| Age | Commit message (Collapse) | Author |
|---|
|
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize' attributes
(Krzysztof Wilczyński)
- Convert PCI resource files to static attributes to avoid races that cause
'duplicate filename' warnings and boot panics (Krzysztof Wilczyński)
- Remove pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files(),
which are obsolete after converting to static attributes (Krzysztof
Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource mmap
path to match the generic path (Krzysztof Wilczyński)
- Convert sysfs 'legacy_io' and 'legacy_mem' to static attributes
(Krzysztof Wilczyński)
- Remove pci_create_legacy_files() and pci_sysfs_init(), which are obsolete
after converting to static attributes (Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with PCI
mmap (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no trailing
newline (Krzysztof Wilczyński)
* pci/sysfs:
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/sysfs: Add static PCI resource attribute macros
PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store()
PCI/sysfs: Split pci_llseek_resource() for device and legacy attributes
PCI/sysfs: Only allow supported resource types in I/O and MMIO helpers
PCI: Add pci_resource_is_io() and pci_resource_is_mem() helpers
PCI/sysfs: Use PCI resource accessor macros
|
|
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Rename 'added' to 'add_list' for naming consistency (Ilpo Järvinen)
- Consolidate 'add_list' sanity checks (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Move pci_resource_alignment() from header to setup-res.c file (Ilpo
Järvinen)
* pci/resource:
PCI: Move pci_resource_alignment() to setup-res.c file
PCI: Convert pci_resource_alignment() input parameters to const
PCI: Make pci_sriov_resource_alignment() pci_dev const
powerpc/pseries: Make pseries_get_iov_fw_value() & pnv_iov_get() pci_dev const
resource: Make resource_alignment() input const resource
PCI: Remove const removal cast
PCI: Consolidate add_list (aka realloc_head) empty sanity checks
PCI: Rename 'added' to 'add_list'
PCI: Log all resource claims
|
|
- Set power state to 'unknown' for all devices, not just those with
drivers, during suspend (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device doesn't
respond to config reads, to avoid invalid array accesses (Marco
Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether devices may
be reset while resuming from suspend due to platform issues; use this in
nvme to avoid issues on Qcom RCs (Manivannan Sadhasivam)
* pci/pm:
nvme-pci: Use pci_suspend_retains_context() during suspend
PCI: qcom: Indicate broken L1SS exit during resume from system suspend
PCI: Indicate context lost if L1SS exit is broken during resume from system suspend
PCI: Add pci_suspend_retains_context() to check if device state is preserved during suspend
PCI/IOV: Skip VF Resizable BAR restore on read error
PCI: Skip Resizable BAR restore on read error
PCI: Stop setting cached power state to 'unknown' on unbind
|
|
Currently, pci_create_legacy_files() and pci_remove_legacy_files() are
no-op stubs. With legacy attributes now handled by static groups
registered via pcibus_groups[], no call site needs them.
Remove both functions, their declarations, and the call sites in
pci_register_host_bridge(), pci_alloc_child_bus(), and pci_remove_bus().
Remove the pci_sysfs_init() late_initcall and sysfs_initialized. The
late_initcall originally existed to create all the dynamic PCI sysfs files,
but with both resource and legacy attributes now handled by static groups,
it is no longer needed.
Remove the legacy_io and legacy_mem fields from struct pci_bus which were
used to track the dynamically allocated legacy attributes.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-24-kwilczynski@kernel.org
|
|
Add defines for the standard PCI legacy address space sizes, replacing the
raw literals used by the legacy sysfs attributes.
Then, replace open-coded values with the newly added macros.
No functional changes intended.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-20-kwilczynski@kernel.org
|
|
Currently, pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files()
are no-op stubs. With both the generic and Alpha resource files now
handled by static attribute groups, no platform needs dynamic per-device
sysfs file creation.
Remove both functions, their declarations, and the call sites in
pci_bus_add_device() and pci_stop_dev().
Remove __weak pci_create_resource_files() and pci_remove_resource_files()
stubs and their declarations in pci.h, as no architecture overrides them
anymore.
Remove the res_attr[] and res_attr_wc[] fields from struct pci_dev which
were used to track dynamically allocated resource attributes.
Finally, simplify pci_sysfs_init() to only handle legacy file creation
under HAVE_PCI_LEGACY, removing the per-device loop and the
HAVE_PCI_SYSFS_INIT helper added earlier.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-19-kwilczynski@kernel.org
|
|
On platforms with HAVE_PCI_MMAP or ARCH_GENERIC_PCI_MMAP_RESOURCE, resource
files are now handled by static attribute groups registered via
pci_dev_groups[].
Stub out the pci_create_sysfs_dev_files() and pci_remove_sysfs_dev_files(),
as the dynamic resource file creation is no longer needed.
Also, simplify pci_sysfs_init() on these platforms to only iterate buses
for legacy attributes creation, skipping the per-device loop.
Move the __weak stubs for pci_create_resource_files() and
pci_remove_resource_files() into the #else branch since only platforms
without HAVE_PCI_MMAP (such as Alpha architecture) still need them. Guard
the res_attr[] and res_attr_wc[] fields in struct pci_dev the same way.
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-10-kwilczynski@kernel.org
|
|
Currently, the PCI resource files (resourceN, resourceN_wc) are dynamically
created by pci_create_sysfs_dev_files(), called from both
pci_bus_add_device() and the pci_sysfs_init() late_initcall, with only a
sysfs_initialized flag for synchronisation. This has caused warnings and
boot panics when both paths race on the same device, e.g.:
sysfs: cannot create duplicate filename '/devices/pci0000:3c/0000:3c:01.0/0000:3e:00.2/resource2'
This is especially likely on Devicetree-based platforms, where the PCI host
controllers are platform drivers that probe via the driver model, which can
happen during or after the late_initcall. As such, pci_bus_add_device()
and pci_sysfs_init() are more likely to overlap.
Convert to static const attributes with three attribute groups (I/O, UC,
WC), each with an .is_bin_visible() callback that checks resource flags,
BAR length, and non_mappable_bars. A .bin_size() callback provides
pci_resource_len() to the kernfs node for correct stat and lseek behaviour.
As part of this conversion:
- Rename pci_read_resource_io() and pci_write_resource_io() to
pci_read_resource() and pci_write_resource() since the callbacks are no
longer I/O-specific in the static attribute context.
- Update __resource_resize_store() to use sysfs_create_groups() and
sysfs_remove_groups(), which re-evaluates visibility and runs the
.bin_size() callback for the static resource attribute groups.
- Remove pci_create_resource_files(), pci_remove_resource_files(), and
pci_create_attr() which are no longer needed.
- Move the __weak stubs outside the #if guard so they remain available
for callers converted in subsequent commits.
Platforms that do not define the HAVE_PCI_MMAP macro or the
ARCH_GENERIC_PCI_MMAP_RESOURCE macro, such as Alpha architecture,
continue using their platform-specific resource file creation.
For reference, the dynamic creation dates back to the pre-Git era:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/drivers/pci/pci-sysfs.c?id=42298be0eeb5ae98453b3374c36161b05a46c5dc
The write-combine support was added in commit 45aec1ae72fc ("x86: PAT
export resource_wc in pci sysfs").
Many other reports mentioned in the cover letter (first Link: below).
Link: https://lore.kernel.org/r/20260508043543.217179-1-kwilczynski@kernel.org/
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215515
Closes: https://github.com/openwrt/openwrt/issues/17143
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://patch.msgid.link/20260508043543.217179-8-kwilczynski@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "khugepaged: add mTHP collapse support" (Nico Pache)
Provide khugepaged with the capability to collapse anonymous memory
regions to mTHPs
- "Remove CONFIG_READ_ONLY_THP_FOR_FS and enable file THP for writable
files" (Zi Yan)
Remove the READ_ONLY_THP_FOR_FS check in file_thp_enabled(), so that
khugepaged and MADV_COLLAPSE can run on filesystems with PMD THP
pagecache support even without READ_ONLY_THP_FOR_FS enabled
- "make MM selftests more CI friendly" (Mike Rapoport)
General fixes and cleanups to the MM selftests. Also move more MM
selftests under the kselftest framework, making them more amenable to
ongoing CI testing
- "selftests/mm: fix failures and robustness improvements" and
"selftests/mm: assorted fixes for hmm-tests" (Sayali Patil)
Fix several issues in MM selftests which were revealed by powerpc 64k
pagesize
* tag 'mm-stable-2026-06-23-08-55' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (118 commits)
Revert "mm: limit filemap_fault readahead to VMA boundaries"
mm/vmscan: pass NULL to trace vmscan node reclaim
mm: use mapping_mapped to simplify the code
selftests/mm: fix exclusive_cow test fork() handling
selftests/mm: remove hardcoded THP sizing assumptions in hmm tests
selftests/mm: allow PUD-level entries in compound testcase of hmm tests
mm/gup_test: reject wrapped user ranges
mm/page_frag: reject invalid CPUs in page_frag_test
mm/damon/core: always put unsuccessfully committed target pids
mm: page_isolation: avoid unsafe folio reads while scanning compound pages
mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()
selftests: mm: fix and speedup "droppable" test
mm: merge writeout into pageout
MAINTAINERS: add Hao Ge as reviewer for codetag and alloc_tag
selftests/mm: clarify alternate unmapping in compaction_test
selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category
selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero
selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported
selftests/mm: ensure destination is hugetlb-backed in hugetlb-mremap
selftest/mm: register existing mapping with userfaultfd in hugetlb-mremap
...
|
|
pci_sriov_resource_alignment() inputs struct pci_dev which it should not
need to alter to calculate alignment.
Make pci_dev pci_sriov_resource_alignment() inputs const. It requires
making pci_iov_resource_size() input const as well.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-8-ilpo.jarvinen@linux.intel.com
|
|
resource_alignment() does not need to change resource so it can be made
const.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260429122617.7324-6-ilpo.jarvinen@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (115 commits)
platform/x86/intel/pmc: Add NVL PCI IDs for SSRAM telemetry discovery
platform/x86/intel/pmc/ssram: Make PMT registration optional
platform/x86/intel/pmc/ssram: Add ACPI discovery scaffolding
platform/x86/intel/pmc/ssram: Switch to static array with per-index probe state
platform/x86/intel/pmc/ssram: Refactor DEVID/PWRMBASE extraction into helper
platform/x86/intel/pmc/ssram: Add PCI platform data
platform/x86/intel/pmc/ssram: Rename probe and PCI ID table for consistency
platform/x86/intel/pmc: Add ACPI PWRM telemetry driver for Nova Lake S
platform/x86/intel/pmc: Add PMC SSRAM Kconfig description
platform/x86/intel/pmt: Unify header fetch and add ACPI source
platform/x86/intel/pmt: Cache the telemetry discovery header
platform/x86/intel/pmt: Pass discovery index instead of resource
platform/x86/intel/pmt/telemetry: Move overlap check to post-decode hook
platform/x86/intel/pmt/crashlog: Split init into pre-decode
platform/x86/intel/pmt: Add pre/post decode hooks around header parsing
modpost: Handle malformed WMI GUID strings
platform/wmi: Make sysfs attributes const
platform/wmi: Make wmi_bus_class const
hwmon: (dell-smm) Use new buffer-based WMI API
platform/x86: dell-ddv: Use new buffer-based WMI API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Core:
- add debugfs support for used channels
- fix resource leak on startup failure
- propagate tx error codes
- clarify blocking mode thread support
Drivers:
- exynos: remove unused register definitions
- imx: refactor IRQ handlers, migrate to devm helpers, and other
minor improvements
- mpfs: fix syscon presence check in inbox ISR
- mtk-adsp: fix use-after-free during device teardown
- qcom: add dt-bindings for QCOM Maili, Hawi, Shikra APCS, and Nord
CPUCP platform support"
* tag 'mailbox-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (23 commits)
mailbox: imx: Don't force-thread the primary handler
mailbox: imx: Move the RXDB part of the mailbox into the threaded handler
mailbox: imx: Move the RX part of the mailbox into the threaded handler
mailbox: imx: Start splitting the IRQ handler in primary and threaded handler
mailbox: imx: Use channel index instead of zero in imx_mu_specific_rx()
mailbox: imx: use devm_of_platform_populate()
mailbox: imx: Use devm_pm_runtime_enable()
mailbox: imx: Add a channel shutdown field
mailbox: imx: Forward the timeout/ error in imx_mu_generic_tx()
dt-bindings: mailbox: qcom: Add IPCC support for Maili Platform
mailbox: add list of used channels to debugfs
mailbox: don't free the channel if the startup callback failed
mailbox: Make mbox_send_message() return error code when tx fails
mailbox: Clarify multi-thread is not supported in blocking mode
mailbox: mtk-adsp: fix UAF during device teardown
mailbox: qcom: Unify user-visible "Qualcomm" name
mailbox: exynos: Drop unused register definitions
dt-bindings: mailbox: qcom: Add IPCC support for Hawi Platform
dt-bindings: mailbox: qcom,cpucp-mbox: Add Hawi compatible
dt-bindings: mailbox: qcom: Add Shikra APCS compatible
...
|
|
As SoundWire devices tend to enumerate on the bus after probe, drivers
frequently need to wait for the device to initialise from common driver
code. The common system is to split drivers into a core module and then
a module for each communication bus. These two facts tend to cause
Kconfig issues, the issue tends to be when SOUNDWIRE=m and DRIVER_I2C=y,
this usually selects DRIVER=y. The driver code then wants to call
sdw_slave_wait_for_init(), but this results in calling a module function
from built in code. A depends on SOUNDWIRE | !SOUNDWIRE could be added to
the end driver but this seems slightly off as it adds a lot of counter
intuitive depends.
A simpler solution is to make sdw_slave_wait_for_init() a static inline
function. As part of doing this add a check for the slave device being
NULL acknowledging that this is likely called from code that is shared
between control buses. It does require dropping the call to
sdw_show_ping_status() but this can be added back in end drivers that
used it originally.
Currently this is causing rand config issues on RT5682 and will soon
also cause similar problems on cs42l43.
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260623101814.24044-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Store master conntrack tuple in the expectation since exp->master might
refer to a different conntrack when accessed from rcu read side lock
area due to typesafe rcu rules.
Fixes: 02a3231b6d82 ("netfilter: nf_conntrack_expect: store netns and zone in expectation")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
IRC Direct client-to-client requires plaintext. IRC over TLS should be
preferred, making this helper ineffective. Add a deprecation warning and
update the help text to better reflect that this is needed for the DCC
extension, not IRC itself.
PPTP is esoteric these days and it is the only helper that requires the
destroy callback in the conntrack helper API.
Removal would simplify the conntrack core.
Both helpers are IPv4 only.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Store tiling function pointer in struct intel_panic instead of struct
intel_framebuffer, and store struct intel_panic pointer instead of
struct intel_framebuffer pointer in struct drm_scanout_buffer private
member.
To make this happen, pass the tiling function pointer to panic setup
hook, and initialize sb->private in the hook for clarity.
This allows us to drop the dependency on struct intel_framebuffer from
i915 and xe panic code.
Note: It would be less verbose to have a typedef for the tiling function
pointer. However, there isn't a nice location for it that wouldn't also
increase header interdependencies.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/d97abae79db3437c617cd4cb6193ba017b3a8d78.1780394867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Start reducing i915 and xe core dependency on struct intel_framebuffer
by passing the fb obj from display.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/840c4ccaced5f1c82277285938287776c8cdf513.1780394867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
- use correct names in kernel-doc comments
- add missing struct members to kernel-doc comments
Warning: include/linux/netfilter/x_tables.h:41 struct member 'targinfo' not described in 'xt_action_param'
Warning: include/linux/netfilter/x_tables.h:41 Excess struct member 'targetinfo' description in 'xt_action_param'
Warning: include/linux/netfilter/x_tables.h:90 struct member 'family' not described in 'xt_mtchk_param'
Warning: include/linux/netfilter/x_tables.h:90 struct member 'nft_compat' not described in 'xt_mtchk_param'
Warning: include/linux/netfilter/x_tables.h:101 expecting prototype for struct xt_mdtor_param. Prototype was for struct xt_mtdtor_param instead
Warning: include/linux/netfilter/x_tables.h:121 struct member 'net' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'table' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'target' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'targinfo' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'hook_mask' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'family' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:121 struct member 'nft_compat' not described in 'xt_tgchk_param'
Warning: include/linux/netfilter/x_tables.h:345 expecting prototype for xt_recseq(). Prototype was for DECLARE_PER_CPU() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Memoryless force-feedback devices use a timer to manage playback of
effects. When a driver for such a device is unbound (or the device is
unregistered for other reasons), the driver typically frees its private
data synchronously. However, the input_dev structure (and its associated
force-feedback structures, including the timer) is only freed when the
last user closes the corresponding device node.
If userspace keeps the device node open while the device is unregistered
(e.g., during driver unbind), the force-feedback timer can still fire
after the driver's private data has been freed.
Introduce a new 'stop' callback to struct ff_device, and call it from
input_unregister_device() before the device is deleted. Implement this
callback for memoryless devices and synchronously shut down the timer to
ensure it is stopped and cannot be rearmed once unregistration happens.
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"The most notable change is the removal of the fscache backend: it has
been deprecated for almost two years, mainly because EROFS file-backed
mounts and fanotify pre-content hooks (together with erofs-utils) now
provide better functionality and simpler codebase. In addition,
fscache has depended on netfslib for years, which is undesirable for
EROFS since it is a local filesystem. More details in [1].
In addition, sparse support has been added to the pcluster layout,
which is helpful for large sparse AI datasets, and map requests for
chunk-based inodes have been optimized to be more efficient as well.
There are also the usual fixes and cleanups.
Summary:
- Report more consecutive chunks of the same type for
each iomap request
- Add sparse support for the pcluster layout
- Update the EROFS documentation overview
- Remove the deprecated fscache backend
- Various fixes and cleanups"
Link: https://lore.kernel.org/r/20260622013622.934174-1-hsiangkao@linux.alibaba.com [1]
* tag 'erofs-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: handle 48-bit blocks_hi for compressed inodes
erofs: remove fscache backend entirely
erofs: simplify RCU read critical sections
erofs: add sparse support to pcluster layout
erofs: add folio order to trace_erofs_read_folio
erofs: introduce erofs_map_chunks()
erofs: call erofs_exit_ishare() before rcu_barrier()
erofs: update the overview of the documentation
erofs: clean up erofs_ishare_fill_inode()
|
|
When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added,
fib_lookup() performs route lookup directly on two tables.
Since the first lookup does not properly bail out, the result
of an error route in the merged local/main table could be
overwritten by another route in the default table:
# unshare -n
# ip link set lo up
# ip route add 192.168.0.0/24 dev lo table 253
# ip route add unreachable 192.168.0.0/24
# ip route get 192.168.0.1
192.168.0.1 dev lo table default uid 0
cache <local>
Once a random rule is added, the error route is respected:
# ip rule add table 0
# ip rule del table 0
# ip route get 192.168.0.1
RTNETLINK answers: No route to host
Let's fix the inconsistent behaviour.
Fixes: f4530fa574df ("ipv4: Avoid overhead when no custom FIB rules are installed.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260619212753.3367244-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new function rtc_read_next_alarm() that reads the next expiring
alarm from the RTC timerqueue. This is different from rtc_read_alarm(),
which only reads the aie_timer.
The wakealarm sysfs file programs the rtc->aie_timer, whereas the
alarmtimer suspend routine programs its own timer into the RTC timerqueue.
Both timers end up in the RTC's timerqueue, and the first expiring timer
is what gets armed in the hardware.
This new function allows code to query which alarm will actually fire
next, regardless of which subsystem programmed it. This is needed by
platform code that needs to program secondary timers based on the
actual next wakeup time.
Link: https://lore.kernel.org/all/87ed50z0le.ffs@tglx
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260521043714.1022930-2-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add the debugfs and trace plumbing used to trigger and observe
manual client reset.
The reset interface exposes a trigger file for operator-initiated
reset and a status file for tracking the most recent run. The
tracepoints record scheduling, completion, and blocked caller
behavior so reset progress can be diagnosed from the client side.
debugfs layout under /sys/kernel/debug/ceph/<client>/reset/:
trigger - write to initiate a manual reset
status - read to see the most recent reset result
The reset directory is cleaned up via debugfs_remove_recursive()
on the parent, so individual file dentries are not stored.
Tracepoints:
ceph_client_reset_schedule - reset queued
ceph_client_reset_complete - reset finished (success or failure)
ceph_client_reset_blocked - caller blocked waiting for reset
ceph_client_reset_unblocked - caller unblocked after reset
All tracepoints use a null-safe access for monc.auth->global_id
to guard against early-init or late-teardown edge cases.
Signed-off-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
f2fs_recover_orphan_inodes() trusts the orphan block entry_count when
replaying orphan inodes from the checkpoint pack. A corrupted entry_count
larger than F2FS_ORPHANS_PER_BLOCK makes the recovery loop read past the
ino[] array and interpret footer or following data as inode numbers.
On a crafted image, mounting an unpatched kernel can drive orphan recovery
into f2fs_bug_on() and panic the kernel. Validate entry_count before
consuming entries so corrupted checkpoint data fails the mount with
-EFSCORRUPTED and requests fsck instead.
Set ERROR_INCONSISTENT_ORPHAN as well, so the corruption reason can be
recorded in the superblock s_errors[] field. This gives fsck a persistent
hint even though mount-time orphan recovery failure may leave no chance to
persist SBI_NEED_FSCK through a checkpoint.
Cc: stable@kernel.org
Fixes: 127e670abfa7 ("f2fs: add checkpoint operations")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Add trace_f2fs_fault_report to trigger reporting upon f2fs_bug_on,
need_fsck, stop_checkpoint, and handle_eio. Since f2fs_bug_on and
need_fsck can be triggered in hundreds of scenarios, define set_sbi_flag
as a macro to help capture the effective fault function and line number.
Signed-off-by: shengyong1 <shengyong1@xiaomi.com>
Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"
* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 7.2-rc1.
Overall we end up removing more code than added, due to an obsolete
synclink_gt driver being removed from the tree, always a nice thing to
see happen.
Other than that driver removal, major things included in here are:
- max310x serial driver updates and fixes
- 8250 driver updates and rework in places to make it more "modern"
- dts file updates
- serial driver core tweaks and updates
- vt code cleanups
- vc_screen crash fixes
- other minor driver updates and cleanups
All of these have been in linux-next for well over a week with no
reported issues"
* tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
serial: 8250_pci: Don't specify conflicting values to pci_device_id members
vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write
serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero
vt: merge ucs_is_zero_width()/ucs_is_double_width() into ucs_get_width()
serial: 8250: fix possible ISR soft lockup
dt-bindings: serial: rs485: remove deprecated .txt binding stub
serial: qcom-geni: trace: Add tracepoint support for Qualcomm GENI serial
tty: serial: Use named initializers for arrays of i2c_device_data
serial: 8250_dw: remove clock-notifier infrastructure
serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails
amba/serial: amba-pl011: Bring back zx29 UART support
serial: 8250: Add support for console flow control
serial: 8250: Check LSR timeout on console flow control
serial: 8250: Set cons_flow on port registration
tty: serial: 8250: protect against NULL uart->port.dev in register
arm64: dts: add support for A9 based Amlogic BY401
dt-bindings: arm: amlogic: add A311Y3 support
serial: max310x: fix compile errors if CONFIG_SPI_MASTER is disabled
serial: qcom-geni: Avoid probing debug console UART without console support
serial: max310x: add comments for PLL limits
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net. This batches
fixes for real crashes with trivial/correctness fixes. There is too
a rework of the conntrack expectation timeout strategy to deal with
a possible race when removing an expectation.
1) Fix the incorrect flowtable timeout extension for entries in
hw offload, from Adrian Bente. This is correcting a defect in
the functionality, no crash.
2) Hold reference to device under the fake dst in br_netfilter,
from Haoze Xie. This is fixing a possible UaF if the device
is removed while packet is sitting in nfqueue.
3) Reject template conntrack in xt_cluster, otherwise access to
uninitialize conntrack fields are possible leading to WARN_ON
due to unset layer 3 protocol. From Wyatt Feng.
4) Make sure the IPv6 tunnel header is in the linear skb data
area before pulling. While at it remove incomplete NEXTHDR_DEST
support. From Lorenzo Bianconi. This possibly leading to crash
if IPv4 header is not in the linear area.
5) Use test_bit_acquire in ipset hash set to avoid reordering
of subsequent memory access. This is addressing a LLM related
report, no crash has been observed. From Jozsef Kadlecsik.
6) Use test_bit_acquire in ipset bitmap set too, for the same
reason as in the previous patch, from Jozsef Kadlecsik.
7) Call kfree_rcu() after rcu_assign_pointer() to address a
possible UaF if kfree_rcu() runs inmediately, which to my
understanding never happens. Never observed in practise,
reported by LLM. Also from Jozsef Kadlecsik.
8) Use disable_delayed_work_sync() instead cancel_delayed_work_sync()
to avoid that ipset GC handler re-queues work as reported by LLM.
From Jozsef Kadlecsik. This is for correctness.
9) Restore the check in nft_payload for exceeding payloda offset
over 2^16. From Florian Westphal. This fixes a silent truncation,
not a big deal, but better be assertive and reject it.
10) Validate NFT_META_BRI_IIFHWADDR can only run from bridge
prerouting. From Florian Westphal. Harmless but it could allow
to read bytes from skb->cb.
11) Zero out destination hardware address during the flowtable
path setup, also from Florian. This is a correctness fix, LLM
points that possible infoleak can happen but topology to achieve
it is not clear.
12) Skip IPv4 options if present when building the IPV4 reject reply.
Otherwise bytes in the IPv4 options header can be sent back to
origin where the ICMP header is being expected. Again from
Florian Westphal.
13) Replace timer API for expectation by GC worker approach. This
is implicitly fixing a race between nf_ct_remove_expectations()
which might fail to remove the expectation due to timer_del()
returning false because timer has expired and callback is
being run concurrently. This fix is addressing a crash that has
been already reported with a reproducer.
14) Check if br_vlan_get_pvid_rcu() fails, otherwise possible stack
infoleak of 4-bytes. From Florian Westphal.
* tag 'nf-26-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_meta_bridge: fix NFT_META_BRI_IIFPVID stack leak
netfilter: nf_conntrack_expect: use conntrack GC to reap expectations
netfilter: nf_reject: skip iphdr options when looking for icmp header
netfilter: nft_flow_offload: zero device address for non-ether case
netfilter: nft_meta_bridge: add validate callback for get operations
netfilter: nft_payload: reject offsets exceeding 65535 bytes
netfilter: ipset: make sure gc is properly stopped
netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer()
netfilter: ipset: Don't use test_bit() in lockless RCU readers in bitmap types
netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types
netfilter: flowtable: fix and simplify IP6IP6 tunnel handling
netfilter: xt_cluster: reject template conntracks in hash match
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
netfilter: flowtable: fix offloaded ct timeout never being extended
====================
Link: https://patch.msgid.link/20260620222738.112506-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull more i2c updates from Andi Shyti:
"Cleanups:
- generic cleanups in qcom, qcom-cci and pxa, plus core cleanups in
algo-bit and atr
Fixes:
- davinci: clean up cpufreq notifier on probe failure
- imx-lpi2c: suspend the adapter while hardware is powered down
- ls2x-v2: return IRQ_HANDLED after servicing error interrupts
- stm32f7: fix timing calculation accuracy
DT bindings:
- microchip: permit resets
- i2c-mux-pinctrl: update maintainer entry
- i2c-mux-reg: convert bindings to DT schema"
* tag 'i2c-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: pxa: Use named initializers for the platform_device_id array
i2c: imx-lpi2c: mark I2C adapter when hardware is powered down
i2c: stm32f7: truncate clock period instead of rounding it
dt-bindings: i2c: microchip,corei2c: permit resets
i2c: qcom: Unify user-visible "Qualcomm" name
i2c: ls2x-v2: return IRQ_HANDLED after servicing an error
i2c: atr: annotate i2c_atr_adap_desc->aliases with __counted_by_ptr
i2c: algo: bit: use str_plural helper in bit_xfer
dt-bindings: i2c: i2c-mux-pinctrl: change maintainer
dt-bindings: i2c: convert i2c-mux-reg to DT schema
i2c: davinci: Unregister cpufreq notifier on probe failure
i2c: qcom-cci: Remove overcautious disable_irq() calls
i2c: qcom-cci: Move cci_init() under cci_reset() function
i2c: qcom-cci: Do not check return value of cci_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This cycle, there was a lot of work around the mipi-i3c-hci driver
that also led to improvements of the core. We also have support for a
new SoC, the Microchip SAMA7D65. And of course, there are small fixes
for the other controller drivers.
Subsystem:
- introduce dynamic address reconciliation after DAA
- add preliminary API for hub support
- fixes for dev_nack_retry_count handling
- move hot-join support in the core instead of open coding in
different drivers
Drivers:
- mipi-i3c-hci-pci: DMA abort, recovery and related improvements,
hot-join support, Microchip SAMA7D65 support, fix possible race in
IBI handling
- dw-i3c-master: fix IBI count register selection for versalnet
- svc: interrupt handling fixes for NPCM845"
* tag 'i3c/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (45 commits)
i3c: mipi-i3c-hci: Use named initializers for platform_device_id's .driver_data
i3c: master: Use unsigned int for dev_nack_retry_count consistently
i3c: master: Add missing runtime PM get in dev_nack_retry_count_store()
i3c: master: Update dev_nack_retry_count under maintenance lock
i3c: master: Expose the APIs to support I3C hub
i3c: master: rename i3c_master_reattach_i3c_dev() to *_locked
i3c: mipi-i3c-hci: add microchip sama7d65 SoC compatible with the required quirk
dt-bindings: i3c: mipi-i3c-hci: add Microchip SAMA7D65 compatible
i3c: Consistently define pci_device_ids using named initializers
i3c: master: Reconcile dynamic addresses after DAA
i3c: master: Move DAA API functions after i3c_master_add_i3c_dev_locked()
i3c: master: Make i3c_master_add_i3c_dev_locked() return void
i3c: mipi-i3c-hci: Tolerate i3c_master_add_i3c_dev_locked() failures in DAA
i3c: master: Prevent reuse of dynamic address on device add failure
i3c: mipi-i3c-hci: Ignore DISEC failures when disabling IBIs
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c: mipi-i3c-hci: Add Hot-Join support
i3c: master: Export i3c_master_enec_disec_locked()
i3c: master: Defer new-device registration out of DAA caller context
i3c: dw: Drop redundant Hot-Join cancel_work_sync() in shutdown
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull more slab updates from Vlastimil Babka:
- Introduce and wire up a new alloc_flags parameter for modifying
slab-specific behavior without adding or reusing gfp flags. Also
introduce slab_alloc_context to keep function parameter bloat in
check. Both are similar to what the page allocator does.
kmalloc_flags() exposes alloc_flags for mm-internal users.
- SLAB_ALLOC_NOLOCK flag is used to implement kmalloc_nolock()
behavior without relying on lack of __GFP_RECLAIM, which caused
false positives with workarounds like fd3634312a04 ("debugobject:
Make it work with deferred page initialization - again").
- SLAB_ALLOC_NO_RECURSE replaces __GFP_NO_OBJ_EXT, which could have
been removed, but pending memory allocation profiling changes in
mm tree have grown a new user - there is however a work ongoing
to replace that too, so __GFP_NO_OBJ_EXT should eventually be
removed. (Vlastimil Babka)
- Add kmem_buckets_alloc_track_caller() with a user to be added in the
net tree (Pedro Falcato)
- Fixes for kernel-doc and slabinfo (Randy Dunlap, Yichong Chen)
* tag 'slab-for-7.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
tools/mm/slabinfo: fix total_objects attribute name
slab: recognize @GFP parameter as optional in kernel-doc
mm/slab: add a node-track-caller variant for kmem buckets allocation
mm/slab: replace __GFP_NO_OBJ_EXT with SLAB_ALLOC_NO_RECURSE for sheaves
mm/slab: remove __GFP_NO_OBJ_EXT usage from alloc_slab_obj_exts()
mm/slab: introduce kmalloc_flags()
mm/slab: allow __GFP_NOMEMALLOC and __GFP_NOWARN for kmalloc_nolock()
mm/slab: pass slab_alloc_context to __do_kmalloc_node()
mm/slab: allow kmem_cache_alloc_bulk() with any gfp flags
mm/slab: replace slab_alloc_node() parameters with slab_alloc_context
mm/slab: pass alloc_flags through slab_post_alloc_hook() chain
mm/slab: pass alloc_flags to new slab allocation
mm/slab: add alloc_flags to slab_alloc_context
mm/slab: replace struct partial_context with slab_alloc_context
mm/slab: introduce alloc_flags and SLAB_ALLOC_NOLOCK
mm/slab: introduce slab_alloc_context
mm/slab: stop inlining __slab_alloc_node()
mm/slab: do not init any kfence objects on allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- consolidate s390 idle time accounting by moving all CPU time tracking
to the architecture backend and eliminate the mix of architecture-
specific and common code accounting
- Add missing EXPORT_SYMBOL_GPL() to kcpustat_field_idle() and
kcpustat_field_iowait() functions
- Finalize ptep_get() conversion by replacing direct page table entry
dereferencing with proper accessors (ptep_get(), pmdp_get(), etc.)
- Explicitly check the buffer length in PKEY_VERIFYPROTK ioctl and
pkey_pckmo implementations and fail if the length is exceeded
* tag 's390-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pkey: Check length in pkey_pckmo handler implementation
s390/pkey: Check length in PKEY_VERIFYPROTK ioctl
s390/idle: Add missing EXPORT_SYMBOL_GPL()
s390/mm: Complete ptep_get() conversion
s390/idle: Remove idle time and count sysfs files
s390/idle: Provide arch specific kcpustat_field_idle()/kcpustat_field_iowait()
s390/irq/idle: Use stcke instead of stckf for time stamps
s390/timex: Move union tod_clock type to separate header
|
|
There are no remaining users of the atomic_reset hook. Remove it
from the core.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-78-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
All drivers have been converted to the atomic_create_state callback
and its drm_atomic_helper_bridge_create_state() helper.
Remove the deprecated drm_atomic_helper_bridge_reset().
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-74-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The drm_atomic_helper_bridge_reset() helper is deprecated in favour
of the new atomic_create_state callback.
Add drm_atomic_helper_bridge_create_state() as the counterpart helper
for this new callback, and make drm_atomic_helper_bridge_reset() call
this new helper.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-7-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Commit 47b5ac7daa46 ("drm/atomic: Add new atomic_create_state callback
to drm_private_obj") introduced a new pattern for allocating drm object
states: atomic_create_state, a dedicated hook that allocates and
initializes a pristine state without any side effect.
The bridge atomic_reset callback is already fallible and in practice
only allocates and initializes state without touching hardware.
However, the reset name does not make this contract clear: callers
and implementers cannot tell from the name alone whether the hardware
will be affected or when the hook is safe to call.
Add an atomic_create_state callback to drm_bridge_funcs to make the
contract explicit: allocate a pristine state, initialize it, no side
effects. The core calls it when available, falling back to
atomic_reset otherwise.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-6-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
arguments
The convention for state init helpers is to pass the state pointer
as the first argument and the object pointer second.
__drm_atomic_helper_bridge_state_init() has them in the opposite
order. Swap the arguments to follow the convention, and update the
cdns-mhdp8546 caller.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-4-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
__drm_atomic_helper_bridge_reset() is used to initialize a
newly allocated drm_bridge_state, and is being typically called by the
drm_bridge_funcs.atomic_reset implementation.
Since we want to consolidate DRM objects state allocation around the
atomic_create_state callback that will only allocate and initialize a
new drm_bridge_state instance, we will need to call
__drm_atomic_helper_bridge_reset() from both the atomic_reset and
atomic_create_state hooks.
To avoid any confusion, we can thus rename
__drm_atomic_helper_bridge_reset() to
__drm_atomic_helper_bridge_state_init().
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-3-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Add the peripheral clock ID definition for the Real-Time Clock (PCLKRTC)
on the Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs.
Note that the PCLKRTC clock is utilized as the operating clock source
for the RTC IP.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260615143943.1610095-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the LCDC clockd (LCDC_CLKD) definition for the Renesas RZ/T2H
(R9A09G077) and RZ/N2H (R9A09G087) SoCs. LCDC_CLKD is used as the
operating clock for LCDC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260615104845.4122868-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
When build testing on ARM without the PMC driver, the other drivers
fail to link:
ld.lld: error: undefined symbol: tegra_pmc_core_domain_state_synced
>>> referenced by regulators-tegra30.c
>>> drivers/soc/tegra/regulators-tegra30.o:(tegra30_regulator_balance_voltage) in archive vmlinux.a
>>> referenced by regulators-tegra20.c
>>> drivers/soc/tegra/regulators-tegra20.o:(tegra20_core_rtc_update) in archive vmlinux.a
Adapt the checks in the header to cover both cases on other architectures
and without PMC.
Fixes: 8318af5dd29c ("soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add additional Error components supported by XE drm_ras (Reliability,
Availability and Serviceability).
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Reviewed-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260618060633.2790109-9-riana.tauro@intel.com
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
|
|
kmalloc_flex() in metadata_dst_alloc() sets __counted_by for the
structure to the options_len, which is then initialized to zero.
Later, we're initializing the structure by copying the tunnel info
together with the options, and this triggers a warning for a potential
memcpy overflow, since the compiler estimates that the options can't
fit into the structure, even though the memory for them is actually
allocated.
memcpy: detected buffer overflow: 104 byte write of buffer size 96
WARNING: CPU: X PID: Y at lib/string_helpers.c:1036 __fortify_report
skb_tunnel_info_unclone+0x179/0x190
geneve_xmit+0x7fe/0xe00
The issue is triggered when built with clang and source fortification.
Fix that by doing the copy in two stages: first - the main data with
the options_len, then the options. This way the correct length should
be known at the time of the copy.
It would be better if the options_len never changed after allocation,
but the allocation code is a little separate from the initialization
and it would be awkward and potentially dangerous to return a struct
with options_len set to a non-zero value from the metadata_dst_alloc().
Another option would be to use ip_tunnel_info_opts_set(), but it is
doing too many unnecessary operations for the use case here.
Fixes: 69050f8d6d07 ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Reported-by: Johan Thomsen <write@ownrisk.dk>
Closes: https://lore.kernel.org/netdev/CAKv6aAM8_EWgXScnKmKYm_4SwGDVBK++dzfP+Y6msUXbp99QUw@mail.gmail.com/
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260616100332.1308294-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"NAND changes:
- Extend SPI NAND continuous read to Winbond devices, which requires
numerous changes in the spi-{mem,nand} layers such as the need for
a secondary read operation template
- Continuous reads in general have also been enhanced/fixed for
avoiding potential issues at probe time and at block boundaries
SPI NOR changes:
- Big set of cleanups and improvements to the locking support.
This series contains some cleanups and bug fixes for code and
documentation around write protection. Then support is added for
complement locking, which allows finer grained configuration of
what is considered locked and unlocked. Then complement locking is
enabled on a bunch of Winbond W25 flashes
- Fix die erase support on Spansion flashes.
Die erase is only supported on multi-die flashes, but the die erase
opcode was set for all. When the opcode is set, it overrides the
default chip erase opcode which should be used for single-die
flashes. Only set the opcode on multi-die flashes. Also, the opcode
was not set on multi-die s28hx-t flashes. Set it so they can use
die-erase correctly
General changes:
- A few drivers and mappings have been removed following SoCs support
removal
- And again, there is the usual load of misc improvements and fixes"
* tag 'mtd/for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (63 commits)
mtd: cfi: Use common error handling code in two functions
mtd: slram: simplify register_device() cleanup
mtd: slram: remove failed entries from the device list
mtd: rawnand: ndfc: use ioread32be/iowrite32be and allow COMPILE_TEST
mtd: spi-nor: spansion: add die erase support in s28hx-t
mtd: spi-nor: spansion: use die erase for multi-die devices only
mtd: spi-nor: winbond: Add W25Q02NWxxIM CMP locking support
mtd: spi-nor: winbond: Add W25Q01NWxxIM CMP locking support
mtd: spi-nor: winbond: Add W25Q01NWxxIQ CMP locking support
mtd: spi-nor: winbond: Add W25H02NWxxAM CMP locking support
mtd: spi-nor: winbond: Add W25H01NWxxAM CMP locking support
mtd: spi-nor: winbond: Add W25H512NWxxAM CMP locking support
mtd: spi-nor: Add steps for testing locking with CMP
mtd: spi-nor: swp: Add support for the complement feature
mtd: spi-nor: Add steps for testing locking support
mtd: maps: remove obsolete impa7 map driver
mtd: maps: remove uclinux map driver
mtd: maps: remove AMD Élan specific drivers
mtd: inftlmount: convert printk(KERN_WARNING) to pr_warn
mtd: Consistently define pci_device_ids
...
|
|
This reverts commit 7b32f64bc512b40b268776c5ac4d354b325b3197.
This patch caused a significant performance regression, so revert it, and
we can determine whether the approach is sensible or not moving forwards,
and if so how to avoid this.
There was a merge conflict with commit de97ae6222c1 ("mm/readahead: no
PG_readahead on EOF"), care was taken to ensure that the revert retained
the behaviour of this patch and cleanly reverts commit 7b32f64bc512 ("mm:
limit filemap_fault readahead to VMA boundaries") only.
Link: https://lore.kernel.org/20260619112852.104213-1-ljs@kernel.org
Fixes: 7b32f64bc512 ("mm: limit filemap_fault readahead to VMA boundaries")
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202606181547.617a6967-lkp@intel.com
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After READ_ONLY_THP_FOR_FS is removed, FS either supports large folio or
not. folio_split() can be used on a FS with large folio support without
worrying about getting a THP on a FS without large folio support.
When READ_ONLY_THP_FOR_FS was present, a PMD large pagecache folio can
appear in a FS without large folio support after khugepaged or
madvise(MADV_COLLAPSE) creates it. During truncate_inode_partial_folio(),
such a PMD large pagecache folio is split and if the FS does not support
large folio, it needs to be split to order-0 ones and could not be split
non uniformly to ones with various orders. try_folio_split_to_order() was
added to handle this situation by checking folio_check_splittable(...,
SPLIT_TYPE_NON_UNIFORM) to detect if the large folio is created due to
READ_ONLY_THP_FOR_FS and the FS does not support large folio. Now
READ_ONLY_THP_FOR_FS is removed, all large pagecache folios are created
with FSes supporting large folio, this function is no longer needed and
all large pagecache folios can be split non uniformly.
Link: https://lore.kernel.org/20260517135416.1434539-10-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
filemap_nr_thps*() are removed, the related field, address_space->nr_thps,
is no longer needed. Remove it. This shrinks struct address_space by 8
bytes on 64-bit systems which may increase the number of inodes we can
cache.
Link: https://lore.kernel.org/20260517135416.1434539-8-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Nico Pache <npache@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Liam Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
