not necessarily safe to modify from multiple
threads without locking. Switch "of_node_reused" over to the "flags"
field so modifications are safe.
Cc: Johan Hovold <johan@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # PCI_PWRCTRL
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260406162231.v5.8.I806b8636cd3724f6cd1f5e199318ab8694472d90@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260424112425.32129-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In C, bitfields are not necessarily safe to modify from multiple
threads without locking. Switch "dma_coherent" over to the "flags"
field so modifications are safe.
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260406162231.v5.7.If839f6dde98979fce177f70c6c74689a1904ee76@changeid
[ Since all DEV_FLAG_DMA_COHERENT accessors are exposed unconditionally,
also drop the CONFIG guards around dev_assign_dma_coherent() in
device_initialize() to ensure a correct default value. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In C, bitfields are not necessarily safe to modify from multiple
threads without locking. Switch "state_synced" over to the "flags"
field so modifications are safe.
Cc: Saravana Kannan <saravanak@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260406162231.v5.6.Idb4818e1159fef104c7756bfd6e7ba8f374bebcd@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In C, bitfields are not necessarily safe to modify from multiple
threads without locking. Switch "can_match" over to the "flags" field
so modifications are safe.
Cc: Saravana Kannan <saravanak@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260406162231.v5.2.I54b3ae6311ff34ad30227659d91bb109911a4aea@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"There's couple of patches here that came in since my pull request:
- What is effectively a quirk for shoehorning support for a wider
range of I2C regmaps on weirdly restricted SMBus controllers
- One minor fix for a memory leak on in error handling in the dummy
driver used by the KUnit tests"
* tag 'regmap-fix-v7.1-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: ram: fix memory leaks in __regmap_init_ram() on error
regmap-i2c: add SMBus byte/word reg16 bus for adapters lacking I2C_FUNC_I2C
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are the rest of small updates for 7.1-rc1. All small fixes mostly
for device-specific issues or regressions.
Core:
- Fix a potential data race in fasync handling
USB-audio:
- New device support: Line6 POD HD PRO, NexiGo N930W webcam
- Fixes for Audio Advantage Micro II SPDIF switch and E-MU sample
rates
- Limit UAC2 rate parsing to prevent potential overflows
HD-Audio:
- Device-specific quirks for HP, Acer, and Honor laptops
- Fix for TAS2781 SPI device abnormal sound
- Move Intel firmware loading into probe work to avoid stalling
ASoC:
- New support for TI TAS5832
- Fixes for SoundWire SDCA/DisCo boolean parsing
- Driver-specific fixes for Intel SOF, ES8311, RT1320, and PXA2xx
Misc:
- Fixes for resource leaks and data races in 6fire, caiaq, als4000,
and pcmtest drivers"
* tag 'sound-fix-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (41 commits)
Revert "ALSA: pcmtest: fix reference leak on failed device registration"
ASoC: tas2781: Add tas5832 support
ASoC: dt-bindings: ti,tas2781: Add TAS5832 support
ALSA: usb-audio: Fix Audio Advantage Micro II SPDIF switch
ALSA: usb-audio: Avoid false E-MU sample-rate notifications
ASoC: sdw_utils: cs42l43: allow spk component names to be combined
ASoC: qcom: x1e80100: limit speaker volumes
ALSA: hda/realtek - Add mute LED support for HP Victus 15-fa2xxx
ALSA: pcmtest: Fix resource leaks in module init error paths
ALSA: usb-audio/line6: Add support for POD HD PRO
ALSA: hda/realtek: Add LED fixup for HP EliteBook 6 G2a Laptops
ASoC: SDCA: Fix reading of mipi-sdca-control-deferrable
regmap: sdw-mbq: Allow defers on undeferrable controls
Revert "ALSA: usb-audio: Add quirk for SmartlinkTechnology M01"
ALSA: als4000: Fix capture trigger chip->mode race
ALSA: core: Fix potential data race at fasync handling
ALSA: hda/tas2781: Fix sound abnormal issue on some SPI device
ALSA: hda/realtek: add quirk for Acer Nitro 16 AN16-41
ALSA: caiaq: Fix control_put() result and cache rollback
ALSA: pcmtest: fix reference leak on failed device registration
...
|
|
It is a fairly common DisCo issue to have the deferrability of controls
marked incorrectly and Windows seems very permissive in this regard. As
there isn't really any down side to trying a defer even if the control
isn't deferrable, allow this but add a warning message.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260413124621.1345315-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Prevent a device from being probed before device_add() has finished
initializing it; gate probe with a "ready_to_probe" device flag to
avoid races with concurrent driver_register() calls
- Fix a kernel-doc warning for DEV_FLAG_COUNT introduced by the above
- Return -ENOTCONN from software_node_get_reference_args() when a
referenced software node is known but not yet registered, allowing
callers to defer probe
- In sysfs_group_attrs_change_owner(), also check is_visible_const();
missed when the const variant was introduced
* tag 'driver-core-7.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
driver core: Add kernel-doc for DEV_FLAG_COUNT enum value
sysfs: attribute_group: Respect is_visible_const() when changing owner
software node: return -ENOTCONN when referenced swnode is not registered yet
driver core: Don't let a device probe until it's ready
|
|
Two allocations in __regmap_init_ram() are not cleaned up on failure.
If the kzalloc_objs() for data->written fails, data->read is returned
with no way for the caller to free it.
If __regmap_init() fails, neither data->read nor data->written is freed
because its error paths do not call bus->free_context() (which is
regmap_ram_free_context() here). Only regmap_exit() does, and that is
never reached on an init failure.
Free the allocated arrays before returning any error.
Fixes: f6352424e37e ("regmap: Add RAM backed register map")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://patch.msgid.link/20260416235630.78408-1-dbgh9129@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This has been quite a busy release for regmap, the user visible
changes are quite minor but there's some quite good work on internal
code improvements:
- Cleanup helper for __free()ing regmap_fields
- Support non-devm I3C regmaps
- A bunch of cleanup work, mostly from Andy Shevchenko
- Fix for bootstrapping issues with hardware initialised regmaps,
which was the main inspiration for some of the cleanups"
* tag 'regmap-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: i3c: Add non-devm regmap_init_i3c() helper
regmap: debugfs: fix race condition in dummy name allocation
regmap: Synchronize cache for the page selector
regmap: Simplify devres handling
regcache: Move HW readback after cache initialisation
regcache: Allocate and free reg_defaults on the same level
regcache: Move count check and cache_bypass assignment to the caller
regcache: Factor out regcache_hw_exit() helper
regcache: Amend printf() specifiers when printing registers
regcache: Define iterator inside for-loop and align their types
regmap: define cleanup helper for regmap_field
regmap: sort header includes
regcache: Split regcache_count_cacheable_registers() helper
regcache: Remove duplicate check in regcache_hw_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- new DRM RAS infrastructure using netlink
- amdgpu: enable DC on CIK APUs, and more IP enablement, and more
user queue work
- xe: purgeable BO support, and new hw enablement
- dma-buf : add revocable operations
Full summary:
mm:
- two-pass MMU interval notifiers
- add gpu active/reclaim per-node stat counters
math:
- provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI
- implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST()
rust:
- shared tag with driver-core: register macro and io infra
- core: rework DMA coherent API
- core: add interop::list to interop with C linked lists
- core: add more num::Bounded operations
- core: enable generic_arg_infer and add EMSGSIZE
- workqueue: add ARef<T> support for work and delayed work
- add GPU buddy allocator abstraction
- add DRM shmem GEM helper abstraction
- allow drm:::Device to dispatch work and delayed work items
to driver private data
- add dma_resv_lock helper and raw accessors
core:
- introduce DRM RAS infrastructure over netlink
- add connector panel_type property
- fourcc: add ARM interleaved 64k modifier
- colorop: add destroy helper
- suballoc: split into alloc and init helpers
- mode: provide DRM_ARGB_GET*() macros for reading color components
edid:
- provide drm_output_color_Format
dma-buf:
- provide revoke mechanism for shared buffers
- rename move_notify to invalidate_mappings
- always enable move_notify
- protect dma_fence_ops with RCU and improve locking
- clean pages with helpers
atomic:
- allocate drm_private_state via callback
- helper: use system_percpu_wq
buddy:
- make buddy allocator available to gpu level
- add kernel-doc for buddy allocator
- improve aligned allocation
ttm:
- fix fence signalling
- improve tests and docs
- improve handling of gfp_retry_mayfail
- use per-node stat counters to track memory allocations
- port pool to use list_lru
- drop NUMA specific pools
- make pool shrinker numa aware
- track allocated pages per numa node
coreboot:
- cleanup coreboot framebuffer support
sched:
- fix race condition in drm_sched_fini
pagemap:
- enable THP support
- pass pagemap_addr by reference
gem-shmem:
- Track page accessed/dirty status across mmap/vmap
gpusvm:
- reenable device to device migration
- fix unbalanced unclock
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve
others
- fsl-ldb: Fix visual artifacts plus related DT property
'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus
DT bindings
- anx7625: Fix USB Type-C handling
- cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check
- Support Lontium LT8713SX DP MST bridge plus DT bindings
- analogix_dp: Use DP helpers for link training
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN
N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- panel-edp: Fix timings for BOE NV140WUM-N64
- ilitek-ili9882t: Allow GPIO calls to sleep
- jadard: Support TAIGUAN XTI05101-01A
- lxd: Support LXD M9189A plus DT bindings
- mantix: Fix pixel clock; Clean up
- motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings
- novatek: Support Novatek/Tianma NT37700F plus DT bindings
- simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip
PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3"
- novatek-nt36672a: Use mipi_dsi_*_multi() functions
- panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW
MNF307QS3-2
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support
backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
amdgpu:
- enable DC by default on CIK APUs
- userq fence ioctl param size fixes
- set panel_type to OLED for eDP
- refactor DC i2c code
- FAMS2 update
- rework ttm handling to allow multiple engines
- DC DCE 6.x cleanup
- DC support for NUTMEG/TRAVIS DP bridge
- DCN 4.2 support
- GC12 idle power fix for compute
- use struct drm_edid in non-DC code
- enable NV12/P010 support on primary planes
- support newer IP discovery tables
- VCN/JPEG 5.0.2 support
- GC/MES 12.1 updates
- USERQ fixes
- add DC idle state manager
- eDP DSC seamless boot
amdkfd:
- GC 12.1 updates
- non 4K page fixes
xe:
- basic Xe3p_LPG and NVL-P enabling patches
- allow VM_BIND decompress support
- add purgeable buffer object support
- add xe_vm_get_property_ioctl
- restrict multi-lrc to VCS/VECS engines
- allow disabling VM overcommit in fault mode
- dGPU memory optimizations
- Workaround cleanups and simplification
- Allow VFs VRAM quote changes using sysfs
- convert GT stats to per-cpu counters
- pagefault refactors
- enable multi-queue on xe3p_xpc
- disable DCC on PTL
- make MMIO communication more robust
- disable D3Cold for BMG on specific platforms
- vfio: improve FLR sync for Xe VFIO
i915/display:
- C10/C20/LT PHY PLL divider verification
- use trans push mechanism to generate PSR frame change on LNL+
- refactor DP DSC slice config
- VGA decode refactoring
- refactor DPT, gen2-4 overlay, masked field register macro helpers
- refactor stolen memory allocation decisions
- prepare for UHBR DP tunnels
- refactor LT PHY PLL to use DPLL framework
- implement register polling/waiting in display code
- add shared stepping header between i915 and display
i915:
- fix potential overflow of shmem scatterlist length
nouveau:
- provide Z cull info to userspace
- initial GA100 support
- shutdown on PCI device shutdown
nova-core:
- harden GSP command queue
- add support for large RPCs
- simplify GSP sequencer and message handling
- refactor falcon firmware handling
- convert to new register macro
- conver to new DMA coherent API
- use checked arithmetic
- add debugfs support for gsp-rm log buffers
- fix aux device registration for multi-GPU
msm:
- CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
- Core:
- Switched to of_get_available_child_by_name()
- DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
- DP:
- Removed debug prints looking into PHY internals
- DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
- GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- HDMI:
- Fixed infoframes programming
- MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
panthor:
- add tracepoints for power and IRQs
- fix fence handling
- extend timestamp query with flags
- support various sources for timestamp queries
tyr:
- fix names and model/versions
rockchip:
- vop2: use drm logging function
- rk3576 displayport support
- support CRTC background color
atmel-hlcdc:
- support sana5d65 LCD controller
tilcdc:
- use DT bindings schema
- use managed DRM interfaces
- support DRM_BRIDGE_ATTACH_NO_CONNECTOR
verisilicon:
- support DC8200 + DT bindings
virtgpu:
- support PRIME import with 3D enabled
komeda:
- fix integer overflow in AFBC checks
mcde:
- improve bridge handling
gma500:
- use drm client buffer for fbdev framebuffer
amdxdna:
- add sensors ioctls
- provide NPU power estimate
- support column utilization sensor
- allow forcing DMA through IOMMU IOVA
- support per-BO mem usage queries
- refactor GEM implementation
ivpu:
- update boot API to v3.29.4
- limit per-user number of doorbells/contexts
- perform engine reset on TDR error
loongson:
- replace custom code with drm_gem_ttm_dumb_map_offset()
imx:
- support planes behind the primary plane
- fix bus-format selection
vkms:
- support CRTC background color
v3d:
- improve handling of struct v3d_stats
komeda:
- support Arm China Linlon D6 plus DT bindings
imagination:
- improve power-off sequence
- support context-reset notification from firmware
mediatek:
- mtk_dsi: enable hs clock during pre-enable
- Remove all conflicting aperture devices during probe
- Add support for mt8167 display blocks"
* tag 'drm-next-2026-04-15' of https://gitlab.freedesktop.org/drm/kernel: (1735 commits)
drm/ttm/tests: Remove checks from ttm_pool_free_no_dma_alloc
drm/ttm/tests: fix lru_count ASSERT
drm/vram: remove DRM_VRAM_MM_FILE_OPERATIONS from docs
drm/fb-helper: Fix a locking bug in an error path
dma-fence: correct kernel-doc function parameter @flags
ttm/pool: track allocated_pages per numa node.
ttm/pool: make pool shrinker NUMA aware (v2)
ttm/pool: drop numa specific pools
ttm/pool: port to list_lru. (v2)
drm/ttm: use gpu mm stats to track gpu memory allocations. (v4)
mm: add gpu active/reclaim per-node stat counters (v2)
gpu: nova-core: fix missing colon in SEC2 boot debug message
gpu: nova-core: vbios: use from_le_bytes() for PCI ROM header parsing
gpu: nova-core: bitfield: fix broken Default implementation
gpu: nova-core: falcon: pad firmware DMA object size to required block alignment
gpu: nova-core: gsp: fix undefined behavior in command queue code
drm/shmem_helper: Make sure PMD entries get the writeable upgrade
accel/ivpu: Trigger recovery on TDR with OS scheduling
drm/msm: Use of_get_available_child_by_name()
dt-bindings: display/msm: move DSI PHY bindings to phy/ subdir
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These include thermal core fixes and simplifications, driver fixes and
new hardware support (SDM670, Eliza SoC), new driver features (hwmon
support in imx91, DDR data rate on Nova Lake in int340x), and a
handful of cleanups:
- Fix thermal core issues related to thermal zone removal and
registration errors that may lead to a use-after-free or a memory
leak in some cases (Rafael Wysocki)
- Drop a redundant check from thermal_zone_device_update(), adjust
thermal workqueue allocation flags, and switch over thermal_class
allocation to static (Rafael Wysocki)
- Relocate the suspend and resume of thermal zones closer to the
suspend and resume of devices, respectively (Rafael Wysocki)
- Remove a pointless variable used in the thermal core when
registering a cooling device (Daniel Lezcano)
- Replace sprintf() in thermal_bind_cdev_to_trip() and use
str_enabled_disabled() helper in mode_show() (Thorsten Blum)
- Replace cpumask_weight() in intel_hfi_offline() with
cpumask_empty() which is generally more efficient (Yury Norov)
- Add support for reading DDR data rate from PCI config space on Nova
Lake platforms to the int340x thermal driver (Srinivas Pandruvada)
- Add an OF node address to output message to make sensor names more
distinguishable (Alexander Stein)
- Add hwmon support for the i.MX97 thermal sensor (Alexander Stein)
- Clamp correctly the results when doing value/temperature conversion
in the Spreadtrum driver (Thorsten Blum)
- Add SDM670 compatible DT bindings for the Tsens and the lMH thermal
drivers (Richard Acayan)
- Add SM8750 compatible DT bindings for the Tsens thermal driver
(Manaf Meethalavalappu Pallikunhi)
- Add Eliza SoC compatible DT bindings for the Tsens driver
(Krzysztof Kozlowski)
- Fix inverted condition check on error in the Spear thermal control
driver (Gopi Krishna Menon)
- Convert DT bindings documentation into DT schema (Gopi Krishna
Menon)
- Use max() macro to increase readability in the Broadcom STB thermal
sensor (Thorsten Blum)
- Remove a stale @trim_offset kernel-doc entry (John Madieu)"
* tag 'thermal-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
thermal: renesas: rzg3e: Remove stale @trim_offset kernel-doc entry
thermal: core: Suspend thermal zones later and resume them earlier
thermal: core: Allocate thermal_class statically
thermal: core: Adjust thermal_wq allocation flags
thermal: core: Drop redundant check from thermal_zone_device_update()
thermal: core: Free thermal zone ID later during removal
thermal: core: Fix thermal zone governor cleanup issues
thermal/core: Remove pointless variable when registering a cooling device
thermal/drivers/brcmstb_thermal: Use max to simplify brcmstb_get_temp
dt-bindings: thermal: st,thermal-spear1340: convert to dtschema
thermal/drivers/spear: Fix error condition for reading st,thermal-flags
dt-bindings: thermal: qcom-tsens: Add Eliza SoC TSENS
thermal: devfreq_cooling: avoid unnecessary kfree of freq_table
thermal: intel: hfi: use cpumask_empty() in intel_hfi_offline()
thermal: sysfs: Use str_enabled_disabled() helper in mode_show()
dt-bindings: thermal: qcom-tsens: Document the SM8750 Temperature Sensor
thermal/drivers/sprd: Use min instead of clamp in sprd_thm_temp_to_rawdata
dt-bindings: thermal: lmh: Add SDM670 compatible
dt-bindings: thermal: tsens: add SDM670 compatible
thermal/drivers/sprd: Fix raw temperature clamping in sprd_thm_rawdata_to_temp
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support updates from Rafael Wysocki:
"These include an update of the CMOS RTC driver and the related ACPI
and x86 code that, among other things, switches it over to using the
platform device interface for device binding on x86 instead of the PNP
device driver interface (which allows the code in question to be
simplified quite a bit), a major update of the ACPI Time and Alarm
Device (TAD) driver adding an RTC class device interface to it, and
updates of core ACPI drivers that remove some unnecessary and not
really useful code from them.
Apart from that, two drivers are converted to using the platform
driver interface for device binding instead of the ACPI driver one,
which is slated for removal, support for the Performance Limited
register is added to the ACPI CPPC library and there are some
janitorial updates of it and the related cpufreq CPPC driver, the ACPI
processor driver is fixed and cleaned up, and NVIDIA vendor CPER
record handler is added to the APEI GHES code.
Also, the interface for obtaining a CPU UID from ACPI is consolidated
across architectures and used for fixing a problem with the PCI TPH
Steering Tag on ARM64, there are two updates related to ACPICA, a
minor ACPI OS Services Layer (OSL) update, and a few assorted updates
related to ACPI tables parsing.
Specifics:
- Update maintainers information regarding ACPICA (Rafael Wysocki)
- Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy()
(Kees Cook)
- Trigger an ordered system power off after encountering a fatal
error operator in AML (Armin Wolf)
- Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)
- Remove the temporary stop-gap acpi_pptt_cache_v1_full structure
from the ACPI PPTT parser (Ben Horgan)
- Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
DeSimone)
- Address multiple assorted issues and clean up the code in the ACPI
processor idle driver (Huisong Li)
- Replace strlcat() in the ACPI processor idle drive with a better
alternative (Andy Shevchenko)
- Rearrange and clean up acpi_processor_errata_piix4() (Rafael
Wysocki)
- Move reference performance to capabilities and fix an uninitialized
variable in the ACPI CPPC library (Pengjie Zhang)
- Add support for the Performance Limited Register to the ACPI CPPC
library (Sumit Gupta)
- Add cppc_get_perf() API to read performance controls, extend
cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
library warn on missing mandatory DESIRED_PERF register (Sumit
Gupta)
- Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in
target callbacks to allow it to control performance bounds via
standard scaling_min_freq and scaling_max_freq sysfs attributes and
add sysfs documentation for the Performance Limited Register to it
(Sumit Gupta)
- Add ACPI support to the platform device interface in the CMOS RTC
driver, make the ACPI core device enumeration code create a
platform device for the CMOS RTC, and drop CMOS RTC PNP device
support (Rafael Wysocki)
- Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
driver and clean up the CMOS RTC ACPI address space handler (Rafael
Wysocki)
- Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
and allow that driver to work without a dedicated IRQ if the ACPI
alarm is used (Rafael Wysocki)
- Clean up the ACPI TAD driver in various ways and add an RTC class
device interface, including both the RTC setting/reading and alarm
timer support, to it (Rafael Wysocki)
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver
(Rafael Wysocki)
- Update the ACPI core device drivers to stop setting
acpi_device_name() unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver
to bind to platform devices instead of ACPI devices (Rafael
Wysocki)
- Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
Feng)
- Consolidate the interface for obtaining a CPU UID from ACPI across
architectures and use it to address incorrect PCI TPH Steering Tag
on ARM64 resulting from the invalid assumption that the ACPI
Processor UID would always be the same as the corresponding logical
CPU ID in Linux (Chengwen Feng)"
* tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits)
ACPICA: Update maintainers information
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: processor: idle: Reset cpuidle on C-state list changes
cpuidle: Extract and export no-lock variants of cpuidle_unregister_device()
PCI/TPH: Pass ACPI Processor UID to Cache Locality _DSM
ACPI: PPTT: Use acpi_get_cpu_uid() and remove get_acpi_id_for_cpu()
perf: arm_cspmu: Switch to acpi_get_cpu_uid() from get_acpi_id_for_cpu()
ACPI: Centralize acpi_get_cpu_uid() declaration in include/linux/acpi.h
x86/acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
RISC-V: ACPI: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
LoongArch: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
arm64: acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
ACPI: APEI: GHES: Add NVIDIA vendor CPER record handler
PCI: hisi: Use devm_ghes_register_vendor_record_notifier()
ACPI: APEI: GHES: Add devm_ghes_register_vendor_record_notifier()
ACPI: tables: Enable FPDT on LoongArch
ACPI: processor: idle: Fix NULL pointer dereference in hotplug path
ACPI: processor: idle: Reset power_setup_done flag on initialization failure
ACPI: TAD: Add alarm support to the RTC class device interface
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Fix NULL pointer dereference in debugfs_create_str()
- Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
- Fix soundwire debugfs NULL pointer dereference from uninitialized
firmware_file
device property:
- Make fwnode flags modifications thread safe; widen the field to
unsigned long and use set_bit() / clear_bit() based accessors
- Document how to check for the property presence
devres:
- Separate struct devres_node from its "subclasses" (struct devres,
struct devres_group); give struct devres_node its own release and
free callbacks for per-type dispatch
- Introduce struct devres_action for devres actions, avoiding the
ARCH_DMA_MINALIGN alignment overhead of struct devres
- Export struct devres_node and its init/add/remove/dbginfo
primitives for use by Rust Devres<T>
- Fix missing node debug info in devm_krealloc()
- Use guard(spinlock_irqsave) where applicable; consolidate unlock
paths in devres_release_group()
driver_override:
- Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
generic driver_override infrastructure, replacing per-bus
driver_override strings, sysfs attributes, and match logic; fixes a
potential UAF from unsynchronized access to driver_override in bus
match() callbacks
- Simplify __device_set_driver_override() logic
kernfs:
- Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs file
and directory removal
- Add corresponding selftests for memcg
platform:
- Allow attaching software nodes when creating platform devices via a
new 'swnode' field in struct platform_device_info
- Add kerneldoc for struct platform_device_info
software node:
- Move software node initialization from postcore_initcall() to
driver_init(), making it available early in the boot process
- Move kernel_kobj initialization (ksysfs_init) earlier to support
the above
- Remove software_node_exit(); dead code in a built-in unit
SoC:
- Introduce of_machine_read_compatible() and of_machine_read_model()
OF helpers and export soc_attr_read_machine() to replace direct
accesses to of_root from SoC drivers; also enables
CONFIG_COMPILE_TEST coverage for these drivers
sysfs:
- Constify attribute group array pointers to
'const struct attribute_group *const *' in sysfs functions,
device_add_groups() / device_remove_groups(), and struct class
Rust:
- Devres:
- Embed struct devres_node directly in Devres<T> instead of going
through devm_add_action(), avoiding the extra allocation and the
unnecessary ARCH_DMA_MINALIGN alignment
- I/O:
- Turn IoCapable from a marker trait into a functional trait
carrying the raw I/O accessor implementation (io_read /
io_write), providing working defaults for the per-type Io
methods
- Add RelaxedMmio wrapper type, making relaxed accessors usable in
code generic over the Io trait
- Remove overloaded per-type Io methods and per-backend macros
from Mmio and PCI ConfigSpace
- I/O (Register):
- Add IoLoc trait and generic read/write/update methods to the Io
trait, making I/O operations parameterizable by typed locations
- Add register! macro for defining hardware register types with
typed bitfield accessors backed by Bounded values; supports
direct, relative, and array register addressing
- Add write_reg() / try_write_reg() and LocatedRegister trait
- Update PCI sample driver to demonstrate the register! macro
Example:
```
register! {
/// UART control register.
CTRL(u32) @ 0x18 {
/// Receiver enable.
19:19 rx_enable => bool;
/// Parity configuration.
14:13 parity ?=> Parity;
}
/// FIFO watermark and counter register.
WATER(u32) @ 0x2c {
/// Number of datawords in the receive FIFO.
26:24 rx_count;
/// RX interrupt threshold.
17:16 rx_water;
}
}
impl WATER {
fn rx_above_watermark(&self) -> bool {
self.rx_count() > self.rx_water()
}
}
fn init(bar: &pci::Bar<BAR0_SIZE>) {
let water = WATER::zeroed()
.with_const_rx_water::<1>(); // > 3 would not compile
bar.write_reg(water);
let ctrl = CTRL::zeroed()
.with_parity(Parity::Even)
.with_rx_enable(true);
bar.write_reg(ctrl);
}
fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
if bar.read(WATER).rx_above_watermark() {
// drain the FIFO
}
}
fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
bar.update(CTRL, |r| r.with_parity(parity));
}
```
- IRQ:
- Move 'static bounds from where clauses to trait declarations for
IRQ handler traits
- Misc:
- Enable the generic_arg_infer Rust feature
- Extend Bounded with shift operations, single-bit bool
conversion, and const get()
Misc:
- Make deferred_probe_timeout default a Kconfig option
- Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
callbacks when no bus type PM ops are set
- Add conditional guard support for device_lock()
- Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
- Fix kernel-doc warnings in base.h
- Fix stale reference to memory_block_add_nid() in documentation"
* tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (67 commits)
bus: fsl-mc: use generic driver_override infrastructure
s390/ap: use generic driver_override infrastructure
s390/cio: use generic driver_override infrastructure
vdpa: use generic driver_override infrastructure
platform/wmi: use generic driver_override infrastructure
PCI: use generic driver_override infrastructure
driver core: make software nodes available earlier
software node: remove software_node_exit()
kernel: ksysfs: initialize kernel_kobj earlier
MAINTAINERS: add ksysfs.c to the DRIVER CORE entry
drivers/base/memory: fix stale reference to memory_block_add_nid()
device property: Document how to check for the property presence
soundwire: debugfs: initialize firmware_file to empty string
debugfs: fix placement of EXPORT_SYMBOL_GPL for debugfs_create_str()
debugfs: check for NULL pointer in debugfs_create_str()
driver core: Make deferred_probe_timeout default a Kconfig option
driver core: simplify __device_set_driver_override() clearing logic
driver core: auxiliary bus: Drop auxiliary_dev_pm_ops
device property: Make modifications of fwnode "flags" thread safe
rust: devres: embed struct devres_node directly
...
|
|
AMD PIIX4 SMBus adapters, present on AMD SP5/EPYC-based platforms
(including Cisco 8000 series routers), support SMBUS_BYTE_DATA and
SMBUS_WORD_DATA but lack I2C_FUNC_I2C and I2C_FUNC_SMBUS_I2C_BLOCK.
When at24 (or any driver) requests a regmap with reg_bits=16 and
val_bits=8 on such an adapter, regmap_get_i2c_bus() finds no matching
bus and returns -ENOTSUPP. The existing regmap_i2c_smbus_i2c_block_reg16
bus type already implements 16-bit addressed reads using only
write_byte_data() + read_byte() primitives, but its selection is gated
on I2C_FUNC_SMBUS_I2C_BLOCK which these adapters lack.
Add a new regmap_smbus_byte_word_reg16 bus that:
READ: reuses regmap_i2c_smbus_i2c_read_reg16() -- sets the 16-bit
address via write_byte_data(addr_lo, addr_hi), then reads
bytes sequentially via read_byte() (EEPROM auto-increments).
Requires only SMBUS_BYTE_DATA.
WRITE: uses write_word_data(addr_hi, (data << 8) | addr_lo) to
encode one data byte per SMBus WORD transaction.
Requires only SMBUS_WORD_DATA. Single-byte writes only.
The new bus is selected in regmap_get_i2c_bus() when reg_bits=16,
val_bits=8, and the adapter has SMBUS_BYTE_DATA | SMBUS_WORD_DATA but
not I2C_FUNC_I2C or SMBUS_I2C_BLOCK. The branch is placed after the
existing I2C_BLOCK_reg16 check so adapters with full block support
continue to use the faster path.
This fixes at24 EEPROM probe failures on PIIX4:
at24 3-0055: probe with driver at24 failed with error -524
No driver changes are required -- at24 already passes reg_bits=16 to
devm_regmap_init_i2c(), which now succeeds.
Signed-off-by: Nishanth Sampath Kumar <nissampa@cisco.com>
Link: https://patch.msgid.link/20260407233927.498932-1-nissampa@cisco.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It's possible that at the time of resolving a reference to a remote
software node, the node we know exists is not yet registered as a full
firmware node. We currently return -ENOENT in this case but the same
error code is also returned in some other cases, like the reference
property with given name not existing in the property list of the local
software node.
It makes sense to let users know that we're dealing with an unregistered
software node so that they can defer probe - the situation is somewhat
similar to there existing a firmware node to which no device is bound
yet - which is valid grounds for probe deferral. To that end: use
-ENOTCONN to indicate the software node is "not connected".
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260407-swnode-unreg-retcode-v4-1-1b2f0725eb9c@oss.qualcomm.com
[ Drop software node backend specifics from
fwnode_property_get_reference_args() documentation. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The moment we link a "struct device" into the list of devices for the
bus, it's possible probe can happen. This is because another thread
can load the driver at any time and that can cause the device to
probe. This has been seen in practice with a stack crawl that looks
like this [1]:
really_probe()
__driver_probe_device()
driver_probe_device()
__driver_attach()
bus_for_each_dev()
driver_attach()
bus_add_driver()
driver_register()
__platform_driver_register()
init_module() [some module]
do_one_initcall()
do_init_module()
load_module()
__arm64_sys_finit_module()
invoke_syscall()
As a result of the above, it was seen that device_links_driver_bound()
could be called for the device before "dev->fwnode->dev" was
assigned. This prevented __fw_devlink_pickup_dangling_consumers() from
being called which meant that other devices waiting on our driver's
sub-nodes were stuck deferring forever.
It's believed that this problem is showing up suddenly for two
reasons:
1. Android has recently (last ~1 year) implemented an optimization to
the order it loads modules [2]. When devices opt-in to this faster
loading, modules are loaded one-after-the-other very quickly. This
is unlike how other distributions do it. The reproduction of this
problem has only been seen on devices that opt-in to Android's
"parallel module loading".
2. Android devices typically opt-in to fw_devlink, and the most
noticeable issue is the NULL "dev->fwnode->dev" in
device_links_driver_bound(). fw_devlink is somewhat new code and
also not in use by all Linux devices.
Even though the specific symptom where "dev->fwnode->dev" wasn't
assigned could be fixed by moving that assignment higher in
device_add(), other parts of device_add() (like the call to
device_pm_add()) are also important to run before probe. Only moving
the "dev->fwnode->dev" assignment would likely fix the current
symptoms but lead to difficult-to-debug problems in the future.
Fix the problem by preventing probe until device_add() has run far
enough that the device is ready to probe. If somehow we end up trying
to probe before we're allowed, __driver_probe_device() will return
-EPROBE_DEFER which will make certain the device is noticed.
In the race condition that was seen with Android's faster module
loading, we will temporarily add the device to the deferred list and
then take it off immediately when device_add() probes the device.
Instead of adding another flag to the bitfields already in "struct
device", instead add a new "flags" field and use that. This allows us
to freely change the bit from different thread without worrying about
corrupting nearby bits (and means threads changing other bit won't
corrupt us).
[1] Captured on a machine running a downstream 6.6 kernel
[2] https://cs.android.com/android/platform/superproject/main/+/main:system/core/libmodprobe/libmodprobe.cpp?q=LoadModulesParallel
Cc: stable@vger.kernel.org
Fixes: 2023c610dc54 ("Driver core: add new device to bus's list before probing")
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260406162231.v5.1.Id750b0fbcc94f23ed04b7aecabcead688d0d8c17@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add __regmap_init_i3c() and the corresponding regmap_init_i3c() macro to
allow creating a regmap for I3C devices without using the device-managed
version. This mirrors the pattern already established for other buses
such as I2C, SPI and so on, giving drivers more flexibility when
the regmap lifetime is not directly tied to the device.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/a81256a8866b163979a20406abf01df7d7440104.1775788105.git.xiaopei01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge ACPI core driver core driver updates and assorted driver updates
related to ACPI support for 7.1-rc1:
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
Wysocki)
- Update the ACPI core device drivers to stop setting acpi_device_name()
unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
bind to platform devices instead of ACPI devices (Rafael Wysocki)
* acpi-driver:
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: AC: Define ACPI_AC_CLASS in one place
ACPI: driver: Do not set acpi_device_class() unnecessarily
ACPI: driver: Avoid using pnp.device_class for netlink handling
ACPI: event: Redefine acpi_notifier_call_chain()
ACPI: driver: Do not set acpi_device_name() unnecessarily
ACPI: video: Consolidate pnp.bus_id workarounds handling
ACPI: video: Rework checking for duplicate video bus devices
driver core: auxiliary bus: Introduce dev_is_auxiliary()
ACPI: PAD: Rearrange notify handler installation and removal
ACPI: AC: Get rid of unnecessary declarations
|
|
Use IDA instead of a simple counter for generating unique dummy names.
The previous implementation used dummy_index++ which is not atomic,
leading to potential duplicate names when multiple threads call
regmap_debugfs_init() concurrently with name="dummy".
Signed-off-by: Zxyan Zhu <zxyan0222@gmail.com>
Link: https://patch.msgid.link/20260409035015.950764-1-zxyan0222@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
kernfs has historically used const void * to pass around namespace tags
used for directory-level namespace filtering. The only current user of
this is sysfs network namespace tagging where struct net pointers are
cast to void *.
Replace all const void * namespace parameters with const struct
ns_common * throughout the kernfs, sysfs, and kobject namespace layers.
This includes the kobj_ns_type_operations callbacks, kobject_namespace(),
and all sysfs/kernfs APIs that accept or return namespace tags.
Passing struct ns_common is needed because various codepaths require
access to the underlying namespace. A struct ns_common can always be
converted back to the concrete namespace type (e.g., struct net) via
container_of() or to_ns_common() in the reverse direction.
This is a preparatory change for switching to ns_id-based directory
iteration to prevent a KASLR pointer leak through the current use of
raw namespace pointers as hash seeds and comparison keys.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
To avoid some undesirable interactions between thermal zone suspend
and resume with user space that is running when those operations are
carried out, move them closer to the suspend and resume of devices,
respectively, by updating dpm_prepare() to carry out thermal zone
suspend and dpm_complete() to start thermal zone resume (that will
continue asynchronously).
This also makes the code easier to follow by removing one, arguably
redundant, level of indirection represented by the thermal PM notifier.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/2036875.PYKUYFuaPT@rafael.j.wysocki
|
