| Age | Commit message (Collapse) | Author |
|---|
|
# Conflicts:
# net/ceph/osd_client.c
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for reported problems and
regressions. Include in here are:
- xhci driver fixes
- cdns3 driver fixes
- usb gadget driver fixes for syzbot found problems
- typec driver fixes for broken hardware and other bugs found
- kernel data leaks in mdc800 driver
- usb storage driver fixes
- other small USB driver fixes
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: qcom-pmic-typec: drain cc_debounce_dwork if port_start() fails
usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop
usb: gadget: fix null pointer dereference in usb_put_function_instance()
usb: typec: qcom-pmic: cancel reset_work on stop
usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers()
usb: f_mass_storage: Bump local buffer size in fsg_common_create_luns()
usb: storage: realtek_cr: fix use-after-free on disconnect
usb: cdnsp: fix wakeup from S3 after controller context loss
usb-storage: ene_ub6250: fix race between scan work and probe
USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl()
usb: gadget: f_midi: initialize work in f_midi_alloc()
usb: gadget: f_midi2: fix use-after-free in string attribute show path
usb: typec: tipd: Fix Thunderbolt altmode VDOs for cd321x
usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs
usb: typec: hd3ss3220: track VBUS enable state per consumer
usb: dwc3: clear forceRM when issuing EndTransfer
usb: dwc3: google: Initialise probe properties with DWC3_DEFAULT_PROPERTIES
usb: typec: mux: avoid duplicated mux switches
usb: typec: mux: Fix typec_switch_match()
usb: image: mdc800: change kmalloc() to kzalloc()
...
|
|
GadgetFS passes an excessively large user input len to kmalloc and kmalloc
gives a WARN (see below for details). Suppress it by passing __GFP_NOWARN
to kmalloc used by both ep_write_iter() and ep_read_iter(). Follow the
same method as commit 4f2629ea67e72 ("USB: usbfs: Don't WARN about
excessively large memory allocations").
kmalloc is used to allocate physically contiguous memory for kernel
allocations. For requests larger than KMALLOC_MAX_CACHE_SIZE, kmalloc
uses the page allocator and can only support up to KMALLOC_MAX_SIZE. For
request sizes bigger than KMALLOC_MAX_SIZE, the page allocator can emit a
WARN because kmalloc allocates an order greater than MAX_PAGE_ORDER.
Link: https://lore.kernel.org/DKTTMAS94IMH.2C6ERY0ZIVWVZ@nvidia.com
Fixes: b3c466ce5129 ("page allocator: do not sanity check order in the fast path")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: syzbot+805630f1453e490427fa@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6a820ebc.9ebadd4d.20b15e.001b.GAE@google.com/
Tested-by: syzbot+805630f1453e490427fa@syzkaller.appspotmail.com
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
|
|
Add support for the Quectel RG660QB 5G module (USB ID 2c7c:013d).
The interface layout is the same as the RG650V:
If 0: DIAG ff/ff/30, 2 endpoints
If 1: NMEA ff/00/00, 2 endpoints
If 2: AT ff/00/00, 3 endpoints
If 3: Modem ff/00/00, 3 endpoints
If 4: QMI ff/ff/ff, 3 endpoints
Match the serial interfaces on class/subclass/protocol so that the QMI
interface is left to qmi_wwan.
# lsusb -v -d 2c7c:013d
Bus 004 Device 002: ID 2c7c:013d Quectel Wireless Solutions Co., Ltd. RG660QB-EU
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x2c7c Quectel Wireless Solutions Co., Ltd.
idProduct 0x013d
bcdDevice 6.06
iManufacturer 1 Quectel
iProduct 2 RG660QB-EU
iSerial 3 f50119d0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0105
bNumInterfaces 5
bConfigurationValue 1
iConfiguration 4 DIAG_SER_RMNET
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 896mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 48
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 6 CDEV Serial
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 6 CDEV Serial
** UNRECOGNIZED: 05 24 00 10 01
** UNRECOGNIZED: 05 24 01 00 00
** UNRECOGNIZED: 04 24 02 02
** UNRECOGNIZED: 05 24 06 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 7 RmNet
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 9
bMaxBurst 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 6
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 2
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x0023
bNumDeviceCaps 2
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000f
Device can operate at Low Speed (1Mbps)
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 0 micro seconds
bU2DevExitLat 0 micro seconds
SuperSpeedPlus USB Device Capability:
bLength 20
bDescriptorType 16
bDevCapabilityType 10
bmAttributes 0x00000001
Sublink Speed Attribute count 1
Sublink Speed ID count 0
wFunctionalitySupport 0x1100
bmSublinkSpeedAttr[0] 0x000a4030
Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus
bmSublinkSpeedAttr[1] 0x000a40b0
Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus
Device Status: 0x0000
(Bus Powered)
Tested with an early sample of the module on a Quectel 5G EVB connected
over USB 3 to a Raspberry Pi 5.
Assisted-by: LLM
Signed-off-by: Sebastian Sjoholm <sebastian.sjoholm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The Compal EXM-G1x is a Qualcomm SDX12-based LTE modem. Add support for
its vendor-specific serial interfaces with protocols 0x30, 0x40, and
0x60.
Relevant output from usb-devices:
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=04b7 ProdID=8217 Rev=05.04
S: Manufacturer=COMPAL
S: Product=EXM-G1x
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
Tested on a Compal EXM-G1x modem.
Assisted-by: Codex:GPT-5
Signed-off-by: Ian Lin <jisayme@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add support for SIMCom SIM8260C (1e0e:902b).
T: Bus=08 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=1e0e ProdID=902b Rev= 5.04
S: Manufacturer=SIMCOM
S: Product=SDXLEMUR-LITE-MTP _SN:120696AB
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=896mA
A: FirstIf#= 5 IfCount= 3 Cls=01(audio) Sub=00 Prot=20
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan_simcom
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio
I:* If#= 6 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
I: If#= 6 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
E: Ad=05(O) Atr=0d(Isoc) MxPS= 34 Ivl=1ms
I:* If#= 7 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=20 Driver=(none)
I: If#= 7 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=(none)
E: Ad=89(I) Atr=0d(Isoc) MxPS= 34 Ivl=1ms
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add Quectel EG060W with product ID 0x6004.
The three vendor-specific interfaces are DIAG, NMEA and AT; the CDC-NCM
data interfaces are handled by the cdc_ncm driver.
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=6004 Rev= 3.18
S: Manufacturer=Quectel
S: Product=EG060W-EAAA
S: SerialNumber=123456789ABCD
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr= 2mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0d Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver=cdc_ncm
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
speedtch_upload_firmware() allocates a temporary buffer used to feed the
firmware to the device.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260830-usb-v1-3-aa349c302246@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cxacru_fw() allocates a temporary buffer used to feed the firmware to the
device and cxacru_bind() allocates the transfer buffers for the command
URBs.
These buffers can be allocated with kmalloc() as there's nothing special
about them to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260830-usb-v1-2-aa349c302246@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Back in the 2.6.xx days, it was possible to for low-level drivers to set
the shost lock pointer. That is why there is a default lock and a
pointer to the shost lock.
However, support for this has long been removed, so drop
Scsi_Host.default_lock and make Scsi_Host.host_lock as the actual lock.
Getting the address of embedded host_lock structure just requires adding
a fixed offset value to the shost pointer. However, getting the value of
the host_lock pointer requires loading from a fixed offset to the shost
pointer. The latter should be very slightly slower, which is relevant as
this lock is used a lot throughout the core code and drivers.
Signed-off-by: John Garry <john.garry@linux.dev>
Acked-by: Damien Le Moal <dlemoal@kernel.org> # ata parts
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260831095821.3486994-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
cc_debounce_dwork can be queued before port_start() fails:
tcpm_register_port() runs first, and its state machine may invoke
set_cc() or start_toggling() from the TCPM worker. The error path then
calls tcpm_unregister_port(), whose worker flush may queue the delayed
work before devres frees pmic_typec_port.
Disable and drain the delayed work directly at port_start()'s error
exit. Do not use port_stop() for this path: its IRQs use IRQF_NO_AUTOEN
and are enabled only after a successful port_start().
This issue was found by an in-house static analysis tool.
Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Cc: stable <stable@kernel.org> # v6.10+
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260820135307.153773-3-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cc_debounce_dwork is queued from the set_cc() and start_toggling()
callbacks, which run from TCPM's kthread worker. port_stop() returns
before tcpm_unregister_port() destroys that worker. Flushing the worker
during unregister may therefore run a callback which queues the delayed
work after port_stop() has returned.
The delayed work can then run after devres has freed pmic_typec_port.
Use disable_delayed_work_sync() in port_stop() to cancel a pending
instance and prevent the TCPM callbacks from queueing another one.
This issue was found by an in-house static analysis tool.
Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Cc: stable <stable@kernel.org> # v6.10+
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260820135307.153773-2-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_put_function_instance() attempts to dereference fd inside fi struct
to get mod in uvc_alloc_inst() error path. However, fd is not allocated
until later in try_get_usb_function_instance() after allocating fi in
uvc_alloc_inst() and thus guranteed to be null in error path. Fix this
by adding a null check for fi->fd that returns if fd is null.
Reported-by: syzbot+fd6ef980cf1c722be639@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fd6ef980cf1c722be639
Fixes: 0062f6e56f70 ("usb: gadget: add a forward pointer from usb_function to its "instance"")
Cc: stable <stable@kernel.org>
Signed-off-by: Jeffin Philip <jeffinphilip14@gmail.com>
Link: https://patch.msgid.link/20260816061712.15547-1-jeffinphilip14@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pdphy_stop() disables IRQs but leaves reset_work pending. If the IRQ
handler schedules it just before disable_irq(), the work runs after
remove() frees the struct via devm.
Call cancel_work_sync() after disabling IRQs to close the window.
This issue was found by an in-house static analysis tool.
Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260819161448.76597-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fsg_common_set_num_buffers()
Previously fsg_num_buffers_validate() was removed as it was not
necessary due to Kconfig setting the limits for n from 2 to 256 with
default as 2. However, setting the page content in such a way that
kstrtou8() reflects n value as either 0 or 1 bypasses these
restrictions leading to a null pointer dereference if n is 0. Fix
this by adding a check for n < 2 and returning -EINVAL if n is
either 0 or 1 consistent with Kconfig logic.
Reported-by: syzbot+791be35f1fbcc85d06d7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=791be35f1fbcc85d06d7
Fixes: fe5a6c48fd95 ("usb: gadget: storage: get rid of fsg_num_buffers_validate()")
Cc: stable <stable@kernel.org>
Signed-off-by: Jeffin Philip <jeffinphilip14@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260818035904.10324-1-jeffinphilip14@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
GCC (Debian 14.2.0-19) is not happy about the buffer size:
drivers/usb/gadget/function/f_mass_storage.c:2970:48: error: ‘%d’ directive output may be truncated writing between 1 and 9 bytes into a region of size 5 [-Werror=format-truncation=]
Bump the size to get it enough for all possible values.
Note, although cfg->nluns is limited to FSG_MAX_LUNS (16), the compiler
doesn't realize this and complains about the buffer size.
Also note, the existing comment is wrong as size 8 for the whole buffer
doesn't cover 100 mil numbers, hence drop it altogether.
Fixes: b27c08c953e9 ("usb: gadget: f_mass_storage: create lun creation helpers for use in fsg_common_init")
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260817161239.1448582-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
realtek_cr_destructor() calls timer_delete() before the chip containing
the timer is freed. The timer callback may still be running and can
rearm itself, resulting in a use-after-free.
Use timer_shutdown_sync() to wait for the callback and prevent further
rearming. Do this unconditionally because ss_en may be changed after
the timer is armed.
Move timer_setup() into init_realtek_cr() so the timer is initialized
before any failure path can invoke the destructor.
Found by static analysis.
Fixes: e931830bb877 ("Realtek cr: Add autosuspend function.")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260727123414.44700-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
CDNSP controller may lose its runtime register programming across S3
suspend/resume, depending on SoC power domain configuration. After
resume the operational and interrupter registers may contain reset
values, which prevents the gadget side from recovering correctly and
breaks wakeup from S3.
Fix this by detecting whether the controller lost its register context
after resume and handling both cases:
- If context was lost (CFG_3XPORT_U1_PIPE_CLK_GATE_EN set or power
lost): reset the controller and reprogram the state required for
normal operation, including the command ring, DCBAA pointer, doorbell
base, event ring, ERST base/size and event ring dequeue pointer.
- If context was retained: restart the controller directly without
reprogramming registers. Issue a wakeup if the link was in U3 before
suspend.
Move the basic controller register programming out of the one-time memory
initialization path and make it reusable from the resume path. Also
separate ring allocation from ring initialization so that rings can be
reinitialized without reallocating DMA memory.
Always perform the full suspend sequence regardless of the current link
state. Previously, if the device was already in U3, the suspend callback
returned early without stopping the controller, which could lead to
commands being issued on a disabled slot during resume.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260820-suspend_resume_fix-v3-1-5a713098b977@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ene_ub6250_probe() calls usb_stor_probe2(), which starts the usb-storage
infrastructure and schedules the delayed scan work. The driver then
calls ene_get_card_type(), which sends an ENE command through
ene_send_scsi_cmd() and the usb-storage bulk transfer helpers.
Both the delayed scan work, through usb_stor_Bulk_max_lun(), and
ene_get_card_type() use us->current_urb. The scan work serializes this
access with us->dev_mutex, but the ENE card-type probe does not. If the
scan work runs while ene_get_card_type() is still using us->current_urb,
usb_submit_urb() warns that the URB is already active.
Serialize ene_get_card_type() with us->dev_mutex, matching the locking
used by the scan path.
Reported-by: syzbot+22ea20ef3afb6785b122@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Closes: https://syzkaller.appspot.com/bug?extid=22ea20ef3afb6785b122
Assisted-by: Qwen:Qwen3.6
Signed-off-by: Liu Qi <liuqi@longcheer.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260821090416.1247127-1-liuqi@longcheer.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gadget_dev_ioctl() reads dev->gadget before acquiring dev->lock, but
dev->state is checked after acquiring the lock. Therefore a concurrent
bind can change the device state between these operations, which can
leave ioctl with a stale NULL gadget pointer and causing a NULL pointer
dereference at gadget->ops->ioctl.
Read dev->gadget while holding dev->lock so that the gadget pointer
and device state are sampled consistently.
Cc: stable <stable@kernel.org>
Reported-by: Eulgyu Kim <eulgyukim@snu.ac.kr>
Link: https://lore.kernel.org/all/20260824113510.1141236-1-jjy600901@snu.ac.kr/
Reported-by: Jaeyoung Chung <jjy600901@snu.ac.kr>
Link: https://lore.kernel.org/all/20260824113510.1141236-1-jjy600901@snu.ac.kr/
Signed-off-by: Lovekesh Solanki <lovekeshsolanki00@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260825171343.459630-1-lovekeshsolanki00@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
f_midi_alloc initializes free_ref to 1 and it can only be incremented
when a sound card is registered via f_midi_register_card().
f_midi_register_card() is only called in f_midi_bind() which actually
performs INIT_WORK. If f_midi_bind() is never run, work is not
initialized and the if condition in f_midi_free becomes true,
this results in a warning later in __flush_work as work->func = 0.
Fix this by moving INIT_WORK from f_midi_bind() to f_midi_alloc().
Reported-by: syzbot+d5fa3d224505c8610702@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d5fa3d224505c8610702
Fixes: 8653d71ce376 ("usb/gadget: f_midi: Replace tasklet with work")
Cc: stable <stable@kernel.org>
Signed-off-by: Jeffin Philip <jeffinphilip14@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260815054006.102325-1-jeffinphilip14@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
f_midi2_opts_str_show() takes the string lock internally, but its
callers dereference the opts->info.<field> pointer before calling it,
outside the lock. This races with f_midi2_opts_str_store(), which
frees the old string under opts->lock when the attribute is written
concurrently, the show path can read a pointer that gets freed
before the lock inside str_show() is even taken.
Change f_midi2_opts_str_show() to take a pointer to the string field,
matching the existing pattern in f_midi2_opts_str_store(), and
dereference it only after the lock is held. Update all three callers
(iface_name, block name, and the EP string option macro) accordingly.
Reported-by: syzbot+2280f1cca5e6b0c353e4@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Closes: https://syzkaller.appspot.com/bug?extid=2280f1cca5e6b0c353e4
Signed-off-by: Ivy Lopez <skunkolee@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260816005434.34018-1-skunkolee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Intel VID status register is actually 9 bytes long and doesn't
contain the raw VDOs but only the upper 16bits for device mode and enter
mode. Shift those two fields into place and reconstruct the cable
discover mode VDO from the data status register instead since it's not
directly accessible. With this fixed now the correct VDOs are forwarded
to the PHY and the to-be-submitted Thunderbolt/USB4 native host interface
so that the right mode can be negotiated and the link actually comes up.
Link: https://www.ti.com/lit/ug/slvubh2b/slvubh2b.pdf
Fixes: 0b31c978935f ("usb: typec: tipd: Read USB4, Thunderbolt and DisplayPort status for cd321x")
Fixes: 82432bbfb9e8 ("usb: typec: tipd: Handle mode transitions for CD321x")
Cc: stable <stable@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Tested-by: Rafay <ahmedrafay888@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260813-b4-tipd-vdo-fix-v1-1-70317f2cd554@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A null-pointer dereference occurs in f_midi2_free_ep_reqs() when attempting
to clean up an endpoint that was never initialized.
When configuring the MIDI 2.0 gadget via configfs and setting the block
direction to SNDRV_UMP_DIR_INPUT, the initialization of the midi1_ep_out
endpoint is explicitly skipped during the gadget bind phase
(f_midi2_bind()). As a result, the usb_ep->card field remains NULL.
Later, when the host sets the alternate setting, f_midi2_set_alt()
unconditionally stops both the IN and OUT endpoints by calling
f_midi2_stop_eps(), which in turn calls f_midi2_free_ep_reqs() for both
endpoints. When f_midi2_free_ep_reqs() is called for the uninitialized
midi1_ep_out, it attempts to dereference usb_ep->card to determine the
number of requests to free, leading to a crash.
Fix this by using usb_ep->num_reqs instead of usb_ep->card->info.num_reqs
in f_midi2_free_ep_reqs(). usb_ep->num_reqs is correctly set during
f_midi2_init_ep() and remains 0 if the endpoint was never initialized,
safely avoiding the loop. For consistency, apply the same change to
f_midi2_alloc_ep_reqs().
Oops: general protection fault, probably for non-canonical address
0xdffffc00000000ee: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000770-0x0000000000000777]
...
RIP: 0010:f_midi2_free_ep_reqs drivers/usb/gadget/function/f_midi2.c:1166
[inline]
RIP: 0010:f_midi2_stop_eps+0x28e/0x4d0
drivers/usb/gadget/function/f_midi2.c:1246
...
Call Trace:
<TASK>
f_midi2_set_alt+0x11c/0xf00 drivers/usb/gadget/function/f_midi2.c:1296
composite_setup+0x1ffd/0x3480 drivers/usb/gadget/composite.c:1933
configfs_composite_setup+0xbd/0x100 drivers/usb/gadget/configfs.c:1877
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Assisted-by: Gemini:gemini-3.5-flash Gemini:gemini-3.1-pro-preview syzbot
Reported-by: syzbot+bbb6dad313f4aaa8da6b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bbb6dad313f4aaa8da6b
Link: https://syzkaller.appspot.com/ai_job?id=8ce30b1a-8cf7-4e38-bcf7-1f69e6f6313f
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Closes: https://syzkaller.appspot.com/bug?extid=01a17afb30637396955e
Link: https://patch.msgid.link/cafe65f4-e1bb-46a3-901d-732814b861b2@mail.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
HD3SS3220 requires VDD5 input to be present 2ms before VCC33 is applied,
or else it gets backpowered via the 3.3V rail in a non-functional state
and wedges the I2C bus, bringing down all devices on it.
Enable both regulators in the datasheet prescribed sequence if provided.
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260821-hd3ss3220-regulators-v1-2-405e5c4fb306@flipper.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
regulator_is_enabled() reports the aggregate regulator state, not
whether this consumer holds an enable reference. If another consumer
enables VBUS first, the driver can skip its own regulator_enable() call
and later attempt to drop a reference it never acquired, triggering an
unbalanced regulator disable warning.
Track successful enable and disable calls locally. Keep the state
unchanged when an operation fails so a later role or ID notification
retries the operation while this consumer keeps balanced references.
Fixes: b3f9d6e491fd ("usb: typec: hd3ss3220: Check if regulator needs to be switched")
Cc: stable <stable@kernel.org>
Link: https://github.com/qualcomm-linux/kernel/issues/472
Signed-off-by: Chang Wu <kunjinkao.jp@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Jan Remmet <j.remmet@phytec.de>
Reviewed-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Link: https://patch.msgid.link/20260819152027.90994-1-kunjinkao.jp@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The forceRM bit of the DEPCMD register controls the behavior of the
EndTransfer command used to stop an active transfer. Older DWC3
programming guide revisions recommended setting forceRM=1 when
issuing EndTransfer. Newer programming guide revisions recommend
issuing EndTransfer with forceRM cleared.
With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer
aborted through the ep_dequeue path was observed to remain active
after EndTransfer completion. A subsequent StartTransfer issued on the
same endpoint triggered writes associated with the aborted transfer.
This resulted in an SMMU fault because the transfer buffer had already
been unmapped during EndTransfer command-completion cleanup.
Using forceRM=0 eliminates the issue. Although older DWC3 programming
guide revisions recommended setting forceRM=1, no issues are known
from using forceRM=0. Clear forceRM when issuing EndTransfer to provide
consistent EndTransfer behavior and align with newer programming guide
recommendations.
Fixes: 1e43c86d84fb ("usb: dwc3: core: Add DWC31 version 2.00a controller")
Cc: stable <stable@kernel.org>
Signed-off-by: Elson Serrao <elson.serrao@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260813151456.867008-1-elson.serrao@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dwc3_google_probe() zero initialises struct dwc3_probe_data and never
assigns its properties member. The unspecified state of gsbuscfg0_reqinfo
is encoded as DWC3_GSBUSCFG0_REQINFO_UNSPECIFIED (0xffffffff), not as
zero, so dwc3_get_software_properties() reads the zeroed field as a value
the glue explicitly requested:
if (properties->gsbuscfg0_reqinfo !=
DWC3_GSBUSCFG0_REQINFO_UNSPECIFIED) {
dwc->gsbuscfg0_reqinfo = properties->gsbuscfg0_reqinfo;
return;
}
Two things follow. dwc3_config_soc_bus() programs GSBUSCFG0.REQINFO with
zero on hardware that never asked for it, and the early return skips the
walk over the parent devices, so a swnode or device tree supplied
snps,gsbuscfg0-reqinfo would be ignored.
Assign DWC3_DEFAULT_PROPERTIES so the unset fields carry their unspecified
sentinels and the controller is left alone.
Fixes: 8995a37371bf ("usb: dwc3: Add Google Tensor SoC DWC3 glue driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260819182158.1351869-1-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some devices use combo PHYs (i.e. USB3 + DisplayPort), which also
handle the lane muxing. These PHYs are referenced twice from
the USB-C connector (USB super-speed lines and SBU/AUX lines)
resulting in the mux being configured twice. Avoid this by
dropping duplicates.
This is a re-application of b145c3f29d62 ("usb: typec: mux: avoid
duplicated mux switches"), with fix derived from usb: typec: mux:
Fix typec_switch_match() .
Fixes: f576c75f95a5 ("Revert "usb: typec: mux: avoid duplicated mux switches"")
Cc: stable <stable@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Co-developed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260822072556.490594-1-marex@nabladev.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fwnode_typec_switch_get() sporadically returns NULL instead of an
-EPROBE_DEFER for orientation-switch described in DT. This makes it
impossible to discern whether the DT does describe an orientation-switch
which did not probe yet, or whether the DT does not describe the switch.
This happens with gpio-sbu-mux connected to an I2C GPIO expander.
The class_find_device() on typec_switch_match() may return NULL in case
the mux did not probe just yet early on boot. The sw_devs[] array can be
empty on boot as well. If these two conditions occur, then the conditional
if (to_typec_switch_dev(dev) == sw_devs[i]) evaluates to true and the match
function returns NULL, which propagates to fwnode_typec_switch_get() which
makes it look as if the orientation-switch was not described in DT.
This is incorrect, because the mux driver will probe a bit later on, but
at that point, the caller of fwnode_typec_switch_get() already got the
NULL return value. The NULL return value also does not trigger IS_ERR(),
therefore the caller driver interprets this as if the orientation-switch
is not described in DT, and does not return -EPROBE_DEFER to try again,
even if it should.
Fix this by checking the class_find_device() return value, and return
-EPROBE_DEFER if it is NULL right away. If the return value is not NULL,
perform the deduplication test, and if that test passes, consider the
return value to be already non-NULL.
Fixes: a53b4f9c51a9 ("usb: typec: mux: avoid duplicated orientation switches")
Cc: stable <stable@kernel.org>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260817182302.146546-1-marex@nabladev.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the kmalloc() calls in usb_mdc800_init() for irq_urb_buffer and
download_urb_buffer to kzalloc(), avoiding potential stack leaks if a
shorter message is received in mdc800_usb_irq() and
mdc800_usb_download_notify()
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Link: https://patch.msgid.link/20260819-usb_misc_random-v1-1-43a0dcee3a32@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() and dev_err_probe() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260731035448.252289-12-panchuang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Link: https://patch.msgid.link/20260731035448.252289-11-panchuang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"),
devm_request_irq() and devm_request_threaded_irq() automatically log
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() and dev_err_probe() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Link: https://patch.msgid.link/20260731035448.252289-10-panchuang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Link: https://patch.msgid.link/20260731035448.252289-9-panchuang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"),
devm_request_irq() and devm_request_threaded_irq() automatically log
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() and dev_err_probe() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Link: https://patch.msgid.link/20260731035448.252289-8-panchuang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Link: https://patch.msgid.link/20260731035448.252289-7-panchuang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"),
devm_request_irq() and devm_request_threaded_irq() automatically log
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com> # renesas_usbf.c
Link: https://patch.msgid.link/20260731035448.252289-6-panchuang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"),
devm_request_irq() and devm_request_threaded_irq() automatically log
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() and dev_err_probe() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Acked-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260731035448.252289-5-panchuang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Link: https://patch.msgid.link/20260731035448.252289-4-panchuang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_threaded_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Link: https://patch.msgid.link/20260731035448.252289-3-panchuang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"),
devm_request_irq() and devm_request_threaded_irq() automatically log
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260731035448.252289-2-panchuang@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify 'dwc3_lsp_write()' by using the convenient
'kstrtou32_from_user()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260804134943.651893-1-dmantipov@yandex.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DWC3 driver does manage phys itself sufficiently for Qualcomm platforms.
If xhci-skip-phy-init is not set, the HCD core does a phy_init and phy_
exit is done only when roothub is being destroyed. Due to this, during
system suspend in host mode, although phy_exit is done by DWC3 core, the
init_count on phy is never down to zero since HCD core also did an init.
consequently causing phy's exit routine to not be called. Hence, add
support to skip phy management by USB core.
Some Exynos platforms still do rely on USB core for phy_calibrate calls,
hence disable USB core management for Qualcomm platforms only.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260723-dwc3-skip-init-quirk-v1-1-97682bb44ebd@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
