| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core: added ISP statistics support and per-block validation
- v4l2-core: Allow unknown HDR10 white point and luminance
- New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor
- New codec: Milos: VPU v2.0 codec support
- isp driver: gained support for Dreamchip RPPX1 ISP framework
- vsp1 driver: gained support for RZ/T2H and RZ/N2H
- Novalake driver: gained CVS support for new NVL hardware
- dvb-core: fix feed leak on failed DMX_ADD_PID
- several driver fixes, cleanups and minor improvements
* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
media: ipu-bridge: check all DMI entries when overriding sensor rotation
media: v4l2-async: avoid deleting unlinked ASC entry on link error
media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
media: intel/ipu6: fix async notifier cleanup leak on parse error
media: staging/ipu7: fix async notifier UAF on probe error path
media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
media: rcar-isp: Fix VSPX reference leaks
media: rcar-isp: Release ISPCORE resources
media: i2c: imx415: Release runtime PM reference on VBLANK error
media: i2c: imx415: Return test pattern write errors
media: renesas: vsp1: Declare index variables in for loop statement
media: renesas: vsp1: Make reset control optional to support platforms without a reset line
media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
media: nxp: imx8-isi: Add additional 32-bit RGB format support
media: nxp: imx8-isi: Add 16-bit raw Bayer format support
media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
media: nxp: imx8-isi: Correct color map between V4L2 and ISI
...
|
|
Since commit
55b48e23f5c4 ("genirq/devres: Add error handling in devm_request_*_irq()"),
devm_request_threaded_irq() automatically logs detailed error messages on
failure. Remove the now-redundant driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Since commit
55b48e23f5c4 ("genirq/devres: Add error handling in devm_request_*_irq()"),
devm_request_threaded_irq() automatically logs detailed error messages on
failure. Remove the now-redundant driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Since commit
55b48e23f5c4 ("genirq/devres: Add error handling in devm_request_*_irq()"),
devm_request_threaded_irq() automatically logs detailed error messages on
failure. Remove the now-redundant driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add a new debugfs entry that makes it possible to do
error injection of failing the next N transmits by a
timeout.
This can be used to test what happens in that case during
the claiming of a free logical address.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If we inject an Arbitration Lost error, then manually toggle rx_toggle
instead of waiting for cec_pin_to_idle(). When handling the Arbitration
Lost error injection we are switching to TX mode, and as a result when
cec_pin_to_idle() is called when the transmit ends it would never toggle
rx_toggle since it is no longer in RX mode.
Without this change the 'any,toggle rx-arb-lost' error injection
would, once it is on, always stay on.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If claiming a logical address fails, then set the
CEC_LOG_ADDRS_FL_CONFIG_FAILED flag. This makes it possible for
userspace to detect this corner case.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If the physical address becomes invalid, then flush any
old STATE_CHANGE events since those are no longer relevant.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
No need to call cec_post_state_event() if the next call
is to cec_adap_unconfigure() since that will also call
cec_post_state_event().
This fixes the case when, when the physical address is
invalidated, you get two CEC_EVENT_STATE_CHANGE events:
one with a non-zero log_addr_mask and one with a zero
log_addr_mask.
You just want to see the event with phys_addr set to
f.f.f.f and log_addr_mask set to 0.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently there is a distinction between core events
(CEC_EVENT_STATE_CHANGE and CEC_EVENT_LOST_MSGS) and other
events. The core events do not require memory allocations,
so are a bit faster, but they are also limited to just a
single event: if a new event comes in, then that replaces
the old one.
It's all overly complicated, and with only one state change
event it is easy to miss state changes.
So just drop that optimization, and allow for up to 3
state change events.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When claiming a logical address, don't break off the process
when the transmit returns ABORTED or TIMEOUT. Just do another
attempt in that case.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Rename max_retries to max_attempts. This counter really
is for the number of attempts, not the number of retries.
Also increase the number of attempts from 2 to 3.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Keep track of Rx Low Drive conditions. Useful for detecting
potential hardware/cable problems as it suggests unstable or
incorrect voltage levels.
Note that the Tx Low Drive conditions are already logged in
the CEC core.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The Tegra CEC hardware has a bug where, if the first attempt
to transmit a message is NACKed so the transmit is aborted,
then the second attempt can contain corrupt data.
Ensure that the full message is always transmitted to avoid hitting
this bug.
I suspect some internal state is not reset in the case of aborting
a message due to a NACK.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
cec_receive_notify() reads the exclusive follower pointer without the
adapter lock. Serialize the no-follower check and message delivery
against mode changes and release.
Fixes: 9881fe0ca187 ("[media] cec: add HDMI CEC framework (adapter)")
Cc: stable@vger.kernel.org
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver has an OF match table wired to .of_match_table, but does
not export the table with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE(of, ...) entry so module alias
information is generated for OF based module autoloading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the platform driver, and the missing module alias publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Instead of relying on custom MS_TO_US() macro, use existing time
multiplier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Instead of relying on custom MS_TO_US() macro, use existing time
multiplier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
When create a debugfs folder or device nodes we use actual subsystem
name. But in some cases it's hardcoded, while in other it uses predefined
string literal. Make it consistently use CEC_NAME.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Several prints inconsistently use cec: or cec-%s: or nothing. To make
it clear which prints come from cec-core.c, add a pr_fmt() macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: also change kernel_thread to kthread_run in comment]
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Use DEFINE_SHOW_STORE_ATTRIBUTE() helper for read-write file to reduce some
duplicated code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add missing mutex_destroy() call to error path and remove to properly
clean up the mutex initialized during adapter allocation. Ensure proper
resource cleanup and follows kernel practices.
Found by code review.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Consolidate error path in cec_allocate_adapter() so next changes
will be less verbose.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
cec_pin_update() fills work_pin_events[] and work_pin_ts[], then
increments work_pin_num_events. cec_pin_thread_func() uses that counter
to decide when to read the FIFO entries.
Do not let the counter update be observed without the event update. Also
do not let a freed slot be reused before the thread has finished reading
it. Use release operations when publishing an entry and releasing a slot,
and acquire operations when consuming those counter updates.
Leave the other work_pin_num_events users as they do not participate in
this FIFO publication path.
Fixes: ea5c8ef29668 ("media: cec-pin: add low-level pin hardware support")
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
stm32_cec_adap_log_addr() waits for TXSOM to clear before disabling CEC
and updating the logical address registers. The wait result is ignored,
so a timeout can still be reported as a successful logical address
update.
Return the polling error before touching the address registers. Compute
the address mask only for valid logical addresses so the invalid-address
path does not evaluate a shift based on CEC_LOG_ADDR_INVALID.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
cec_transmit_msg_fh() drops adap->lock to wait for a blocking transmit in
wait_for_completion_killable(). If that wait is interrupted by a signal,
cancel_delayed_work_sync() can run before the CEC kthread arms the reply
timeout via schedule_delayed_work(&data->work) in cec_transmit_done_ts().
The work is then armed after the cancel, and the data is freed with its
delayed_work still pending:
ODEBUG: free active (active state 0) object: ... hint: cec_wait_timeout
Use disable_delayed_work_sync(): it cancels the work and disables it, so
the later schedule_delayed_work() becomes a no-op and the work cannot be
re-armed. The data is freed right after, so it need not be re-enabled.
Fixes: 490d84f6d73c ("media: cec: forgot to cancel delayed work")
Reported-by: syzbot+051024d603432b4ab395@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=051024d603432b4ab395
Suggested-by: Hillf Danton <hdanton@sina.com>
Cc: stable@vger.kernel.org
Signed-off-by: Biren Pandya <birenpandya@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add check to prevent overflowing msg.msg[] in case the incoming data
is malformed.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Reviewed-by: Sean Young <sean@mess.org>
Fixes: 056f2821b631 ("media: cec: extron-da-hd-4k-plus: add the Extron DA HD 4K Plus CEC driver")
Cc: stable@vger.kernel.org
|
|
stm32_rx_done() appends each received CEC byte to rx_msg.msg[] using
rx_msg.len as the write index, incrementing it on every RXBR
(receive-byte-ready) interrupt without checking it against the buffer
size:
cec->rx_msg.msg[cec->rx_msg.len++] = val & 0xFF;
rx_msg.msg[] is a fixed CEC_MAX_MSG_SIZE (16) byte array in struct
cec_msg, and rx_msg.len is only reset on RXACKE/RXOVR or after a
completed message (RXEND). The number of bytes received before RXEND is
decided by the remote CEC device (it sets EOM), not by the driver. A
peer that keeps sending bytes without ending the message drives RXBR
repeatedly, pushing rx_msg.len past 16 and writing peer-controlled bytes
out of bounds into the surrounding memory. This is reachable in normal
operation once the driver has probed and receiving is enabled, from the
IRQ thread, without any local privilege.
The length check in the CEC core runs on the consumer side, after the
byte has been stored, so it does not prevent the overflow. Bound the
index in the driver before the store, as the other platform CEC drivers
already do (e.g. tegra_cec), dropping the excess bytes of an overlong
frame.
Found by static analysis tool CodeQL.
Fixes: d69ae57453c8 ("[media] cec: add STM32 cec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Weigang He <geoffreyhe2@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The commit dccc0c3ddf8f ("media: rc: fix race between unregister and
urb/irq callbacks") removed the implicit call to rc_free_device() from
rc_unregister_device(). However, the commit missed to remove the NULL
assignment of adap->rc that is now causing rc_free_device() to never be
called on an allocated rc device.
kmemleak reports following after e.g. dw-hdmi unbind:
unreferenced object 0xffff00010ac10000 (size 4096):
comm "kworker/u16:1", pid 39, jiffies 4294897739
hex dump (first 32 bytes):
20 23 4b 0a 01 00 ff ff 08 00 c1 0a 01 00 ff ff #K.............
08 00 c1 0a 01 00 ff ff 00 00 00 00 00 00 00 00 ................
backtrace (crc e11baccc):
kmemleak_alloc+0x38/0x44
__kmalloc_cache_noprof+0x4a8/0x5e0
rc_allocate_device+0x48/0x2a0
cec_allocate_adapter+0x3ac/0x800
dw_hdmi_cec_probe+0x264/0x634
platform_probe+0xc0/0x188
really_probe+0x4a4/0x8e0
__driver_probe_device+0x2f8/0x440
driver_probe_device+0x60/0x160
__device_attach_driver+0x1a0/0x2a0
bus_for_each_drv+0x100/0x1a0
__device_attach+0x174/0x350
device_initial_probe+0x90/0xb0
bus_probe_device+0x4c/0x120
device_add+0xdec/0x116c
platform_device_add+0x354/0x598
Remove the assignment of adap->rc to NULL to let cec_delete_adapter()
free the allocated rc device after last user of the cec device exits to
fix the kmemleak.
Fixes: dccc0c3ddf8f ("media: rc: fix race between unregister and urb/irq callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver registers two regmaps on the same platform device: an MMIO
regmap for the AO CEC registers, and an indirect regmap (using
reg_read()/reg_write() callbacks) for the CEC controller core registers.
Neither regmap_config sets a .name, so both default their debugfs
directory to the device name and collide:
debugfs: 'ff800280.cec' already exists in 'regmap'
Because of the clash the second regmap's debugfs directory fails to
register, so its registers can no longer be inspected via debugfs.
Give the indirect CEC core regmap a distinct name. The two debugfs
directories then become "<dev>.cec" and "<dev>.cec-core". This only
affects debugfs naming; register access is unchanged.
Tested on an ODROID-N2 (Amlogic S922X): the warning is gone and both
/sys/kernel/debug/regmap/ff800280.cec and ff800280.cec-core are present.
Fixes: b7778c46683c ("media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Yi Ding <yi.s.ding@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace and commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for the new CEC LIP opcodes.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Link: https://patch.msgid.link/9fb27f4a2133cf46b8e0fc126c2d1ef8b1bc30e1.1779115235.git.hverkuil+cisco@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-ID: <9fb27f4a2133cf46b8e0fc126c2d1ef8b1bc30e1.1779115235.git.hverkuil+cisco@kernel.org>
|
|
If secocec_ir_probe() fails after cec_register_adapter() succeeds,
probe returns an error and the driver remove callback is not called.
The current unwind path unregisters the notifier and then falls through
to cec_delete_adapter(), which violates the CEC adapter lifetime rules
after a successful registration.
Add a registered-adapter unwind path that unregisters the notifier and
the adapter instead.
Fixes: daef95769b3a ("media: seco-cec: add Consumer-IR support")
Cc: stable@vger.kernel.org
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Google Dirkson device uses the same approach as the Google Brask
which enables the HDMI CEC via the cros-ec-cec driver.
Signed-off-by: Kells Ping <kells.ping@quanta.corp-partner.google.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The Google Kulnex and Moxoe device uses the same approach as Google Brask
which enables the HDMI CEC via the cros-ec-cec driver.
Signed-off-by: Ken Lin <kenlin5@quanta.corp-partner.google.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Some rc device drivers have a race condition between rc_unregister_device()
and irq or urb callbacks. This is because rc_unregister_device() does two
things, it marks the device as unregistered so no new commands can be
issued and then it calls rc_free_device(). This means the driver has no
chance to cancel any pending urb callbacks or interrupts after the device
has been marked as unregistered. Those callbacks may access struct rc_dev
or its members (e.g. struct ir_raw_event_ctrl), which have been freed by
rc_free_device().
This change removes the implicit call to rc_free_device() from
rc_unregister_device(). This means that device drivers can call
rc_unregister_device() in their remove or disconnect function, then cancel
all the urbs and interrupts before explicitly calling rc_free_device().
Note this is an alternative fix for an issue found by Haotian Zhang, see
the Closes: tags.
Reported-by: Haotian Zhang <vulab@iscas.ac.cn>
Closes: https://lore.kernel.org/linux-media/20251114101432.2566-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114101418.2548-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114101346.2530-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114090605.2413-1-vulab@iscas.ac.cn/
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
In the event that the cec dev node is held open while the adapter is
disconnected the serio device will be cleaned up but the cec device won't
be. As the serio device is freed but the ping_eeprom_work is not canceled,
the next ping will still attempt to send, leading to a kernel oops.
This patch both cancels the ping_eeprom_work in the serio cleanup as well
as checking to make sure the serio is still present before attempting to
write to it. Note that while the added serio = NULL line looks similar to
one that was removed in commit 024e01dead12c ("media: pulse8-cec: fix
duplicate free at disconnect or probe error"), it notably happens before
calling cec_unregister_adapter, and as such shouldn't lead to the
user-after-free that removing it fixed.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In cec_devnode_init(), the debugfs directory created with
debugfs_create_dir() is not removed if bus_register() fails.
This leaves a stale "cec" entry in debugfs and prevents
proper module reloading.
Fix this by removing the debugfs directory in the error path.
Fixes: a56960e8b406 ("[media] cec: add HDMI CEC framework (core)")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Replace hverkuil@xs4all.nl by hverkuil@kernel.org.
Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Replace hansverk@cisco.com by hverkuil@kernel.org.
Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When using MMIO with regmap, fast_io is implied. No need to set it
again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Delete the external-module style Makefile commands. They are not needed
for in-tree modules.
This is the only Makefile in the kernel tree (aside from tools/ and
samples/) that uses this Makefile style.
The same files are built with or without this patch.
Fixes: 056f2821b631 ("media: cec: extron-da-hd-4k-plus: add the Extron DA HD 4K Plus CEC driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The second argument to the ioctl handlers is not a file handle any more.
The standard practice is to name it 'void *priv' in drivers. Many
drivers still name it 'void *fh', and a few use more exotic names.
Replace those more exotic names with 'void *priv' in all media drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jai Luthra <jai.luthra@linux.dev>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Reading the hpd or 5v gpios is something that can sleep, so rework
the code to allow this.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Ensure that the interrupt function names clearly state for which
gpio they are (cec/hpd/5v). No functional changes.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
