| Age | Commit message (Collapse) | Author |
|---|
|
Unloading the mt7915e module with a MT7916 triggers multiples WARN in
__netif_napi_del_locked() and in page_pool_disable_direct_recycling()
because the driver does not disable the napi before destroying it.
This is troublesome since on MT7916 it is required to unload the module
and reinsert it with a different enable_6ghz parameter to change the
frequency. The system generally becomes unstable after reinserting the
module.
Fix it by disabling napi before deleting it. Also, do not delete napi
on WED queues since napi is neither used nor initialized on them.
Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Link: https://patch.msgid.link/20260708144615.24092-1-nicolas.cavallari@green-communications.fr
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: eb99cc95c3b6 ("mt76: mt7615: introduce mt7663u support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-4-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and
mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus.
mt7925_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB it is NULL, so a
TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7925_mac_tx_free+0x58/0x350 [mt7925_common]
mt7925_rx_check+0xe2/0x130 [mt7925_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-3-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support")
Cc: stable@vger.kernel.org
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/20260627191336.20223-2-lucid_duck@justthetip.ca
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
dev->stats fields can be updated concurrently from multiple CPUs
without synchronization.
Use DEV_STATS_INC() for stats increments and DEV_STATS_READ()
when reading dev->stats in ppp_get_stats64() and ppp_get_stats()
to avoid data races.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Qingfang Deng <qingfang.deng@linux.dev>
Link: https://patch.msgid.link/20260715055541.1147542-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Don't populate the read-only const array ts_reg on the stack
at run time, instead make it static
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260714191406.195375-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
intel_mac_finish() is registered as the phylink mac_finish()
callback for the Elkhart Lake SGMII ports. phylink calls it at
the end of every major link reconfiguration, including the
initial one during probe.
The callback selects the PMC ModPHY LCPLL programming for the
requested MAC-side interface and then power-cycles the SerDes.
On Elkhart Lake that ModPHY is also used by the on-die AHCI
SATA PHY. Reapplying the programming during the initial
boot-time link-up disturbs the shared analog block while it is
still driving SATA, so the SATA link fails to train:
ata1: SATA link down (SStatus 1 SControl 300)
The disk carrying the root filesystem is never detected and the
system hangs at rootwait. Ethernet itself comes up normally,
which makes the failure look unrelated to the network driver.
Before mac_finish() runs, the legacy SerDes power-up path has
already programmed SERDES_GCR0 for the current interface. The
1G and 2.5G ModPHY tables selected by mac_finish() correspond
to the SerDes lane rate, so read that rate back from SERDES_GCR0
and skip the PMC reprogramming and SerDes power-cycle when it
already matches the selected interface.
This keeps the disruptive reprogramming out of the boot path
when the SerDes is configured correctly, while preserving the
previous behavior when a real SGMII/1000BASE-X to 2500BASE-X
rate change is needed. If the register read fails, reconfigure
as before.
Fixes: a42f6b3f1cc1 ("net: stmmac: configure SerDes according to the interface mode")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Breitenberger <bre@keba.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260713171619.192452-1-bre@breiti.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gtp1u_send_echo_resp() ignores skb_pull_data()'s return value. Its
caller gtp1u_udp_encap_recv() only guarantees 16 bytes (udphdr +
gtp1_header), but the pull requests 20 (gtp1_header_long + udphdr). For
a 16-19 byte echo request the pull fails and returns NULL without
advancing skb->data; execution continues, and the following skb_push()
plus the IP header pushed by iptunnel_xmit() move skb->data below
skb->head, tripping skb_under_panic().
Fix it by dropping the packet when skb_pull_data() fails.
skbuff: skb_under_panic: ...
kernel BUG at net/core/skbuff.c:214!
Call Trace:
skb_push (net/core/skbuff.c:2648)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:82)
gtp_encap_recv (drivers/net/gtp.c:701 drivers/net/gtp.c:808 drivers/net/gtp.c:920)
udp_queue_rcv_one_skb (net/ipv4/udp.c:2388)
...
Kernel panic - not syncing: Fatal exception in interrupt
Fixes: 9af41cc33471 ("gtp: Implement GTP echo response")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Link: https://patch.msgid.link/20260710230724.942574-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for set_coalesce in wx_ethtool_ops_vf, which
is used to set interrupt coalescing parameters.
Update wx_write_eitr_vf() to use the same interrupt
moderation encoding as PF devices, since PF and VF share
the same register layout. And remove the now-unused
WX_VXITR_MASK definition.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20260710015925.34769-3-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for the set_ringparam in wx_ethtool_ops_vf,
which is used to set ring sizes for ngbevf and txgbevf.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Link: https://patch.msgid.link/20260710015925.34769-2-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the system is under extreme memory pressure, page allocations can
fail during the Rx buffer refill loop. If the number of buffers posted
to hardware falls below a critical low threshold and the refill loop
exits due to allocation failures, the queue can stall:
1. The device drops incoming packets because there are no descriptors.
2. Since no packets are processed, no Rx completions are generated.
3. Because no completions occur, NAPI is never scheduled, preventing
the refill loop from running again even after memory is freed.
This results in a permanent queue stall.
Resolve this by introducing a starvation recovery timer for each Rx queue.
If the number of buffers posted to hardware falls below a critical low
threshold, start a timer to periodically reschedule NAPI. Once NAPI runs
and successfully refills the queue above the threshold, the timer is
not rescheduled.
The threshold is set to 32 because a single maximum-sized Receive Segment
Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path.
Lower thresholds (such as 8 or 16) would be insufficient to process a
complete maximum-sized RSC packet, risking packet drops or unexpected
hardware behavior under memory pressure. Setting the threshold to 32
guarantees a safe margin to handle at least one full RSC packet.
Cc: stable@vger.kernel.org
Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path")
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Eddie Phillips <eddiephillips@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20260709211906.3322883-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add DPP AKM handling and RSN parsing support. Map DPP to the firmware
wpa_auth value and recognize DPP public action frames in the P2P
action-frame TX path.
Gate sup_wpa programming on firmware supplicant capability. Disable it
only when the selected connection mode does not use firmware supplicant.
This keeps pure SAE and 802.1X firmware-supplicant paths intact while
avoiding stale firmware supplicant state for DPP.
Signed-off-by: Kurt Lee <kurt.lee@cypress.com>
Signed-off-by: Jason Huang <jason.huang2@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260715084718.667522-1-Jason.Huang2@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Jeff Chen says:
===============
wifi: nxp: patches for wireless-next
In nxpwifi, introduce initial driver support for NXP IW61x Wi-Fi chipsets.
The driver supports 802.11ac/ax, SDIO interface, Station and uAP modes.
===============
[list the full vendor directory in MAINTAINERS]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Now that timestamping is controlled through an NDO, we can simply
call phylink_mii_ioctl() to handle ioctls.
The only functional difference is that phylink_mii_ioctl() ->
phy_mii_ioctl() can handle SIOCSHWTSTAMP, but this no longer happens
as this ioctl is not longer dispatched to the ndo_eth_ioctl().
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260718143848.677531-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add quirk for a copper SFP+ module that identifies itself as "OEM"
"HC-10GE-113C". It uses RollBall protocol to talk to the PHY.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260719100158.874882-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mctp_i3c_mod_init() registers the I3C bus notifier and then walks the
existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL)
before registering the I3C device driver. If i3c_driver_register()
fails, the function returns the error directly, leaving the notifier
registered and every mctp_i3c_bus object created for the existing buses
allocated. The notifier is left pointing into the module that failed to
load and the bus list is leaked.
Mirror the module exit path on this failure: unregister the notifier and
tear down the buses that were added before returning the error.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: c8755b29b58e ("mctp i3c: MCTP I3C driver")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260715072517.13216-1-mhun512@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pdsc_init_pf() does not check whether create_singlethread_workqueue()
succeeded.
Fail probe on failure. The workqueue is set up before the timer and
mutexes, so its failure path must unwind only the earlier setup.
Fixes: c2dbb0904310 ("pds_core: health timer and workqueue")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260629200358.2626129-1-nikhil.rao%40amd.com?part=2
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260714212713.1788438-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two paths add or delete the same slot (pf->vfs[vf_id].padev): a VF's
pdsc_reset_done() and the PF's devlink enable_vnet/disable_vnet handler.
They serialize on config_lock, but neither guards the slot under it
correctly.
add() registers and stores a new auxiliary device without first checking
the slot, so a second add of an already-populated slot leaks the first
device. del() makes that check outside config_lock, so two concurrent
dels can both pass it; the first clears the slot, and the second
dereferences a NULL pointer.
Check and update the slot under config_lock in both paths.
Fixes: b699bdc720c0 ("pds_core: specify auxiliary_device to be created")
Reported-by: sashiko-bot@kernel.org # Running on a local machine
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260714210745.1785625-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pdsc_process_adminq() and pdsc_process_notifyq() decide a completion is
valid from its ownership field - the color bit for the adminq, the event
id for the notifyq - then read the rest of the descriptor, with no
barrier in between.
On a weakly ordered architecture the CPU may read the payload first. Add
dma_rmb() between the ownership read and the payload reads.
Fixes: 7e82a8745b95 ("pds_core: Prevent race issues involving the adminq")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260629200358.2626129-1-nikhil.rao%40amd.com?part=2
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Eric Joyner <eric.joyner@amd.com>
Link: https://patch.msgid.link/20260714204145.1782390-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pdsc_adminq_wait_and_dec_once_unused() busy-waits for adminq_refcnt to
drop to one:
while (!refcount_dec_if_one(&pdsc->adminq_refcnt))
cpu_relax();
The refcount is held by pdsc_adminq_post() for the duration of an
in-flight command, which can wait up to devcmd_timeout seconds
(PDS_CORE_DEVCMD_TIMEOUT is 5) for the hardware to complete. cpu_relax()
is not a reschedule point, so on a non-preemptible kernel this loop can
spin on the CPU for several seconds, starving other tasks on that core.
Add cond_resched() to the loop so the waiter yields to other runnable
tasks while it polls, keeping cpu_relax() as the busy-wait hint between
checks.
Fixes: 7e82a8745b95 ("pds_core: Prevent race issues involving the adminq")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260629200358.2626129-1-nikhil.rao%40amd.com?part=2
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Eric Joyner <eric.joyner@amd.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260714201456.1776153-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In pdsc_remove(), the workqueue is destroyed before pdsc_teardown()
is called. This ordering allows two paths to queue work on the
destroyed workqueue:
1. If pdsc_teardown() -> pdsc_devcmd_reset() times out, the error
path in pdsc_devcmd_locked() queues health_work.
2. A NotifyQ event can trigger the ISR and queue work before free_irq()
is called in pdsc_teardown().
Fix by moving destroy_workqueue() after pdsc_teardown() so the
workqueue outlives every queuer; destroy_workqueue() then flushes any
work still pending.
Draining the queued work also requires ordering the teardown so the
resources that work touches are freed last:
- In pdsc_qcq_free(), after freeing the interrupt, cancel_work_sync()
the queue's work and only then clear qcq->intx, so
pdsc_process_adminq()'s read of qcq->intx for interrupt-credit
return cannot race with the clear.
- Free adminqcq before notifyqcq: the shared adminq ISR is released
when adminqcq is freed, and the adminq work accesses notifyqcq, so
both must be stopped before notifyqcq is freed.
Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://patchwork.kernel.org/comment/27002369/
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260714180223.1642792-3-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pci_reset_function() acquires device_lock before performing the reset.
pdsc_remove() is called by the PCI core with device_lock already held.
If pdsc_pci_reset_thread() is running when pdsc_remove() is called,
destroy_workqueue() will block waiting for the work to complete, while
the work is blocked waiting for device_lock - deadlock.
Use pci_try_reset_function() which uses pci_dev_trylock() internally.
This acquires both the device lock and the PCI config access lock
without blocking - if either lock is contended, it returns -EAGAIN
immediately. This avoids the deadlock while also ensuring proper
config space access serialization during the reset.
The pci_dev_get/put calls are also removed as they were unnecessary -
the driver-owned workqueue is destroyed in pdsc_remove(), guaranteeing
the work completes before remove returns. The PCI core holds its
reference to pci_dev throughout the entire unbind sequence.
Fixes: 81665adf25d2 ("pds_core: Fix pdsc_check_pci_health function to use work thread")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://patchwork.kernel.org/comment/27002369/
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260714180223.1642792-2-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During address teardown, the inetaddr notifier may be called multiple
times for the same interface. Ignore NETDEV_DOWN events if the RIF has
already been destroyed, rather than returning -EEXIST, which aborts the
notifier chain.
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20260711005405.2861680-2-yuyanghuang@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Perfect FDIR filters can be added while the interface is down and are
kept on the software list for later restore. unregister_netdev() only
calls ndo_stop when the device is up, so txgbe_fdir_filter_exit() in
txgbe_close() is skipped in that case and the filters are leaked on
driver remove. Free the filter list from txgbe_remove() as well.
Fixes: 4bdb441105dc ("net: txgbe: support Flow Director perfect filters")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260713091911.1614795-1-chenguang.zhao@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
txgbe_read_eeprom_hostif() always copies round_up(length, 4) bytes
into the caller buffer, which ethtool allocates with exactly 'length'
bytes. A non-4-aligned length therefore causes an out-of-bounds write.
Copy only the remaining bytes on the final dword instead.
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 9b97b6b5635b ("net: txgbe: support getting module EEPROM by page")
Link: https://patch.msgid.link/20260713085111.1481884-1-chenguang.zhao@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hardware performs packet parsing before packet transmission.
Parsing incomplete IPv4, IPv6, TCP, or UDP headers may trigger a TX
hang because the hardware parser expects additional protocol header
data that is not present in the packet.
The hardware performs additional PTP parsing on UDP packets identified
by destination ports 319/320 at the expected UDP destination port
offset.
If such a packet has transport data smaller than RTASE_MIN_PAD_LEN,
the hardware parser expects additional packet data and may trigger a
TX hang.
To avoid these hardware issues, the driver applies the following
workarounds.
Drop malformed packets that may trigger this hardware issue before
transmission.
For IPv4 non-initial fragments, the hardware does not check the
fragment offset before parsing the expected transport header location.
As a result, these packets are still subject to transport header
parsing even though they do not contain a transport header. If the
transport data is shorter than the minimum transport header required
by the hardware parser, pad the transport data to the minimum
transport header length required by the hardware parser. Packets that
also match the hardware PTP parsing conditions continue to follow the
corresponding workaround.
For IPv6 fragmented packets, neither of the above hardware issues
occurs because the hardware only continues packet parsing when the
IPv6 Base Header Next Header field directly indicates UDP. Packets
carrying a Fragment Header do not continue through the subsequent
packet parsing stages.
For packets identified for hardware PTP parsing, pad the transport
data so it reaches RTASE_MIN_PAD_LEN before transmission.
Fixes: d6e882b89fdf ("rtase: Implement .ndo_start_xmit function")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260709103456.83789-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The YT921x switch has two MAC ports: 8 and 9. Currently, the driver
only allows port 8 as an external port, while port 9 is not working:
yt921x mdio-bus:1d: Wrong mode 23 on port 9
yt921x mdio-bus:1d: Failed to config port 9: -22
Update the external port detection logic to enable the external PHY
connected to port 9.
Cc: stable+noautosel@kernel.org # never worked
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://patch.msgid.link/20260710100000.3018614-1-amadeus@jmu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If hbg_dma_map() fails, hbg_net_start_xmit() frees the skb, but buffer->skb
is left pointing to it. ring->ntu is not advanced, so the buffer is not
visible to the TX cleanup path.
A subsequent transmit normally overwrites the buffer. However, if the
interface is brought down first, hbg_ring_uninit() calls hbg_buffer_free().
It sees the stale pointer, attempts to unmap the failed mapping, and frees
the skb again.
Clear buffer->skb before freeing the skb in the error path, preventing
hbg_buffer_free() from treating it as an outstanding TX buffer.
Cc: stable+noautosel@kernel.org # untested fix to unlikely driver error path
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260710090527.58354-4-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If hinic3_tx_map_skb() fails in hinic3_send_one_skb(), the skb is freed,
but tx_info->skb was set before the mapping attempt and is not cleared. The
SQ producer index is rolled back, so later transmissions normally overwrite
the entry.
If the interface is brought down first, hinic3_free_txqs_res() calls
free_all_tx_skbs(). It scans the entire tx_info array and finds the stale
pointer. hinic3_tx_unmap_skb() then dereferences the freed skb in
skb_shinfo(), before it is freed again.
Set tx_info->skb and its WQEBB count only after DMA mapping succeeds,
preventing the stale pointer from reaching free_all_tx_skbs().
Cc: stable+noautosel@kernel.org # untested fix to unlikely driver error path
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Fan Gong <gongfan1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260710090527.58354-3-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If dma_map_single() fails in bnad_start_xmit(), the skb is freed, but
head_unmap->skb was set before the mapping attempt and is not cleared. The
producer index is not advanced, so later transmissions normally overwrite
the entry.
However, if the interface is brought down first, bnad_txq_cleanup() scans
the entire unmap queue, finds the stale pointer, and calls
bnad_tx_buff_unmap() on it. That function dereferences the freed skb in
skb_headlen(). Its zero nvecs count is decremented to -1, causing its
while (nvecs) loop to repeatedly unmap entries around the TX ring and
potentially hang cleanup.
Set head_unmap->skb after the first DMA mapping succeeds. This prevents the
stale entry from reaching bnad_tx_buff_unmap().
Cc: stable+noautosel@kernel.org # untested fix to unlikely error path
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260710090527.58354-2-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure to drop the reference taken to the buffer manager device when
attempting to look up its driver data before the driver has been bound.
Note that holding a reference to a device does not prevent its driver
data from going away.
Cc: stable+noautosel@kernel.org # untested fix to unlikely error path
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260709082713.829446-1-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure the IPv4/6 and UDP headers are writable before fixing them up in
geneve_post_decap_hint. As skb_ensure_writable can reallocate the skb linear
area, reload the GRO hint header pointer and only set the IPv4/6 header ones
after the call.
Fixes: fd0dd796576e ("geneve: use GRO hint option in the RX path")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260529144713.780938-1-atenart%40kernel.org
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260709125000.141092-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lachlan Hodges says:
====================
Introduce mm81x driver for mm81x based chipsets plus associated
SDIO ids.
====================
[list the full vendor directory in MAINTAINERS]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Bitfields are packed differently depending on the endianness, take it into
account in the GRO hint header definition.
Fixes: e0a12cbf262b ("geneve: add GRO hint output path")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260529144713.780938-1-atenart%40kernel.org
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260709124801.140632-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The BCM43752 is not reliable with the default 512-byte SDIO function 2
block size: on an i.MX8MP board with an AMPAK AP6275S module at
SDR104 / 200 MHz, an iperf TX stress test kills WLAN within seconds:
mmc_submit_one: CMD53 sg block write failed -84
brcmf_sdio_dpc: failed backplane access over SDIO, halting operation
Commit d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization")
set up the 43752 like the 4373 for the F2 watermark but missed the F2
block size, which the 4373 limits to 256 bytes. The vendor driver
(bcmdhd) also programs a 256-byte F2 block size for this chip and runs
the same hardware without errors.
Group the 43752 with the 4373, matching the F2 watermark handling.
With this change a 10-minute bidirectional iperf3 soak completes with
zero SDIO errors at ~270 Mbit/s in each direction.
Backporting note: kernels before v6.18 name this id
SDIO_DEVICE_ID_BROADCOM_CYPRESS_43752, so on those trees the case
label added by this patch must be adjusted to that name. Cherry-picking
the rename commit 74e2ef72bd4b ("wifi: brcmfmac: fix 43752 SDIO FWVID
incorrectly labelled as Cypress (CYW)") first is not a clean
alternative: on trees before v6.17 its context collides with the 43751
additions, and trees before v6.2 lack the FWVID framework it touches.
Fixes: d2587c57ffd8 ("brcmfmac: add 43752 SDIO ids and initialization")
Cc: stable@vger.kernel.org # see patch description, needs adjustments for <= 6.17
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260715-b43752-f2-blksz-v2-1-f9be49856050@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mac80211_hwsim saves the in-flight cfg80211 PMSR request and its wdev
in data->pmsr_request / data->pmsr_request_wdev when a measurement
starts, and clears them only when it reports completion.
mac80211_hwsim_abort_pmsr() never cleared that saved state. cfg80211
owns the request and frees it once the abort callback returns
(cfg80211_pmsr_process_abort() calls rdev_abort_pmsr() then
kfree(req)), so after an abort data->pmsr_request dangles. A later
hwsim PMSR report then dereferences the freed request in
hwsim_pmsr_report_nl() and completes it; a use-after-free.
Clear data->pmsr_request and data->pmsr_request_wdev once the abort
matches the active request. Move the wmediumd/virtio notification check
below the clear so the saved state is dropped even when no notification
is sent.
Assisted-by: Codex:gpt-5
Assisted-by: Claude:opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260708195911.84365-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
hwsim_pmsr_report_nl() looks up the radio by HWSIM_ATTR_ADDR_TRANSMITTER
and, when data->pmsr_request is set, parses the reported peer results,
hands them to cfg80211_pmsr_report(), then unconditionally clears
data->pmsr_request and calls cfg80211_pmsr_complete() to end the
measurement.
Unlike the sibling wmediumd data-path handlers
hwsim_tx_info_frame_received_nl() and hwsim_cloned_frame_received_nl(),
which check the sending socket's netgroup against data->netgroup and its
portid against data->wmediumd, this handler did not check the sender at
all, and its genl op carries no GENL_UNS_ADMIN_PERM flag. In non-virtio
(wmediumd) mode any process in the netns that can reach the hwsim
generic netlink family could therefore send a report. The transmitter
address is not secret, so such a process could inject spoofed ranging
results for another radio's in-flight request and, because the handler
always completes the measurement, terminate a ranging operation owned by
the real wmediumd session.
Reject reports whose sender does not match the registered wmediumd
instance, mirroring the sibling handlers: in non-virtio mode require
the sending socket's netgroup to equal data->netgroup and
info->snd_portid to equal data->wmediumd before touching the request
state.
Assisted-by: Codex:gpt-5
Assisted-by: Claude:opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260708195911.84365-3-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add an overflow check to ensure that data_offset + data_len + 8 does not
wrap, which would enable an OOB read of the USB data buffer.
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Shaoxu Liu <shaoxul@foxmail.com>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2026070900-denim-brook-52d4@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MAC_AUTO_SW (VR_MII_DIG_CTRL1 bit 9) enables automatic XPCS speed
mode switching after CL37 auto-negotiation and is only meaningful in
SGMII MAC mode. The original code unconditionally set this bit on
every call to xgbe_an37_set(), including when called from
xgbe_an37_disable() with enable=false. This left MAC_AUTO_SW=1 after
AN was disabled, causing the XPCS to autonomously switch speed from
stale AN state during subsequent mode changes, breaking SGMII speed
negotiation on 1G copper SFP modules.
Patrick: This was breaking negotiation for all 1G SFP modules,
not just copper modules.
Fixes: 42fd432fe6d3 ("amd-xgbe: align CL37 AN sequence as per databook")
Reported-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Link: https://lore.kernel.org/netdev/CAEg67GmFS0Q4oSZkz8zWdOzckSth9_vBPiOy6a7-d697C2w2Xg@mail.gmail.com
Signed-off-by: Prashanth Kumar KR <PrashanthKumar.K.R@amd.com>
Tested-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Link: https://patch.msgid.link/20260709095006.3683940-1-prashanthkumar.k.r@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During a tree-wide gpio include cleanup, the linux/gpio.h include was
replaced with linux/gpio/consumer.h.
mdio-device.c was already including that header, resulting in a
duplicated inclusion. Let's drop it.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260715201213.206180-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 0be5c3f0fbef3679f50f345b9237b8f9ea5de4e9.
Commit 0be5c3f0fbef ("gtp: annotate PDP lookups under RTNL") added a
lockdep_rtnl_is_held condition to hlist_for_each_rcu() loops to help
insure that RTNL is held.
Unfortunately, as pointed out by Pablo Neira Ayuso, the PDP context list
is actually protected by the genetlink mutex. And so the condition
is incorrect.
Compile tested only.
Link: https://lore.kernel.org/ak4NgOrro-4OZjz3@chamomile
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260708-gtp-rtnl-v1-1-218091f171bc@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_psp_register() was forced to eat PSP dev registration errors as
the caller was not propagating them. Change this so PSP dev registration
failures get reported back to the caller instead.
After the recent changes in the series, PSP dev registration failures
will just leave some data structs in priv->psp (mostly counters), with
no steering rules and no means to configure them. There's no point
actively cleaning those up on failure, as they'll get removed during
profile->cleanup.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260707130858.969928-16-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
profile->enable is called before enabling an mlx5 netdevice and
currently doesn't return errors. Code called from it has to either:
1. eat errors and keep going, leaving a netdevice initialized with
missing functionality
or
2. manually clean up things that other parts of the init flow might have
set up.
Option 1 might be useful in some cases for optional functionality but
option 2 doesn't make for good design.
Add a 3rd option for code which wants to propagate errors from
profile->enable and fail netdev init. This change is a noop for now, the
first 'user' of this option 3 will be in the next patch.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260707130858.969928-15-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only create PSP steering tables when PSP configuration is enabled on a
PSP device.
Previously, mlx5e_psp_set_config (== .set_config on the PSP device) did
nothing. Steering was created and hooked up to incoming traffic at
device initialization time, via mlx5e_init_nic_rx -> mlx5e_accel_init_rx
-> mlx5_accel_psp_fs_init_rx_tables. Similarly, TX tables were created
and hooked to egress traffic at mlx5e_init_nic_tx -> mlx5e_accel_init_tx
-> mlx5_accel_psp_fs_init_tx_tables
Doing this means both ingress and egress UDP packets go through the
PSP steering tables, causing extra latency and overhead.
A better solution is to let the incoming encrypted PSP packets get
dropped by SW and not impose an overhead on all UDP packets which have
to traverse the PSP steering rules when PSP isn't used.
Additionally, upcoming changes to support HW-GRO need to reconfigure PSP
steering dynamically and this patch is a necessary step in that
direction.
Two new functions are defined:
- accel_psp_fs_create: Creates steering tables and connects RX UDP v4/v6
traffic to PSP RX tables.
- accel_psp_fs_destroy: Disconnects incoming RX traffic from PSP
steering and destroys steering tables.
PSP steering cleanup, which happens independently from PSP device
configuration, is unchanged. When the device is going away, steering
tables are destroyed as well.
The netdev lock is now used for proper synchronization between the new
set_config flow and device steering init/cleanup. This will be important
in future patches, when PSP will be able to reconfigure itself
dynamically upon netdev feature changes.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260707130858.969928-14-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PSP steering code has two dynamically allocated structures to store RX
and TX steering structs. Remove those and flatten out everything into
the parent mlx5e_psp_fs.
The tx_counter was moved out of the TX table as well, because the table
doesn't own it, it outlives TX table destruction.
All table creation/destruction now happens in
accel_psp_fs_{rx,tx}_{create,destroy}. This will be used in subsequent
patches to make PSP configuration dynamic.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260707130858.969928-13-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PSP uses a check steering table per IP version, but the PSP rules are
IP-version agnostic, so there's no point duplicating these in HW.
This commit makes the rx check steering table independent of the IP
version, with the final table added in the previous patch responsible
for directing packets to the corresponding UDP TIRs (or the TTC table
itself for non-UDP traffic).
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260707130858.969928-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Successfully decrypted PSP traffic is currently forwarded to the UDP
v4/v6 TTC default destination from its respective PSP rx_check table.
In preparation for flattening out RX steering and for decapsulation
support (which needs to handle non-UDP traffic as well), add an RX table
which directs traffic to either the UDP v4/v6 default TTC destinations,
or back to the TTC table itself for further processing. There can be no
loops as non-UDP traffic will not go through PSP processing again.
This is now used as a destination for successfully decrypted PSP
packets. The rx_counter is also incremented there, freeing the rx_check
rule for PSP_OK for atomic destination update in a future patch.
Use this opportunity to separate RX flow table levels from IPsec, as
reusing random IPsec ft levels as PSP isn't clear and now is a good
opportunity to separate them.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260707130858.969928-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rx_check ft was requesting max_fte == 2, but it created 4 entries.
While this accidentally works, it's not accurate, so change that and use
the correct number of entries. Also use an explicit drop_group for the
last match(*) drop rule.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260707130858.969928-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are multiple naming inconsistencies and the code is fragmented and
hard to follow.
For example, the PSP TX steering structure is named 'mlx5e_psp_tx', but
its RX counterpart is 'mlx5e_accel_fs_psp' and its protocol
instantiation 'mlx5e_accel_fs_psp_prot', neither of which make it clear
they relate to RX.
This commit renames things to be more consistent, realigns declarations
to abide by the xmas tree rule, and merges some functions to reduce
fragmentation. Renamed:
mlx5e_accel_fs_psp -> mlx5e_psp_rx
mlx5e_accel_fs_psp_prot -> mlx5e_psp_rx_decrypt_table
fs_prot -> decrypt
accel_psp -> rx_fs
mlx5e_psp_rx_err -> mlx5e_psp_rx_check_table
mlx5e_psp_tx -> mlx5e_psp_tx_table
def_rule -> rule
Also renamed many functions with names of the form
accel_psp_fs_A_B_C_..._verb, with A->B->C->... following a
general->specific hierarchy. Full list:
accel_psp_fs_rx_err_destroy_ft -> accel_psp_fs_rx_check_ft_destroy
accel_psp_fs_rx_err_create_ft -> accel_psp_fs_rx_check_ft_create
accel_psp_fs_rx_fs_destroy -> accel_psp_fs_rx_decrypt_ft_destroy
accel_psp_fs_rx_create_ft -> accel_psp_fs_rx_decrypt_ft_create
accel_psp_fs_tx_create_ft_table -> accel_psp_fs_tx_ft_create
accel_psp_fs_tx_destroy -> accel_psp_fs_tx_ft_destroy
accel_psp_fs_{init,cleanup}_{rx,tx} ->
accel_psp_fs_{rx,tx}_{init,cleanup}
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260707130858.969928-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PSP error flow table copies the HW syndrome to metadata register B,
but this value is never used in the RX path. Bad packets (auth fail,
bad trailer) are dropped by HW via explicit drop rules before reaching
software.
Remove the syndrome copy action, the syndrome macro, and the dead
syndrome check in the RX handler.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260707130858.969928-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
