| Age | Commit message (Collapse) | Author |
|---|
|
Pull more SCSI updates from Martin Petersen:
"Remaining updates for the 7.3 merge window. The only core change is
enabling context analysis for the SCSI layer and UFS.
The remaining changes are either bug fixes or hardening"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi: (26 commits)
scsi: snic: Fix SCSI host leak on workqueue allocation failure
scsi: MAINTAINERS: Update my email address
scsi: MAINTAINERS: Leave the cumana_1 and oak drivers to the RISCPC maintainers
scsi: leapraid: Standardize NCQ priority sysfs attributes
scsi: leapraid: Serialize firmware log mmap with teardown
scsi: leapraid: Balance host references for firmware log VMAs
scsi: lpfc: Remove unnnecessary NULL check
scsi: qla2xxx: Fix an loop timeout test
scsi: qla2xxx: Fix an error code in qla_get_tmf()
scsi: ibmvfc: Fix use of uninitialized rport in ibmvfc_do_work()
scsi: core: Enable context analysis for hosts.o
scsi: lpfc: Replace strlcat() with sysfs_emit_at() in the sysfs show functions
scsi: lpfc: Replace strlcat() with seq_buf in the debugfs dump helpers
scsi: lpfc: Replace strlcat() with seq_buf in lpfc_rx_monitor_report()
scsi: lpfc: Replace strlcat() with scnprintf() in lpfc_vport_symbolic_node_name()
scsi: lpfc: Replace strlcat() with seq_buf in lpfc_info()
scsi: core: Enable context analysis
scsi: core: Protect host state changes with the host lock
scsi: core: Add lock context annotations
scsi: core: Pass the SCSI host pointer directly to scanning functions
...
|
|
The "evt_dat" variale is non-NULL at this point so there is no need to
check. Delete the check and pull the code in a tab.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Paul Ely <paul.ely@broadcom.com>
Link: https://patch.msgid.link/an1trOAUeQmYEus_@stanley.mountain
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
In preparation for removing the strlcat() API[1], replace its uses in
lpfc_cmf_info_show(), lpfc_nvme_info_show() and lpfc_scsi_stat_show().
The three functions build sysfs attribute output, and sysfs_emit_at() is
the designated helper for that. The single write paths become
sysfs_emit(), the offset zero form of the same helper. Each intermediate
tmp buffer and its per fragment overflow check become unnecessary. Once
the page is full, sysfs_emit_at() writes nothing more, so dropping the
early exits does not change the produced bytes. Each loop that appends
keeps one exit, so a full page stops the iteration. In
lpfc_nvme_info_show() the exit also releases the fc_nodes_list_lock as
it did before. The unlock_buf_done label loses its last user and is
removed.
The old code capped every fragment at LPFC_MAX_INFO_TMP_LEN or
LPFC_MAX_SCSI_INFO_TMP_LEN bytes before appending it. The replacement
formats each fragment directly into the page, so a fragment longer than
its old tmp buffer is no longer truncated when the page has room for
it. Both macros lose their last user and are removed.
The running length that sysfs_emit_at() maintains equals the length that
the removed strnlen() calls computed, so the "Could be more info"
overflow markers keep their trigger condition.
Link: https://github.com/KSPP/linux/issues/370 [1]
Signed-off-by: Ian Bridges <icb@fastmail.org>
Link: https://patch.msgid.link/20260729144617.1388646-6-icb@fastmail.org
Reviewed-by: Nigel Kirkland <nigel.kirkland@broadcom.com>
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
In preparation for removing the strlcat() API[1], replace its uses in
lpfc_debugfs_multixripools_data(), lpfc_debugfs_scsistat_data() and
lpfc_debugfs_hdwqstat_data().
Each helper accumulates a variable number of lines into the debugfs
buffer, which is what seq_buf is for. The intermediate tmp buffers and
the per fragment overflow checks become unnecessary. Once a seq_buf
overflows, later writes to it do nothing, so dropping the early exits
does not change the produced bytes. Each loop that appends keeps one
seq_buf_has_overflowed() exit, so a full buffer stops the iteration.
lpfc_debugfs_multixripools_data() and lpfc_debugfs_hdwqstat_data()
append to whatever the buffer already holds, so their seq_buf is
anchored at the current end of the string. All three helpers keep
returning strnlen() because seq_buf_used() reports the full buffer size
after an overflow.
Link: https://github.com/KSPP/linux/issues/370 [1]
Signed-off-by: Ian Bridges <icb@fastmail.org>
Link: https://patch.msgid.link/20260729144617.1388646-5-icb@fastmail.org
Reviewed-by: Nigel Kirkland <nigel.kirkland@broadcom.com>
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
In preparation for removing the strlcat() API[1], replace its use in
lpfc_rx_monitor_report().
The function accumulates one line per ring entry, which is what seq_buf
is for. seq_buf tracks the write position, so the per entry strlen()
rescans of the destination are gone. Each record is still formatted into
the tmp buffer. seq_buf_puts() appends it only when it fits whole, so
the output keeps ending at the last complete record. The loop still
stops on overflow without consuming the current entry, and the returned
count and the ring head keep their old meaning. The produced bytes are
unchanged.
Link: https://github.com/KSPP/linux/issues/370 [1]
Signed-off-by: Ian Bridges <icb@fastmail.org>
Link: https://patch.msgid.link/20260729144617.1388646-4-icb@fastmail.org
Reviewed-by: Nigel Kirkland <nigel.kirkland@broadcom.com>
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
lpfc_vport_symbolic_node_name()
In preparation for removing the strlcat() API[1], replace its uses in
lpfc_vport_symbolic_node_name().
The function builds five unconditional fragments, so one scnprintf()
call composes the whole string. The intermediate tmp buffer and the per
fragment overflow checks become unnecessary. scnprintf() truncates at
the buffer size and returns the number of bytes it wrote, which equals
the length that the removed strnlen() call computed.
The old code capped every fragment at MAXHOSTNAMELEN bytes before
appending it, independently of the room left in the destination. The
replacement formats each fragment directly into the destination, so a
fragment longer than MAXHOSTNAMELEN is no longer truncated when the
destination has room for it.
Link: https://github.com/KSPP/linux/issues/370 [1]
Signed-off-by: Ian Bridges <icb@fastmail.org>
Link: https://patch.msgid.link/20260729144617.1388646-3-icb@fastmail.org
Reviewed-by: Nigel Kirkland <nigel.kirkland@broadcom.com>
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
In preparation for removing the strlcat() API[1], replace its uses in
lpfc_info().
The function accumulates a variable number of optional fragments, which
is what seq_buf is for. The intermediate tmp buffer and the per fragment
overflow checks become unnecessary. seq_buf is memory safe by
construction and silently truncates in the same way as the replaced
pattern.
The old code passed phba->ModelDesc as the format string of the first
scnprintf() call. The model description comes from adapter VPD data.
seq_buf_printf() takes a format string, so the replacement prints it
through "%s". A model description containing conversion specifiers is no
longer interpreted.
Link: https://github.com/KSPP/linux/issues/370 [1]
Signed-off-by: Ian Bridges <icb@fastmail.org>
Link: https://patch.msgid.link/20260729144617.1388646-2-icb@fastmail.org
Reviewed-by: Nigel Kirkland <nigel.kirkland@broadcom.com>
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
|
|
The memory allocated for mboxq using mempool_alloc() is not freed in
some of the early exit error paths. Fix that by moving the
mempool_free() call to an earlier point after last use.
Fixes: d79c9e9d4b3d ("scsi: lpfc: Support dynamic unbounded SGL lists on G7 hardware.")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260707065304.949135-1-nihaal@cse.iitm.ac.in
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Comment-only changes across the lpfc driver, found by running
scripts/checkpatch.pl with the kernel's scripts/spelling.txt list
against drivers/scsi/lpfc/. No functional impact.
v1 covered a single site in lpfc_bsg.c. v2 expands to all
checkpatch-detected comment misspellings across the driver, per review
feedback from Justin Tee on the v1 thread. Identifiers that happen to
match common-typo entries (e.g. LSEXP_CANT_GIVE_DATA,
LPFC_FC_LA_TOP_UNKOWN) are intentionally left untouched, as renaming
them would change the driver's internal API.
Signed-off-by: William Theesfeld <william@theesfeld.net>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260602111912.23864-1-william@theesfeld.net
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The q_pgs pointer was assigned to point at the trailing memory allocated
past the struct. Convert it to a proper C99 flexible array member and
use struct_size() for the allocation.
Assisted-by: Claude:Opus-4.7
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260523050241.190239-1-rosenp@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 15.0.0.0
This patch set adds support for the G8 ASIC found on the LPe42100
series adapter models.
Updates are made to irq affinity assignment, mailbox command handling
related to initialization, SGL construction, firmware download
diagnostics, and the removal of an outdated performance feature. We
also add 128G link speed selection and support.
The patches were cut against Martin's 7.1/scsi-queue tree.
Link: https://patch.msgid.link/20260331205928.119833-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update lpfc version to 15.0.0.0
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-11-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update supported pci_device_id table to include the values for the G8 ASIC
Device ID utilized by LPe42100 series of adapters. The default reporting
string will be "LPe42100".
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-10-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
128G link speed selection and support is added for various mailbox
commands, defines, and ACQE handling. The default behavior to
autonegotiate supported link speed remains the same.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When WRITE_OBJECT mailbox command fails during firmware update, the
lpfc_log_write_firmware_error() routine is used to log and parse commonly
found error codes. Update this routine to also include ASIC_ID register
checks for notifying users of incompatible images.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The construction of SGLs is updated to safeguard ASIC boundary requirements
when using XPSGL.
The LSP type SGE is used to notify where a continuing SGL resides.
Typically, this means that the LSP is the last SGE in an SGL because the
current SGL has reached its maximum size and the LSP is used to refer to
the next follow up SGL. Due to ASIC boundary requirements, there is a need
to ensure a 4 KB boundary is not crossed. Thus, for a maximum size of 256
byte SGLs or 16 SGEs, this means restricting the LSP to being the 12th SGE
for the very first SGL that is used for pre-registration. If additional
SGEs are needed, the LSP will be the last SGE position within that follow
up SGL as was previously implemented.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The PBDE feature is no longer supported and its related fields are removed
in this patch. There are no expected side effects with regards to existing
functionality.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If lpfc_issue_reg_vfi() returns an error in lpfc_rcv_plogi(), then
execution of lpfc_rcv_plogi() continues and lpfc_reg_rpi() is called, which
allocates an mbuf. When this REG_RPI mailbox is issued, it inevitably
fails because the VFI is not registered. However, the REG_RPI failure does
not free the mbuf that was allocated in lpfc_reg_rpi() because there is no
check for mbox error status in lpfc_defer_plogi_acc().
Fix by adding a check in lpfc_rcv_plogi() if lpfc_reg_vfi() fails, then
exit early. Also, add mailbox status check in lpfc_defer_plogi_acc to
enter the REG_RPI mbox_cmpl functions and free the allocated mbuf.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update log message to display the entirety of an MCQE for which there is no
submission context. This log message is not expected to occur and hence is
tagged as a LOG_TRACE_EVENT. As such, move the hbalock release to before
this log message so that the trace event process does not hold the hbalock
for too long.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When specifying rq version, it is preferred to refer to SLI4 interface type
instead of the get_sli4_parameters mailbox command response. If SLI4
if_type is 2 or above, then the newer version 1 is used for rq_create
mailbox commands. Otherwise, version 0 is used and is meant for older
adapters.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The purpose of the lpfc_next_online_cpu() call is to save the CPU index for
the next iteration of the for (index = 0; index < vectors; index++) loop.
Because we’ve reached the last iteration of the loop, cpumask_next(cpu,
aff_mask) returns nr_cpu_ids. Thus, if we already know we've reached the
last iteration of the IRQ affinity assignment loop, then we can just break
and exit.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260331205928.119833-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in fixes to resolve mpi3mr merge conflict.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The function lpfc_freenode() was renamed to lpfc_cleanup_node() by
commit 685f0bf7afe0 ("[SCSI] lpfc 8.1.12 : Collapse discovery lists to a
single node list"), and commit a70e63eee1c1 ("scsi: lpfc: Fix NPIV
Fabric Node reference counting") later removed the lpfc_unreg_rpi() call
from lpfc_cleanup_node().
Remove the now-inaccurate "called from lpfc_freenode()" sentence and
reflow the remaining comment text for lpfc_unreg_rpi().
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260321105909.7804-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
lpfc_cgn_calc_crc32(data, size, crc) is really just an open-coded version
of ~crc32c(bitrev32(crc), data, size). However, all callers pass crc ==
~0, so it can be simplified even further to just ~crc32c(~0, data, size).
Remove the crc argument and implement it that way.
While we're at it, also use proper types in the function prototype.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260316223631.72361-1-ebiggers@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Avoid all kernel-doc warnings in lpfc.h:
- Use the correct function parameter name
- Add a '*' to a kernel-doc line
- Repair the function Returns: comments
Fixes these warnings:
Warning: drivers/scsi/lpfc/lpfc.h:1674 No description found for return
value of 'lpfc_next_online_cpu'
Warning: drivers/scsi/lpfc/lpfc.h:1686 No description found for return
value of 'lpfc_next_present_cpu'
Warning: drivers/scsi/lpfc/lpfc.h:1700 function parameter 'eq' not
described in 'lpfc_sli4_mod_hba_eq_delay'
Warning: drivers/scsi/lpfc/lpfc.h:1755 bad line: --------------------------
Warning: drivers/scsi/lpfc/lpfc.h:1759 No description found for return
value of 'lpfc_is_vmid_enabled'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260224234954.3606638-1-rdunlap@infradead.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update lpfc version to 14.4.0.14.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-14-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update copyright string to 2026 for this version patch set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-13-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
First burst is only supported on adapters running in SLI4 mode and that
are non-FCoE based. Include sli_rev and FCoE mode checks before setting
the write transfer ready disabled bit in PRLIs.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-12-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
WQE submissions only require a 3 bit field when specifying the class of
service to use. So, update WQE submission paths to use a 3 bit field
instead of 0x0f as the bit mask. A NLP_FCP_CLASS_MASK bitmask is
defined to ensure only a 3 bit mask is used.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-11-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When handling a PCI function reset, notification to the NVMe transport
layer is skipped for outstanding aborted NVMe I/O. Introduce a new
routine called lpfc_nvme_flush_abts_list(), which notifies upper NVMe
transport layer of outstanding aborted NVMe I/O that are not planned to
be completed normally due to a PCI function reset request.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-10-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a port is offline in lpfc_sli_abort_ring, the phba->txcmplq is
cleared but the phba->txcmplq_cnt is not reset to zero. This can
sometimes result in a phba->txcmplq_cnt that never reaches zero, which
hangs the cleanup process.
Update lpfc_sli_abort_ring so that txcmplq_cnt is reset to zero and also
ensure that the LPFC_IO_ON_TXCMPLQ flag is properly cleared.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Error labels in lpfc_fdmi_cmd() accidentally return success status and
can potentially leak memory. Change error exit path status to return a
non-zero value using a common exit path for failure cases. The error
path also frees allocated memory and provides logging.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When NLP_IN_RECOV_POST_DEV_LOSS is set, the initial node reference
remains held while recovery is in progress. Taking a reference when
NLP_IN_RECOV_POST_DEV_LOSS is cleared results in an additional reference
being held. This causes an extra reference when cleaning up lpfc_vport
instances. Thus, remove the extraneous ndlp kref get in
lpfc_check_nlp_post_devloss.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For all FLOGI completions, the vport->phba->pport pointer is actually a
pointer to the original vport pointer because FLOGIs always complete on
the physical lpfc_vport object. Thus, we can reduce the
vport->phba->pport->vmid_flag dereference to simply vport->vmid_flag.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The member called cfg_sg_dma_buf_size is declared as a u32, while the
min comparator's second argument called SLI4_PAGE_SIZE is a #define.
Proper comparison should be using the same type, therefore change to use
min_t.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Should fabric login or related initialization mailbox commands fail,
there are no log messages to notify which step encountered an issue.
Update error label paths to log when unexpected fabric login issues
occur.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
An RCQE with statuses indicating that an RQE is dropped or when there
are insufficient buffers to receive new RQEs are currently occuring
silently. Add a new log message to warn when such events occur.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If kref_get_unless_zero on ndlp->kref is unsuccessful, then there's no
point to log kref_read(&ndlp->kref) because it will of course be zero.
In such cases, ndlp->vport would also be an invalid pointer. Thus, use
pr_info() instead of lpfc_printf_vlog() to log when a kref get is
attempted on an ndlp with a zero kref.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in remaining fixes from 7.0/scsi-queue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Using set_memory_wc() to enable write-combining for the DPP portion of
the MMIO mapping is wrong as set_memory_*() is meant to operate on RAM
only, not MMIO mappings. In fact, as used currently triggers a BUG_ON()
with enabled CONFIG_DEBUG_VIRTUAL.
Simply map the DPP region separately and in addition to the already
existing mappings, avoiding any possible negative side effects for
these.
Fixes: 1351e69fc6db ("scsi: lpfc: Add push-to-adapter support to sli4")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Link: https://patch.msgid.link/20260212192327.141104-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning
option has been introduced. This warning is enabled by default and can
be used to catch .queuecommand() implementations that return another
value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch
that changes the return type of the .queuecommand() implementations from
'int' into 'enum scsi_qc_status'. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.13
This patch set introduces reporting encryption information for Fibre
Channel HBAs.
First, the scsi_transport_fc layer is updated to include a new
fc_encryption_info attribute that is added to struct fc_rport.
Supporting sysfs and LLDD templates are provided.
Then, the lpfc driver is updated to utilize the new templates for
reporting encrypted fibre channel connections to upper layer.
The patches were cut against Martin's 6.19/scsi-queue tree.
Link: https://patch.msgid.link/20251211001659.138635-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update lpfc version to 14.4.0.13
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251211001659.138635-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Support logging encryption events in both point-to-point and fabric
topologies. A new LOG_ENCRYPTION flag is defined for reporting
encryption related events for HBAs that support the FEDIF feature.
Encryption information is stored in each NDLP object, which is
determined during the discovery stage after PLOGI completes.
For reporting encryption information to upper layers, the
.get_fc_rport_enc_info routine is implemented in lpfc_get_enc_info().
This allows encryption status to be reported through fc_remote_ports
sysfs. Debugfs is also updated to report encryption information for all
NDLP objects.
Signed-off-by: Sarah Catania <sarah.catania@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251211001659.138635-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The function opencodes for_each_set_bit_wrap(). Use it, and while there
switch from goto-driven codeflow to more high-level constructions.
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251205235808.358258-1-yury.norov@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, target, qla2xxx) plus assorted
cleanups and fixes including the WQ_PERCPU series.
The biggest core change is the new allocation of pseudo-devices which
allow the sending of internal commands to a given SCSI target"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (147 commits)
scsi: MAINTAINERS: Add the UFS include directory
scsi: scsi_debug: Support injecting unaligned write errors
scsi: qla2xxx: Fix improper freeing of purex item
scsi: ufs: rockchip: Fix compile error without CONFIG_GPIOLIB
scsi: ufs: rockchip: Reset controller on PRE_CHANGE of hce enable notify
scsi: ufs: core: Use scsi_device_busy()
scsi: ufs: core: Fix single doorbell mode support
scsi: pm80xx: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedi: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: ibmvscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedf: Add WQ_PERCPU to alloc_workqueue() users
scsi: bnx2fc: Add WQ_PERCPU to alloc_workqueue() users
scsi: be2iscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: message: fusion: Add WQ_PERCPU to alloc_workqueue() users
scsi: lpfc: WQ_PERCPU added to alloc_workqueue() users
scsi: scsi_transport_fc: WQ_PERCPU added to alloc_workqueue users()
scsi: scsi_dh_alua: WQ_PERCPU added to alloc_workqueue() users
scsi: qla2xxx: WQ_PERCPU added to alloc_workqueue() users
scsi: target: sbp: Replace use of system_unbound_wq with system_dfl_wq
...
|
