| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux.git
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
|
|
serial-rs485.rst asks include/uapi/linux/serial.h for both struct
serial_rs485 and uart_get_rs485_mode(). The function and its kernel-doc
comment live in drivers/tty/serial/serial_core.c, so the directive has
never rendered it and the section shows only the structure.
Add a second directive for serial_core.c.
Fixes: 0f4648a1a6d3 ("Documentation: rs485: Mention uart_get_rs485_mode()")
Assisted-by: LLM
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260905083648.39026-1-kmehltretter@gmail.com>
|
|
directive
reset.rst asks drivers/reset/core.c for of_reset_simple_xlate(). Commit
9035073d0ef1 ("reset: convert reset core to using firmware nodes")
replaced it with fwnode_reset_simple_xlate(). Since then the directive
finds nothing for it and the default translation helper is missing from
the rendered controller API section.
Use the current name.
Fixes: 9035073d0ef1 ("reset: convert reset core to using firmware nodes")
Assisted-by: LLM
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260905085211.40286-1-kmehltretter@gmail.com>
|
|
Balance parentheses.
Signed-off-by: Manuel Ebner <manuelebnerli@mailbox.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260903155345.733244-2-manuelebnerli@mailbox.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
SPI NOR has a lot of history. Additions over additions, the subtleties
of the JESD216 specification, their implementations by the manufacturers
and the hardware mistakes have generated a gigantic maze, let's try to
understand what is really needed.
The specification explains the QE (Quad Enable) bitfield as describing
where the bit to enable the Quad capability is, but also how to set
it. Unfortunately, the specification is not precise about what opcodes
are supported exactly in all the cases. There is an introduction that
basically states:
- Opcode 0x05 reads SR1
- Opcode 0x35 reads SR2
- Opcode 0x01 writes SR1, and then SR2 if another byte is written
Then the bitfield, among indicating the location of the QE bit, may
indicate:
- Reading SR1 and SR2 in one operation is not possible (loops over the
content of SR1)
- Reading SR2 directly is possible
- Only writing SR1 zeroes SR2.
One problem with the current implementation, is that it only focuses on
the QE bit. A quad_enable function was created for each case, even
though in practice, the logic was always the same: read, modify, write,
read back and verify. One problem comes when other features need to play
with the status registers, like software block protection or OTP: you
never know how to properly handle the QE bit, nor where it is, nor how
to read/write the Status registers. This lead to
approximations/guessing (in swp.c, otp.c and obviously in legacy
controller drivers like atmel.c) but also to the implementation of a
gazillon of helpers for reading/writing/checking the status registers.
In addition, I believe some design decisions had a negative impact over
the years.
- All possible situations had to be flagged by the core. This is likely
wrong, because we no longer know why we need specific quirks. It was
ineherent to the state of the SPI NOR core before the great cleanup
that had happened the past few years. I believe this creates confusion
in the core today, and we should push this to vendor fixups
instead. As an example, in 2023 Hsin-Yi was facing an issue because
his chip was setting the wrong QER value, leading to RDCR being
prevented, thus falling into a condition blindly setting a random QE
bit (I strongy believe it is done like that for wrong reasons). His
chip actually had RDCR support! The correct fix should have been to
mark the capability in a device fixup instead of handling this in the
core.
Link: https://lore.kernel.org/lkml/CAJMQK-hR0eaO0b4Vd0U8_KAndLyZapqdHjVLAoe42rWi9rdLkA@mail.gmail.com/
- SFDP parsing is over cautious. I believe
BFPT_DWORD15_QER_SR2_BIT1_NO_RD is abusive (nothing states that RDCR is
not supported), and BFPT_DWORD15_QER_SR2_BIT1 is also out of
specification when forcing 16-bit Status writes.
- SNOR_F_HAS_16BIT_SR is only imposing 16bit Status writes, whereas
reads can still be 8-bit wide.
- The usage of helpers verifying the writes was also spread for IMHO no
really good reason. Why shouldn't we trust spi operations when it
comes to Status Registers? We do not read back our page reads, so why
status registers should be treated with so much care, if it's not
because we are unsure of what is being done? My proposal includes a
check when it comes to the QE bit (done once) but we don't need these
checks otherwise. If the QE bit was written properly, there are high
chances that the other register accesses will just be fine, no?
Asde from my main quest, I also observed no good reason to ask the
read/write status register callers to use nor->bouncebuf while the
low-level helpers could do it themselves (we are talking about one or
two bytes being copied).
So after these observations, my proposal is the following:
- Create private low level helpers that just read or write a status
register. They are flexible, we can give the opcode (which varies
based on the SFDP QER field) and the length (1 or 2).
- Create public generic accessors which will be used to read/write sr1
and/or sr2. This is where all the cleverness shall be. The helpers use
the available opcodes for a given chip in order to fullfill the
request.
- Provide a single generic ->quad_enable() hook which generically does
all the steps mentioned above (read, modify, write, read back and
verify).
- Create a list of opcodes for all 6 possible situations:
{read, write} {sr1, sr2, sr1 and sr2}. These opcodes are
filled/cleared based on the QER field. An opcode set to 0 indicates
the absence of support (there is no 0x00 opcode in SPI NOR).
I tried my best to analyze the current behavior and to mimic it as much
as possible, but this is a risky cleanup. However, if we go for this, it
will be *much* easier in the future to handle all kind of chip
variations. We won't be limited to a couple of flags anymore, but rather
we'll be able to just disable a read or write capability using a single
line.
Known deviations:
- The Atmel manufacturer driver drives non SFDP chips which by default
were receiving the HAS_16B_WR flag, forcing SR2 writes all the times,
but it was deliberately making single bytes writes to SR1 for its
locking operations. The flag is likely wrong for them, so I removed
it.
- I am proposing on purpose a single quad_enable helper. It should match
all the cases, with 1 identified difference which I believe is
harmless: in the SR2_BIT7 case, the helper would make an extra SR1
read/write which was not done before. This entry explicitly supports
reading and writing the two registers. Note: no manufacturer has been
identified to actually use that entry yet.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
|
|
Remove needless '(' and fix comma splice.
Signed-off-by: Manuel Ebner <manuelebnerli@mailbox.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260904122005.760299-2-manuelebnerli@mailbox.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Remove needless '(' from equation.
Signed-off-by: Manuel Ebner <manuelebnerli@mailbox.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject adjustments ]
Link: https://patch.msgid.link/20260903160751.734704-2-manuelebnerli@mailbox.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add '}' and fix indentation.
Signed-off-by: Manuel Ebner <manuelebnerli@mailbox.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260903095445.729419-2-manuelebnerli@mailbox.org
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add missing ')' to sentence.
Signed-off-by: Manuel Ebner <manuelebnerli@mailbox.org>
Link: https://patch.msgid.link/20260903095545.729607-3-manuelebnerli@mailbox.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI support updates from Rafael Wysocki:
"These update documentation to reflect recent changes in the upstream
ACPICA project, fix issues in the core ACPI device enumeration code
(one of which has been introduced recently), improve the primary
"physical" device lookup for ACPI device objects in that code, and
update ACPI device drivers:
- Update MAINTAINERS, CREDITS and ACPI subsystem documentation to
reflect recent changes in the upstream ACPICA project (Rafael
Wysocki)
- Prevent the core ACPI enumeration code from combining device
resources that overlap completely in order to avoid resource
conflicts during platform device registration because there are
drivers that expect such resources to be present (Rafael Wysocki)
- Defer device power initialization during ACPI-based device
enumeration to the point when the given device is known to be
present and functional and all of its dependencies have been met
(Peixin Xie)
- Fix bus ID cleanup on device_add() failures during ACPI device
object registration (Hongyan Xu)
- Introduce a new helper function for looking up the primary
"physical" device for a given ACPI device object and update the
core ACPI device enumeration code to use that function (Rafael
Wysocki)
- Protect all battery properties with a separated mutex in the ACPI
battery driver to prevent race conditions from occurring and avoid
evaluating the _BST ACPI control method multiple times in parallel
for the same battery device (Rong Zhang)
- Add DMI quirk for the Razer Blade Pro 17 early 2020 lid switch to
the ACPI button driver (Robin Everaars)
- Convert fixed clock rates in the ACPI driver for AMD SoCs (APD) to
use HZ_PER_MHZ and add a clock frequency for the HJMC01 I2C
controller to it (Hongnan Li and Xiangyang Yu)
- Fix a stack buffer overflow in query_capability() in the ACPI
platform firmware runtime update driver (Anirudh Prasad)"
* tag 'acpi-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: button: Add DMI quirk for Razer Blade Pro 17 early 2020 lid switch
ACPI: scan: Do not combine resources that overlap completely
ACPI: Update upstream ACPICA repository URL in documentation
ACPI: Update MAINTAINERS entry for ACPICA
ACPI: Add Bob Moore to CREDITS
ACPI: pfr_update: fix stack buffer overflow in query_capability()
ACPI: scan: Defer device power initialization
ACPI: APD: Add clock frequency for HJMC01 I2C controller
ACPI: APD: Convert fixed clock rates to use HZ_PER_MHZ
ACPI: scan: Use acpi_bus_get_primary_device()
ACPI: platform: Use acpi_bus_get_primary_device()
ACPI: bus: Introduce acpi_bus_get_primary_device()
ACPI: scan: fix bus ID cleanup on device_add() failures
ACPI: battery: Protect all properties with a separated mutex
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mostly the usual clk driver updates and new SoC additions plus
non-critical data fixes for things that weren't used yet.
One thing that's new here in the core is SSC spread spectrum support
(SSC) in the clk provider API. The idea is that DT authors will
configure SSC for certain clks and they'll be configured at clk
provider registration time or when a consumer device is probed,
similar to how we handle assigned clk rates or parents.
On the clk driver side we have Qualcomm adding almost half the diff
because they add support for 4 different SoCs and then a long tail of
other SoCs like Mediatek, Renesas, Rockchip, SpaceMiT, etc. add more
SoC support this time around. Luckily it's mostly clk data for these
new SoCs because the actual clk_ops are already there. Beyond the new
drivers we get all the little fixups for more compilation coverage or
usage of more modern APIs. That all looks normal.
Finally, I kinda buried the lede, I'm bringing on Brian and Jerome to
help out with maintaining the clk subsystem. The current working model
is already semi-distributed in that silicon vendors typically take
care of their drivers and send me pull requests but I'm becoming a
bottleneck for new drivers and core framework review because this has
become a 100% volunteer effort on my part.
Mike is stepping down after all these years (thanks Mike!) and that
jump started the conversation around finding co-maintainers. Brian and
Jerome have graciously offered to help me with the work load, meaning
in the future they'll be sending pull requests and committing directly
to the clk.git tree. They've both been around on the list for a while,
I've met them both in person, and they've been making changes to the
core clk framework along with helping review patches so I'm pretty
confident this will work well.
Core:
- devm_clk_bulk_get_enable() consumer API
- devm_clk_hw_register_composite_pdata() provider API
- Spread Spectrum Clock (SSC) support via DT bindings and provider APIs
- Divider clk rounding improved (and tested)
New Drivers:
- Cix Sky1 audio subsystem (AUDSS)
- UltraRISC DP1000
- MediaTek MT8173 MFG_TOP
- Si549
- Aspeed AST2700 PECI
- Airoha EN7523 PCIe
- Rockchip RV1106
- Mobileye EyeQ7H
- Qualcomm Maili GCC, TCSR, RPMh, and video clks
- Qualcomm Shikra GCC, RPM, GPU, display, and audio clks
- Qualcomm Nord display and graphics clks
- Qualcomm Glymur camera and EVA clks
- Qualcomm Hawi video clks
- Amlogic A9 AO and peripheral clks
- Renesas R-Car X5H (R8A78000) CPG"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (269 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is fully initialized
clk: ti: Make sure clk_init_data is fully initialized
MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
Drop Michael Turquette's clk maintainer entry
clk: ti: composite: resolve parent clocks by DT index, not by name
clk: ti: mux: resolve parent clocks by DT index, not by name
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
dt-bindings: clock: ti,keystone-gate: Convert to DT schema
dt-bindings: clock: ti: Convert APLL clock to DT schema
clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
dt-bindings: clock: ti,clockdomain: Convert to DT schema
dt-bindings: clock: Correct white-space style
clk: samsung: Don't include <linux/mod_devicetable.h>
clk: at91: Read "reg" with helper
clk: renesas: Add R-Car X5H CPG driver
clk: rockchip: rk3576: fix source muxes for SPI0..SPI4
clk: rockchip: Add clock controller for the RV1106
dt-bindings: clock: rockchip: Add RV1106 CRU support
dt-bindings: clock: Document Renesas R-Car X5H Clock Pulse Generator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull another power sequencing update from Bartosz Golaszewski:
"A single tree-wide rename of two of the public functions to better
reflect their actual semantics:
- rename pwrseq_power_on/off() to pwrseq_enable/disable() tree-wide"
* tag 'pwrseq-updates-for-v7.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: rename pwrseq_power_on/off() to pwrseq_enable/disable()
|
|
The way power sequencing works means that a call to pwrseq_power_on()
does not necessarily result in the pwrseq target being powered-on at
that time: it may have already been powered on before. Similarly: a call
to pwrseq_power_off() does not have to result in an actual powering off
of resources: there may still be other users that requested a power-on
before.
We will also introduce the concept of "non-controllable" pwrseq targets
soon which further increases the disconnect between the naming
convention and the actual semantics.
What consumers of pwrseq descriptors actually do is: they *vote* for a
powering on of a given target or retract that vote. These operations
could be called get/put in line with runtime PM but this could become
confusing since we already provide pwrseq_get/put() for a different
purpose. pwrseq_vote_on/off() also have been rejected as unusual in
the tree.
Change the name of the two functions to pwrseq_enable/disable() which
better reflects their purpose and semantics and also mirrors other
enable-counted resources like regulators and clocks. No functional change
intended.
If at any point users need to know *when* the exact power event happens,
we can provide that information in the form of a notifier.
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Acked-by: Alessio Belle <alessio.belle@imgtec.com> # imagination
Link: https://patch.msgid.link/20260731-pwrseq-vote-rename-v3-1-44e60b8be053@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- New API to combine configuration and preparation and users
New hardware support:
- Mediatek MT8189 SoC uart dma support
Updates:
- Designware dma driver flatten desc structures and simplify code,
interrupt-path groundwork changes, first part of PCI EP DMA support
- Updates to zynqmp_dma with runtime PM and device removal
improvments
- Xilinx dma optimizations for AXIDMA and MCDMA channel management"
* tag 'dmaengine-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (73 commits)
dmaengine: dw-edma: Mark emulated IRQ as level-triggered
dmaengine: idxd: assign all engines to group 0 in IAA defaults
dmaengine: qcom_hidma: remove conditional return with no effect
dmaengine: qcom-bam-dma: fix autosuspend cleanup during removal
dmaengine: fsl-edma: tracing: no ptr dereference during log output
dmaengine: dw-edma: Program endpoint function numbers
dmaengine: dw-edma-pcie: Add chip flags to match data
dmaengine: dw-edma-pcie: Handle optional data blocks
dmaengine: dw-edma-pcie: Factor out descriptor block address lookup
dmaengine: dw-edma-pcie: Add register offset match flag
dmaengine: dw-edma-pcie: Add platform ops to match data
dmaengine: dw-edma-pcie: Rename vsec_data to dma_data
dmaengine: dw-edma-pcie: Add capability match data
dmaengine: dw-edma-pcie: Track non-LL mode in DMA data
dmaengine: dw-edma: Add partial channel ownership mode
dmaengine: dw-edma: Initialize IRQ data before requesting IRQs
dmaengine: dw-edma: Add core quiesce operations
dmaengine: dw-edma: Add per-channel interrupt routing control
dmaengine: dw-edma: Factor out HDMA interrupt setup helper
dmaengine: dw-edma: Defer channel IRQ handling to workqueue
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Use the non-blocking mux_state_try_select() in the generic MUX pin
control back-end
- Free pin maps on pinctrl_generic_to_map() failure in the core
helpers
New hardware pin control:
- Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
(this is for the low power audio, LPASS = Low Power Audio SubSystem
portions)
- Upboard support on top of the Intel pin controller
- Apple T6030 and T6031 support (just compatible strings)
- Samsung Exynos 8855 SoC
- Mediatek MT6858 SoC
- Rockchip RK3308B and RV1106 SoCs
- Airoha EN7523 and AN7563 SoCs
Improvements:
- Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable
- Qualcomm improvements on top of the Qualcomm PDC (power domain
controller) irqchip improvements from tglx:s tree
- Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups
- The NPCM8xx driver has been put into shape fixing many pin and
group definitions
- Some non-urgent Tegra 264 pin assignments are fixed up
- Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
pin assignments, missing features etc"
* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
pinctrl: meson: sync some modify from A4
pinctrl: meson: a4: Add input enable pin configuration
pinctrl: realtek: rtd1625: remove unused group name spdif_sel
pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
Revert "Merge branch 'ib-rsk7204' into devel"
pinctrl: rockchip: Add RV1106 pinctrl support
dt-bindings: pinctrl: rockchip: Add RV1106 compatible
pinctrl: rockchip: Decode drive strength in the get function
pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
pinctrl: airoha: add support of an7563 SoC
dt-bindings: pinctrl: airoha: add support of an7563 pin controller
pinctrl: airoha: try to find chip scu node by phandle first
pinctrl: airoha: add support of en7523 SoC
dt-bindings: pinctrl: airoha: add support of en7523 pin controller
pinctrl: airoha: an7583: add support for olt pinmux
pinctrl: airoha: an7583: add support for pon_alt pinmux
pinctrl: airoha: an7583: add support for npu_uart pinmux
dt-bindings: pinctrl: airoha: an7583: add missed features
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm: drop "sub" prefix from various places" (Dev Jain)
page->folio conversion and a naming cleanup
- "mm/kasan: remove redundant initialization for kasan_flag_write_only"
(Igor Putko)
KASAN cleanup work
- "mm/filemap: reduce unnecessary xarray lookups" (Chi Zhiling)
Small speedup in the pagecaache read code
- "mm/percpu: Fix possible NOFS/NOIO reclaim recursion" (Kaitao Cheng)
Improve the vmalloc code - mainly the avoidance of GFP_KERNEL
allocations when the caller asked for GFP_NOFS or GFP_NOIO
- "mm/kmemleak: avoid soft lockup when scanning task stacks" (Breno
Leitao)
Avoid a soft lockup watchdog trigger from the kmemleak scanning code
in extreme situations
- "mm/page_owner: misc cleanups" (Ye Liu)
Cleanups to the page_owner code. For some reason lots of people have
been working on the page_owner code this cycle.
- "mm: convert to walk_page_range_vma() to eliminate find_vma()"
(Kefeng Wang)
Simplify and accelerate the page walking library function
- "mm/migrate: preparatory cleanups for batch copy and offload"
(Shivank Garg)
Cleanups in the migration code
- "mm/page_owner: add per-fd filter infrastructure for print_mode and
NUMA filtering" (Zhen Ni)
Per-fd filtering to page_owner in order to reduce the sometimes vast
amount of output it can produce
- "mm: Refactor bootmem gigantic hugepage allocation" (Muchun Song)
Fixes and preparatory cleanups around bootmem HugeTLB handling,
sparse initialization ordering, and related vmemmap setup
- "mm/zsmalloc: reduce lock contention in zs_free()" (Wenchao Hao)
Reduce lock contention in zs_free(), which dominates the unmap path
under memory pressure on Android (LMK kills) and on x86 servers
running zswap-heavy workloads.
Up to 1.83x improvement in microbenchmarking.
- "move alloc_tag.c file under mm/" (Suren Baghdasaryan)
- "samples/damon: handle damon_{start,stop}() failures" (SJ Park)
Fix improper handling of damon_start(), damon_stop(), and
damon_call() failures across DAMON sample modules to prevent
potential memory leaks, operation disruptions and use-after-free
bugs
- "mm/damon/sysfs: kobject_del() directories that users can
create/remove" (SJ Park)
Fix delayed sysfs directory removal under DEBUG_KOBJECT_RELEASE
causeing creation failures due to duplicate directory names by adding
missing kobject_del() calls before creating new directories
- "mm: cleanup clear_not_present_full_ptes()" (David Hildenbrand)
Clean up the core pte handling code
- "selftests/damon: misc fixes for test bugs" (Kunwu Chan)
Fix several bugs in the DAMON selftests
- "selftests/damon: fix memcg_path staging handling" (Cheng Nie)
Fix a bug in _damon_sysfs.py for damos_filter memcg_path setup, and
add a test case for it in sysfs.py.
- "selftests/damon: test kdamond refresh_ms" (Ruslan Valiyev)
Selftest coverage for DAMON's refresh_ms sysfs feature by updating
the test control module and verifying that scheme stats update
automatically without manual intervention
- "mm/damon: five misc fixups" (Akinobu Mita)
Miscellaneous DAMON fixups.
- "mm/damon/core: detect internal variation above max_nr_regions/2"
(Jiayuan Chen)
Fix DAMON's region splitting behavior when region counts exceed half
the maximum budget by dynamically scaling down the split fraction as
the limit approaches, preventing large regions from staying un-split,
and add corresponding KUnit test coverage
- "mm: preparatory patches for PMD level swap entries" (Usama Arif)
Refactor and clean up PMD softleaf helpers, call sites, and
architecture flags to lay the groundwork for a follow-up series that
introduces PMD page table swap entries
- "mm/damon: update, optimize, and clean up doc, tests, and code" (SJ
Park)
Update DAMON design and ABI documentation, expands unit and selftest
coverage, optimize damon_commit_target_regions(), and clean up
recently added sysfs interface code for better readability
- "mm/vmpressure: reduce CPU, memory and code overhead on cgroup v2"
(Usama Arif)
Optimize vmpressure() by skipping unnecessary work on cgroup v2 for
userspace event notifications and refactor v1-only eventfd handling
into mm/memcontrol-v1.c to reduce memory overhead and code complexity
- "selftests/mm: refactor pkey helpers and fix mmap error handling"
(Hongfu Li)
Refactor pkeys shared tracing and assertion helpers into a common
file, unify protection key selftests to use consistent diagnostic
logging and assertions, and enforce standardized MAP_FAILED return
checks for mmap() calls across the tests
- "mm/damon: optimize out nr_accesses_bp" (SJ Park)
Replace the error-prone, continuously updated nr_accesses_bp field in
damon_region with an on-demand moving sum function, reducing
structure memory overhead and avoiding state corruption bugs
- "Open HugeTLB allocation routine for more generic use" (Ackerley Tng)
Decouple HugeTLB folio allocation from VMA dependencies by
introducing hugetlb_alloc_folio(), enabling subsystems like
guest_memfd to allocate HugeTLB folios without standard VMA
reservations or pseudo-VMAs
- "mm/damon: provide pseudo moving sum probe_hits" (SJ Park)
Integrate DAMON's probe_hits attribute counter into the pseudo moving
sum infrastructure, enabling real-time, online monitoring without
waiting for full aggregation intervals
- "mm: Some cleanups for page allocator APIs" (Brendan Jackman)
Simplify and refactor the page allocator entry points and flags by
unifying allocation paths, adding internal alloc_flags arguments, and
eliminating redundant __ prefixed alloc_pages variants.
- "Fix incorrect access of hugetlb pte entries" (Dev Jain)
Enforce the consistent use of huge_ptep_get() instead of ptep_get()
for HugeTLB entries and fixes an unaligned address issue in arm64's
huge_ptep_get() implementation
- "mm/damon: validate all parameters in the core" (SJ Park)
Consolidate parameter validation into the DAMON core specifically
within damon_start() and damon_commit_ctx() to centralize error
checking, eliminate caller-side redundant checks and to improve
maintenance efficiency
- "tools/mm/page_owner_sort: fix filtering and cleanup issues" (Yichong
Chen)
Rename is_need() to filter_record() for clearer return semantics, fix
per-record allocation memory leaks and bound output copies in
search_pattern() to address an existing buffer issue
- "memcg: bail out reclaim when memcg is dying" (Jiayuan Chen)
Mitigate a system-wide stall which occurs when a cgroup is removed
while one of its memory control files is doing synchronous reclaim
- "mm/memory-failure: add panic option for unrecoverable pages" (Breno
Leitao)
Introduce an opt-in vm.panic_on_unrecoverable_memory_failure sysctl
that immediately panics the kernel on unrecoverable memory errors in
kernel-owned pages to preserve error context and prevent delayed,
silent data corruption
- "mm/damon: refactor damon_{start,stop,commit}() for simple error
handling" (SJ Park)
Refactor the DAMON core API functions to guarantee that all contexts
are fully stopped when damon_start(), damon_stop(), or damon_commit()
fail, eliminating the need for complex and error-prone caller-side
cleanup code
- "Keep tail page private zero at free and folio split" (Zi Yan)
Add checks to ensure tail_page->private is zero when freeing compound
or high-order pages and when promoting tail pages during large folio
splits. By validating these fields at free and split time, it allows
the removal of redundant private field clearing inside
prep_compound_tail()
- "mm: drop redundant lru_add_drain in anon folio reuse paths" (Barry
Song)
Eliminate redundant lru_add_drain() calls in
wp_can_reuse_anon_folio() and do_swap_page() to reduce LRU lock
contention and system overhead
By validating folio refcounts against the LRU cache before draining
and removing unnecessary drains in the swap path, it achieves up to a
30.5% reduction in drain calls during heavy swap workloads
- "mm: clean up folio LRU and swap declarations" (Jianyue Wu)
Reorganize folio LRU and swap code by relocating page-cluster state
to mm/swap_state.c, renaming mm/swap.c to mm/folio.c, and moving
MM-internal reclaim declarations into mm/internal.h.
- "userfaultfd: working set tracking for VM guest memory" (Kiryl
Shutsemau)
Add userfaultfd support for tracking the working set of VM guest
memory, so a VMM can identify hot pages and reclaim cold ones to
tiered or remote storage
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 2)" (David
Hildenbrand)
Remove the remaining pieces of CONFIG_HAVE_BOOTMEM_INFO_NODE,
performing some smaller cleanups around freeing of reserved vmemmap
pages on the way.
- "mm/damon: update probe hits for runtime parameter commits" (SJ Park)
Ensure that DAMON's probe_hits attribute counter is properly updated
when monitoring intervals are changed at runtime, matching the
behavior of nr_accesses. To achieve this, it refactors and renames
existing helper functions for shared use, applies the updates to
probe_hits, and handles edge cases in damon_probe_hits_mvsum() to
maintain measurement accuracy.
- "KSM: performance optimizations for rmap_walk_ksm" (xu xin)
Resolve a severe KSM reverse-mapping performance bottleneck where
thousands of split VMAs sharing a single anon_vma cause extended lock
contention.
By adding an interval-filtering check during the rmap walk, it
reduces worst-case anon_vma lock hold times from over 500ms down to
under 2ms, preventing application freezes and latency spikes under
memory pressure.
- "mm: split a couple of headers from internal.h" (Mike Rapoport)
Split declarations related to mm_init, memblock, vmalloc and sparse
into new headers
- "KSM: use linear_page_index in collect_procs_ksm()" (xu xin)
Apply the interval tree optimization from rmap_walk_ksm() to
collect_procs_ksm() to avoid iterating over non-matching VMAs during
KSM memory error handling.
It hoists loop-invariant address initialization and restricts the
anon_vma_interval_tree_foreach walk to a targeted page offset range,
reducing redundant checks and improving lookup efficiency.
- "selftests/mm: avoid false failures in hugetlb and KSM tests" (Sayali
Patil)
Fix issues in the hugetlb and KSM MM selftest categories that can
report failures when the prerequisites for the tests are not
satisfied
- "mm/damon: introduce data attributes only monitoring" (SJ Park)
Introduce attribute-weighted region management in DAMON, allowing
users to prioritize specific data attributes (such as page sizes or
cgroups) over or instead of access monitoring.
By assigning weights to attribute probes, DAMON can completely
disable access tracking and adjust monitoring regions based on
weighted probe-hit counters to optimize monitoring quality for
attribute-focused workloads.
- "mm/hmm: Add mmap lock-drop support for userfaultfd-backed mappings"
(Stanislav Kinsburskii)
Extend hmm_range_fault() to support userfaultfd-backed regions by
allowing the mmap lock to be dropped during fault handling via a new
hmm_range_fault_locked() helper.
By accepting a locked pointer and signaling retry status when lock
release occurs, it enables page fault resolution in userfaultfd
regions while preserving backward compatibility for existing callers.
- "mm: make VMA page offset handling more consistent" (Lorenzo Stoakes)
Clean up and standardize how vma->vm_pgoff is accessed and
manipulated across file-backed and anonymous mappings in the kernel
It introduces dedicated helper functions such as vma_start_pgoff(),
vma_end_pgoff(), vma_set_pgoff() and linear_page_delta() while
renaming rmap interval tree helpers to better reflect their
functionality.
These changes establish a cleaner foundation for future work that
will unify virtual page offset indexing for all anonymous and CoW'd
folios.
- "mm: handle device-private PMDs in walk callbacks" (Usama Arif)
Address kernel panics and state corruption caused by MM walk
callbacks reaching non-present device-private PMD swap entries
created during HMM migrations
It ensures that functions which acquire pmd_trans_huge_lock()
properly recognize device-private PMDs instead of assuming a present
THP or a standard migration entry.
- "mm/rmap: Refactor try_to_unmap_one" (Dev Jain)
Refactor try_to_unmap_one by modularizing Hugetlb,
anonymous-lazyfree, and anonymous-swapbacked logic into dedicated
functions, laying the structural groundwork for batched anonymous
large folio unmapping.
- "Docs/ABI/damon: sysfs ABI document fixes and additions" (Song Hu)
Fix typos and fills in missing entries in the DAMON sysfs ABI
document
- "dax/kmem: atomic whole-device hotplug via sysfs" (Gregory Price)
Introduce an atomic sysfs state attribute and supporting DAX/MM
infrastructure to prevent userland races when offlining and removing
entire memory regions
By adding an unplugged state alongside standard online modes, it
enables whole-device atomic hotplug control while preserving backward
compatibility.
- "mm: convert more vm_flags_t users to vma_flags_t" (Lorenzo Stoakes)
Continue transitioning the kernel from the deprecated vm_flags_t type
to vma_flags_t across core memory management infrastructure.
It replaces legacy type usage in core functions such as do_mmap(),
unmapped area allocation, mm->def_vma_flags, and VMA operations like
mlock, mprotect, and mremap.
- "Two small patches to clean up mm/mm_slot.h" (xu xin)
Refactor mm_slot.h by introducing mm_slot_remove() to unify duplicate
slot deletion sequences in khugepaged and KSM. It also adds code
documentation explaining why mm_slot_lookup and mm_slot_insert must
remain as preprocessor macros rather than static inline functions.
- "mm/damon/core: hide core-private struct fields" (SJ Park)
Clean up DAMON core structures by consistently marking internal-only
fields with private: comment tags to prevent improper direct access
from outer layers.
It enforces encapsulation across core structures including
damon_region, damon_target, and damon_ctx and updates DAMON_SYSFS to
interact through approved access APIs instead of exposing raw struct
members.
- "mm/damon: unurgent fixes for infinite loop, NULL de-ref and races"
(SJ Park)
Address potential infinite loops, NULL dereferences, and race
conditions identified in DAMON
It fixes an infinite loop triggered by extreme user configurations, a
NULL pointer dereference within unit tests and minor monitoring
accuracy degradation caused by subtle runtime races.
- "mm/page_alloc: fixes for free_pages_nolock() on RT/UP" (Brendan
Jackman)
Fix an NMI safety flaw in __free_frozen_pages() where freeing pages
on non-SMP or PREEMPT_RT kernels can bypass can_spin_trylock() checks
via non-PCP or isolated migration paths.
It also resolves potential kernel crashes and privilege escalation
risks triggered when BPF tracing runs in NMI context alongside memory
hotplug or large allocation frees.
- "mm/page_alloc: couple of followups for recent cleanups" (Brendan
Jackman)
Clean up and update page allocator nomenclature, documentation, and
debug assertions.
It aligns internal FPI_ flags with the public "nolock" naming
convention, removes outdated internal implementation details from
high-level page allocator comments, and eliminates obsolete
VM_BUG_ON() assertions in allocation paths.
- "mm/mseal: further cleanups" (Lorenzo Stoakes)
Refactor and simplify the mseal implementation by clarifying API
boundaries and removing unnecessary code complexity.
It replaces generic do_mseal() usage outside the syscall with a
dedicated mseal_mmap_page_zero() helper for MMAP_PAGE_ZERO,
eliminates mm_struct parameters to enforce that sealing applies only
to current->mm, and streamlines overall logic and comments with no
functional changes intended.
- "mm/vmscan: fix swappiness=max and clean up per-node proactive
reclaim" (Ridong Chen)
Resolve reclaim behavior bugs and clean up function parameters across
memory reclaim paths
It fixes swappiness=max in both standard reclaim and MGLRU so
unswappable anonymous memory no longer falls back to evicting page
cache, ensures reclaim_store() returns accurate error codes instead
of collapsing all failures into -EAGAIN, and removes the obsolete
gfp_mask parameter from __node_reclaim().
- "mm: mincore: misc cleanups" (Kefeng Wang)
Clean up and simplifies the mincore code. Most importantly, it
removes the historical special behavior that always reports VM_PFNMAP
pages as non-resident.
- "mm/huge_memory: drop dead split helper variants" (Kiryl Shutsemau)
Two trivial cleanups in the folio split API
- "mm/damon: fix uninitialized DAMOS field and kunit exec expectation
bugs" (SJ Park)
Resolve minor operational and testing bugs in DAMON identified by
Sashiko. It initializes the damos->last_applied field to prevent
occasional efficiency degradation and fixes invalid memory accesses
in DAMON KUnit tests during test failure handling.
- "cleanup for stable_page_flags()" (Jinjiang Tu)
Clean up and refactor stable_page_flags() used by /proc/kpageflags
without altering functionality.
It uses BIT_ULL() to prevent shift-overflow warnings on 64-bit flag
bits, converts folio-specific flag checks to standard folio_test_*()
helpers, and removes redundant CONFIG_PAGE_IDLE_FLAG handling.
- "Batch unmap of uffd-wp file folios" (Dev Jain)
Extend batched folio unmapping support to file folios within
userfaultfd write-protect (uffd-wp) VMAs by adding batching
capabilities to pte_install_uffd_wp_if_needed().
This removes special-case restrictions on uffd-wp VMAs in
try_to_unmap_one(), significantly simplifying the function's control
flow and complexity.
- "mm/early_ioremap: clarify and clean up early_ioremap_reset()"
(Sang-Heon Jeon)
Clarify and clean up the architecture-specific usage of
__late_set_fixmap() and __late_clear_fixmap() after
early_ioremap_reset()
It adds explicit documentation regarding when early_ioremap_reset()
must be called and removes redundant macro definitions and reset
calls in the RISC-V and ARM64 architectures.
- "mm: fix reclaim storms in defrag_mode" (Johannes Weiner)
Address severe performance regressions, swap storms, and spurious
OOMs caused by vm.defrag_mode=1 under high memory pressure in Meta
production
It updates the page allocator slowpath so non-movable allocation
requests actively trigger direct reclaim and direct compaction at
pageblock_order scale, allowing them to claim whole pageblocks rather
than spinning unproductively.
- "zram: lockmap tweaks" (Sebastian Siewior)
Optimize and fix lockdep tracking for zram devices by consolidating
per-entry lockmaps and isolate lock classes across multiple instances
This reduces memory overhead by replacing per-entry lockdep_map
instances with a single map per struct zram, and assigns a dynamic
lock_class_key to each instance to prevent false deadlock reports
when different zram devices are backed by distinct filesystems.
* tag 'mm-stable-2026-08-18-18-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (501 commits)
selftests/mm: thuge-gen: fix test_shmget() for PAGE_SIZE check
selftests/mm: unpoison pages in memory-failure teardown
mm/shmem: downgrade final i_blocks check in shmem_evict_inode() to pr_warn()
mm/khugepaged: replace mutex_lock/mutex_unlock usage with guard macro
mm/zsmalloc: fix release order of locks in zs_page_migrate()
Documentation: zram: remove sections numbering
ksm: stop iterating VMAs when ksm_test_exit returns true
mm: fold userfaultfd_rwp() to false without CONFIG_ARCH_HAS_PTE_PROTNONE
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
zram: use a custom key for each zram object
zram: move lockmap to be per-zram instead per table
selftests/mm: fix gup_longterm EINVAL error message
mm: page_alloc: fix non-movable reclaim storm in defrag_mode
mm: page_alloc: move capture_control to the page allocator
mm: compaction: support non-movable compaction for pageblock requests
mm: page_alloc: __GFP_FS lockdep annotation for direct compaction
hugetlb: evaluate subpool free state while locked
mm/damon: remove trailing semicolons after function definitions
mm/damon/ops-common: prevent migration fallback to non-target nodes
mm/damon: update outdated comment about DAMOS filter handling
...
|
|
Pull CXL updates from Dave Jiang:
"This includes the remaining patches to complete the basic support for
CXL type2 (accelerators) drivers by the CXL core. A set of unit
testing support to catch regressions for the CXL core type2 exported
functions has also been added. The actual CXL type 2 driver support
for the AMD Solarflare NIC driver has been picked up by net-dev.
A set of preparatory patches has been picked up from the CXL port
error handling series in order to reduce the number of patches in that
series for review. The rest of that series is getting close to be
merged but was not ready for the 7.3 merge window.
There are also a number of misc patches and a large number of bug
fixes against pre-existing issues flagged by sashiko reviews as
contributors post new patches on the mailing list. We will continue to
work through the sashiko raised issues as they show up."
* tag 'cxl-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (35 commits)
cxl/Documentation: Spell out globbed sysfs attribute names
cxl: Rename find_cxl_port() to find_cxl_port_by_dport()
cxl: Tighten CPER kfifo registration API and symbol visibility
acpi/apei/ghes: Use raw_spinlock_t for CXL CPER work locks
cxl/ras: Fix cxl_rch_get_aer_severity() wrong severity register
cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read
cxl/test: Assign one mock memdev a full-width serial number
cxl/core: Format the memdev serial number as unsigned in TP_printk
cxl/pmem: Format the nvdimm serial number as unsigned decimal
cxl: Use %pe to print error pointers
cxl/region: Use __free(put_device) in find_pos_and_ways()
cxl/region: Fix use-after-free in find_pos_and_ways() error path
cxl: Deny Features commands on the RAW mailbox path
cxl/features: Clamp Get Feature output size to the remaining buffer
cxl/features: Reject Set Features output buffer smaller than the header
cxl/features: Reject Get Feature count larger than the output buffer
cxl/port: Restart port enumeration when a sibling adds the dport first
cxl/features: Serialize multi-part Get/Set Feature transfers
cxl/pci: Honor -EPROBE_DEFER from component register setup
cxl/mbox: Break poison list loop on an empty payload
...
|
|
Update the URL of the upstream ACPICA repository after recent changes in
the upstream ACPICA project.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/1867400.VLH7GnMWUR@rafael.j.wysocki
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a not-too-busy cycle for docs; here's the highlights:
- A (hopefully) consensus change to our LLM-attribution requirements,
removing the specific model name from the Assisted-by tag
- A couple of new realtime documents
- Various docs-build-system fixes
- Ongoing work with the Chinese, Portuguese, and Japanese
translations
...and lots of typo fixes, grammar tweaks, etc"
* tag 'docs-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (85 commits)
Doc: admin-guide: pm: Remove unnecessary backticks and fix a spell
Documentation: Extend the real-time hardware bits with some firmware bits
docs: pt_BR: Reorganize process/index.rst to follow english structure
docs: conf.py: fix the 'utf-8' typo
doc tools: fix 'path' typos
Documentation: real-time: Add kernel configuration guide
docs: python: abi_regex: convert adjacent index placeholders
docs: python: abi_regex: catch the right exception for a bad regex
docs: sphinx-build-wrapper: include localversion in kernel version string
Documentation: html: adjust sidebar section titles styling
Documentation: html: show sections in the sidebar
checkpatch.pl: adapt to new Assisted-by: format
MAINTAINERS: update Traditional Chinese documentation maintainers
docs: pt_BR: process: Translate CVE documentation
docs: pt_BR: translate the management-style.rst to Brazilian Portuguese
docs: xforms_lists: support DEFINE_IDTENTRY_IRQ()
coding-assistants: simplify attribution
docs: translations: pt_BR: translate email-clients.rst
docs: pt_BR: process: Translate the security-bugs.rst
doc:it_IT: align doc-guide translation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"One small feature this cycle, the noiommu mode is useful in
single-purpose VMs running something like DPDK. It avoids the double
translation overhead and it seems to be commonly used with some hacks.
Summary:
- Formal API for "no iommu" mode in VFIO. iommufd now works in this
environment and provides page pinning and phyiscal address services
to userspace. This avoids nasty fragile tricks with mprotect and
pgmap
- Fix sykzaller crash racing change_process with map_pages
- Various skyzkaller/AI fixes for the selftests"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix UAF in selftest IOPF reporting
iommu/iommufd: Fix NULL pointer deref in iommufd_ioas_change_process when racing with iopt_map_file_pages
Documentation: Update VFIO NOIOMMU mode
vfio: Enable cdev noiommu mode under iommufd
iommufd: Add an ioctl to query PA from IOVA for noiommu mode
iommufd: Allow binding to a noiommu device
iommufd: Move igroup allocation to a function
iommufd: Support a HWPT without an iommu driver for noiommu
iommufd: Simplify iommufd_device_remove_vdev()
iommufd: Fix grammar and spelling in comments
iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add
iommufd/selftest: Fix dmabuf leak in iommufd_test_dmabuf_get()
iommufd/selftest: Avoid selftest dirty bitmap size wrap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"container_of:
- Apply typeof_member(), remove the local __mptr variable to
eliminate variable shadowing warnings on nested container_of()
calls, and remove unnecessary parentheses
core:
- Add driver name to probe debug print for initcall_debug
- Avoid repeatedly printing the same 'Fixed dependency cycle' log
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device()
- Remove statistics group if encryption group creation fails in
transport_add_class_device()
debugfs:
- Fix lockdown check for mmap_prepare()
- Warn if file creation failed due to uninitialized debugfs
device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from
DEV_PROP_REF properties to enable automatic probe ordering. Add
kunit-managed fwnode helpers and test coverage
- Fix infinite loop in fwnode_for_each_child_node() when the
secondary fwnode has more than one child. Add test cases
- Fix out-of-bounds access in software_node_get_reference_args() when
called with index -1 (UINT_MAX)
- Refactor to use RAII approach with __free()
- Add Bartosz Golaszewski as software node reviewer
firmware loader:
- Fix race where a sysfs fallback request can complete before being
queued as pending, leading to a use-after-free on the next fallback
request
- Reject 0-size built-in firmware and fail the build on empty
firmware files in CONFIG_EXTRA_FIRMWARE
kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros
and allow the constification of kobject attributes, enabling them
to reside in read-only memory
platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(),
and platform_device_set_of_node_from_dev() helpers that encapsulate
firmware node reference counting for dynamically allocated platform
devices
Convert all in-tree users that manually assigned dev.of_node or
dev.fwnode, fixing a pre-existing refcount bug in powermac. Switch
to counting references of all firmware node types, not only OF
nodes
- Unify the release path for dynamically allocated platform devices
by removing platform_device_release_full(). Amend the fwnode setter
API contract to warn if a primary software node is overwritten. Add
KUnit tests for correct software node removal on device
unregistration
Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant
ForLt types
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements
from kernel::transmute traits to zerocopy traits
- Device:
- Add BoundInternal device context and InternalBoundContext trait
for bus abstractions that need internal access to a bound
device.
- Make the lifetime on Core and CoreInternal invariant to prevent
coercion to shorter lifetimes
- Devres:
- Fix race between concurrent revokers where the losing revoker
could return before the winning revoker finished dropping the
inner data, causing use-after-free.
- Ensure revocation is complete before the device finishes
unbinding by making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens
'static back to the caller's borrow scope. Implement ForLt and
CovariantForLt for Bar, IoMem, and ExclusiveIoMem
- Driver:
- Switch from index-based to pointer-based device ID info lookup,
storing static references in driver_data. Centralize device ID
handling in device_id.rs, removing the open-coded ACPI/OF
matching logic and duplicate ID table from driver.rs
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type
for the existing untyped case), create view types representing
subregions of a mapped I/O region, and add io_project!() for
safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io)
with a blanket implementation, preventing implementers from
overriding provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile
access, and make Coherent implement Io via an I/O view type.
Add IoSysMap as sum type of Mmio and SysMem. Add copying
methods (memcpy_{from,to}io()) and read_val()/write_val() for
typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!()
for primitives and copying methods for aggregates; drop the old
macros. Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro,
remove unused rule arguments, and use path fragments for alias
destinations
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers
by removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning
type, giving drivers explicit control over the allocation
lifetime. IrqVector embeds a resolved IrqRequest, making the
conversion infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX,
PCI_IRQ_MSI, or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline
- Serdev:
- Add Rust abstractions for the serial device bus, including
serdev::Driver trait, serdev::Device wrapping struct
serdev_device, and serdev::Adapter implementing
RegistrationOps. Includes a sample driver. Markus Probst takes
over as serdev maintainer for both C and Rust code
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an
unsafe CovariantForLt subtrait guaranteeing covariance,
enabling invariant types (e.g. those containing Mutex<&'bound T>)
to participate in the ForLt abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef
misc:
- Avoid iattr allocation in kernfs listxattr by using
kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark
internal property data as private for kernel-doc, and add
property.h/fwnode.h to driver-api infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h"
* tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (129 commits)
rust: pci: expose the allocated interrupt type
PCI: Add pci_irq_type() to query the allocated interrupt type
rust: pci: remove request_irq() and request_threaded_irq() from Device
rust: pci: resolve IRQ in index() and embed IrqRequest in IrqVector
rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type
kernfs: avoid iattr allocation in listxattr
rust: serdev: use ThisModule::as_ptr() instead of field access
ACPI/IORT: use platform_device_set_fwnode()
ACPI/APMT: use platform_device_set_fwnode()
firmware_loader: do not queue completed sysfs fallback requests
rust: pci: Mark Device refcount methods inline
rust: irq: make Registration compatible with lifetime-bound drivers
rust: net/phy: remove expansion from doc
rust: dma: return zero for Coherent reads past EOF
rust: io: register: use path fragment for alias destination
rust: io: register: remove unused rule arguments
rust: io: register: dispatch shortcut rules internally
MAINTAINERS: add sys_soc.h to DRIVER CORE
rust: debugfs: remove unsafe blocks from traits impl for Vec
rust: debugfs: migrate debugfs traits requirements to zerocopy
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core: added ISP statistics support and per-block validation
- v4l2-core: Allow unknown HDR10 white point and luminance
- New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor
- New codec: Milos: VPU v2.0 codec support
- isp driver: gained support for Dreamchip RPPX1 ISP framework
- vsp1 driver: gained support for RZ/T2H and RZ/N2H
- Novalake driver: gained CVS support for new NVL hardware
- dvb-core: fix feed leak on failed DMX_ADD_PID
- several driver fixes, cleanups and minor improvements
* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
media: ipu-bridge: check all DMI entries when overriding sensor rotation
media: v4l2-async: avoid deleting unlinked ASC entry on link error
media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
media: intel/ipu6: fix async notifier cleanup leak on parse error
media: staging/ipu7: fix async notifier UAF on probe error path
media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
media: rcar-isp: Fix VSPX reference leaks
media: rcar-isp: Release ISPCORE resources
media: i2c: imx415: Release runtime PM reference on VBLANK error
media: i2c: imx415: Return test pattern write errors
media: renesas: vsp1: Declare index variables in for loop statement
media: renesas: vsp1: Make reset control optional to support platforms without a reset line
media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
media: nxp: imx8-isi: Add additional 32-bit RGB format support
media: nxp: imx8-isi: Add 16-bit raw Bayer format support
media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
media: nxp: imx8-isi: Correct color map between V4L2 and ISI
...
|
|
into clk-pile
Pull clk patches from Brian Masney:
- New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),
UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree
bindings. Si549 support was added to the existing si544 driver.
- New clock and reset support for the Aspeed AST2700 PECI controller and Airoha
EN7523 PCIe PERSTOUT reset lines.
- The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to
the existing optional variant, and exports
devm_clk_hw_register_composite_pdata() for modular drivers.
- Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1
support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL
charge pump/lock parameter programming during dynamic reconfiguration.
- Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in
the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted
gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on
registration failure, a prepare reference leak in the palmas driver,
unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in
pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a
clocking-wizard clock difference detection bug.
- Various cleanups across tegra, st, and mvebu providers to stop misusing the
consumer clock API, along with other minor fixes and improvements.
Signed-off-by: Brian Masney <bmasney@redhat.com>
* tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits)
clk: tegra: set up proper EMC clock implementation for Tegra114
clk: clocking-wizard: remove 20kHz restriction
clk: clocking-wizard: optimize clock search
clk: clocking-wizard: fix clock difference detection
clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
clk: tegra: support 48MHz clock for pll_p_out1
clk: aspeed: add AST2700 PECI clock
dt-bindings: clock: ast2700: add PECI clock
clk: mediatek: Add mt8173-mfgtop driver
dt-bindings: clock: mediatek: Add mt8173 mfgtop
clk: tegra: clean-up simple provider misuse of the consumer API
clk: st: clean-up simple provider misuse of the consumer API
clk: mvebu: clean-up simple provider misuse of the consumer API
clk: remove conditional return with no effect
clk: Add devm_clk_bulk_get_enable()
clk: en7523: add support for dedicated PCIe PERSTOUT reset
dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT
arm64: dts: cix: sky1: add audss cru
reset: cix: add sky1 audss auxiliary reset driver
...
|
|
Pin-level attributes (frequency, phase adjust, embedded sync, reference
sync) are properties of the pin itself, not of a particular DPLL device.
The get callbacks already use only the pin owner's DPLL reference
(via dpll_pin_own_dpll_ref_first()), but the set callbacks iterate over
all registered DPLL references and invoke the set operation on each one.
This is redundant because a pin is a single physical entity - setting
its frequency or phase adjust once through the owner's ops is sufficient.
Calling set on every registered DPLL just results in duplicate HW writes
for drivers that share a pin across multiple DPLL devices (e.g. ice
registers each input pin with both the EEC and PPS DPLL, zl3073x
registers input pins with every DPLL channel).
Simplify dpll_pin_freq_set(), dpll_pin_esync_set(),
dpll_pin_ref_sync_state_set() and dpll_pin_phase_adj_set() to call the
set callback only through the owner's DPLL reference, matching the
existing get-side behavior. This removes the xa_for_each iteration
loops, the now-unnecessary rollback logic, and several local variables.
The -EOPNOTSUPP validation loop, which checked ops support across all
owner-matching references, is replaced with a direct check on the
single owner reference returned by dpll_pin_own_dpll_ref_first().
The documentation in dpll.rst is updated to reflect that pin-level
attributes are set through the pin owner's dpll reference only.
No existing driver is affected:
- ptp_ocp and mlx5 register each pin with a single DPLL.
- ice registers input pins with two DPLLs (EEC and PPS) using
identical ops and pin_priv; the set callbacks address the HW by
pin index, not by DPLL, so the second call was a no-op.
- zl3073x registers input pins with every DPLL channel; the set
callbacks address HW by pin/ref ID regardless of DPLL. The
ref_sync_set callback was the only one with per-channel behavior,
addressed by the preceding patch.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260807095926.386923-3-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Correct "allows to you" to "allows you to".
Signed-off-by: Lukasz Tymoszczuk <lukastymo@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260801111804.3593320-1-lukastymo@gmail.com>
|
|
Add more driver core header files to infrastructure.rst for
completeness.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260726211200.2643484-1-rdunlap@infradead.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Tejun changd percpu_ref to use long instead of int back in 2014 but missed
updating this bit of the documentation. Also add the documentation to the
htmldocs.
Link: https://lore.kernel.org/20241211204017.184512-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
devm_clk_bulk_get_optional_enable() gets, prepares and enables a set of
clocks with device-managed cleanup, but treats every clock as optional:
a missing clock is silently returned as NULL instead of failing.
Consumers that need a fixed set of mandatory clocks enabled for the
lifetime of the device currently have to open-code devm_clk_bulk_get()
followed by clk_bulk_prepare_enable(), which loses the managed disable on
unbind, or fall back to per-clock devm_clk_get_enabled() calls.
Add devm_clk_bulk_get_enable() as the non-optional counterpart. The
underlying __devm_clk_bulk_get_enable() helper already supports the
required (optional = false) path, so only export a thin wrapper for it.
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The ISSEI (Intel Silicon Security Engine Interface)
subsystem provides a communication channel between the host and the
Silicon Security Engine.
Prepare basic driver functions and character device
for user-space communication.
Add DMA access routines for ISSEI HECI devices.
Add of DMA-related structures and implementation of routines for
setting up DMA, as well as reading and writing DMA buffers.
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Co-developed-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Vitaly Lubart <lubvital@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260513-issei-for-upstream-v1-1-f590038678f9@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "Programming Guide for Linux USB Device Drivers" was last hosted
at lmu.web.psi.ch and is no longer reachable. The original source
(TUM, cs.tum.edu) is also defunct. Remove the dead reference rather
than link to a third-party archive of a 20+ year old, outdated guide.
Signed-off-by: Utsav Shankar <utsaveshan0206@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260713150544.20962-1-utsaveshan0206@gmail.com>
|
|
Document the NOIOMMU mode with newly added cdev support under iommufd.
Link: https://patch.msgid.link/r/7d4a050505317a29f7f2c32d024333b7b5c7d4fd.1783360051.git.jacob.pan@linux.microsoft.com
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Fixes: 2c6cf6ab1564 ("iommufd: Allow binding to a noiommu device")
Reviewed-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix the spelling of 'bellow' to 'below' in the PM API section.
Signed-off-by: Yuhong Cheng <ceohunk@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add myself as maintainer of media-ci.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add DPLL_PIN_CAPABILITIES_STATE_CONNECTED_OVERRIDE capability flag
that indicates a pin can be set to connected regardless of the
current DPLL device mode, overriding the active input selection.
This is useful for automatic-only DPLL devices where mode cannot
be switched to manual, allowing userspace to directly connect
such pin from automatic mode.
The capability requires STATE_CAN_CHANGE to be set as well;
dpll_pin_register() warns if a driver violates this.
Document the new capability in the Pin selection section of
Documentation/driver-api/dpll.rst.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260630125536.720717-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that struct acpi_driver has no more users, eliminate it along with
all of the code related to it.
Also remove the file added by commit b8c8a8ea18ad ("ACPI: Documentation:
driver-api: Disapprove of using ACPI drivers") because it will not be
necessary any more after eliminating struct acpi_driver from the code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/5132944.31r3eYUQgx@rafael.j.wysocki
|
|
Previously, configuration and preparation required two separate calls. This
works well when configuration is done only once during initialization.
However, in cases where the burst length or source/destination address must
be adjusted for each transfer, calling two functions is verbose and
requires additional locking to ensure both steps complete atomically.
Add a new API dmaengine_prep_config_single() and dmaengine_prep_config_sg()
and callback device_prep_config_sg() that combines configuration and
preparation into a single operation. If the configuration argument is
passed as NULL, fall back to the existing implementation.
Tested-by: Niklas Cassel <cassel@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260521-dma_prep_config-v7-1-1f73f4899883@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The clk documentation currently has a separate list of some members of
struct clk_core and struct clk_ops. Now that all of these structures
have proper kernel docs, let's go ahead and just include them here via
the identifiers statement in kerneldoc.
While changes are being made here, let's also include the clk flags.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Fix two obvious typos in the "kmem conversion" section.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260614161458.88942-1-zenghui.yu@linux.dev
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull more documentation updates from Jonathan Corbet:
"A handful of late-arriving docs fixes, along with one document update
that fell through the cracks before"
* tag 'docs-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
docs: tools: Fix typo 'ackward' to 'awkward' in unittest.rst
kdoc: xforms: ignore special static/inline macros
kdoc: xforms_lists: handle DECLARE_PER_CPU() in kernel-doc
MAINTAINERS: Fix regex for kdoc
docs: kgdb: Fix path of driver options
Documentation: tracing: fix typo in events documentation
Docs/driver-api/uio-howto: document mmap_prepare callback
docs/mm: clarify that we are not looking for LLM generated content
kernel-doc: xforms: support __SYSFS_FUNCTION_ALTERNATIVE()
|
|
Pull ipmi updates from Corey Minyard:
"Lots of little tweaks.
Nothing huge, the biggest issue was a possible refcount underflow that
could cause a memory leak in some situations. Otherwise, fixing
formatting and style things and some docs typos"
* tag 'for-linus-7.2-1' of https://github.com/cminyard/linux-ipmi:
docs: ipmi: Fix path of the "hotmod" module parameter
ipmi: Drop unused assignment of platform_device_id driver data
ipmi: si: Use platform_get_irq_optional() to retrieve interrupt
ipmi: fix refcount leak in i_ipmi_request()
ipmi:ssif: Drop unused assignment of platform_device_id driver data
ipmi: Fix user refcount underflow in event delivery
ipmi: Use named initializers for struct i2c_device_id
ipmi: Use LIST_HEAD() to initialize on stack list head
ipmi:kcs: Reduce the number of retries
|
|
The UIO howto still documents an mmap callback in struct uio_info.
That field was replaced by mmap_prepare, which takes a struct
vm_area_desc.
A UIO driver following the current howto no longer builds because
struct uio_info has no mmap member. Update the documented callback
signature and matching text to match the current API.
Fixes: 933f05f58ac6 ("uio: replace deprecated mmap hook with mmap_prepare in uio_info")
Signed-off-by: Doehyun Baek <doehyunbaek@gmail.com>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260622181821.1195257-1-doehyunbaek@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 7.2-rc1.
Overall we end up removing more code than added, due to an obsolete
synclink_gt driver being removed from the tree, always a nice thing to
see happen.
Other than that driver removal, major things included in here are:
- max310x serial driver updates and fixes
- 8250 driver updates and rework in places to make it more "modern"
- dts file updates
- serial driver core tweaks and updates
- vt code cleanups
- vc_screen crash fixes
- other minor driver updates and cleanups
All of these have been in linux-next for well over a week with no
reported issues"
* tag 'tty-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
serial: 8250_pci: Don't specify conflicting values to pci_device_id members
vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write
serial: qcom_geni: Fix RX DMA stall when SE_DMA_RX_LEN_IN is zero
vt: merge ucs_is_zero_width()/ucs_is_double_width() into ucs_get_width()
serial: 8250: fix possible ISR soft lockup
dt-bindings: serial: rs485: remove deprecated .txt binding stub
serial: qcom-geni: trace: Add tracepoint support for Qualcomm GENI serial
tty: serial: Use named initializers for arrays of i2c_device_data
serial: 8250_dw: remove clock-notifier infrastructure
serial: 8250_dw: unregister 8250 port if clk_notifier_register() fails
amba/serial: amba-pl011: Bring back zx29 UART support
serial: 8250: Add support for console flow control
serial: 8250: Check LSR timeout on console flow control
serial: 8250: Set cons_flow on port registration
tty: serial: 8250: protect against NULL uart->port.dev in register
arm64: dts: add support for A9 based Amlogic BY401
dt-bindings: arm: amlogic: add A311Y3 support
serial: max310x: fix compile errors if CONFIG_SPI_MASTER is disabled
serial: qcom-geni: Avoid probing debug console UART without console support
serial: max310x: add comments for PLL limits
...
|
