| Age | Commit message (Collapse) | Author |
|---|
|
Add memblock_alloc_low() coverage using the simulator's low address
limit. Exercise aligned allocation, an allocation whose last byte is
immediately below the limit, an alignment constraint that prevents
fitting below it, and fully reserved low memory with high memory still
available.
Run each case with bottom-up and top-down allocation. Check zeroing
and reserved-region accounting as well as returned addresses. Verify
that an unrestricted allocation can use the free high memory after
the low allocation fails.
Document the simulated limit and remove the completed TODO.
Assisted-by: LLM
Signed-off-by: Tianyi Chen <hi@tychen.cc>
Link: https://patch.msgid.link/142ab1025fd1e4b5dcd2a1591b964626ebce9d23.1788997523.git.hi@tychen.cc
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Commit 1e4c64b71c9b ("mm/memblock: Add "reserve_mem" to reserved named
memory at boot up") introduce the usage of memparse(), which is not
defined in memblock test.
Add the definition and link it to fix the build.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240806010319.29194-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Commit cf4694be2b2cf ("tools: Add atomic_test_and_set_bit()") changed
tools/arch/x86/include/asm/atomic.h to include <asm/asm.h>, which causes
'make -C tools/testing/memblock' to fail with:
In file included from ../../include/asm/atomic.h:6,
from ../../include/linux/atomic.h:5,
from ./linux/mmzone.h:5,
from ../../include/linux/mm.h:5,
from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/asm.h: No such file or directory
11 | #include <asm/asm.h>
| ^~~~~~~~~~~
Create a symlink to asm/asm.h in the same manner as the existing one to
asm/cmpxchg.h.
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/010101857c402765-96e2dbc6-b82b-47e2-a437-4834dbe0b96b-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Add TEST_F_EXACT flag, which specifies that tests should run
memblock_alloc_exact_nid_raw(). Introduce range tests for
memblock_alloc_exact_nid_raw() by using the TEST_F_EXACT flag to run the
range tests in alloc_nid_api.c, since memblock_alloc_exact_nid_raw() and
memblock_alloc_try_nid_raw() behave the same way when nid = NUMA_NO_NODE.
Rename tests and other functions in alloc_nid_api.c by removing "_try".
Since the test names will be displayed in verbose output, they need to
be general enough to refer to any of the memblock functions that the
tests may run.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/5a4b6d1b6130ab7375314e1c45a6d5813dfdabbd.1667802195.git.remckee0@gmail.com
|
|
Change verbose and movable node build options to run-time options.
Movable node usage:
$ ./main -m
Or:
$ ./main --movable-node
Verbose usage:
$ ./main -v
Or:
$ ./main --verbose
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20220714031717.12258-1-remckee0@gmail.com
|
|
Add VERBOSE and MEMBLOCK_DEBUG user-provided arguments. VERBOSE will
enable verbose output from Memblock simulator. MEMBLOCK_DEBUG will enable
memblock_dbg() messages.
Update the help message to include VERBOSE and MEMBLOCK_DEBUG. Update
the README to include VERBOSE. The README does not include all available
options and refers to the help message for the remaining options.
Therefore, omit MEMBLOCK_DEBUG from README.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/5503f3efe82ecef5c99961a1d53003c8ad06cf27.1656907314.git.remckee0@gmail.com
|
|
Add tests for memblock_alloc_try_nid for top down allocation direction.
As the definition of this function is pretty close to the core
memblock_alloc_range_nid, the test cases implemented here cover most of
the code paths related to the memory allocations.
The tested scenarios are:
- Region can be allocated within the requested range (both with aligned
and misaligned boundaries)
- Region can be allocated between two already existing entries
- Not enough space between already reserved regions
- Memory range is too narrow but memory can be allocated before
the maximum address
- Edge cases:
+ Minimum address is below memblock_start_of_DRAM()
+ Maximum address is above memblock_end_of_DRAM()
Add checks for both allocation directions:
- Region starts at the min_addr and ends at max_addr
- Maximum address is too close to the beginning of the available
memory
- Memory at the range boundaries is reserved but there is enough space
to allocate a new region
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/d6c282e0f9f62c15bf74c216214604764232d637.1646055639.git.karolinadrobnik@gmail.com
|
|
Add checks for memblock_alloc_from for default allocation direction.
The tested scenarios are:
- Not enough space to allocate memory at the minimal address
- Minimal address parameter is smaller than the start address
of the available memory
- Minimal address is too close to the available memory
Add simple memblock_alloc_from test that can be used to test both
allocation directions (minimal address is aligned or misaligned).
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/3dd645f437975fd393010b95b8faa85d2b86490a.1646055639.git.karolinadrobnik@gmail.com
|
|
Add checks for memblock_alloc for top down allocation direction.
The tested scenarios are:
- Region can be allocated on the first fit (with and without
region merging)
- Region can be allocated on the second fit (with and without
region merging)
Add checks for both allocation directions:
- Region can be allocated between two already existing entries
- Limited memory available
- All memory is reserved
- No available memory registered with memblock
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/26ccf409b8ff0394559d38d792b2afb24b55887c.1646055639.git.karolinadrobnik@gmail.com
|
|
Memblock simulator needs to be able to reset memblock data structures
between different test cases. Add a function that sets all fields to
their default values.
Add a test checking if memblock is being initialized to expected values.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/8c185aa7e0dd68c2c7e937c9a06c90ae413e240f.1643796665.git.karolinadrobnik@gmail.com
|
|
Add basic project files, together with local stubs of required headers.
Update tools/include/slab.h to include definitions used by memblock.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/d296fceb023a04b316a31fbff9acf1e76ac684e4.1643796665.git.karolinadrobnik@gmail.com
|
