| Age | Commit message (Collapse) | Author |
|---|
|
* clk-pile: (111 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is fully initialized
clk: ti: Make sure clk_init_data is fully initialized
MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
Drop Michael Turquette's clk maintainer entry
clk: ti: composite: resolve parent clocks by DT index, not by name
clk: ti: mux: resolve parent clocks by DT index, not by name
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
dt-bindings: clock: ti,keystone-gate: Convert to DT schema
dt-bindings: clock: ti: Convert APLL clock to DT schema
clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
dt-bindings: clock: ti,clockdomain: Convert to DT schema
dt-bindings: clock: Correct white-space style
clk: tegra: set up proper EMC clock implementation for Tegra114
clk: clocking-wizard: remove 20kHz restriction
clk: clocking-wizard: optimize clock search
clk: clocking-wizard: fix clock difference detection
clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
clk: tegra: support 48MHz clock for pll_p_out1
...
* clk-microchip:
clk: at91: Read "reg" with helper
|
|
into clk-pile
Pull clk patches from Brian Masney:
- New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),
UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree
bindings. Si549 support was added to the existing si544 driver.
- New clock and reset support for the Aspeed AST2700 PECI controller and Airoha
EN7523 PCIe PERSTOUT reset lines.
- The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to
the existing optional variant, and exports
devm_clk_hw_register_composite_pdata() for modular drivers.
- Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1
support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL
charge pump/lock parameter programming during dynamic reconfiguration.
- Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in
the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted
gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on
registration failure, a prepare reference leak in the palmas driver,
unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in
pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a
clocking-wizard clock difference detection bug.
- Various cleanups across tegra, st, and mvebu providers to stop misusing the
consumer clock API, along with other minor fixes and improvements.
Signed-off-by: Brian Masney <bmasney@redhat.com>
* tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits)
clk: tegra: set up proper EMC clock implementation for Tegra114
clk: clocking-wizard: remove 20kHz restriction
clk: clocking-wizard: optimize clock search
clk: clocking-wizard: fix clock difference detection
clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
clk: tegra: support 48MHz clock for pll_p_out1
clk: aspeed: add AST2700 PECI clock
dt-bindings: clock: ast2700: add PECI clock
clk: mediatek: Add mt8173-mfgtop driver
dt-bindings: clock: mediatek: Add mt8173 mfgtop
clk: tegra: clean-up simple provider misuse of the consumer API
clk: st: clean-up simple provider misuse of the consumer API
clk: mvebu: clean-up simple provider misuse of the consumer API
clk: remove conditional return with no effect
clk: Add devm_clk_bulk_get_enable()
clk: en7523: add support for dedicated PCIe PERSTOUT reset
dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT
arm64: dts: cix: sky1: add audss cru
reset: cix: add sky1 audss auxiliary reset driver
...
|
|
Pull clk patches picked up by Brian Masney:
Here's various improvements and fixes for the clk subsystem that was posted prior
to the opening of the last merge window.
- Add spread spectrum clock (SSC) support to the clk framework, including a new
assigned-clock-sscs devicetree property and clk_hw_set_spread_spectrum()
API with KUnit tests (Peng Fan)
- Add SCMI clock OEM extensions for the i.MX95 clock driver and introduce a
common SCMI clock header (Peng Fan)
- Add clock, reset, and devicetree bindings for the ESWIN EIC7700 HSP clock and
reset generator (Xuyang Dong)
- Add clk_determine_rate_noop() helper for clock drivers that can do any rate,
and convert existing open-coded implementations across hisilicon, imx, qcom,
renesas, rp1, samsung, scpi, sprd, mediatek phy, and mediatek pmdomain
drivers (Brian Masney)
- Add kernel-doc documentation for struct clk_core and the core clock flags,
and wire up clk identifiers into the documentation build (Brian Masney)
- Fix clk_divider_bestdiv() returning the minimum rate instead of the maximum
rate for large rate requests, with KUnit tests (Lad Prabhakar)
- Fix Nuvoton MA35D1 PLL frequency calculation including ignored div_u64
return values, incorrect PLL_CTL1_FRAC bit field width, and broken
determine_rate logic (Joey Lu)
- Support unique clock names for multi-socket Tegra platforms (Jon Hunter)
- Allow COMPILE_TEST builds for HiSilicon clock drivers (Rosen Penev)
- Various fixes and cleanups from Akari Tsuyukusa, Alexander A. Klimov,
Brian Masney, David Carlier, David Laight, Min zhang, Myeonghun Pak,
Pavel Löbl, Randy Dunlap, Rob Herring, Rosen Penev, Uwe Kleine-König,
William Theesfeld, Xuyang Dong, and Yu-Chun Lin
Signed-off-by: Brian Masney <bmasney@redhat.com>
[sboyd@kernel.org: Fix allmodconfig modpost failure in scmi]
* tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux: (53 commits)
pmdomain: mediatek: mtk-mfg: use clk_determine_rate_noop()
pmdomain: mediatek: airoha: use clk_determine_rate_noop()
phy: mediatek: phy-mtk-hdmi-mt2701: use clk_determine_rate_noop()
clk: sprd: use clk_determine_rate_noop()
clk: scpi: use clk_determine_rate_noop()
clk: samsung: acpm: use clk_determine_rate_noop()
clk: rp1: use clk_determine_rate_noop()
clk: renesas: rzg2l-cpg: use clk_determine_rate_noop()
clk: qcom: smd-rpm: use clk_determine_rate_noop()
clk: qcom: rpmh: use clk_determine_rate_noop()
clk: qcom: rpm: use clk_determine_rate_noop()
clk: imx: scu: use clk_determine_rate_noop()
clk: hisilicon: hi3660-stub: use clk_determine_rate_noop()
clk: add clk_determine_rate_noop()
clk: imx: scu: drop redundant init.ops variable assignment
clk: test: convert constants to use HZ_PER_MHZ
docs: clk: include some identifiers to keep documentation up to date
clk: add kernel docs for struct clk_core
clk: add kernel docs for the core flags
clk: hisilicon: allow COMPILE_TEST builds
...
|
|
Add a platform driver for the Cix Sky1 AUDSS CRU. The driver maps
the CRU registers and registers mux, divider and gate clocks for
DSP, SRAM, HDA, DMAC, I2S, mailbox, watchdog and timer blocks.
Four SoC-level audio reference clocks are enabled as inputs to the
internal clock tree. The driver releases the AUDSS NOC reset, enables
runtime PM and instantiates the auxiliary reset device.
Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Add a clock driver for the UltraRISC DP1000 SoC.
The clock tree is driven by a SYSPLL and provides fixed-factor clocks for
the subsystem and PCIe, divider-based root clocks for GMAC and the UART,
I2C, and SPI blocks, and per-instance gate clocks for UART0-3, I2C0-3,
and SPI0-1.
Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
COMMON_CLK_STM32MP already allows COMPILE_TEST, but the parent clock
Makefile only descends into drivers/clk/stm32 for ARCH_STM32. Use the
STM32MP clock symbol for that directory gate instead.
Tested with:
make LLVM=1 ARCH=loongarch drivers/clk/stm32/
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Follow the pattern of many other directories in this Makefile (sunxi-ng,
tenstorrent, ti, etc.) by using obj-y. This allows COMPILE_TEST to
select the driver without having CONFIG_ARCH_THEAD enabled
Tested with:
make LLVM=1 ARCH=loongarch drivers/clk/thead/
Assisted-by: Codex:GPT-5.5
Acked-by: Drew Fustini <fustini@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
The HiSilicon clock symbols already depend on ARCH_HISI or COMPILE_TEST,
but the parent clock Makefile only descends into the hisilicon directory
when ARCH_HISI is enabled.
Add a hidden family gate selected by the HiSilicon clock and reset symbols,
default it for ARCH_HISI, and use it for the parent Makefile descent. This
keeps existing platform builds unchanged while allowing compile-test
coverage.
Tested with:
make LLVM=1 ARCH=loongarch drivers/clk/hisilicon/
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Add KUnit tests to verify the behaviour of clk_divider_bestdiv() when
clk_round_rate() is called with ULONG_MAX, which is the canonical way
to probe the maximum rate a clock can produce.
Two test cases are introduced:
- clk_divider_bestdiv_ulong_max_returns_max_rate: registers a 1 GHz
fixed-rate parent driving a table-based divider whose smallest entry
is div=2 (entries: 2, 4, 8). Calls clk_hw_round_rate(div_hw, ULONG_MAX)
and checks the result.
- clk_divider_bestdiv_mux_ulong_max_returns_max_rate: places a two-input
mux (4 GHz and 2 GHz fixed-rate parents, CLK_SET_RATE_PARENT) ahead of
the same table-based divider to verify correct parent selection under
ULONG_MAX.
Both tests use an explicit clk_div_table with a minimum divider of 2 so
that the pre-loop maxdiv clamping in clk_divider_bestdiv():
maxdiv = min(ULONG_MAX / rate, maxdiv);
clamps maxdiv to 1, causing _next_div() to return 2 on the first
iteration and skip the loop body entirely. This makes bestdiv fall back
to the maximum divider, returning the minimum rate rather than the
maximum.
The expected values intentionally reflect the buggy output:
- test 1: PARENT_RATE_1GHZ / 8 (minimum rate, not maximum)
- test 2: 0 (invalid, loop never populated bestdiv)
These will be corrected to PARENT_RATE_1GHZ / 2 and PARENT_RATE_4GHZ / 2
respectively once the fix to clk_divider_bestdiv() is applied.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
- Introduce 'clk-scmi-oem.c' to support vendor-specific OEM extensions
for the SCMI clock driver, allows clean integration of vendor-specific
features without impacting the core SCMI clock driver logic.
- Extend 'clk-scmi.h' with 'scmi_clk_oem' structure and related
declarations.
- Initialize OEM extensions via 'scmi_clk_oem_init()'.
- Support querying OEM-specific features and setting spread spectrum.
- Pass 'scmi_device' to 'scmi_clk_ops_select()' for OEM data access.
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Add KUnit test coverage for the assigned-clock-sscs DT property that
configures spread spectrum on clocks before they are used.
Extend the existing test infrastructure to support spread spectrum:
- Add struct clk_spread_spectrum field to clk_dummy_context and a
clk_dummy_set_spread_spectrum callback
- Wire set_spread_spectrum into all dummy clock ops
- Extend clk_assigned_rates_register_clk and test parameter struct
to propagate initial SSCS values
Add a new separate test suite clk_assigned_sscs with three categories:
1. clk_assigned_sscs_assigns_one — verifies that a single
assigned-clock-sscs entry correctly configures spread spectrum
on one clock, testing both provider and consumer paths
2. clk_assigned_sscs_assigns_multiple — verifies that multiple
assigned-clock-sscs entries configure spread spectrum on two
clocks, testing both provider and consumer paths
3. clk_assigned_sscs_skips — verifies that malformed DT properties
are correctly skipped without error: missing assigned-clocks,
zero-valued SSCS, and null phandles, tested for both provider
and consumer scenarios
New DT overlays are added for all test scenarios:
- kunit_clk_assigned_sscs_one{,consumer} — single valid entry
- kunit_clk_assigned_sscs_multiple{,consumer} — two valid entries
- kunit_clk_assigned_sscs_without{,consumer} — missing assigned-clocks
- kunit_clk_assigned_sscs_zero{,consumer} — all-zero SSCS values
- kunit_clk_assigned_sscs_null{,consumer} — null phandle
Co-developed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
into clk-next
* clk-ti:
clk: keystone: sci-clk: fix application of sizeof to pointer
clk: keystone: don't cache clock rate
* clk-samsung:
clk: samsung: exynos990: Fix PERIC0/1 USI clock types
clk: samsung: exynos850: mark APM I3C clocks as critical
* clk-rockchip:
clk: rockchip: allow COMPILE_TEST builds
clk: rockchip: rk3588: add GATE_GRF clocks for I2S MCLK output to IO
soc: rockchip: rk3588: add SYS_GRF SOC_CON6 register offset
clk: rockchip: add helper to register auxiliary GRFs
clk: rockchip: allow grf_type_sys lookup in aux_grf_table
dt-bindings: clock: rockchip,rk3588-cru: add I2S MCLK output to IO clock IDs
* clk-spacemit:
clk: spacemit: k3: Add PCIe DBI clock
dt-bindings: soc: spacemit: k3: Add PCIe DBI clock IDs
clk: spacemit: k3: Fix PCIe clock register offset
clk: spacemit: k3: Switch to pll2_d6 as parent for PCIe clock
|
|
This patch provides basic support for the K230 clock, which covers
all clocks in K230 SoC.
The clock tree of the K230 SoC consists of a 24MHZ external crystal
oscillator, PLLs and an external pulse input for timerX, and their
derived clocks.
Co-developed-by: Troy Mitchell <TroyMitchell988@gmail.com>
Signed-off-by: Troy Mitchell <TroyMitchell988@gmail.com>
Signed-off-by: Xukai Wang <kingxukai@zohomail.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
COMMON_CLK_ROCKCHIP already gates the Rockchip clock objects inside the
Rockchip clock Makefile. Allow selecting it for COMPILE_TEST and use it
for the parent Makefile descent instead of ARCH_ROCKCHIP.
The per-SoC Rockchip clock symbols already have COMPILE_TEST dependencies,
so this exposes the existing build coverage to other architectures without
selecting the Rockchip platform.
Tested with:
make LLVM=1 ARCH=loongarch drivers/clk/rockchip/
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20260509003602.956186-1-rosenp@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
'clk-cleanup' into clk-next
* clk-samsung:
clk: samsung: exynos850: Add APM-to-AP mailbox clock
dt-bindings: clock: exynos850: Add APM_AP MAILBOX clock
clk: samsung: Use %pe format to simplify
clk: samsung: pll: Fix possible truncation in a9fraco recalc rate
clk: samsung: exynosautov920: add block G3D clock support
dt-bindings: clock: exynosautov920: add G3D clock definitions
clk: samsung: gs101: harmonise symbol names (clock arrays)
clk: samsung: artpec-9: Add initial clock support for ARTPEC-9 SoC
clk: samsung: Add clock PLL support for ARTPEC-9 SoC
dt-bindings: clock: Add ARTPEC-9 clock controller
* clk-qcom: (67 commits)
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
dt-bindings: clock: qcom: Add CMN PLL support for IPQ8074
clk: qcom: ipq-cmn-pll: Add IPQ6018 SoC support
dt-bindings: clock: qcom: Add CMN PLL support for IPQ6018
clk: qcom: gdsc: Fix error path on registration of multiple pm subdomains
dt-bindings: clock: qcom: Add missing power-domains property
clk: qcom: gcc-eliza: Enable FORCE_MEM_CORE_ON for UFS AXI PHY clock
clk: qcom: dispcc-sc7180: Add missing MDSS resets
...
* clk-round:
clk: divider: remove divider_round_rate() and divider_round_rate_parent()
clk: divider: remove divider_ro_round_rate_parent()
clk: remove round_rate() clk ops
clk: composite: convert from round_rate() to determine_rate()
clk: test: remove references to clk_ops.round_rate
* clk-sai:
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
* clk-cleanup:
clk: visconti: pll: initialize clk_init_data to zero
clk: xgene: Fix mapping leak in xgene_pllclk_init()
clk: Simplify clk_is_match()
clk: baikal-t1: Remove not-going-to-be-supported code for Baikal SoC
clk: mvebu: armada-37xx-periph: fix __iomem casts in structure init
clk: qoriq: avoid format string warning
|
|
'clk-allwinner' into clk-next
* clk-tenstorrent:
clk: tenstorrent: Add Atlantis clock controller driver
reset: tenstorrent: Add reset controller for Atlantis
dt-bindings: clk: tenstorrent: Add tenstorrent,atlantis-prcm-rcpu
* clk-rockchip:
clk: rockchip: rk3568: Add PCIe pipe clock gates
clk: rockchip: Add clock controller for the RV1103B
dt-bindings: clock: rockchip: Add RV1103B CRU support
* clk-imx:
clk: imx8mq: Correct the CSI PHY sels
clk: vf610: Add support for the Ethernet switch clocks
dt-bindings: clock: vf610: Add definitions for MTIP L2 switch
dt-bindings: clock: vf610: Drop VF610_CLK_END define
clk: vf610: Move VF610_CLK_END define to clk-vf610 driver
clk: imx: imx8-acm: fix flags for acm clocks
clk: imx: imx6q: Fix device node reference leak in of_assigned_ldb_sels()
clk: imx: imx6q: Fix device node reference leak in pll6_bypassed()
clk: imx: fracn-gppll: Add 477.4MHz support
clk: imx: fracn-gppll: Add 333.333333 MHz support
clk: imx: pll14xx: Use unsigned format specifier
dt-bindings: clock: imx6q[ul]-clock: add optional clock enet[1]_ref_pad
* clk-allwinner:
clk: sunxi-ng: sun55i-a523-r: Add missing r-spi module clock
|
|
Add clock drivers for the EIC7700 SoC. The clock controller on the ESWIN
EIC7700 provides various clocks to different IP blocks within the SoC.
Signed-off-by: Yifeng Huang <huangyifeng@eswincomputing.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com> # ebc77
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
Tested-by: Bo Gan <ganboing@gmail.com> # hfp550
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add driver for clock controller in Tenstorrent Atlantis SoC. This version
of the driver covers clocks from RCPU subsystem.
5 types of clocks generated by this controller: PLLs (PLLs
with bypass functionality and an additional Gate clk at output), Shared
Gates (Multiple Gate clks that share an enable bit), standard Muxes,
Dividers and Gates. All clocks are implemented using custom clk ops and
use the regmap interface associated with the syscon. All clocks are derived
from a 24 Mhz oscillator.
The reset controller is also setup as an auxiliary device of the clock
controller.
Signed-off-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
Prepare for long-term maintenance and future additions by introducing a
dedicated drivers/clk/aspeed/ subdirectory for ASPEED clock drivers.
Move the existing ASPEED clock drivers into the new
drivers/clk/aspeed/ subdirectory.
No functional change, file move only.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Some keystone clock drivers can be selected when COMPILE_TEST is
enabled but since commit b745c0794e2f ("clk: keystone: Add sci-clk
driver support") they are never actually built.
Enable compile testing by allowing the build system to process the
keystone drivers.
Fixes: b745c0794e2f ("clk: keystone: Add sci-clk driver support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The RPMI specification defines a clock service group which can be
accessed via SBI MPXY extension or dedicated S-mode RPMI transport.
Add mailbox client based clock driver for the RISC-V RPMI clock
service group.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Link: https://lore.kernel.org/r/20250818040920.272664-11-apatel@ventanamicro.com
[pjw@kernel.org: converted rpmi_clkrate_u64 macro to a function; replaced bare constant with a macro]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.
The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.
The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.
Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...
|
|
Add kunit test suites clk_hw_get_dev() and clk_hw_get_of_node()
for clocks registered with clk_hw_register() and of_clk_hw_register()
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20250417-clk-hw-get-helpers-v1-2-7743e509612a@baylibre.com
Reviewed-by: Brian Masney <bmasney@redhat.com>
[sboyd@kernel.org: Drop genparams, rename tests, drop inits,
combine suites, add test for non-DT platform device]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
RaspberryPi RP1 is an MFD providing, among other peripherals, several
clock generators and PLLs that drives the sub-peripherals.
Add the driver to support the clock providers.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20250529135052.28398-4-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The clock tree of K1 SoC contains three main types of clock hardware
(PLL/DDN/MIX) and has control registers split into several multifunction
devices: APBS (PLLs), MPMU, APBC and APMU.
All register operations are done through regmap to ensure atomicity
between concurrent operations of clock driver and reset,
power-domain driver that will be introduced in the future.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-4-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
'clk-bindings' into clk-next
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- Convert more clk bindings to YAML
* clk-mobileye:
clk: eyeq: add EyeQ6H west fixed factor clocks
clk: eyeq: add EyeQ6H central fixed factor clocks
clk: eyeq: add EyeQ5 fixed factor clocks
clk: eyeq: add fixed factor clocks infrastructure
clk: eyeq: require clock index with phandle in all cases
clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
clk: eyeq: add driver
clk: divider: Introduce CLK_DIVIDER_EVEN_INTEGERS flag
dt-bindings: clock: add Mobileye EyeQ6L/EyeQ6H clock indexes
Revert "dt-bindings: clock: mobileye,eyeq5-clk: add bindings"
* clk-twl:
clk: twl: add TWL6030 support
clk: twl: remove is_prepared
* clk-nuvoton:
clk: npcm8xx: add clock controller
reset: npcm: register npcm8xx clock auxiliary bus device
dt-bindings: reset: npcm: add clock properties
* clk-renesas:
clk: renesas: vbattb: Add VBATTB clock driver
clk: Add devm_clk_hw_register_gate_parent_hw()
clk: renesas: rzg2l: Fix FOUTPOSTDIV clk
dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
clk: renesas: r9a08g045: Add power domain for RTC
clk: renesas: r9a08g045: Mark the watchdog and always-on PM domains as IRQ safe
clk: renesas: rzg2l-cpg: Use GENPD_FLAG_* flags instead of local ones
clk: renesas: rzg2l-cpg: Move PM domain power on in rzg2l_cpg_pd_setup()
dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC
clk: renesas: r8a779h0: Drop CLK_PLL2_DIV2 to clarify ZCn clocks
clk: renesas: r9a09g057: Add clock and reset entries for ICU
clk: renesas: r9a09g057: Add CA55 core clocks
clk: renesas: Remove duplicate and trailing empty lines
* clk-bindings:
dt-bindings: clock: actions,owl-cmu: convert to YAML
dt-bindings: clock: ti: Convert mux.txt to json-schema
dt-bindings: clock: ti: Convert divider.txt to json-schema
dt-bindings: clock: ti: Convert interface.txt to json-schema
dt-bindings: clock: convert rockchip,rk3328-cru.txt to YAML
|
|
Add Mobileye EyeQ5, EyeQ6L and EyeQ6H clock controller driver. It is
both a platform driver and a hook onto of_clk_init() used for clocks
required early (GIC timer, UARTs).
For some compatible, it is both at the same time. eqc_early_init()
initialises early PLLs and exposes its own clock provider. It marks
other clocks as deferred. eqc_probe() adds all remaining clocks using
another clock provider.
It exposes read-only PLLs derived from the main crystal on board.
It also exposes another type of clocks: divider clocks.
They always have even divisors and have one PLL as parent.
This driver also bears the responsability for optional reset and pinctrl
auxiliary devices. The match data attached to the devicetree node
compatible indicate if such devices should be created. They all get
passed a pointer to the start of the OLB region.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241023-mbly-clk-v6-1-ca83e43daf93@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add auxiliary driver to support Nuvoton Arbel BMC NPCM8XX contains an
integrated clock controller which generates and supplies clocks to all
modules within the BMC.
The NPCM8xx clock controller is created using the auxiliary device
framework and set up in the npcm reset driver since the NPCM8xx clock is
using the same register region.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Tested-by: Benjamin Fair <benjaminfair@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240912191038.981105-4-tmaimon77@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add unit tests for the two types of assigned rate properties. Test
different combinations of assigned clocks and make sure that rates
aren't assigned when the DT properties are malformed or are zero.
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240822002433.1163814-4-sboyd@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
Rewrite EP93xx clock driver located in arch/arm/mach-ep93xx/clock.c
trying to do everything the device tree way:
- provide clock acces via of
- drop clk_hw_register_clkdev
- drop init code and use module_auxiliary_driver
Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Test that clks registered with 'struct clk_parent_data' work as
intended and can find their parents.
Cc: Christian Marangi <ansuelsmth@gmail.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-9-sboyd@kernel.org
|
|
Test that the fixed rate basic type clk works as intended.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-8-sboyd@kernel.org
|
|
Unit tests are more ergonomic and simpler to understand if they don't
have to hoist a bunch of code into the test harness init and exit
functions. Add some test managed wrappers for the clk APIs so that clk
unit tests can write more code in the actual test and less code in the
harness.
Only add APIs that are used for now. More wrappers can be added in the
future as necessary.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-7-sboyd@kernel.org
|
|
Add support for the AP sub-system clock controller in the T-Head TH1520.
This include CPU, DPU, GMAC and TEE PLLs.
Link: https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
Co-developed-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Co-developed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/r/20240711-th1520-clk-v3-2-6ff17bb318fb@tenstorrent.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add clock definition and driver code for CV1800 SoC.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Link: https://github.com/milkv-duo/duo-files/blob/6f4e9b8ecb459e017cca1a8df248a19ca70837a3/duo/datasheet/CV180X-Clock-v1.xlsx
Link: https://github.com/milkv-duo/duo-files/blob/6f4e9b8ecb459e017cca1a8df248a19ca70837a3/duo/datasheet/CV1800B-CV1801B-Preliminary-Datasheet-full-en.pdf
Link: https://lore.kernel.org/r/IA1PR20MB49534F37F802CAF117364D66BB262@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Move all STM32MP clock drivers into same directory (stm32).
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20231208143700.354785-2-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
'clk-frac-divider' into clk-next
- Make clk kunit tests work with lockdep
- Fix clk gate kunit test for big-endian
- Convert more than a handful of clk drivers to use regmap maple tree
- Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk
implementation
* clk-renesas: (23 commits)
clk: renesas: r9a08g045: Add clock and reset support for SDHI1 and SDHI2
clk: renesas: rzg2l: Use %x format specifier to print CLK_ON_R()
clk: renesas: Add minimal boot support for RZ/G3S SoC
clk: renesas: rzg2l: Add divider clock for RZ/G3S
clk: renesas: rzg2l: Refactor SD mux driver
clk: renesas: rzg2l: Remove CPG_SDHI_DSEL from generic header
clk: renesas: rzg2l: Add struct clk_hw_data
clk: renesas: rzg2l: Add support for RZ/G3S PLL
clk: renesas: rzg2l: Remove critical area
clk: renesas: rzg2l: Fix computation formula
clk: renesas: rzg2l: Trust value returned by hardware
clk: renesas: rzg2l: Lock around writes to mux register
clk: renesas: rzg2l: Wait for status bit of SD mux before continuing
clk: renesas: rcar-gen3: Extend SDnH divider table
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
clk: renesas: r8a7795: Constify r8a7795_*_clks
clk: renesas: r9a06g032: Name anonymous structs
clk: renesas: r9a06g032: Fix kerneldoc warning
clk: renesas: rzg2l: Use u32 for flag and mux_flags
clk: renesas: rzg2l: Use FIELD_GET() for PLL register fields
...
* clk-kunit:
clk: Fix clk gate kunit test on big-endian CPUs
clk: Parameterize clk_leaf_mux_set_rate_parent
clk: Drive clk_leaf_mux_set_rate_parent test from clk_ops
* clk-regmap:
clk: versaclock7: Convert to use maple tree register cache
clk: versaclock5: Convert to use maple tree register cache
clk: versaclock3: Convert to use maple tree register cache
clk: versaclock3: Remove redundant _is_writeable()
clk: si570: Convert to use maple tree register cache
clk: si544: Convert to use maple tree register cache
clk: si5351: Convert to use maple tree register cache
clk: si5341: Convert to use maple tree register cache
clk: si514: Convert to use maple tree register cache
clk: cdce925: Convert to use maple tree register cache
* clk-frac-divider:
clk: fractional-divider: tests: Add test suite for edge cases
clk: fractional-divider: Improve approximation when zero based and export
|
|
The TWL6032 has some clock outputs which are controlled like
fixed-voltage regulators, in some drivers for these chips
found in the wild, just the regulator api is abused for controlling
them, so simply use something similar to the regulator functions.
Due to a lack of hardware available for testing, leave out the
TWL6030-specific part of those functions.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20230916100515.1650336-5-andreas@kemnade.info
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
In light of the recent discovery that the fractional divisor
approximation does not utilize the full available range for clocks that
are flagged CLK_FRAC_DIVIDER_ZERO_BASED [1], implement tests for the
edge cases of this clock type.
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/lkml/20230529133433.56215-1-frank@oltmanns.dev [1]
Link: https://lore.kernel.org/r/20230617131041.18313-3-frank@oltmanns.dev
[sboyd@kernel.org: Rename suite and tests slightly, drop unused
includes, store parent rate to compare instead of repeating equation]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
'clk-rockchip' into clk-next
- Add Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
- Introduce kstrdup_and_replace() and use it
* clk-versa:
clk: vc7: Use i2c_get_match_data() instead of device_get_match_data()
clk: vc5: Use i2c_get_match_data() instead of device_get_match_data()
clk: versaclock3: Switch to use i2c_driver's probe callback
clk: Add support for versa3 clock driver
dt-bindings: clock: Add Renesas versa3 clock generator bindings
* clk-strdup:
clk: ti: Replace kstrdup() + strreplace() with kstrdup_and_replace()
clk: tegra: Replace kstrdup() + strreplace() with kstrdup_and_replace()
driver core: Replace kstrdup() + strreplace() with kstrdup_and_replace()
lib/string_helpers: Add kstrdup_and_replace() helper
* clk-amlogic: (22 commits)
dt-bindings: soc: amlogic: document System Control registers
dt-bindings: clock: amlogic: convert amlogic,gxbb-aoclkc.txt to dt-schema
dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
clk: meson: axg-audio: move bindings include to main driver
clk: meson: meson8b: move bindings include to main driver
clk: meson: a1: move bindings include to main driver
clk: meson: eeclk: move bindings include to main driver
clk: meson: aoclk: move bindings include to main driver
dt-bindings: clk: axg-audio-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-pll-clkc: expose all clock ids
dt-bindings: clk: amlogic,a1-peripherals-clkc: expose all clock ids
dt-bindings: clk: meson8b-clkc: expose all clock ids
dt-bindings: clk: g12a-aoclkc: expose all clock ids
dt-bindings: clk: g12a-clks: expose all clock ids
dt-bindings: clk: axg-clkc: expose all clock ids
dt-bindings: clk: gxbb-clkc: expose all clock ids
clk: meson: migrate axg-audio out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson8b out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate a1 clock drivers out of hw_onecell_data to drop NR_CLKS
clk: meson: migrate meson-aoclk out of hw_onecell_data to drop NR_CLKS
...
* clk-allwinner:
clk: sunxi-ng: nkm: Prefer current parent rate
clk: sunxi-ng: a64: select closest rate for pll-video0
clk: sunxi-ng: div: Support finding closest rate
clk: sunxi-ng: mux: Support finding closest rate
clk: sunxi-ng: nkm: Support finding closest rate
clk: sunxi-ng: nm: Support finding closest rate
clk: sunxi-ng: Add helper function to find closest rate
clk: sunxi-ng: Add feature to find closest rate
clk: sunxi-ng: a64: allow pll-mipi to set parent's rate
clk: sunxi-ng: nkm: consider alternative parent rates when determining rate
clk: sunxi-ng: nkm: Use correct parameter name for parent HW
clk: sunxi-ng: Modify mismatched function name
clk: sunxi: sun9i-mmc: Use devm_platform_get_and_ioremap_resource()
* clk-rockchip:
clk: rockchip: rv1126: Add PD_VO clock tree
clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
clk: rockchip: rk3568: Add PLL rate for 101MHz
|
|
Add support for Renesas versa3 clock driver(5p35023).
The clock generator provides 6 output clocks.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230705171000.85786-3-biju.das.jz@bp.renesas.com
[sboyd@kernel.org: Add newline to printk]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 clock driver.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-1-fb6ab3dea87c@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The clock controller generates clocks for the whole chip, including
system clocks and all peripheral clocks. This driver support ma35d1
clock gating, divider, and individual PLL configuration.
There are 6 PLLs in ma35d1 SoC:
- CA-PLL for the two Cortex-A35 CPU clock
- SYS-PLL for system bus, which comes from the companion MCU
and cannot be programmed by clock controller.
- DDR-PLL for DDR
- EPLL for GMAC and GFX, Display, and VDEC IPs.
- VPLL for video output pixel clock
- APLL for SDHC, I2S audio, and other IPs.
CA-PLL has only one operation mode.
DDR-PLL, EPLL, VPLL, and APLL are advanced PLLs which have 3
operation modes: integer mode, fraction mode, and spread specturm mode.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
- Shrink size of clk_fractional_divider a little
- Convert various clk drivers to devm_of_clk_add_hw_provider()
* clk-starfive:
clk: starfive: Delete the redundant dev_set_drvdata() in JH7110 clock drivers
clk: starfive: Avoid casting iomem pointers
MAINTAINERS: generalise StarFive clk/reset entries
reset: starfive: Add StarFive JH7110 reset driver
clk: starfive: Add StarFive JH7110 always-on clock driver
clk: starfive: Add StarFive JH7110 system clock driver
reset: starfive: jh71x0: Use 32bit I/O on 32bit registers
reset: starfive: Rename "jh7100" to "jh71x0" for the common code
reset: starfive: Extract the common JH71X0 reset code
reset: starfive: Factor out common JH71X0 reset code
reset: Create subdirectory for StarFive drivers
reset: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
clk: starfive: Rename "jh7100" to "jh71x0" for the common code
clk: starfive: Rename clk-starfive-jh7100.h to clk-starfive-jh71x0.h
clk: starfive: Factor out common JH7100 and JH7110 code
clk: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
* clk-fractional:
clk: Remove mmask and nmask fields in struct clk_fractional_divider
clk: rockchip: Remove values for mmask and nmask in struct clk_fractional_divider
clk: imx: Remove values for mmask and nmask in struct clk_fractional_divider
clk: Compute masks for fractional_divider clk when needed.
* clk-devmof:
clk: uniphier: Use managed `of_clk_add_hw_provider()`
clk: si5351: Use managed `of_clk_add_hw_provider()`
clk: si570: Use managed `of_clk_add_hw_provider()`
clk: si514: Use managed `of_clk_add_hw_provider()`
clk: lmk04832: Use managed `of_clk_add_hw_provider()`
clk: hsdk-pll: Use managed `of_clk_add_hw_provider()`
clk: cdce706: Use managed `of_clk_add_hw_provider()`
clk: axs10x: Use managed `of_clk_add_hw_provider()`
clk: axm5516: Use managed `of_clk_add_hw_provider()`
clk: axi-clkgen: Use managed `of_clk_add_hw_provider()`
|
|
'clk-socfpga' into clk-next
- Frequency Hopping (FHCTL) on MediaTek MT6795, MT8173, MT8192 and
MT8195 SoCs
- Converted most Mediatek clock drivers to struct platform_driver
- MediaTek clock drivers can be built as modules
- Mediatek MT8188 SoC clk drivers
- Clock driver for Sunplus SP7021 SoC
- Reimplement Loongson-1 clk driver with DT support
- Clk driver support for Loongson-2 SoCs
- Migrate socfpga clk driver to of_clk_add_hw_provider()
* clk-mediatek: (84 commits)
clk: mediatek: fhctl: Mark local variables static
clk: mediatek: Use right match table, include mod_devicetable
clk: mediatek: Add MT8188 adsp clock support
clk: mediatek: Add MT8188 imp i2c wrapper clock support
clk: mediatek: Add MT8188 wpesys clock support
clk: mediatek: Add MT8188 vppsys1 clock support
clk: mediatek: Add MT8188 vppsys0 clock support
clk: mediatek: Add MT8188 vencsys clock support
clk: mediatek: Add MT8188 vdosys1 clock support
clk: mediatek: Add MT8188 vdosys0 clock support
clk: mediatek: Add MT8188 vdecsys clock support
clk: mediatek: Add MT8188 mfgcfg clock support
clk: mediatek: Add MT8188 ipesys clock support
clk: mediatek: Add MT8188 imgsys clock support
clk: mediatek: Add MT8188 ccusys clock support
clk: mediatek: Add MT8188 camsys clock support
clk: mediatek: Add MT8188 infrastructure clock support
clk: mediatek: Add MT8188 peripheral clock support
clk: mediatek: Add MT8188 topckgen clock support
clk: mediatek: Add MT8188 apmixedsys clock support
...
* clk-sunplus:
clk: Add Sunplus SP7021 clock driver
* clk-loongson:
clk: clk-loongson2: add clock controller driver support
dt-bindings: clock: add loongson-2 boot clock index
MAINTAINERS: remove obsolete file entry in MIPS/LOONGSON1 ARCHITECTURE
MIPS: loongson32: Update the clock initialization
clk: loongson1: Re-implement the clock driver
clk: loongson1: Remove the outdated driver
dt-bindings: clock: Add Loongson-1 clock
* clk-socfpga:
clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling
clk: socfpga: use of_clk_add_hw_provider and improve error handling
clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling
clk: socfpga: use of_clk_add_hw_provider and improve error handling
clk: socfpga: arria10: use of_clk_add_hw_provider and improve error handling
clk: socfpga: use of_clk_add_hw_provider and improve error handling
|
|
Using ARCH_FOO symbol is preferred than SOC_FOO.
Set obj-y for starfive/ in Makefile, so the StarFive drivers
can be compiled with COMPILE_TEST=y but ARCH_STARFIVE=n.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
This driver provides support for clock controller on Loongson-2 SoC,
the Loongson-2 SoC uses a 100MHz clock as the PLL reference clock,
there are five independent PLLs inside, each of which PLL can
provide up to three sets of frequency dependent clock outputs.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Link: https://lore.kernel.org/r/20230323025229.2971-2-zhuyinbo@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add driver for the Skyworks Si521xx PCIe clock generators. Supported models
are Si52144/Si52146/Si52147, tested model is Si52144. It should be possible
to add Si5213x series as well.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230118191521.15544-2-marex@denx.de
[sboyd@kernel.org: Make clk_ops const]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
