| Age | Commit message (Collapse) | Author |
|
Add a framework driver for Dreamchip RPPX1 ISP. The driver aims to
provide a framework for other V4L2 based drivers to drive the RPPX1
functionality. The reason for this split is that the RPPX1 IP itself do
not provide any DMA engines to drive data to/from the device, instead it
depends on other IP blocks to implement these features.
While the peripherals around the RPPX1 ISP used in different designs and
by different vendors are different the RPPX1 core itself is the same.
For this reason the framework solution to be able to split the Dreamchip
RPPX1 driver from vendors usage of it have been picked in hope to reduce
duplication of the common parts.
The design is to try and keep the surface of this framework as small as
possible. The intention of this change is to be able to fill all needs
of this.
* Two functions to create and destroy a RPPX1 instance, rppx1_create()
and rppx1_destory(). These are intended to be called in the users
probe and remove code paths.
* Two functions to start and stop the RPPX1 processing, rppx1_start()
and rppx1_stop(). These are intended to be called in the users
stream on and stream off code paths.
* One function to ask the RPPX1 to process parameters buffer prepared
by user space, rppx1_params(). The intention is to call this
function when the parameter buffer is queued to the V4L2 driver and
the result stored by the driver until the time it needs to be
written to the RPPX1. It's the users responsibility to write it
either using MMIO or other means.
* One function to fill in a statistic buffer based on the current
status of the RPPX1, rppx1_stats_fill_isr(). The intention is that
the user call's this in its interrupt handler when it knows the
RPPX1 is done processing a frame.
* One function to ack and retrieve the interrupts generated by the
RPPX1, rppx1_interrupt(). The intention is to call this function
when the users interrupt handler detects the RPPX1 have raised and
interrupt. There is no need for the user to understand, or act, on
the actual RPPX1 interrupt, but it can if it wants too.
The initial support in the framework is limited and do not implement any
ISP processing algorithms other then configuring the RPPX1 to process
any Bayer (8-, 10, or 12-bit) image and produce either a RGB or YUYV
output. It do however probe all function blocks of the RPPX1 and provide
an interface to interact with both parameter and statistic bufferers.
The user of the framework will not change as algorithms for the
different function blocks of the ISP are being added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Co-developed-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra+renesas@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Rework the userspace-api documentation of V4L2 ISP to support
statistics.
Update all occurences of 'v4l2_isp_param' types to match the uAPI
changes and add a section to document the statistics serialization
format.
Signed-off-by: Antoine Bouyer <antoine.bouyer@nxp.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[Update on uAPI changes]
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Fix spelling errors reported by codespell:
thare -> there (vidioc-subdev-g-routing.rst)
stuct -> struct (legacy_dvb_video.rst)
No functional change.
Signed-off-by: shaikh.kamal <shaikhkamal2012@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
SMPTE ST 2086 defines the nominal ranges for mastering display
chromaticity and luminance values. Its Annex A also documents that
CTA 861-G uses zero maximum and minimum luminance values to signal
that the corresponding values are unknown, and the xy chromaticity
coordinate (0, 0) to signal that the white point chromaticity is
unknown.
The V4L2 HDR10 mastering display compound control currently rejects
these values. Consequently, an unknown white point or luminance value
prevents the entire compound control from being updated, making the
other valid mastering display metadata unavailable to userspace.
Accept (0, 0) as an unknown white point and zero as an unknown maximum
or minimum mastering luminance. Continue to reject partially zero white
point coordinates and non-zero values outside the nominal ranges.
Display primary validation remains unchanged.
Document the newly accepted unknown values in the V4L2 userspace API.
Fixes: 1ad0de78e794 ("media: v4l: Add HDR10 static metadata controls")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
If claiming a logical address fails, then set the
CEC_LOG_ADDRS_FL_CONFIG_FAILED flag. This makes it possible for
userspace to detect this corner case.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
It was not clearly stated in the documentation that calling
VIDIOC_S_EXT_CTRLS implies an internal VIDIOC_TRY_EXT_CTRLS
call.
Clarify this.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/linux-media/20260701-v4l2-doc-v1-1-9cce64b7a1c2@kernel.org/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add the new opcodes to cec.h.rst.exceptions to avoid
documentation build failures.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Link: https://patch.msgid.link/afe5d8f6cdf2dc030011eaf9acd8f68847d1b8cf.1779115235.git.hverkuil+cisco@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <afe5d8f6cdf2dc030011eaf9acd8f68847d1b8cf.1779115235.git.hverkuil+cisco@kernel.org>
|
|
The UVCIOC_CTRL_MAP lets userspace create a mapping for a custom
control.
This mapping is usually created by the uvcdynctrl userspace utility. We
would like to get the mappings into the driver instead.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add a reference to the LINK_FREQ control and clarify the meaning of the
control as for C-PHY the matter is less obvious.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a generic V4L2 boolean control V4L2_CID_MPEG_VIDEO_BACKGROUND_DETECTION
that allows encoders to detect background regions in a frame and use fewer
bits or skip mode to encode them, potentially reducing bitrate for streams
with stationary scenes.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
feature_data is defined as __s16 in the header.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The subdev format documentation has a subsection describing how to use
the media bus pixel codes for serial buses. While it describes the
sampling part well, it doesn't really describe the current convention
used for the components order.
Let's improve that.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix incorrect plural form of the uncountable noun 'hardware' in the
legacy DVB audio documentation.
Signed-off-by: Nauman Sabir <officialnaumansabir@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Add support for GMSL1 and GMSL‑coax modules (PCI mgb4)
- Add driver for TI VIP
- AV1 – first kernel support (pixel‑format, decoder, transcoder)
- Three new camera‑sensor drivers (os05b10, s5k3m5, s5kjn1)
- Synopsys CSI‑2 receiver driver
- Verisilicon & rkvdec – major fixes and enhancements
- IPU6 (and 7) fixes and preparation for metadata
- omap3isp: v4l2-compliance updates
- Fix DVB streaming, drop wait_prepare/finish (dvb/vb2)
* tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (307 commits)
media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer
media: uvcvideo: Fix allocation for small frame sizes
media: uvcvideo: Return queued buffers on start_streaming() failure
media: uvcvideo: Create an ID namespace for streaming output terminals
media: rkvdec: Add HEVC support for the VDPU383 variant
media: rkvdec: Add HEVC support for the VDPU381 variant
media: rkvdec: Add H264 support for the VDPU383 variant
media: rkvdec: Add H264 support for the VDPU381 variant
media: rkvdec: Disable multicore support
media: rkvdec: Enable all clocks without naming them
media: rkvdec: Support per-variant interrupt handler
media: rkvdec: Add RCB and SRAM support
media: rkvdec: Add variant specific coded formats list
media: rkvdec: Move hevc functions to common file
media: rkvdec: Move h264 functions to common file
media: rkvdec: Use structs to represent the HW RPS
media: rkvdec: Move cabac tables to their own source file
media: rkvdec: Switch to using structs instead of writel
media: visl: Add HEVC short and long term RPS sets
media: v4l2-ctrls: Add hevc_ext_sps_[ls]t_rps controls
...
|
|
Some hardware (e.g.: Rockchip's rk3588 hevc decoder) need to fully parse
the slice header, which cannot be passed with the current controls.
There is also no skip method similar as to what can be found in
verisilicon HW.
The SPS is therefore extended through these 2 new controls, providing the
long and short term reference information from the slice header for HEVC
decoding.
These now controls are similar as what is passed in the Vulkan Video API
with the StdVideoH265ShortTermRefPicSet and StdVideoH265LongTermRefPicsSps
structures embedded in the SPS struct.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add the new strobe duration and hardware strobe output enable to v4l
uAPI documentation. Additionally add labels for cross-referencing v4l
controls.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Document that -ENXIO is returned when the user tries to set a routing
configuration not supported by the hardware (or rather the driver). The
documentation details the exact cases of this, besides -EINVAL that is
already documented for VIDIOC_SUBDEV_S_ROUTING.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The routing flag indicating an active route is called
V4L2_SUBDEV_ROUTE_FL_ACTIVE, not V4L2_SUBDEV_STREAM_FL_ACTIVE. Fix this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Remove DocBook (?) conversion leftovers from figure titles, including
obsolete numbering and highlighting. This aligns these titles with others.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Introduce a new pixel format, V4L2_PIX_FMT_AV1, to the
Video4Linux2(V4L2) API. This format is intended for AV1
bitstreams in stateful decoding/encoding workflows.
The fourcc code 'AV10' is used to distinguish
this format from the existing V4L2_PIX_FMT_AV1_FRAME,
which is used for stateless AV1 decoder implementation.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
If colorspace changes, the client needs to renegotiate the pipeline,
otherwise the decoded frame may not be displayed correctly.
So add colorspace as a trigger parameter for dynamic resolution change.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Mali C55 driver uses the v4l2-isp framework, which defines its own
versioning numbers.
Do not use the Mali C55 specific version identifier in the code example
in the documentation of the Mali C55 stats and params metadata formats.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Drop the wait_prepare/finish callbacks. Instead require that the vb2_queue
lock field is always set and use that lock when waiting for buffers to
arrive.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document the mali-c55 parameter setting by expanding the relevant
pages in both admin-guide/ and userspace-api/.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add documentation explaining the ability to capture statistics from
the mali-c55 driver's new V4L2 device, as well as the various tap
points from which those statistics can be drawn in the ISP's
processing flow. Additionally add a page detailing the new V4L2
meta format for the mali-c55 statistics.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add definitions and documentation for the custom control that will
be needed by the Mali-C55 ISP driver. This will be a read only
bitmask of the driver's capabilities, informing userspace of which
blocks are fitted and which are absent.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Mali-C55 requires input data be in 20-bit format, MSB aligned.
Add some new media bus format macros to represent that input format.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Mali-C55 ISP by ARM requires 20-bits per colour channel input on
the bus. Add a new media bus format code to represent it.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add userspace documentation for V4L2 ISP generic parameters and
statistics formats.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add missing `. The missing backtick messed up the documentation output.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
There are lots of broken links on dmx. Those are mostly linked
to namespace handling.
Yet, some symbols were pointed to the wrong locations, and there
are some definitions that aren't needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <b2acf243771529daa925afddd2b68d07d7bbb164.1759329363.git.mchehab+huawei@kernel.org>
|
|
Enable cross-reference warnings for demux header.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <8f98dde399df8b937dadf09168194bacce682c7d.1759329363.git.mchehab+huawei@kernel.org>
|
|
The DVB documentation is using DTV.dmx for all demux symbols.
Use such domain for kernel-doc documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <27fcc036fb5c80bda8116029e1964ad229208095.1759329363.git.mchehab+huawei@kernel.org>
|
|
Enable xref broken warnings. While here, change the output to
only show cross-references, as there's no need to show the entire cec.h
header at the docs.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <c587872ca3685213d9f8e88277404c9e253633df.1759329363.git.mchehab+huawei@kernel.org>
|
|
All references there belong to CEC namespace.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <dd1270dd5d91538cdfb0b087127c53a9f4ba7885.1759329363.git.mchehab+huawei@kernel.org>
|
|
Some enum/struct fields don't contain C domain references.
Add them to avoid broken xrefs.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <c9b036938197f1dd5bc93f5c5be0245bd9e5d1ee.1759329363.git.mchehab+huawei@kernel.org>
|
|
This is an ancillary struct used for year-2038 compat logic.
It is not meant to be used directly on userspace.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <a6a0dc7366b1a5d7184b8f7d4ba27689051a1f6a.1759329363.git.mchehab+huawei@kernel.org>
|
|
This one is missing its c:macro definition.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <46f86be6ace28abe83ea9ce6fa6138e40185a23a.1759329363.git.mchehab+huawei@kernel.org>
|
|
Media uses V4L domain, but the replace rules are not considering
it.
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <927f9c19d90b62ffda950cdac9bba23c2ca09f53.1759329363.git.mchehab+huawei@kernel.org>
|
|
Media references belong to V4L namespace. Fix a lot of broken
links when including videodev2.h and probably fixing several
other broken cross-references between different files inside
media docs.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <b69fc5bd43da7d326b9f4720df59388088c64065.1759329363.git.mchehab+huawei@kernel.org>
|
|
All we wanted were to have a way to link the comprehensive
documentation with the actual symbols parsed from the header
file, as this helps to identify any broken references.
Use the new :toc: flag for media controller and enable warnings.
Here, we need to adjust the exceptions file to setup the C
namespace accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <5c8a87be712397563fc8ca914c3d92fe675e4071.1759329363.git.mchehab+huawei@kernel.org>
|
|
All we wanted were to have a way to link the comprehensive
documentation with the actual symbols parsed from the header
file, as this helps to identify any broken references.
Use the new :toc: flag for LIRC and enable warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <94dc601b4777ca544489ffc6cef9a2da5fe28e0e.1759329363.git.mchehab+huawei@kernel.org>
|
|
Except for two exception rules and dmx.h, the other files
are already handling properly cross references.
Fix the two exception rules for frontend.h, as those are
false-positives:
include/uapi/linux/dvb/frontend.h:959: WARNING: can't link to: c:type:: FE_GET_PROPERTY
include/uapi/linux/dvb/frontend.h:933: WARNING: can't link to: c:func:: FE_SET_FRONTEND_TUNE_MODE
The dmx.h are actual issues that will require an extra
patch to fill gaps.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <9ae6556ebd47de4f066a149ab0bbe7ce27acf2c4.1759329363.git.mchehab+huawei@kernel.org>
|
|
All we wanted were to have a way to link the comprehensive
documentation with the actual symbols parsed from the header
file, as this helps to identify any broken references.
Use the new :toc: flag for DVB.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <dbe95d83ae2117ed532fda423fd1c1d9906b7a19.1759329363.git.mchehab+huawei@kernel.org>
|
|
Specially when using c::namespace, it is not hard to break
a reference by forgetting to add a domain. Also, different
cases and using "-"/"_" the wrong way are typical cases that
people often gets wrong.
We might use a more complex logic here to also check for typos,
but let's keep it plain, simple.
This is enough to get thos exeptions from media controller:
.../include/uapi/linux/media.h:26: WARNING: Invalid xref: c:type:`media_device_info`. Possible alternatives:
c:type:`MC.media_device_info` (from mediactl/media-ioc-device-info)
.../include/uapi/linux/media.h:149: WARNING: Invalid xref: c:type:`media_entity_desc`. Possible alternatives:
c:type:`MC.media_entity_desc` (from mediactl/media-ioc-enum-entities)
.../include/uapi/linux/media.h:228: WARNING: Invalid xref: c:type:`media_link_desc`. Possible alternatives:
c:type:`MC.media_link_desc` (from mediactl/media-ioc-enum-links)
.../include/uapi/linux/media.h:235: WARNING: Invalid xref: c:type:`media_links_enum`. Possible alternatives:
c:type:`MC.media_links_enum` (from mediactl/media-ioc-enum-links)
.../include/uapi/linux/media.h:212: WARNING: Invalid xref: c:type:`media_pad_desc`. Possible alternatives:
c:type:`MC.media_pad_desc` (from mediactl/media-ioc-enum-links)
.../include/uapi/linux/media.h:298: WARNING: Invalid xref: c:type:`media_v2_entity`. Possible alternatives:
c:type:`MC.media_v2_entity` (from mediactl/media-ioc-g-topology)
.../include/uapi/linux/media.h:312: WARNING: Invalid xref: c:type:`media_v2_interface`. Possible alternatives:
c:type:`MC.media_v2_interface` (from mediactl/media-ioc-g-topology)
.../include/uapi/linux/media.h:307: WARNING: Invalid xref: c:type:`media_v2_intf_devnode`. Possible alternatives:
c:type:`MC.media_v2_intf_devnode` (from mediactl/media-ioc-g-topology)
.../include/uapi/linux/media.h:341: WARNING: Invalid xref: c:type:`media_v2_link`. Possible alternatives:
c:type:`MC.media_v2_link` (from mediactl/media-ioc-g-topology)
.../include/uapi/linux/media.h:333: WARNING: Invalid xref: c:type:`media_v2_pad`. Possible alternatives:
c:type:`MC.media_v2_pad` (from mediactl/media-ioc-g-topology)
.../include/uapi/linux/media.h:349: WARNING: Invalid xref: c:type:`media_v2_topology`. Possible alternatives:
c:type:`MC.media_v2_topology` (from mediactl/media-ioc-g-topology)
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <4c75d277e950e619ea00ba2dea336853a4aac976.1759329363.git.mchehab+huawei@kernel.org>
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
|
|
Replace hverkuil@xs4all.nl by hverkuil@kernel.org.
Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Replace hverkuil-cisco@xs4all.nl by hverkuil@kernel.org.
Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Now that kernel-include directive supports parsing data
structs directly, we can finally get rid of the horrible hack
we added to support parsing media uAPI symbols.
As a side effect, Documentation/output doesn't have anymore
media auto-generated .rst files on it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/5dbb257a4b283697271c9c7b8f4713857e8191c8.1755872208.git.mchehab+huawei@kernel.org
|
|
Now that we have a new parser, use it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/7025759744f74058eee55c35e8cd8cb5a2953fca.1755872208.git.mchehab+huawei@kernel.org
|