| Age | Commit message (Collapse) | Author |
|---|
|
Pull ceph updates from Ilya Dryomov:
"A wide variety of mostly CephFS fixes and cleanups, split between
changes that address edge cases (Sam, Xiubo, Matthew), efficiency
improvements (Max) and AI-assisted hardening (Michael, Jeremy).
One thing that stands out is Alex's change to how CephFS behaves in
NEARFULL scenarios: the long-standing "make all writes synchronous"
behavior has become opt-in. It was always somewhat controversial and
doesn't make much sense for modern deployments; the new default is to
continue normal operation (i.e. buffer writes as MDS allows, etc). The
behavior in case the cluster reaches any FULL state remains the same
as before"
* tag 'ceph-for-7.3-rc1' of https://github.com/ceph/ceph-client: (32 commits)
ceph: force a cap message when a deferred revoke can't be acked immediately
libceph: reject buckets with mismatched CRUSH ids
ceph: reject export_targets ranks >= CEPH_MAX_MDS in mdsmap decode
ceph: fix leaked inode reference on writeback abort at umount
libceph: remove ceph_put_page_vector()
libceph: validate banner payload length
ceph: make nearfull sync writes opt-in
ceph: do not repeat ceph_trim_dentries() if no progress possible
ceph: drop mdsc->mutex before decoding the MDS reply
ceph: fix UAF in check_new_map() on session freed during unlock
ceph: fix UAF in __kick_flushing_caps() on cf entry freed during unlock
ceph: pass inode pointer around instead of reloading it
ceph: mark cap remove with RB_CLEAR_NODE() instead of setting ci=NULL
ceph: add helper function ceph_cap_is_removed()
ceph: make __ceph_remove_cap() static
ceph: cap delegated inode count in ceph_parse_deleg_inos()
ceph: bound num_export_targets array for mds info v2/v3
ceph: bound MDSCapAuth path and fs_name decode in handle_session()
ceph: bound xattr value length in __build_xattrs()
ceph: bound copied dentry name length in NFS export get_name
...
|
|
ceph_cap_reclaim_work() re-queues itself for as long as
ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease
walk exhausts its `nr_to_scan` budget. This creates a busy loop that
consumes CPU without making any progress when there is nothing to
reclaim: with no cap pressure (`count==0`) and every scanned lease
still valid, each pass runs the full scan budget down to zero and
returns `-EAGAIN`, only to be queued again immediately.
The dir-lease walk made this worse. When `expire_dir_lease` is
`false` (i.e. we have no intention of reclaiming dir leases),
__dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH`
moves the dentry to the tail of the list and resets `di->time` via
__dentry_dir_lease_touch(), so a walk over N valid leases pointlessly
rewrote the list, refreshed the timestamps (preventing them from ever
aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN`
requeue.
Fix this in three steps:
- Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is
`false`. If we are not going to reclaim the lease, leave it in
place instead of churning the list and resetting its timestamp; the
walk then terminates naturally (or via `STOP` at the first fresh
lease).
- Only return `-EAGAIN` from the first (dentry-lease) walk when something
was actually freed. A full batch that frees nothing means retrying
the same list immediately is futile; fall through to the dir-lease
walk instead.
- After both walks, bail out with success (0) when nothing was freed
and there is no cap pressure (`count==0`). There is no reason to
keep retrying when we are not over the cap limit and made no
progress.
Under real cap pressure (`count>0`) the reclaim path is unchanged and
still retries via `-EAGAIN`.
Without this patch, I saw 500 ceph_trim_dentries() calls per second on
our web servers. This is very visible in `/proc/lock_stat` (5 minute
capture):
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00
-----------------------
&mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
&mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
-----------------------
&mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
&mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
With this patch:
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27
-----------------------
&mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 169 [<000000002038c577>] __dentry_lease_unlist+0x50/0xa0
&mdsc->dentry_list_lock 16 [<00000000c991106d>] __ceph_dentry_lease_touch+0x5c/0xa8
&mdsc->dentry_list_lock 1 [<00000000612fe15f>] __dentry_leases_walk+0x64/0x2c8
-----------------------
&mdsc->dentry_list_lock 158 [<000000002038c577>] __dentry_lease_unlist+0x50/0xa0
&mdsc->dentry_list_lock 858 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 182 [<00000000612fe15f>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 17 [<00000000c991106d>] __ceph_dentry_lease_touch+0x5c/0xa8
__dentry_leases_walk() is almost gone. The total wait time is reduced
by a factor of 483. That will give some latency gains to
ceph_readdir().
Cc: stable@vger.kernel.org
Fixes: 37c4efc1ddf9 ("ceph: periodically trim stale dentries")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When a LOOKUP/LOOKUPSNAP in a snapped directory returns ENOENT
without a trace, ceph_finish_lookup() creates a negative dentry
via d_add(dentry, NULL). For live directories this is fine — the
dentry naturally expires. But for snapped directories,
ceph_d_revalidate() unconditionally trusts all cached dentries
(valid = 1), so a negative dentry created by a transient error
persists forever, hiding entries that genuinely exist in the
snapshot.
Only cache negative dentries for live (non-snapshotted) parent
directories. For snapped parents, skip the negative dentry so
that VFS retries the lookup on the next access. Since the
conditions that trigger a negative dentry (MDS transient error,
local ENOENT shortcut, or MDS null dentry lease) are all rare in
snapped directories, the performance impact of this change is
negligible.
Link: https://tracker.ceph.com/issues/78529
Reported-by: Andras Pataki <apataki@flatironinstitute.org>
Signed-off-by: Xiubo Li <xiubo.li@clyso.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When mkdir succeeds, ceph_mkdir() sets ret to ERR_PTR(0) which is
incorrect. It should return NULL instead for success.
Fixes: 88d5baf69082 ("Change inode_operations.mkdir to return struct dentry *")
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Bigger cleanups:
- The lockref dead-count handling is tidied up.
The open-coded check for a count below zero as the dead marker
relies on information the caller should not have.
- make put_mnt_ns() leave mounts connected. Destroying a mount
namespace disconnected its mounts from their mount points. So a
file descriptor still open on the parent of a mount point could be
used to peek under it.
Locked mounts were already kept connected to prevent exactly that.
But a mount is only locked when its tree is copied across a user
namespace boundary. So a mount namespace set up by a privileged
component had no locked mounts and its mounts were disconnected.
Passing UMOUNT_CONNECTED keeps every mount connected and prevents
that bug.
- vfs_prepare_mode() passes S_IFDIR for directories. I meant to fix
that ago but didn't get to it. So now someone finally did it.
This kills the exception where the mode could be 0 when a directory
was created whereas every other creation operation passed it
explicitly already.
- move long delayed work for ufs, jffs2, hfsplus, hfs and affs from
the per-cpu system_long_wq to the new unbound system_dfl_long_wq.
None of that work relies on per-cpu state and the work item is
enqueued with queue_delayed_work() whose timer is global anyway. So
it may as well benefit from scheduler task placement.
Smaller fixes and cleanups:
- unlock_buffer() and journal_end_buffer_io_sync() use
clear_and_wake_up_bit()
- the pipe page pools are unified into a single per-pipe pool and the
extra wake_up(rd_wait) is limited to EPOLLET consumers
- eventpoll now computes its timer slack lazily in ep_poll()
- shrink_dcache_for_umount() keeps making progress on busy roots
- excess xarray nodes are freed in clear_inode()
- romfs detects hard link cycles
- the user path of nested backing files is fixed
- pidfd holds exec_update_lock around the namespace ioctl
- non-memcg-aware nr_cached_objects is skipped during memcg slab
shrink
- iomap_write_iter() always returns status
- mangle_path() is renamed to seq_mangle_path()
- inode timestamp accessors are annotated
- new regression test for pipe->poll_usage.
- a few documentation, kernel-doc and selftest fixes"
* tag 'vfs-7.3-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (67 commits)
selftests/namespaces: Fix racy pipe handshake in timens and pidns_separate
selftests/epoll: add a regression test for pipe->poll_usage
pipe: only enable the extra wake_up(rd_wait) for EPOLLET consumers
pidfd: hold exec_update_lock around namespace ioctl
fs: fix user path of nested backing files
fs: remove stale inode_insert5() kernel-doc parameter
fs: fix switch/case indentation in sysfs() syscall
fs: document semantics of kstat::{uid,gid} fields
dcache: keep shrink_dcache_for_umount() making progress on busy roots
seq_file: rename mangle_path to seq_mangle_path
nstree: add/fix struct ns_id_req kernel-doc member fields
dcache: use lockref routines for dead count checks
lockref: tidy up dead count handling
initramfs: fix typo in reserve_initrd_mem comment
fs/pipe: unify the page pools into a single per-pipe pool
fs: annotate inode timestamp accessors
eventpoll: compute timer slack lazily in ep_poll()
selftests/filesystems: add mntns cleanup test
put_mnt_ns(): leave mounts connected
affs: Move long delayed work on system_dfl_long_wq
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs lookup updates from Christian Brauner:
"This refactors lookup_open() and adds vfs_lookup_open() for nfsd.
mnt_want_write() and parent locking are moved into lookup_open()
itself.
audit_inode_child() is also now called in lookup_open() on failure.
That is the calling convention in vfs_create() and vfs_mkdir(), but
lookup_open() made no such call when atomic_open() should have created
a file and did not. And neither did the regular ->create() path fwiw.
This also contains work to remove the unneeded excl argument from the
->create() inode op"
* tag 'vfs-7.3-rc1.lookup' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/namei.c: fix coding style in atomic_open() and lookup_open()
fs/namei.c: fix kerneldoc of atomic_open() and vfs_lookup_open()
fs/namei.c: update stale comments in lookup_open()
Remove excl arg to ->create inode_operation
fs/namei.c: update kerneldoc of atomic_open()
vfs: call audit_inode_child() in lookup_open() on failure
vfs: move create error && negative dentry case in lookup_open() up
VFS: add vfs_lookup_open() for nfsd
VFS: move delegated_inode retry loop into lookup_open()
VFS: move mnt_want_write() and locking into lookup_open()
|
|
The only time that 'false' is passed as the 'excl' arg to the ->create
inode_operation is in lookup_open() when ->atomic_open is not provided
by the parent directory.
*all* directory inode_operations which do not have ->atomic_open
completely ignore the 'excl' arg.
Therefore we don't need the 'excl' arg. Those few ->create operations
which pay attention to the arg are only ever called with a value of
'true'.
We remove that arg and change all ->create operations to behave as those
thhe arg were 'true'.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/178290671516.27465.15984496764174914338@noble.neil.brown.name
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
1. put the dead val into a macro so that it can be used in other places
2. __lockref_is_dead():
- drop the __ suffix, this is not an internal routine
- drop the spurious cast, the value is already a signed int
- use READ_ONCE to prevent any compile shenanigans
3. provide lockref_is_dead_or_zero()
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20260724171422.429284-2-mjguzik@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
The ceph_readdir() function allocates a ceph_mds_request via
ceph_mdsc_create_request() and stores it in dfi->last_readdir. In
the directory entry processing loop, if the entry's offset is less
than ctx->pos or if the inode pointer is unexpectedly NULL, the
function returns -EIO without releasing the reference held by
dfi->last_readdir, causing a refcount leak.
Fix this by adding ceph_mdsc_put_request(dfi->last_readdir) before
returning on these error paths. Also set dfi->last_readdir to NULL
for safety, matching the cleanup done at the normal exit.
Cc: stable@vger.kernel.org
Fixes: af9ffa6df7e3 ("ceph: add support to readdir for encrypted names")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
vfs_mkdir() now sets the S_IFDIR type bit in the mode it passes to
->mkdir(), so OR-ing S_IFDIR into the mode again in ceph_mkdir() is
redundant. Drop it.
Assisted-by: LLM
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260630105400.68459-8-jkoolstra@xs4all.nl
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Ceph can call d_add(dentry, NULL) on a negative dentry that is already
present in the primary dcache hash.
In the current VFS that is not safe. d_add() goes through __d_add()
to __d_rehash(), which unconditionally reinserts dentry->d_hash into
the hlist_bl bucket. If the dentry is already hashed, reinserting the
same node can corrupt the bucket, including creating a self-loop.
Once that happens, __d_lookup() can spin forever in the hlist_bl walk,
typically looping only on the d_name.hash mismatch check and
eventually triggering RCU stall reports like this one:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 87-....: (2100 ticks this GP) idle=3a4c/1/0x4000000000000000 softirq=25003319/25003319 fqs=829
rcu: (t=2101 jiffies g=79058445 q=698988 ncpus=192)
CPU: 87 UID: 2952868916 PID: 3933303 Comm: php-cgi8.3 Not tainted 6.18.17-i1-amd #950 NONE
Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.6 09/22/2023
RIP: 0010:__d_lookup+0x46/0xb0
Code: c1 e8 07 48 8d 04 c2 48 8b 00 49 89 fc 49 89 f5 48 89 c3 48 83 e3 fe 48 83 f8 01 77 0f eb 2d 0f 1f 44 00 00 48 8b 1b 48 85 db <74> 20 39 6b 18 75 f3 48 8d 7b 78 e8 ba 85 d0 00 4c 39 63 10 74 1f
RSP: 0018:ff745a70c8253898 EFLAGS: 00000282
RAX: ff26e470054cb208 RBX: ff26e470054cb208 RCX: 000000006e958966
RDX: ff26e48267340000 RSI: ff745a70c82539b0 RDI: ff26e458f74655c0
RBP: 000000006e958966 R08: 0000000000000180 R09: 9cd08d909b919a89
R10: ff26e458f74655c0 R11: 0000000000000000 R12: ff26e458f74655c0
R13: ff745a70c82539b0 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f
FS: 00007f5770896980(0000) GS:ff26e482c5d88000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5764de50c0 CR3: 000000a72abb5001 CR4: 0000000000771ef0
PKRU: 55555554
Call Trace:
<TASK>
lookup_fast+0x9f/0x100
walk_component+0x1f/0x150
link_path_walk+0x20e/0x3d0
path_lookupat+0x68/0x180
filename_lookup+0xdc/0x1e0
vfs_statx+0x6c/0x140
vfs_fstatat+0x67/0xa0
__do_sys_newfstatat+0x24/0x60
do_syscall_64+0x6a/0x230
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is reachable with reused cached negative dentries. A Ceph lookup
or atomic_open can be handed a negative dentry that is already hashed,
and fs/ceph/dir.c then hits one of two paths that incorrectly assume
"negative" also means "unhashed":
- ceph_finish_lookup():
MDS reply is -ENOENT with no trace
-> d_add(dentry, NULL)
- ceph_lookup():
local ENOENT fast path for a complete directory with shared caps
-> d_add(dentry, NULL)
Both paths can therefore re-add an already-hashed negative dentry.
Ceph already uses the correct pattern elsewhere: ceph_fill_trace() only
calls d_add(dn, NULL) for a negative null-dentry reply when d_unhashed(dn)
is true.
Fix both fs/ceph/dir.c sites the same way: only call d_add() for a
negative dentry when it is actually unhashed. If the negative dentry
is already hashed, leave it in place and reuse it as-is.
This preserves the existing behavior for unhashed dentries while
avoiding d_hash list corruption for reused hashed negatives.
Cc: stable@vger.kernel.org
Fixes: 2817b000b02c ("ceph: directory operations")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
ceph_mdsc_build_path() must be called with a zero-initialized
ceph_path_info parameter, or else the following
ceph_mdsc_free_path_info() may crash.
Example crash (on Linux 6.18.12):
virt_to_cache: Object is not a Slab page!
WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6732 kmem_cache_free+0x316/0x400
[...]
Call Trace:
[...]
ceph_open+0x13d/0x3e0
do_dentry_open+0x134/0x480
vfs_open+0x2a/0xe0
path_openat+0x9a3/0x1160
[...]
cache_from_obj: Wrong slab cache. names_cache but object is from ceph_inode_info
WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6746 kmem_cache_free+0x2dd/0x400
[...]
kernel BUG at mm/slub.c:634!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
RIP: 0010:__slab_free+0x1a4/0x350
Some of the ceph_mdsc_build_path() callers had initializers, but
others had not, even though they were all added by commit 15f519e9f883
("ceph: fix race condition validating r_parent before applying state").
The ones without initializer are suspectible to random crashes. (I can
imagine it could even be possible to exploit this bug to elevate
privileges.)
Unfortunately, these Ceph functions are undocumented and its semantics
can only be derived from the code. I see that ceph_mdsc_build_path()
initializes the structure only on success, but not on error.
Calling ceph_mdsc_free_path_info() after a failed
ceph_mdsc_build_path() call does not even make sense, but that's what
all callers do, and for it to be safe, the structure must be
zero-initialized. The least intrusive approach to fix this is
therefore to add initializers everywhere.
Cc: stable@vger.kernel.org
Fixes: 15f519e9f883 ("ceph: fix race condition validating r_parent before applying state")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
During async unlink, we drop the `i_nlink` counter before we receive
the completion (that will eventually update the `i_nlink`) because "we
assume that the unlink will succeed". That is not a bad idea, but it
races against deletions by other clients (or against the completion of
our own unlink) and can lead to an underrun which emits a WARNING like
this one:
WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68
Modules linked in:
CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655
Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drop_nlink+0x50/0x68
lr : ceph_unlink+0x6c4/0x720
sp : ffff80012173bc90
x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680
x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647
x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203
x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365
x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec
x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74
x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94
x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002
x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8
Call trace:
drop_nlink+0x50/0x68 (P)
vfs_unlink+0xb0/0x2e8
do_unlinkat+0x204/0x288
__arm64_sys_unlinkat+0x3c/0x80
invoke_syscall.constprop.0+0x54/0xe8
do_el0_svc+0xa4/0xc8
el0_svc+0x18/0x58
el0t_64_sync_handler+0x104/0x130
el0t_64_sync+0x154/0x158
In ceph_unlink(), a call to ceph_mdsc_submit_request() submits the
CEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion.
Meanwhile, between this call and the following drop_nlink() call, a
worker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT or
just a CEPH_MSG_CLIENT_REPLY (the latter of which could be our own
completion). These will lead to a set_nlink() call, updating the
`i_nlink` counter to the value received from the MDS. If that new
`i_nlink` value happens to be zero, it is illegal to decrement it
further. But that is exactly what ceph_unlink() will do then.
The WARNING can be reproduced this way:
1. Force async unlink; only the async code path is affected. Having
no real clue about Ceph internals, I was unable to find out why the
MDS wouldn't give me the "Fxr" capabilities, so I patched
get_caps_for_async_unlink() to always succeed.
(Note that the WARNING dump above was found on an unpatched kernel,
without this kludge - this is not a theoretical bug.)
2. Add a sleep call after ceph_mdsc_submit_request() so the unlink
completion gets handled by a worker thread before drop_nlink() is
called. This guarantees that the `i_nlink` is already zero before
drop_nlink() runs.
The solution is to skip the counter decrement when it is already zero,
but doing so without a lock is still racy (TOCTOU). Since
ceph_fill_inode() and handle_cap_grant() both hold the
`ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, this
seems like the proper lock to protect the `i_nlink` updates.
I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using
`afs_vnode.cb_lock`). All three have the zero check as well.
Cc: stable@vger.kernel.org
Fixes: 2ccb45462aea ("ceph: perform asynchronous unlink if we have sufficient caps")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Setting ->setlease() to a NULL pointer now has the same effect as
setting it to simple_nosetlease(). Remove all of the setlease
file_operations that are set to simple_nosetlease, and the function
itself.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260108-setlease-6-20-v1-24-ea4dec9b67fa@kernel.org
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
With the advent of directory leases, it's necessary to set the
->setlease() handler in directory file_operations to properly deny them.
Fixes: e6d28ebc17eb ("filelock: push the S_ISREG check down to ->setlease handlers")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260107-setlease-6-19-v1-5-85f034abcc57@kernel.org
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
|
|
Remove the ceph_base64_encode() and ceph_base64_decode() functions and
replace their usage with the generic base64_encode() and base64_decode()
helpers from lib/base64.
This eliminates the custom implementation in Ceph, reduces code
duplication, and relies on the shared Base64 code in lib. The helpers
preserve RFC 3501-compliant Base64 encoding without padding, so there are
no functional changes.
This change also improves performance: encoding is about 2.7x faster and
decoding achieves 43-52x speedups compared to the previous local
implementation.
Link: https://lkml.kernel.org/r/20251114060240.89965-1-409411716@gms.tku.edu.tw
Signed-off-by: Guan-Chun Wu <409411716@gms.tku.edu.tw>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: "Theodore Y. Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Yu-Sheng Huang <home7438072@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The wake_up_bit() is called in ceph_async_unlink_cb(),
wake_async_create_waiters(), and ceph_finish_async_create().
It makes sense to switch on clear_bit() function, because
it makes the code much cleaner and easier to understand.
More important rework is the adding of smp_mb__after_atomic()
memory barrier after the bit modification and before
wake_up_bit() call. It can prevent potential race condition
of accessing the modified bit in other threads. Luckily,
clear_and_wake_up_bit() already implements the required
functionality pattern:
static inline void clear_and_wake_up_bit(int bit, unsigned long *word)
{
clear_bit_unlock(bit, word);
/* See wake_up_bit() for which memory barrier you need to use. */
smp_mb__after_atomic();
wake_up_bit(word, bit);
}
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add validation to ensure the cached parent directory inode matches the
directory info in MDS replies. This prevents client-side race conditions
where concurrent operations (e.g. rename) cause r_parent to become stale
between request initiation and reply processing, which could lead to
applying state changes to incorrect directory inodes.
[ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to
move CEPH_CAP_PIN reference when r_parent is updated:
When the parent directory lock is not held, req->r_parent can become
stale and is updated to point to the correct inode. However, the
associated CEPH_CAP_PIN reference was not being adjusted. The
CEPH_CAP_PIN is a reference on an inode that is tracked for
accounting purposes. Moving this pin is important to keep the
accounting balanced. When the pin was not moved from the old parent
to the new one, it created two problems: The reference on the old,
stale parent was never released, causing a reference leak.
A reference for the new parent was never acquired, creating the risk
of a reference underflow later in ceph_mdsc_release_request(). This
patch corrects the logic by releasing the pin from the old parent and
acquiring it for the new parent when r_parent is switched. This
ensures reference accounting stays balanced. ]
Cc: stable@vger.kernel.org
Signed-off-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Lift copying the name into callers of ceph_encode_encrypted_dname()
that do not have it already copied; ceph_encode_encrypted_fname()
disappears.
That fixes a UAF in ceph_mdsc_build_path() - while the initial copy
of plaintext into buf is done under ->d_lock, we access the
original name again in ceph_encode_encrypted_fname() and that is
done without any locking. With ceph_encode_encrypted_dname() using
the stable copy the problem goes away.
Tested-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs ceph updates from Christian Brauner:
"This contains the work to remove access to page->index from ceph
and fixes the test failure observed for ceph with generic/421 by
refactoring ceph_writepages_start()"
* tag 'vfs-6.15-rc1.ceph' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fscrypt: Change fscrypt_encrypt_pagecache_blocks() to take a folio
ceph: Fix error handling in fill_readdir_cache()
fs: Remove page_mkwrite_check_truncate()
ceph: Pass a folio to ceph_allocate_page_array()
ceph: Convert ceph_move_dirty_page_in_page_array() to move_dirty_folio_in_page_array()
ceph: Remove uses of page from ceph_process_folio_batch()
ceph: Convert ceph_check_page_before_write() to use a folio
ceph: Convert writepage_nounlock() to write_folio_nounlock()
ceph: Convert ceph_readdir_cache_control to store a folio
ceph: Convert ceph_find_incompatible() to take a folio
ceph: Use a folio in ceph_page_mkwrite()
ceph: Remove ceph_writepage()
ceph: fix generic/421 test failure
ceph: introduce ceph_submit_write() method
ceph: introduce ceph_process_folio_batch() method
ceph: extend ceph_writeback_ctl for ceph_writepages_start() refactoring
|
|
Pass a folio around instead of a page. This removes an access to
page->index and a few hidden calls to compound_head().
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250217185119.430193-5-willy@infradead.org
Tested-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ceph already splices the correct dentry (in splice_dentry()) from the
result of mkdir but does nothing more with it.
Now that ->mkdir can return a dentry, return the correct dentry.
Note that previously ceph_mkdir() could call
ceph_init_inode_acls()
on the inode from the wrong dentry, which would be NULL. This
is safe as ceph_init_inode_acls() checks for NULL, but is not
strictly correct. With this patch, the inode for the returned dentry
is passed to ceph_init_inode_acls().
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250227013949.536172-4-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some filesystems, such as NFS, cifs, ceph, and fuse, do not have
complete control of sequencing on the actual filesystem (e.g. on a
different server) and may find that the inode created for a mkdir
request already exists in the icache and dcache by the time the mkdir
request returns. For example, if the filesystem is mounted twice the
directory could be visible on the other mount before it is on the
original mount, and a pair of name_to_handle_at(), open_by_handle_at()
calls could instantiate the directory inode with an IS_ROOT() dentry
before the first mkdir returns.
This means that the dentry passed to ->mkdir() may not be the one that
is associated with the inode after the ->mkdir() completes. Some
callers need to interact with the inode after the ->mkdir completes and
they currently need to perform a lookup in the (rare) case that the
dentry is no longer hashed.
This lookup-after-mkdir requires that the directory remains locked to
avoid races. Planned future patches to lock the dentry rather than the
directory will mean that this lookup cannot be performed atomically with
the mkdir.
To remove this barrier, this patch changes ->mkdir to return the
resulting dentry if it is different from the one passed in.
Possible returns are:
NULL - the directory was created and no other dentry was used
ERR_PTR() - an error occurred
non-NULL - this other dentry was spliced in
This patch only changes file-systems to return "ERR_PTR(err)" instead of
"err" or equivalent transformations. Subsequent patches will make
further changes to some file-systems to return a correct dentry.
Not all filesystems reliably result in a positive hashed dentry:
- NFS, cifs, hostfs will sometimes need to perform a lookup of
the name to get inode information. Races could result in this
returning something different. Note that this lookup is
non-atomic which is what we are trying to avoid. Placing the
lookup in filesystem code means it only happens when the filesystem
has no other option.
- kernfs and tracefs leave the dentry negative and the ->revalidate
operation ensures that lookup will be called to correctly populate
the dentry. This could be fixed but I don't think it is important
to any of the users of vfs_mkdir() which look at the dentry.
The recommendation to use
d_drop();d_splice_alias()
is ugly but fits with current practice. A planned future patch will
change this.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250227013949.536172-2-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently get_fscrypt_altname() requires ->r_dentry->d_name to be stable
and it gets that in almost all cases. The only exception is ->d_revalidate(),
where we have a stable name, but it's passed separately - dentry->d_name
is not stable there.
Propagate it down to get_fscrypt_altname() as a new field of struct
ceph_mds_request - ->r_dname, to be used instead ->r_dentry->d_name
when non-NULL.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
No need to mess with the boilerplate for obtaining what we already
have. Note that ceph is one of the "will want a path from filesystem
root if we want to talk to server" cases, so the name of the last
component is of little use - it is passed to fscrypt_d_revalidate()
and it's used to deal with (also crypt-related) case in request
marshalling, when encrypted name turns out to be too long. The former
is not a problem, but the latter is racy; that part will be handled
in the next commit.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->d_revalidate() often needs to access dentry parent and name; that has
to be done carefully, since the locking environment varies from caller
to caller. We are not guaranteed that dentry in question will not be
moved right under us - not unless the filesystem is such that nothing
on it ever gets renamed.
It can be dealt with, but that results in boilerplate code that isn't
even needed - the callers normally have just found the dentry via dcache
lookup and want to verify that it's in the right place; they already
have the values of ->d_parent and ->d_name stable. There is a couple
of exceptions (overlayfs and, to less extent, ecryptfs), but for the
majority of calls that song and dance is not needed at all.
It's easier to make ecryptfs and overlayfs find and pass those values if
there's a ->d_revalidate() instance to be called, rather than doing that
in the instances.
This commit only changes the calling conventions; making use of supplied
values is left to followups.
NOTE: some instances need more than just the parent - things like CIFS
may need to build an entire path from filesystem root, so they need
more precautions than the usual boilerplate. This series doesn't
do anything to that need - these filesystems have to keep their locking
mechanisms (rename_lock loops, use of dentry_path_raw(), private rwsem
a-la v9fs).
One thing to keep in mind when using name is that name->name will normally
point into the pathname being resolved; the filename in question occupies
name->len bytes starting at name->name, and there is NUL somewhere after it,
but it the next byte might very well be '/' rather than '\0'. Do not
ignore name->len.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Correct spelling here and there as suggested by codespell.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Pull ceph updates from Ilya Dryomov:
"Three CephFS fixes from Xiubo and Luis and a bunch of assorted
cleanups"
* tag 'ceph-for-6.12-rc1' of https://github.com/ceph/ceph-client:
ceph: remove the incorrect Fw reference check when dirtying pages
ceph: Remove empty definition in header file
ceph: Fix typo in the comment
ceph: fix a memory leak on cap_auths in MDS client
ceph: flush all caps releases when syncing the whole filesystem
ceph: rename ceph_flush_cap_releases() to ceph_flush_session_cap_releases()
libceph: use min() to simplify code in ceph_dns_resolve_name()
ceph: Convert to use jiffies macro
ceph: Remove unused declarations
|
|
Correctly spelled comments make it easier for the reader to understand
the code.
replace 'tagert' with 'target' in the comment &
replace 'vaild' with 'valid' in the comment &
replace 'carefull' with 'careful' in the comment &
replace 'trsaverse' with 'traverse' in the comment.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
It's not used for ceph so don't bother with it at all.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-3-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull ceph updates from Ilya Dryomov:
"A small patchset to address bogus I/O errors and ultimately an
assertion failure in the face of watch errors with -o exclusive
mappings in RBD marked for stable and some assorted CephFS fixes"
* tag 'ceph-for-6.11-rc1' of https://github.com/ceph/ceph-client:
rbd: don't assume rbd_is_lock_owner() for exclusive mappings
rbd: don't assume RBD_LOCK_STATE_LOCKED for exclusive mappings
rbd: rename RBD_LOCK_STATE_RELEASING and releasing_wait
ceph: fix incorrect kmalloc size of pagevec mempool
ceph: periodically flush the cap releases
ceph: convert comma to semicolon in __ceph_dentry_dir_lease_touch()
ceph: use cap_wait_list only if debugfs is enabled
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
page_index is needed for mixed usage of page cache and swap cache, for
pure page cache usage, the caller can just use page->index instead.
It can't be a swap cache page here, so just drop it.
Link: https://lkml.kernel.org/r/20240521175854.96038-4-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Before doing the op locally we need to check the cephx access.
Link: https://tracker.ceph.com/issues/61333
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Pull ceph updates from Ilya Dryomov:
"Assorted CephFS fixes and cleanups with nothing standing out"
* tag 'ceph-for-6.8-rc1' of https://github.com/ceph/ceph-client:
ceph: get rid of passing callbacks in __dentry_leases_walk()
ceph: d_obtain_{alias,root}(ERR_PTR(...)) will do the right thing
ceph: fix invalid pointer access if get_quota_realm return ERR_PTR
ceph: remove duplicated code in ceph_netfs_issue_read()
ceph: send oldest_client_tid when renewing caps
ceph: rename create_session_open_msg() to create_session_full_msg()
ceph: select FS_ENCRYPTION_ALGS if FS_ENCRYPTION
ceph: fix deadlock or deadcode of misusing dget()
ceph: try to allocate a smaller extent map for sparse read
libceph: remove MAX_EXTENTS check for sparse reads
ceph: reinitialize mds feature bit even when session in open
ceph: skip reconnecting if MDS is not ready
|
|
__dentry_leases_walk() gets a callback and calls it for
a bunch of denties; there are exactly two callers and
we already have a flag telling them apart - lwc->dir_lease.
Seeing that indirect calls are costly these days, let's
get rid of the callback and just call the right function
directly. Has a side benefit of saner signatures...
[ xiubli: a minor fix in the commit title ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Saves a pointer per struct dentry and actually makes the things less
clumsy. Cleaned the d_walk() and dcache_readdir() a bit by use
of hlist_for_... iterators.
A couple of new helpers - d_first_child() and d_next_sibling(),
to make the expressions less awful.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Enable mknod/symlink/mkdir iops to handle idmapped mounts.
This is just a matter of passing down the mount's idmapping.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Multiple CephFS mounts on a host is increasingly common so
disambiguating messages like this is necessary and will make it easier
to debug issues.
At the same this will improve the debug logs to make them easier to
troubleshooting issues, such as print the ino# instead only printing
the memory addresses of the corresponding inodes and print the dentry
names instead of the corresponding memory addresses for the dentry,etc.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
We need to covert the inode to ceph_client in the following commit,
and will add one new helper for that, here we rename the old helper
to _fs_client().
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
We will use the 'mdsc' to get the global_id in the following commits.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Instead of setting the no-key dentry, use the new
fscrypt_prepare_lookup_partial() helper. We still need to mark the
directory as incomplete if the directory was just unlocked.
In ceph_atomic_open() this fixes a bug where a dentry is incorrectly
set with DCACHE_NOKEY_NAME when 'dir' has been evicted but the key is
still available (for example, where there's a drop_caches).
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
With snapshot names encryption we can not allow snapshots to be created in
locked directories because the names wouldn't be encrypted. This patch
forces the directory to be unlocked to allow a snapshot to be created.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
For encrypted inodes, transmit a rounded-up size to the MDS as the
normal file size and send the real inode size in fscrypt_file field.
Also, fix up creates and truncates to also transmit fscrypt_file.
When we get an inode trace from the MDS, grab the fscrypt_file field if
the inode is encrypted, and use it to populate the i_size field instead
of the regular inode size field.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When setting a directory's crypt context, ceph_dir_clear_complete()
needs to be called otherwise if it was complete before, any existing
(old) dentry will still be valid.
This patch adds a wrapper around __fscrypt_prepare_readdir() which will
ensure a directory is marked as non-complete if key status changes.
[ xiubli: revise commit title per Milind ]
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Add the appropriate calls into fscrypt for various actions, including
link, rename, setattr, and the open codepaths.
Disable fallocate for encrypted inodes -- hopefully, just for now.
If we have an encrypted inode, then the client will need to re-encrypt
the contents of the new object. Disable copy offload to or from
encrypted inodes.
Set i_blkbits to crypto block size for encrypted inodes -- some of the
underlying infrastructure for fscrypt relies on i_blkbits being aligned
to crypto blocksize.
Report STATX_ATTR_ENCRYPTED on encrypted inodes.
[ lhenriques: forbid encryption with striped layouts ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When creating symlinks in encrypted directories, encrypt and
base64-encode the target with the new inode's key before sending to the
MDS.
When filling a symlinked inode, base64-decode it into a buffer that
we'll keep in ci->i_symlink. When get_link is called, decrypt the buffer
into a new one that will hang off i_link.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
