| Age | Commit message (Collapse) | Author |
|---|
|
This adds support for using HCI_LE_Set_Host_Feature [v2] instead of v1
if LL Extented Features is supported and the controller supports the
command.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Revalidate bridge ports, add missing NULL checks to fetch the bridge
device by the port. From Florian Westphal.
2) Fix netdevice refcount leak in the error path of nft_fwd hardware
offload function, also from Florian.
3) Unregister helper expectfn callback on conntrack helper module
removal, otherwise dangling pointer remains in place,
from Weiming Shi.
4) Fix possible pointer infoleak in getsockopt() IPT_SO_GET_ENTRIES,
From Kyle Zeng.
5) Validate that device MAC header is present before nf_syslog
accesses it. From Xiang Mei.
6-8) Three patches to address a possible infoleak of stale stack
data in three nf_tables expressions, due to mismatch in the
_init() and _eval() function which is possible since 14fb07130c7d.
From Davide Ornaghi and Florian Westphal.
netfilter pull request 26-06-10
* tag 'nf-26-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
netfilter: nf_log: validate MAC header was set before dumping it
netfilter: x_tables: avoid leaking percpu counter pointers
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
netfilter: nf_tables_offload: drop device refcount on error
netfilter: revalidate bridge ports
====================
Link: https://patch.msgid.link/20260610161629.214092-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
NAT helpers such as nf_nat_h323 store a raw pointer to module text in
exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister()
only unlinks the callback descriptor and never walks the expectation table,
so an expectation pending at module removal survives with a dangling
exp->expectfn into freed module text.
When the expected connection arrives, init_conntrack() invokes
exp->expectfn(), now a stale pointer into the unloaded module. Reproduced
on a KASAN build by loading the H.323 helpers, creating a Q.931
expectation, unloading nf_nat_h323, then connecting to the expected port:
Oops: int3: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:0xffffffffa06102d1
init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862)
nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049)
ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223)
nf_hook_slow (net/netfilter/core.c:619)
__ip_local_out (net/ipv4/ip_output.c:120)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1715)
tcp_connect (net/ipv4/tcp_output.c:4374)
tcp_v4_connect (net/ipv4/tcp_ipv4.c:345)
__sys_connect (net/socket.c:2167)
Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323]
Reaching the dangling state requires CAP_SYS_MODULE in the initial user
namespace to remove a NAT helper that still has live expectations, so this
is a robustness fix; leaving an expectation pointing at freed text is wrong
regardless.
Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and
drops every expectation whose ->expectfn matches the descriptor being torn
down. Call it from each NAT helper's exit path after the existing RCU grace
period, so no expectation outlives the code it points at and no extra
synchronize_rcu() is introduced. With the fix, the same reproducer runs to
completion without the Oops.
Fixes: f587de0e2feb ("[NETFILTER]: nf_conntrack/nf_nat: add H.323 helper port")
Reported-by: Xiang Mei <xmei5@asu.edu>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Quite a few last updates, notably:
- b43: new support for an 11n device
- mt76:
- mt792x broken usb transport detection
- mt7921 regd improvements
- mt7927 support
- iwlwifi:
- more kunit tests
- FW version updates
- ath12k: WDS support
- rtw89:
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations
- cfg80211/mac80211:
- update UHR to D1.4, UHR DBE support
- finally remove 5/10 MHz support
- S1G rate reporting
- multicast encapsulation offload
* tag 'wireless-next-2026-06-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (285 commits)
b43: add RF power offset for N-PHY r8 + radio 2057 r8
b43: add channel info table for N-PHY r8 + radio 2057 r8
b43: add IPA TX gain table for N-PHY r8 + radio 2057 r8
b43: support radio 2057 rev 8
b43: route d11 corerev 22 to 24-bit indirect radio access
b43: add d11 core revision 0x16 to id table
b43: add firmware mappings for rev22
rfkill: Replace strcpy() with memcpy()
wifi: brcmfmac: flowring: simplify flow allocation
wifi: brcm80211: change current_bss to value
wifi: ath12k: enable IEEE80211_VHT_EXT_NSS_BW_CAPABLE when NSS ratio is reported
wifi: ath12k: fix EAPOL TX failure caused by stale tcl_metadata bits
wifi: ath: Update copyright in testmode_i.h
wifi: ath10k: Update Qualcomm copyrights
wifi: ath11k: Update Qualcomm copyrights
wifi: ath12k: Update Qualcomm copyrights
wifi: mt76: Drop unneeded mt76_register_debugfs_fops() return checks
wifi: mt76: mt7921: assert sniffer on chanctx change
wifi: mt76: mt7996: fix potential tx_retries underflow
wifi: mt76: mt7925: fix potential tx_retries underflow
...
====================
Link: https://patch.msgid.link/20260610103637.179340-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an 802.3ad (LACP) bonding interface has no slaves in the
collecting/distributing state, the bonding master still reports
carrier as up as long as at least 'min_links' slaves have carrier.
In this situation, only one slave is effectively used for TX/RX,
while traffic received on other slaves is dropped. Upper-layer
daemons therefore consider the interface operational, even though
traffic may be blackholed if the lack of LACP negotiation means
the partner is not ready to deal with traffic.
Introduce a configuration knob to control this behavior. It allows
the bonding master to assert carrier only when at least 'min_links'
slaves are in Collecting_Distributing state.
The default mode preserves the existing behavior. This patch only
introduces the knob; its behavior is implemented in the subsequent
commit.
Fixes: 655f8919d549 ("bonding: add min links parameter to 802.3ad")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260603150331.1919611-4-louis.scalbert@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership.
Fixes: 8605330aac5a ("tcp: fix SCM_TIMESTAMPING_OPT_STATS for normal skbs")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260607021819.49698-1-kylebot@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mana_query_link_cfg() sends an HWC command to firmware on every call,
but the link speed and QoS values it returns only change when the
driver explicitly calls mana_set_bw_clamp(). This function is called
not only by userspace via ethtool get_link_ksettings, but also
periodically by hv_netvsc through netvsc_get_link_ksettings and by
the sysfs speed_show attribute via dev_attr_show, resulting in
unnecessary HWC traffic every few minutes.
Add a link_cfg_error field to mana_port_context to cache the query
result. The field uses three states: 1 (not yet queried, initial
value set during mana_probe_port), 0 (success, speed/max_speed are
valid), or a negative errno for permanent errors like -EOPNOTSUPP
when the hardware does not support the command. Transient errors and
qos_unconfigured responses are not cached so that subsequent calls
will retry.
MANA is ops-locked because it implements net_shaper_ops, so the core
already takes netdev_lock() around all ethtool_ops and net_shaper_ops
entry points. Reuse that lock to serialize mana_query_link_cfg() and
mana_set_bw_clamp(). This prevents a concurrent mana_set_bw_clamp()
from racing with an in-flight query and publishing stale pre-clamp
speed/max_speed.
Invalidate the cache inside mana_set_bw_clamp() on success, so all
current and future callers that change the link configuration
automatically trigger a fresh query on the next mana_query_link_cfg()
call. Also reset link_cfg_error during resume in mana_probe() under
netdev_lock(), so that any query already in flight cannot later
store 0 and silently overwrite the post-resume invalidation.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260606133301.2180073-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the device id table to include the new device id 0x00C1.
This device's BAR layout is similar to VF's, update the function,
mana_gd_init_registers(), accordingly.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260605212302.2135499-1-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the GIC functions to allocate interrupt contexts for RDMA EQs. These
interrupt contexts may be shared with Ethernet EQs when MSI-X vectors
are limited.
The driver now supports allocating dedicated MSI-X for each EQ. Indicate
this capability through driver capability bits. The RDMA EQs pass
use_msi_bitmap=false to share MSI-X vectors with Ethernet, while the
capability flag advertises that the driver supports per-vPort EQ
separation when hardware has sufficient vectors.
Populate eq.irq on all RDMA EQs for consistency with the Ethernet path.
Also relocate the GDMA_DRV_CAP_FLAG_1_HW_VPORT_LINK_AWARE define to its
numeric BIT(6) position among the other capability flags.
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Leon Romanovsky <leon@kernel.org>
Link: https://patch.msgid.link/20260605005717.2059954-7-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use GIC functions to create a dedicated interrupt context or acquire a
shared interrupt context for each EQ when setting up a vPort.
The caller now owns the GIC reference across the EQ create/destroy
lifecycle: mana_create_eq() calls mana_gd_get_gic() before creating
each EQ and mana_destroy_eq() calls mana_gd_put_gic() after destroying
it. The msix_index invalidation is moved from mana_gd_deregister_irq()
to the mana_gd_create_eq() error path so that mana_destroy_eq() can
read the index before teardown.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-6-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To allow Ethernet EQs to use dedicated or shared MSI-X vectors and RDMA
EQs to share the same MSI-X, introduce a GIC (GDMA IRQ Context) with
reference counting. This allows the driver to create an interrupt context
on an assigned or unassigned MSI-X vector and share it across multiple
EQ consumers.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-4-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When querying the device, adjust the max number of queues to allow
dedicated MSI-X vectors for each vPort. The per-vPort queue count is
clamped towards MANA_DEF_NUM_QUEUES but will not exceed the hardware
maximum reported by the device.
MSI-X sharing among vPorts is enabled when there are not enough MSI-X
vectors for dedicated allocation, or when the platform does not support
dynamic MSI-X allocation (in which case all vectors are pre-allocated
at probe time and sharing is always used). The msi_sharing flag is
reset at the top of mana_gd_query_max_resources() so it is recomputed
from current hardware state on each probe or resume cycle.
Clamp apc->max_queues to gc->max_num_queues_vport in mana_init_port()
so that on resume, if max_num_queues_vport has decreased due to fewer
MSI-X vectors, num_queues is reduced accordingly before EQ allocation.
A device reporting zero ports now results in a fatal probe error since
the per-vPort MSI-X math requires at least one port.
Rename mana_query_device_cfg() to mana_gd_query_device_cfg() as it is
used at GDMA device probe time for querying device capabilities.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-3-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To prepare for assigning vPorts to dedicated MSI-X vectors, remove EQ
sharing among the vPorts and create dedicated EQs for each vPort.
Move the EQ definition from struct mana_context to struct mana_port_context
and update related support functions. Export mana_create_eq() and
mana_destroy_eq() for use by the MANA RDMA driver.
RSS QPs now take a vport reference via pd->vport_use_count to ensure
EQs outlive all QP consumers. The vport must already be configured by
a raw QP before an RSS QP can be created. EQs are only destroyed when
the last QP (raw or RSS) on the PD releases its reference.
Restrict each vport to a single RSS QP. The hardware only supports one
steering configuration (indirection table / hash key) per vport, and
mana_disable_vport_rx() on QP destroy disables RX globally for the
vport. Previously, creating a second RSS QP would silently overwrite
the first QP's steering config and destroy would blackhole all traffic.
This is now explicitly rejected with -EBUSY. Existing applications
(DPDK being the primary RDMA consumer) always create one RSS QP per
vport, so no real-world flows are affected.
Reject cross-port PD sharing for both raw and RSS QPs. Since EQs and
vport configuration are per-port, a PD is bound to the port used by
its first raw QP. Subsequent QPs on the same PD must use the same
port or the creation fails with -EINVAL. Previously this was silently
broken: with shared EQs it appeared to work, but with per-vPort EQs
a cross-port PD would cause wrong-port EQ teardown and corruption.
DPDK creates one PD per port so no existing flows are affected.
Serialize mana_set_channels() and the async per-port queue reset
handler against RDMA vport configuration to prevent RDMA from claiming
the vport during the detach/attach window. A channel_changing flag is
set under apc->vport_mutex before detach and checked by
mana_cfg_vport() when called from the RDMA path, blocking RDMA from
grabbing the vport during the entire window. When the port is down
and RDMA already holds the vport, the channel change is rejected with
-EBUSY.
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260605005717.2059954-2-longli@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While NET_NCSI not enabled, ncsi_stop_dev() is not inline
and call with it, casue compile waring:
linux/include/net/ncsi.h:63:13: warning: 'ncsi_stop_dev'
defined but not used [-Wunused-function]
static void ncsi_stop_dev(struct ncsi_dev *nd)
Setting ncsi_stop_dev() to inline like other function to
remove compile warnings.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Link: https://patch.msgid.link/20260605033607.37630-1-minda.chen@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev->hwprov tracks the active hwtstamp provider for the device.
Make it ops protected (instance lock if the netdev driver opts
into holding instance lock around callbacks, otherwise rtnl_lock).
hwprov is written and read in:
- drivers/net/phy/phy_device.c
phydev and ops protection don't currently mix, add a comment
- net/ethtool/
as of now holds both rtnl lock and ops lock, this one will
soon only hold one lock or the other
read in:
- net/core/dev_ioctl.c
holds both rtnl lock and ops lock
- net/core/timestamping.c
RCU reader
The new netdev_ops_lock_dereference() helper does not have
"compat" in the name. The name would be quite long and I think
in this case it should be obvious that we need _a_ lock.
netdev_lock_dereference() already exists and means dev->lock
is always expected.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 2ccccf5fb43f ("net_sched: update hierarchical backlog too") renamed
qdisc_tree_decrease_qlen() to qdisc_tree_reduce_backlog(), but this comment
was missed. Update it.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260605212239.2261320-1-victor@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Each record release via tls_strp_msg_done() triggered
tls_strp_check_rcv(), which called tls_rx_msg_ready() and
fired saved_data_ready(). During a multi-record receive, the
first N-1 wakeups are pure overhead: the caller is already
running and will pick up subsequent records on the next loop
iteration. The recvmsg and splice_read paths share this waste.
Suppress per-record notifications and emit a single one on
reader exit. tls_rx_rec_done() releases the current record
and parses the next without announcing; tls_strp_check_rcv()
gains a bool announce parameter so callers can request the
quiet form. tls_rx_reader_release() fires the deferred
announce on exit through tls_rx_msg_maybe_announce(), an
idempotent helper that calls saved_data_ready() only when a
record is parsed and has not yet been announced.
To keep the final notification idempotent against records that
the BH or the worker has already announced, tls_strparser gains
a msg_announced bit. tls_rx_msg_maybe_announce() sets the bit
when firing saved_data_ready(); the bit is cleared whenever
the parsed record is wiped, by tls_strp_msg_consume() on
consumption or by tls_strp_msg_load() when the lower socket
loses bytes from under the parse. A second call for the same
parsed record -- as when recvmsg() satisfies the request from
ctx->rx_list without touching the strparser -- becomes a
no-op.
With no remaining callers, tls_strp_msg_done() is removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260604-tls-read-sock-v12-5-b114efa6e3e2@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net->ipv6.ip6mr_notifier_ops and net->ipv6.ipmr_seq are used
only in net/ipv6/ip6mr.c.
Let's move these definitions under CONFIG_IPV6_MROUTE.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-16-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip6mr does not have rtnetlink interface for MFC unlike ipmr,
which uses dev_get_by_index_rcu() to set struct mfcctl.mfcc_parent.
ip6mr_mfc_add() and ip6mr_mfc_delete() are called under RTNL
from ip6_mroute_setsockopt() only.
There are no RTNL dependant, but ip6_mroute_setsockopt() reuses
RTNL just for mrt->mfc_hash and mrt->mfc_cache_list.
Let's replace RTNL with a new per-netns mutex.
Later, ip6mr_notifier_ops and ipmr_seq will be moved under
CONFIG_IPV6_MROUTE.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-15-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 22e36ea9f5d7 ("inet: allow ip_valid_fib_dump_req() to
be called with RTNL or RCU") introduced the rtnl_held field in
struct fib_dump_filter to switch __dev_get_by_index() and
dev_get_by_index_rcu() depending on the caller's context.
This field served as an interim measure while we were incrementally
converting all callers of ip_valid_fib_dump_req() to RCU.
Now that all users (IPv4, IPv6, ipmr, ip6mr, and MPLS) have
been converted to RCU, the field is no longer necessary.
Let's remove it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260604224712.3209821-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This infrastructure is not used anymore after moving ct timeout and
helper to use datapath refcount to track object use.
Revert commit c56716c69ce1 ("netfilter: extensions: introduce extension
genid count") this patch disables all ct extensions (leading to NULL)
for unconfirmed conntracks, when this is only targeted at ct helper and
ct timeout. There is also codebase that dereferences the ct extension
without checking for NULL which could lead to crash.
Fixes: c56716c69ce1 ("netfilter: extensions: introduce extension genid count")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds a new ->ct_refcnt field to struct nf_conntrack_helper
which is bumped when the helper is used by the ct helper extension. Drop
this reference count when the conntrack entry is released. This is a
packet path refcount which ensures that struct nf_conntrack_helper
remains in place for tricky scenarios where a packet sits in nfqueue, or
elsewhere, with a conntrack that refers to this helper.
For simplicity, this leaves a single refcount for helper objects in
place, remove the existing refcount for control plane that ensures that
the helper does not go away if it is used by ruleset.
On helper removal, the help callback is set to NULL to disable it from
packet path and, after rcu grace period, existing expectations are
removed. Update ctnetlink to disable access to .to_nlattr and
.from_nlattr if the helper is going away.
Remove nf_queue_nf_hook_drop() since it has proven not to be effective
because packets with unconfirmed conntracks which are still flying to
sit in nfqueue.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Move the GRE specific cleanup to nf_conntrack_proto_gre.c to ensure that
the .destroy callback for the pptp helper is still reachable by existing
conntrack entries while pptp module is being removed.
This is a preparation patch, no functional changes are intended.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
mac80211 converts 802.3 multicast packets to 802.11 format
before driver TX, even when Ethernet encapsulation offload
is enabled. This prevents drivers that support multicast
Ethernet encapsulation offload from receiving frames in
native 802.3 format.
Introduce the IEEE80211_OFFLOAD_ENCAP_MCAST flag to bypass the
802.11 encapsulation step and pass the multicast packet to the
driver in 802.3 format. Drivers that support multicast Ethernet
encapsulation offload can advertise this flag.
Disable multicast encapsulation offload in MLO case for drivers not
advertising MLO_MCAST_MULTI_LINK_TX support for AP mode and for
3-address AP_VLAN multicast packets.
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20260604162403.1563729-4-tamizh.raja@oss.qualcomm.com
[fix unlikely(), indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Adapt all existing helpers to use a modified version of
nf_ct_helper_init(), to dynamically allocate struct nf_conntrack_helper.
Allocate expect_policy[] built-in into the helper to ensure this area is
reachable after helper removal since a follow up patch adds refcount to
track use of the nf_conntrack_helper structure from packet path so it
remains around until last reference from ct helper extension is dropped.
Export __nf_conntrack_helper_register() which allows to register
nfnetlink_cthelper dynamically allocated helper. Adapt nfnetlink_cthelper
to use the built-in expect_policy[].
This is a preparation patch to add packet path refcounting to helpers.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a refcount for struct nf_ct_timeout which is used by ct extension to
set the custom ct timeout policy, this tells us that the ct timeout is
being used by a conntrack entry. When the last conntrack entry drops the
refcount on the ct timeout, the ct timeout is released.
Remove the refcount for control plane which controls if the ruleset
refers to the timeout policy. After this update, it is possible to
remove the ct timeout policy from nfnetlink_cttimeout immediately.
This is for simplicity not to handle two refcounts on a single object.
Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just
hold a reference to the nf_ct_timeout object until packet is reinjected,
since this is part of the ct extension, this will be released by the
time the conntrack is freed.
nf_ct_untimeout() is still called to clean up in a best effort basis:
the ct timeout on existing entries gets removed when the ct timeout goes
away, but as long as the iptables ruleset still refers to the ct timeout
through a template, new conntracks may keep attaching it and extend its
lifetime until the rule is removed.
nf_ct_untimeout() is not called anymore from module removal path, this
is unlikely to find timeouts give module refcount is bumped, and the new
refcount already tracks the ct timeout policy use so it is released when
unused.
Fixes: 50978462300f ("netfilter: add cttimeout infrastructure for fine timeout tuning")
Fixes: 7e0b2b57f01d ("netfilter: nft_ct: add ct timeout support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently, we are using atomic_t to track the number of
connections. On 64-bit setups with large memory there is
a risk this counter to overflow. Also, setups with many
containers may need to tune the limit for connections.
Add sysctl control to limit the number of connections to
1,073,741,824 (64-bit) and 16,777,216 (32-bit).
Depending on the admin's privilege, the value is
used to change a soft or hard limit allowing
unprivileged admins to change the soft limit in
range determined by privileged admins.
Link: https://sashiko.dev/#/patchset/20260523172715.94795-1-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260430074420.26697-7-ja%40ssi.bg
Link: https://sashiko.dev/#/patchset/20260522105546.13732-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
notifications
Currently, ie_len in cfg80211_notify_new_peer_candidate is defined as
1-byte field, capping the maximum IE list size at 255 bytes. When a
large beacon is received, the IE list is truncated, passing incomplete
data to wpa_supplicant. This causes supplicant to fail parsing the IEs.
Increasing the size of ie_len to allow the full length of the IE list to
be forwarded properly.
Signed-off-by: Thiyagarajan Pandiyan <thiyagarajan@aerlync.com>
Link: https://patch.msgid.link/20260605054307.427874-1-thiyagarajan@aerlync.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc7).
Silent conflicts:
net/wireless/nl80211.c
cb9959ab5f99 ("wifi: cfg80211: enforce HE/EHT cap/oper consistency")
a384ae969902 ("wifi: cfg80211: move AP HT/VHT/... operation to beacon info")
https://lore.kernel.org/aiGJDaHV4UlCexIQ@sirena.org.uk
Conflicts:
drivers/net/wireless/intel/iwlwifi/mld/ap.c
a342c99cb70d ("wifi: iwlwifi: mld: honor BSS_CHANGED_BEACON_ENABLED")
9bf1b409afc7 ("wifi: iwlwifi: mld: send tx power constraints before link activation")
https://lore.kernel.org/ah2bfedhV45ZxMO8@sirena.org.uk
drivers/net/wireless/intel/iwlwifi/pcie/drv.c
093305d801fa ("wifi: iwlwifi: pcie: simplify the resume flow if fast resume is not used")
e2323929a68a ("wifi: iwlwifi: pcie: add debug print for resume flow if powered off")
https://lore.kernel.org/ah2bfedhV45ZxMO8@sirena.org.uk
Adjacent changes:
drivers/net/ethernet/airoha/airoha_eth.c
b38cae85d1c4 ("net: airoha: Fix use-after-free in metadata dst teardown")
ec6c391bcca7 ("net: airoha: Introduce airoha_gdm_dev struct")
drivers/net/ethernet/microchip/lan743x_main.c
8173d22b211f ("net: lan743x: permit VLAN-tagged packets up to configured MTU")
e3c6508a46f5 ("net: lan743x: avoid netdev-based logging before netdev registration")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
FW module flashing was written so that the flashing happens
without holding rtnl_lock. This allows flashing multiple modules
at once. Current drivers can handle that well, but we should
let drivers depend on the netdev instance lock. Instance lock
is per netdev, and so is the module so we won't break parallel
updates.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260603012840.2254293-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub suggests renaming the existing assert to match
the netdev_lock_ops_compat() semantics.
We want netdev_assert_locked_ops() to mean - if the driver
is ops locked - check that it's holding the device lock.
The existing helper check for either ops lock or rtnl_lock,
which is the locking behavior of netdev_lock_ops_compat().
The reason for naming divergence is likely that
netdev_ops_assert_locked() predated the _compat() helpers.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260603012840.2254293-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcf_pedit_act() computes the COW range for skb_ensure_writable()
once before the key loop using tcfp_off_max_hint, but the hint does
not account for the runtime header offset added by typed keys. This
can leave part of the write region un-COW'd.
Fix by moving skb_ensure_writable() inside the per-key loop where
the actual write offset is known, and add overflow checking on the
offset arithmetic. For negative offsets (e.g. Ethernet header edits
at ingress), use skb_cow() to COW the headroom instead. Guard
offset_valid() against INT_MIN, where negation is undefined.
Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Reported-by: Han Guidong <2045gemini@gmail.com>
Reported-by: Zhang Cen <rollkingzzc@gmail.com>
Reviewed-by: Han Guidong <2045gemini@gmail.com>
Tested-by: Han Guidong <2045gemini@gmail.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Link: https://patch.msgid.link/20260531123221.48732-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new netlink method to migrate a single xfrm_state.
Unlike the existing migration mechanism (SA + policy), this
supports migrating only the SA and allows changing the reqid.
The SA is looked up via xfrm_usersa_id, which uniquely
identifies it, so old_saddr is not needed. old_daddr is carried in
xfrm_usersa_id.daddr.
The reqid is invariant in the old migration.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The xuo pointer is not modified by xfrm_dev_state_add(); make it const.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In preparation for an upcoming patch, move the xfrm_encap_tmpl and
xfrm_user_offload pointers from separate parameters into struct
xfrm_migrate, reducing the parameter count of
xfrm_state_migrate_create(), xfrm_state_migrate_install()
and xfrm_state_migrate()
The fields are placed after the four xfrm_address_t members where
the struct is naturally 8-byte aligned, avoiding padding.
No functional change.
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add xfrm_migrate_sync() to copy curlft and replay state from the old SA
to the new one before installation. The function allocates no memory, so
it can be called under a spinlock. In preparation for a subsequent patch
in this series.
A subsequent patch calls this under x->lock, atomically capturing the
latest lifetime counters and replay state from the original SA and
deleting it in the same critical section to prevent SN/IV reuse
for XFRM_MSG_MIGRATE_STATE method.
No functional change.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
To prepare for subsequent patches, split
xfrm_state_migrate() into two functions:
- xfrm_state_migrate_create(): creates the migrated state
- xfrm_state_migrate_install(): installs it into the state table
splitting will help to avoid SN/IV reuse when migrating AEAD SA.
And add const whenever possible.
No functional change.
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In preparation for a later patch in this series s/reqid/old_reqid/.
No functional change.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add a struct extack parameter to xfrm_init_state() and pass it
through to __xfrm_init_state(). This allows validation errors detected
during state initialization to propagate meaningful error messages back
to userspace.
xfrm_state_migrate() now passes extack so that errors from the
XFRM_MSG_MIGRATE_STATE path are properly reported. Callers without an
extack context (af_key, ipcomp4, ipcomp6) pass NULL, preserving their
existing behaviour.
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: fix memory leak in error path of hci_alloc_dev()
- hci_sync: reject oversized Broadcast Announcement prepend
- MGMT: Fix backward compatibility with userspace
- MGMT: validate advertising TLV before type checks
- L2CAP: reject BR/EDR signaling packets over MTUsig
- RFCOMM: validate skb length in MCC handlers
- RFCOMM: hold listener socket in rfcomm_connect_ind()
- ISO: Fix not releasing hdev reference on iso_conn_big_sync
- ISO: Fix a use-after-free of the hci_conn pointer
- ISO: Fix data-race on iso_pi fields in hci_get_route calls
- SCO: Fix data-race on sco_pi fields in sco_connect
- BNEP: reject short frames before parsing
* tag 'for-net-2026-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix backward compatibility with userspace
Bluetooth: SCO: Fix data-race on sco_pi fields in sco_connect
Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls
Bluetooth: ISO: Fix a use-after-free of the hci_conn pointer
Bluetooth: ISO: Fix not releasing hdev reference on iso_conn_big_sync
Bluetooth: fix memory leak in error path of hci_alloc_dev()
Bluetooth: bnep: reject short frames before parsing
Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend
Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
Bluetooth: RFCOMM: validate skb length in MCC handlers
Bluetooth: MGMT: validate advertising TLV before type checks
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
====================
Link: https://patch.msgid.link/20260603162714.342496-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of passing opt_size address to mptcp_established_options(),
change this function to return it by value.
This removes the need for an expensive stack canary in
tcp_established_options() when CONFIG_STACKPROTECTOR_STRONG=y.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-92 (-92)
Function old new delta
tcp_options_write.isra 1423 1407 -16
mptcp_established_options 2746 2720 -26
tcp_established_options 553 503 -50
Total: Before=22110750, After=22110658, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602125138.2317015-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported the following uninit splat:
BUG: KMSAN: uninit-value in mptcp_write_data_fin net/mptcp/options.c:542 [inline]
BUG: KMSAN: uninit-value in mptcp_established_options_dss net/mptcp/options.c:590 [inline]
BUG: KMSAN: uninit-value in mptcp_established_options+0x112f/0x3530 net/mptcp/options.c:874
mptcp_write_data_fin net/mptcp/options.c:542 [inline]
mptcp_established_options_dss net/mptcp/options.c:590 [inline]
mptcp_established_options+0x112f/0x3530 net/mptcp/options.c:874
tcp_established_options+0x312/0xcc0 net/ipv4/tcp_output.c:1192
__tcp_transmit_skb+0x5dc/0x5fe0 net/ipv4/tcp_output.c:1575
__tcp_send_ack+0x967/0xad0 net/ipv4/tcp_output.c:4499
tcp_send_ack+0x3d/0x60 net/ipv4/tcp_output.c:4505
mptcp_subflow_shutdown+0x164/0x690 net/mptcp/protocol.c:3137
mptcp_check_send_data_fin+0x31b/0x3d0 net/mptcp/protocol.c:3218
__mptcp_wr_shutdown net/mptcp/protocol.c:3234 [inline]
__mptcp_close+0x860/0x1360 net/mptcp/protocol.c:3313
mptcp_close+0x42/0x260 net/mptcp/protocol.c:3367
inet_release+0x1ee/0x2a0 net/ipv4/af_inet.c:442
__sock_release net/socket.c:722 [inline]
sock_close+0xd6/0x2f0 net/socket.c:1514
__fput+0x60e/0x1010 fs/file_table.c:510
____fput+0x25/0x30 fs/file_table.c:538
task_work_run+0x208/0x2b0 kernel/task_work.c:233
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
__exit_to_user_mode_loop kernel/entry/common.c:67 [inline]
exit_to_user_mode_loop+0x306/0x1b60 kernel/entry/common.c:98
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:238 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline]
__do_fast_syscall_32+0x2c7/0x460 arch/x86/entry/syscall_32.c:310
do_fast_syscall_32+0x37/0x80 arch/x86/entry/syscall_32.c:332
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:370
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
Local variable opts created at:
__tcp_transmit_skb+0x4d/0x5fe0 net/ipv4/tcp_output.c:1536
__tcp_send_ack+0x967/0xad0 net/ipv4/tcp_output.c:4499
The output path currently omits initializing the mptcp extension
`use_map` flag in a few corner cases.
Address the issue always zeroing all the extensions flags before
eventually initializing the individual bits. To that extent, introduce
and use a struct_group to avoid multiple bitwise operations.
Fixes: cfcceb7a39fc ("tcp: shrink per-packet memset in __tcp_transmit_skb()")
Cc: stable@vger.kernel.org
Reported-by: syzbot+ff020673c5e3d94d9478@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff020673c5e3d94d9478
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-10-856831229976@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR
signaling packets up to the channel MTU and dispatches each command
without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer
within radio range can send a fixed-channel CID 0x0001 packet that is
larger than MTUsig and contains many L2CAP_ECHO_REQ commands before
pairing. In a real-radio stock-kernel run, one 681-byte signaling
packet containing 168 zero-length ECHO_REQ commands made the target
transmit 168 ECHO_RSP frames over about 220 ms.
Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can
force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling
packet containing packed ECHO_REQ commands.
Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and
reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP
carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched.
The Bluetooth Core spec wording for MTUExceeded says the reject
identifier shall match the first request command in the packet, and
that packets containing only responses shall be silently discarded.
Linux intentionally deviates from that prescription: silently
discarding desynchronizes the peer because the remote stack never
learns its responses were dropped, and locating the first request
command requires walking command headers past MTUsig, i.e. processing
bytes from a packet we have already decided is too large to process.
We therefore always emit one reject and use the identifier from the
first command header, a single fixed-offset byte read.
The unrestricted BR/EDR signaling parser and ECHO_REQ response path both
trace to the initial git import; no later introducing commit is
available for a Fixes tag.
Cc: stable@vger.kernel.org
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Link: https://lore.kernel.org/r/20260518002800.1361430-1-michael.bommarito@gmail.com
Link: https://lore.kernel.org/r/20260520135034.1060859-1-michael.bommarito@gmail.com
Link: https://lore.kernel.org/r/20260521000555.3712030-1-michael.bommarito@gmail.com
Assisted-by: Claude:claude-opus-4-7
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Introduce basic rate encoding/decoding for S1G stas such that the
usermode rx reporting is relevant as it currently uses VHT calculations
which are obviously wildy different to S1G. Sample iw output (with the
associated iw patches applied):
Connected to 0c:bf:74:00:21:c4 (on wlan0)
SSID: wifi_halow
freq: 923.500
RX: 7325230 bytes (4756 packets)
TX: 190044 bytes (2238 packets)
signal: -38 dBm
rx bitrate: 43.3 MBit/s S1G-MCS 9 8MHz short GI S1G-NSS 1
tx bitrate: 43.3 MBit/s S1G-MCS 9 8MHz short GI S1G-NSS 1
bss flags:
dtim period: 1
beacon int: 100
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260602062224.1792985-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Remove WIPHY_FLAG_SUPPORTS_5_10_MHZ and 5/10 MHz channel
width support. We contemplated this back in early 2023
and didn't do it yet, but nobody stepped up to maintain
it.
It's already _mostly_ dead code since it can really only
be used for AP and maybe IBSS and monitor, but not on a
client since there's no way to scan (and hasn't been in
a very long time, if ever), so the only thing that ever
could really happen with it was run syzbot and trip over
assumptions in the code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260529084502.080c5885f0b7.I77cc94485b523c3c006005b9233db13cd4e077b3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix splat with PREEMPT_RCU because smp_processor_id() in nfqueue,
from Fernando Fernandez Mancera.
2) Fix possible use of pointer to old IPVS scheduler after RCU grace
period when editing service, from Julian Anastasov.
3) Fix possible forever RCU walk over rt->fib6_siblings in nft_fib6,
if rt is unlinked mid-iteration, apparently same issue happens in
the fib6 core. From Jiayuan Chen.
4) Add mutex to guard refcount in synproxy infrastructure, since
concurrent hook {un}registration can happen.
From Fernando Fernandez Mancera.
5) Bail out if IRC conntrack helper fails to parse a command, do not
try parsing using other command handlers, from Florian Westphal.
This fixes a possible out-of-bound read.
6) Possible use-after-free in nft_tunnel by releasing template dst
after all references has been dropped, from Tristan Madani.
7) Ignore conntrack template in nft_ct, from Jiayuan Chen.
8) Missing skb_ensure_writable() in ebt_snat, Yiming Qian.
9) Remove multi-register byteorder support, this allows for kernel
stack info leak, from Florian Westphal.
* tag 'nf-26-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_byteorder: remove multi-register support
netfilter: bridge: make ebt_snat ARP rewrite writable
netfilter: nft_ct: bail out on template ct in get eval
netfilter: nft_tunnel: fix use-after-free on object destroy
netfilter: conntrack_irc: fix possible out-of-bounds read
netfilter: synproxy: add mutex to guard hook reference counting
netfilter: nft_fib_ipv6: bail out of sibling walk if rt got unlinked
ipvs: clear the svc scheduler ptr early on edit
netfilter: xt_NFQUEUE: prefer raw_smp_processor_id
====================
Link: https://patch.msgid.link/20260601115923.433946-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When NEWTFILTER and DELFILTER are run concurrently it is possible to create a
race with an associated action.
Let's illustrate with CPU0 running NEWTFILTER and CPU1 running DELFILTER:
0: mutex_lock() <-- holds the idr lock
0: rcu_read_lock()
0: p = idr_find(idr, index) <-- action p is valid (RCU protects IDR)
0: mutex_unlock() <-- releases the idr lock
1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held
1: idr_remove(idr, index) <-- Action removed from IDR
1: mutex_unlock() <-- mutex released allowing us to delete the action
1: tcf_action_cleanup(p); kfree(p) <-- Kfrees p immediately, no deferral
0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- ouch, UAF p points to freed memory
This patch fixes the race condition between NEWTFILTER and DELFILTER by
adding struct rcu_head to tc_action used in the deferral and introducing a
call_rcu() in the delete path to defer the final kfree().
Note: this is a revert of commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu")
but also modernization/simplification to directly use kfree_rcu().
Let's illustrate the new restored code path:
0: rcu_read_lock()
1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held
1: idr_remove(idr, index)
1: mutex_unlock()
1: call_rcu(&p->tcfa_rcu, tcf_action_rcu_free) <-- defer kfree after grace period
0: p = idr_find(idr, index)
0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- fails, refcnt already 0
1: rcu_read_unlock() <-- release so freeing can run after grace period
After CPU1 calls idr_remove(), the object is no longer reachable through the IDR.
CPU0's subsequent idr_find() will return NULL, and even if it still held a
stale pointer, the immediate kfree() is now deferred until after the RCU grace
period, so no UAF can occur.
Fixes: d7fb60b9cafb ("net_sched: get rid of tcfa_rcu")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Kyle Zeng <kylebot@openai.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Kyle Zeng <kylebot@openai.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260531160812.68020-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip_vs_edit_service() while unbinding the old scheduler clears
the svc->scheduler ptr after the scheduler module initiates
RCU callbacks. This can cause packets to use the old
scheduler at the time when svc->sched_data is already freed
after RCU grace period.
Fix it by clearing the ptr early in ip_vs_unbind_scheduler(),
before the done_service method schedules any RCU callbacks.
Also, if the new scheduler fails to initialize when replacing
the old scheduler, try to restore the old scheduler while still
returning the error code.
Link: https://sashiko.dev/#/patchset/20260519015506.634185-1-rosenp%40gmail.com
Fixes: 05f00505a89a ("ipvs: fix crash if scheduler is changed")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Conflicts:
drivers/net/ethernet/microsoft/mana/mana_en.c:
17bfe0a8c014e ("net: mana: Add NULL guards in teardown path to prevent panic on attach failure")
d07efe5a6e641 ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-05-29
1) xfrm: route MIGRATE notifications to caller's netns
Thread the caller's netns through km_migrate() so that
MIGRATE notifications go to the issuing netns, fixing both the
init_net listener leak and MOBIKE notifications inside
non-init netns. From Maoyi Xie.
2) xfrm: ipcomp: Free destination pages on acomp errors
Move the out_free_req label up so that allocated destination
pages are released on decompression errors, not only on success.
From Herbert Xu.
3) xfrm: Check for underflow in xfrm_state_mtu
Reject configurations that cause xfrm_state_mtu() to underflow,
preventing a negative TFCPAD value from becoming a memset size
that triggers an out-of-bounds write of several terabytes.
From David Ahern.
4) xfrm: ah: use skb_to_full_sk in async output callbacks
Convert the possibly-incomplete skb->sk to a full socket pointer
in async AH callbacks so that a request_sock or timewait_sock
never reaches xfrm_output_resume() downstream consumers.
From Michael Bommarito.
5) Add and revert: esp: fix page frag reference leak on skb_to_sgvec failure
The patch does not fix te issue completely.
6) xfrm: esp: restore combined single-frag length gate
Check the aligned post-trailer combined length against a page limit
in the fast path, preventing skb_page_frag_refill() from falling
back to a page too small for the destination scatterlist.
From Jingguo Tan.
7) xfrm: iptfs: reset runtime state when cloning SAs
Reinitialise the clone's mode_data runtime objects before
publishing it, preventing queued skbs from being freed with
list state copied from the original SA when migration fails.
From Shaomin Chen.
8) xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
Flush policy tables and drain the workqueue in a .pre_exit handler
so that cleanup_net() pays one RCU grace period per batch instead
of one per namespace, fixing stalls at high CLONE_NEWNET rates.
From Usama Arif.
9) xfrm: input: hold netns during deferred transport reinjection
Take a netns reference when queueing deferred transport reinjection
work and drop it after the callback completes, keeping the skb->cb
net pointer valid until the deferred work runs.
From Zhengchuan Liang.
* tag 'ipsec-2026-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
xfrm: input: hold netns during deferred transport reinjection
xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
xfrm: iptfs: reset runtime state when cloning SAs
xfrm: esp: restore combined single-frag length gate
esp: fix page frag reference leak on skb_to_sgvec failure
xfrm: ah: use skb_to_full_sk in async output callbacks
xfrm: Check for underflow in xfrm_state_mtu
xfrm: ipcomp: Free destination pages on acomp errors
xfrm: route MIGRATE notifications to caller's netns
====================
Link: https://patch.msgid.link/20260529092648.3878973-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
