| Age | Commit message (Collapse) | Author |
|---|
|
OpenDICE can also used on x86 platforms for attestation, one of the
usecase is Android's protected VM.
The OpenDICE device driver only supports device tree, adding ACPI
support so it can also be used on x86 environments easily.
The patch is verified using crosvm, with the following ACPI table passed
using --acpi-table, with --file-backed-mapping for the corresponding
memory region.
DefinitionBlock (
"opendice.aml", "SSDT", 2, "GOOGLE", "OpenDICE", 0x00000001
)
{
Scope (\_SB)
{
Device (DICE)
{
Name (_HID, "PRP0001")
Name (_DSD, Package () {
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {
"compatible",
Package () { "google,open-dice" }
}
}
})
Name (_CRS, ResourceTemplate () {
Memory32Fixed (ReadOnly, 0x9D1C3000, 0x00001000)
})
}
}
}
Signed-off-by: Song Guo <songguo@google.com>
Link: https://patch.msgid.link/20260715122146.4069884-4-songguo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The reserved_mem only works on device tree systems.
This commit replaced it by phys_addr_t and resource_size_t to make it
possible to use open dice on non-DT platforms.
Signed-off-by: Song Guo <songguo@google.com>
Link: https://patch.msgid.link/20260715122146.4069884-3-songguo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dev->of_node is not null only when the device is configured via device
tree. When the matching device is configured by other means (like ACPI),
the current code will cause null pointer dereference.
Signed-off-by: Song Guo <songguo@google.com>
Link: https://patch.msgid.link/20260715122146.4069884-2-songguo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a mutex and take it around SBTSI read/write paths so that only
one transaction runs at a time. The lock is held only for the
duration of the bus transfer and associated driver bookkeeping, not
across blocking work unrelated to SBTSI.
This is a concurrency hardening fix.
Reviewed-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Prathima <Prathima.Lk@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260710111642.850022-8-Akshay.Gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Implement IOCTL interface for SB-TSI driver to enable userspace access
to TSI register read/write operations through the AMD Advanced Platform
Management Link (APML) protocol.
Add an ioctl command (SBTSI_IOCTL_REG_XFER_CMD) that accepts a register
address, data byte, and direction flag.
The mutex is taken on the ioctl path here; the hwmon path is placed
under the same lock in the next patch, which completes serialization between
the hwmon and ioctl paths.
Reviewed-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Prathima <Prathima.Lk@amd.com>
Link: https://patch.msgid.link/20260710111642.850022-7-Akshay.Gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
AMD SB-TSI temperature sensors can be accessed over both
I2C and I3C buses depending on the platform configuration.
Extend the SB-TSI driver to support both I2C and I3C bus interfaces
by selecting the appropriate transport based on the probed bus type.
The driver maintains backward compatibility with existing I2C
deployments while enabling support for systems using the I3C bus.
Register both I2C and I3C drivers using module_i3c_i2c_driver() and
update the Kconfig dependency from I2C to I3C_OR_I2C.
Reviewed-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Prathima <Prathima.Lk@amd.com>
Link: https://patch.msgid.link/20260710111642.850022-6-Akshay.Gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refactor shared probe procedures into sbtsi_probe_common() to ensure
that I2C and I3C probes focus solely on bus-specific allocation and
device configuration.
The utility function reads the configuration register via sbtsi_xfer(),
initializes ext_range_mode and read_order, assigns the driver data,
and registers the hwmon auxiliary device.
Routing register access through sbtsi_xfer() keeps the probe path
bus-agnostic, so no transfer logic has to be duplicated when SB-TSI over
I3C support is added in a later patch.
Reviewed-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Prathima <Prathima.Lk@amd.com>
Link: https://patch.msgid.link/20260710111642.850022-5-Akshay.Gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the I2C read/write byte operations from the sbtsi hwmon driver into
a common sbtsi_xfer() function in tsi-core.c.
This decouples the hwmon sensor driver from the underlying bus transport,
preparing for I3C support in a subsequent patch.
This patch does not introduce any functional changes. The updates are
limited to code organization/cleanup and should not affect the runtime
behavior of the driver
Reviewed-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Prathima <Prathima.Lk@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260710111642.850022-4-Akshay.Gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Extract the paired integer/decimal register reads and writes from the
hwmon read/write callbacks into sbtsi_temp_read() and sbtsi_temp_write()
helpers. This consolidates error handling and respects the ReadOrder bit
for atomic temperature latching.
This keeps register access independent while preserving existing hwmon
functionality.
Reviewed-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Prathima <Prathima.Lk@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260710111642.850022-3-Akshay.Gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move SBTSI(Side-Band Temperature Sensor Interface) core functionality out
of the hwmon-only path and into drivers/misc/amd-sbi so it can be reused
by non-hwmon consumers.
I2C probe parsing is moved from drivers/hwmon/sbtsi_temp.c
into drivers/misc/amd-sbi/tsi.c under CONFIG_AMD_SBTSI. The core driver
stores struct sbtsi_data on the bus device and registers an auxiliary
device amd-sbtsi.temp-sensor.<addr> per target.
The current hwmon temp sensor will now require the CONFIG_AMD_SBTSI
configuration as a new dependency.
This split prepares the driver for additional interfaces while keeping
hwmon support in hwmon subsystem on top of common SBTSI core logic.
Add platform dependencies to clarify this driver is intended to run on
the BMC and not on the managed node.
Reviewed-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Prathima <Prathima.Lk@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260710111642.850022-2-Akshay.Gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Switch from pci_enable_device() to pcim_enable_device() so the PCI device
is automatically disabled on probe error and driver removal. Drop the now
redundant manual pci_disable_device() and pci_clear_master() calls, since
pcim's release path clears bus mastering and disables the device.
Assisted-by: opencode:hy3-free
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260714025025.2055506-1-rosenp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add two checks for devm_kasprintf() errors in create_misc_rmi_device(),
returning -ENOMEM if the function failed.
Assisted-by: gkh_clanker_t1000
CC: Arnd Bergmann <arnd@arndb.de>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
CC: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Link: https://patch.msgid.link/20260709132052.211683-1-griffin@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gru_retry_exception() tests cbrexecstatus after asking
gru_get_cb_exception_detail() to fill the detail structure. The helper
leaves that field uninitialized, so retry decisions depend on stale
stack data.
Populate the address, CBR state, and execution status alongside the
other exception fields, matching the user exception-detail path.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260630104941.53862-1-alhouseenyousef@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
genwqe_setup_sgl() uses zero as the initial previous DMA address. DMA
address zero is valid, so a first entry at that address enters the
merge path before last_s has been assigned and dereferences NULL.
Only merge adjacent mappings after an SGL data entry has been created.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260630104923.53827-1-alhouseenyousef@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The LDPC code register helpers check the target MMIO address after
adding code_id * XSDFEC_LDPC_REG_JUMP to the register base. code_id is
supplied through the ioctl path, so the multiplication and addition can
wrap before the bounds check.
Validate the code_id against the register window size before computing
the final address, then write using the checked address.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Reviewed-by: Cvetic, Dragan <dragan.cvetic@amd.com>
Link: https://patch.msgid.link/20260629152857.13553-1-alhouseenyousef@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
lan966x_pci_probe() applies a device-tree overlay and then populates
platform children from the overlaid node. If
of_platform_default_populate() creates some children and then fails, the
current error path only unloads the overlay.
Depopulate the children before unloading the overlay on that failure
path, matching the remove path order.
Fixes: 185686beb464 ("misc: Add support for LAN966x PCI device")
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260623015248.22721-1-pengpeng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ad_dpot_probe() creates per-RDAC sysfs files manually and then
optionally creates the command sysfs group. This leaves probe responsible
for rolling back partial sysfs state and makes remove responsible for
matching every file that probe created.
Move the device attributes into driver core dev_groups for the I2C and
SPI drivers and use an is_visible() callback to expose only the
attributes supported by the probed device. With this shape, the driver
core creates the sysfs files only after probe succeeds and removes them
before the remove callback frees the driver data.
Fixes: 4eb174bee6f8 ("ad525x_dpot: new driver for AD525x digital potentiometers")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260623015643.36508-1-pengpeng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dev_of_node() returns the device's OF node without taking a new
reference. rp1_probe() stores that borrowed pointer in rp1_node, but
drops it with of_node_put() on both success and failure paths.
Dropping a reference that was never acquired can underflow the node's
refcount and leave later users with a stale OF node. Remove the
of_node_put() calls and keep rp1_node as a borrowed pointer.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://patch.msgid.link/20260616150802.52050-1-pengpeng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rp1_probe() installs a chained handler for each parent MSI-X vector and
stores the rp1 device pointer as handler data. rp1_unregister_interrupts()
then disposes the child IRQ mappings, removes the IRQ domain, and frees
the PCI IRQ vectors without first removing those chained handlers.
If a teardown path runs after the handlers have been installed, a later
parent IRQ can still call rp1_chained_handle_irq() with stale handler
data and a removed IRQ domain. Clear the chained handlers before
disposing mappings and freeing the vectors.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://patch.msgid.link/20260616151028.69890-1-pengpeng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ibmvmc_recv_msg() trusts the message length from the CRQ.
It passes that length directly to h_copy_rdma().
The destination buffer is only max_mtu bytes.
A larger length can overrun it before userspace reads the message.
Validate the CRQ length before issuing the RDMA copy.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260624175139.7981-1-alhouseenyousef@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ibmvmc_get_valid_hmc_buffer() marks the selected send buffer busy before
ibmvmc_write() validates the backing storage or copies data from user
space. Error exits after that point leave the buffer permanently busy.
Keep the buffer pointer until ownership is handed to the hypervisor, and
mark it free again on local write failures. Also report an RDMA send
failure instead of returning a successful byte count.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260624185925.2133-1-alhouseenyousef@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ilo_pkt_dequeue() trusts descriptor IDs and lengths read from the shared
FIFO entry. A bad entry can select a descriptor outside the allocated
queue memory or report a packet length larger than one descriptor.
Reject entries whose descriptor index or packet length exceeds the queue
layout before deriving the packet pointer returned to read and write
paths.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260624190919.3432-1-alhouseenyousef@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If an error occurs at the stage of working with registers in conjunction
with MCU_Block, it will not be processed.
The occurrence of errors at this stage may signal an impact on writes to
the device's PCI registers and is a more global problem than a
driver-level security problem, but adding a handler would be a good
practice.
Add a missing error handling.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c0e5f4e73a71 ("misc: rtsx: Add support for RTS5261")
Signed-off-by: Gleb Markov <markov.gi@npc-ksb.ru>
Link: https://patch.msgid.link/20260629130920.1260-1-markov.gi@npc-ksb.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bcm_vk_write() uses the user-supplied write count to size a
flexible-array work entry and then copies count bytes into that array.
The allocation expression is evaluated before any overflow check, so a
very large count can wrap the allocation smaller than the subsequent
copy.
Reject empty writes, check the allocation arithmetic before kzalloc(),
and initialize the __counted_by field before copying into to_v_msg[].
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Link: https://patch.msgid.link/20260629160605.29412-1-alhouseenyousef@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
nsm_sendrecv_msg_locked() stores the virtqueue used-ring length reported
by the NSM device into msg->resp.len without bounding it to the response
buffer. A malicious or buggy backend can report a length larger than the
response buffer; parse_resp_raw() then copies that many bytes out of the
fixed buffer to user space, disclosing adjacent kernel heap (an
out-of-bounds read). The request path already floors its length in
fill_req_raw(); the response path lacks the symmetric check.
Clamp the stored length to the size of the response buffer. Well-behaved
devices report no more than the posted buffer size, so conforming traffic
is unaffected.
Fixes: b9873755a6c8 ("misc: Add Nitro Secure Module driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Alexander Graf <graf@amazon.com>
Link: https://patch.msgid.link/20260620-b4-disp-a54b7dd6-v1-1-79d1f236a854@proton.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
sizeof used without parentheses around its operand on two
occasions in r_heartbeat.c. Add them to comply with the
kernel coding style.
Signed-off-by: Batu Ada Tutkun <batuadatutkun@gmail.com>
Link: https://patch.msgid.link/20260622201633.2577-1-batuadatutkun@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
nsm_dev_ioctl() jumps to the common out label when the initial
copy_from_user() fails. That failure path runs before
mutex_lock(&nsm->lock), but the out label unconditionally calls
mutex_unlock(&nsm->lock).
Return -EFAULT directly for the pre-lock copy_from_user() failure so
only paths that acquired the mutex release it.
Signed-off-by: Vu Nguyen Anh Khoa <khoavna.tin.2225@gmail.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260621085743.76329-2-khoavna.tin.2225@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While the sizeof the target buffer is (should be) ENCLOSURE_NAME_SIZE
and the copies should not overrrun this stops any static analysis objecting
to the unbounded strcpy() and strcat() calls
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260608095523.2606-18-david.laight.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bcm_vk_sync_msgq() fills the message queue information and then sets
msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the
message queues and their cached queue information.
atomic_set()/atomic_read() do not order those accesses. A reader can see
msgq_inited set while still seeing stale queue information. Use release
when publishing the initialized queues and acquire when checking the gate.
Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the
gate and does not publish queue state to readers.
Fixes: 111d746bb476 ("misc: bcm-vk: add VK messaging support")
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://patch.msgid.link/20260603021127.3285057-1-hanguidong02@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The comment in pch_phub_write_gbe_mac_addr() suggests that only EG20T,
ML7831 and ML7223 are handled. Replace the code construct using an if
with a switch that has the same semantics but issues a warning if a new
device type is added to the driver without adapting this function.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/796b3667ea49d9156ecc03d1ce9668972316d90b.1779785111.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit d14b649fd99f ("misc: pch_phub: Drop two unused functions")
all the register values in struct pch_phub_reg are unused. Drop them.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/459d402dad63a6cc0e230b6f2305556bb915579c.1779785111.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Recently an enum was introduced to identify the different hardware
variants instead of magic constants. The respective commit however
missed to adapt one code location that still checks the old values.
As the values shifted by one this is a relevant fix.
Fixes: 7b1d4ad96ea4 ("misc: pch_phub: Introduce an enum for device indentification")
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/8a97d9d5fb0a4abf7032324643e3e2337b1347bd.1779785111.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the ISSEI (Intel Silicon Security Engine Interface)
HECI PCI devices.
Add the necessary PCI handling routines, hardware definitions,
register mappings and hardware access routines.
This enables the communication via HECI PCI device advertized by BIOS.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Co-developed-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260513-issei-for-upstream-v1-4-f590038678f9@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce the main thread and HECI Active Management (HAM)
message handling for the ISSEI (Intel Silicon Security Engine
Interface) subsystem.
The main thread is responsible for managing the reset flow and
processing messages, while the HAM message handling is crucial
for initializing communication with the firmware and managing
clients.
With this implementation, the ISSEI driver is capable of performing
the required initialization and management of communication between
the host and the firmware.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Co-developed-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260513-issei-for-upstream-v1-3-f590038678f9@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the core implementation for firmware and host client
management within the ISSEI (Intel Silicon Security Engine Interface)
subsystem support for a character device to expose the ISSEI
HECI interface to user space.
The firmware client (fw_client) and host client (host_client) modules
are responsible for managing communication between the host software
and the firmware.
The character device provides a communication channel for user-space
applications to interact with the firmware on the platform.
The client modules enable the ISSEI driver to manage multiple
host clients communicating with corresponding firmware
clients, facilitating data transfers and control operations
over the HECI interface.
The character device allows user-space applications to establish
connections to firmware clients using UUIDs, exchange messages,
and control the communication flow using standard
file operation calls.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Co-developed-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260513-issei-for-upstream-v1-2-f590038678f9@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ISSEI (Intel Silicon Security Engine Interface)
subsystem provides a communication channel between the host and the
Silicon Security Engine.
Prepare basic driver functions and character device
for user-space communication.
Add DMA access routines for ISSEI HECI devices.
Add of DMA-related structures and implementation of routines for
setting up DMA, as well as reading and writing DMA buffers.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Co-developed-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260513-issei-for-upstream-v1-1-f590038678f9@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a couple of functions code can be made cleaner with help of
__free() macro. Refactor these to use RAII approach.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260611203537.1786399-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When iterate over children of a fwnode that has a secondary fwnode,
fwnode_get_next_child_node() can enter an infinite loop if the secondary
fwnode has more than one child.
Parent Child
(Primary fwnode) FWa: {FWa1, FWa2, FWa3}
(Secondary fwnode) FWb: {FWb1, FWb2}
In this case:
┌─> fwnode_get_next_child_node(FWa, FWa1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2
│
│ ...
│
│ fwnode_get_next_child_node(FWa, FWa3)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL
│ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1
│
│ fwnode_get_next_child_node(FWa, FWb1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1
└────┘
This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly
output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}.
The root cause is that when the current child (FWb1) belongs to the
secondary fwnode, calling get_next_child_node() on the parimary fwnode
incorrectly returns the first child (FWa1) again instead of NULL.
Fix this by dynamically checking the parent fwnode of the current child
before calling get_next_child_node(). This approach follows the pattern
established in commit b5b41ab6b0c1 ("device property: Check
fwnode->secondary in fwnode_graph_get_next_endpoint()").
Fixes: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260611203537.1786399-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "Fixed dependency cycle(s) with ..." log is printed for each cycle
finding process. In particular, the same cycle may be parsed many times
during the proxy link setup. For example, if /soc/bus@4c000000/usb@4c100000
is a devicetree structure and node usb@4c100000 is in a cycle, then for
each device registration (soc, 4c000000.bus and 4c100000.usb),
fw_devlink_create_devlink() will find the same cycle and print a log.
The repeat logs are redundant and may cause confusion for the user. Move
the pr_debug() to __fwnode_link_cycle() and avoid printing the log if it
has already been printed.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260509111728.4123331-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The at803x family of devices are subjected to an errata that requires
hard-reseting the PHY upon link change.
That can only work if there's a physical reset line wired to the PHY,
which the driver checks by looking if there's a reset GPIO configured
for the MDIO device.
The reset may however be controlled through a reset controller, which
isn't accounted for in the errata handling.
Besides that, PHY drivers aren't expected to directly access the
mdiodev's resources directly, let's therefore wrap this with a phylib
helper, that uses a similar mdio helper to check for reset existence.
This was found in preparation for bus-level resource management for
better mdio scan support.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260715101355.88536-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> says:
Currently only devicetree systems have their devices' probe ordered
against their suppliers automatically by fw_devlink. Software nodes have
lately been used extensively treewide to describe references to resource
suppliers: most notably, the GPIO subsystem uses it in many places. Now
that the conversion of "dangling" GPIO chip software nodes to using real
links is almost done, it makes sense to ensure no needless probe
deferrals by implementing the add_links() callback from the fwnode
interface.
This series extends software node support to use fw_devlink and adds test
coverage for the new behaviour.
Caveats: a supplier software node must be registered before the consumer
device is added, If the swnode is registered after the consumer was added,
add_links() has already run and set FWNODE_FLAG_LINKS_ADDED, so the late
supplier is missed. Graph/remote- endpoint ordering is left out for now as
well as there are no known users.
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-0-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add callback function for the pci_driver / sriov_configure.
It asks the NIC to provide certain number of VFs, or disable
VFs if the request is zero.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260710192735.2921300-1-haiyangz@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The commit that fixes BINDER_GET_EXTENDED_ERROR changed the condition
for printing transaction failures so errors are printed even if the
cause is a dead or frozen process. Undo this change so that the error
is only printed if the failure has an errno associated with it.
Cc: stable@kernel.org
Fixes: 77bfebf11077 ("rust_binder: fix BINDER_GET_EXTENDED_ERROR")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260708-get-extended-error-fix-printing-v1-1-6e293b213b70@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All types in `bindings` implement `Zeroable` if they can. This enables
using `pin_init::zeroed()` for `file_operations` initialization instead
of relying on `unsafe { core::mem::MaybeUninit::zeroed().assume_init() }`.
This change improves readability and removes an unnecessary unsafe
block.
Link: https://github.com/Rust-for-Linux/linux/issues/1189
Suggested-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
Link: https://patch.msgid.link/20260702205803.552476-1-nico.antinori.7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- Define `DeferWorks(u8)` and `DeferWork` enum using `bit_u8` offsets.
- Change `ProcessInner.defer_work` type from `u8` to `DeferWorks`.
- Update `Process::release()` and `Process::flush()` to check for empty
states using `DeferWorks::empty()`.
- Update the workqueue runner to inspect flags using `.contains()`.
Signed-off-by: Jahnavi MN <jahnavimn@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260716-b4-rust_binder_impl_flags-v1-1-b4201d3f15b3@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Most processes do not use Rust Binder with epoll, so avoid paying the
synchronize_rcu() cost in drop for those that don't need it. For those
that do, we also manage to replace synchronize_rcu() with kfree_rcu(),
though we introduce an extra allocation.
In case the last ref to an Arc<Thread> is dropped outside of
deferred_release(), this also ensures that synchronize_rcu() is not
called in destructor of Arc<Thread> in other places. Theoretically that
could lead to jank by making other syscalls slow, which would be
problematic.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260707-upgrade-poll-v6-2-4b8fae7bf1d9@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Android Binder driver supports a netlink API that reports
transaction *failures* to a userspace daemon. This allows devices to
monitor processes with many failed transactions so that it can e.g. kill
misbehaving apps.
One very important thing that this monitors is when many oneway messages
are sent to a frozen process, so there is special handling to ensure
this scenario is surfaced over netlink.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260707-binder-netlink-v7-3-42b40e4b1ac8@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds dynamic debug logs for:
- Releasing active transactions during thread stack unwinding.
- Discarded transaction error codes when a thread exits.
- Undelivered transaction acknowledgments (TRANSACTION_COMPLETE)
upon thread exit.
- Undelivered process death and freeze notifications when processes
exit or die.
- Undelivered transactions canceled due to target process death.
We now store the process PID in `ThreadError`, `DeliverCode`, and
`FreezeMessage` to ensure the correct PID is logged on cancellation.
This is necessary because `cancel()` runs from background `kworkers`,
which would otherwise print the wrong PID.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Jahnavi MN <jahnavimn@google.com>
Link: https://patch.msgid.link/20260716-rust_binder_debug_mask-v4-7-3d7436c2d2f2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds dynamic debug logs for:
- Memory allocation (OOM) failures when requesting
death notifications
- Registration and cancellation lifecycle events
(BC_REQUEST / BC_CLEAR)
- Delivery of death notification events to userspace
(BR_DEAD_BINDER)
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Jahnavi MN <jahnavimn@google.com>
Link: https://patch.msgid.link/20260716-rust_binder_debug_mask-v4-6-3d7436c2d2f2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds dynamic debug logs for:
- Failed replies, target process deaths, and error code deliveries.
- Detailed transaction failure diagnostics (including sender/receiver
PIDs, TIDs, transaction IDs, buffer sizes, and error codes).
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Jahnavi MN <jahnavimn@google.com>
Link: https://patch.msgid.link/20260716-rust_binder_debug_mask-v4-5-3d7436c2d2f2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
