// SPDX-License-Identifier: GPL-2.0-only /* * AT and PS/2 keyboard driver * * Copyright (c) 1999-2002 Vojtech Pavlik * * This driver can handle standard AT keyboards and PS/2 keyboards in * Translated and Raw Set 2 and Set 3, as well as AT keyboards on dumb * input-only controllers and AT keyboards connected over a one way RS232 * converter. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #define DRIVER_DESC "AT and PS/2 keyboard driver" MODULE_AUTHOR("Vojtech Pavlik "); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); static int atkbd_set = 2; module_param_named(set, atkbd_set, int, 0); MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)"); #if defined(__i386__) || defined(__x86_64__) || defined(__hppa__) || defined(__loongarch__) static bool atkbd_reset; #else static bool atkbd_reset = true; #endif module_param_named(reset, atkbd_reset, bool, 0); MODULE_PARM_DESC(reset, "Reset keyboard during initialization"); static bool atkbd_softrepeat; module_param_named(softrepeat, atkbd_softrepeat, bool, 0); MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat"); static bool atkbd_softraw = true; module_param_named(softraw, atkbd_softraw, bool, 0); MODULE_PARM_DESC(softraw, "Use software generated rawmode"); static bool atkbd_scroll; module_param_named(scroll, atkbd_scroll, bool, 0); MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards"); static bool atkbd_extra; module_param_named(extra, atkbd_extra, bool, 0); MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards"); static bool atkbd_terminal; module_param_named(terminal, atkbd_terminal, bool, 0); MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2"); #define SCANCODE(keymap) (((keymap) >> 16) & 0xFFFF) #define KEYCODE(keymap) ((keymap) & 0xFFFF) /* * Scancode to keycode tables. These are just the default setting, and * are loadable via a userland utility. */ #define ATKBD_KEYMAP_SIZE 512 static const unsigned short atkbd_set2_keycode[ATKBD_KEYMAP_SIZE] = { 0, 67, 65, 63, 61, 59, 60, 88,183, 68, 66, 64, 62, 15, 41,117, 184, 56, 42, 93, 29, 16, 2, 0,185, 0, 44, 31, 30, 17, 3, 0, 186, 46, 45, 32, 18, 5, 4, 95,187, 57, 47, 33, 20, 19, 6,183, 188, 49, 48, 35, 34, 21, 7,184,189, 0, 50, 36, 22, 8, 9,185, 190, 51, 37, 23, 24, 11, 10, 0,191, 52, 53, 38, 39, 25, 12, 0, 192, 89, 40, 0, 26, 13, 0,193, 58, 54, 28, 27, 0, 43, 0,194, 0, 86, 91, 90, 92, 0, 14, 94, 0, 79,124, 75, 71,121, 0, 0, 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125, 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127, 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142, 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0, 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112, 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0, 0, 0, 0, 65, 99, }; static const unsigned short atkbd_set3_keycode[ATKBD_KEYMAP_SIZE] = { 0, 0, 0, 0, 0, 0, 0, 59, 1,138,128,129,130, 15, 41, 60, 131, 29, 42, 86, 58, 16, 2, 61,133, 56, 44, 31, 30, 17, 3, 62, 134, 46, 45, 32, 18, 5, 4, 63,135, 57, 47, 33, 20, 19, 6, 64, 136, 49, 48, 35, 34, 21, 7, 65,137,100, 50, 36, 22, 8, 9, 66, 125, 51, 37, 23, 24, 11, 10, 67,126, 52, 53, 38, 39, 25, 12, 68, 113,114, 40, 43, 26, 13, 87, 99, 97, 54, 28, 27, 43, 43, 88, 70, 108,105,119,103,111,107, 14,110, 0, 79,106, 75, 71,109,102,104, 82, 83, 80, 76, 77, 72, 69, 98, 0, 96, 81, 0, 78, 73, 55,183, 184,185,186,187, 74, 94, 92, 93, 0, 0, 0,125,126,127,112, 0, 0,139,172,163,165,115,152,172,166,140,160,154,113,114,167,168, 148,149,147,140 }; static const u8 atkbd_unxlate_table[128] = { 0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13, 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27, 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42, 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88, 5, 6, 4, 12, 3, 11, 2, 10, 1, 9,119,126,108,117,125,123,107,115,116,121,105, 114,122,112,113,127, 96, 97,120, 7, 15, 23, 31, 39, 47, 55, 63, 71, 79, 86, 94, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111, 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110 }; #define ATKBD_CMD_SETLEDS 0x10ed #define ATKBD_CMD_GSCANSET 0x11f0 #define ATKBD_CMD_SSCANSET 0x10f0 #define ATKBD_CMD_GETID 0x02f2 #define ATKBD_CMD_SETREP 0x10f3 #define ATKBD_CMD_ENABLE 0x00f4 #define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */ #define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */ #define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */ #define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */ #define ATKBD_CMD_RESET_BAT 0x02ff #define ATKBD_CMD_RESEND 0x00fe #define ATKBD_CMD_EX_ENABLE 0x10ea #define ATKBD_CMD_EX_SETLEDS 0x20eb #define ATKBD_CMD_OK_GETID 0x02e8 #define ATKBD_RET_ACK 0xfa #define ATKBD_RET_NAK 0xfe #define ATKBD_RET_BAT 0xaa #define ATKBD_RET_EMUL0 0xe0 #define ATKBD_RET_EMUL1 0xe1 #define ATKBD_RET_RELEASE 0xf0 #define ATKBD_RET_HANJA 0xf1 #define ATKBD_RET_HANGEUL 0xf2 #define ATKBD_RET_ERR 0xff #define ATKBD_KEY_UNKNOWN 0 #define ATKBD_KEY_NULL 255 #define ATKBD_SCR_1 0xfffe #define ATKBD_SCR_2 0xfffd #define ATKBD_SCR_4 0xfffc #define ATKBD_SCR_8 0xfffb #define ATKBD_SCR_CLICK 0xfffa #define ATKBD_SCR_LEFT 0xfff9 #define ATKBD_SCR_RIGHT 0xfff8 #define ATKBD_SPECIAL ATKBD_SCR_RIGHT #define ATKBD_LED_EVENT_BIT 0 #define ATKBD_REP_EVENT_BIT 1 #define ATKBD_XL_ERR 0x01 #define ATKBD_XL_BAT 0x02 #define ATKBD_XL_ACK 0x04 #define ATKBD_XL_NAK 0x08 #define ATKBD_XL_HANGEUL 0x10 #define ATKBD_XL_HANJA 0x20 static const struct { unsigned short keycode; u8 set2; } atkbd_scroll_keys[] = { { ATKBD_SCR_1, 0xc5 }, { ATKBD_SCR_2, 0x9d }, { ATKBD_SCR_4, 0xa4 }, { ATKBD_SCR_8, 0x9b }, { ATKBD_SCR_CLICK, 0xe0 }, { ATKBD_SCR_LEFT, 0xcb }, { ATKBD_SCR_RIGHT, 0xd2 }, }; /* * The atkbd control structure */ struct atkbd { struct ps2dev ps2dev; struct input_dev *dev; /* Written only during init */ char name[64]; char phys[32]; unsigned short id; unsigned short keycode[ATKBD_KEYMAP_SIZE]; DECLARE_BITMAP(force_release_mask, ATKBD_KEYMAP_SIZE); u8 set; bool translated; bool extra; bool write; bool softrepeat; bool softraw; bool scroll; bool enabled; /* Accessed only from interrupt */ u8 emul; bool resend; bool release; unsigned long xl_bit; unsigned int last; unsigned long time; unsigned long err_count; struct delayed_work event_work; unsigned long event_jiffies; unsigned long event_mask; /* Serializes reconnect(), attr->set() and event work */ struct mutex mutex; struct vivaldi_data vdata; }; /* * System-specific keymap fixup routine */ static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); static void *atkbd_platform_fixup_data; static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int); /* * Certain keyboards to not like ATKBD_CMD_RESET_DIS and stop responding * to many commands until full reset (ATKBD_CMD_RESET_BAT) is performed. */ static bool atkbd_skip_deactivate; static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, ssize_t (*handler)(struct atkbd *, char *)); static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, ssize_t (*handler)(struct atkbd *, const char *, size_t)); #define ATKBD_DEFINE_ATTR(_name) \ static ssize_t atkbd_show_##_name(struct atkbd *, char *); \ static ssize_t atkbd_set_##_name(struct atkbd *, const char *, size_t); \ static ssize_t atkbd_do_show_##_name(struct device *d, \ struct device_attribute *attr, char *b) \ { \ return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \ } \ static ssize_t atkbd_do_set_##_name(struct device *d, \ struct device_attribute *attr, const char *b, size_t s) \ { \ return atkbd_attr_set_helper(d, b, s, atkbd_set_##_name); \ } \ static struct device_attribute atkbd_attr_##_name = \ __ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name) ATKBD_DEFINE_ATTR(extra); ATKBD_DEFINE_ATTR(force_release); ATKBD_DEFINE_ATTR(scroll); ATKBD_DEFINE_ATTR(set); ATKBD_DEFINE_ATTR(softrepeat); ATKBD_DEFINE_ATTR(softraw); #define ATKBD_DEFINE_RO_ATTR(_name) \ static ssize_t atkbd_show_##_name(struct atkbd *, char *); \ static ssize_t atkbd_do_show_##_name(struct device *d, \ struct device_attribute *attr, char *b) \ { \ return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \ } \ static struct device_attribute atkbd_attr_##_name = \ __ATTR(_name, S_IRUGO, atkbd_do_show_##_name, NULL) ATKBD_DEFINE_RO_ATTR(err_count); ATKBD_DEFINE_RO_ATTR(function_row_physmap); static struct attribute *atkbd_attributes[] = { &atkbd_attr_extra.attr, &atkbd_attr_force_release.attr, &atkbd_attr_scroll.attr, &atkbd_attr_set.attr, &atkbd_attr_softrepeat.attr, &atkbd_attr_softraw.attr, &atkbd_attr_err_count.attr, &atkbd_attr_function_row_physmap.attr, NULL }; static ssize_t atkbd_show_function_row_physmap(struct atkbd *atkbd, char *buf) { return vivaldi_function_row_physmap_show(&atkbd->vdata, buf); } static struct atkbd *atkbd_from_serio(struct serio *serio) { struct ps2dev *ps2dev = serio_get_drvdata(serio); return container_of(ps2dev, struct atkbd, ps2dev); } static umode_t atkbd_attr_is_visible(struct kobject *kobj, struct attribute *attr, int i) { struct device *dev = kobj_to_dev(kobj); struct serio *serio = to_serio_port(dev); struct atkbd *atkbd = atkbd_from_serio(serio); if (attr == &atkbd_attr_function_row_physmap.attr && !atkbd->vdata.num_function_row_keys) return 0; return attr->mode; } static const struct attribute_group atkbd_attribute_group = { .attrs = atkbd_attributes, .is_visible = atkbd_attr_is_visible, }; __ATTRIBUTE_GROUPS(atkbd_attribute); static const u8 xl_table[] = { ATKBD_RET_BAT, ATKBD_RET_ERR, ATKBD_RET_ACK, ATKBD_RET_NAK, ATKBD_RET_HANJA, ATKBD_RET_HANGEUL, }; /* * Checks if we should mangle the scancode to extract 'release' bit * in translated mode. */ static bool atkbd_need_xlate(unsigned long xl_bit, u8 code) { int i; if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1) return false; for (i = 0; i < ARRAY_SIZE(xl_table); i++) if (code == xl_table[i]) return test_bit(i, &xl_bit); return true; } /* * Calculates new value of xl_bit so the driver can distinguish * between make/break pair of scancodes for select keys and PS/2 * protocol responses. */ static void atkbd_calculate_xl_bit(struct atkbd *atkbd, u8 code) { int i; for (i = 0; i < ARRAY_SIZE(xl_table); i++) { if (!((code ^ xl_table[i]) & 0x7f)) { if (code & 0x80) __clear_bit(i, &atkbd->xl_bit); else __set_bit(i, &atkbd->xl_bit); break; } } } /* * Encode the scancode, 0xe0 prefix, and high bit into a single integer, * keeping kernel 2.4 compatibility for set 2 */ static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code) { if (atkbd->set == 3) { if (atkbd->emul == 1) code |= 0x100; } else { code = (code & 0x7f) | ((code & 0x80) << 1); if (atkbd->emul == 1) code |= 0x80; } return code; } /* * Tries to handle frame or parity error by requesting the keyboard controller * to resend the last byte. This historically not done on x86 as controllers * there typically do not implement this command. */ static bool __maybe_unused atkbd_handle_frame_error(struct ps2dev *ps2dev, u8 data, unsigned int flags) { struct atkbd *atkbd = container_of(ps2dev, struct atkbd, ps2dev); struct serio *serio = ps2dev->serio; if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) { dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags); serio_write(serio, ATKBD_CMD_RESEND); atkbd->resend = true; return true; } if (!flags && data == ATKBD_RET_ACK) atkbd->resend = false; return false; } static enum ps2_disposition atkbd_pre_receive_byte(struct ps2dev *ps2dev, u8 data, unsigned int flags) { struct serio *serio = ps2dev->serio; dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags); #if !defined(__i386__) && !defined(__x86_64__) if (atkbd_handle_frame_error(ps2dev, data, flags)) return PS2_IGNORE; #endif return PS2_PROCESS; } static void atkbd_receive_byte(struct ps2dev *ps2dev, u8 data) { struct serio *serio = ps2dev->serio; struct atkbd *atkbd = container_of(ps2dev, struct atkbd, ps2dev); struct input_dev *dev = atkbd->dev; unsigned int code = data; int scroll = 0, hscroll = 0, click = -1; int value; unsigned short keycode; pm_wakeup_event(&serio->dev, 0); if (!atkbd->enabled) return; input_event(dev, EV_MSC, MSC_RAW, code); if (atkbd_platform_scancode_fixup) code = atkbd_platform_scancode_fixup(atkbd, code); if (atkbd->translated) { if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) { atkbd->release = code >> 7; code &= 0x7f; } if (!atkbd->emul) atkbd_calculate_xl_bit(atkbd, data); } switch (code) { case ATKBD_RET_BAT: atkbd->enabled = false; serio_reconnect(atkbd->ps2dev.serio); return; case ATKBD_RET_EMUL0: atkbd->emul = 1; return; case ATKBD_RET_EMUL1: atkbd->emul = 2; return; case ATKBD_RET_RELEASE: atkbd->release = true; return; case ATKBD_RET_ACK: case ATKBD_RET_NAK: dev_warn_ratelimited(&serio->dev, "Spurious %s on %s. Some program might be trying to access hardware directly.\n", data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys); return; case ATKBD_RET_ERR: atkbd->err_count++; dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n", serio->phys); return; } code = atkbd_compat_scancode(atkbd, code); if (atkbd->emul && --atkbd->emul) return; keycode = atkbd->keycode[code]; if (!(atkbd->release && test_bit(code, atkbd->force_release_mask))) if (keycode != ATKBD_KEY_NULL) input_event(dev, EV_MSC, MSC_SCAN, code); switch (keycode) { case ATKBD_KEY_NULL: break; case ATKBD_KEY_UNKNOWN: dev_warn(&serio->dev, "Unknown key %s (%s set %d, code %#x on %s).\n", atkbd->release ? "released" : "pressed", atkbd->translated ? "translated" : "raw", atkbd->set, code, serio->phys); dev_warn(&serio->dev, "Use 'setkeycodes %s%02x ' to make it known.\n", code & 0x80 ? "e0" : "", code & 0x7f); input_sync(dev); break; case ATKBD_SCR_1: scroll = 1; break; case ATKBD_SCR_2: scroll = 2; break; case ATKBD_SCR_4: scroll = 4; break; case ATKBD_SCR_8: scroll = 8; break; case ATKBD_SCR_CLICK: click = !atkbd->release; break; case ATKBD_SCR_LEFT: hscroll = -1; break; case ATKBD_SCR_RIGHT: hscroll = 1; break; default: if (atkbd->release) { value = 0; atkbd->last = 0; } else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) { /* Workaround Toshiba laptop multiple keypress */ value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2; } else { value = 1; atkbd->last = code; atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2; } input_event(dev, EV_KEY, keycode, value); input_sync(dev); if (value && test_bit(code, atkbd->force_release_mask)) { input_event(dev, EV_MSC, MSC_SCAN, code); input_report_key(dev, keycode, 0); input_sync(dev); } } if (atkbd->scroll) { if (click != -1) input_report_key(dev, BTN_MIDDLE, click); input_report_rel(dev, REL_WHEEL, atkbd->release ? -scroll : scroll); input_report_rel(dev, REL_HWHEEL, hscroll); input_sync(dev); } atkbd->release = false; } static int atkbd_set_repeat_rate(struct atkbd *atkbd) { const short period[32] = { 33, 37, 42, 46, 50, 54, 58, 63, 67, 75, 83, 92, 100, 109, 116, 125, 133, 149, 167, 182, 200, 217, 232, 250, 270, 303, 333, 370, 400, 435, 470, 500 }; const short delay[4] = { 250, 500, 750, 1000 }; struct input_dev *dev = atkbd->dev; u8 param; int i = 0, j = 0; while (i < ARRAY_SIZE(period) - 1 && period[i] < dev->rep[REP_PERIOD]) i++; dev->rep[REP_PERIOD] = period[i]; while (j < ARRAY_SIZE(delay) - 1 && delay[j] < dev->rep[REP_DELAY]) j++; dev->rep[REP_DELAY] = delay[j]; param = i | (j << 5); return ps2_command(&atkbd->ps2dev, ¶m, ATKBD_CMD_SETREP); } static int atkbd_set_leds(struct atkbd *atkbd) { struct input_dev *dev = atkbd->dev; u8 param[2]; param[0] = (test_bit(LED_SCROLLL, dev->led) ? 1 : 0) | (test_bit(LED_NUML, dev->led) ? 2 : 0) | (test_bit(LED_CAPSL, dev->led) ? 4 : 0); if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_SETLEDS)) return -1; if (atkbd->extra) { param[0] = 0; param[1] = (test_bit(LED_COMPOSE, dev->led) ? 0x01 : 0) | (test_bit(LED_SLEEP, dev->led) ? 0x02 : 0) | (test_bit(LED_SUSPEND, dev->led) ? 0x04 : 0) | (test_bit(LED_MISC, dev->led) ? 0x10 : 0) | (test_bit(LED_MUTE, dev->led) ? 0x20 : 0); if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_EX_SETLEDS)) return -1; } return 0; } /* * atkbd_event_work() is used to complete processing of events that * can not be processed by input_event() which is often called from * interrupt context. */ static void atkbd_event_work(struct work_struct *work) { struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work); guard(mutex)(&atkbd->mutex); if (!atkbd->enabled) { /* * Serio ports are resumed asynchronously so while driver core * thinks that device is already fully operational in reality * it may not be ready yet. In this case we need to keep * rescheduling till reconnect completes. */ schedule_delayed_work(&atkbd->event_work, msecs_to_jiffies(100)); } else { if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask)) atkbd_set_leds(atkbd); if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask)) atkbd_set_repeat_rate(atkbd); } } /* * Schedule switch for execution. We need to throttle requests, * otherwise keyboard may become unresponsive. */ static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit) { unsigned long delay = msecs_to_jiffies(50); if (time_after(jiffies, atkbd->event_jiffies + delay)) delay = 0; atkbd->event_jiffies = jiffies; set_bit(event_bit, &atkbd->event_mask); mb(); schedule_delayed_work(&atkbd->event_work, delay); } /* * Event callback from the input module. Events that change the state of * the hardware are processed here. If action can not be performed in * interrupt context it is offloaded to atkbd_event_work. */ static int atkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) { struct atkbd *atkbd = input_get_drvdata(dev); if (!atkbd->write) return -1; switch (type) { case EV_LED: atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT); return 0; case EV_REP: if (!atkbd->softrepeat) atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT); return 0; default: return -1; } } /* * atkbd_enable() signals that interrupt handler is allowed to * generate input events. */ static inline void atkbd_enable(struct atkbd *atkbd) { guard(serio_pause_rx)(atkbd->ps2dev.serio); atkbd->enabled = true; } /* * atkbd_disable() tells input handler that all incoming data except * for ACKs and command response should be dropped. */ static inline void atkbd_disable(struct atkbd *atkbd) { guard(serio_pause_rx)(atkbd->ps2dev.serio); atkbd->enabled = false; } static int atkbd_activate(struct atkbd *atkbd) { struct ps2dev *ps2dev = &atkbd->ps2dev; /* * Enable the keyboard to receive keystrokes. */ if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) { dev_err(&ps2dev->serio->dev, "Failed to enable keyboard on %s\n", ps2dev->serio->phys); return -1; } return 0; } /* * atkbd_deactivate() resets and disables the keyboard from sending * keystrokes. */ static void atkbd_deactivate(struct atkbd *atkbd) { struct ps2dev *ps2dev = &atkbd->ps2dev; if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_DIS)) dev_err(&ps2dev->serio->dev, "Failed to deactivate keyboard on %s\n", ps2dev->serio->phys); } #ifdef CONFIG_X86 static bool atkbd_is_portable_device(void) { static const char * const chassis_types[] = { "8", /* Portable */ "9", /* Laptop */ "10", /* Notebook */ "14", /* Sub-Notebook */ "31", /* Convertible */ "32", /* Detachable */ }; int i; for (i = 0; i < ARRAY_SIZE(chassis_types); i++) if (dmi_match(DMI_CHASSIS_TYPE, chassis_types[i])) return true; return false; } /* * On many modern laptops ATKBD_CMD_GETID may cause problems, on these laptops * the controller is always in translated mode. In this mode mice/touchpads will * not work. So in this case simply assume a keyboard is connected to avoid * confusing some laptop keyboards. * * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using the standard * 0xab83 id is ok in translated mode, only atkbd_select_set() checks atkbd->id * and in translated mode that is a no-op. */ static bool atkbd_skip_getid(struct atkbd *atkbd) { return atkbd->translated && atkbd_is_portable_device(); } #else static inline bool atkbd_skip_getid(struct atkbd *atkbd) { return false; } #endif /* * atkbd_probe() probes for an AT keyboard on a serio port. */ static int atkbd_probe(struct atkbd *atkbd) { struct ps2dev *ps2dev = &atkbd->ps2dev; u8 param[2]; /* * Some systems, where the bit-twiddling when testing the io-lines of the * controller may confuse the keyboard need a full reset of the keyboard. On * these systems the BIOS also usually doesn't do it for us. */ if (atkbd_reset) if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT)) dev_warn(&ps2dev->serio->dev, "keyboard reset failed on %s\n", ps2dev->serio->phys); if (atkbd_skip_getid(atkbd)) { atkbd->id = 0xab83; goto deactivate_kbd; } /* * Then we check the keyboard ID. We should get 0xab83 under normal conditions. * Some keyboards report different values, but the first byte is always 0xab or * 0xac. Some old AT keyboards don't report anything. If a mouse is connected, this * should make sure we don't try to set the LEDs on it. */ param[0] = param[1] = 0xa5; /* initialize with invalid values */ if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) { /* * If the get ID command failed, we check if we can at least set * the LEDs on the keyboard. This should work on every keyboard out there. * It also turns the LEDs off, which we want anyway. */ param[0] = 0; if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) return -1; atkbd->id = 0xabba; return 0; } if (!ps2_is_keyboard_id(param[0])) return -1; atkbd->id = (param[0] << 8) | param[1]; if (atkbd->id == 0xaca1 && atkbd->translated) { dev_err(&ps2dev->serio->dev, "NCD terminal keyboards are only supported on non-translating controllers. Use i8042.direct=1 to disable translation.\n"); return -1; } deactivate_kbd: /* * Make sure nothing is coming from the keyboard and disturbs our * internal state. */ if (!atkbd_skip_deactivate) atkbd_deactivate(atkbd); return 0; } /* * atkbd_select_set checks if a keyboard has a working Set 3 support, and * sets it into that. Unfortunately there are keyboards that can be switched * to Set 3, but don't work well in that (BTC Multimedia ...) */ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra) { struct ps2dev *ps2dev = &atkbd->ps2dev; u8 param[2]; atkbd->extra = false; /* * For known special keyboards we can go ahead and set the correct set. * We check for NCD PS/2 Sun, NorthGate OmniKey 101 and * IBM RapidAccess / IBM EzButton / Chicony KBP-8993 keyboards. */ if (atkbd->translated) return 2; if (atkbd->id == 0xaca1) { param[0] = 3; ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET); return 3; } if (allow_extra) { param[0] = 0x71; if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) { atkbd->extra = true; return 2; } } if (atkbd_terminal) { ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB); return 3; } if (target_set != 3) return 2; if (!ps2_command(ps2dev, param, ATKBD_CMD_OK_GETID)) { atkbd->id = param[0] << 8 | param[1]; return 2; } param[0] = 3; if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET)) return 2; param[0] = 0; if (ps2_command(ps2dev, param, ATKBD_CMD_GSCANSET)) return 2; if (param[0] != 3) { param[0] = 2; if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET)) return 2; } ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MBR); return 3; } static int atkbd_reset_state(struct atkbd *atkbd) { struct ps2dev *ps2dev = &atkbd->ps2dev; u8 param[1]; /* * Set the LEDs to a predefined state (all off). */ param[0] = 0; if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) return -1; /* * Set autorepeat to fastest possible. */ param[0] = 0; if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP)) return -1; return 0; } /* * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a * reboot. */ static void atkbd_cleanup(struct serio *serio) { struct atkbd *atkbd = atkbd_from_serio(serio); atkbd_disable(atkbd); ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF); } /* * atkbd_disconnect() closes and frees. */ static void atkbd_disconnect(struct serio *serio) { struct atkbd *atkbd = atkbd_from_serio(serio); atkbd_disable(atkbd); input_unregister_device(atkbd->dev); /* * Make sure we don't have a command in flight. * Note that since atkbd->enabled is false event work will keep * rescheduling itself until it gets canceled and will not try * accessing freed input device or serio port. */ cancel_delayed_work_sync(&atkbd->event_work); serio_close(serio); serio_set_drvdata(serio, NULL); kfree(atkbd); } /* * generate release events for the keycodes given in data */ static void atkbd_apply_forced_release_keylist(struct atkbd *atkbd, const void *data) { const unsigned int *keys = data; unsigned int i; if (atkbd->set == 2) for (i = 0; keys[i] != -1U; i++) __set_bit(keys[i], atkbd->force_release_mask); } /* * Most special keys (Fn+F?) on Dell laptops do not generate release * events so we have to do it ourselves. */ static unsigned int atkbd_dell_laptop_forced_release_keys[] = { 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U }; /* * Perform fixup for HP system that doesn't generate release * for its video switch */ static unsigned int atkbd_hp_forced_release_keys[] = { 0x94, -1U }; /* * Samsung NC10,NC20 with Fn+F? key release not working */ static unsigned int atkbd_samsung_forced_release_keys[] = { 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U }; /* * Amilo Pi 3525 key release for Fn+Volume keys not working */ static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = { 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U }; /* * Amilo Xi 3650 key release for light touch bar not working */ static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U }; /* * Soltech TA12 system with broken key release on volume keys and mute key */ static unsigned int atkdb_soltech_ta12_forced_release_keys[] = { 0xa0, 0xae, 0xb0, -1U }; /* * Many notebooks don't send key release event for volume up/down * keys, with key list below common among them */ static unsigned int atkbd_volume_forced_release_keys[] = { 0xae, 0xb0, -1U }; /* * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas * they should be generating e4-e6 (0x80 | code). */ static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd, unsigned int code) { if (atkbd->translated && atkbd->emul == 1 && (code == 0x64 || code == 0x65 || code == 0x66)) { atkbd->emul = 0; code |= 0x80; } return code; } static int atkbd_get_keymap_from_fwnode(struct atkbd *atkbd) { struct device *dev = &atkbd->ps2dev.serio->dev; int i, n; u16 scancode, keycode; /* Parse "linux,keymap" property */ n = device_property_count_u32(dev, "linux,keymap"); if (n <= 0 || n > ATKBD_KEYMAP_SIZE) return -ENXIO; u32 *ptr __free(kfree) = kzalloc_objs(*ptr, n); if (!ptr) return -ENOMEM; if (device_property_read_u32_array(dev, "linux,keymap", ptr, n)) { dev_err(dev, "problem parsing FW keymap property\n"); return -EINVAL; } memset(atkbd->keycode, 0, sizeof(atkbd->keycode)); for (i = 0; i < n; i++) { scancode = SCANCODE(ptr[i]); keycode = KEYCODE(ptr[i]); if (scancode >= ATKBD_KEYMAP_SIZE) { dev_warn(dev, "invalid scancode %#x in FW keymap entry %d\n", scancode, i); return -EINVAL; } atkbd->keycode[scancode] = keycode; } return 0; } /* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set */ static void atkbd_set_keycode_table(struct atkbd *atkbd) { struct device *dev = &atkbd->ps2dev.serio->dev; unsigned int scancode; int i, j; memset(atkbd->keycode, 0, sizeof(atkbd->keycode)); bitmap_zero(atkbd->force_release_mask, ATKBD_KEYMAP_SIZE); if (!atkbd_get_keymap_from_fwnode(atkbd)) { dev_dbg(dev, "Using FW keymap\n"); } else if (atkbd->translated) { for (i = 0; i < 128; i++) { scancode = atkbd_unxlate_table[i]; atkbd->keycode[i] = atkbd_set2_keycode[scancode]; atkbd->keycode[i | 0x80] = atkbd_set2_keycode[scancode | 0x80]; if (atkbd->scroll) for (j = 0; j < ARRAY_SIZE(atkbd_scroll_keys); j++) if ((scancode | 0x80) == atkbd_scroll_keys[j].set2) atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode; } } else if (atkbd->set == 3) { memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode)); } else { memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode)); if (atkbd->scroll) for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) { scancode = atkbd_scroll_keys[i].set2; atkbd->keycode[scancode] = atkbd_scroll_keys[i].keycode; } } /* * HANGEUL and HANJA keys do not send release events so we need to * generate such events ourselves */ scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL); atkbd->keycode[scancode] = KEY_HANGEUL; __set_bit(scancode, atkbd->force_release_mask); scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA); atkbd->keycode[scancode] = KEY_HANJA; __set_bit(scancode, atkbd->force_release_mask); /* * Perform additional fixups */ if (atkbd_platform_fixup) atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data); } /* * atkbd_set_device_attrs() sets up keyboard's input device structure */ static void atkbd_set_device_attrs(struct atkbd *atkbd) { struct input_dev *input_dev = atkbd->dev; int i; if (atkbd->extra) snprintf(atkbd->name, sizeof(atkbd->name), "AT Set 2 Extra keyboard"); else snprintf(atkbd->name, sizeof(atkbd->name), "AT %s Set %d keyboard", atkbd->translated ? "Translated" : "Raw", atkbd->set); scnprintf(atkbd->phys, sizeof(atkbd->phys), "%s/input0", atkbd->ps2dev.serio->phys); input_dev->name = atkbd->name; input_dev->phys = atkbd->phys; input_dev->id.bustype = BUS_I8042; input_dev->id.vendor = 0x0001; input_dev->id.product = atkbd->translated ? 1 : atkbd->set; input_dev->id.version = atkbd->id; input_dev->event = atkbd_event; input_dev->dev.parent = &atkbd->ps2dev.serio->dev; input_set_drvdata(input_dev, atkbd); input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_MSC); if (atkbd->write) { input_dev->evbit[0] |= BIT_MASK(EV_LED); input_dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) | BIT_MASK(LED_SCROLLL); } if (atkbd->extra) input_dev->ledbit[0] |= BIT_MASK(LED_COMPOSE) | BIT_MASK(LED_SUSPEND) | BIT_MASK(LED_SLEEP) | BIT_MASK(LED_MUTE) | BIT_MASK(LED_MISC); if (!atkbd->softrepeat) { input_dev->rep[REP_DELAY] = 250; input_dev->rep[REP_PERIOD] = 33; } input_dev->mscbit[0] = atkbd->softraw ? BIT_MASK(MSC_SCAN) : BIT_MASK(MSC_RAW) | BIT_MASK(MSC_SCAN); if (atkbd->scroll) { input_dev->evbit[0] |= BIT_MASK(EV_REL); input_dev->relbit[0] = BIT_MASK(REL_WHEEL) | BIT_MASK(REL_HWHEEL); __set_bit(BTN_MIDDLE, input_dev->keybit); } input_dev->keycode = atkbd->keycode; input_dev->keycodesize = sizeof(atkbd->keycode[0]); input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode); for (i = 0; i < ATKBD_KEYMAP_SIZE; i++) { if (atkbd->keycode[i] != KEY_RESERVED && atkbd->keycode[i] != ATKBD_KEY_NULL && atkbd->keycode[i] < ATKBD_SPECIAL) { __set_bit(atkbd->keycode[i], input_dev->keybit); } } } static void atkbd_parse_fwnode_data(struct serio *serio) { struct atkbd *atkbd = atkbd_from_serio(serio); struct device *dev = &serio->dev; int n; /* Parse "function-row-physmap" property */ n = device_property_count_u32(dev, "function-row-physmap"); if (n > 0 && n <= VIVALDI_MAX_FUNCTION_ROW_KEYS && !device_property_read_u32_array(dev, "function-row-physmap", atkbd->vdata.function_row_physmap, n)) { atkbd->vdata.num_function_row_keys = n; dev_dbg(dev, "FW reported %d function-row key locations\n", n); } } /* * atkbd_connect() is called when the serio module finds an interface * that isn't handled yet by an appropriate device driver. We check if * there is an AT keyboard out there and if yes, we register ourselves * to the input module. */ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) { struct atkbd *atkbd; struct input_dev *dev; int err = -ENOMEM; atkbd = kzalloc_obj(*atkbd); dev = input_allocate_device(); if (!atkbd || !dev) goto fail1; atkbd->dev = dev; ps2_init(&atkbd->ps2dev, serio, atkbd_pre_receive_byte, atkbd_receive_byte); INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work); mutex_init(&atkbd->mutex); switch (serio->id.type) { case SERIO_8042_XL: atkbd->translated = true; fallthrough; case SERIO_8042: if (serio->write) atkbd->write = true; break; } atkbd->softraw = atkbd_softraw; atkbd->softrepeat = atkbd_softrepeat; atkbd->scroll = atkbd_scroll; if (atkbd->softrepeat) atkbd->softraw = true; serio_set_drvdata(serio, atkbd); err = serio_open(serio, drv); if (err) goto fail2; if (atkbd->write) { if (atkbd_probe(atkbd)) { err = -ENODEV; goto fail3; } atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra); atkbd_reset_state(atkbd); } else { atkbd->set = 2; atkbd->id = 0xab00; } atkbd_parse_fwnode_data(serio); atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); atkbd_enable(atkbd); if (serio->write) atkbd_activate(atkbd); err = input_register_device(atkbd->dev); if (err) goto fail3; return 0; fail3: serio_close(serio); fail2: serio_set_drvdata(serio, NULL); fail1: input_free_device(dev); kfree(atkbd); return err; } /* * atkbd_reconnect() tries to restore keyboard into a sane state and is * most likely called on resume. */ static int atkbd_reconnect(struct serio *serio) { struct atkbd *atkbd = atkbd_from_serio(serio); struct serio_driver *drv = serio->drv; int error; if (!atkbd || !drv) { dev_dbg(&serio->dev, "reconnect request, but serio is disconnected, ignoring...\n"); return -1; } guard(mutex)(&atkbd->mutex); atkbd_disable(atkbd); if (atkbd->write) { error = atkbd_probe(atkbd); if (error) return error; if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra)) return -EIO; /* * Restore LED state and repeat rate. While input core * will do this for us at resume time reconnect may happen * because user requested it via sysfs or simply because * keyboard was unplugged and plugged in again so we need * to do it ourselves here. */ atkbd_set_leds(atkbd); if (!atkbd->softrepeat) atkbd_set_repeat_rate(atkbd); } /* * Reset our state machine in case reconnect happened in the middle * of multi-byte scancode. */ atkbd->xl_bit = 0; atkbd->emul = 0; atkbd_enable(atkbd); if (atkbd->write) atkbd_activate(atkbd); return 0; } static const struct serio_device_id atkbd_serio_ids[] = { { .type = SERIO_8042, .proto = SERIO_ANY, .id = SERIO_ANY, .extra = SERIO_ANY, }, { .type = SERIO_8042_XL, .proto = SERIO_ANY, .id = SERIO_ANY, .extra = SERIO_ANY, }, { .type = SERIO_RS232, .proto = SERIO_PS2SER, .id = SERIO_ANY, .extra = SERIO_ANY, }, { 0 } }; MODULE_DEVICE_TABLE(serio, atkbd_serio_ids); static struct serio_driver atkbd_drv = { .driver = { .name = "atkbd", .dev_groups = atkbd_attribute_groups, }, .description = DRIVER_DESC, .id_table = atkbd_serio_ids, .interrupt = ps2_interrupt, .connect = atkbd_connect, .reconnect = atkbd_reconnect, .disconnect = atkbd_disconnect, .cleanup = atkbd_cleanup, }; static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, ssize_t (*handler)(struct atkbd *, char *)) { struct serio *serio = to_serio_port(dev); struct atkbd *atkbd = atkbd_from_serio(serio); return handler(atkbd, buf); } static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, ssize_t (*handler)(struct atkbd *, const char *, size_t)) { struct serio *serio = to_serio_port(dev); struct atkbd *atkbd = atkbd_from_serio(serio); int retval; scoped_guard(mutex_intr, &atkbd->mutex) { atkbd_disable(atkbd); retval = handler(atkbd, buf, count); atkbd_enable(atkbd); return retval; } return -EINTR; } static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf) { return sprintf(buf, "%d\n", atkbd->extra ? 1 : 0); } static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; unsigned int value; int err; bool old_extra; u8 old_set; if (!atkbd->write) return -EIO; err = kstrtouint(buf, 10, &value); if (err) return err; if (value > 1) return -EINVAL; if (atkbd->extra != value) { /* * Since device's properties will change we need to * unregister old device. But allocate and register * new one first to make sure we have it. */ old_dev = atkbd->dev; old_extra = atkbd->extra; old_set = atkbd->set; new_dev = input_allocate_device(); if (!new_dev) return -ENOMEM; atkbd->dev = new_dev; atkbd->set = atkbd_select_set(atkbd, atkbd->set, value); atkbd_reset_state(atkbd); atkbd_activate(atkbd); atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); err = input_register_device(atkbd->dev); if (err) { input_free_device(new_dev); atkbd->dev = old_dev; atkbd->set = atkbd_select_set(atkbd, old_set, old_extra); atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); return err; } input_unregister_device(old_dev); } return count; } static ssize_t atkbd_show_force_release(struct atkbd *atkbd, char *buf) { size_t len = scnprintf(buf, PAGE_SIZE - 1, "%*pbl", ATKBD_KEYMAP_SIZE, atkbd->force_release_mask); buf[len++] = '\n'; buf[len] = '\0'; return len; } static ssize_t atkbd_set_force_release(struct atkbd *atkbd, const char *buf, size_t count) { /* 64 bytes on stack should be acceptable */ DECLARE_BITMAP(new_mask, ATKBD_KEYMAP_SIZE); int err; err = bitmap_parselist(buf, new_mask, ATKBD_KEYMAP_SIZE); if (err) return err; memcpy(atkbd->force_release_mask, new_mask, sizeof(atkbd->force_release_mask)); return count; } static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf) { return sprintf(buf, "%d\n", atkbd->scroll ? 1 : 0); } static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; unsigned int value; int err; bool old_scroll; err = kstrtouint(buf, 10, &value); if (err) return err; if (value > 1) return -EINVAL; if (atkbd->scroll != value) { old_dev = atkbd->dev; old_scroll = atkbd->scroll; new_dev = input_allocate_device(); if (!new_dev) return -ENOMEM; atkbd->dev = new_dev; atkbd->scroll = value; atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); err = input_register_device(atkbd->dev); if (err) { input_free_device(new_dev); atkbd->scroll = old_scroll; atkbd->dev = old_dev; atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); return err; } input_unregister_device(old_dev); } return count; } static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf) { return sprintf(buf, "%d\n", atkbd->set); } static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; unsigned int value; int err; u8 old_set; bool old_extra; if (!atkbd->write) return -EIO; err = kstrtouint(buf, 10, &value); if (err) return err; if (value != 2 && value != 3) return -EINVAL; if (atkbd->set != value) { old_dev = atkbd->dev; old_extra = atkbd->extra; old_set = atkbd->set; new_dev = input_allocate_device(); if (!new_dev) return -ENOMEM; atkbd->dev = new_dev; atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra); atkbd_reset_state(atkbd); atkbd_activate(atkbd); atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); err = input_register_device(atkbd->dev); if (err) { input_free_device(new_dev); atkbd->dev = old_dev; atkbd->set = atkbd_select_set(atkbd, old_set, old_extra); atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); return err; } input_unregister_device(old_dev); } return count; } static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf) { return sprintf(buf, "%d\n", atkbd->softrepeat ? 1 : 0); } static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; unsigned int value; int err; bool old_softrepeat, old_softraw; if (!atkbd->write) return -EIO; err = kstrtouint(buf, 10, &value); if (err) return err; if (value > 1) return -EINVAL; if (atkbd->softrepeat != value) { old_dev = atkbd->dev; old_softrepeat = atkbd->softrepeat; old_softraw = atkbd->softraw; new_dev = input_allocate_device(); if (!new_dev) return -ENOMEM; atkbd->dev = new_dev; atkbd->softrepeat = value; if (atkbd->softrepeat) atkbd->softraw = true; atkbd_set_device_attrs(atkbd); err = input_register_device(atkbd->dev); if (err) { input_free_device(new_dev); atkbd->dev = old_dev; atkbd->softrepeat = old_softrepeat; atkbd->softraw = old_softraw; atkbd_set_device_attrs(atkbd); return err; } input_unregister_device(old_dev); } return count; } static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf) { return sprintf(buf, "%d\n", atkbd->softraw ? 1 : 0); } static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count) { struct input_dev *old_dev, *new_dev; unsigned int value; int err; bool old_softraw; err = kstrtouint(buf, 10, &value); if (err) return err; if (value > 1) return -EINVAL; if (atkbd->softraw != value) { old_dev = atkbd->dev; old_softraw = atkbd->softraw; new_dev = input_allocate_device(); if (!new_dev) return -ENOMEM; atkbd->dev = new_dev; atkbd->softraw = value; atkbd_set_device_attrs(atkbd); err = input_register_device(atkbd->dev); if (err) { input_free_device(new_dev); atkbd->dev = old_dev; atkbd->softraw = old_softraw; atkbd_set_device_attrs(atkbd); return err; } input_unregister_device(old_dev); } return count; } static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf) { return sprintf(buf, "%lu\n", atkbd->err_count); } static int __init atkbd_setup_forced_release(const struct dmi_system_id *id) { atkbd_platform_fixup = atkbd_apply_forced_release_keylist; atkbd_platform_fixup_data = id->driver_data; return 1; } static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id) { atkbd_platform_scancode_fixup = id->driver_data; return 1; } static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id) { atkbd_skip_deactivate = true; return 1; } /* * NOTE: do not add any more "force release" quirks to this table. The * task of adjusting list of keys that should be "released" automatically * by the driver is now delegated to userspace tools, such as udev, so * submit such quirks there. */ static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_dell_laptop_forced_release_keys, }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_dell_laptop_forced_release_keys, }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"), }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_hp_forced_release_keys, }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"), }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_volume_forced_release_keys, }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"), }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_volume_forced_release_keys, }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"), }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_volume_forced_release_keys, }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"), }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_volume_forced_release_keys, }, { /* Inventec Symphony */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_volume_forced_release_keys, }, { /* Samsung NC10 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "NC10"), }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_samsung_forced_release_keys, }, { /* Samsung NC20 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "NC20"), }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_samsung_forced_release_keys, }, { /* Samsung SQ45S70S */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_samsung_forced_release_keys, }, { /* Fujitsu Amilo PA 1510 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"), }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_volume_forced_release_keys, }, { /* Fujitsu Amilo Pi 3525 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"), }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_amilo_pi3525_forced_release_keys, }, { /* Fujitsu Amilo Xi 3650 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"), }, .callback = atkbd_setup_forced_release, .driver_data = atkbd_amilo_xi3650_forced_release_keys, }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"), DMI_MATCH(DMI_PRODUCT_NAME, "TA12"), }, .callback = atkbd_setup_forced_release, .driver_data = atkdb_soltech_ta12_forced_release_keys, }, { /* OQO Model 01+ */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "OQO"), DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"), }, .callback = atkbd_setup_scancode_fixup, .driver_data = atkbd_oqo_01plus_scancode_fixup, }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), }, .callback = atkbd_deactivate_fixup, }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HONOR"), DMI_MATCH(DMI_PRODUCT_NAME, "BCC-N"), }, .callback = atkbd_deactivate_fixup, }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HONOR"), DMI_MATCH(DMI_PRODUCT_NAME, "FMB-P"), }, .callback = atkbd_deactivate_fixup, }, { /* HONOR MagicBook Pro 14 2026 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HONOR"), DMI_MATCH(DMI_PRODUCT_NAME, "ZQC-P"), }, .callback = atkbd_deactivate_fixup, }, { /* Lenovo Yoga Air 14 (83QK) */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), DMI_MATCH(DMI_PRODUCT_NAME, "83QK"), }, .callback = atkbd_deactivate_fixup, }, { /* Xiaomi Book Pro 14 (TM2424) */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "XIAOMI"), DMI_MATCH(DMI_PRODUCT_NAME, "Xiaomi Book Pro 14"), }, .callback = atkbd_deactivate_fixup, }, { } }; static int __init atkbd_init(void) { dmi_check_system(atkbd_dmi_quirk_table); return serio_register_driver(&atkbd_drv); } static void __exit atkbd_exit(void) { serio_unregister_driver(&atkbd_drv); } module_init(atkbd_init); module_exit(atkbd_exit);