| Age | Commit message (Collapse) | Author |
|---|
|
Since I've added various features in the arm architecture
support and review most of the patches nowadays, add myself
as a co-maintainer
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Our official domain is now u-boot-project.org, so update all in-tree
references to use the correct domain.
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Adding myself to continue Bin's work to help maintain the
NVMe support in U-boot.
Acked-by: Tom Rini <trini@konsulko.com>
Link: https://patch.msgid.link/20260519-u-boot-pci-nvme-maintainer-v1-1-363593cbbfdc@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The main use case for u-boot on Apple silicon based devices is to
provide an EFI based bootloader for operating systems. This uses a
generic u-boot image with DTBs passed from an earlier boot loader
(m1n1). Use the generic board name "mac" for this purpose.
Signed-off-by: Janne Grunau <j@jannau.net>
|
|
I'm one of the co-maintainers of Apple silicon support in the Linux
kernel and have contributed to u-boot's Apple SoC support.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Mark Kettenis <kettenis@openbsd.org>
|
|
The files weren't added to MAINTAINERS but clearly belong to Apple
silicon (M1) support.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Mark Kettenis <kettenis@openbsd.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-snapdragon
Various Qualcomm additions this cycle:
* USB superspeed support for 1 platform
* Initial support for the Milos platform and the Fairphone Gen 6
(chainloaded from ABL)
* Improved support for booting with OP-TEE on supported platforms
* Initial basic power domain support
Notably there is a generic change to the device core, missing power
domains will no longer cause a device to fail probe and instead will
just print a warning. This shouldn't affect any existing platforms.
|
|
Add the file pattern for Qualcomm PHY drivers to the MAINTAINERS file.
Signed-off-by: Balaji Selvanathan <balaji.selvanathan@oss.qualcomm.com>
Reviewed-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251203110735.1959862-7-balaji.selvanathan@oss.qualcomm.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
|
|
Replace old bouncing emails with ehristev@kernel.org
Signed-off-by: Eugen Hristev <ehristev@kernel.org>
|
|
Add support for the DesignWare-based PCIe host controller found in
AMD Versal2 SoCs. This enables PCIe functionality (e.g. NVMe storage)
on boards such as the VEK385.
The driver builds on the existing pcie_dw_common infrastructure and
adds Versal2-specific handling: it maps the SLCR register region to
mask and clear TLP interrupt status bits, parses dbi/config/atu/slcr
register regions from device tree, and supports an optional PERST#
GPIO on child nodes for endpoint reset sequencing. The outbound iATU
is programmed for the non-prefetchable memory window from device tree
ranges.
Signed-off-by: Pranav Sanwal <pranav.sanwal@amd.com>
Link: https://lore.kernel.org/r/20260327121015.996806-2-pranav.sanwal@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
Soon I will no longer be working at SECO. Update the mailmap to redirect
to my linux.dev address which I still have access to.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
|
|
Define CONFIG_SYS_SOC in the mach-sc5xx Kconfig. Follow the standard
U-Boot include path convention by moving the SC5xx SoC headers from
arch/arm/include/asm/arch-adi/sc5xx/ to the conventional
arch/arm/include/asm/arch-sc5xx/ location. Update includes from
<asm/arch-adi/sc5xx/*.h> to <asm/arch/*.h> across mach-sc5xx and board
files.
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
|
|
|
|
- change TQ GROUP to TQ-Systems
- add TQ mailing list
- remove custodian tree
- add board directory
- add board configs
- add board device trees
- add board documentation directory
- add shared environment directory
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
|
|
Richard Genoud <richard.genoud@bootlin.com> says:
SquashFS has support in U-Boot, but not in SPL.
This series adds the possibility for the SPL to load files from SquashFS
partitions.
This is useful, for instance, when there's a SquashFS rootfs containing
U-Boot binary.
NB: falcon mode is not supported yet.
Link: https://lore.kernel.org/r/20260313104229.1555236-1-richard.genoud@bootlin.com
|
|
I propose myself to maintain the squashfs files with João.
Also, reorder patterns in alphabetical order.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: João Marcos Costa <joaomarcos.costa@bootlin.com>
|
|
João is using his Bootlin address now.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: João Marcos Costa <joaomarcos.costa@bootlin.com>
|
|
Add a new fwumdata tool to allows users to read, display, and modify FWU
(Firmware Update) metadata from Linux userspace. It provides functionality
similar to fw_printenv/fw_setenv but for FWU metadata. Users can view
metadata, change active/previous bank indices, modify bank states, and set
image acceptance flags. Configuration is done via fwumdata.config file.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Update FWU metadata-related tools by moving mkfwumdata.c into a new
tools/fwumdata_src/ directory structure. This refactoring prepares for the
addition of the fwumdata runtime tool, which will allow editing FWU
metadata directly from the target.
The Kconfig and Makefile entries are also moved into separate files within
the new directory (Kconfig and fwumdata.mk respectively) to keep all FWU
metadata tool configurations together and improve maintainability.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
Add new MediaTek custodians and the new MediaTek custodian's git
repository to the MAINTAINERS file.
Julien and I have volunteered to act as custodians for MediaTek since
we have been actively working on upstreaming MediaTek support for some
some time now.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260311-mtk-custodians-v1-1-000f9025b54c@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
|
|
Quentin Schulz <foss+uboot@0leil.net> says:
The entry is named LED while it only matches PWM LED binding and driver,
so rename it to PWM LED.
Ivan's email is bouncing, so mark the PWM LED entry as orphaned.
Link: https://lore.kernel.org/r/20260303-pwm-led-orphan-v1-0-54d14a430cb7@cherry.de
|
|
Ivan's mail is bouncing, so update the entry status.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
It clearly only lists PWM LED driver and bindings so we should have the
entry reflect that.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
Add new driver to support NXP XSPI controller for NOR and NAND flash.
XSPI controller also uses a programmable sequence engine to provide
flexibility to support existing and future memory devices. It supports
single, dual, quad, octal modes of operation.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-ufs into next
- ufs_hba_ops callbacks cleanup
- Rockchip UFS reset support
- UFS support in SPL
|
|
Add minimal infrastructure to build SPL images with support for UFS
storage devices. This also pulls in SCSI support and charset functions,
which are dependencies of the UFS code.
With this, only a fixed offset is supported for loading the next image,
which should be specified in CONFIG_SPL_UFS_RAW_U_BOOT_SECTOR as the
number of 4096-byte sectors into the UFS block device.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://patch.msgid.link/20260120-rk3576-ufs-v5-1-0edb61b301b7@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Prepare v2026.04-rc4
|
|
Tudor Ambarus will step down as SPI NOR reviewer.
I would like to take this role.
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
|
|
After years of developing the ADI ADSP platform, Timesys was purchased
by another company and is no longer contracted to maintain the platform.
Utsav is leaving ADI after contributing to ADSP SoCs for the last 3
years. He is a founding member of the in-house team supporting the
chips.
Linux support at ADI has been consolidated. Use the company-wide mailing
list and git repository.
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
Reviewed-by: Greg Malysa <malysagreg@gmail.com>
|
|
Add support for the PMIC wrapper (pwrap) IP block found on MediaTek
MT8365 and similar SoCs.
On these SoCs the PMIC is connected via SPI. The SPI controller is not
directly visible to the CPU, but only through the PMIC wrapper inside
the SoC.
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Co-developed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Add a driver for the power regulators of the MediaTek MT6357 PMIC chip.
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
It has been a long while since Jagan Teki, Joe Hershberger or Ramon
Fried have been active in the community. We thank them for their time
over the years. Remove them from the active maintainer list and mark a
few things as Orphaned for now.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Add entry for SMBIOS in MAINTAINERS and assign myself as maintainer.
Signed-off-by: Raymond Mao <raymond.mao@riscstar.com>
|
|
I will be using my Arm email address for all contributions. Update
MAINTAINERS and .mailmap accordingly.
Signed-off-by: Jerome Forissier <jerome.forissier@arm.com>
|
|
My Linaro email address is no longer valid. Update entries in the
MAINTAINERS file, and add a mapping in the mailmap file.
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
|
|
Kuan-Wei Chiu <visitorckw@gmail.com> says:
Add support for the QEMU 'virt' machine on the m68k architecture. The
QEMU virt machine models a generic system utilizing Goldfish virtual
peripherals and is capable of emulating various classic 68k CPUs.
Currently, U-Boot's m68k architecture support focuses on ColdFire
variants. This series expands support to include the classic M680x0
architecture, implementing the necessary exception vectors, startup
code, and a bootinfo parser compatible with the QEMU interface.
Drivers for Goldfish peripherals (TTY, Timer, RTC) and the QEMU
Virtual System Controller (sysreset) are also added to enable serial
console, timekeeping, and system reset functionality.
The implementation has been verified on QEMU targeting the M68040 CPU,
confirming successful hardware initialization and boot to the U-Boot
command shell. Additionally, the CI configuration was verified locally
using gitlab-ci-local "qemu_m68k_virt test.py", resulting in
PASS qemu_m68k_virt test.py.
Link: https://lore.kernel.org/r/20260107201838.3448806-1-visitorckw@gmail.com
[trini: Re-sort MAINTAINERS entries]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Rename the "COLDFIRE" entry to "M68K" to reflect that the architecture
support now encompasses traditional m680x0 CPUs (e.g., M68040) in
addition to ColdFire platforms.
Remove Huan Wang from the maintainers list as she is no longer active,
as suggested by Angelo Dureghello.
Add myself as a co-maintainer to assist with reviewing and testing
m68k-related patches.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Angelo Dureghello <angelo@kernel-space.org>
|
|
Add support for the Motorola 68040 architecture. Currently, m68k
support in U-Boot is primarily focused on ColdFire variants. Introduce
the necessary infrastructure to support the classic M680x0 series,
specifically targeting the M68040 as emulated by QEMU.
The implementation includes exception vectors, early startup code, and
minimal CPU initialization and relocation stubs. It also defines the
standard m68k boot information structure used for passing hardware
information to the operating system. To ensure compatibility, ColdFire-
specific library objects such as cache and interrupt handling are
excluded from the build when M68040 is selected.
Additionally, apply a specific workaround during the early memory
reservation stage. Use a manual loop to clear global data instead of
the standard memset() function, as utilizing memset() at this point was
observed to cause a hang on the QEMU platform.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Angelo Dureghello <angelo@kernel-space.org>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
|
|
Introduce a new sysreset driver for the QEMU Virtual System Controller.
This device is found on QEMU "virt" machines (such as the m68k virt
target) and provides a mechanism to trigger system reset and power-off
events.
The driver maps U-Boot sysreset types to the corresponding controller
commands:
- SYSRESET_WARM / SYSRESET_COLD -> VIRT_CTRL_CMD_RESET
- SYSRESET_POWER_OFF -> VIRT_CTRL_CMD_HALT
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
|
|
Add support for the Goldfish timer driver. This driver utilizes the
Goldfish RTC hardware to provide a nanosecond-resolution timer. This
virtual device is commonly found in QEMU virtual machines (such as the
m68k virt machine) and Android emulators.
The driver implements the standard U-Boot timer UCLASS interface,
exposing a 64-bit monotonically increasing counter with a 1GHz clock
rate derived from the RTC registers.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Yao Zi <me@ziyao.cc>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Angelo Dureghello <angelo@kernel-space.org>
|
|
Add support for the Google Goldfish TTY serial device. This virtual
device is commonly used in QEMU virtual machines (such as the m68k
virt machine) and Android emulators.
The driver implements basic console output and input polling using the
Goldfish MMIO interface.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Yao Zi <me@ziyao.cc>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Acked-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Acked-by: Angelo Dureghello <angelo@kernel-space.org>
|
|
This patch renames the board directory from board/freescale to
board/nxp because NXP now provides Board Support Packages (BSPs) and
tools for the former Freescale i.MX and other i.MX products.
All relevant references have been updated accordingly. This change does
not affect functionality.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
|
Greg Malysa <malysagreg@gmail.com> says:
This series adds the final pieces to enable mainline U-Boot to build and
boot all Analog Devices SC5xx SoCs and supports the associated carrier
board options. At this point it should be viable for new users for these
platforms to start with the latest version of U-Boot rather than our
vendor fork, however some features (such as OSPI support and falcon
boot) remain unavailable until we are able to unify our implementations
with the mainline implementations.
Link: https://lore.kernel.org/r/20251211080414.5363-1-malysagreg@gmail.com
[trini: Rebuild CI containers to have new tools]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This adds missing maintainers entries for the ADI SC5xx defconfigs and
for a device tree binding file that was previously missed.
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
|
|
Julien Stephan <jstephan@baylibre.com> says:
The MediaTek MT8188 is a ARM64-based SoC with a dual-core Cortex-A78
cluster and a six-core Cortex-A55 cluster. It includes UART, SPI,
USB3.0 dual role, SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and
several LPDDR3 and LPDDR4 options.
This series adds basic support for MT8188.
Link: https://lore.kernel.org/r/20251209-add-mt8188-support-v2-0-31dbfcf7303c@baylibre.com
|
|
This adds basic support for MediaTek MT8188 SoC.
Add watchdog support by adding upstream compatible string.
Add tphy support by adding "mediatek,generic-tphy-v2" compatible string
in arch/arm/dts/mt8188-u-boot.dtsi
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
|
|
|
|
My linaro.org email isn't valid anymore. Use my personal email instead.
Signed-off-by: Jerome Forissier <jerome@forissier.org>
|
|
Add support for creating an Amlogic Boot Image that pass CHK in BL1 on
Amlogic AArch64 SoCs.
Images can optionally be signed for secure boot scenario, however
creation of signed images has not been implemented.
Example of how to use it:
# Create an amlogic boot image
tools/mkimage -T amlimage -n gxbb -d u-boot-spl.bin u-boot-amlogic.bin
# List boot image header information
tools/mkimage -l u-boot-amlogic.bin
# Extract amlogic boot image payload
tools/dumpimage -T amlimage -o bl2-payload.bin u-boot-amlogic.bin
Or with binman using something like:
binman {
u-boot-amlogic {
filename = "u-boot-amlogic.bin";
pad-byte = <0xff>;
mkimage {
filename = "bl2.bin";
args = "-n", "gxbb", "-T", "amlimage";
u-boot-spl {
};
};
};
};
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
[Ferass: check digest type in _print_header, version in _verify_image]
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Link: https://patch.msgid.link/20251126-spl-gx-v5-1-6cbffb2451ca@postmarketos.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Prepare v2026.01-rc4
|
