| Age | Commit message (Collapse) | Author |
|---|
|
Implement PCI configuration space access, BAR mapping, capability
scanning (common/notify/device), and hardware queue register
definitions for DingHai PF device.
Signed-off-by: Junyang Han <han.junyang@zte.com.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add basic framework for ZTE DingHai ethernet PF driver, including
Kconfig/Makefile build support and PCIe device probe/remove skeleton.
Signed-off-by: Junyang Han <han.junyang@zte.com.cn>
Link: https://patch.msgid.link/202608021621043761zZMwCny1e6y0TRFLQHxx@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ptp_clock_adjtime() validates an ADJ_FREQUENCY request by converting the
requested scaled ppm to ppb and comparing it against ops->max_adj:
long ppb = scaled_ppm_to_ppb(tx->freq);
if (ppb > ops->max_adj || ppb < -ops->max_adj)
return -ERANGE;
scaled_ppm_to_ppb() computes (1 + ppm) * 125 >> 13 in s64. For a
sufficiently large tx->freq the multiplication overflows s64 and wraps,
so the resulting ppb can fall back within [-max_adj, max_adj] and pass
the check. The unclamped tx->freq is then handed to ->adjfine(), where
drivers scale it again (e.g. scaled_ppm * 762939453125 in ptp_idt82p33)
and program a bogus frequency word.
For example tx->freq = 147573952589676412 makes (1 + ppm) * 125 equal
2^64 + 9, which wraps to ppb == 0 and is accepted.
The caller already has write access to the PHC, so this hardens the
max_adj sanity check rather than crossing a privilege boundary, and
well-behaved user space (e.g. ptp4l) never requests such values. It is
a follow-up to commit 475b92f93216 ("ptp: improve max_adj check against
unreasonable values"), which handled the analogous s32 narrowing but not
this multiplication overflow.
Detect the overflow with check_*_overflow() and reject the request in
ptp_clock_adjtime() instead of acting on the wrapped value.
Signed-off-by: Deep Shah <deepshah146@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20260801222923.39017-2-deepshah146@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On AMD Genoa/Turin platforms the BMC-provided USB-Ethernet gadget
(American Megatrends, VID 0x046b PID 0xffb0) intermittently fails to
respond to ARP after AC cold boot. usbmon captures a stale
NETWORK_CONNECTION(off) immediately followed by
NETWORK_CONNECTION(on) on the interrupt endpoint (~130us apart)
after enumeration. Because alloc_netdev() leaves
__LINK_STATE_NOCARRIER cleared, netif_carrier_ok() returns true
when the spurious OFF arrives, so usbnet_cdc_status() cannot
recognise it as redundant and schedules EVENT_LINK_CHANGE.
__handle_link_change() then calls unlink_urbs(), killing ~60 rx
URBs whose payload has already been DMA'd into memory — xHCI trace
confirms them completing as -ECONNRESET with non-zero residual
length. rx_complete() drops these unconditionally. The following
ON restores the carrier and re-submits URBs, but the ARP reply is
already lost; the interface looks "up but silent" until ifdown/ifup.
Fix this by adding a device-specific quirk with FLAG_LINK_INTR set,
which makes usbnet_probe() call netif_carrier_off() after bind.
With initial carrier == OFF, usbnet_cdc_status() recognises the
spurious OFF as matching the current state and drops it; the
subsequent ON is the first real event and brings the link up
cleanly without ever tearing down the rx queue. The scheduled
link-change kevent is harmless because EVENT_DEV_OPEN is not yet
set at probe time.
This is applied as a device-specific quirk rather than a change to
the shared cdc_info driver_info because some CDC devices never
send NETWORK_CONNECTION notifications; forcing carrier off for
them would leave the link permanently DOWN. Restricting the change
to this VID/PID keeps that class of device untouched.
Tested on Genoa and Turin across 100+ AC cold boot cycles; ping
first-packet success rate went from intermittent to 100%.
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Link: https://patch.msgid.link/20260730051341.24930-1-guojinhui.liam@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add debugfs entry to dump host backed memory allocations for debug
purposes.
Signed-off-by: Vamsi Atluri <Vamsi.Atluri@amd.com>
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260730-upstream_v8-v12-6-136cd174ee85@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some newer AMD/Pensando cards have minimal memory and there are cases
where components, specifically in the control plane, need more memory.
This series adds support for host backed DMA memory that can be used
by the firmware for the previously mentioned cases.
Host memory allocation is best-effort: if some allocations fail, the
driver continues with whatever succeeded. Firmware gracefully degrades
when less memory is available than requested.
Signed-off-by: Vamsi Atluri <Vamsi.Atluri@amd.com>
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260730-upstream_v8-v12-5-136cd174ee85@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add detailed component information display via devlink info. This
allows users to see individual firmware components and their versions.
Components are reported as fixed, running, or stored based on their
firmware-provided flags.
Example output:
$ devlink dev info pci/0000:00:05.0
versions:
fixed:
asic.id 0x0
asic.rev 0x0
running:
fw.bootloader 1.2.3
fw.uboot 1.60.0-73
fw 1.60.0-73
fw.cpld 3.18
stored:
fw.bootloader 1.2.3
fw.uboot 1.60.0-73
fw.uboot.gold 1.50.0-22
fw.gold 1.50.0-22
fw 1.60.0-73
fw.cpld 3.18
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260730-upstream_v8-v12-4-136cd174ee85@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement PLDM FW Update in the pds_core driver using the upstream
pldmfw API. This allows updating an entire PLDM FW package at once
or updating specific firmware components by name.
Flash the entire image:
devlink dev flash pci/0000:b5:00.0 file firmware.pldmfw
Flash a specific component from the PLDM FW package:
devlink dev flash pci/0000:b5:00.0 \
file firmware.pldmfw component fw.cpld
Per-component update uses driver-defined component names (fw, fw.cpld,
etc.). Not all components support per-component update - devlink will
reject the request if the specified component cannot be updated.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260730-upstream_v8-v12-3-136cd174ee85@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new capabilities field in struct pds_core_dev_identity,
which requires bumping the identity version to 2, i.e.
PDS_CORE_IDENTITY_VERSION_2. If version 2 negotiation fails,
then quietly fall back to version 1. If version 1 negotiation
fails, then driver load will fail.
Another patch in the series will make use of the capabilities
field.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260730-upstream_v8-v12-2-136cd174ee85@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently there aren't any use-cases that require special handling
on whether or not to print devcmd failures. Specifically
non-generic failures, i.e. not supported failures. Add support to
allow these messages to be suppressed. This will be used when
adding support to negotiate PDS_CORE_IDENTITY_VERSION_2.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260730-upstream_v8-v12-1-136cd174ee85@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tja1102_p0_probe() schedules work to register the second port. That work
uses the Port 0 private data and phydev. The private data is
devm-allocated, but the driver does not wait for the pending work on
remove.
Store the Port 0 private data in phydev->priv and add a remove callback.
The callback cancels the registration work before devres teardown frees
the state.
This issue was found by a static analysis tool.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
Link: https://patch.msgid.link/20260801140643.1871-1-getshell@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pfcp_net_exit_rtnl() iterates pfcp devices whose sockets
are in the dying netns and queues them for destruction.
So the devices may reside in different netns.
Let's use unregister_netdevice_queue_net() to support per-netns
device unregistration.
list_del() is changed to list_del_init() to avoid queueing the
same device twice.
Even after pfcp_net_exit_rtnl() queues a cross-netns pfcp device,
pfcp_dellink() could be called concurrently for it (once RTNL is
removed). In such a case, __rtnl_net_unlock() will perform the
unregistration.
We can see pfcp0 below is unregistered by the per-netns work
instead of cleanup_net().
# bpftrace -e '#include <linux/netdevice.h>
kprobe:pfcp_dev_uninit {
$dev = (struct net_device *)arg0;
printf("PID: %d | DEV: %s%s\n", pid, $dev->name, kstack());
}
kprobe:pfcp_net_exit_rtnl {
printf("PID: %d%s\n", pid, kstack());
}' &
# ip netns add ns1
# ip netns add ns2
# ip -n ns1 link add pfcp0 link-netns ns2 type pfcp
# ip netns del ns2
PID: 12
pfcp_net_exit_rtnl+5
ops_undo_list+702
cleanup_net+1122
process_scheduled_works+2538
...
PID: 462 | DEV: pfcp0
pfcp_dev_uninit+5
unregister_netdevice_many_notify+7129
unregister_netdevice_many_net+1050
rtnl_net_work_func+136
process_scheduled_works+2538
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260731224406.2444121-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct pfcp_dev.net is the netns where the backend pfcp socket
resides.
struct pfcp_dev is linked to the pfcp_net.pfcp_dev_list of
the socket's netns.
During netns dismantle or module unload, pfcp_net_exit_rtnl()
iterates the list and queues devices for destruction regardless
of the devices' netns.
Thus, once RTNL is removed, the list can be modified concurrently
from different netns due to device removal.
Let's protect it with per-netns mutex.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260731224406.2444121-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dibs->lock is initialised by dibs_dev_add(), but a dibs device can
already take interrupts before that call: ism_probe() runs
ism_dev_init(), and hence request_irq(), before it calls
dibs_dev_add(). No client can have registered a dmb at that point, so
no dmb interrupt can occur, but a GID event interrupt can, and
ism_handle_irq() takes dibs->lock unconditionally on entry, before it
inspects anything else.
Initialise the lock in dibs_dev_alloc() instead, so that it is valid as
soon as a driver can publish the device to its interrupt handler.
Fixes: cc21191b584c ("dibs: Move data path to dibs layer")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Link: https://patch.msgid.link/20260730124227.167829-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
prestera_fw_hdr_parse() reads the firmware header before checking
that the firmware image contains that header.
Reject images shorter than struct prestera_fw_header before decoding the
magic and version fields.
Fixes: 4c2703dfd7fabb ("net: marvell: prestera: Add PCI interface support")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20260731141500.1-prestera-v2-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 4f61f133f354 ("net: tap: NULL pointer derefence in
dev_parse_header_protocol when skb->dev is null") fixed a crash in
tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb().
This is required because virtio_net_hdr_to_skb() may invoke
dev_parse_header_protocol(), which dereferences skb->dev. Without the
assignment, a NULL pointer dereference can occur.
However, tap_get_user_xdp() still parses the virtio-net header before
assigning skb->dev. When the vhost TX path passes an XDP buffer containing
a GSO virtio-net header but the protocol is set to zero on purpose,
tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev
is still NULL, resulting in a crash.
Fix this by looking up the tap device and assigning skb->dev before calling
tun_vnet_hdr_to_skb(), matching the ordering already used in
tap_get_user(). Preserve the existing RCU read-side critical section across
dev_queue_xmit().
Fixes: 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
Cc: stable@vger.kernel.org
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260802224612.264563-1-dongli.zhang@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a function-like macro expands to an expression, that expression
doesn't need a semicolon after it. All uses have been verified to
have their own semicolons.
This was found using the following Coccinelle semantic patch:
@r@
identifier i : script:ocaml() { String.lowercase_ascii i = i };
expression e;
@@
*#define i(...) e;
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://patch.msgid.link/20260801191002.1383835-5-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ENST start/on/off time register definitions for Q0 and Q1 are not
referenced anywhere in the driver. The driver calculates these register
addresses from the ENST base offset and the queue index instead of using
fixed defines, removing the unused macros.
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260803062834.3865755-1-vineeth.karumanchi@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that nova-core loads the TLV firmware images, update the firmware
module info to specify those files.
Also remove FIRMWARE_VERSION as it is no longer used.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260731201017.2580713-9-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Switch the FSP firmware loaders from the legacy ELF32 format to the new
TLV format. This change requires the new TLV versions of the r570.144
firmware images.
Because we are no longer loading ELF images, we can also delete the ELF
parser.
Also remove function request_firmware() as this was the last user.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260731201017.2580713-8-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Switch the generic bootloader firmware loader from the legacy binary
format to the TLV format. This change requires the new TLV versions
of the r570.144 firmware images.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260731201017.2580713-7-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Switch the GSP firmware loader from the legacy binary format to the
TLV format. This change requires the new TLV versions of the r570.144
firmware images.
Unlike the other TLV firmware images, gsp.tlv contains a pointer to
the actual GSP firmware file instead of its contents. This allows
each small gsp.tlv file to contain the distinct metadata for each GPU
while still allowing the very large gsp.bin to be shared by all
GPUs.
One key piece of metadata is the signature. The legacy GSP firmware
image is an ELF file that contains multiple sections that needed
to be parsed, and the driver needed to determine which section is
relevant for the GPU. Instead, gsp.tlv contains the pre-processed
metadata, so all the driver needs to do is to extract it.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260731201017.2580713-6-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Switch the booter firmware loader from the legacy binary format to the
TLV format. This change requires the new TLV versions of the r570.144
firmware images.
The new TLV format has all of the metadata needed by Nova encoded as
separate tags, eliminating the need to parse legacy firmware headers
such as HsHeaderV2 and HsSignatureParams. All of the structs and
code for parsing those headers is therefore deleted.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260731201017.2580713-5-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
TLV (type, length, value) files are the new image format used by Nova
to encapsulate firmware images and their metadata. Unlike the firmware
files for previous versions of the firmware, TLV filenames are not
versioned, and they have a .tlv suffix.
Add function request_tlv() to load TLV firmware images.
Add the Tlv struct and supporting types for parsing TLV firmware images.
TLV files begin with a 4-byte magic header, which must be "NVFW" for
Nvidia firmware files. This is followed by a sequence of blocks each
containing a 4-byte ASCII tag, a 4-byte little-endian length, and a
payload padded to a 4-byte boundary.
Tlv::new() validates the entire image up front, so that the iterator can
subsequently yield blocks without fallible parsing.
Also add accessor methods for the various encoded types that will be used
by the driver.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260731201017.2580713-4-ttabi@nvidia.com
[ Drop unnecessary payload.is_empty() check in Tlv::new(), use EINVAL
instead of ENODATA in Tlv::get_bytes() and add a corresponding TODO
comment. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Update conncount to use the original tuple after ct lookup to ensure
consistent counting, from Fernando F. Mancera.
2) Remove redundant net_device field in info structure that helps
parse the flowtable path discovery.
3) Move net_device to flowtable check to the flowtable discovery
path parser. This is preparation work to pass the tunnel dst_entry
via .fill_forward_path.
4) Update DSA .fill_forward_path to break at the user DSA, since
the conduit DSA is not used in the datapath. This slighly simplifies
the flowtable path discovery parser.
5) Do not advance index in the path stack prematurely, otherwise
it points to uninitialized slots on error. Not an issue currently
but it could be once tunnel dst_entry is passed via .fill_forward_path.
6) Pass the tunnel dst_entry via dev_fill_forward_path().
7) Update ipip and ip6ip6 tunnels to pass the dst_entry through
dev_fill_forward_path().
8) Call skb_valid_dst() before accessing skb_dst() to ensure dst_entry
is not a template.
9) Use UNACK timeout when RST packet does not match the expected
window while in ESTABLISHED state, the existing approach the CLOSE
state timeout which is only 10 seconds. Adopt a more conservative
timeout by default for this case.
* tag 'nf-next-26-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: conntrack: tcp: use UNACK timeout for non-closing RST packets
netfilter: nf_tables: call skb_valid_dst() before skb_dst()
netfilter: flowtable: release tunnel route on error when building forward path
net: pass dst via net_device_path in dev_fill_forward_path()
net: do not advance stack index from dev_fwd_path()
net: dsa: stop at the user device in .fill_forward_path
netfilter: flowtable: consolidate flowtable device check
netfilter: flowtable: consolidate net_device field in nft_forward_info struct
netfilter: conncount: normalize tuple and zone on successful ct lookup
====================
Link: https://patch.msgid.link/20260731153402.851224-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxl: Rename find_cxl_port() to find_cxl_port_by_dport()
cxl: Tighten CPER kfifo registration API and symbol visibility
acpi/apei/ghes: Use raw_spinlock_t for CXL CPER work locks
cxl/ras: Fix cxl_rch_get_aer_severity() wrong severity register
cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read
|
|
In eDP power-off timing specifications, T10 defines the minimum delay
required between the end of valid video data from the source and panel
power-down (main VDD off).
Currently, panel-edp only supports the 'disable' delay, which corresponds
to T9 (backlight off to end of video data) and runs in panel_edp_disable()
while video data is still active. For panels that require a delay after
video data has stopped before cutting power, this delay must occur in
panel_edp_unprepare() before turning off power rails.
Add a 'pre_unprepare' field to struct panel_delay to model T10-min, and
delay for this duration in panel_edp_unprepare() before calling
pm_runtime_put_sync_suspend().
Additionally, adjust the timing entry for TM156VDXP25 to use
delay_200_500_e80_pu100 (enable = 80ms, pre_unprepare = 100ms) to match
its panel specification, replacing the previous delay_200_500_e50_d100.
Fixes: b9e2d5cdaab0 ("drm/panel-edp: Support NV140FHM-N5B and TM156VDXP25")
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260803-edp-v1-1-3e92dec1d56c@chromium.org
|
|
find_cxl_port() and find_cxl_port_by_uport() are internal port lookup
functions that search the CXL bus by dport and uport respectively, but
their names do not make the lookup method clear.
Rename find_cxl_port() to find_cxl_port_by_dport() to make the lookup
method explicit and consistent with find_cxl_port_by_uport(). Both
functions remain static to port.c; the upcoming patch that adds the
first cross-file caller will widen their scope.
Make the same naming change to static helper __find_cxl_port_by_dport().
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Dan Williams <djbw@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jic23@kernel.org>
Link: https://patch.msgid.link/20260803221810.3685703-6-terry.bowman@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Tighten the CPER protocol error kfifo registration API and symbol
visibility.
Use EXPORT_SYMBOL_FOR_MODULES() instead of EXPORT_SYMBOL_NS_GPL() for
the CPER kfifo registration symbols. This names the consuming module
explicitly and gives compile-time enforcement.
Drop the work_struct argument from the unregister path. Change the
WARN_ONCE condition to a NULL check since there is no caller pointer
to compare against anymore.
Return void from the registration helpers whose result callers ignore.
cxl_cper_register_work() keeps its int return as the only one consumed by
a caller. Flag double registration with WARN_ONCE() inside the lock
instead of returning an error.
Change cxl_ras_init() to void because there is one consumer and one
producer so the error return was unnecessary. Remove the now-dead error
check in cxl_core_init().
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Dan Williams <djbw@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260803221810.3685703-5-terry.bowman@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The CXL CPER work registration and unregistration helpers acquire
cxl_cper_work_lock and cxl_cper_prot_err_work_lock with a spinlock
guard(), which leaves local interrupts enabled. The corresponding post
paths (cxl_cper_post_event(), cxl_cper_post_prot_err()) execute in hard
IRQ context (they are called from the GHES error notification path) and
acquire the same locks with an irqsave guard().
If a CPU is holding one of these locks via a spinlock guard() when a GHES
interrupt arrives on the same CPU, the IRQ handler spins on the held lock
waiting for it to release, while the lock holder is preempted by the IRQ.
The result is a deadlock.
Convert both locks from spinlock_t to raw_spinlock_t and use guard() at
all call sites. On PREEMPT_RT kernels spinlock_t is backed by rt_mutex and
sleeping from hard IRQ context is not permitted; raw_spinlock_t is safe in
both contexts.
Add WARN_ONCE to both register functions to surface double-registration
bugs at runtime.
Restructure both unregister functions to clear the global work pointer
under the lock before calling cancel_work_sync(), closing the window
where a CPER interrupt could schedule work on a pointer about to be
freed. Add kfifo_reset() after cancel_work_sync() so stale entries
are not replayed on next module load.
Both kfifos are single-consumer: only one work_struct is registered at
a time, enforced by the WARN_ONCE guard in the register functions.
kfifo_reset() is safe outside the lock because cancel_work_sync() has
already quiesced the consumer, and no new consumer can register until
the current module exit completes and a fresh module init runs.
Remove the redundant cancel_work_sync() call from cxl_ras_exit() and
cxl_pci_driver_exit(). The CPER unregister functions now quiesce
the work internally.
Reported-by: Sashiko <sashiko@linuxfoundation.org>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Fixes: 5e4a264bf8b5 ("acpi/ghes: Process CXL Component Events")
Fixes: 36f257e3b0ba ("acpi/ghes, cxl/pci: Process CXL CPER Protocol Errors")
Cc: stable@vger.kernel.org
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260803221810.3685703-4-terry.bowman@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
cxl_rch_get_aer_severity() classifies RCH Downstream Port uncorrectable
errors as fatal or non-fatal by ANDing uncorrectable status with
PCI_ERR_ROOT_FATAL_RCV. This is wrong because PCI_ERR_ROOT_FATAL_RCV is a
Root Error Status register bit (bit 6), not a severity bit. ANDing it
against uncorrectable status tests a reserved bit and produces incorrect
severity classification.
Fix by ANDing the unmasked uncor_status against uncor_severity. Per
PCIe Base Spec r6.0 Section 7.8.4.4, each bit in the Uncorrectable
Error Severity register indicates whether the corresponding error is
fatal (1) or non-fatal (0).
Fixes: 6ac07883dbb5 ("cxl/pci: Add RCH downstream port error logging")
Cc: stable@vger.kernel.org
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Richard Cheng <icheng@nvidia.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260803221810.3685703-3-terry.bowman@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
cxl_rch_get_aer_info() copies the RCH Downstream Port AER capability from
the RCRB MMIO block using a readl() loop bounded by sizeof(struct
aer_capability_regs). This struct is a software layout and its embedded
struct pcie_tlp_log is larger than the on-wire AER capability. As a
result the loop reads past the mapped AER register block.
The over-read also populates the software-only tail fields including
header_log.header_len. An out-of-range header_len passed to
pcie_print_tlp_log() can then loop past the header log buffer and cause
a second out-of-bounds read.
The read was correct when introduced, but struct pcie_tlp_log has since
grown (Header Log and TLP Prefix Log sizes, header_len and flit fields),
so sizeof(struct aer_capability_regs) no longer matches the physical AER
capability.
Bound the read to the physical AER registers, header through the 16 byte
Header Log. Zero the destination first so the software-only fields are
deterministic.
Fixes: 6ac07883dbb5 ("cxl/pci: Add RCH downstream port error logging")
Reported-by: Sashiko <sashiko@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260803221810.3685703-2-terry.bowman@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The TRM defines available source muxes for SPI0..SPI4 as
- b00: clk_gpll_div6_src
- b01: clk_gpll_div8_src
- b10: clk_cpll_div10_src
- b11: clk_xin_osc0_func
Which doesn't match what the current clock driver implements, making it
impossible to derive some SPI clock rates such as 37.125 MHz (which
requires clk_gpll_div8_src as the source mux).
Add a correct mux definition per TRM and point SPI0..SPI4 clocks at it.
Fixes: cc40f5baa91b ("clk: rockchip: Add clock controller for the RK3576")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260805-rk3576-spi-clk-v1-1-2f040d0d163b@flipper.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add the clock and reset controller driver for the Rockchip RV1106,
based on the vendor kernel from the Luckfox Pico SDK [1] at commit
824b817f8 (a Linux 5.10.160 kernel tree), adapted to the upstream
clock framework.
The MMC drive and sample phase clocks have their control registers in
the GRF region. The CRU provides these clocks itself, using the syscon
referenced by the rockchip,grf property as an auxiliary regmap, in the
same way as the RK3528.
The RV1103 is a package variant of the RV1106 and uses the same CRU.
[1] https://github.com/LuckfoxTECH/luckfox-pico
Signed-off-by: Simon Glass <sjg@chromium.org>
Link: https://patch.msgid.link/20260729133609.3465563-3-sjg@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
cxl/test: Assign one mock memdev a full-width serial number
cxl/core: Format the memdev serial number as unsigned in TP_printk
cxl/pmem: Format the nvdimm serial number as unsigned decimal
|
|
The CXL memdev serial number is a u64 PCIe Device Serial Number, but
the tracepoints format it with %lld. Devices whose vendor OUI sets
bit 63 therefore appear with negative serial numbers in formatted
trace output.
Note that the trace data itself is already stored correctly as u64.
Format the TP_printk serial as unsigned decimal, %llu, to match the
underlying value.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/46651395b6c1e552ae2c4fecf3058a062eb0c3f0.1784924949.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The CXL NVDIMM security passphrase key description and the nvdimm 'id'
sysfs attribute are both derived from the CXL device serial number,
but the serial number is not formatted consistently.
The key description is formatted in hexadecimal while the 'id'
attribute is formatted in decimal. As a result, ndctl stores the key
using a decimal description while the kernel later looks it up using
a hexadecimal description. For serial numbers of 10 and above, the
descriptions no longer match, preventing automatic unlock after
reboot.
The decimal formatting has a second problem: both the key description
and the 'id' attribute use the signed %lld format for a u64 PCIe
Device Serial Number. Devices whose vendor OUI sets bit 63, such as
Montage CXL devices, appear with negative decimal serial numbers.
Format the security key description and 'id' attribute as unsigned
decimal, %llu, and document that the 'id' attribute is an unsigned
decimal value.
The key lookup mismatch was exposed by CXL unit test cxl-security.sh
when cxl_test mock serial numbers were extended to 10 and above.
A work around is described for ndctl load-key users here:
https://github.com/pmem/ndctl/issues/299
Cc: stable@vger.kernel.org
Fixes: b5807c80b5bc ("cxl: add dimm_id support for __nvdimm_create()")
Acked-by: Dan Williams <djbw@kernel.org>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/2c673a5ba0a8fa93ad160578e193bd556091fa95.1784924949.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Userspace can now make use of memory protection via dmem cgroups. Let
nouveau benefit from this as well by registering the vram region with
the dmem cgroup controller.
This patch adapts the approach amdgpu and Xe have taken for enabling
dmem cgroups.
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260410081322.5577-1-natalie.vock@gmx.de
|
|
dma_req_free() acquires buf_mutex through req->map, drops the mapping
reference with kref_put(), and then dereferences req->map again to unlock
the mutex.
If kref_put() drops the last reference, mport_release_mapping() frees the
mapping, and the subsequent mutex_unlock() dereferences a freed object.
This is a use-after-free.
Fix this by caching map and md before kref_put(), clearing req->map while
holding buf_mutex, and using the cached md for mutex unlocking.
The bug is reachable from userspace via the RapidIO mport character device
interface.
Link: https://lore.kernel.org/20260723235220.588424-1-james010kim@gmail.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: James Kim <james010kim@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
alloc_skb() with the __GFP_NOFAIL flag will never return NULL, so the
subsequent NULL checks and error handling are unreachable dead code.
Remove them.
Link: https://lore.kernel.org/20260724022851.466017-7-gouhao@uniontech.com
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Cc: Bharat Potnuri <bharat@chelsio.com>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: jiazhenyuan <jiazhenyuan@uniontech.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nilay Shroff <nilay@linux.ibm.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Cc: Wentao Guan <guanwentao@uniontech.com>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kzalloc_obj with the __GFP_NOFAIL flag will never return NULL, so the
subsequent WARN_ON(!ctx) is unreachable dead code. Remove it.
Link: https://lore.kernel.org/20260724022851.466017-5-gouhao@uniontech.com
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Cc: Bharat Potnuri <bharat@chelsio.com>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: jiazhenyuan <jiazhenyuan@uniontech.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nilay Shroff <nilay@linux.ibm.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Cc: Wentao Guan <guanwentao@uniontech.com>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The Acer Nitro AN515-46 is a hybrid graphics laptop whose internal
panel is driven by the AMD GPU (Radeon 680M); the discrete NVIDIA GPU
only drives external outputs. The firmware nevertheless advertises the
NVIDIA WMI EC backlight GUID, so the backlight type resolves to
nvidia_wmi_ec. The nvidia-wmi-ec-backlight driver however fails to
probe ("EC backlight control failed: AE_NOT_FOUND") and, since the
backlight type is still nvidia_wmi_ec, amdgpu skips registering its
own backlight device. The result is no backlight device at all,
leaving the brightness keys and the desktop brightness slider
non-functional.
Booting with acpi_backlight=native makes amdgpu register its backlight
interface and brightness control works. Add a DMI quirk to use the
native backlight on this model by default.
Signed-off-by: Marcos Paulo Medeiros <maarcospm1996@gmail.com>
Link: https://patch.msgid.link/20260727132151.12792-1-maarcospm1996@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Previously, rmi_f54_buffer_queue() waited for the worker thread to
finish but ignored whether it succeeded. If the worker failed (e.g.,
due to a timeout or register read failure), the queue thread would
silently return success, delivering stale or uninitialized memory to
userspace.
Add a 'report_error' field to struct f54_data to store the worker's exit
status. Check this field in rmi_f54_buffer_queue() after the worker
finishes, and mark the buffer as VB2_BUF_STATE_ERROR if an error
occurred.
Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Reported-by: sashiko-bot@kernel.org
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260626051802.4033172-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
vfio_pci_core_map_bars() calls pci_iomap() to set up BAR resources, but not
all devices support having their BARs mapped by the CPU. The
non_mappable_bars flag indicates that a PCI device's BARs cannot be
accessed by the CPU. The ISM device on s390 is one such device. The BAR
size for an ISM device is 256 TiB, and attempting to map the BAR will lead
to warnings:
vmalloc_node_range for size 281474976714752 failed: Address range
restricted to 0x2110bab00000 - 0x21903ab00000
Use pdev->non_mappable_bars to skip pci_iomap() for such devices. This flag
is set by the PCI core at enumeration time and already serves the same
purpose in vfio_pci_probe_mmaps().
Fixes: 05f2a68b407a ("vfio/pci: Set up BAR resources and maps in vfio_pci_core_enable()")
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20260729181116.1373-1-alifm@linux.ibm.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Renesas R-Car X5H CPG DT Binding Definitions
DT bindings and binding definitions for the Renesas R-Car X5H (R8A78000)
Clock Pulse Generator (CPG), shared by driver and DT source files.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The majority of the fixes this time is for Qualcomm devicetree files,
addressing various incorrect settings in chip specific dtsi files that
prevent some feature from working correctly.
Another three such issues are addressed on the Broadcom bcm5301x and
bcm2712 SoC platforms.
Two minor issues are addressed in nuvoton and aspeed specific SoC
drivers, and the MAINTAINERS file is updated to add Billy Tsai and
Ryan Chen as aspeed reviewers as well as clarify the NXP/Freescale
entries"
* tag 'soc-fixes-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: add Ryan Chen and Billy Tsai as reviewer for ARM/ASPEED
ARM: dts: BCM5301X: EA9200: fix NVRAM size
ARM: dts: BCM5301X: fix PCIe controller 2 second interrupt
arm64: dts: qcom: eliza: Fix DSI1 phy reference clock rate
MAINTAINERS: ARM/FREESCALE: merge Layerscape entry into i.MX entry
ARM: npcm: Fix OF node refcount leaks in SMP setup
soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read
arm64: dts: broadcom: bcm2712: Remove non-functional EL2 virtual timer
arm64: dts: qcom: sdm850-lenovo-yoga-c630: lower PSCI cluster idle
arm64: dts: qcom: sc8280xp: gaokun3: correct EC interrupt pin
arm64: dts: qcom: sc8280xp: add several missing pdc map entries
arm64: dts: qcom: sm8650: Fix IPA IMEM slice
arm64: dts: qcom: monaco: Add default GIC address cells
arm64: dts: qcom: purwa: Fix GPU IOMMU property
arm64: dts: qcom: glymur: fix QUP serial engine IRQs
arm64: dts: qcom: glymur: fix PCIe SMMU interrupts
|
|
srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes
nothing to srp_process_cred_req() and srp_process_aer_req(), which read
fixed-size fields from the receive buffer without checking that those
fields were received.
The buffer size is max_ti_iu_len, which comes from the login response
and is not validated. A target that advertises 8 and then sends an
8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the
end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent
back, so those bytes reach the target. SRP_AER_REQ behaves the same way
and also reads req->lun.
The leak is 8 bytes per response. max_ti_iu_len also decides which slab
cache the buffer comes from. With 8 the buffer is a kmalloc-8 object and
the read is entirely outside it:
BUG: KASAN: slab-out-of-bounds in srp_recv_done+0x172b/0x1aa0
Read of size 8 at addr ffff888104714da8 by task kworker/u8:3/50
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of
allocated 8-byte region [ffff888104714da0, ffff888104714da8)
Without KASAN the returned bytes are whatever is next in the slab. One
run returned ".strtab".
rsp->data[3] in srp_process_rsp() has the same problem: only
resp_data_len is checked before it is read.
Drop a request that is shorter than the structure being parsed, and
check byte_len before the tsk_mgmt read.
Fixes: bb12588a38e6 ("IB/srp: Implement SRP_CRED_REQ and SRP_AER_REQ")
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Link: https://patch.msgid.link/20260729093203.1503201-1-yhlee@isslab.korea.ac.kr
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa
and then use or reference them outside the xarray lock.
erdma_destroy_qp() can drop the destroy-path reference and free QP
resources while such a lookup is in flight.
Add erdma_qp_get_by_qpn() to acquire a kref under the xarray
lock with kref_get_unless_zero(). Remove the QP from the xarray
before dropping the destroy-path reference so no new lookup can acquire
it while destruction waits for existing users.
Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://patch.msgid.link/20260730124357.12976-2-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or
error callbacks outside the xarray lock. erdma_destroy_cq() can erase the
CQ from the xarray and free its queue buffer and doorbell record while a
previously scheduled EQ handler is still using the CQ.
Add a CQ refcount and take a reference under the xarray lock with
refcount_inc_not_zero(). Remove the CQ from the xarray before dropping
the destroy-path reference, then wait for in-flight EQ users before
releasing CQ resources.
Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://patch.msgid.link/20260730124357.12976-1-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Implement UC QP creation in the RNIC HW for user API. An UC QP is exposed
as three work queues: send, receive, and memory management. The latter is
used for bind and invalidate WQEs to support memory windows.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/20260723115955.1859519-3-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
