| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/rmap: index MAP_PRIVATE file-backed folios by anonymous pgoff"
(Lorenzo Stoakes)
Index MAP_PRIVATE file-backed folios by their anonymous page offset
to resolve confusion around reverse mapping for zeroed and CoW'd
file-backed memory.
Use this new VMA anonymous page offset tracking to eliminate index
conflicts and lay the foundation for scalable CoW performance
improvements.
- "promote mapped executable folios after first usage for MGLRU"
(Baolin Wang)
Make MGLRU's protection of mapped executable file folios more
reliable. Follow the classical LRU's logic, promoting mapped
executable file folios after their first usage to give executable
code a better chance to stay in memory and improve workload
performance.
- "mm: vmscan: fix node reclaim ignoring swappiness parameter" (Ridong
Chen)
Fix per-node proactive reclaim interface's ignoring the swappiness
parameter when CONFIG_MEMCG is disabled by consolidating
sc_swappiness() into a single function that checks
proactive_swappiness regardless of kernel configuration.
- "mm/vmscan: reduce lru_lock contention via vmstat-derived
scan-balance cost" (Usama Arif)
Reduce lru_lock contention in the reclaim path by deriving
scan-balance costs from vmstat counters rather than lock-acquired
producer updates.
Read and decay these cost signals on the reclaim side under a
dedicated per-lruvec lock, reducing total LRU lock wait time by over
60% without impacting scan throughput.
- "zram: fix zram issues reported by sashiko" (Sergey Senozhatsky)
Fix two low-risk zram bugs which Sashiko spotted in drive-by review.
- "Honor XA_FLAGS_ACCOUNT in xas_split_alloc() and charge to folio's
memcg" (Zi Yan)
Fix xas_split_alloc() by enabling target folio memcg charging during
splits and adding the missing __GFP_ACCOUNT flag for proper XArray
node memory accounting.
- "selftests/mm: use pattern matching in .gitignore" (Pratyush Mallick)
Replace hardcoded binary names in selftests/mm/.gitignore with a
generic pattern-matching rule to automatically ignore generated test
files and avoid manual updates when adding new tests.
- "mm/page_ext: remove pgdat_page_ext_init()" (Sang-Heon Jeon)
Make the incompatibility between FLATMEM and NUMA explicit in
mm/Kconfig and remove the unused pgdat_page_ext_init() function.
- "zram: fix zstd error paths and add parameter validation" (Haoqin
Huang)
Clean up zram compression backends by removing redundant error
cleanup, adding parameter and dictionary validation, auto-prefixing
algorithm error logs, and resetting parameters prior to
reinitialization.
- "zram: fix stale scan bounds after reinitialization" (Longlong Xia)
Prevent out-of-bounds slot accesses during concurrent zram resets by
moving table scan bound calculations under dev_lock in
writeback_store() and read_block_state().
- "add anon mTHP collapse test cases" (Baolin Wang)
Extend selftests helper functions to support arbitrary page orders
and add new test cases and options for mTHP collapse in khugepaged.
- "selftests/mm: Handle unsupported and transient test conditions"
(Muhammad Usama Anjum)
Update MM selftests to report a SKIP status instead of a failure when
required kernel or filesystem features are unsupported, while adding
retry logic for transient page migration errors.
- "mm/zswap: Fixes and improves the zswap shrink" (Hao Jia)
Fix the missing zswap global shrinker when CONFIG_MEMCG is disabled
and extend shrink_memcg() to support batch writeback for improved
writeback efficiency.
- "alloc_tag: introduce IOCTL-based filtering for MAP" (Suren
Baghdasaryan)
Introduce an IOCTL-based binary interface for memory allocation
profiling that enables kernel-side filtering before per-CPU counter
aggregation.
This eliminates the text-parsing overhead of /proc/allocinfo and
provides up to a 20x speedup by transferring only filtered allocation
data to userspace.
- "better block swap batching and a different take on swap_ops v5"
(Christoph Hellwig)
Refactor block swap I/O to use swap_iocb for batching instead of
single-bio requests and rebase the swap_ops interface, achieving
faster swap throughput during kernel builds.
- "mm: kmemleak: reduce transient false positives by confirming leaks"
(Catalin Marinas)
Reduce false-positive kmemleak reports by combining two kmemleak
enhancements that add a second confirmation scan and a configurable
minimum unreferenced scan count module parameter.
- "mm: kmemleak: default min_unref_scans to 2 for verbose kernels"
(Breno Leitao)
Auto-scanning kernels can generate false-positive memory leak reports
on single scans, so this patch defaults min_unref_scans to 2 when
CONFIG_DEBUG_KMEMLEAK_VERBOSE is enabled to require a second
confirming scan.
- "swap_ops updates" (Christoph Hellwig)
Batching I/O for synchronous swap devices causes performance
regressions and filesystem-based swap suffers from double-indirection
overhead. This series resolves both issues by reintroducing per-folio
writes for synchronous swap and allowing filesystems to directly
export their own swap_ops.
- "mm/khugepaged: several cleanups" (Nico Pache)
khugepaged accumulated redundant state-checking patterns and outdated
comments following mTHP integration. Introduce dedicated helpers for
PTE validation and event counting while refreshing the internal
documentation.
- "maple_tree: lock checking and clean ups" (Liam Howlett)
Syzbot reports incorrectly blame memory management exit paths for
locking bugs, maple tree erase operations risk allocation failures
without gfp flags and internal documentation lacks clarity.
Improve lock error detection, update docs, fix race and allocation
edge cases and optimize erase allocations using a fallback to
GFP_KERNEL | GFP_NOFAIL.
* tag 'mm-stable-2026-08-26-15-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (172 commits)
selftests/proc: make proc-maps-race work with READ_IMPLIES_EXEC
memcg: move LRU size accounting on reparenting instead of copying it
mm/vmscan: fix comment logic in balance_pgdat
maple_tree: add helper mas_make_walkable()
maple_tree: avoid extra gap calculation
maple_tree: fix argument name in header
maple_tree: change two GFP flags in tests
maple_tree: document erase and allocations better
maple_tree: avoid mas_erase() and mtree_erase() failures
maple_tree: document that erase may use GFP_KERNEL for allocations
maple_tree: catch race in mas_alloc_cyclic()
maple_tree: add bulk parent set helper
maple_tree: micro optimisation of mas_wr_store_type()
maple_tree: optimise mas_wr_node_store() when not in rcu mode
maple_tree: use prefetched value in mas_wr_store_type()
maple_tree: clarify comments on mas_nomem()
maple_tree: drop MAPLE_ALLOC_SLOTS
maple_tree: drop dead code from mas_extend_spanning_null()
maple_tree: documentation fix
maple_tree: add write lock checking with lockdep sequence numbers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull more documentation updates from Jonathan Corbet:
"A handful of late-arriving fixes, a Japanese translation that was
ready long ago but fell through the cracks, and an update to the
Italian translations"
* tag 'docs-7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
docs: panic: Disclaimer about console verbosity when using panic_print with pstore
docs: kernel-parameters: add CPU_FREQ, CPU_IDLE build options
doc:it_IT: align Italian documentation in process
docs: threat-model: fix /dev/kmsg reference
docs: block: fix dead http link in blk-mq.rst
docs/ja_JP: translate submitting-patches.rst (tag usage)
|
|
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Add support for 'slot' based PMU events, paired with new UAPI that
compels the user to select a specific PMU implementation
- Lazy save/restore of vCPU state for pKVM, along with various fixes
and cleanups to the management of vCPU state between the untrusted
host and pKVM hypervisor
- Disable traps of EL1 registers for nested hypervisors when
FEAT_NV2p1 is present, guaranteeing that EL2-specific register bits
are stateful in the EL1 counterpart
- Leverage FEAT_NV3 to avoid unnecessary ERET/TLBI traps when the
scope of those instructions remains 'in host' (i.e. L1
kernel/userspace)
- Pile of fixes for the management of the VNCR pseudo-TLB, such as
under-invalidations and races with concurrent TLBIs on other vCPUs
- Consolidate the non-protected and pKVM view of ICH_VTR_EL2 to a
runtime-patched constant, allowing the same data to be shared with
pKVM prior to dropping host privileges
- Considerable pile of LLM-assisted fixes around the shop but mostly
in the VGIC, our in-kernel generator of bugs (and sometimes
interrupts)
LoongArch:
- Advertise already-supported capabilities
- Some bug fixes about timer and MMIO
- Some hardening about interrupt injection
- Replace kvm_err() with kvm_pr_unimpl()
- Add FPU/LSX/LASX test cases for selftests
RISC-V:
- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch-specific tracepoints in KVM RISC-V
- Eager page splitting when enabling dirty logging
- Optimize hfence request handling for SMP Guests
- Improve dirty log clearing by skipping zero bits in mask
- Guard HFENCE range loops against overflow
- CPU PM notifiers in KVM RISC-V for non-retentive idle states
- Fix kernel-mode vector context save/restore for Guest
s390:
- Fixes for vfio-ap
- Fixes for the gmap rework
- Fixes for vsie
- AI triggered fixes all over
- diag9c tracing
- code move preparation for the additional arm64 support
- enable CONTEXT_ANALYSIS
x86:
- Perform spring cleaning on x86.{c,h} and asm/kvm_host.h, by adding
regs.c (the kvm_cache_regs.h => regs.h is already applied) and
msrs.{c,h}, and moving relevant code out of x86.c
- Split kvm_mmu in three parts, respectively to describe the format
of page tables, walking the guest page tables and building the page
tables. Always use the same page table walker kvm->arch.gva_walk as
the entry point to convert a guest's virtual address, where the
previous code used two different kvm_mmu structs depending on
whether the walk included nested EPT/NPT or not. Make page fault
vmexits reuse the permission checking machinery that is used for
guest page faults. This is both a cleanup and a baby step towards
supporting XS/XU memory permissions
- Document some of the "fun" gotchas with the APIC base when creating
IRQCHIPs on x86
- Remove a defunct masterclock update from kvm_xen_shared_info_init().
It could result in incorrect kvmclock due to triggering an
unnecessary switch to/from masterclock mode
- Skip Xen runstate time updates if time has effectively gone
backwards, so that the guest doesn't report 100% steal time for
a very, very long time
- Drop KVM's runtime updates of the Xen PV timing CPUID leaf, as KVM
was updating the wrong sub-leaf, and upstream KVM will soon provide
all the information needed by userspace to populate the CPUID field
itself
- Fix a bug where KVM would walk a newly created rmap without holding
the rmap lock (or mmu_lock) during aging
- Fix a bug where aging TDP MMU SPTEs could clobber FROZEN SPTEs
- Fix a variety of #DB priority bugs
- Fix a class of races related to enabling Hyper-V emulation on a
vCPU after the vCPU is visible to the rest of KVM
- Use static calls for nested virtualization ops
- Move more KVM-internal code out of x86's kvm_host.h
- Enumerate support for a variety of Zhaoxin instructions that don't
require explicit virtualization
- Fix missing EFER validation bugs, including in the KVM_SET_SREGS*
path
- Harden kvm_vcpu_map() against double-mapping and thus leaking
references
- Misc fixes and cleanups, e.g. for largely benign syzkaller splats
x86 (Intel):
- Zero a vCPU's entry in VMX's Posted Interrupt Descriptor table used
for IPI virtualization when the vCPU is freed, to fix a
use-after-free where hardware will write to a freed vCPU's PID
- Service local TLB flushes on a failed nested VM-Enter to fix a bug
where KVM could miss a TLB on a future, successful VM-Enter with
the same L2 VPID
- Cap the maximum value shoved into the VMX Preemption Timer to
workaround an erratum that affects all existing Intel CPUs that
support CPUID 0x15
- Fix VPID virtualization bugs where KVM would fail to flush hardware
TLBs
- Harden the TDX "populate" ioctls against bad input, and to prepare
for supporting in-place private<=>shared conversion
x86 (AMD):
- Forcefully invalidate SNP VMSA pages if their backing guest_memfd
page is zapped/invalidated, e.g. due to a PUNCH_HOLE in response to
a Page-State Change request
- Remove a dying VM from the GA Log notifier list before the VM is
actually destroyed, to fix a potential use-after-free
- While FOLL_WRITE was needed in the past to trigger CoW unsharing,
nowadays FOLL_LONGTERM does that already even without FOLL_WRITE,
and in fact, get_user_pages() actually disallows FOLL_WRITE
together with FOLL_LONGTERM. So don't pass FOLL_WRITE when
registering encrypted memory regions, i.e. when pinning SEV/SEV-ES
guest memory, to fix a regression with file-backed memory
introduced by KVM's (correct) usage of long-term pins
(This was reviewed by mm maintainers; for more information, see
commit ee1a586dd1fa "KVM: SEV: Drop FOLL_WRITE for encrypted region
registration")
- Allocate full pages for SEV/SEV-ES {DE,EN}CRYPT ops on SNP-enabled
hosts to fix a data corruption issue due to the PSP driver
assigning to-be-written pages to firmware (as required by the SNP
specs)
- Unconditionally intercept ICBEP so that KVM generates the correct
guest RIP when handling an ICEBP-induced TASK_SWITCH #VMEXIT
- Harden the SNP "populate" ioctls against bad input, and to prepare
for supporting in-place private<=>shared conversion
Generic:
- Remove kvm_debugfs_dir if kvm_init() fails after creating KVM's
debugfs
- Add a per-VM bitmap to track which vCPU IDs have been "claimed" but
for which the vCPU isn't yet online, and use the bitmap to reject
duplicate IDs before calling into arch code. This allows arch code
to consume vcpu_id without having to worry about cross-vCPU
clobbering (at least s390 and x86 have had related bugs)
- Rework the so called "prepare" and "invalidate" guest_memfd hooks
to prepare for in-place private<=>shared conversion, and clean up a
few warts along the way
Selftests:
- Automatically allocate a full page for L2 guest stacks on x86
instead of requiring test-specific L1 guest code to carve out a
portion of the L1 stack for L2 usage, and to ensure the L2 stack
also adheres to the x86-64 calling convention ABI
- Add a selftest to verify {Guest,Host}-Only behavior in x86's
mediated PMU
- Clean up nested SVM's handling of GPRs on L2<=>L1 transitions,
reuse the functionality for nested VMX, and drop the ucall hack
that was fudging around the lack of GPR switching on nVMX
- Add a stress test to verify KVM doesn't clobber/drop #PF state,
e.g. CR2, across save/restore, including when L2 is active
- Add a test to verify KVM_CREATE_VM accepts exactly what is reported
by KVM_CAP_VM_TYPES
- Misc selftests fixes and cleanups
- Fix several issues with seeding the pRNG, and rework the pRNG APIs
to that the pRNG can be sanely used in host code, not just guest
code
- Add an IRQ test to validate virtual IRQ deliverty for IRQs wired up
via KVM_IRQFD + KVM_SET_GSI_ROUTING, with optional support for
triggering IRQs via writes to an assigned VFIO device
- Add syscall wrappers to assert success on a variety of pthreads and
CPU affinity APIs
- Set vCPU pthread affinity as early as possible to reduce contention
issues that were surfaced by PREEMPT_LAZY, which result in runtimes
of over a minute on large hosts, versus the expected ~5 seconds
- Rework the PMU counters test to run each testcase using a single VM
with many vCPUs for each sub-testcase, instead of using a unique VM
for each sub-testcase. This cuts the runtime by ~20x
Miscellaneous:
- MAINTAINERS updates for vfio-ap, guest_memfd, kvm-x86. Mostly
representing the status quo more accurately, but also... welcome
David Hildenbrand as guest_memfd reviewer!"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (413 commits)
KVM: arm64: Validate GICv5 timer PPIs before claiming ownership
KVM: arm64: vgic: Reject out-of-range GICv5 PPI IDs
KVM: arm64: vgic: Prevent speculative SPI array underflow
KVM: arm64: vgic: Free gic_kvm_info on initialization failure
KVM: arm64: Avoid mismatched accesses to 'struct kvm_nvhe_init_params'
s390/vfio-ap: Fix NULL deref in status_show() during queue probe
s390/vfio-ap: Fix hot-unplug skipped when last AP adapter or domain removed
s390/vfio-ap: fix potential use of uninitialized apm_filtered bitmap
s390/vfio-ap: Fix control domain removal in vfio_ap_mdev_cfg_remove
s390/vfio-ap: Fix required lock not held during update of ap_matrix_mdev object
s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects
s390/vfio-ap: Fix dereference matrix_mdev->kvm without checking for NULL
s390/vfio-ap: Fix stale do_remove flag across iterations in vfio_ap_mdev_cfg_remove
RISC-V: KVM: fix vcpu vector context handling for kernel-mode vector
riscv: vector: allow non-preemptible kernel-mode vector with IRQs off
riscv: vector: refactor riscv_v_start_kernel_context
KVM: s390: gmap: Make prefix handling optional
KVM: s390: gmap: Make CMMA optional
KVM: s390: gmap: Make storage keys optional
KVM: s390: Prepare gmap for a second KVM implementation
...
|
|
Currently, hugetlb_cma reservation only supports absolute sizes (e.g.,
hugetlb_cma=2G or hugetlb_cma=0:1G,1:1G). This can be restrictive in
heterogeneous environments or when deploying common kernel command lines
across machines with different memory capacities.
Add support for percentage-based hugetlb_cma reservation (e.g.,
hugetlb_cma=20% or hugetlb_cma=0:20%,1:10%).
The percentage is calculated against the total memory (for global
settings) or against the node-specific memory (for node-specific settings)
using memblock APIs during early boot.
Link: https://lore.kernel.org/20260807040003.2156630-1-souravpanda@google.com
Signed-off-by: Sourav Panda <souravpanda@google.com>
Acked-by: Usama Arif <usama.arif@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Free page reporting currently hardcodes a 2-second interval between
reports. This rigid delay cannot accommodate diverse guest workloads.
This patch introduces a module parameter, page_reporting_delay_ms
(default: 2000), allowing users to tune the reporting rate:
- Lower values enable aggressive memory reclamation by returning unused
pages to the host immediately.
- Higher values help batch pages during spiky allocation/free churn,
reducing hypercalls and nested page fault overheads.
Setting the delay to 0 is safe and execution is strictly gated by:
- reporting is only triggered by high-order page frees.
- expensive hypercalls are bounded by a slot capacity watermark check
before proceeding.
Link: https://lore.kernel.org/20260731193705.2902728-1-pratmal@google.com
Signed-off-by: Pratyush Mallick <pratmal@google.com>
Reviewed-by: SJ Park <sj@kernel.org>
Acked-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- swiotlb:
- new configuration option for the default pool size
(Jagadeesh Pagadala)
- reduce overhead for high watermark tracking (chenhuguanshen)
- minor code cleanups and improvements (Vova Sharaienko, Honglei Huang
and Marek Szyprowski)
- add proper tracking of the shared DMA state through direct, pool and
swiotlb paths (Aneesh Kumar K.V)
This is important for confidential-computing
* tag 'dma-mapping-7.3-2026-08-24' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma/swiotlb: decouple high watermark tracking from CONFIG_DEBUG_FS
MAINTAINERS: update tree for DMA MAPPING HELPERS
dma/swiotlb: introduce Kconfig option for compile-time default pool size
dma-direct: Improve readability of the dma_direct_map_sg() for P2PDMA case
iommu/dma: simplify dma_iova_destroy() and drop the free_iova helper
dma-coherent: use KiB in DMA allocation logs
dma-coherent: fix spacing coding style issue
* tag 'dma-mapping-7.3-2026-08-24-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (23 commits)
swiotlb: remove unused SWIOTLB_FORCE flag
dma: swiotlb: handle set_memory_decrypted() failures
dma: swiotlb: free dynamic pools from process context
dma-direct: rename ret to cpu_addr in alloc helpers
dma-direct: select DMA address encoding from __DMA_ATTR_ALLOC_CC_SHARED
dma-direct: set decrypted flag for remapped DMA allocations
dma-direct: make dma_direct_map_phys() honor DMA_ATTR_CC_SHARED
dma-direct: Move dma_direct_map_phys() to dma/direct.c
dma-direct: pass attrs to dma_capable() for DMA_ATTR_CC_SHARED checks
dma-mapping: make dma_pgprot() honor __DMA_ATTR_ALLOC_CC_SHARED
dma: swiotlb: track pool encryption state and honor DMA_ATTR_CC_SHARED
dma: swiotlb: pass mapping attributes by reference
dma-pool: track decrypted atomic pools and select them via attrs
dma-direct: use __DMA_ATTR_ALLOC_CC_SHARED in alloc/free paths
dma-mapping: Add internal shared allocation attribute
coco: arm64: s390: powerpc: Mark secure guests with CC_ATTR_GUEST_MEM_ENCRYPT
dma-direct: swiotlb: handle swiotlb alloc/free outside __dma_direct_alloc_pages
s390: Expose protected virtualization through cc_platform_has()
swiotlb: Preserve allocation virtual address for dynamic pools
dma: free atomic pool pages by physical address
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Add kfree_rcu_nolock() that can be used from contexts where spinning
on a lock might be unsafe, such as a BPF program attached to an
arbitrary function, or in NMI context. This complements the existing
kfree_nolock() support (Harry Yoo)
- Runtime instead of compile-time slabobj_ext sizing.
Avoid wasting memory when memory allocation profiling is compiled but
not enabled, with initial partial support to also avoid wasting
memory for objcg pointers when those are not needed, while profiling
is enabled (Vlastimil Babka)
- Various non-urgent fixes, cleanups and optimizations (Hao Li,
Hongling Zeng, Li RongQing, Li Xiasong, Seongjun Hong, Shengming Hu)
* tag 'slab-for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (31 commits)
mm/slab, kfence, memcg: completely remove obj_ext for kfence objects
mm/slab: stop allocating objcg pointers when unnecessary
mm/slab: add cache_ and slab_needs_objcg() helpers
mm/slab: stop exporting kvfree_rcu_barrier[_on_cache]()
slub_kunit: extend the test for kfree_rcu_nolock()
mm/slab: introduce kfree_rcu_nolock()
mm/slab: introduce struct kvfree_rcu_head for kvfree_rcu batching
mm/slab: reduce slabobj_ext memory with allocation profiling disabled
mm/slab: introduce slab_obj_ext_has_codetag()
mm/slab: allow kfree_rcu_sheaf() on PREEMPT_RT
mm/slab: extend deferred free mechanism to handle rcu sheaves
mm/slab: use call_rcu() in unknown context if irqs are enabled
mm/slab: handle the !allow_spin case in kfree_rcu_sheaf()
mm/slab: change struct slabobj_ext to a union
mm/slab: replace slab.stride with obj_exts_in_object
mm/slab: abstract slabobj_ext.ref access
mm/slab: abstract slabobj_ext.objcg access
mm/slab: make slab_obj_ext() determine object index
mm: move struct slabobj_ext to mm/slab.h
mm/slab: remove objs_per_slab()
...
|
|
pstore
Users of panic_print / panic_sys_info are usually aware of the potentially
huge amount of information displayed with such options - their goal by
using them is indeed to dump more information during panic!
What might come unnoticed at first is the impact that the console_verbose()
call on panic path has, specially in cases that users rely on pstore as
a means to collect the panic logs. Recent experience shows that dumping
all tasks in an ARM64 system (with qcom_geni tty driver) gets a 2 minute
delay on panic time due to writing such information to console. But in
that case, pstore was used, so there was no need for console printing,
and suppressing that reduced the full time to less than 0.5 second.
The option "printk.console_no_auto_verbose" aims exactly at this use
case: avoid automatically increasing the loglevel during panic path.
So, let's officially document this to avoid users wasting their time
either on long panic printing or debugging the panic delays.
While at it, improve the readability of the panic_print text, by
adding some line breaks.
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Bradley Morgan <include@grrlz.net>
Reviewed-by: Feng Tang <feng.tang@linux.alibaba.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260819183419.2203903-1-gpiccoli@igalia.com>
|
|
CPU_FREQ and CPU_IDLE are used in descriptions of some kernel parameters
so add their descriptions to the build options list.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260815172934.3604009-1-rdunlap@infradead.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Paul McKenney:
"Make expedited grace periods expedite normal RCU callbacks
Miscellaneous fixes:
- Improve diagnostic output with character task states
- Mark accesses to inform KCSAN of concurrency design
- Move from kmalloc() to kmalloc_obj()
- Documentation updates
- Improve handling of RCU deferred quiescent states
- Clean up unused function arguments and structure fields
- Reduce show_rcu_gp_kthreads() stack space
Tasks RCU updates:
- Clean up after SRCU re-implementation of Tasks Trace RCU
- Mark accesses to inform KCSAN of concurrency design
- Add ->lazy_timer status to diagnostic output
- Remove an unnecessary memory barrier
- Fix a data race, courtesy of KCSAN
- Documentation updates
- Convert cond_resched_tasks_rcu_qs() from macro to static inline
function
SRCU updates:
- Add Rust helpers for SRCU
- Avoid losing queued work at cleanup_srcu_struct() time
Torture-test updates:
- Preparation work for immediate RCU priority deboosting
- Test RCU readers from real interrupt handlers (as opposed to
softirq)
- Simplify code through use of cpumask_next_wrap()
- Improve diagnostic output with character task states
- Add rcutorture.nwriters parameter to allow lightweight stall
testing, and rcutorture.stall_only to make doing so easier
- Test an RCU Tasks Trace grace period implying an RCU grace period
- Make RCU Tasks Trace torturing track reader batches
- Fix a data race, courtesy of KCSAN
- Plug a shuffle_tmp_mask memory leak on kthread spawn failure"
* tag 'rcu.2026.08.18a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (59 commits)
rcu: Add closing parenthesis in comment in rcu_read_unlock_strict()
rcutorture: Make {,s}rcu_read_delay() better handle forward-progress testing
rcutorture: Announce declining to forward-progress test
torture: Don't leak shuffle_tmp_mask when shuffler kthread fails to start
rcutorture: Use this_cpu_inc() for rcu_torture_count[] and rcu_torture_batch[]
rcutorture: Make RCU Tasks Trace track Reader Batches
rcutorture: Test RCU Tasks Trace GP implying RCU GP
rcutorture: Add a stall_only module parameter
rcutorture: Add nwriters module parameter
rcutorture: Use task_state_to_char() for task-state reporting
rcutorture: Use cpumask_next_wrap() in rcu_torture_preempt()
rcutorture: Test RCU readers from hardware interrupt handlers
rcutorture: Check for immediate deboosting at reader end
srcu: Queue sdp->work when the delay timer is successfully deleted
rcu-tasks: Convert cond_resched_tasks_rcu_qs() to static inline
rcu-tasks: Fix some comments for call_rcu_tasks() and call_rcu_tasks_rude()
rcu-tasks: Rename tasks_rcu_exit_srcu_stall_timer to tasks_rcu_exit_stall_timer
rcu: Mark interrupts-enabled accesses to rdp->cpu_no_qs.s
rcu: Reduce stack usage in show_rcu_gp_kthreads()
rcu: Mark accesses to ->rcu_urgent_qs and ->rcu_need_heavy_qs
...
|
|
Pull nfsd updates from Chuck Lever:
- CB_NOTIFY support for NFSD's NFSv4.1 directory delegations
The server used to recall a delegation as soon as the directory
changed. NFSD now watches delegated directories through fsnotify and
reports adds, removes, renames, and directory attribute changes,
carrying the filehandle and attributes of the affected entry, so
clients can keep their caches. Some of the NOTIFY4 flags come from
RFC 8881bis (Jeff Layton)
- Continued netlink work
A new server-stats-get operation reports what /proc/net/rpc/nfsd
publishes, plus NFSv4 callback counts, and SUNRPC now keeps its
per-procedure call counts per network namespace, so a container sees
its own numbers. nfsstat reads all of this over netlink, with a
procfs fallback for older kernels (Jeff Layton)
- Remove SUNRPC service thread pool mode selection
Per node is the right choice on any host we run today, so the auto,
global, and percpu modes have been removed. A single-node host still
gets one pool. A multi-NUMA host now gets a pool per node.
sunrpc.pool_mode accepts the old names but no longer selects
anything.
- Bug fixes, clean-ups, and small optimizations:
- async COPY offload rework (Jeff Layton)
- more use-after-free fixes in the NFSv4 state revocation paths
- percpu counter contention removed from the reply cache and IO
accounting
- a long list of hardening fixes (Chris Mason)
Sincere thanks to all contributors, reviewers, testers, and bug
reporters who participated in the v7.3 NFSD development cycle.
* tag 'nfsd-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (182 commits)
nfsd: export NFSv4 callback op stats via netlink
nfsd: count NFSv4 callback operations per netns
sunrpc: remove unused svc_version vs_count field
nfsd: implement server-stats-get netlink handler
sunrpc: use per-net counts in svc_seq_show()
sunrpc: add per-netns per-procedure call counts to svc_stat
NFSD: Document reply_cache_stats ABI
NFSD: Eliminate percpu counter contention in IO byte accounting
NFSD: Eliminate percpu counter contention in reply cache statistics
NFSD: Eliminate percpu counter contention in DRC memory accounting
NFSD: Fix off-by-one in DRC bucket pruning limit
NFSD: Relocate NFSv4 "supported attributes" to new header
NFSD: Relocate nfsd4_set_netaddr()
NFSD: Relocate nfsd_user_namespace()
NFSD: Move struct readdir_cd
NFSD: Move the export.h include from nfsd.h to auth.c
NFSD: Remove '#include "nfsd.h"' from fs/nfsd/cache.h
NFSD: include "netns.h"
NFSD: Explicitly include "stats.h"
NFSD: Make "stats.h" self-contained
...
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a not-too-busy cycle for docs; here's the highlights:
- A (hopefully) consensus change to our LLM-attribution requirements,
removing the specific model name from the Assisted-by tag
- A couple of new realtime documents
- Various docs-build-system fixes
- Ongoing work with the Chinese, Portuguese, and Japanese
translations
...and lots of typo fixes, grammar tweaks, etc"
* tag 'docs-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (85 commits)
Doc: admin-guide: pm: Remove unnecessary backticks and fix a spell
Documentation: Extend the real-time hardware bits with some firmware bits
docs: pt_BR: Reorganize process/index.rst to follow english structure
docs: conf.py: fix the 'utf-8' typo
doc tools: fix 'path' typos
Documentation: real-time: Add kernel configuration guide
docs: python: abi_regex: convert adjacent index placeholders
docs: python: abi_regex: catch the right exception for a bad regex
docs: sphinx-build-wrapper: include localversion in kernel version string
Documentation: html: adjust sidebar section titles styling
Documentation: html: show sections in the sidebar
checkpatch.pl: adapt to new Assisted-by: format
MAINTAINERS: update Traditional Chinese documentation maintainers
docs: pt_BR: process: Translate CVE documentation
docs: pt_BR: translate the management-style.rst to Brazilian Portuguese
docs: xforms_lists: support DEFINE_IDTENTRY_IRQ()
coding-assistants: simplify attribution
docs: translations: pt_BR: translate email-clients.rst
docs: pt_BR: process: Translate the security-bugs.rst
doc:it_IT: align doc-guide translation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"ARM SMMUv2:
- Device-tree binding updates for Qualcomm Eliza, Maili, Shikra and
IPQ9650 SoCs
- Add support for Qualcomm SM8450
- Numerous fixes for lifetime and ordering issues found by Sashiko in
the Qualcomm driver
ARM SMMUv3:
- Fix interrupt type in device-tree binding example for NVIDIA CMDQV
- Numerous fixes for issues identified by Sashiko in the NVIDIA CMDQV
driver
- Work around TLB erratum T264-SMMU-3 on Tegra264 by repeating the
invalidation sequence
- Add support for HAFT (hardware access flag in table entries) when
using SVA
- Probe for 52-bit addressing with a page size smaller than 64k
('DS') but don't do anything with it for now
- Minor driver improvements (remove sort_nonatomic(), use
readl_relaxed_poll_timeout_atomic(), fix IOPF teardown ordering)
Intel VT-d:
- Consolidation of complex enablement logic into a clean,
priority-based state machine
- Support for the DMA_REMAP_OPT_OUT flag from the VT-d v5.2
specification
- An update to cache_tag_flush_devtlb_psi() to use full-range
constants instead of modifying shared variables for
CACHE_TAG_NESTING_DEVTLB
- A fix for the UCTP context-table slot when copying root entries
- Fixes for several pre-existing issues reported by Sashiko
- General code cleanup and refinement
AMD IOMMU:
- Add SNP page-mode-0 support, enabling passthrough, v2 DMA page
tables and host SVA on supporting systems
- Fix invalid PPR handling, COMPLETE_PPR responses and guest-mode
reporting
- Improve Southbridge IOAPIC validation and remove the dependency on
hard-coded device IDs
- Fix PCI-device lifetime, debugfs and diagnostic issues
IOMMU core and IOMMUFD:
- Restore serialization of the shared MSI-page list
- Fix SVA-handle publication and several IOMMUFD reference and error
path leaks
- Return the expected zero result for invalid generic page-table
translations
- Allocate per-CPU IOVA magazines lazily to reduce memory use on
large systems
PCI ATS:
- Make VF support checks account for the associated PF and validate
that VF and PF Smallest Translation Unit settings agree
Platform drivers:
- Fix Qualcomm runtime-PM, probe unwind, fault reporting and page
table initialization races
- Rework Rockchip state handling and fix clock, probe and stale-fault
handling
- Fix smaller issues in the MSM and MediaTek drivers
Device-tree bindings:
- Add new Qualcomm SMMU compatibles, convert the OMAP IOMMU binding
to YAML, and fix the Tegra264 CMDQV interrupt example
Various smaller cleanups, documentation fixes and a Rust IOMMU
safety/readability improvement"
* tag 'iommu-updates-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (93 commits)
iommu/amd: Add SNP page mode 0 support
iommu/amd: Fix GN bit setting in COMPLETE_PPR_REQUEST command
iommu/amd: Rate limit INVALID_PPR_REQUEST error logging
iommu/amd: Fix missing CMD_COMPLETE_PPR response for invalid PPR requests
iommu/amd: Introduce PPR_TAG_LAST_PAGE() macro
iommu/amd: Fix incorrect device ID in invalid PASID error message
iommu/vt-d: Flush context cache with correct SID when tearing down aliases
iommu/vt-d: Tear down scalable-mode context on probe failure
iommu/vt-d: Fix iopf_refcount leak on RID domain replacement
iommu/vt-d: Clear Present bit before tearing down copied context entry
iommu/vt-d: Fix copied_tables bitmap leak on error in copy_translation_tables
iommu/vt-d: Cache max domain ID to avoid redundant calculation
iommu/vt-d: Support the new DMA_REMAP_OPT_OUT flag bit
iommu/vt-d: Remove dmar_disabled
iommu/vt-d: Remove the 'force_on' variable
iommu/vt-d: Call dmar_can_force_on() for tboot opt-in
iommu/vt-d: Use dmar_can_force_on() for platform opt-in
iommu/vt-d: Consolidate dmar policy management and force_on logic
iommu/vt-d: Remove dead code when CONFIG_INTEL_IOMMU is not set
iommu/vt-d: Force requesting ACS when tboot is enabled
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 alternatives update from Borislav Petkov:
- Remove the smp_locks alternatives machinery which was used to patch
out lock prefixes when running a SMP kernel on a uniprocessor machine
* tag 'x86_alternatives_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternative: Drop smp_locks glue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MCE update from Borislav Petkov:
- Add mce=print_all to the mce= kernel cmdline params documentation
* tag 'ras_core_for_v7.3_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Document the mce=print_all command line parameter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a reasonable amount of stuff here, including a bunch of
updates to the perf PMU drivers and some MPAM updates to expose the
memory bandwidth counters via resctrl.
On the architecture side, some highlights include support for BBML3
and steps towards support for an architectural NMI solution, all
wrapped up in a web of fixes for latent issues identified by Sashiko.
ACPI:
- Combine reads of AMU counters into a single FFH feedback counter op
Confidential computing:
- Fix smp_processor_id() in preemptible context when retrieving an
attestation token inside a realm
- Convert pKVM over to a "CC platform"
- Clean-up our SWIOTLB configuration in preparation for reworking the
handling of encrypted/decryped DMA buffers in the dma-mapping tree
CPU errata handling:
- Work around broken device memory ordering on NVIDIA Olympus cores
- Fix broken 'nospectre_bhb' command-line option
- Select the idle loop backend instruction on the command-line
CPU features:
- Replace our BBML2-noabort feature with the new architectural BBML3
feature
- Disable in-kernel BTI for recent versions of Clang due to issues
with livepatch that are still being investigated
- Clean-up documentation describing which ID register fields are
exposed to userspace
Interrupts:
- Preliminary work towards supporting FEAT_NMI, which cleans up our
IRQ entry code and fixes some latent issues with pseudo-NMI
- Support for an SDEI backend to trigger an NMI backtrace
Memory management:
- Treat all devices as coherent when CLIDR_EL1.LoC == 0
- Fix no-map handling of sub-page-sized regions
- Second attempt at unmapping the linear aliases of the kernel data
and bss sections
- Fix EFI runtime calls when software-PAN is enabled
Miscellaneous:
- Add Mark Rutland as a reviewer!
- Tidy-up our futex cmpxchg logic when using the new LSUI
instructions
- Drop the requirement on DYNAMIC_FTRACE_WITH_CALL_OPS when
selecting HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
- Fix a false-positive KCSCAN splat in the delay loop
- Use a portable typedef for 128-bit scalar types in our UAPI headers
- Non-critical fixes for Sashiko reports all over
MPAM:
- Hook MPAM memory bandwidth counters into resctrl's counter
assignment interface
- Fix a quirk in the MPAM bandwidth counting on Nvidia T241 so that
it also applies to 63 bit counters
Perf:
- Workarounds for hardware issues in the CMN-S3 PMU (Graviton 5) and
CPU PMU (NVIDIA Olympus again!)
- Add support for the DDR PMU on Marvell CN20K SoCs
- Add support for Picoheart implementations of the DCW PCIe PMU
- Add support for Channel/Rank/Bank filtering in the CXL PMU driver
- Add support for 64-bit counters in the CSPMU device
- Add support for revision 2 of the CMN S3 PMU
Ptrace:
- Fix a decade-old bug in our handling of seccomp and tracing on
syscall entry
- Fix regset handling for inactive SVE and SSVE registers
Selftests
- Add some tests for the decade-old bug that we just tried to fix in
our syscall entry path
- Fix SVE test crash on SME-only CPUs"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (95 commits)
arm64/efi: Avoid voluntary preemption with efi_mm installed
arm64: bti: Disable in-kernel BTI with recent versions of Clang
arm64: entry: Avoid unnecessary local_irq_disable() on kernel exit
irqchip/gic-v3: make the unmasking of pseudo-NMIs explicit when handling IRQs
arm64: Disable KCSAN instrumentation in delay.o
arm_mpam: Disable driver unbind to avoid UAF
arm_mpam: Fix a NULL pointer dereference on unbinding after an error interrupt
perf: arm_pmuv3: Zero initialize hw_id branch stack field
arm64: mm: Unmap kernel data/bss entirely from the linear map
iommu/arm-smmu-v3-sva: Use system_supports_bbml3() to detect CPU feature
perf/arm-cmn: Support CMN S3 r2
perf/arm-cmn: Plumb in new filter types
perf/arm-cmn: Refactor event filter data
perf/arm-cmn: Refactor event filter programming
perf/arm-cmn: Rename filter variables for clarity
arm64: mm: fix accidental linear mapping of no-map reserved memory
tools: Ensure tools copy of linux/filter.h exports the UAPI
kselftest/arm64: Fix abi test compilation errors
arch: arm64: add early_param idle=<wfi|yield|nop>
arm64: entry: mask DAIF before returning from C EL1 handlers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux
Pull kexec updates from Mike Rapoport:
- Deduplicate crash memory allocation and the exclusion of reserved
crash kernel regions from architecture specific code into a generic
crash_prepare_headers() and enable crashkernel CMA reservation on
arm64 and riscv reservation on arm64 and riscv.
- Skip purgatory checksum verification when the kexec segments cannot
be corrupted by DMA, which saves about 250ms on kexec.
- Replace __ASSEMBLY__ with the compiler provided __ASSEMBLER__ in
include/linux/kexec.h.
- Fix a keyring refcount imbalance in the kdump kernel's dm-crypt key
restore path, which over-dropped the user keyring reference when
more than one key was restored.
* tag 'kexec-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
crash_dump: release keyring reference at the correct time
kexec: Replace __ASSEMBLY__ with __ASSEMBLER__ in header file
kexec_file: skip checksum verification when safe
riscv: kexec_file: Add support for crashkernel CMA reservation
arm64: kexec_file: Add support for crashkernel CMA reservation
powerpc/kexec_file: Use crash_exclude_core_ranges() helper
LoongArch: kexec_file: Use crash_prepare_headers() helper to simplify code
riscv: kexec_file: Use crash_prepare_headers() helper to simplify code
x86/crash: Use crash_prepare_headers() helper to simplify code
arm64: kexec_file: Use crash_prepare_headers() helper to simplify code
crash: Add crash_prepare_headers() to exclude crash kernel memory
powerpc/crash: sort crash memory ranges before preparing elfcorehdr
riscv: kexec_file: Fix crashk_low_res not exclude bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"As has been the case for quite some time, this set of changes is
dominated by cpufreq updates including intel-pstate and amd-pstate
driver updates, minor fixes and cleanups of other assorted cpufreq
drivers, schedutil governor updates, fixes of the Rust bindings, new
hardware support (IPQ5210 in qcom-nvmem), and some updates of self
tests related to cpufreq.
The second largest group of changes are cpuidle updates consisting of
intel_idle driver updates and ACPI processor idle driver updates, both
mostly related to ACPI _LPI support.
There are also updates related to system sleep, mostly in the
hibernation core code, two operating performance points (OPP) updates,
one runtime PM framework update, one power capping update, and some
tools updates including the addition of ACPI CPPC support to cpupower.
Specifics:
- Minor fixes and cleanups in assorted cpufreq drivers (Dan
Carpenter, Guru Das Srinagesh, Haoxiang Li, Karl Mehltretter, Sasha
Finkelstein, and Pan Chuang)
- Fix cpufreq table creation and bios_limits() callback in the Rust
bindings (Priya Bala Govindasamy)
- Add IPQ5210 support to qcom-nvmem driver (Varadarajan Narayanan)
- Adjust the .adjust_perf() cpufreq driver callback to allow the
maximum performance value to be passed to drivers and update the
intel_pstate driver to use it (Rafael Wysocki)
- Set policy->cur to the actual requested frequency in the
intel_pstate driver when the performance policy is used (Rafael
Wysocki)
- Simplify HWP handling on Broadwell processors in intel_pstate
(Rafael Wysocki)
- Fix setting minimum P-state at init time in intel_pstate (Rafael
Wysocki)
- Consolidate frequency values computation in intel_pstate and clean
up code in that driver (Rafael Wysocki)
- Add missing kernel-doc descriptions for structure and union members
in the amd-pstate driver (David Vernet)
- Handle missing policy in dynamic EPP callbacks in the amd-pstate
driver (EDAMAMEX)
- Introduce EXPORT_SYMBOL_FOR_PSTATE_UT() to export amd-pstate driver
symbols to the amd-pstate-ut subdriver (K Prateek Nayak)
- Add dynamic EPP as an "energy_performance_preference" mode in
amd-pstate, remove the "amd_dynamic_epp" kernel command line option
and the "dynamic_epp" sysfs attribute, and update the dynamic_epp
documentation accordingly (K Prateek Nayak)
- Add unit tests for CPPC Performance Priority and the "dynamic" EPP
mode in the amd-pstate driver (K Prateek Nayak)
- Set min_limit_freq based on bios_min_perf in amd-pstate and remove
the defensive check for bios_min_perf from it (K Prateek Nayak)
- Fix EPP return type and handle errors in amd-pstate during
initialization, toggle auto_sel in active mode on shared memory
systems, and cache the firmware programmed EPP value (Marco
Scardovi)
- Skip tests in amd-pstate-ut if the amd-pstate driver is not in
active use (Qianheng Peng)
- Replace sprintf() with sysfs_emit() in sysfs show in the cpufreq
schedutil governor and fix a self-contradictory comment in
sugov_iowait_apply() (Zhongqiu Han)
- Fix the usage example for the sampling_rate tunable of the ondemand
cpufreq governor in admin-guide (wangxiaodong)
- Avoid using deep idle states during initialization in the
intel_idle driver to work around device handling issues (Rafael
Wysocki)
- Fix and refactor the ACPI processor driver code related to ACPI
_LPI support and add ACPI _LPI support to intel_idle based on that
ACPI processor driver update (Rafael Wysocki)
- Backup and restore governor for cpufreq sptests (Yiwei Lin)
- Remove unnecessary sudo from quick_shuffle() and remove unused
local variables from switch_show_governor() in cpufreq selftests
(Jinseok Kim)
- Rename the PM core module parameter prefix to "pm" and allow the PM
transition (DPM) watchdog to be disabled by default (Tzung-Bi Shih)
- Fix off-by-one in wakelocks number limit check in the system sleep
sysfs interface (Haowen Tu)
- Remove kernel-doc markings from helper descriptions in the core
hibernation code (Adi Nata)
- Use %pe to print error pointer values in the hibernation core
(Ronan Marchal)
- Fix memory leak in snapshot_write_next() error path (Malaya Kumar
Rout)
- Delay allocating and linking the next swap_map_page in the
hibernation image saving code until another image page actually
needs to be recorded (Haesung Kim)
- Fix cleanup ordering around scope-based pointers in OPP (Gregor
Herburger).
- Use clk_get_optional() for optional clocks in OPP (Praveen Talari).
- Stop setting runtime_error on runtime resume callback failures to
allow drivers to recover from resume issues (Praveen Talari)
- Handle PMU registration failure during probe in the intel_rapl_tpmi
driver (Sumeet Pawnikar)
- Avoid optional imports in intel_pstate_tracer unless they are
really needed (Yousef Alhouseen)
- Add generic CPPC performance display to the cpupower utility, build
and call CPPC information on non-AMD processors, make cpupower
print kernel and hardware frequency information, and add libm to
cpupower for generic CPPC view (Jeremy Linton)
- Remove conditional return with no effect from cpupower (Sang-Heon
Jeon)"
* tag 'pm-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
cpufreq: imx6q: fix out-of-bounds write when probed more than once
cpufreq: imx6q: fix devres accumulation across driver rebind
rust: cpufreq: Fix temporary write in Registration::bios_limit_callback
rust: cpufreq: Add CPUFREQ_TABLE_END as last table entry in TableBuilder::to_table
opp: Use clk_get_optional() to avoid leaving opp_table->clk as an error pointer
intel_idle: Avoid using deep idle states during initialization
cpupower: remove conditional return with no effect
cpufreq: intel_pstate: Adjust policy->cur in active mode to policy
cpufreq/amd-pstate: Document missing kernel-doc members
cpufreq/amd-pstate-ut: Add unit test for CPPC Performance Priority
cpufreq/amd-pstate-ut: Add unit test for "dynamic" EPP mode
cpufreq/amd-pstate: Reduce the scope of exported symbols
Documentation/amd-pstate: Update dynamic_epp documentation with new behavior
cpufreq/amd-pstate: Remove "amd_dynamic_epp" cmdline and "dynamic_epp" sysfs
cpufreq/amd-pstate: Add dynamic EPP as an "energy_performance_preference" mode
cpufreq/amd-pstate: Extract platform profile to EPP conversion into a helper
cpufreq/amd-pstate: Remove the defensive check for bios_min_perf
cpufreq/amd-pstate: Set min_limit_freq based on bios_min_perf
powercap: intel_rapl_tpmi: Handle PMU registration failure during probe
PM: sleep: Allow disabling DPM watchdog by default
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v7.3
1. Advertise already-supported capabilities.
2. Some bug fixes about timer and MMIO.
3. Some hardening about interrupt injection.
4. Replace kvm_err() with kvm_pr_unimpl().
5. Add FPU/LSX/LASX test cases for selftests.
|
|
This commit adds a stall_only module parameter that shuts off all
rcutorture kthreads other than the RCU CPU stall-warning test kthreads.
The purpose of this is to test production applictions' reactions to
CPU stalls, and with minimal additional overhead. Or you can omit the
stall-warning tests as well and get a heavy no-op, your choice!
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Believe it or not, there are people who would like to run rcutorture
without actually torturing RCU. For example, some people would like to
induce various types of stall warnings without placing any unnecessary
additional overhead on their systems running in production. And
rcutorture provides the stall_cpu, stall_cpu_holdoff, stall_no_softlockup,
stall_cpu_irqsoff, stall_cpu_block, and stall_cpu_repeat module parameters
in order to allow the user to force numerous types of stalls. In addition,
rcutorture provides a great number of other module parameters to allow the
user to reduce other overhead.
But unfortunately, there is no way to turn of the rcu_torture_writer()
portion of this torture test, which on my x86 laptop consumes somewhere
between 40% and 45% of a CPU. Although this is quite lightweight for a
torture test, it is not welcome on systems running production workloads.
This commit therefore adds an nwriters module parameter that defaults
to 1 but can be set to 0 in order to disable the rcu_torture_writer()
portion of the torture test, but that cannot be set to any other value
(that is what the fakewriters module parameter is for!). This reduces
the overhead to well under 1% of a CPU, which is much more likely to be
compatible with production workloads.
Reported-by: Breno Leitao <leitao@debian.org>
Reported-by: Puranjay Mohan <puranjay@kernel.org>
Reported-by: Usama Arif <usama.arif@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Under heavy concurrent DMA traffic on CoCo VMs, inc_used_and_hiwater()
performs an atomic_long_add_return() plus a CAS loop on the global
used_hiwater, and dec_used() performs an atomic_long_sub() on total_used.
All CPUs contend on the same cacheline, causing measurable throughput
degradation at scale.
Historically these counters were only compiled in under CONFIG_DEBUG_FS,
which means production kernels with debugfs paid the atomic overhead
unconditionally. Make the tracking boot-time opt-in instead so that it
is disabled by default with near-zero overhead via static_call, and can
be enabled via "swiotlb=track_hiwater" parameter on demand for debugging.
Note that when CONFIG_DEBUG_FS is enabled but hiwater tracking is disabled,
the "io_tlb_used" metric reports an approximate value rather than an
instantaneously exact one.
Suggested-by: Fan Du <fan.du@intel.com>
Signed-off-by: Jun Miao <jun.miao@intel.com>
Co-developed-by: Fan Du <fan.du@intel.com>
Signed-off-by: Fan Du <fan.du@intel.com>
Tested-by: chenhuguanshen <chenhgs@chinatelecom.cn>
Signed-off-by: chenhuguanshen <chenhgs@chinatelecom.cn>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20260812070459.637077-1-frankchen158@126.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
'qualcomm/msm', 'rockchip', 'ti/omap', 'riscv', 'intel/vt-d', 'amd/amd-vi', 'core' and 'typos' into next
|
|
With the recently found INVLPGB / TLBSYNC issue, there has been some
interest in disabling INVLPGB-based TLB flushing, in order to rule out
that CPU issue as a cause of userspace crashes.
Add a kernel command line option to control the TLB flushing behavior.
If the need arises, we will add a "tlbi=broadcast" for the case when TLB
invalidation broadcasts need to be explicitly selected, but this is not
needed now yet.
[ bp: Rewrite commit message, move to cpu/common.c, add documentation. ]
Fixes: 767ae437a32d ("x86/mm: Add INVLPGB feature and Kconfig entry")
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/20260729204341.3eb0b5ea@fangorn
|
|
The SVC_POOL_AUTO/GLOBAL/PERCPU/PERNODE pool mode selection machinery
was added when NUMA was new and the right default was unclear. The
default has always been "global" (a single pool for the whole service);
the other modes were only used when an admin explicitly set the
pool_mode parameter or asked for "auto", which then picked a mode from
the host topology. Today, pernode is the right choice everywhere:
- On multi-NUMA hosts, it gives one pool per node with proper thread
affinity and NUMA-local memory allocation.
- On single-node hosts, pernode degenerates to exactly one pool,
identical to the old "global" mode -- svc_pool_for_cpu() short-
circuits when sv_nrpools <= 1, no CPU affinity is set, and memory
is allocated from the single node.
The percpu mode (one pool per CPU) created excessive pools relative to
the number of threads most deployments run, and was only auto-selected
in a narrow case (single node, >2 CPUs).
Note that this changes the default behaviour on multi-NUMA hosts: a
service that previously ran with a single global pool now gets one pool
per NUMA node by default. This in turn means a host running fewer
threads than it has NUMA nodes can end up with pools that have no
threads. svc_pool_for_cpu() already falls back to a populated pool in
that case, so transports are still serviced.
Remove the SVC_POOL_* enum, mode selection heuristic,
svc_pool_map_init_percpu(), and all mode-based switch statements.
Simplify pool map functions to always use the pernode path. If pool
map allocation fails, svc_pool_map_get() now returns 0 and service
creation fails, rather than silently falling back to a single global
pool.
With the mode check gone, svc_pool_map_get_node() would dereference the
shared pool_to[] for every service that starts a thread. Only services
created via svc_create_pooled() hold a map reference that keeps that
array allocated, so gate the lookup in svc_new_thread() on sv_is_pooled:
unpooled services (e.g. lockd, the NFS callback) use NUMA_NO_NODE and
never consult the map. The kmalloc_node() callers in
svc_prepare_thread() already accept NUMA_NO_NODE, but __folio_alloc_node()
requires a valid node id, so resolve NUMA_NO_NODE to numa_mem_id() for
the scratch folio allocation.
The module parameter and netlink interfaces are preserved for backward
compatibility:
- Writing any of the four documented mode names still succeeds silently
- Reading always returns "pernode"
- Writing to the module parameter emits a deprecation notice
Update Documentation/admin-guide/kernel-parameters.txt to mark the
pool_mode parameter deprecated and describe the new behaviour.
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260706-sunrpc-pool-mode-v5-2-6c4ee7cd89aa@kernel.org
Signed-off-by: Chuck Lever <cel@kernel.org>
|
|
Overriding the idle mechanism might be useful for debugging and performance
testing. Add a cmdline parameter for it, similar to the existing idle=
parameter already present for the x86 and ppc architectures.
It is also useful on platforms where the WFI instruction misbehaves,
such as Apple Silicon SoCs. Generally, a misbehaving instruction should
be treated as an erratum and patched using the alternatives framework.
However, in the Apple Silicon case we need more flexibility because it is
difficult to detect whether the erratum applies. For example, Linux VMs
inside macOS have the same MIDR and may even seem like they're running
in EL2 in the case of NV, but should continue using WFI (it's trapped and
handled correctly by the hypervisor there). Thus, we prefer to
let the m1n1 bootloader add the idle=nop parameter[1].
Link[1]: https://lore.kernel.org/all/99b69262-e54b-424e-baa2-96ef7013b87a@kernel.org/
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Yureka Lilian <yureka@cyberchaos.dev>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The smsc-ircc2 module parameters reference drivers/net/irda/
smsc-ircc2.c, which was removed along with the entire IrDA stack in
commit d64c2a76123f ("staging: irda: remove the irda network stack
and drivers").
Signed-off-by: Anuj Bolewar <bolewara@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260802-docs-remove-smsc-ircc2-params-v1-1-91b302e90cce@gmail.com>
|
|
Certain third-party USB game controllers exposing (or spoofing) an Xbox
360-compatible interface (VID:PID 045e:028e) fail to enumerate under Linux.
The device disconnects from the bus without responding to the initial
GET_DESCRIPTOR(CONFIGURATION) request, and the kernel logs 'unable to read
config index 0 descriptor/start: -71'.
The device then falls back to a secondary Android HID mode (with a
different VID:PID), losing XInput functionality including rumble support.
The failure reproduces across multiple machines, host controller types, and
kernel versions including current mainline and LTS. The device enumerates
correctly and remains in XInput mode under Windows. Notably, the device
enumerates correctly in Android mode when the same 9-byte request
is issued for that mode's configuration descriptor, confirming the firmware
bug is specific to the XInput mode.
usbmon traces from Linux and Wireshark/USBPcap traces from Windows are
identical up to the point of failure, with no visible protocol-level
difference explaining the divergence. The root cause was identified when
Michal Pecio discovered via a QEMU bus-level capture that Windows does not
use wLength=9 for the initial config descriptor request; it uses
wLength=255. Alan Stern subsequently confirmed this with a bus
analyzer on a different USB 2.0 device, and Michal verified the behavior
goes back to Windows 95 OSR2.1.
So, add a new quirk flag USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE which causes
usb_get_configuration() to issue a 255 byte sized configuration request
instead of USB_DT_CONFIG_SIZE (9) for the initial
GET_DESCRIPTOR(CONFIGURATION) request, mimicking long-standing Windows
behavior.
This patch intentionally does not add any new VID:PID entries using this
quirk. Some affected Xbox 360-compatible controllers spoof Microsoft's
VID:PID, while genuine Microsoft controllers already enumerate correctly
and do not require this quirk. Other affected clone devices use their own
VID:PID pairs and can be added individually as they are identified.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Closes: https://lore.kernel.org/linux-usb/CAFgddh+JWdT4LLwMc5qjM8q_pBu-fRo2qADR5ovAKoGHWMQrRw@mail.gmail.com/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Nikhil Solanke <nikhilsolanke5@gmail.com>
Link: https://patch.msgid.link/20260728195158.65162-2-nikhilsolanke5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In general it might be nice to have the ability to disable hardware
access/dirty bit management for debugging or performance comparison
purposes without having to rebuild the kernel. However once FEAT_HAFT
comes into the picture we also start to have a real functional concern
where the decision to use HAFT based on the boot CPUs can prevent SVA
or late-onlining if SMMUs/CPUs are later found to lack HAFT support.
To that end, add the appropriate MMFR1 override, with an easy "nohaft"
alias for the significant case, partly since the feature/field naming
isn't the most obvious, but also so it could potentially be redirected
in future if someone wanted to attempt a higher-level means of turning
off just HAFT usage independently from FEAT_HDBSS.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add an eager_page_split module parameter for RISC-V KVM, following
the same approach as on x86. This parameter controls whether eager
page splitting is enabled. The default value is on.
When eager page splitting is enabled, KVM proactively splits large
pages (huge pages) into smaller pages when needed for dirty logging
or other operations. Disabling it can be beneficial for VM workloads
that rarely perform writes, or that only write to a small region of
memory, as it allows huge pages to remain intact for read accesses.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260731091215.1549430-6-wang.yechao255@zte.com.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Introduce the "dpm_watchdog_enabled" module parameter to allow the DPM
watchdog to be enabled or disabled at boot time and runtime.
Additionally, introduce the CONFIG_DPM_WATCHDOG_ENABLED Kconfig option
to set the default value of the module parameter at compile time.
The primary motivation for this configurability resolves around Android
GKI (Generic Kernel Image). We want to enable CONFIG_DPM_WATCHDOG in
the GKI so the feature is available. However, because the GKI is shared
across many different devices, we don't want to inadvertently affect
devices that are unaware of this feature. This provides a way to
compile it in, but keep it disabled by default for those devices via the
kernel command line or module parameters.
To maintain backward compatibility, CONFIG_DPM_WATCHDOG_ENABLED relies
on `default y`. Previously, the DPM watchdog was always active if
CONFIG_DPM_WATCHDOG was set. Defaulting this new option to 'y' ensures
that the behavior remains unchanged for existing users and defconfigs
when they upgrade.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260720030821.2780257-3-tzungbi@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The mce=print_all command line option is supported but has never
been documented. Add it.
Suggested-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Shreshth Srivastava <shreshth.srivastava@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20260723013730.3033-1-shreshth.srivastava@intel.com
|
|
Add a few missing ']'s and a ')'.
Signed-off-by: Manuel Ebner <manuelebner@mailbox.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260703080806.223782-2-manuelebner@mailbox.org>
|
|
instead of the "50%"
The documentation for 'efi_no_storage_paranoia' incorrectly states
the kernel cannot use "more than 50%" of the EFI variable storage.
This percentage-based explanation has been outdated since commit
f8b8404337de ("Modify UEFI anti-bricking code") introduced a fixed 5KB
minimum reserve threshold (EFI_MIN_RESERVE) in
arch/x86/platform/efi/quirks.c. At that time, the documentation was not
updated to reflect this change.
Update the documentation to reflect the "5KB" instead of the "50%".
Signed-off-by: Koki Iwata <iwata.koki@fujitsu.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260706050534.1653916-1-iwata.koki@fujitsu.com>
|
|
Add missing ']' and replace 'neuer Name' with 'new Name'.
Signed-off-by: Manuel Ebner <manuelebner@mailbox.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260629110812.69420-2-manuelebner@mailbox.org>
|
|
This was there to be able to patch out locking instructions when running
a SMP kernel build on a UP CPU. The times are long gone when single-CPU
x86 machines were relevant so drop that machinery and simplify the code
considerably.
LOCK_PREFIX needs to stay for when one wants to do a UP build for
whatever reason. That'll go away when CONFIG_SMP becomes unconditional.
Kill a bunch of leftover, unused prototypes while at it.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://lore.kernel.org/r/20260328081634.797552-1-rppt@kernel.org
|
|
The mempool subsystem historically wrapped its debugging logic inside an
merely defines compile-time defaults for SLUB and caused two flaws:
1. On production kernels where CONFIG_SLUB_DEBUG=y but
CONFIG_SLUB_DEBUG_ON=n, mempool debugging was completely compiled out
at compile time.
2. On kernels with CONFIG_SLUB_DEBUG_ON=y, mempool debugging stayed active
even if a user explicitly disabled slub debugging at boot time.
Clean up this mess by removing the #ifdef and switching to a runtime static
key (mempool_debug_enabled), allowing mempool debugging to be toggled
cleanly via its own boot parameter.
Suggested-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Harry Yoo <harry@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hao Li <hao.li@linux.dev>
Cc: Christoph Lameter <cl@gentwo.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Usama Arif <usama.arif@linux.dev>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Link: https://patch.msgid.link/20260604110318.2089-1-lirongqing@baidu.com
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
Commit 35c18f2933c5 ("Add a new optional ",cma" suffix to the
crashkernel= command line option") and commit ab475510e042 ("kdump:
implement reserve_crashkernel_cma") added CMA support for kdump
crashkernel reservation. This allows the kernel to dynamically allocate
contiguous memory for crash dumping when needed, rather than permanently
reserving a fixed region at boot time.
So extend crashkernel CMA reservation support to riscv. The following
changes are made to enable CMA reservation:
- Parse and obtain the CMA reservation size along with other crashkernel
parameters.
- Call reserve_crashkernel_cma() to allocate the CMA region for kdump.
- Include the CMA-reserved ranges for kdump kernel to use, which was
already done in of_kexec_alloc_and_setup_fdt().
- Exclude the CMA-reserved ranges from the crash kernel memory to
prevent them from being exported through /proc/vmcore, which was
already done in the crash core.
Update kernel-parameters.txt to document CMA support for crashkernel on
riscv architecture.
Cc: Paul Walmsley <pjw@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Paul Walmsley <pjw@kernel.org> # arch/riscv
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20260629094746.191843-11-ruanjinjie@huawei.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Commit 35c18f2933c5 ("Add a new optional ",cma" suffix to the
crashkernel= command line option") and commit ab475510e042 ("kdump:
implement reserve_crashkernel_cma") added CMA support for kdump
crashkernel reservation.
Crash kernel memory reservation wastes production resources if too
large, risks kdump failure if too small, and faces allocation difficulties
on fragmented systems due to contiguous block constraints. The new
CMA-based crashkernel reservation scheme splits the "large fixed
reservation" into a "small fixed region + large CMA dynamic region": the
CMA memory is available to userspace during normal operation to avoid
waste, and is reclaimed for kdump upon crash—saving memory while
improving reliability.
So extend crashkernel CMA reservation support to arm64. The following
changes are made to enable CMA reservation:
- Parse and obtain the CMA reservation size along with other crashkernel
parameters.
- Call reserve_crashkernel_cma() to allocate the CMA region for kdump.
- Include the CMA-reserved ranges for kdump kernel to use.
- Exclude the CMA-reserved ranges from the crash kernel memory to
prevent them from being exported through /proc/vmcore, which is already
done in the crash core.
Update kernel-parameters.txt to document CMA support for crashkernel on
arm64 architecture.
Tested-by: Breno Leitao <leitao@debian.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20260629094746.191843-10-ruanjinjie@huawei.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Pull NFS client updates from Anna Schumaker:
"New features:
- XPRTRDMA: Decouple req recycling from RPC completion
- NFS: Expose FMODE_NOWAIT for read-only files
Bugfixes:
- SUNRPC:
- Fix sunrpc sysfs error handling
- Fix uninitialized xprt_create_args structure
- XPRTRDMA:
- Harden connect and reply handling
- NFS:
- Fix EOF updates after fallocate/zero-range
- Keep PG_UPTODATE clear after read errors in page groups
- Use nfsi->rwsem to protect traversal of the file lock list
- Prevent resource leak in nfs_alloc_server()
- NFSv4:
- Clear exception state on successful mkdir retry
- Don't skip revalidate when holding a dir delegation and attrs are stale
- pNFS:
- Fix use-after-free in pnfs_update_layout()
- Defer return_range callbacks until after inode unlock
- Fix LAYOUTCOMMIT retry loop on OLD_STATEID
- Reject zero-length r_addr in nfs4_decode_mp_ds_addr
- NFS/flexfiles:
- Reject zero-length filehandle version arrays
- Fix checking if a layout is striped
- Fixes for honoring FF_FLAGS_NO_IO_THRU_MDS
Other cleanups and improvements:
- Remove the fileid field from struct nfs_inode
- Move long-delayed xprtrdma work onto the system_dfl_long_wq
- Convert xprtrdma send buffer free list to an llist
- Show "<redacted>" for cert_serial and privkey_serial mount options"
* tag 'nfs-for-7.2-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (42 commits)
NFS: Use common error handling code in nfs_alloc_server()
NFS: Prevent resource leak in nfs_alloc_server()
NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr
nfs: don't skip revalidate on directory delegation when attrs flagged stale
xprtrdma: Return sendctx slot after Send preparation failure
xprtrdma: Repost Receive buffers for malformed replies
xprtrdma: Sanitize the reply credit grant after parsing
xprtrdma: Fix bcall rep leak and unbounded peek
xprtrdma: Resize reply buffers before reposting receives
xprtrdma: Check frwr_wp_create() during connect
xprtrdma: Initialize re_id before removal registration
xprtrdma: Fix ep kref imbalance on ADDR_CHANGE
xprtrdma: Convert send buffer free list to llist
NFS: correct CONFIG_NFS_V4 macro name in #endif comment
nfs: use nfsi->rwsem to protect traversal of the file lock list
NFSv4.1/pNFS: fix LAYOUTCOMMIT retry loop on OLD_STATEID
nfs: expose FMODE_NOWAIT for read-only files
nfs: add nowait version of nfs_start_io_direct
NFSv4/flexfiles: honor FF_FLAGS_NO_IO_THRU_MDS in pg_get_mirror_count_write
NFSv4/flexfiles: honor FF_FLAGS_NO_IO_THRU_MDS on fatal DS connect errors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys update from Jarkko Sakkinen:
"This contains only bug fixes"
* tag 'for-next-keys-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys: keyctl_pkey: replace BUG with return -EOPNOTSUPP
keys: request_key: replace BUG with return -EINVAL
keys: Pin request_key_auth payload in instantiate paths
keys: prevent slab cache merging for key_jar
keys: Replace strcpy(derived_buf, "AUTH_KEY") with strscpy(..., HASH_SIZE)
KEYS: Use acquire when reading state in keyring search
keys/trusted_keys: mark 'migratable' as __ro_after_init
keys: use kmalloc_flex in user_preparse
KEYS: trusted: Debugging as a feature
KEYS: encrypted: Remove unnecessary selection of CRYPTO_RNG
KEYS: fix overflow in keyctl_pkey_params_get_2()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
- Introduce IMA and EVM post-quantum ML-DSA signature support
ML-DSA signature support for IMA and EVM is limited to sigv3
signatures, which calculates and verifies a hash of a compact
structure containing the file data/metadata hash, hash type, and hash
algorithm. IMA and EVM still calculate the file data/metadata hashes
respectively.
- Introduce support for removing IMA measurement list records stored in
kernel memory
The IMA measurement list can grow large depending on policy, but
removing records breaks remote attestation, unless they are safely
preserved and made available for attestation requests. Until
environments are prepared to preserve the measurement records, a new
CONFIG_IMA_STAGING Kconfig option is introduced to guard against
deletion.
Several approaches for removing measurement list records were
evaluated but rejected due to filesystem constraints, the
introduction of a new critical data record, and locking concerns. Two
methods are being upstreamed: staged deletion with confirmation, and
staged deletion of N records without confirmation. Both methods
minimize the period during which new measurements are blocked from
being appended to the measurement list by staging the measurement
list.
A comparison of the two methods is included in the documentation.
- Some code cleanup, and a couple of bug fixes
* tag 'integrity-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
doc: security: Add documentation of exporting and deleting IMA measurements
ima: Support staging and deleting N measurements records
ima: Add support for flushing the hash table when staging measurements
ima: Add support for staging measurements with prompt
ima: Introduce ima_dump_measurement()
ima: Use snprintf() in create_securityfs_measurement_lists
ima: Mediate open/release method of the measurements list
ima: Introduce _ima_measurements_start() and _ima_measurements_next()
ima: Introduce per binary measurements list type binary_runtime_size value
ima: Introduce per binary measurements list type ima_num_records counter
ima: Replace static htable queue with dynamically allocated array
ima: Remove ima_h_table structure
evm: terminate and bound the evm_xattrs read buffer
integrity: Add support for sigv3 verification using ML-DSA keys
integrity: Refactor asymmetric_verify for reusability
integrity: Check that algo parameter is within valid range
integrity: Check for NULL returned by asymmetric_key_public_key
ima: return error early if file xattr cannot be changed
ima: Fix sigv3 signature handling for EVM_IMA_XATTR_DIGSIG
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- added checks for DMA attributes in the debug code, especially to
ensure that mappings are created and released with matching
attributes (Leon Romanovsky)
- better default configuration for CMA on NUMA machines (Feng Tang)
- code cleanup in dma benchmark tool (Rosen Penev)
* tag 'dma-mapping-7.2-2026-06-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma: map_benchmark: turn dma_sg_map_param buf into a flexible array
dma-contiguous: simplify numa cma area handling
dma-contiguous: add kconfig option to setup numa cma area if not configured explicitly
dma-debug: Ensure mappings are created and released with matching attributes
dma-debug: Feed DMA attribute for unmapping flows too
dma-debug: Record DMA attributes in debug entry
dma-debug: Remove unused DMA attribute parameter
ntb: Use consistent DMA attributes when freeing DMA mappings
ntb: Store original DMA address for future release
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
|
Pull documentation updates from Jonathan Corbet:
"Things have calmed down a bit on the docs front, with no earthshaking
changes this time around:
- Ongoing work on the Japanese and Portuguese translations
- Better integration of the MAINTAINERS file into the rendered
documents, including a search interface
- A seemingly infinite supply of fixes for typos, minor grammatical
issues, and related problems that LLMs find with abandon"
* tag 'docs-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (93 commits)
docs: pt_BR: Translate 3.Early-stage.rst into Portuguese
docs: pt_BR: update "Purpose of Defconfigs" section in maintainer-soc.rst
Documentation: bug-hunting.rst: fix grammar
docs/ja_JP: translate submitting-patches.rst (interleaved-replies)
docs: Fix minor grammatical error
docs/{it_it,sp_SP,zh_CN,zh_TW}: update references to removed CONFIG_DEBUG_SLAB
Documentation: process: fix brackets
Documentation: arch: fix brackets
docs/dyndbg: explain flags parse 1st
docs/dyndbg: update examples \012 to \n
docs: kernel-parameters: Fix stale sticore file paths
docs: real-time: Fix duplicated sched(7) text
docs: kgdb: Fix stale source file paths
docs: sonypi: Fix stale header file path
docs: kernel-parameters: Remove sa1100ir IrDA parameter
iommu: Documentation: rearrange, update kernel-parameters
docs: md: fix grammar in speed_limit description
docs: changes.rst: restore pahole 1.26 minimum (regressed by sort)
Documentation: Fix syntax of kmalloc_objs example in coding style doc
docs: pt_BR: update maintainer-handbooks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the removal of the Hercules monochrome ISA graphics driver and
the corresponding text console driver, there is just the typical
maintanance with smaller driver fixes and cleanups:
Removal of drivers:
- Hercules monochrome ISA graphics adapter driver (Ethan Nelson-Moore)
- Hercules mdacon console driver (Ethan Nelson-Moore)
Changes affecting many drivers at once:
- possible memory leak fixes in various drivers (Abdun Nihaal)
- many conversions to use strscpy() (David Laight)
- Use named initializers in drivers (Uwe Kleine-König)
Code fixes:
- fbcon: don't suspend/resume when vc is graphics mode (Lu Yao)
- modedb: fix a possible UAF in fb_find_mode() (Tuo Li)
- modedb: Fix entry for 1920x1080-60 mode (Steffen Persvold)
- arm: Export acorndata_8x8 font symbol for bootloader (Helge Deller)
- omap2: fix use-after-free in omapfb_mmap (Hongling Zeng)
Cleanups:
- pxa168fb: use devm_ioremap_resource() (Alberto Arostegui)
- provice helpers for fb_set_var() and fb_blank() and fbcon updates
(Thomas Zimmermann)
- fbcon: Use correct type for vc_resize() return value (Jiacheng Yu)
- chipsfb: add missing MODULE_DESCRIPTION() macro (Rahman Mahmutović)
- sunxvr2500: replace printk with device-aware logging functions
(Rahman Mahmutović)
- sm712: Fix operator precedence in big_swap macro (Li RongQing)
- imxfb: Use of_device_get_match_data() (Rosen Penev)
- atmel_lcdfb: Use of_device_get_match_data() (Rosen Penev)
Documentation fixes:
- grvga: Fix CLUT register address offset in comment (Eduardo Silva)
- omap/dss: Fix stale modedb.c path (Costa Shulyupin)
- correct CONFIG_FB_TILEBLITTING macro name in #endif comment (Ethan
Nelson-Moore)"
* tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (43 commits)
fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode
fbdev: modedb: fix a possible UAF in fb_find_mode()
fbdev: s3fb: Use strscpy() to copy strings into arrays
fbdev: sm501fb: Fix buffer errors in OF binding code
fbcon: correct CONFIG_FB_TILEBLITTING macro name in #endif comment
fbdev/arm: Export acorndata_8x8 font symbol for bootloader
fbdev: mmpfb: Use strscpy() to copy device name
fbdev: sisfb: Replace strlen() strcpy() pair with strscpy()
fbdev: rivafb: Use strscpy() to copy device name
fbdev: cyber2000fb: Use strscpy() to copy device name
fbdev: atmel_lcdfb: Use strscpy() to copy device name
fbdev: Do not export fbcon from fbdev
fbdev: Wrap fbcon updates from vga-switcheroo in helper
fbdev: Wrap user-invoked calls to fb_blank() in helper
fbdev: Wrap user-invoked calls to fb_set_var() in helper
fbdev: omap2: fix use-after-free in omapfb_mmap
docs: omap/dss: Fix stale modedb.c path
fbdev: pxa168fb: use devm_ioremap_resource() for MMIO
fbdev: grvga: Fix CLUT register address offset in comment
fbdev: sunxvr2500: replace printk with device-aware logging functions
...
|
|
TPM_DEBUG, and other similar flags, are a non-standard way to specify a
feature in Linux kernel. Introduce CONFIG_TRUSTED_KEYS_DEBUG for trusted
keys, and use it to replace these ad-hoc feature flags.
Given that trusted keys debug dumps can contain sensitive data, harden the
feature as follows:
1. In the Kconfig description postulate that pr_debug() statements must be
used.
2. Use pr_debug() statements in TPM 1.x driver to print the protocol dump.
3. Require trusted.debug=1 on the kernel command line (default: 0) to
activate dumps at runtime, even when CONFIG_TRUSTED_KEYS_DEBUG=y.
Traces, when actually needed, can be easily enabled by providing
trusted.dyndbg='+p' and trusted.debug=1 in the kernel command-line.
Reported-by: Nayna Jain <nayna@linux.ibm.com>
Closes: https://lore.kernel.org/all/7f8b8478-5cd8-4d97-bfd0-341fd5cf10f9@linux.ibm.com/
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Srish Srinivasan <ssrish@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Ingo Molnar:
- CPUID API updates (Ahmed S. Darwish):
- Introduce a centralized CPUID parser
- Introduce a centralized CPUID data model
- Introduce <asm/cpuid/leaf_types.h>
- Rename cpuid_leaf()/cpuid_subleaf() APIs
- treewide: Explicitly include the x86 CPUID headers
- Update to x86-cpuid-db v3.1 (Maciej Wieczor-Retman)
- Continued removal of pre-i586 support and related simplifications
(Ingo Molnar)
- Add Intel CPU model number for rugged Panther Lake (Tony Luck)
- Misc fixes, updates and cleanups by Arnd Bergmann, Chao Gao, Lukas
Bulwahn, Sohil Mehta, Maciej Wieczor-Retman.
* tag 'x86-cpu-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/cpu: Make CONFIG_X86_CX8 unconditional
x86/cpu: Remove unused !CONFIG_X86_TSC code
x86/cpuid: Update bitfields to x86-cpuid-db v3.1
tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.1
x86/cpu: Make CONFIG_X86_TSC unconditional
MAINTAINERS: Drop obsolete FPU EMULATOR section
x86/cpu: Fix a F00F bug warning and clean up surrounding code
x86/cpu: Add Intel CPU model number for rugged Panther Lake
x86/cpuid: Introduce a centralized CPUID parser
x86/cpu: Introduce a centralized CPUID data model
x86/cpuid: Introduce <asm/cpuid/leaf_types.h>
x86/cpuid: Rename cpuid_leaf()/cpuid_subleaf() APIs
x86/cpu: Do not include the CPUID API header in asm/processor.h
Documentation: core-api/cpu_hotplug: Remove stale cpu0_hotplug docs
x86/cpu, cpufreq: Remove AMD ELAN support
x86/fpu: Remove the math-emu/ FPU emulation library
x86/fpu: Remove the 'no387' boot option
x86/fpu: Remove MATH_EMULATION and related glue code
treewide: Explicitly include the x86 CPUID headers
x86/cpu: Remove the CONFIG_X86_INVD_BUG quirk
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"SMP load-balancing updates:
- A large series to introduce infrastructure for cache-aware load
balancing, with the goal of co-locating tasks that share data
within the same Last Level Cache (LLC) domain. By improving cache
locality, the scheduler can reduce cache bouncing and cache misses,
ultimately improving data access efficiency.
Implemented by Chen Yu and Tim Chen, based on early prototype work
by Peter Zijlstra, with fixes by Jianyong Wu, Peter Zijlstra and
Shrikanth Hegde.
- A series to simplify CONFIG_SCHED_SMT ifdef usage (Shrikanth Hegde)
Fair scheduler updates:
- A series to improve SD_ASYM_CPUCAPACITY scheduling by introducing
SMT awareness (Andrea Righi, K Prateek Nayak)
- A series to optimize cfs_rq and sched_entity allocation for better
data locality (Zecheng Li)
- A preparatory series to change fair/cgroup scheduling to a single
runqueue, without the final change (Peter Zijlstra)
- Auto-manage ext/fair dl_server bandwidth (Andrea Righi)
- Fix cpu_util runnable_avg arithmetic (Hongyan Xia)
- Optimize update_tg_load_avg()'s rate-limiting code (Rik van Riel)
- Allow account_cfs_rq_runtime() to throttle current hierarchy
(K Prateek Nayak)
- Update util_est after updating util_avg during dequeue, to fix the
util signal update logic, which reduces signal noise (Vincent
Guittot)
Scheduler topology updates:
- Allow multiple domains to claim sched_domain_shared (K Prateek
Nayak)
- Add parameter to split LLC (Peter Zijlstra)
Core scheduler updates:
- Use trace_call__<tp>() to save a static branch (Gabriele Monaco)
Scheduler statistics updates:
- Drop now-stale mul_u64_u64_div_u64() cputime over-approximation
guard (Nicolas Pitre)
Deadline scheduler updates:
- Reject debugfs dl_server writes for offline CPUs (Andrea Righi)
- Fix replenishment logic for non-deferred servers (Yuri Andriaccio)
RT scheduling updates:
- Turn RT_PUSH_IPI default off for non PREEMPT_RT (Steven Rostedt)
- Update default bandwidth for real-time tasks to 1.0 (Yuri
Andriaccio)
Proxy scheduling updates:
- A series to implement Optimized Donor Migration for Proxy Execution
(John Stultz, Peter Zijlstra)
- Various proxy scheduling cleanups and fixes (Peter Zijlstra,
K Prateek Nayak)
Misc fixes, improvements and cleanups by Aaron Lu, Andrea Righi,
Zenghui Yu, Chen Yu, Guanyou.Chen, John Stultz, Shrikanth Hegde,
Peter Zijlstra, Liang Luo and Yiyang Chen"
* tag 'sched-core-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (91 commits)
sched/fair: Fix newidle vs core-sched
sched/deadline: Use task_on_rq_migrating() helper
sched/core: Combine separate 'else' and 'if' statements
sched/fair: Fix cpu_util runnable_avg arithmetic
sched/fair: Unify cfs_rq throttling via account_cfs_rq_runtime()
sched/fair: Move the throttled tasks to a local list in tg_unthrottle_up()
sched/fair: Call update_curr() before unthrottling the hierarchy
sched/fair: Use throttled_csd_list for local unthrottle
sched/fair: Convert cfs bandwidth throttling to use guards
sched/fair: Allocate cfs_tg_state with percpu allocator
sched/fair: Remove task_group->se pointer array
sched/fair: Co-locate cfs_rq and sched_entity in cfs_tg_state
sched: restore timer_slack_ns when resetting RT policy on fork
MAINTAINERS: Fix spelling mistake in Peter's name
sched: Simplify ttwu_runnable()
sched/proxy: Remove superfluous clear_task_blocked_in()
sched/proxy: Remove PROXY_WAKING
sched/proxy: Switch proxy to use p->is_blocked
sched/proxy: Only return migrate when needed
sched: Be more strict about p->is_blocked
...
|
