| Age | Commit message (Collapse) | Author |
|
https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mm/linux.git
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git
|
|
# New commits in perf/core:
68aca309e49c ("perf/x86/intel: Add sanity check for PEBS record/fragment size")
c34db2f95094 ("perf/x86: Activate back-to-back NMI detection for arch-PEBS induced NMIs")
00cf8daabe2b ("perf/x86/intel: Advertise PERF_PMU_CAP_SIMD_REGS capability")
c4fabb67a47f ("perf/x86/intel: Support arch-PEBS based SIMD/eGPRs sampling")
098cdd582a9b ("perf/x86: Support SSP sampling using sample_regs_* fields")
578460d9af8d ("perf/x86: Support eGPRs sampling using sample_regs_* fields")
a2c64c74c029 ("perf: Enhance perf_reg_validate() with simd_enabled argument")
74d55a827e31 ("perf/x86: Support OPMASK sampling using sample_simd_pred_reg_* fields")
3807f6996a0b ("perf/x86: Support ZMM sampling using sample_simd_vec_reg_* fields")
b76210d32147 ("perf/x86: Support YMM sampling using sample_simd_vec_reg_* fields")
e9d76ada769c ("perf/x86: Support XMM sampling using sample_simd_vec_reg_* fields")
918b7d6d1729 ("perf: Add sampling support for SIMD registers")
edd9aec51213 ("perf/x86: Enable XMM register sampling for REGS_USER case")
b84c96283684 ("perf/x86: Enable XMM register sampling for non-PEBS events")
c09466807467 ("perf/x86/intel: Centralize PERF_PMU_CAP_EXTENDED_REGS updates")
05fe8825796e ("perf: Move and enhance has_extended_regs() for arch-specific use")
450d73dc5f91 ("x86/fpu: Add update_fpu_state_and_flag() helper")
03b89c9f202e ("x86/fpu/xstate: Add xsaves_nmi() helper")
9c05620b4971 ("perf/x86: Use x86_perf_regs in NMI handlers")
cb388bd530cc ("perf: Eliminate duplicate arch-specific function definitions")
bbdf84fcedfa ("perf/x86/intel: Convert x86_perf_regs to per-cpu variables")
62e074f55f41 ("perf/x86/intel: Enable large PEBS sampling for XMMs")
9106892e27ca ("perf/x86: Move hybrid PMU initialization before x86_pmu_starting_cpu()")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
mm-unstable into for-next
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
|
|
Currently, s390 has the ability to configure the maximum kernel command
line size via Kconfig (CONFIG_COMMAND_LINE_SIZE). Other architectures
define a hardcoded COMMAND_LINE_SIZE macro in their setup.h headers.
In some use cases, such as netboot kernels, rootfs configurations, or
larger initramfs setups, a larger command line size is required. While
for embedded workloads, it can be reduced to save memory.
Move CONFIG_COMMAND_LINE_SIZE out of arch/s390/Kconfig and into
init/Kconfig under General setup, and update every architecture's setup.h
header to define COMMAND_LINE_SIZE as CONFIG_COMMAND_LINE_SIZE.
For user-space API (uapi) headers, wrap the definition in an `#ifdef
__KERNEL__` guard and retain the historical hardcoded default in the
`#else` block. When user-space headers are installed via `make
headers_install`, unifdef strips out the kernel section, ensuring the same
value as before for user-space applications including `<asm/setup.h>`.
For S390, the range is kept the same, but other architectures have varying
constraints. S390 requires a minimum of 896 bytes to protect legacy
bootloaders from overwriting the .text section. ARM, M68K, and NIOS2
allocate the command line directly on severely constrained decompressor
stacks, so their ranges are strictly capped at 2048 bytes to prevent
deterministic stack exhaustion and boot panics. PowerPC (PPC) boot
wrappers silently truncate arguments past 2048 bytes, so it is also capped
at 2048 to prevent silent parameter loss.
The SuperH (SUPERH) boot parameter page allocates exactly PAGE_SIZE
(typically 4096 bytes), and placing a 4096-byte command line starting at
offset 256 would cause strscpy() to read out of bounds; it is capped at
3840 bytes. Alpha physically limits its boot parameter block to 256
bytes, so its limit is strictly locked to 256. All other architectures
are capped at 4096 bytes to prevent unreasonable allocations.
Link: https://lore.kernel.org/20260818231646.804507-2-wfelipe@google.com
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Wilson Felipe Pereira <wfelipe@google.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now every architecture has been converted to support
CONFIG_MMU_GATHER_RCU_TABLE_FREE, this configuration option no longer
makes any sense to keep around.
Therefore remove it, and remove all the dead code that existed for
!CONFIG_MMU_GATHER_RCU_TABLE_FREE architectures previously.
Additionally, CONFIG_MMU_GATHER_TABLE_FREE is no longer necessary, as all
architectures instead use CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE when a custom
__tlb_remove_table() is required, so remove this too.
A number of architectures only enabled CONFIG_MMU_GATHER_RCU_TABLE_FREE if
CONFIG_MMU was set, however the mmu_gather logic only actually does
something meaningful if CONFIG_MMU is set (mmu_gather.c is only compiled
in this case, for instance).
As a result, there's no need to gate any of this logic on CONFIG_MMU
explicitly.
CONFIG_PT_RECLAIM however does have a strict dependency on CONFIG_MMU, so
make this dependency explicit.
Additionally, correct comments to remove references to non-RCU page table
gathering and make it clear that this is not 'semi-RCU', nor has it been
since commit 1fb3d8c20bfa ("mm/mmu_gather: replace IPI with
synchronize_rcu() when batch allocation fails").
With this change in place the kernel policy is now that all page tables
are freed after an RCU grace period, and thus it is now safe to
unconditionally perform page table walks under RCU, safe in the knowledge
that page tables will not be freed underneath the walker.
This is all that is guaranteed, however, so naturally it is still
incumbent upon page table walkers to ensure that the page table entries
are as expected.
Link: https://lore.kernel.org/20260908-rcu-pagetable-freeing-v2-11-1f60b64e878e@kernel.org
Signed-off-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Acked-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are no more users left for any pxd_ERROR() either in generic MM or
in the platform MM. Hence all these platform macros along with their
generic fallback could be dropped across the tree.
Link: https://lore.kernel.org/20260831054331.625505-9-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The uctl/usbn device-tree fixups in octeon_prune_device_tree() - which
set the board's USB reference-clock frequency and type from
__cvmx_helper_board_usb_get_clock_type() - are guarded by
"#ifdef CONFIG_USB", which is false when USB is built as a module. The
fixups then silently disappear and octeon-hcd sees whatever default the
DTS carries (12MHz crystal in octeon_3xxx.dts), leaving the PHY dead or
the bus erroring on boards with a different reference clock.
Use IS_ENABLED() so USB=m gets the same fixups as USB=y.
Fixes: 7fd57ab9d9cf ("MIPS: Octeon: Fix compile error when USB is not enabled.")
Assisted-by: Claude:claude-opus-5
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
On I6500 CPU cores, lld and scd give no ordering guarantees (same as all
other instructions). To respect the assumption that arch_cmpxchg() is
fully ordered, we must inject sync instructions above and below our
lld/scd loops using the already in place WEAK_REORDERING_BEYOND_LLSC
infrastructure.
Otherwise, bad things can happen:
[ 34.054496] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000000, epc == a80000080838e01c, ra == a80000080838dfc4
[ 34.054559] Oops[#1]:
[ 34.069561] CPU: 3 UID: 0 PID: 170 Comm: pipe_race Not tainted 7.2.0-rc6-01553-gb73c35220968-dirty #103 VOLUNTARY
[ 34.079932] Hardware name: Mobile EyeQ5 MP5 Evaluation board
[ 34.085592] $ 0 : 0000000000000000 0000000000000001 0000000000000000 0000000000000000
[ 34.093616] $ 4 : a800000808ee2618 000000000b7a879d 0000000000001000 0000000000000000
[ 34.101638] $ 8 : 0000000000e3f2c9 0000000000000000 a800000808a2a9f8 0000000000000000
[ 34.109660] $12 : a8000008139ffcd8 ffffffff84080018 a80000080837fae0 7878787878787878
[ 34.117682] $16 : a800000807e82940 0000000000001000 0000000000000000 0000000000000000
[ 34.125704] $20 : a800000802920e00 a8000008139ffdf8 a800000802649400 0000000000e3f2c9
[ 34.133726] $24 : 0000000000000006 00000001200406e0
[ 34.141783] $28 : a8000008139fc000 a8000008139ffd10 0000000000e3f2c8 a80000080838dfc4
[ 34.149837] epc : a80000080838e01c anon_pipe_read+0xd4/0x428
[ 34.155697] ra : a80000080838dfc4 anon_pipe_read+0x7c/0x428
[ 34.161549] Status: 140000e3 KX SX UX KERNEL EXL IE
[ 34.166551] Cause : 40800408 (ExcCode 02)
[ 34.170574] BadVA : 0000000000000000
[ 34.174161] PrId : 0001b028 (MIPS I6500)
[ 34.178183] Process pipe_race (pid: 170, threadinfo=000000005ca35720, task=00000000e1013890, tls=000000014ebbb780)
[ 34.188568] Stack : a800000802649400 0000000000000000 0000000000000000 a8000008139ffdd0
[ 34.196623] 0000000000000fba a800000808ee0000 0000000000000001 a8000008130c3e80
[ 34.204676] a8000008080d1280 a8000008139ffd58 a8000008139ffd58 1dbd2b22ea1dd500
[ 34.212729] a800000802649400 a800000808ee0000 ffffffffffffffea 0000000000000001
[ 34.220783] 0000000000001000 0000000000000000 00000001200ae518 ffffffffffffffff
[ 34.228836] 000000fffbe0e530 a80000080837edf4 000000fffbe0e530 0000000000000000
[ 34.236890] 0000000000000000 0000000000000000 000000014ebb55a0 0000000000001000
[ 34.244943] 0000000000000001 a800000802649400 0000000000000000 0000000000000000
[ 34.252996] 0000000000000000 0000400400000000 0000000000000000 1dbd2b22ea1dd500
[ 34.261049] 00000000140000e3 a800000802649400 a800000802649400 a800000808ee0000
[ 34.269103] ...
[ 34.271568] Call Trace:
[ 34.274026] [<a80000080838e01c>] anon_pipe_read+0xd4/0x428
[ 34.279533] [<a80000080837edf4>] vfs_read+0x25c/0x318
[ 34.284607] [<a80000080837faac>] ksys_read+0x104/0x138
[ 34.289763] [<a80000080802b9cc>] syscall_common+0x44/0x68
[ 34.295187]
[ 34.296689] Code: f84000cf 02209825 de020010 <dc420000> d8400004 02002825 0040f809 02802025 f84000c3
[ 34.306504]
[ 34.308099] ---[ end trace 0000000000000000 ]---
My initial reproducer was the xdp-tools test suite. A standalone
reproducer would be an lld/scd loop that, when the read is reordered by
the CPU, triggers a fault. We can achieve this from userspace by
stressing an anonymous pipe, which uses a mutex. Program used:
// SPDX-License-Identifier: GPL-2.0
// pipe_race.c - reproducer for MIPS LL/SC reordering vs fs/pipe.c
//
// Two userspace processes on an anonymous pipe:
// parent = writer: tight write() loop
// child = reader: tight read() loop
#define _GNU_SOURCE
#include <assert.h>
#include <errno.h>
#include <sched.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <time.h>
#include <unistd.h>
int main(void)
{
long wrsize = 70; // bytes per write()
long rdsize = 4096; // bytes per read()
int pfd[2];
char *buf;
pid_t pid;
int ret;
ret = pipe(pfd);
assert(!ret);
pid = fork();
assert(pid >= 0);
if (pid == 0) { /* reader */
close(pfd[1]);
buf = malloc(rdsize);
assert(buf);
for (;;) {
ssize_t n = read(pfd[0], buf, rdsize);
if (n < 0 && errno == EINTR)
continue;
if (n <= 0)
_exit(n < 0 ? 1 : 0);
}
}
close(pfd[0]); /* writer */
buf = malloc(wrsize);
assert(buf);
memset(buf, 'x', wrsize);
for (;;) {
ssize_t n = write(pfd[1], buf, wrsize);
if (n < 0 && errno == EINTR)
continue;
if (n != wrsize)
break;
}
kill(pid, SIGKILL);
wait(NULL);
return 0;
}
Fixes: fbe0fae601b7 ("MIPS: mobileye: Add EyeQ6H support")
Cc: stable@vger.kernel.org
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add config based on OpenWrt for EN751221 boards.
Of note: EcoNet bootloader has a 7.2MB kernel size limit so
ZBOOT is assumed to be needed in all cases.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
ECONET selects EARLY_PRINTK_8250, SERIAL_OF_PLATFORM, and SERIAL_8250
without ensuring their dependencies, EARLY_PRINTK and TTY are met. This
causes unmet dependencies:
WARNING: unmet direct dependencies detected for SERIAL_8250
Depends on [n]: TTY [=n] && HAS_IOMEM [=y] && !S390
Selected by [y]:
- ECONET [=y]
WARNING: unmet direct dependencies detected for EARLY_PRINTK_8250
Depends on [n]: EARLY_PRINTK [=n] && USE_GENERIC_EARLY_PRINTK_8250 [=y]
Selected by [y]:
- ECONET [=y]
WARNING: unmet direct dependencies detected for SERIAL_OF_PLATFORM
Depends on [n]: TTY [=n] && HAS_IOMEM [=y] && SERIAL_8250 [=y] && OF [=y]
Selected by [y]:
- ECONET [=y]
However, in the discussion of v1 of this patch, Arnd pointed out that these
selects don't belong here in the first place. [1]
Let's remove them to resolve the unmet dependencies.
These unmet dependencies were found by kconfirm, a static analysis tool for
Kconfig.
Fixes: 79ee1d20e37c ("mips: econet: Fix incorrect Kconfig dependencies")
Fixes: 35fb26f94dfa ("mips: Add EcoNet MIPS platform support")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Tested-by: Caleb James DeLisle <cjd@cjdns.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
|
|
The upcoming patch will support x86 APX eGPRs sampling by using the
reclaimed XMM register space to represent eGPRs in sample_regs_* fields.
To differentiate between XMM and eGPRs in sample_regs_* fields, an
additional argument, simd_enabled, is introduced to the
perf_reg_validate() helper. If simd_enabled is set to 1, it indicates
that eGPRs are represented in sample_regs_* fields for the x86 platform;
otherwise, XMM registers are represented.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260824082731.1013973-18-dapeng1.mi@linux.intel.com
|
|
Define default common __weak functions for perf_reg_value(),
perf_reg_validate(), perf_reg_abi() and perf_get_regs_user(). This helps
to eliminate the duplicated arch-specific definitions.
No function changes intended.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260824082731.1013973-5-dapeng1.mi@linux.intel.com
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- switch gpio code to use swnodes
- rework of TXX9 gpio code
- enable multi-vpe for econet
- cleanups and fixes
* tag 'mips_7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: dts: econet: Describe dual-VPE 34Kc processor
mips: econet: add multi-vpe capability to EN751221
MIPS: ptrace: Fix syscall skipping via PTRACE_SYSCALL
mips: remove dead select
MIPS: BCM47XX: Convert buttons to software nodes
ssb: gpio: Add and register software node for GPIO controller
bcma: gpio: Add and register software node for GPIO controller
MIPS: ip22-gio: Drop #include of <linux/mod_devicetable.h>
MIPS: TXX9: Clean up txx9_iocled_init()
MIPS: TXX9: Convert gpio_txx9 to dynamic GPIO base allocation
MIPS: TXX9: Drop GPIOLIB_LEGACY select
MIPS: TXX9: Use GPIO lookup table for iocled LEDs
MIPS: TXX9: Reduce TXX9_IOCLED_MAXLEDS to 3
MIPS: TXX9: rbtx4927: Use GPIO lookup table for TXx9 LEDs
MIPS: TXX9: rbtx4927: Use GPIO lookup table for SIO DTR
MIPS: TXX9: Remove txx9_7segled_*() forward declarations
MIPS: TXX9: Remove tx4938_spi_init() and txx9_spi_init()
MIPS: kernel: proc: Use two seq_putc() calls in show_cpuinfo()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm: drop "sub" prefix from various places" (Dev Jain)
page->folio conversion and a naming cleanup
- "mm/kasan: remove redundant initialization for kasan_flag_write_only"
(Igor Putko)
KASAN cleanup work
- "mm/filemap: reduce unnecessary xarray lookups" (Chi Zhiling)
Small speedup in the pagecaache read code
- "mm/percpu: Fix possible NOFS/NOIO reclaim recursion" (Kaitao Cheng)
Improve the vmalloc code - mainly the avoidance of GFP_KERNEL
allocations when the caller asked for GFP_NOFS or GFP_NOIO
- "mm/kmemleak: avoid soft lockup when scanning task stacks" (Breno
Leitao)
Avoid a soft lockup watchdog trigger from the kmemleak scanning code
in extreme situations
- "mm/page_owner: misc cleanups" (Ye Liu)
Cleanups to the page_owner code. For some reason lots of people have
been working on the page_owner code this cycle.
- "mm: convert to walk_page_range_vma() to eliminate find_vma()"
(Kefeng Wang)
Simplify and accelerate the page walking library function
- "mm/migrate: preparatory cleanups for batch copy and offload"
(Shivank Garg)
Cleanups in the migration code
- "mm/page_owner: add per-fd filter infrastructure for print_mode and
NUMA filtering" (Zhen Ni)
Per-fd filtering to page_owner in order to reduce the sometimes vast
amount of output it can produce
- "mm: Refactor bootmem gigantic hugepage allocation" (Muchun Song)
Fixes and preparatory cleanups around bootmem HugeTLB handling,
sparse initialization ordering, and related vmemmap setup
- "mm/zsmalloc: reduce lock contention in zs_free()" (Wenchao Hao)
Reduce lock contention in zs_free(), which dominates the unmap path
under memory pressure on Android (LMK kills) and on x86 servers
running zswap-heavy workloads.
Up to 1.83x improvement in microbenchmarking.
- "move alloc_tag.c file under mm/" (Suren Baghdasaryan)
- "samples/damon: handle damon_{start,stop}() failures" (SJ Park)
Fix improper handling of damon_start(), damon_stop(), and
damon_call() failures across DAMON sample modules to prevent
potential memory leaks, operation disruptions and use-after-free
bugs
- "mm/damon/sysfs: kobject_del() directories that users can
create/remove" (SJ Park)
Fix delayed sysfs directory removal under DEBUG_KOBJECT_RELEASE
causeing creation failures due to duplicate directory names by adding
missing kobject_del() calls before creating new directories
- "mm: cleanup clear_not_present_full_ptes()" (David Hildenbrand)
Clean up the core pte handling code
- "selftests/damon: misc fixes for test bugs" (Kunwu Chan)
Fix several bugs in the DAMON selftests
- "selftests/damon: fix memcg_path staging handling" (Cheng Nie)
Fix a bug in _damon_sysfs.py for damos_filter memcg_path setup, and
add a test case for it in sysfs.py.
- "selftests/damon: test kdamond refresh_ms" (Ruslan Valiyev)
Selftest coverage for DAMON's refresh_ms sysfs feature by updating
the test control module and verifying that scheme stats update
automatically without manual intervention
- "mm/damon: five misc fixups" (Akinobu Mita)
Miscellaneous DAMON fixups.
- "mm/damon/core: detect internal variation above max_nr_regions/2"
(Jiayuan Chen)
Fix DAMON's region splitting behavior when region counts exceed half
the maximum budget by dynamically scaling down the split fraction as
the limit approaches, preventing large regions from staying un-split,
and add corresponding KUnit test coverage
- "mm: preparatory patches for PMD level swap entries" (Usama Arif)
Refactor and clean up PMD softleaf helpers, call sites, and
architecture flags to lay the groundwork for a follow-up series that
introduces PMD page table swap entries
- "mm/damon: update, optimize, and clean up doc, tests, and code" (SJ
Park)
Update DAMON design and ABI documentation, expands unit and selftest
coverage, optimize damon_commit_target_regions(), and clean up
recently added sysfs interface code for better readability
- "mm/vmpressure: reduce CPU, memory and code overhead on cgroup v2"
(Usama Arif)
Optimize vmpressure() by skipping unnecessary work on cgroup v2 for
userspace event notifications and refactor v1-only eventfd handling
into mm/memcontrol-v1.c to reduce memory overhead and code complexity
- "selftests/mm: refactor pkey helpers and fix mmap error handling"
(Hongfu Li)
Refactor pkeys shared tracing and assertion helpers into a common
file, unify protection key selftests to use consistent diagnostic
logging and assertions, and enforce standardized MAP_FAILED return
checks for mmap() calls across the tests
- "mm/damon: optimize out nr_accesses_bp" (SJ Park)
Replace the error-prone, continuously updated nr_accesses_bp field in
damon_region with an on-demand moving sum function, reducing
structure memory overhead and avoiding state corruption bugs
- "Open HugeTLB allocation routine for more generic use" (Ackerley Tng)
Decouple HugeTLB folio allocation from VMA dependencies by
introducing hugetlb_alloc_folio(), enabling subsystems like
guest_memfd to allocate HugeTLB folios without standard VMA
reservations or pseudo-VMAs
- "mm/damon: provide pseudo moving sum probe_hits" (SJ Park)
Integrate DAMON's probe_hits attribute counter into the pseudo moving
sum infrastructure, enabling real-time, online monitoring without
waiting for full aggregation intervals
- "mm: Some cleanups for page allocator APIs" (Brendan Jackman)
Simplify and refactor the page allocator entry points and flags by
unifying allocation paths, adding internal alloc_flags arguments, and
eliminating redundant __ prefixed alloc_pages variants.
- "Fix incorrect access of hugetlb pte entries" (Dev Jain)
Enforce the consistent use of huge_ptep_get() instead of ptep_get()
for HugeTLB entries and fixes an unaligned address issue in arm64's
huge_ptep_get() implementation
- "mm/damon: validate all parameters in the core" (SJ Park)
Consolidate parameter validation into the DAMON core specifically
within damon_start() and damon_commit_ctx() to centralize error
checking, eliminate caller-side redundant checks and to improve
maintenance efficiency
- "tools/mm/page_owner_sort: fix filtering and cleanup issues" (Yichong
Chen)
Rename is_need() to filter_record() for clearer return semantics, fix
per-record allocation memory leaks and bound output copies in
search_pattern() to address an existing buffer issue
- "memcg: bail out reclaim when memcg is dying" (Jiayuan Chen)
Mitigate a system-wide stall which occurs when a cgroup is removed
while one of its memory control files is doing synchronous reclaim
- "mm/memory-failure: add panic option for unrecoverable pages" (Breno
Leitao)
Introduce an opt-in vm.panic_on_unrecoverable_memory_failure sysctl
that immediately panics the kernel on unrecoverable memory errors in
kernel-owned pages to preserve error context and prevent delayed,
silent data corruption
- "mm/damon: refactor damon_{start,stop,commit}() for simple error
handling" (SJ Park)
Refactor the DAMON core API functions to guarantee that all contexts
are fully stopped when damon_start(), damon_stop(), or damon_commit()
fail, eliminating the need for complex and error-prone caller-side
cleanup code
- "Keep tail page private zero at free and folio split" (Zi Yan)
Add checks to ensure tail_page->private is zero when freeing compound
or high-order pages and when promoting tail pages during large folio
splits. By validating these fields at free and split time, it allows
the removal of redundant private field clearing inside
prep_compound_tail()
- "mm: drop redundant lru_add_drain in anon folio reuse paths" (Barry
Song)
Eliminate redundant lru_add_drain() calls in
wp_can_reuse_anon_folio() and do_swap_page() to reduce LRU lock
contention and system overhead
By validating folio refcounts against the LRU cache before draining
and removing unnecessary drains in the swap path, it achieves up to a
30.5% reduction in drain calls during heavy swap workloads
- "mm: clean up folio LRU and swap declarations" (Jianyue Wu)
Reorganize folio LRU and swap code by relocating page-cluster state
to mm/swap_state.c, renaming mm/swap.c to mm/folio.c, and moving
MM-internal reclaim declarations into mm/internal.h.
- "userfaultfd: working set tracking for VM guest memory" (Kiryl
Shutsemau)
Add userfaultfd support for tracking the working set of VM guest
memory, so a VMM can identify hot pages and reclaim cold ones to
tiered or remote storage
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 2)" (David
Hildenbrand)
Remove the remaining pieces of CONFIG_HAVE_BOOTMEM_INFO_NODE,
performing some smaller cleanups around freeing of reserved vmemmap
pages on the way.
- "mm/damon: update probe hits for runtime parameter commits" (SJ Park)
Ensure that DAMON's probe_hits attribute counter is properly updated
when monitoring intervals are changed at runtime, matching the
behavior of nr_accesses. To achieve this, it refactors and renames
existing helper functions for shared use, applies the updates to
probe_hits, and handles edge cases in damon_probe_hits_mvsum() to
maintain measurement accuracy.
- "KSM: performance optimizations for rmap_walk_ksm" (xu xin)
Resolve a severe KSM reverse-mapping performance bottleneck where
thousands of split VMAs sharing a single anon_vma cause extended lock
contention.
By adding an interval-filtering check during the rmap walk, it
reduces worst-case anon_vma lock hold times from over 500ms down to
under 2ms, preventing application freezes and latency spikes under
memory pressure.
- "mm: split a couple of headers from internal.h" (Mike Rapoport)
Split declarations related to mm_init, memblock, vmalloc and sparse
into new headers
- "KSM: use linear_page_index in collect_procs_ksm()" (xu xin)
Apply the interval tree optimization from rmap_walk_ksm() to
collect_procs_ksm() to avoid iterating over non-matching VMAs during
KSM memory error handling.
It hoists loop-invariant address initialization and restricts the
anon_vma_interval_tree_foreach walk to a targeted page offset range,
reducing redundant checks and improving lookup efficiency.
- "selftests/mm: avoid false failures in hugetlb and KSM tests" (Sayali
Patil)
Fix issues in the hugetlb and KSM MM selftest categories that can
report failures when the prerequisites for the tests are not
satisfied
- "mm/damon: introduce data attributes only monitoring" (SJ Park)
Introduce attribute-weighted region management in DAMON, allowing
users to prioritize specific data attributes (such as page sizes or
cgroups) over or instead of access monitoring.
By assigning weights to attribute probes, DAMON can completely
disable access tracking and adjust monitoring regions based on
weighted probe-hit counters to optimize monitoring quality for
attribute-focused workloads.
- "mm/hmm: Add mmap lock-drop support for userfaultfd-backed mappings"
(Stanislav Kinsburskii)
Extend hmm_range_fault() to support userfaultfd-backed regions by
allowing the mmap lock to be dropped during fault handling via a new
hmm_range_fault_locked() helper.
By accepting a locked pointer and signaling retry status when lock
release occurs, it enables page fault resolution in userfaultfd
regions while preserving backward compatibility for existing callers.
- "mm: make VMA page offset handling more consistent" (Lorenzo Stoakes)
Clean up and standardize how vma->vm_pgoff is accessed and
manipulated across file-backed and anonymous mappings in the kernel
It introduces dedicated helper functions such as vma_start_pgoff(),
vma_end_pgoff(), vma_set_pgoff() and linear_page_delta() while
renaming rmap interval tree helpers to better reflect their
functionality.
These changes establish a cleaner foundation for future work that
will unify virtual page offset indexing for all anonymous and CoW'd
folios.
- "mm: handle device-private PMDs in walk callbacks" (Usama Arif)
Address kernel panics and state corruption caused by MM walk
callbacks reaching non-present device-private PMD swap entries
created during HMM migrations
It ensures that functions which acquire pmd_trans_huge_lock()
properly recognize device-private PMDs instead of assuming a present
THP or a standard migration entry.
- "mm/rmap: Refactor try_to_unmap_one" (Dev Jain)
Refactor try_to_unmap_one by modularizing Hugetlb,
anonymous-lazyfree, and anonymous-swapbacked logic into dedicated
functions, laying the structural groundwork for batched anonymous
large folio unmapping.
- "Docs/ABI/damon: sysfs ABI document fixes and additions" (Song Hu)
Fix typos and fills in missing entries in the DAMON sysfs ABI
document
- "dax/kmem: atomic whole-device hotplug via sysfs" (Gregory Price)
Introduce an atomic sysfs state attribute and supporting DAX/MM
infrastructure to prevent userland races when offlining and removing
entire memory regions
By adding an unplugged state alongside standard online modes, it
enables whole-device atomic hotplug control while preserving backward
compatibility.
- "mm: convert more vm_flags_t users to vma_flags_t" (Lorenzo Stoakes)
Continue transitioning the kernel from the deprecated vm_flags_t type
to vma_flags_t across core memory management infrastructure.
It replaces legacy type usage in core functions such as do_mmap(),
unmapped area allocation, mm->def_vma_flags, and VMA operations like
mlock, mprotect, and mremap.
- "Two small patches to clean up mm/mm_slot.h" (xu xin)
Refactor mm_slot.h by introducing mm_slot_remove() to unify duplicate
slot deletion sequences in khugepaged and KSM. It also adds code
documentation explaining why mm_slot_lookup and mm_slot_insert must
remain as preprocessor macros rather than static inline functions.
- "mm/damon/core: hide core-private struct fields" (SJ Park)
Clean up DAMON core structures by consistently marking internal-only
fields with private: comment tags to prevent improper direct access
from outer layers.
It enforces encapsulation across core structures including
damon_region, damon_target, and damon_ctx and updates DAMON_SYSFS to
interact through approved access APIs instead of exposing raw struct
members.
- "mm/damon: unurgent fixes for infinite loop, NULL de-ref and races"
(SJ Park)
Address potential infinite loops, NULL dereferences, and race
conditions identified in DAMON
It fixes an infinite loop triggered by extreme user configurations, a
NULL pointer dereference within unit tests and minor monitoring
accuracy degradation caused by subtle runtime races.
- "mm/page_alloc: fixes for free_pages_nolock() on RT/UP" (Brendan
Jackman)
Fix an NMI safety flaw in __free_frozen_pages() where freeing pages
on non-SMP or PREEMPT_RT kernels can bypass can_spin_trylock() checks
via non-PCP or isolated migration paths.
It also resolves potential kernel crashes and privilege escalation
risks triggered when BPF tracing runs in NMI context alongside memory
hotplug or large allocation frees.
- "mm/page_alloc: couple of followups for recent cleanups" (Brendan
Jackman)
Clean up and update page allocator nomenclature, documentation, and
debug assertions.
It aligns internal FPI_ flags with the public "nolock" naming
convention, removes outdated internal implementation details from
high-level page allocator comments, and eliminates obsolete
VM_BUG_ON() assertions in allocation paths.
- "mm/mseal: further cleanups" (Lorenzo Stoakes)
Refactor and simplify the mseal implementation by clarifying API
boundaries and removing unnecessary code complexity.
It replaces generic do_mseal() usage outside the syscall with a
dedicated mseal_mmap_page_zero() helper for MMAP_PAGE_ZERO,
eliminates mm_struct parameters to enforce that sealing applies only
to current->mm, and streamlines overall logic and comments with no
functional changes intended.
- "mm/vmscan: fix swappiness=max and clean up per-node proactive
reclaim" (Ridong Chen)
Resolve reclaim behavior bugs and clean up function parameters across
memory reclaim paths
It fixes swappiness=max in both standard reclaim and MGLRU so
unswappable anonymous memory no longer falls back to evicting page
cache, ensures reclaim_store() returns accurate error codes instead
of collapsing all failures into -EAGAIN, and removes the obsolete
gfp_mask parameter from __node_reclaim().
- "mm: mincore: misc cleanups" (Kefeng Wang)
Clean up and simplifies the mincore code. Most importantly, it
removes the historical special behavior that always reports VM_PFNMAP
pages as non-resident.
- "mm/huge_memory: drop dead split helper variants" (Kiryl Shutsemau)
Two trivial cleanups in the folio split API
- "mm/damon: fix uninitialized DAMOS field and kunit exec expectation
bugs" (SJ Park)
Resolve minor operational and testing bugs in DAMON identified by
Sashiko. It initializes the damos->last_applied field to prevent
occasional efficiency degradation and fixes invalid memory accesses
in DAMON KUnit tests during test failure handling.
- "cleanup for stable_page_flags()" (Jinjiang Tu)
Clean up and refactor stable_page_flags() used by /proc/kpageflags
without altering functionality.
It uses BIT_ULL() to prevent shift-overflow warnings on 64-bit flag
bits, converts folio-specific flag checks to standard folio_test_*()
helpers, and removes redundant CONFIG_PAGE_IDLE_FLAG handling.
- "Batch unmap of uffd-wp file folios" (Dev Jain)
Extend batched folio unmapping support to file folios within
userfaultfd write-protect (uffd-wp) VMAs by adding batching
capabilities to pte_install_uffd_wp_if_needed().
This removes special-case restrictions on uffd-wp VMAs in
try_to_unmap_one(), significantly simplifying the function's control
flow and complexity.
- "mm/early_ioremap: clarify and clean up early_ioremap_reset()"
(Sang-Heon Jeon)
Clarify and clean up the architecture-specific usage of
__late_set_fixmap() and __late_clear_fixmap() after
early_ioremap_reset()
It adds explicit documentation regarding when early_ioremap_reset()
must be called and removes redundant macro definitions and reset
calls in the RISC-V and ARM64 architectures.
- "mm: fix reclaim storms in defrag_mode" (Johannes Weiner)
Address severe performance regressions, swap storms, and spurious
OOMs caused by vm.defrag_mode=1 under high memory pressure in Meta
production
It updates the page allocator slowpath so non-movable allocation
requests actively trigger direct reclaim and direct compaction at
pageblock_order scale, allowing them to claim whole pageblocks rather
than spinning unproductively.
- "zram: lockmap tweaks" (Sebastian Siewior)
Optimize and fix lockdep tracking for zram devices by consolidating
per-entry lockmaps and isolate lock classes across multiple instances
This reduces memory overhead by replacing per-entry lockdep_map
instances with a single map per struct zram, and assigns a dynamic
lock_class_key to each instance to prevent false deadlock reports
when different zram devices are backed by distinct filesystems.
* tag 'mm-stable-2026-08-18-18-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (501 commits)
selftests/mm: thuge-gen: fix test_shmget() for PAGE_SIZE check
selftests/mm: unpoison pages in memory-failure teardown
mm/shmem: downgrade final i_blocks check in shmem_evict_inode() to pr_warn()
mm/khugepaged: replace mutex_lock/mutex_unlock usage with guard macro
mm/zsmalloc: fix release order of locks in zs_page_migrate()
Documentation: zram: remove sections numbering
ksm: stop iterating VMAs when ksm_test_exit returns true
mm: fold userfaultfd_rwp() to false without CONFIG_ARCH_HAS_PTE_PROTNONE
mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch()
zram: use a custom key for each zram object
zram: move lockmap to be per-zram instead per table
selftests/mm: fix gup_longterm EINVAL error message
mm: page_alloc: fix non-movable reclaim storm in defrag_mode
mm: page_alloc: move capture_control to the page allocator
mm: compaction: support non-movable compaction for pageblock requests
mm: page_alloc: __GFP_FS lockdep annotation for direct compaction
hugetlb: evaluate subpool free state while locked
mm/damon: remove trailing semicolons after function definitions
mm/damon/ops-common: prevent migration fallback to non-target nodes
mm/damon: update outdated comment about DAMOS filter handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, udf, isofs, and quota updates from Jan Kara:
- Remove deprecated quota code printing warnings about exceeded quota
directly to console
- Various udf & isofs hardening for handling of corrupted filesystems
- Fix a possible data loss in udf when converting files from inline to
out-of-line format
- Simplify EIO error handling in ext2 xattr code
* tag 'fs_for_v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix data loss when converting inline inodes to out of line
udf: Move udf_map_block() up
ext2: Simplify error handling of IO error when adding xattr
isofs: Drop support of directory entries straddling blocks
isofs: validate directory records consistently
quota: remove CONFIG_PRINT_QUOTA_WARNING code
udf: Fix i_lenExtents truncation on 32-bit kernels
isofs: release zisofs block pointer buffer head
udf: Fix bh leak for unallocated space entries
udf: bound lengthAllocDescs from unallocated space entry
UDF symlink pathComponent header OOB read
isofs: fix out-of-bounds page array access on empty zisofs block
udf: reject VAT indexes equal to the entry count
udf: Mark LVID buffer as uptodate before marking it dirty
udf: avoid recursive s_alloc_mutex deadlock when freeing AED blocks
udf: validate extent partition references in udf_current_aext()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"GPIO core:
- extend the gpio-regmap abstraction layer with more features
allowing users to override configuration setting, translate
register values and masks and enable/disable interrupts
- extend GPIO kunit tests with suites verifying probe ordering by
software node devlink support and software node hogs
- shrink GPIO kunit initialization code
- coding style updates (remove commas from sentinels where
applicable)
- with all users now converted treewide to using real firmware node
links for software node GPIO lookup: remove the deprecated
label-matching mechanism from from GPIO core
- drop redundant return value check of nonseekable_open() in
gpiolib-cdev
- use IRQ trigger helpers where applicable
Driver updates:
- refactor error paths and logging in gpio-nomadik
- use more modern interfaces for getting resources in gpio-rockchip,
gpio-bt8xx and gpio-pca9570
- add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
- drop unused FILONOFF macro from gpio-rcar
- extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
- only enable the gpio-rtd driver by default with ARCH_REALTEK=y to
avoid bloating the build
- refactor coding style in several drivers
- use correct endianess translation in gpio-pcf85x
- add wake-up interrupt support to gpio-mvebu
- apply initial value in direction output setter in gpio-by-pinctrl
Misc:
- replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h
which now exports all the deprecated APIs
- select GPIOLIB_LEGACY in Kconfig where required treewide
- use software nodes for gpio-keys in MFD drivers
Devicetree bindings:
- describe the realtek rtd1625 GPIO controller
- document new models for gpio-pca95xx and gpio-cadence
- document new property in gpio-rockchip"
* tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (61 commits)
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property
gpio: Use IRQ trigger mask helpers
gpio: allow COMPILE_TEST for IOPORT drivers
gpio: realtek: Add driver for Realtek DHC RTD1625 SoC
gpio: regmap: Add IRQ enable/disable helpers
gpio: regmap: Add set_config callback
gpio: regmap: Add value_xlate callback
gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback
gpio: regmap: Order kernel-doc descriptions with the actual appearance
gpio: regmap: Apply default resource callbacks for regmap IRQ chip
gpio: regmap: Provide default IRQ resource request and release callbacks
Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC"
gpib: gpio: replace linux/gpio.h inclusion
Input: matrix_keyboard - replace linux/gpio.h inclusion
phy: replace linux/gpio.h inclusions
pcmcia: replace linux/gpio.h inclusions
ASoC: replace linux/gpio.h inclusions
mfd: replace linux/gpio.h inclusions
sh: replace linux/gpio.h inclusions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Consolidate the VDSO datastore further and provide support for
mlock_all() and prefaulting.
- Provide 32-bit legacy time related functionality only if
CONFIG_COMPAT_32BIT_TIME is enabled. The config switch exists,
but architecture code still exposes the legacy functionality even
disabled.
Clean this up by adding the missing guards and validating at build
time that the VDSO is legacy free if disabled.
- Consolidate the VDSO related config options in core and drivers,
which removes some non-sensical dependencies and quite an amount of
#ifdeffery.
- Clean up the PAGE_SIZE definition maze
* tag 'timers-vdso-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
random: vDSO: Drop custom PAGE_SIZE definitions
LoongArch: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/timer-riscv: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/arm_arch_timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
clocksource/drivers/mips-gic-timer: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
MIPS: csrc-r4k: Remove CONFIG_GENERIC_GETTIMEOFDAY ifdeffery
vDSO: Make clockmode constants available without CONFIG_GENERIC_GETTIMEOFDAY
kbuild: Support generated asm-headers in subdirectories
vdso: Rename HAVE_GENERIC_VDSO to VDSO_DATASTORE
vdso: Drop HAVE_GENERIC_VDSO from architecture kconfig files
vdso: Automatically select HAVE_GENERIC_VDSO if necessary
MIPS: vdso: Stop using CONFIG_HAVE_GENERIC_VDSO
vdso: Remove the dependency on HAVE_GENERIC_VDSO from ARCH_HAS_VDSO_ARCH_DATA
futex: Remove dependency on HAVE_GENERIC_VDSO from FUTEX_ROBUST_UNLOCK
vdso/gettimeofday: Verify COMPAT_32BIT_TIME interactions
sparc: vdso: Respect COMPAT_32BIT_TIME
MIPS: VDSO: Respect COMPAT_32BIT_TIME
powerpc/vdso: Respect COMPAT_32BIT_TIME
ARM: VDSO: Respect COMPAT_32BIT_TIME
arm64: vdso32: Respect COMPAT_32BIT_TIME
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull treewide timer related cleanups from Thomas Gleixner:
- Remove the leftover CLOCK_TICK_RATE which has been scheduled for
removal more than a decade ago along with some now empty asm/timex.h
files.
- Consolidate delay timer calibration
The construct of having a define in a header requires that
architectures provided asm/timex.h for no reason. Also the function
name for reading the delay timer is confusing at best.
Use a config switch to enable that functionality and rename the
function to delay_read_timer() to make the purpose clear.
This removes some more now empty asm/timex.h files as well.
* tag 'timers-cleanups-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
calibrate: Rework delay timer calibration
treewide: Remove CLOCK_TICK_RATE
x86: Use PIT_TICK_RATE instead of CLOCK_TICK_RATE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic entry code updates from Thomas Gleixner:
- Make syscall user dispatching configurable
Not all architectures can makes use of syscall user dispatching.
Allow them to disable the feature completely.
- Consolidate stack randomization for the generic entry code and the
architectures using it.
Stack randomization on syscall entry was sprinkled throughout the
architecture specific low level entry code and in some cases at the
wrong points, e.g. before establishing state, which violates the
non-instrumentable constraints of that code.
Clean this up by integrating stack randomization into the generic
entry code helpers so that it is invoked at the earliest possible
point right after establishing state and converting all generic entry
code using architecture over.
- Clean up the syscall number handling in the generic entry code. It
works correctly for architectures which have a separate return value
storage in pt_regs, but fails to distinguish the case where user
space handed in -1 as syscall number from the case where the entry
code rejects it by returning -1 to the callers. Aside of that the
return value functionality of those interfaces is not really
intuitive.
Fix this by separating the decision to reject a syscall (user
dispatch, ptrace, seccomp ...) from the potential modification of the
syscall number through these mechanisms.
This solves most of the problems for architectures which do not have
a separate return value storage in pt_regs except for the case where
a tracepoint has a BPF script or a probe attached which overwrite
both the syscall number and the return value. But that's a problem
which cannot be solved in the generic code, that only can be
addressed by separating the storage model in the affected
architectures.
* tag 'core-entry-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
entry, treewide: Make syscall_enter_from_user_mode[_work]() indicate syscall execution
entry: Make return type of syscall_trace_enter() bool
entry: Rework trace_syscall_enter()
entry: Rework syscall_audit_enter()
syscall_user_dispatch: Introduce ARCH_SUPPORTS_SYSCALL_USER_DISPATCH
entry: Fix seccomp bypass after ptrace with TSYNC
x86/entry: Simplify the syscall number logic
x86/entry: Get rid of the sys_ni_syscall() indirection
x86/entry: Make syscall functions static
ptrace, treewide: Rename ptrace_report_syscall_entry() to ptrace_report_syscall_permit_entry()
seccomp, treewide: Rename and convert __secure_computing() to return boolean
entry: Use syscall number instead of rereading it
entry: Remove syscall_enter_from_user_mode()
x86/syscall: Use [syscall_]enter_from_user_mode_randomize_stack()
s390/syscall: Use enter_from_user_mode_randomize_stack()
riscv/syscall: Use syscall_enter_from_user_mode_randomize_stack()
powerpc/syscall: Use syscall_enter_from_user_mode_randomize_stack()
loongarch/syscall: Use syscall_enter_from_user_mode_randomize_stack()
entry: Provide [syscall_]enter_from_user_mode_randomize_stack()
randomize_kstack: Provide add_random_kstack_offset_irqsoff()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Futexes:
- Use runtime constants for futex_hash computation (K Prateek Nayak,
Peter Zijlstra)
- Optimise the size check get_futex_key() (Sebastian Andrzej Siewior)
- Avoid private hash use-after-free on final put (Felix Hoffmann)
- Tell kmemleak we're not leaking __futex_queues (Peter Zijlstra)
Rust integration updates:
- Implement refcounted interrupt disable and SpinLockIrq for Rust
(Boqun Feng, Heiko Carstens, Joel Fernandes, Lyude Paul)
- Rust sync: add helpers for mb, dma_mb and friends; add generic
memory barriers and use LKMM atomics instead of Rust atomics in the
revocable code (Gary Guo)
- Add abstraction and integrate synchronize_rcu() (Philipp Stanner)
Lock debugging:
- Add qspinlock contended_release tracepoint (Dmitry Ilvokhin, Peter
Zijlstra)
- Enable the printing of held locks of remote running tasks and print
task CPU (Ingo Molnar)
- percpu-rwsem: Annotate intentional data race in readers_active_check()
(Sun Shaojie)
Misc fixes and updates by Boqun Feng, Peter Zijlstra, Fangrui Song,
Naveen Kumar Chaudhary and Thomas Huth"
* tag 'locking-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
rust: sync: Introduce SpinLockIrq::lock_with() and friends
rust: sync: Add SpinLockIrq
rust: sync: Use super::* in spinlock.rs
rust: helper: Add spin_{un,}lock_irq_{enable,disable}() helpers
rust: Introduce interrupt module
s390/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
arm64: sched/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
preempt: Introduce HAS_SEPARATE_PREEMPT_RESCHED_BITS
sched: Avoid signed comparison of preempt_count() in __cant_migrate()
sched: Remove the unused preempt_offset parameter of __cant_sleep()
locking: Switch to _irq_{disable,enable}() variants in cleanup guards
irq: Add KUnit test for refcounted interrupt enable/disable
irq,spin_lock: Add counted interrupt disabling/enabling
openrisc: Include <linux/cpumask.h> in smp.h
preempt: Introduce __preempt_count_{sub,add}_return()
preempt: Introduce HARDIRQ_DISABLE_BITS
preempt: Track NMI nesting to separate per-CPU counter
futex: Tell kmemleak we're not leaking __futex_queues
x86/paravirt: Trace contended_release on unlock
tracing/lock: Use TRACE_EVENT_FN() for contended_release
...
|
|
Right now if some LSM such as Smack denies an AF_UNIX socket peer to
receive an SCM_RIGHTS fd, the SCM_RIGHTS fd array will be cut short at
that point, and MSG_CTRUNC is set on return of recvmsg(). This is
highly problematic behaviour, because it leaves the receiver
wondering what happened. As per man page MSG_CTRUNC is supposed to
indicate that the control buffer was sized too short, but suddenly
a permission error might result in the exact same flag being set.
Moreover, the receiver has no chance to determine how many fds got
originally sent and how many were suppressed.[1]
Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more useful
handling of LSM denials when receiving SCM_RIGHTS messages: instead of
truncating the message at the first blocked fd, keep every fd slot
and store the LSM errno in the blocked slot. The socket option is
inherited by the child accept() socket if set on the listen() socket.
[1]: https://github.com/uapi-group/kernel-features#useful-handling-of-lsm-denials-on-scm_rights
Reviewed-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260813162818.149248-4-jkoolstra@xs4all.nl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that there is a definition of VDSO_CLOCKMODE_R4K even if no
vDSO is built, the ugly ifdeffery can be removed.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260724-vdso-arch-clockmodes-v4-3-ddbe447be860@linutronix.de
|
|
The contended_release tracepoint needs to hook queued_spin_unlock(), but
architectures with a custom unlock define queued_spin_unlock() directly,
leaving no single generic place to add the tracing.
Introduce queued_spin_release() as the arch-overridable release
primitive and make queued_spin_unlock() a generic wrapper around it.
An architecture that only customizes the release can then override
queued_spin_release() and inherit the generic wrapper.
Rename the MIPS override to queued_spin_release() accordingly. x86
paravirt overrides queued_spin_unlock() directly and is left unchanged.
No functional change intended.
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/b8daabae6469ad72cc784a911f6cc43a6d45df3a.1785778551.git.d@ilvokhin.com
|
|
The core do_mmap() function accepts a vm_flags_t parameter which it then
manipulates before passing to mmap_region() to do the heavy lifting of the
memory mapping.
Update do_mmap() to instead accept a vma_flags_t parameter, and adjust all
the logic within do_mmap() to manipulate this instead.
This is as part of the ongoing effort to convert VMA flags from a system
word size to a bitmap type which allows us to unrestrict the number of VMA
flags, as well as gain control over how VMA flag manipulation occurs.
We do not cascade these changes to all functions which accept vm_flags_t,
but rather use vma_flags_to_legacy() where necessary, specifically
deferring converting calc_vm_prot_bits(), calc_vm_flag_bits() and
__get_unmapped_area() to vma_flags_t.
Also utilise the new vma_flags_can_grow() predicate which correctly
handles the case of architectures without upward growing stacks.
As part of this change, introduce VMA_SHADOW_STACK so we can correctly
handle the case of the shadow stack not being defined.
No functional change intended.
Link: https://lore.kernel.org/20260711-b4-vma-flags-mm-v2-2-0fa2357d5431@kernel.org
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A possible bug was found in investigate_read_descriptor() and a fix was
proposed. Since this is an orphan driver for hardware that is old,
removing the driver was suggested instead. This patch removes the driver.
Jakub: clean up the Kconfig and platform configs
Link: https://lore.kernel.org/netdev/2026080158-next-diligent-b4ce@gregkh
Signed-off-by: Pablo Vallespín Aranguren <pablopva014@gmail.com>
Link: https://patch.msgid.link/am48DR5FC-xTY3-D@ThinkPad-P15
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 34Kc processor has two VPEs (threads) and the interrupt controller
on the EN751221 re-routes (in hardware) the software interrupt pins
zero and one to numbers 7 and 8 in the flat VEIC interrupt domain.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
EN751221 is a 34Kc so it has two VPEs (threads) but MIPS_SMP_MT
requires VEIC to be enabled in the interrupt controller, which only
became supported in
commit 2ee2a685ee83 ("irqchip/econet-en751221: Support MIPS 34Kc VEIC mode")
Register SMP_MT on startup and override init_secondary with CPU
interrupt unmasking as required by the EN751221 VEIC intc hardware.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
If tracer wanted to skip a syscall return value was always
overwritten with -ENOSYS. Fix this by checking against original
syscall number and only return -ENOSYS, if it is negative.
Fixes: b6318a903d06 ("MIPS/ptrace: Pick up ptrace/seccomp changed syscalls")
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
'select' does not work on config options in a 'choice', so the current
'select CPU_BIG_ENDIAN' does nothing (dead code).
However, ECONET already also selects SYS_SUPPORTS_BIG_ENDIAN so this
means that CPU_BIG_ENDIAN will always be set.
Let's remove the unnecessary 'select CPU_BIG_ENDIAN'.
This dead select was found by kconfirm, a static analysis tool for
Kconfig.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
CONFIG_PRINT_QUOTA_WARNING was marked as BROKEN in 2023 by 36d532d713db
("quota: mark PRINT_QUOTA_WARNING as BROKEN").
The code is apparently unused and uninteresting, so remove it all, incl.
the abuse of TTY.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.com>
Cc: Yangtao Li <frank.li@vivo.com>
Link: https://patch.msgid.link/20260722060155.1111519-1-jirislaby@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Wire up the fchroot() system call as number 472 on (nearly) all
architectures and sync the mirrored copies of the syscall tables and
the asm-generic unistd.h under tools/.
Link: https://patch.msgid.link/20260724-work-failfs-v2-5-485dabbae185@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into gpio/for-next
gpio: legacy interface cleanups for 7.3
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
|
|
linux/gpio.h should no longer be used, convert these instead to
either linux/gpio/consumer.h or linux/gpio/legacy.h as needed.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Convert the legacy gpio-keys platform device on BCM47XX boards to
use software nodes/properties. This allows us to describe the GPIO
keys and their GPIO bindings using software nodes, so that support
for platform data can eventually be removed from the gpio-keys
driver.
Detect the active bus type (BCMA or SSB) and reference the
corresponding GPIO controller's software node (bcma_gpio_swnode or
ssb_gpio_swnode) in the button properties.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
That header doesn't use any device id provided by
<linux/mod_devicetable.h>. Also the users of <asm/gio_device.h> (i.e.
arch/mips/sgi-ip22/ip22-gio.c and drivers/video/console/newport_con.c)
don't use any of them and they compile fine in a mips allmodconfig.
So drop the unused include that only yields unnecessary recompilations
when a device id struct changes.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The sole caller already uses dynamic GPIO base allocation, so drop
support for static allocation.
While at it, drop the no longer used "lowactive" parameter.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Static allocation of GPIO base is deprecated, use dynamic allocation.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
TXx has been converted away from the old-style gpiolib interfaces.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Convert iocled LED description from legacy GPIO numbers to GPIO
descriptors using a GPIO lookup table.
For now, just ignore the "lowactive" parameter, and force
GPIO_ACTIVE_LOW, as that is what the sole caller wants.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The number of available GPIOs and LEDs on the TXx9 IOC FPGA depends on
the platform. Since commit 455481fc9a807798 ("MIPS: Remove TX39XX
support"), the only remaining platform (rbtx4927) supports just three.
Hence reduce the maximum number, to reduce allocation size.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Convert TXx9 LED description from legacy GPIO numbers to GPIO
descriptors using a GPIO lookup table.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Convert SIO DTR handling from legacy GPIO calls to GPIO descriptors
using a GPIO lookup table.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The actual implementation was removed in commit 5a8df9281b052ff3 ("MIPS:
TXX9: Remove rbtx4939 board support").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The last user of tx4938_spi_init() was removed in commit
21d638ef9483d8cf ("MIPS: TXX9: Remove rbtx4938 board support").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Single line breaks should occasionally be put into a sequence.
Thus use the corresponding function “seq_putc”.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|