| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Add af_alg_restrict sysctl and white list
- Fix potential suspend/resume races in hwrng
Algorithms:
- Optimize vli additive operations using compiler builtins in ecc
Drivers:
- Remove unsafe/deprecated algorithms from qce
- Mark qce as BROKEN
- Add runtime PM and interconnect bandwidth scaling support to qce
- Remove crypto_rng from qcom, sun8i and caam
- Fix SG list issues in iaa
- Fix SEV init path bugs in ccp"
* tag 'v7.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (122 commits)
crypto: lskcipher - propagate errors from unaligned crypt
crypto: keembay - use crypto_memneq() to compare CCM AEAD tags
crypto: keembay - use crypto_memneq() to compare GCM AEAD tags
crypto: sa2ul - use crypto_memneq() to compare AEAD tag
hwrng: drivers - use named initializers for acpi_device_id
crypto: qce - fix CCM AAD buffer underallocation
crypto: iaa - unmap dst before software fallback on decompress
crypto: iaa - use bounce buffer for multi-sg decompress input
crypto: iaa - avoid counting fallback decompression bytes
crypto: iaa - fall back to software for multi-entry scatterlists
hwrng: core - Stop/start hwrng_fillfn() kthread before/after suspend-resume
crypto: hisilicon/sec2 - fix CCM algorithm long packet failure
crypto: eip93 - use struct_size() and flexible array for ring allocation
crypto: krb5 - use kfree_sensitive() for derived key buffers
crypto: af_alg - Stop after finding name in allowlist
crypto: af_alg - Replace 'bool privileged' with flags
crypto: af_alg - Make cbc(paes) privileged-only
hwrng: imx-rngc - Disable clock on registration failure
crypto: qat - remove dead ADF_HEX code
crypto: qce - simplify qce_handle_request
...
|
|
Use a named initializer for the acpi_device_id fields which
makes the code more readable and consistent with how lists
are initialized in the rest of the kernel code base. Also
drop explicitly setting fields to 0 where it is redundant.
Signed-off-by: Pawel Zalewski (The Capable Hub) <pzalewski@thegoodpenguin.co.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The hwrng_fillfn() kernel thread accesses the RNG device directly. During
suspend and resume sequences, hwrng_fillfn() may attempt to access the RNG
device while it is suspended. To address this, the hwrng_fillfn() kernel
thread is stopped before suspend, and restarted after resume. This is done
using the pm_notifier mechanism.
Issue was found while doing suspend-to-ram on J721S2 EVM board with
omap-rng driver.
echo mem > /sys/power/state
[ 27.922259] PM: suspend entry (deep)
[ 27.927191] Filesystems sync: 0.000 seconds
[ 27.933858] Freezing user space processes
[ 27.939119] Freezing user space processes completed (elapsed 0.001 seconds)
[ 27.946090] OOM killer disabled.
[ 27.949315] Freezing remaining freezable tasks
[ 27.954887] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 27.963337] GFP mask restricted
[ 27.967069] omap_rng 4e10000.rng: PM: calling platform_pm_suspend @ 195, parent: 4e00000.crypto
[ 27.967072] mmcblk mmc1:9fb0: PM: calling mmc_bus_suspend @ 122, parent: mmc1
[ 27.968636] mmcblk mmc1:9fb0: PM: mmc_bus_suspend returned 0 after 1546 usecs
[ 27.975778] omap_rng 4e10000.rng: PM: platform_pm_suspend returned 0 after 3 usecs
...
[ 33.510667] ti-sci 44083000.system-controller: PM: ti_sci_suspend_noirq returned 0 after 0 usecs
[ 33.510671] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError
[ 33.510681] CPU: 0 UID: 0 PID: 132 Comm: hwrng Tainted: G M W 7.0.0-12695-g8923b7a6e11d #19 PREEMPT
[ 33.510690] Tainted: [M]=MACHINE_CHECK, [W]=WARN
[ 33.510693] Hardware name: Texas Instruments J721S2 EVM (DT)
[ 33.510697] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 33.510701] pc : omap_rng_do_read+0x3c/0xe0
[ 33.510709] lr : omap_rng_do_read+0x58/0xe0
[ 33.510712] sp : ffff80008942be00
[ 33.510713] x29: ffff80008942be00 x28: 0000000000000000 x27: 0000000000000000
[ 33.510719] x26: 0000000000000010 x25: 0000000000000010 x24: ffff0008065644e8
[ 33.510724] x23: ffff8000878b3370 x22: ffff00080148b2c0 x21: 0000000000000000
[ 33.510728] x20: ffff000806564480 x19: 0000000000000064 x18: 0000000000000000
[ 33.510732] x17: 6573752031207265 x16: 7466612030206465 x15: 6e72757465722071
[ 33.510737] x14: ffff0008062c8080 x13: 000031702bc0da42 x12: 0000000000000001
[ 33.510741] x11: 00000000000000c0 x10: 0000000000000b30 x9 : ffff80008942bc80
[ 33.510745] x8 : ffff0008062c8b90 x7 : ffff000b7dfa34c0 x6 : 0000000805ca16c1
[ 33.510749] x5 : 0000000000000000 x4 : ffff800080e17bfc x3 : ffff800087389c68
[ 33.510753] x2 : 0000000000000000 x1 : 0000000000000010 x0 : 000000000000a7c6
[ 33.510759] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 33.510762] CPU: 0 UID: 0 PID: 132 Comm: hwrng Tainted: G M W 7.0.0-12695-g8923b7a6e11d #19 PREEMPT
[ 33.510767] Tainted: [M]=MACHINE_CHECK, [W]=WARN
[ 33.510768] Hardware name: Texas Instruments J721S2 EVM (DT)
[ 33.510770] Call trace:
[ 33.510772] show_stack+0x18/0x24 (C)
[ 33.510780] dump_stack_lvl+0x34/0x8c
[ 33.510788] dump_stack+0x18/0x24
[ 33.510792] vpanic+0x47c/0x4dc
[ 33.510799] do_panic_on_target_cpu+0x0/0x1c
[ 33.510803] add_taint+0x0/0xbc
[ 33.510807] arm64_serror_panic+0x70/0x80
[ 33.510812] do_serror+0x3c/0x70
[ 33.510815] el1h_64_error_handler+0x34/0x50
[ 33.510823] el1h_64_error+0x6c/0x70
[ 33.510827] omap_rng_do_read+0x3c/0xe0 (P)
[ 33.510831] hwrng_fillfn+0x98/0x330
[ 33.510834] kthread+0x130/0x13c
[ 33.510845] ret_from_fork+0x10/0x20
[ 33.510850] SMP: stopping secondary CPUs
[ 33.519442] Kernel Offset: disabled
[ 33.519444] CPU features: 0x04000000,800a0008,00040001,0400421b
[ 33.519448] Memory Limit: none
[ 33.732904] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
Signed-off-by: Thomas Richard (TI) <thomas.richard@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The RNGC clock is enabled manually before runtime PM is configured. If
devm_hwrng_register() fails, probe returns without disabling the clock.
The devm_pm_runtime_enable() cleanup only disables runtime PM and does not
call imx_rngc_suspend().
Disable the clock before returning from this failure path.
Fixes: 7a96a64e8689 ("hwrng: imx-rngc - add runtime pm")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
stm32_rng_probe() enables autosuspend and runtime PM before registering the
hwrng. If devm_hwrng_register() fails, probe returns with runtime PM left
enabled and autosuspend still selected.
The remove callback also only disables runtime PM and does not undo
pm_runtime_use_autosuspend().
Use devm_pm_runtime_enable() so runtime PM is unwound automatically on
probe failure and driver detach. Since the managed cleanup also disables
runtime PM,drop the remove callback.
Fixes: c6a97c42e399 ("hwrng: stm32 - add support for STM32 HW RNG")
Cc: stable@vger.kernel.org
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The Kconfig symbol and associated seem to be badly named as they have
nothing OMAP specific but instead refer to Inside Secure Safexcel
devices which have been used in many SoCs from different
manufacturers (like OMAP, Marvell but also eg. Renesas).
The Renesas RZ/N1D features this IP, so add this architecture to the
dependency allow list. In practice this dependency list does not seem
very relevant and could be entirely dropped, given the fact that this IP
has been implemented by many different vendors and seems to be
architecture agnostic.
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() automatically logs
detailed error messages on failure. Remove the now-redundant
driver-specific dev_err() and dev_err_probe() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ks_sa_rng_probe() enables runtime PM and resumes the device before
registering the hwrng. If devm_hwrng_register() fails, probe returns
without dropping the runtime PM usage count or disabling runtime PM.
Unwind the runtime PM state on the registration failure path, matching
the cleanup done by remove().
Fixes: eb428ee0e3ca ("hwrng: ks-sa - add hw_random driver")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
omap_rng_probe() enables runtime PM before acquiring and enabling the
functional clocks. Several later error paths returned or unwound without
undoing all state acquired so far.
If pm_runtime_resume_and_get() failed, the driver returned through the
generic ioremap error label and left runtime PM enabled. If either clock
lookup returned -EPROBE_DEFER, the function returned directly and skipped
the runtime PM cleanup; the register clock defer path could also leave the
already enabled functional clock prepared.
Route these failures through the existing unwind labels so each path only
undoes resources that were acquired successfully. Keep the resume failure
path limited to pm_runtime_disable(), and use the later labels only after
the runtime PM usage count or clocks have been acquired.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 61dc0a446e5d ("hwrng: omap - Fix assumption that runtime_get_sync will always succeed")
Fixes: 43ec540e6f9b ("hwrng: omap - move clock related code to omap_rng_probe()")
Fixes: b166be004491 ("hwrng: omap - Fix clock resource by adding a register clock")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
xtrng_readblock32() polls for 16-byte chunks but returns the number of
bytes read even when the first poll times out. Its caller then treats a
zero return as a short successful read, and partial reads for full
32-byte blocks can make the tail copy use a fixed block offset rather
than the amount already produced.
Return the poll error when no data has been read, preserve partial
positive returns after some data is available, stop the generator on all
collection exits, and append tail bytes at the current output count.
Fixes: 8979744aca80 ("crypto: xilinx - Add TRNG driver for Versal")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since this file just implements a hwrng driver, move it into
drivers/char/hw_random/. Rename the kconfig option accordingly as well.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since atmel_trng_driver keeps atmel_trng_pm_ops referenced and pm_ptr()
uses IS_ENABLED(), which allows the compiler to optimize away unused
variables, drop the redundant __maybe_unused annotation.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
hwrng_register(rng) does the following:
1. Checks if rng has name and read methods set
2. Checks if the name already exists
3. Adds rng to global rng_list
4. May try to set rng to current_rng
If step 4 fails, it returns an error. However, it does not remove the
rng from rng_list, causing a dangling reference which can result in
use-after-free if the caller frees rng, since registration failed.
Add a list_del_init() cleanup step.
Fixes: 2bbb6983887f ("hwrng: use rng source with best quality")
Signed-off-by: Manos Pitsidianakis <manos@pitsidianak.is>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
Pull virtio updates from Michael Tsirkin:
- new virtio CAN driver
- support for LoongArch architecture in fw_cfg
- support for firmware notifications in vdpa/octeon_ep
- support for VFs in virtio core
- fixes, cleanups all over the place, notably:
- vhost: fix vhost_get_avail_idx for a non empty ring
fixing an significant old perf regression
- READ_ONCE() annotations mean virtio ring is now
free of KCSAN warnings
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (37 commits)
can: virtio: Fix comment in UAPI header
can: virtio: Add virtio CAN driver
virtio: add num_vf callback to virtio_bus
fw_cfg: Add support for LoongArch architecture
vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler
vdpa/octeon_ep: Add vDPA device event handling for firmware notifications
vdpa/octeon_ep: Use 4 bytes for mailbox signature
vdpa/octeon_ep: Fix PF->VF mailbox data address calculation
vhost_task_create: kill unnecessary .exit_signal initialization
vhost: remove unnecessary module_init/exit functions
vdpa/mlx5: Use kvzalloc_flex() for MTT command memory
vdpa_sim_net: switch to dynamic root device
vdpa_sim_blk: switch to dynamic root device
virtio-mem: Destroy mutex before freeing virtio_mem
virtio-balloon: Destroy mutex before freeing virtio_balloon
tools/virtio: fix build for kmalloc_obj API and missing stubs
virtio_ring: Add READ_ONCE annotations for device-writable fields
vduse: fix compat handling for VDUSE_IOTLB_GET_FD/VDUSE_VQ_GET_INFO
tools/virtio: check mmap return value in vringh_test
vhost/net: complete zerocopy ubufs only once
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
|
|
The starfive_trng_read() function acquires a runtime PM reference
via pm_runtime_get_sync() but fails to release it on two error
paths. If starfive_trng_wait_idle() or starfive_trng_cmd() returns
an error, the function exits without calling
pm_runtime_put_sync_autosuspend(), leaving the runtime PM usage
counter permanently elevated and preventing the device from entering
runtime suspend.
Refactor the function to use a unified error path that calls
pm_runtime_put_sync_autosuspend() before returning.
Cc: stable@vger.kernel.org
Fixes: c388f458bc34 ("hwrng: starfive - Add TRNG driver for StarFive SoC")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since this file just implements a hwrng driver, move it into
drivers/char/hw_random/. Rename the kconfig option accordingly as well.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since this file just implements a hwrng driver, move it into
drivers/char/hw_random/. Rename the kconfig option accordingly as well.
Note that this moves the file back to its original location.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
random_recv_done() stores the device-reported used.len directly into
vi->data_avail. copy_data() then indexes vi->data[] using
vi->data_idx (advanced by previous copy_data() calls) and issues a
memcpy() without re-validating either value against the posted
buffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32
or 64).
A malicious or buggy virtio-rng backend can set used.len beyond
sizeof(vi->data), steering the memcpy() past the end of the inline
array into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixes
those bytes into the guest RNG, and guest root can also observe
them directly via /dev/hwrng.
Concrete impact is inside the guest:
- Memory-safety / hardening: any virtio-rng backend that
over-reports used.len causes the driver to read past vi->data
into unrelated slab contents. hwrng_fillfn() is a kernel thread
that runs as soon as the device is probed; no guest userspace
interaction is required to first-trigger the OOB.
- Cross-boundary leak (confidential-compute threat model): a
malicious hypervisor cooperating with a malicious or compromised
guest root userspace can use /dev/hwrng as a leak channel for
guest-kernel heap data. The host sets a large used.len, guest
root reads /dev/hwrng, and the returned bytes contain guest
kernel slab contents that were adjacent to vi->data. In
practice, confidential-compute guests (SEV-SNP, TDX) usually
disable virtio-rng entirely, so this path is narrow, but the
fix is still worth carrying because the underlying
memory-safety bug contaminates the guest RNG on any host.
KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backend
has been patched to report used.len = 0x10000:
BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0
Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52
Call Trace:
__asan_memcpy+0x23/0x60
virtio_read+0x394/0x5d0
hwrng_fillfn+0xb2/0x470
kthread+0x2cc/0x3a0
Allocated by task 1:
probe_common+0xa5/0x660
virtio_dev_probe+0x549/0xbc0
The buggy address belongs to the object at ffff88800ae0b800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes to the right of
allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20)
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened
usb9pfs_rx_complete() against unchecked device-reported length in
the USB 9p transport.
With the clamp at point of use and array_index_nospec() in place,
the same harness boots cleanly: copy_data() returns zero for the
bogus report, the device-supplied bytes after data_idx are
discarded, and the driver issues a fresh request.
Fixes: f7f510ec1957 ("virtio: An entropy device, as suggested by hpa.")
Cc: stable@vger.kernel.org
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260531142251.2792061-1-michael.bommarito@gmail.com>
|
|
trng_read() allocates a temporary staging buffer for CPACF TRNG
random data before copying it to userspace.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Replace strlcat() with sysfs_emit_at() in rng_available_show() and add
'int len' to keep track of the number of bytes written. sysfs_emit_at()
is preferred for formatting sysfs output because it provides safer
bounds checking.
Inline mutex_lock_interruptible() and drop the now-unused local error
variable. Remove the unnecessary 'buf' NUL initialization. Return 'len'
directly instead of strlen(buf).
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace the open-coded variant with MAX().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The wait parameter in rng_get_data() is a boolean flag - use bool
instead of int to better reflect its actual type.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The forward declarations for drop_current_rng() and rng_get_data() are
not needed - remove them.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Explicitly assigning 0 to driver_data in drivers not using this member
has no benefit. Drop these and similarly depend on the compiler to
zero-initialize the list terminator.
This is a preparation for making struct pci_device_id::driver_data an
anonymous union (which makes initializing using a list expression fail),
but it's also a nice cleanup by itself.
It was verified on x86 and arm64 that this change doesn't introduce
changes to the compiled drivers.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Newer versions of ARM TrustedFirmware-A on MediaTek's ARMv8 SoCs no longer
allow accessing the TRNG from outside of the trusted firmware.
Instead, a vendor-defined custom Secure Monitor Call can be used to
acquire random bytes.
Add support for newer SoCs (MT7981, MT7987, MT7988).
As TF-A for the MT7986 may either follow the old or the new
convention, the best bet is to test if firmware blocks direct access
to the hwrng and if so, expect the SMCC interface to be usable.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Pull virtio updates from Michael Tsirkin:
- in-order support in virtio core
- multiple address space support in vduse
- fixes, cleanups all over the place, notably dma alignment fixes for
non-cache-coherent systems
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (59 commits)
vduse: avoid adding implicit padding
vhost: fix caching attributes of MMIO regions by setting them explicitly
vdpa/mlx5: update MAC address handling in mlx5_vdpa_set_attr()
vdpa/mlx5: reuse common function for MAC address updates
vdpa/mlx5: update mlx_features with driver state check
crypto: virtio: Replace package id with numa node id
crypto: virtio: Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req
crypto: virtio: Add spinlock protection with virtqueue notification
Documentation: Add documentation for VDUSE Address Space IDs
vduse: bump version number
vduse: add vq group asid support
vduse: merge tree search logic of IOTLB_GET_FD and IOTLB_GET_INFO ioctls
vduse: take out allocations from vduse_dev_alloc_coherent
vduse: remove unused vaddr parameter of vduse_domain_free_coherent
vduse: refactor vdpa_dev_add for goto err handling
vhost: forbid change vq groups ASID if DRIVER_OK is set
vdpa: document set_group_asid thread safety
vduse: return internal vq group struct as map token
vduse: add vq group support
vduse: add v1 API definition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
|
|
Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread
exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex
lock, a concurrent hwrng_unregister() may call kthread_stop() again on
the same task.
Additionally, if hwrng_unregister() is called immediately after
hwrng_register(), the stopped thread may have never been executed. Thus,
hwrng_fill remains dirty even after hwrng_unregister() returns. In this
case, subsequent calls to hwrng_register() will fail to start new
threads, and hwrng_unregister() will call kthread_stop() on the same
freed task. In both cases, a use-after-free occurs:
refcount_t: addition on 0; use-after-free.
WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0
Call Trace:
kthread_stop+0x181/0x360
hwrng_unregister+0x288/0x380
virtrng_remove+0xe3/0x200
This patch fixes the race by protecting the global hwrng_fill pointer
inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only
once, and calls to kthread_run() and kthread_stop() are serialized
with the lock held.
To avoid deadlock in hwrng_fillfn() while being stopped with the lock
held, we convert current_rng to RCU, so that get_current_rng() can read
current_rng without holding the lock. To remove the lock from put_rng(),
we also delay the actual cleanup into a work_struct.
Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR()
checks are removed from its callers.
With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no
longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns
directly after current_rng is dropped, kthread_stop() would be called on
a freed task_struct later. To fix this, hwrng_fillfn() calls schedule()
now to keep the task alive until being stopped. The kthread_stop() call
is also moved from hwrng_unregister() to drop_current_rng(), ensuring
kthread_stop() is called on all possible paths where current_rng becomes
NULL, so that the thread would not wait forever.
Fixes: be4000bc4644 ("hwrng: create filler thread")
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Lianjie Wang <karin0.zst@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Simplify the TEE implementor ID match by returning the boolean
expression directly instead of going through an if/else.
Signed-off-by: Rouven Czerwinski <rouven.czerwinski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Airoha uses RAW mode to collect noise from the TRNG. These appear to
be unprocessed oscillations from the tero loop. For this reason, they
do not have a perfect distribution and entropy. Simple noise compression
reduces its size by 9%, so setting the quality to 900 seems reasonable.
The same value is used by the downstream driver.
Compare the size before and after compression:
$ ls -l random_airoha*
-rw-r--r-- 1 aleksander aleksander 76546048 Jan 3 23:43 random_airoha
-rw-rw-r-- 1 aleksander aleksander 69783562 Jan 5 20:23 random_airoha.zip
FIPS test results:
$ cat random_airoha | rngtest -c 10000
rngtest 2.6
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
rngtest: starting FIPS tests...
rngtest: bits received from input: 200000032
rngtest: FIPS 140-2 successes: 0
rngtest: FIPS 140-2 failures: 10000
rngtest: FIPS 140-2(2001-10-10) Monobit: 9957
rngtest: FIPS 140-2(2001-10-10) Poker: 10000
rngtest: FIPS 140-2(2001-10-10) Runs: 10000
rngtest: FIPS 140-2(2001-10-10) Long run: 4249
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=953.674; avg=27698.935; max=19073.486)Mibits/s
rngtest: FIPS tests speed: (min=59.791; avg=298.028; max=328.853)Mibits/s
rngtest: Program run time: 647638 microseconds
In general, these data look like real noise, but with lower entropy
than expected.
Fixes: e53ca8efcc5e ("hwrng: airoha - add support for Airoha EN7581 TRNG")
Suggested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The data buffer in struct virtrng_info is used for DMA_FROM_DEVICE via
virtqueue_add_inbuf() and shares cachelines with the adjacent
CPU-written fields (data_avail, data_idx).
The device writing to the DMA buffer and the CPU writing to adjacent
fields could corrupt each other's data on non-cache-coherent platforms.
Add __dma_from_device_group_begin()/end() annotations to place these
in distinct cache lines.
Message-ID: <157a63b6324d1f1307ddd4faa3b62a8b90a79423.1767601130.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The tee bus got dedicated callbacks for probe and remove.
Make use of these. This fixes a runtime warning about the driver needing
to be converted to the bus methods.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Reduce boilerplate by using the newly introduced module_tee_client_driver().
That takes care of assigning the driver's bus, so the explicit assigning
in this driver can be dropped.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
|
|
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel
message catalog" which never made it upstream.
Remove the macro in order to get rid of a pointless indirection. Replace
all users with the string it defines. In almost all cases this leads to a
simple replacement like this:
- #define KMSG_COMPONENT "appldata"
- #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+ #define pr_fmt(fmt) "appldata: " fmt
Except for some special cases this is just mechanical/scripted work.
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
min_t(u16, a, b) is likely to discard significant bits.
Replace:
min_t(u16, min_t(u16, default_quality, 1024), rng->quality ?: 1024);
with:
min3(default_quality, 1024, rng->quality ?: 1024);
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Driver's probe function matches against driver's of_device_id table,
where each entry has non-NULL match data, so of_match_node() can be
simplified with of_device_get_match_data().
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Convention is to place MODULE_DEVICE_TABLE() immediately after
definition of the affected table, so one can easily spot missing such.
There is on the other hand no benefits of putting MODULE_DEVICE_TABLE()
far away.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The HW RNG core allows for manual selection of which RNG device to use,
but does not allow for no device to be enabled. It may be desirable to
do this on systems with only a single suitable hardware RNG, where we
need exclusive access to other functionality on this device. In
particular when performing TPM firmware upgrades this lets us ensure the
kernel does not try to access the device.
Before:
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
After:
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
root@debian-qemu-efi:~# echo none > /sys/devices/virtual/misc/hw_random/rng_current
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:none
grep: /sys/devices/virtual/misc/hw_random/rng_quality: No such device
/sys/devices/virtual/misc/hw_random/rng_selected:1
(Observe using bpftrace no calls to TPM being made)
root@debian-qemu-efi:~# echo "" > /sys/devices/virtual/misc/hw_random/rng_current
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
(Observe using bpftrace that calls to the TPM resume)
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Drivers:
- Add ciphertext hiding support to ccp
- Add hashjoin, gather and UDMA data move features to hisilicon
- Add lz4 and lz77_only to hisilicon
- Add xilinx hwrng driver
- Add ti driver with ecb/cbc aes support
- Add ring buffer idle and command queue telemetry for GEN6 in qat
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable
- Fix CPU number wraparound in padata"
* tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits)
dt-bindings: rng: hisi-rng: convert to DT schema
crypto: doc - Add explicit title heading to API docs
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
KEYS: X.509: Fix Basic Constraints CA flag parsing
crypto: anubis - simplify return statement in anubis_mod_init
crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs
crypto: hisilicon/qm - clear all VF configurations in the hardware
crypto: hisilicon - enable error reporting again
crypto: hisilicon/qm - mask axi error before memory init
crypto: hisilicon/qm - invalidate queues in use
crypto: qat - Return pointer directly in adf_ctl_alloc_resources
crypto: aspeed - Fix dma_unmap_sg() direction
rhashtable: Use rcu_dereference_all and rcu_dereference_all_check
crypto: comp - Use same definition of context alloc and free ops
crypto: omap - convert from tasklet to BH workqueue
crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user()
crypto: caam - double the entropy delay interval for retry
padata: WQ_PERCPU added to alloc_workqueue users
padata: replace use of system_unbound_wq with system_dfl_wq
crypto: cryptd - WQ_PERCPU added to alloc_workqueue users
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Add relocation handling for R_SPARC_UA64 for sparc64 that is
generated by llvm and clarify printout on missing relocation handler
- Fix missing hugetlb tte initialization for sun4u
- Code cleanup for redundant use of __GPF_NOWARN for sparc64
- Fix prototypes of reads[bwl]() for sparc64 by adding missing const
and volatile pointer qualifiers
- Fix bugs in accurate exception reporting in multiple machine specific
sparc64 variants of copy_{from,to}_user() for sparc64
- Fix memory leak in error handling for sparc32
- Drop -ansi from asflags and replace __ASSEMBLY__ with __ASSEMBLER__
in headers for all arch/sparc
- Replace strcpy() with strscpy() for all arch/sparc
* tag 'sparc-for-6.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc: (22 commits)
sparc: Replace deprecated strcpy() with strscpy() in handle_nextprop_quirks()
sparc64: Replace deprecated strcpy() with strscpy() in build_path_component()
sparc: Replace deprecated strcpy() with strscpy() in prom_32.c
sparc: Replace deprecated strcpy() with strscpy() in domain services driver
sparc64: Replace deprecated strcpy() with strscpy() in prom_nextprop()
sparc: floppy: Replace deprecated strcpy() with strscpy() in sun_floppy_init()
sparc: parport: Replace deprecated strcpy() with strscpy() in ecpp_probe()
sparc: PCI: Replace deprecated strcpy() with strscpy()
sparc: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
sparc: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
sparc: Drop the "-ansi" from the asflags
sparc: fix error handling in scan_one_device()
sparc: fix accurate exception reporting in copy_{from,to}_user for M7
sparc: fix accurate exception reporting in copy_to_user for Niagara 4
sparc: fix accurate exception reporting in copy_{from_to}_user for Niagara
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC III
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC
sparc64: fix prototypes of reads[bwl]()
sparc64: Remove redundant __GFP_NOWARN
sparc64: fix hugetlb for sun4u
...
|
|
Fix division by zero in ks_sa_rng_init caused by missing clock
pointer initialization. The clk_get_rate() call is performed on
an uninitialized clk pointer, resulting in division by zero when
calculating delay values.
Add clock initialization code before using the clock.
Fixes: 6d01d8511dce ("hwrng: ks-sa - Add minimum sleep time before ready-polling")
Signed-off-by: Nishanth Menon <nm@ti.com>
drivers/char/hw_random/ks-sa-rng.c | 7 +++++++
1 file changed, 7 insertions(+)
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This is a completely mechanical patch (done with a simple "sed -i"
statement).
Cc: David S. Miller <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: sparclinux@vger.kernel.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
|
|
LAN969x uses the Atmel HWRNG, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Logging messages that show some type of "out of memory" error are generally
unnecessary as there is a generic message and a stack dump done by the
memory subsystem. These messages generally increase kernel size without
much added value[1].
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value
instead.
[1]: https://lore.kernel.org/lkml/1402419340.30479.18.camel@joe-AO725/
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It is better to replace ns_to_ktime() with us_to_ktime(),
which can make the code clearer.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
