| Age | Commit message (Collapse) | Author |
|---|
|
Every devmem dmabuf binding today hands the page_pool PAGE_SIZE niovs.
This caps a single RX descriptor at PAGE_SIZE, burning CPU on buffer
churn for large flows.
Add a bind-time netlink attribute, NETDEV_A_DMABUF_RX_PAGE_SIZE, that
lets userspace request a larger niov size. The value must be a power of
two >= PAGE_SIZE.
The TX path is changed to always pass PAGE_SIZE.
Measurements:
Setup: kperf in devmem RX/TX cuda mode, 4 flows, 64 MB messages, 60s,
dctcp, num-rx-queues=4, dmabuf-rx/tx-size-mb=2048, 10 runs per niov
size, mlx5.
CPU Util:
niov net sirq % net idle % app sys % app idle %
----- ---------------- ---------------- ---------------- ----------------
4K 62.38 +/- 8.27 33.40 +/- 7.51 54.15 +/- 10.23 43.67 +/- 10.53
16K 58.91 +/- 5.35 35.23 +/- 5.88 41.05 +/- 8.87 56.42 +/- 9.24
32K 64.12 +/- 0.68 31.09 +/- 1.48 44.54 +/- 3.51 52.63 +/- 3.65
64K 54.69 +/- 5.54 39.67 +/- 5.81 35.47 +/- 3.11 61.97 +/- 3.27
RX app sys % drops ~19% from 4K to 64K.
Throughput:
niov RX dev Gbps RX flow avg Gbps
----- ---------------- -----------------
4K 300.63 +/- 53.21 75.16 +/- 13.30
16K 321.35 +/- 28.20 80.34 +/- 7.05
32K 347.63 +/- 2.20 86.91 +/- 0.55
64K 332.11 +/- 14.26 83.03 +/- 3.56
Throughput seems to increase, but the stdev is pretty wide so could just
be noise.
kperf support (not yet merged):
https://github.com/facebookexperimental/kperf/commit/8837577f920876bce6986ec18869ac04439ebcd2
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260805-tcpdm-large-niovs-v8-1-3e0225e2808c@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds observability for the io_uring zcrx rx-buf-len configuration.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20260612211709.1456966-3-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NETDEV_CMD_BIND_RX is currently GENL_ADMIN_PERM, which checks
CAP_NET_ADMIN against init userns. With recent container/netkit/ns
support for devmem, other userns/netns use cases come online and require
bind-rx to allow CAP_NET_ADMIN in non-init user ns as well.
Switch the flag to GENL_UNS_ADMIN_PERM to allow bind-rx for
CAP_NET_ADMIN in the netns's owning userns as well.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260602-nl-prov-v2-1-ad721142c641@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NIPA tries to make sure that HW tests don't modify system state.
It saves the state of page pools, too. Now that I write this commit
message I realize that this is impractical since page pool IDs and
state will get legitimately changed by the tests. But I already
spent a couple of hours implementing the filtering, so..
Link: https://patch.msgid.link/20260506034821.1710113-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a ynl netdev family operation called queue-create that creates a
new queue on a netdevice:
name: queue-create
attribute-set: queue
flags: [admin-perm]
do:
request:
attributes:
- ifindex
- type
- lease
reply: &queue-create-op
attributes:
- id
This is a generic operation such that it can be extended for various
use cases in future. Right now it is mandatory to specify ifindex,
the queue type which is enforced to rx and a lease. The newly created
queue id is returned to the caller.
A queue from a virtual device can have a lease which refers to another
queue from a physical device. This is useful for memory providers
and AF_XDP operations which take an ifindex and queue id to allow
applications to bind against virtual devices in containers. The lease
couples both queues together and allows to proxy the operations from
a virtual device in a container to the physical device.
In future, the nested lease attribute can be lifted and made optional
for other use-cases such as dynamic queue creation for physical
netdevs. The lack of lease and the specification of the physical
device as an ifindex will imply that we need a real queue to be
allocated. Similarly, the queue type enforcement to rx can then be
lifted as well to support tx.
An early implementation had only driver-specific integration [0], but
in order for other virtual devices to reuse, it makes sense to have
this as a generic API in core net.
For leasing queues, the virtual netdev must have real_num_rx_queues
less than num_rx_queues at the time of calling queue-create. The
queue-type must be rx as only rx queues are supported for leasing
for now. We also enforce that the queue-create ifindex must point
to a virtual device, and that the nested lease attribute's ifindex
must point to a physical device. The nested lease attribute set
contains a netns-id attribute which is optional and can specify a
netns-id relative to the caller's netns. It requires cap_net_admin
and if the netns-id attribute is not specified, the lease ifindex
will be retrieved from the current netns. Also, it is modeled as
an s32 type similarly as done elsewhere in the stack.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0]
Link: https://patch.msgid.link/20260402231031.447597-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The phrasing of the page-pool-get doc is very confusing.
It's supposed to highlight that support depends on the driver
doing its part but it sounds like orphaned page pools won't
be visible.
The description of the ifindex is completely wrong.
We move the page pool to loopback and skip the attribute if
ifindex is loopback.
Link: https://lore.kernel.org/20260104084347.5de3a537@kernel.org
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20260104165232.710460-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing entries in C attribute list.
Link: https://patch.msgid.link/20251104232348.1954349-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new state NAPI_STATE_THREADED_BUSY_POLL to the NAPI state enum to
enable and disable threaded busy polling.
When threaded busy polling is enabled for a NAPI, enable
NAPI_STATE_THREADED also.
When the threaded NAPI is scheduled, set NAPI_STATE_IN_BUSY_POLL to
signal napi_complete_done not to rearm interrupts.
Whenever NAPI_STATE_THREADED_BUSY_POLL is unset, the
NAPI_STATE_IN_BUSY_POLL will be unset, napi_complete_done unsets the
NAPI_STATE_SCHED_THREADED bit also, which in turn will make the kthread
go to sleep.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Martin Karsten <mkarsten@uwaterloo.ca>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Link: https://patch.msgid.link/20251028203007.575686-2-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In YAML, it is allowed to declare a scalar strings at the next lines
without explicitly declaring them as a block. Yet, they looks weird, and
can cause issues when ':' or '#' are present.
The modified lines didn't have issues with the special characters, but
it seems better to explicitly declare such blocks as scalar strings to
encourage people to "properly" declare future scalar strings.
The right angle bracket is used with a minus sign to indicate that the
folded style should be used without adding extra newlines. By doing
that, the output is not changed compared to what was done before this
patch.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250913-net-next-ynl-attr-doc-rst-v3-3-4f06420d87db@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of using '0' and '1' for napi threaded state use an enum with
'disabled' and 'enabled' states.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-4-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A net device has a threaded sysctl that can be used to enable threaded
NAPI polling on all of the NAPI contexts under that device. Allow
enabling threaded NAPI polling at individual NAPI level using netlink.
Extend the netlink operation `napi-set` and allow setting the threaded
attribute of a NAPI. This will enable the threaded polling on a NAPI
context.
Add a test in `nl_netdev.py` that verifies various cases of threaded
NAPI being set at NAPI and at device level.
Tested
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250710211203.3979655-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all line too long errors reported by yamllint in the netlink
specs, e.g.
error line too long (97 > 80 characters) (line-length)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-7-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all indentation related errors reported by yamllint in the
netlink specs, e.g.
error wrong indentation: expected 6 but found 5 (indentation)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-6-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all comments warnings reported by yamllint in the netlink specs:
warning too few spaces before comment: expected 2 (comments)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all space inside brackets errors reported by yamllint in
the netlink specs:
error too many spaces inside brackets (brackets)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all document-start warnings reported by yamllint in the
netlink specs:
warning missing document start "---" (document-start)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add bind-tx netlink call to attach dmabuf for TX; queue is not
required, only ifindex and dmabuf fd for attachment.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508004830.4100853-4-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
No functional changes. Next patches will add more granular locking
to netdev_nl_sock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-02-20
We've added 19 non-merge commits during the last 8 day(s) which contain
a total of 35 files changed, 1126 insertions(+), 53 deletions(-).
The main changes are:
1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing
2) Add network TX timestamping support to BPF sock_ops, from Jason Xing
3) Add TX metadata Launch Time support, from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
igc: Add launch time support to XDP ZC
igc: Refactor empty frame insertion for launch time support
net: stmmac: Add launch time support to XDP ZC
selftests/bpf: Add launch time request to xdp_hw_metadata
xsk: Add launch time hardware offload support to XDP Tx metadata
selftests/bpf: Add simple bpf tests in the tx path for timestamping feature
bpf: Support selective sampling for bpf timestamping
bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback
net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING
bpf: Disable unsafe helpers in TX timestamping callbacks
bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback
bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping
bpf: Add networking timestamping support to bpf_get/setsockopt()
selftests/bpf: Add rto max for bpf_setsockopt test
bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt
====================
Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the XDP Tx metadata framework so that user can requests launch time
hardware offload, where the Ethernet device will schedule the packet for
transmission at a pre-determined time called launch time. The value of
launch time is communicated from user space to Ethernet driver via
launch_time field of struct xsk_tx_metadata.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250216093430.957880-2-yoong.siang.song@intel.com
|
|
Could be just me, but I had to pause and double check that the Tx csum
counter in qstat should include GSO'd packets. GSO pretty much implies
csum so one could possibly interpret the csum counter as pure csum offload.
But the counters are based on virtio:
[tx_needs_csum]
The number of packets which require checksum calculation by the device.
[rx_needs_csum]
The number of packets with VIRTIO_NET_HDR_F_NEEDS_CSUM.
and VIRTIO_NET_HDR_F_NEEDS_CSUM gets set on GSO packets virtio sends.
Clarify this in the spec to avoid any confusion.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250214224601.2271201-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose a new per-queue nest attribute, xsk, which will be present for
queues that are being used for AF_XDP. If the queue is not being used for
AF_XDP, the nest will not be present.
In the future, this attribute can be extended to include more data about
XSK as it is needed.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a nested attribute for io_uring memory provider info. For now it is
empty and its presence indicates that a particular page pool or queue
has an io_uring memory provider attached.
$ ./cli.py --spec netlink/specs/netdev.yaml --dump page-pool-get
[{'id': 80,
'ifindex': 2,
'inflight': 64,
'inflight-mem': 262144,
'napi-id': 525},
{'id': 79,
'ifindex': 2,
'inflight': 320,
'inflight-mem': 1310720,
'io_uring': {},
'napi-id': 525},
...
$ ./cli.py --spec netlink/specs/netdev.yaml --dump queue-get
[{'id': 0, 'ifindex': 1, 'type': 'rx'},
{'id': 0, 'ifindex': 1, 'type': 'tx'},
{'id': 0, 'ifindex': 2, 'napi-id': 513, 'type': 'rx'},
{'id': 1, 'ifindex': 2, 'napi-id': 514, 'type': 'rx'},
...
{'id': 12, 'ifindex': 2, 'io_uring': {}, 'napi-id': 525, 'type': 'rx'},
...
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-6-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a per-NAPI IRQ suspension parameter, which can be get/set with
netdev-genl.
This patch doesn't change any behavior but prepares the code for other
changes in the following commits which use irq_suspend_timeout as a
timeout for IRQ suspension.
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://patch.msgid.link/20241109050245.191288-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to set per-NAPI defer_hard_irqs and gro_flush_timeout.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-7-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support dumping gro_flush_timeout for a NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-5-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support dumping defer_hard_irqs for a NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add dmabuf information to page_pool stats:
$ ./cli.py --spec ../netlink/specs/netdev.yaml --dump page-pool-get
...
{'dmabuf': 10,
'id': 456,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 455,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 454,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 453,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 452,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 451,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 450,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 449,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
And queue stats:
$ ./cli.py --spec ../netlink/specs/netdev.yaml --dump queue-get
...
{'dmabuf': 10, 'id': 8, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 9, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 10, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 11, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 12, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 13, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 14, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 15, 'ifindex': 3, 'type': 'rx'},
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-14-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a netdev_dmabuf_binding struct which represents the
dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to
rx queues on the netdevice. On the binding, the dma_buf_attach
& dma_buf_map_attachment will occur. The entries in the sg_table from
mapping will be inserted into a genpool to make it ready
for allocation.
The chunks in the genpool are owned by a dmabuf_chunk_owner struct which
holds the dma-buf offset of the base of the chunk and the dma_addr of
the chunk. Both are needed to use allocations that come from this chunk.
We create a new type that represents an allocation from the genpool:
net_iov. We setup the net_iov allocation size in the
genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally
allocated by the page pool and given to the drivers.
The user can unbind the dmabuf from the netdevice by closing the netlink
socket that established the binding. We do this so that the binding is
automatically unbound even if the userspace process crashes.
The binding and unbinding leaves an indicator in struct netdev_rx_queue
that the given queue is bound, and the binding is actuated by resetting
the rx queue using the queue API.
The netdev_dmabuf_binding struct is refcounted, and releases its
resources only when all the refs are released.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
API takes the dma-buf fd as input, and binds it to the netdevice. The
user can specify the rx queues to bind the dma-buf to.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-3-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent commit 0cfe71f45f42 ("netdev: add queue stats") added
a lot of useful stats, but only those immediately needed by virtio.
Presumably virtio does not support CHECKSUM_COMPLETE,
so statistic for that form of checksumming wasn't included.
Other drivers will definitely need it, in fact we expect it
to be needed in net-next soon (mlx5). So let's add the definition
of the counter for CHECKSUM_COMPLETE to uAPI in net already,
so that the counters are in a more natural order (all subsequent
counters have not been present in any released kernel, yet).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Fixes: 0cfe71f45f42 ("netdev: add queue stats")
Link: https://lore.kernel.org/r/20240529163547.3693194-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
TX queue stop and wake are counted by some drivers.
Support reporting these via netdev-genl queue stats.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240510201927.1821109-2-danielj@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These stats are commonly. Support reporting those via netdev-genl queue
stats.
name: rx-hw-drops
name: rx-hw-drop-overruns
name: rx-csum-unnecessary
name: rx-csum-none
name: rx-csum-bad
name: rx-hw-gro-packets
name: rx-hw-gro-bytes
name: rx-hw-gro-wire-packets
name: rx-hw-gro-wire-bytes
name: rx-hw-drop-ratelimits
name: tx-hw-drops
name: tx-hw-drop-errors
name: tx-csum-none
name: tx-needs-csum
name: tx-hw-gso-packets
name: tx-hw-gso-bytes
name: tx-hw-gso-wire-packets
name: tx-hw-gso-wire-bytes
name: tx-hw-drop-ratelimits
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Having to filter the right ifindex in the tests is a bit tedious.
Add support for dumping qstats for a single ifindex.
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240420023543.3300306-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rx alloc failures are commonly counted by drivers.
Support reporting those via netdev-genl queue stats.
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.
Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.
The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement functionality that enables drivers to expose VLAN tag
to XDP code.
VLAN tag is represented by 2 variables:
- protocol ID, which is passed to bpf code in BE
- VLAN TCI, in host byte order
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20231205210847.28460-10-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support in netlink spec(netdev.yaml) for PID of the
NAPI thread. Add code generated from the spec.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/170147335301.5260.11872351477120434501.stgit@anambiarhost.jf.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support in netlink spec(netdev.yaml) for interrupt number
among the NAPI attributes. Add code generated from the spec.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/170147334210.5260.18178387869057516983.stgit@anambiarhost.jf.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support in netlink spec(netdev.yaml) for napi related information.
Add code generated from the spec.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/170147333119.5260.7050639053080529108.stgit@anambiarhost.jf.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support in netlink spec(netdev.yaml) for queue information.
Add code generated from the spec.
Note: The "queue-type" attribute takes values 0 and 1 for rx
and tx queue type respectively.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/170147330963.5260.2576294626647300472.stgit@anambiarhost.jf.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-30
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 58 files changed, 1598 insertions(+), 154 deletions(-).
The main changes are:
1) Add initial TX metadata implementation for AF_XDP with support in mlx5
and stmmac drivers. Two types of offloads are supported right now, that
is, TX timestamp and TX checksum offload, from Stanislav Fomichev with
stmmac implementation from Song Yoong Siang.
2) Change BPF verifier logic to validate global subprograms lazily instead
of unconditionally before the main program, so they can be guarded using
BPF CO-RE techniques, from Andrii Nakryiko.
3) Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter, from Jiri Olsa.
4) Use pkg-config in BPF selftests to determine ld flags which is
in particular needed for linking statically, from Akihiko Odaki.
5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits)
bpf/tests: Remove duplicate JSGT tests
selftests/bpf: Add TX side to xdp_hw_metadata
selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP
selftests/bpf: Add TX side to xdp_metadata
selftests/bpf: Add csum helpers
selftests/xsk: Support tx_metadata_len
xsk: Add option to calculate TX checksum in SW
xsk: Validate xsk_tx_metadata flags
xsk: Document tx_metadata_len layout
net: stmmac: Add Tx HWTS support to XDP ZC
net/mlx5e: Implement AF_XDP TX timestamp and checksum offload
tools: ynl: Print xsk-features from the sample
xsk: Add TX timestamp and TX checksum offload support
xsk: Support tx_metadata_len
selftests/bpf: Use pkg-config for libelf
selftests/bpf: Override PKG_CONFIG for static builds
selftests/bpf: Choose pkg-config for the target
bpftool: Add support to display uprobe_multi links
selftests/bpf: Add link_info test for uprobe_multi link
selftests/bpf: Use bpf_link__destroy in fill_link_info tests
...
====================
Conflicts:
Documentation/netlink/specs/netdev.yaml:
839ff60df3ab ("net: page_pool: add nlspec for basic access to page pools")
48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support")
https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/
While at it also regen, tree is dirty after:
48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support")
looks like code wasn't re-rendered after "render-max" was removed.
Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This change actually defines the (initial) metadata layout
that should be used by AF_XDP userspace (xsk_tx_metadata).
The first field is flags which requests appropriate offloads,
followed by the offload-specific fields. The supported per-device
offloads are exported via netlink (new xsk-flags).
The offloads themselves are still implemented in a bit of a
framework-y fashion that's left from my initial kfunc attempt.
I'm introducing new xsk_tx_metadata_ops which drivers are
supposed to implement. The drivers are also supposed
to call xsk_tx_metadata_request/xsk_tx_metadata_complete in
the right places. Since xsk_tx_metadata_{request,_complete}
are static inline, we don't incur any extra overhead doing
indirect calls.
The benefit of this scheme is as follows:
- keeps all metadata layout parsing away from driver code
- makes it easy to grep and see which drivers implement what
- don't need any extra flags to maintain to keep track of what
offloads are implemented; if the callback is implemented - the offload
is supported (used by netlink reporting code)
Two offloads are defined right now:
1. XDP_TXMD_FLAGS_CHECKSUM: skb-style csum_start+csum_offset
2. XDP_TXMD_FLAGS_TIMESTAMP: writes TX timestamp back into metadata
area upon completion (tx_timestamp field)
XDP_TXMD_FLAGS_TIMESTAMP is also implemented for XDP_COPY mode: it writes
SW timestamp from the skb destructor (note I'm reusing hwtstamps to pass
metadata pointer).
The struct is forward-compatible and can be extended in the future
by appending more fields.
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231127190319.1190813-3-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Dump the stats into netlink. More clever approaches
like dumping the stats per-CPU for each CPU individually
to see where the packets get consumed can be implemented
in the future.
A trimmed example from a real (but recently booted system):
$ ./cli.py --no-schema --spec netlink/specs/netdev.yaml \
--dump page-pool-stats-get
[{'info': {'id': 19, 'ifindex': 2},
'alloc-empty': 48,
'alloc-fast': 3024,
'alloc-refill': 0,
'alloc-slow': 48,
'alloc-slow-high-order': 0,
'alloc-waive': 0,
'recycle-cache-full': 0,
'recycle-cached': 0,
'recycle-released-refcnt': 0,
'recycle-ring': 0,
'recycle-ring-full': 0},
{'info': {'id': 18, 'ifindex': 2},
'alloc-empty': 66,
'alloc-fast': 11811,
'alloc-refill': 35,
'alloc-slow': 66,
'alloc-slow-high-order': 0,
'alloc-waive': 0,
'recycle-cache-full': 1145,
'recycle-cached': 6541,
'recycle-released-refcnt': 0,
'recycle-ring': 1275,
'recycle-ring-full': 0},
{'info': {'id': 17, 'ifindex': 2},
'alloc-empty': 73,
'alloc-fast': 62099,
'alloc-refill': 413,
...
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Report when page pool was destroyed. Together with the inflight
/ memory use reporting this can serve as a replacement for the
warning about leaked page pools we currently print to dmesg.
Example output for a fake leaked page pool using some hacks
in netdevsim (one "live" pool, and one "leaked" on the same dev):
$ ./cli.py --no-schema --spec netlink/specs/netdev.yaml \
--dump page-pool-get
[{'id': 2, 'ifindex': 3},
{'id': 1, 'ifindex': 3, 'destroyed': 133, 'inflight': 1}]
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Advanced deployments need the ability to check memory use
of various system components. It makes it possible to make informed
decisions about memory allocation and to find regressions and leaks.
Report memory use of page pools. Report both number of references
and bytes held.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Generate netlink notifications about page pool state changes.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a Netlink spec in YAML for getting very basic information
about page pools.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
enum-as-flags can be used when enum declares bit positions but
we want to carry bitmask in an attribute. If the definition
is already provided as flags there's no need to indicate
the flag-iness of the attribute.
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231003153416.2479808-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
