| Age | Commit message (Collapse) | Author |
|---|
|
'uuid_count' member of struct 'discovery_state' is assigned and read
without any locks, so there is a chance of situation when
uuid_count != 0, but uuids is NULL and there will be NULL pointer
dereference.
Possible race:
'hci_update_passive_scan_sync'
'hci_discovery_filter_clear'
hdev->discovery.uuid_count = 0;
<----------------------preempted----------------------------->
'start_service_discovery'
// Set uuid_count to value != 0
hdev->discovery.uuid_count = uuid_count;
hdev->discovery.uuids = kmemdup(...);
<----------------------preempted----------------------------->
spin_lock(&hdev->discovery.lock);
kfree(hdev->discovery.uuids);
hdev->discovery.uuids = NULL;
spin_unlock(&hdev->discovery.lock);
Now uuids == NULL and uuid_count != 0.
So 'mgmt_device_found' -> 'is_filter_match' -> 'eir_has_uuids' receives
non consistent discovery state, where NULL dereference of uuids happens.
To fix it let's add discovery.lock around every read/write of uuid_count,
uuids pair of struct members. It is also important to assign uuid_count
value only after success kmemdup() allocation in
start_service_discovery(), otherwise uuids is NULL, because kmemdup failed,
but uuid_count is already assigned to non zero value.
The following panic happens:
[ ] ------------[ cut here ]------------
[ ] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[ ] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
[ ] CPU: 0 PID: 15056 Comm: kworker/u9:2
[ ] Workqueue: hci0 hci_rx_work
[ ] pstate: 10400009 (nzcV daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ ] pc : eir_has_uuids+0x2d8/0x590
[ ] lr : is_filter_match+0x258/0x320
...
[ ] Call trace:
[ ] eir_has_uuids+0x2d8/0x590
[ ] is_filter_match+0x258/0x320
[ ] mgmt_device_found+0x5b0/0xafc
[ ] process_adv_report.part.0+0x8c8/0xf14
[ ] hci_le_adv_report_evt+0x338/0x3f0
[ ] hci_le_meta_evt+0x1f0/0x4c8
[ ] hci_event_packet+0x440/0xc9c
[ ] hci_rx_work+0x44c/0xaf8
[ ] process_one_work+0x54c/0x103c
[ ] worker_thread+0x6c4/0x10c4
[ ] kthread+0x274/0x2ec
[ ] ret_from_fork+0x10/0x20
[ ] Code: 14000004 91004021 eb14003f 54000180 (f9400024)
[ ] ---[ end trace 0000000000000000 ]---
Fixes: 2935e556850e ("Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()'")
Signed-off-by: Pavel Shpakovskiy <pashpakovskii@salutedevices.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
mgmt_hci_cmd_sync() checks that the message length agrees with params_len
but puts no upper bound on it. params_len is __le16 while the parameter
length in the HCI command header is a u8:
struct hci_command_hdr {
__le16 opcode;
__u8 plen;
} __packed;
hci_cmd_sync_alloc() assigns one to the other:
hdr->plen = plen;
if (plen)
skb_put_data(skb, param, plen);
so a params_len of 256 leaves plen at 0 while all 256 bytes are still
appended. The frame handed to the driver then declares no parameters and
carries 256 of them. On a length framed transport such as H:4 the
controller takes the trailing bytes as the start of the next packet.
The mgmt socket MTU is HCI_MAX_FRAME_SIZE, so params_len can reach about
1KB this way. Commit 03f1700b9b4d ("Bluetooth: MGMT: reject malformed
HCI_CMD_SYNC commands") only made params_len agree with the message
length, a value that fits the message but not the header field is still
accepted.
Reject params_len that does not fit the header field.
Fixes: 827af4787e74 ("Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
mgmt_hci_cmd_sync() queues the pending command with a NULL destroy
callback, so it is only freed if send_hci_cmd_sync() runs. A cancelled
entry is leaked, as _hci_cmd_sync_cancel_entry() does not release
entry->data when there is no destroy callback, and hci_cmd_sync_clear()
cancels every pending entry when the controller is unregistered. Nothing
else reclaims it either: mgmt_pending_new() does not put the command on
hdev->mgmt_pending.
The leak also pins the socket reference taken by mgmt_pending_new(), so
the mgmt socket is never released.
Free the command from a destroy callback. The now-empty done label is
replaced by a direct return.
Fixes: 827af4787e74 ("Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
mesh_send_cancel() queues the pending command with a NULL destroy
callback, so it is only freed if send_cancel() runs. A cancelled entry is
leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when
there is no destroy callback, and hci_cmd_sync_clear() cancels every
pending entry when the controller is unregistered. Nothing else reclaims
it either: mgmt_pending_new() does not put the command on
hdev->mgmt_pending.
The leak also pins the socket reference taken by mgmt_pending_new(), so
the mgmt socket is never released.
Free the command from a destroy callback.
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add context analysis annotations for hci_conn::l2cap_data locking.
Also add necessary lockdep_assert_held() and __must_hold annotations
to prove the access is safe.
The access in smp_conn_security() is supposed to be guarded by the
caller holding lock that blocks concurrent l2cap_conn_del() eg.
hdev->lock, conn->lock or chan->lock. Mark unsafe as can't be
automatically checked now.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add MGMT_OP_LOAD_CONN_SUBRATE (0x005C) command to load per-device
connection subrate parameters when the SCI feature is supported.
Add MGMT_EV_CONN_SUBRATE (0x0033) event to notify userspace when
connection rate changes occur via the LE Connection Rate Change HCI
event.
Add subrate fields (subrate_min, subrate_max, max_latency, cont_num)
to struct hci_conn_params to store the loaded subrate parameters, and
the corresponding le_rate_* fields to struct hci_conn to track the
parameters currently in use.
When a single entry is loaded for an already-connected central, or on
connection completion, the LE Connection Rate Request procedure is
initiated to apply the parameters.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add MGMT_SETTING_SCI (bit 25) to advertise support for the Shorter
Connection Interval (SCI) feature. It is reported in the supported
settings whenever the controller is SCI capable, and in the current
settings whenever LE is enabled and the controller is SCI capable
(SCI has no separate enable command, so it is a passive capability).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
MGMT_OP_SET_LOCAL_NAME is handled asynchronously on powered controllers
and can run set_name_sync(). When the controller is BR/EDR capable,
set_name_sync() updates the local name and then rebuilds EIR data through
eir_create(). The EIR builder walks hdev->uuids, but the UUID list can
be changed and entries can be freed by MGMT_OP_ADD_UUID and
MGMT_OP_REMOVE_UUID.
pending_eir_or_class() is meant to serialize management commands that
can change EIR or the class of device, but it did not include
MGMT_OP_SET_LOCAL_NAME. In addition, it walked hdev->mgmt_pending
without hdev->mgmt_pending_lock even though pending commands are added
and removed under that mutex. A racing command completion can therefore
remove and free a pending command while pending_eir_or_class() is still
inspecting it, leading to a use-after-free in the pending-command list or
allowing a local name update to rebuild EIR while UUID entries are being
removed.
Take hdev->mgmt_pending_lock while scanning hdev->mgmt_pending and treat
MGMT_OP_SET_LOCAL_NAME as an EIR/class-affecting pending command on the
powered asynchronous path. Check for a conflicting pending command before
copying the new short name so a rejected SET_LOCAL_NAME request does not
modify hdev->short_name.
Fixes: 6fe26f694c82 ("Bluetooth: MGMT: Protect mgmt_pending list with its own lock")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The pairing completion and authentication failure callbacks look up the
pending MGMT_OP_PAIR_DEVICE command by walking hdev->mgmt_pending. The
lookup returned a command that was still linked on the shared pending list,
without keeping mgmt_pending_lock held for the later dereference and
removal.
A concurrent MGMT_OP_CANCEL_PAIR_DEVICE request can remove and free the
same pending command before the callback uses it. The reverse race is also
possible when cancel_pair_device() gets a command from pending_find() and a
callback removes it before the cancel path dereferences it. This can lead
to a use-after-free and a second list_del().
Make the pairing lookup helpers transfer ownership of the pending command
by removing it from hdev->mgmt_pending while holding mgmt_pending_lock.
The callbacks and cancel path then complete the command and free it
directly, so racing paths cannot find or free the same command again. Take
a temporary hci_conn reference in cancel_pair_device() because the command
completion drops the reference stored in the pending command.
Fixes: e9a416b5ce0c ("Bluetooth: Add mgmt_pair_device command")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zihan Xi <xizh2024@lzu.edu.cn>
Reviewed-by: Ren Wei <enjou1224z@gmail.com>
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
MGMT_EV_DEVICE_DISCONNECTED carries a reason field which is defined to
be one of MGMT_DEV_DISCONN_* (0x00..0x05). hci_disconn_complete_evt()
converts the HCI error with hci_to_mgmt_reason(), but two other paths
pass the raw HCI error straight through:
hci_cs_disconnect() -> cp->reason
mgmt_connect_failed() -> status
The latter is reached whenever the adapter is powered off or suspended:
hci_disconnect_all_sync() aborts every link with
HCI_ERROR_REMOTE_POWER_OFF, hci_disconnect_sync() deliberately does not
wait for HCI_EV_DISCONN_COMPLETE for that reason, so that
hci_abort_conn_sync() finishes the connection off through
hci_conn_failed() instead.
As a result userspace sees an out of range reason:
@ MGMT Event: Device Disconnected (0x000c) plen 8
BR/EDR Address: 8C:A9:6F:2C:51:46
Reason: Reserved (0x15)
bluetoothd: btd_bearer_disconnected() Unknown disconnection value: 21
bluetoothd: device_disconnected() Unknown disconnection value: 21
Export hci_to_mgmt_reason() and use it in both places, so that a power
off is reported as MGMT_DEV_DISCONN_REMOTE rather than as the raw
HCI_ERROR_REMOTE_POWER_OFF (0x15).
Fixes: d47da6bd4cfa ("Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED")
Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Dereferencing RCU-protected pointers outside critical sections is
invalid and may lead to UAF. Use of hci_conn in hci_sync callbacks also
needs to hold refcount to avoid UAF.
Take appropriate locks for hci_conn lookups, and take refcount for
hci_conn pointers stored in mgmt_pending_cmd so that the pointer stays
valid.
When accessing conn->state, ensure hdev->lock is held to avoid data
race.
Fixes: 7b445e220db9 ("Bluetooth: MGMT: Fix holding hci_conn reference while command is queued")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Dereferencing RCU-protected pointers outside critical sections is
invalid and may lead to UAF.
Take hdev->lock for hci_conn lookup and hci_abort_conn(). Don't use RCU
to ensure the conn is fully initialized at this point.
Fixes: 227a0cdf4a028 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
MGMT_OP_LOAD_CONN_PARAM queues conn_update_sync() when a single parameter
update changes an existing LE central connection. The queued work currently
stores a borrowed hci_conn_params entry from hdev->le_conn_params. A later
LOAD_CONN_PARAM request can clear disabled parameters and free that entry
before hci_cmd_sync_work() runs the queued callback.
Do not keep the borrowed hci_conn_params pointer in queued work. Queue the
hci_conn instead and hold a reference until the queued callback completes.
When the work runs, revalidate that the connection is still present, look
up the current hci_conn_params entry, and cancel the update if userspace
removed that entry while the work was pending.
Copy the interval values from the current params entry under hdev->lock,
then drop the lock and keep using hci_le_conn_update_sync() to issue the
update.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in conn_update_sync+0x2a/0xf0 [bluetooth]
Read of size 1 at addr ffff88810c697126 by task kworker/u17:0/377
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
kasan_report+0xe0/0x110
conn_update_sync+0x2a/0xf0 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Allocated by task 466:
hci_conn_params_add+0xa6/0x240 [bluetooth]
load_conn_param+0x4e1/0x850 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
Freed by task 474:
kfree+0x313/0x590
hci_conn_params_clear_disabled+0x9b/0xc0 [bluetooth]
load_conn_param+0x4bf/0x850 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
Fixes: 0ece498c27d8c ("Bluetooth: MGMT: Make MGMT_OP_LOAD_CONN_PARAM update existing connection")
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_add_adv_monitor() publishes a new adv_monitor in
hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT
offload add path can then fail either locally before the controller add
command completes, or in the MSFT add callback. In the current queued
management add flow, hci_cmd_sync_work() still invokes
mgmt_add_adv_patterns_monitor_complete() with the original pending command
after msft_add_monitor_pattern() returns.
The buggy scenario involves two paths, with each column showing the order
within that path:
MSFT add handling MGMT completion
1. insert monitor and handle 1. receive sync error
2. send MSFT add command 2. call add-monitor completion
3. callback sees bad response 3. load cmd->user_data
4. callback frees monitor 4. read monitor->handle
Local MSFT setup failures have the other half of the same ownership bug:
they return an error after the IDR insertion, but no later code removes the
failed monitor from the IDR.
Keep ownership with the pending management command until its completion.
For normal management adds, the MSFT add callback now records successful
controller state and returns errors to its caller. The management
completion frees the monitor on non-success after copying the response
handle, while resume/reregister callback-error cleanup remains in the
MSFT callback. The success path keeps the existing bookkeeping.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x19f/0x330
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
kasan_report+0xe0/0x110
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? 0xffffffffc00d00da
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? hci_cmd_sync_work+0x1ab/0x210 [bluetooth]
hci_cmd_sync_work+0x1c0/0x210 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
process_one_work+0x4fd/0xbc0
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 471 on cpu 3 at 285.205389s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
__sys_sendto+0x2bc/0x2d0
__x64_sys_sendto+0x76/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 454 on cpu 2 at 285.217112s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
msft_add_monitor_sync+0x54a/0x570 [bluetooth]
hci_add_adv_monitor+0x133/0x180 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Fixes: a2a4dedf88ab ("Bluetooth: advmon offload MSFT add monitor")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
add_device_complete() runs from the hci_cmd_sync_work kworker, which
holds only hci_req_sync_lock and *not* hci_dev_lock. It calls
hci_conn_params_lookup() and then dereferences the returned object
(params->flags) without taking hci_dev_lock:
params = hci_conn_params_lookup(hdev, &cp->addr.bdaddr,
le_addr_type(cp->addr.type));
...
device_flags_changed(NULL, hdev, &cp->addr.bdaddr,
cp->addr.type, hdev->conn_flags,
params ? params->flags : 0);
hci_conn_params_lookup() walks hdev->le_conn_params and is documented to
require hdev->lock. A concurrent MGMT_OP_REMOVE_DEVICE
(remove_device()), which does run under hci_dev_lock, can call
hci_conn_params_free() to list_del() and kfree() the very object the
lookup returned, so the subsequent params->flags read touches freed
memory [0].
Hold hci_dev_lock() across the hci_conn_params_lookup() and the read of
params->flags (and the matching event emission) so the lookup result
cannot be freed by a concurrent remove_device() before it is used,
honouring the locking contract of hci_conn_params_lookup().
[0]: (trailing page/memory-state dump trimmed)
BUG: KASAN: slab-use-after-free in add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671
Read of size 1 at addr ffff000017ab26c1 by task kworker/u9:8/388
CPU: 1 UID: 0 PID: 388 Comm: kworker/u9:8 Not tainted 7.0.11 #20 PREEMPT
Hardware name: linux,dummy-virt (DT)
Workqueue: hci0 hci_cmd_sync_work
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:499 (C)
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xb4/0xd4 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x118/0x5d8 mm/kasan/report.c:482
kasan_report+0xb0/0xf4 mm/kasan/report.c:595
__asan_report_load1_noabort+0x20/0x2c mm/kasan/report_generic.c:378
add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671
hci_cmd_sync_work+0x14c/0x240 net/bluetooth/hci_sync.c:334
process_one_work+0x628/0xd38 kernel/workqueue.c:3289
process_scheduled_works kernel/workqueue.c:3372 [inline]
worker_thread+0x7a8/0xac0 kernel/workqueue.c:3453
kthread+0x39c/0x444 kernel/kthread.c:436
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Allocated by task 3401:
kasan_save_stack+0x3c/0x64 mm/kasan/common.c:57
kasan_save_track+0x20/0x3c mm/kasan/common.c:78
kasan_save_alloc_info+0x40/0x54 mm/kasan/generic.c:570
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xd4/0xd8 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__kmalloc_cache_noprof+0x1b0/0x458 mm/slub.c:5385
kmalloc_noprof include/linux/slab.h:950 [inline]
kzalloc_noprof include/linux/slab.h:1188 [inline]
hci_conn_params_add+0x10c/0x4b0 net/bluetooth/hci_core.c:2279
hci_conn_params_set net/bluetooth/mgmt.c:5162 [inline]
add_device+0x5b4/0xa54 net/bluetooth/mgmt.c:7755
hci_mgmt_cmd net/bluetooth/hci_sock.c:1721 [inline]
hci_sock_sendmsg+0x10b4/0x1dd0 net/bluetooth/hci_sock.c:1841
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xe0/0x128 net/socket.c:742
sock_write_iter+0x250/0x390 net/socket.c:1195
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x66c/0xab0 fs/read_write.c:688
ksys_write+0x1fc/0x24c fs/read_write.c:740
__do_sys_write fs/read_write.c:751 [inline]
__se_sys_write fs/read_write.c:748 [inline]
__arm64_sys_write+0x70/0xa4 fs/read_write.c:748
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x84/0x2a8 arch/arm64/kernel/syscall.c:49
el0_svc_common.constprop.0+0xe4/0x294 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x44/0x5c arch/arm64/kernel/syscall.c:151
el0_svc+0x38/0xac arch/arm64/kernel/entry-common.c:724
el0t_64_sync_handler+0xa0/0xe4 arch/arm64/kernel/entry-common.c:743
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:596
Freed by task 3740:
kasan_save_stack+0x3c/0x64 mm/kasan/common.c:57
kasan_save_track+0x20/0x3c mm/kasan/common.c:78
kasan_save_free_info+0x4c/0x74 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x88/0xb8 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2685 [inline]
slab_free mm/slub.c:6170 [inline]
kfree+0x14c/0x458 mm/slub.c:6488
hci_conn_params_free+0x288/0x484 net/bluetooth/hci_core.c:2312
remove_device+0x4b0/0x968 net/bluetooth/mgmt.c:7919
hci_mgmt_cmd net/bluetooth/hci_sock.c:1721 [inline]
hci_sock_sendmsg+0x10b4/0x1dd0 net/bluetooth/hci_sock.c:1841
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xe0/0x128 net/socket.c:742
sock_write_iter+0x250/0x390 net/socket.c:1195
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x66c/0xab0 fs/read_write.c:688
ksys_write+0x1fc/0x24c fs/read_write.c:740
__do_sys_write fs/read_write.c:751 [inline]
__se_sys_write fs/read_write.c:748 [inline]
__arm64_sys_write+0x70/0xa4 fs/read_write.c:748
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x84/0x2a8 arch/arm64/kernel/syscall.c:49
el0_svc_common.constprop.0+0xe4/0x294 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x44/0x5c arch/arm64/kernel/syscall.c:151
el0_svc+0x38/0xac arch/arm64/kernel/entry-common.c:724
el0t_64_sync_handler+0xa0/0xe4 arch/arm64/kernel/entry-common.c:743
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:596
Fixes: 1e2e3044c1bc ("Bluetooth: MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags")
Cc: stable@vger.kernel.org
Assisted-by: Bynario AI
Signed-off-by: Samuel Page <sam@bynar.io>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Many bluetooth source files are missing SPDX-License-Identifier
lines. Add appropriate IDs to these files, and remove other
license lines from the headers.
Leave the warranty disclaimer in files where the license ID is
GPL-2.0 but the wording of the disclaimer is slightly different
from that of the GPL v2 disclaimer.
It is not different enough to cause licensing conflicts, but is
kept to honor the original contributors' legal intent.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
bluetoothd has a bug with makes it send extra bytes as part of
MGMT_OP_ADD_EXT_ADV_DATA which are now being checked to be the
exact the expected length, relax this so only when the expected
length is greater than the data length to cause an error since
that would result in accessing invalid memory, otherwise just
ignore the extra bytes.
Link: https://lore.kernel.org/linux-bluetooth/20260602204749.210857-1-luiz.dentz@gmail.com/T/#u
Fixes: d3f7d17960ed ("Bluetooth: MGMT: validate Add Extended Advertising Data length")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
tlv_data_is_valid() reads each advertising data field length from
data[i], then inspects data[i + 1] for managed EIR types before
checking that the current field still fits inside the supplied buffer.
A malformed field whose length byte is the last byte of the buffer can
therefore make the parser read one byte past the advertising data.
KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING
request reached that path:
BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid()
Read of size 1
Call trace:
tlv_data_is_valid()
add_advertising()
hci_mgmt_cmd()
hci_sock_sendmsg()
Move the existing element-length check before any type-octet inspection
so each non-empty element is proven to contain its type byte before the
parser looks at data[i + 1].
Fixes: 2bb36870e8cb ("Bluetooth: Unify advertising instance flags check")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,
with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler
then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy
cp->data, but it never checks that those bytes are part of the mgmt
command payload.
A short command can therefore make add_ext_adv_data() pass an
out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond
the command buffer are addressable, they can also be copied into the
advertising instance as scan response data, where the caller can read
them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires
CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte
slab-out-of-bounds read.
Reject commands whose length does not match the fixed header plus both
advertising data lengths before parsing cp->data.
Fixes: 12410572833a ("Bluetooth: Break add adv into two mgmt commands")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
mesh_send() currently bounds MGMT_OP_MESH_SEND by total command
length, but it never verifies that the bytes supplied for the
flexible adv_data[] array actually match the embedded adv_data_len
field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a
truncated command can still pass the existing 20..50 byte range
check and later drive the async mesh send path past the end of the
queued command buffer.
Keep rejecting zero-length and oversized advertising payloads, but
validate adv_data_len explicitly and require the command length to
exactly match the flexible array size before queueing the request.
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Load Long Term Keys stores the user-provided enc_size and later uses
it to size fixed-size stack operations when replying to LE LTK
requests. An enc_size larger than the 16-byte key buffer can therefore
overflow the reply stack buffer.
Reject oversized enc_size values while validating the management LTK
record so invalid keys never reach the stored key state.
Fixes: 346af67b8d11 ("Bluetooth: Add MGMT handlers for dealing with SMP LTK's")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory.
Link: https://lore.kernel.org/linux-bluetooth/20260315132013.75ab40c5@kernel.org/T/#m1418f9c82eeff8510c1beaa21cf53af20db96c06
Fixes: 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
|
|
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced
mgmt_pending_valid(), which not only validates the pending command but
also unlinks it from the pending list if it is valid. This change in
semantics requires updates to several completion handlers to avoid list
corruption and memory safety issues.
This patch addresses two left-over issues from the aforementioned rework:
1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()
is replaced with mgmt_pending_free() in the success path. Since
mgmt_pending_valid() already unlinks the command at the beginning of
the function, calling mgmt_pending_remove() leads to a double list_del()
and subsequent list corruption/kernel panic.
2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error
path is removed. Since the current command is already unlinked by
mgmt_pending_valid(), this foreach loop would incorrectly target other
pending mesh commands, potentially freeing them while they are still being
processed concurrently (leading to UAFs). The redundant mgmt_cmd_status()
is also simplified to use cmd->opcode directly.
Fixes: 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Wang Tao <wangtao554@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures
are not freed after being removed from the pending list.
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced
mgmt_pending_foreach() calls with individual command handling but missed
adding mgmt_pending_free() calls in both error and success paths of
set_ssp_complete(). Other completion functions like set_le_complete()
were fixed correctly in the same commit.
This causes a memory leak of the mgmt_pending_cmd structure and its
associated parameter data for each SSP command that completes.
Add the missing mgmt_pending_free(cmd) calls in both code paths to fix
the memory leak. Also fix the same issue in set_advertising_complete().
Fixes: 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
MGMT_SETTING_ISO_BROADCASTER and MGMT_SETTING_ISO_RECEIVER flags are
missing from supported_settings although they are in current_settings.
Report them also in supported_settings to be consistent.
Fixes: ae7533613133 ("Bluetooth: Check for ISO support in controller")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
In certain cases setting devices flags like HCI_CONN_FLAG_PAST it
shouldn't require to do Add Device first since it may not need to add
an auto-connect policy, so this instead just automatically creates
a hci_conn_params if one cannot be found using HCI_AUTO_CONN_DISABLED.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This adds PAST related commands (HCI_OP_LE_PAST,
HCI_OP_LE_PAST_SET_INFO and HCI_OP_LE_PAST_PARAMS) and events
(HCI_EV_LE_PAST_RECEIVED) along with handling of PAST sender and
receiver features bits including new MGMG settings (
HCI_EV_LE_PAST_RECEIVED and MGMT_SETTING_PAST_RECEIVER) which
userspace can use to determine if PAST is supported by the
controller.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
mesh_send_done timer is not canceled when hdev is removed, which causes
crash if the timer triggers after hdev is gone.
Cancel the timer when MGMT removes the hdev, like other MGMT timers.
Should fix the BUG: sporadically seen by BlueZ test bot
(in "Mesh - Send cancel - 1" test).
Log:
------
BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0
...
Freed by task 36:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x43/0x70
kfree+0x103/0x500
device_release+0x9a/0x210
kobject_put+0x100/0x1e0
vhci_release+0x18b/0x240
------
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh")
Link: https://lore.kernel.org/linux-bluetooth/67364c09.0c0a0220.113cba.39ff@mx.google.com/
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
In the parse_adv_monitor_pattern() function, the value of
the 'length' variable is currently limited to HCI_MAX_EXT_AD_LENGTH(251).
The size of the 'value' array in the mgmt_adv_pattern structure is 31.
If the value of 'pattern[i].length' is set in the user space
and exceeds 31, the 'patterns[i].value' array can be accessed
out of bound when copied.
Increasing the size of the 'value' array in
the 'mgmt_adv_pattern' structure will break the userspace.
Considering this, and to avoid OOB access revert the limits for 'offset'
and 'length' back to the value of HCI_MAX_AD_LENGTH.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: db08722fc7d4 ("Bluetooth: hci_core: Fix missing instances using HCI_MAX_AD_LENGTH")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
There is a BUG: KASAN: stack-out-of-bounds in set_mesh_sync due to
memcpy from badly declared on-stack flexible array.
Another crash is in set_mesh_complete() due to double list_del via
mgmt_pending_valid + mgmt_pending_remove.
Use DEFINE_FLEX to declare the flexible array right, and don't memcpy
outside bounds.
As mgmt_pending_valid removes the cmd from list, use mgmt_pending_free,
and also report status on error.
Fixes: 302a1f674c00d ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The debug UUID was only getting set if MGMT_OP_READ_EXP_FEATURES_INFO
was not called with a specific index which breaks the likes of
bluetoothd since it only invokes MGMT_OP_READ_EXP_FEATURES_INFO when an
adapter is plugged, so instead of depending hdev not to be set just
enable the UUID on any index like it was done with iso_sock_uuid.
Fixes: e625e50ceee1 ("Bluetooth: Introduce debug feature when dynamic debug is disabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This attemps to fix possible UAFs caused by struct mgmt_pending being
freed while still being processed like in the following trace, in order
to fix mgmt_pending_valid is introduce and use to check if the
mgmt_pending hasn't been removed from the pending list, on the complete
callbacks it is used to check and in addtion remove the cmd from the list
while holding mgmt_pending_lock to avoid TOCTOU problems since if the cmd
is left on the list it can still be accessed and freed.
BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223
Read of size 8 at addr ffff8880709d4dc0 by task kworker/u11:0/55
CPU: 0 UID: 0 PID: 55 Comm: kworker/u11:0 Not tainted 6.16.4 #2 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
mgmt_add_adv_patterns_monitor_sync+0x35/0x50 net/bluetooth/mgmt.c:5223
hci_cmd_sync_work+0x210/0x3a0 net/bluetooth/hci_sync.c:332
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x711/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 home/kwqcheii/source/fuzzing/kernel/kasan/linux-6.16.4/arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 12210:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4364
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
mgmt_pending_new+0x65/0x1e0 net/bluetooth/mgmt_util.c:269
mgmt_pending_add+0x35/0x140 net/bluetooth/mgmt_util.c:296
__add_adv_patterns_monitor+0x130/0x200 net/bluetooth/mgmt.c:5247
add_adv_patterns_monitor+0x214/0x360 net/bluetooth/mgmt.c:5364
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:729
sock_write_iter+0x258/0x330 net/socket.c:1133
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 12221:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4648 [inline]
kfree+0x18e/0x440 mm/slub.c:4847
mgmt_pending_free net/bluetooth/mgmt_util.c:311 [inline]
mgmt_pending_foreach+0x30d/0x380 net/bluetooth/mgmt_util.c:257
__mgmt_power_off+0x169/0x350 net/bluetooth/mgmt.c:9444
hci_dev_close_sync+0x754/0x1330 net/bluetooth/hci_sync.c:5290
hci_dev_do_close net/bluetooth/hci_core.c:501 [inline]
hci_dev_close+0x108/0x200 net/bluetooth/hci_core.c:526
sock_do_ioctl+0xd9/0x300 net/socket.c:1192
sock_ioctl+0x576/0x790 net/socket.c:1313
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: cf75ad8b41d2 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED")
Fixes: 2bd1b237616b ("Bluetooth: hci_sync: Convert MGMT_OP_SET_DISCOVERABLE to use cmd_sync")
Fixes: f056a65783cc ("Bluetooth: hci_sync: Convert MGMT_OP_SET_CONNECTABLE to use cmd_sync")
Fixes: 3244845c6307 ("Bluetooth: hci_sync: Convert MGMT_OP_SSP")
Fixes: d81a494c43df ("Bluetooth: hci_sync: Convert MGMT_OP_SET_LE")
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh")
Fixes: 6f6ff38a1e14 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_LOCAL_NAME")
Fixes: 71efbb08b538 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_PHY_CONFIGURATION")
Fixes: b747a83690c8 ("Bluetooth: hci_sync: Refactor add Adv Monitor")
Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY")
Fixes: 26ac4c56f03f ("Bluetooth: hci_sync: Convert MGMT_OP_SET_ADVERTISING")
Reported-by: cen zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Function set_name_sync() uses hdev->dev_name field to send
HCI_OP_WRITE_LOCAL_NAME command, but copying from data to hdev->dev_name
is called after mgmt cmd was queued, so it is possible that function
set_name_sync() will read old name value.
This change adds name as a parameter for function hci_update_name_sync()
to avoid race condition.
Fixes: 6f6ff38a1e14 ("Bluetooth: hci_sync: Convert MGMT_OP_SET_LOCAL_NAME")
Signed-off-by: Pavel Shpakovskiy <pashpakovskii@salutedevices.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When a BIG sync is lost, the device should be set to "disconnected".
This ensures symmetry with the ISO path setup, where the device is
marked as "connected" once the path is established. Without this
change, the device state remains inconsistent and may lead to a
memory leak.
Fixes: b2a5f2e1c127 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event")
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
ll_privacy_capable only indicates that the controller supports the
feature but it doesnt' check that LE is enabled so it end up being
marked as active in the current settings when it shouldn't.
Fixes: ad383c2c65a5 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
{cis,bis}_capable only indicates the controller supports the feature
since it doesn't check that LE is enabled so it shall not be used for
current setting, instead this introduces {cis,bis}_enabled macros that
can be used to indicate that these features are currently enabled.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Fixes: ae7533613133 ("Bluetooth: Check for ISO support in controller")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Currently, BIS_LINK is used for both BIG sync and PA sync connections,
which makes it impossible to distinguish them when searching for a PA
sync connection.
Adding PA_LINK will make the distinction clearer and simplify future
extensions for PA-related features.
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The 'quirks' member already ran out of bits on some platforms some time
ago. Replace the integer member by a bitmap in order to have enough bits
in future. Replace raw bit operations by accessor macros.
Fixes: ff26b2dd6568 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING")
Fixes: 127881334eaa ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE")
Suggested-by: Pauli Virtanen <pav@iki.fi>
Tested-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The unconditional call of hci_disable_advertising_sync() in
mesh_send_done_sync() also disables other LE advertisings (non mesh
related).
I am not sure whether this call is required at all, but checking the
adv_instances list (like done at other places) seems to solve the
problem.
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
According to the message of commit b338d91703fa ("Bluetooth: Implement
support for Mesh"), MGMT_OP_SET_MESH_RECEIVER should set the passive scan
parameters. Currently the scan interval and window parameters are
silently ignored, although user space (bluetooth-meshd) expects that
they can be used [1]
[1] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/mesh/mesh-io-mgmt.c#n344
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the following errors:
net/bluetooth/mgmt.c:5400:59: sparse: sparse: incorrect type in argument 3
(different base types) @@ expected unsigned short [usertype] handle @@
got restricted __le16 [usertype] monitor_handle @@
net/bluetooth/mgmt.c:5400:59: sparse: expected unsigned short [usertype] handle
net/bluetooth/mgmt.c:5400:59: sparse: got restricted __le16 [usertype] monitor_handle
Fixes: e6ed54e86aae ("Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506060347.ux2O1p7L-lkp@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This uses a mutex to protect from concurrent access of mgmt_pending
list which can cause crashes like:
==================================================================
BUG: KASAN: slab-use-after-free in hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91
Read of size 2 at addr ffff0000c48885b2 by task syz.4.334/7318
CPU: 0 UID: 0 PID: 7318 Comm: syz.4.334 Not tainted 6.15.0-rc7-syzkaller-g187899f4124a #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:466 (C)
__dump_stack+0x30/0x40 lib/dump_stack.c:94
dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120
print_address_description+0xa8/0x254 mm/kasan/report.c:408
print_report+0x68/0x84 mm/kasan/report.c:521
kasan_report+0xb0/0x110 mm/kasan/report.c:634
__asan_report_load2_noabort+0x20/0x2c mm/kasan/report_generic.c:379
hci_sock_get_channel+0x60/0x68 net/bluetooth/hci_sock.c:91
mgmt_pending_find+0x7c/0x140 net/bluetooth/mgmt_util.c:223
pending_find net/bluetooth/mgmt.c:947 [inline]
remove_adv_monitor+0x44/0x1a4 net/bluetooth/mgmt.c:5445
hci_mgmt_cmd+0x780/0xc00 net/bluetooth/hci_sock.c:1712
hci_sock_sendmsg+0x544/0xbb0 net/bluetooth/hci_sock.c:1832
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
sock_write_iter+0x25c/0x378 net/socket.c:1131
new_sync_write fs/read_write.c:591 [inline]
vfs_write+0x62c/0x97c fs/read_write.c:684
ksys_write+0x120/0x210 fs/read_write.c:736
__do_sys_write fs/read_write.c:747 [inline]
__se_sys_write fs/read_write.c:744 [inline]
__arm64_sys_write+0x7c/0x90 fs/read_write.c:744
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Allocated by task 7037:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_alloc_info+0x44/0x54 mm/kasan/generic.c:562
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x9c/0xb4 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4327 [inline]
__kmalloc_noprof+0x2fc/0x4c8 mm/slub.c:4339
kmalloc_noprof include/linux/slab.h:909 [inline]
sk_prot_alloc+0xc4/0x1f0 net/core/sock.c:2198
sk_alloc+0x44/0x3ac net/core/sock.c:2254
bt_sock_alloc+0x4c/0x300 net/bluetooth/af_bluetooth.c:148
hci_sock_create+0xa8/0x194 net/bluetooth/hci_sock.c:2202
bt_sock_create+0x14c/0x24c net/bluetooth/af_bluetooth.c:132
__sock_create+0x43c/0x91c net/socket.c:1541
sock_create net/socket.c:1599 [inline]
__sys_socket_create net/socket.c:1636 [inline]
__sys_socket+0xd4/0x1c0 net/socket.c:1683
__do_sys_socket net/socket.c:1697 [inline]
__se_sys_socket net/socket.c:1695 [inline]
__arm64_sys_socket+0x7c/0x94 net/socket.c:1695
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
Freed by task 6607:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x68/0x88 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2380 [inline]
slab_free mm/slub.c:4642 [inline]
kfree+0x17c/0x474 mm/slub.c:4841
sk_prot_free net/core/sock.c:2237 [inline]
__sk_destruct+0x4f4/0x760 net/core/sock.c:2332
sk_destruct net/core/sock.c:2360 [inline]
__sk_free+0x320/0x430 net/core/sock.c:2371
sk_free+0x60/0xc8 net/core/sock.c:2382
sock_put include/net/sock.h:1944 [inline]
mgmt_pending_free+0x88/0x118 net/bluetooth/mgmt_util.c:290
mgmt_pending_remove+0xec/0x104 net/bluetooth/mgmt_util.c:298
mgmt_set_powered_complete+0x418/0x5cc net/bluetooth/mgmt.c:1355
hci_cmd_sync_work+0x204/0x33c net/bluetooth/hci_sync.c:334
process_one_work+0x7e8/0x156c kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x958/0xed8 kernel/workqueue.c:3400
kthread+0x5fc/0x75c kernel/kthread.c:464
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:847
Fixes: a380b6cff1a2 ("Bluetooth: Add generic mgmt helper API")
Closes: https://syzkaller.appspot.com/bug?extid=0a7039d5d9986ff4ecec
Closes: https://syzkaller.appspot.com/bug?extid=cc0cc52e7f43dc9e6df1
Reported-by: syzbot+0a7039d5d9986ff4ecec@syzkaller.appspotmail.com
Tested-by: syzbot+0a7039d5d9986ff4ecec@syzkaller.appspotmail.com
Tested-by: syzbot+cc0cc52e7f43dc9e6df1@syzkaller.appspotmail.com
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This reworks MGMT_OP_REMOVE_ADV_MONITOR to not use mgmt_pending_add to
avoid crashes like bellow:
==================================================================
BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406
Read of size 8 at addr ffff88801c53f318 by task kworker/u5:5/5341
CPU: 0 UID: 0 PID: 5341 Comm: kworker/u5:5 Not tainted 6.15.0-syzkaller-10402-g4cb6c8af8591 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406
hci_cmd_sync_work+0x261/0x3a0 net/bluetooth/hci_sync.c:334
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402
kthread+0x711/0x8a0 kernel/kthread.c:464
ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 5987:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
mgmt_pending_new+0x65/0x240 net/bluetooth/mgmt_util.c:252
mgmt_pending_add+0x34/0x120 net/bluetooth/mgmt_util.c:279
remove_adv_monitor+0x103/0x1b0 net/bluetooth/mgmt.c:5454
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:727
sock_write_iter+0x258/0x330 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x548/0xa90 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5989:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2380 [inline]
slab_free mm/slub.c:4642 [inline]
kfree+0x18e/0x440 mm/slub.c:4841
mgmt_pending_foreach+0xc9/0x120 net/bluetooth/mgmt_util.c:242
mgmt_index_removed+0x10d/0x2f0 net/bluetooth/mgmt.c:9366
hci_sock_bind+0xbe9/0x1000 net/bluetooth/hci_sock.c:1314
__sys_bind_socket net/socket.c:1810 [inline]
__sys_bind+0x2c3/0x3e0 net/socket.c:1841
__do_sys_bind net/socket.c:1846 [inline]
__se_sys_bind net/socket.c:1844 [inline]
__x64_sys_bind+0x7a/0x90 net/socket.c:1844
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 66bd095ab5d4 ("Bluetooth: advmon offload MSFT remove monitor")
Closes: https://syzkaller.appspot.com/bug?extid=feb0dc579bbe30a13190
Reported-by: syzbot+feb0dc579bbe30a13190@syzkaller.appspotmail.com
Tested-by: syzbot+feb0dc579bbe30a13190@syzkaller.appspotmail.com
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
In 'mgmt_hci_cmd_sync()', check whether the size of parameters passed
in 'struct mgmt_cp_hci_cmd_sync' matches the total size of the data
(i.e. 'sizeof(struct mgmt_cp_hci_cmd_sync)' plus trailing bytes).
Otherwise, large invalid 'params_len' will cause 'hci_cmd_sync_alloc()'
to do 'skb_put_data()' from an area beyond the one actually passed to
'mgmt_hci_cmd_sync()'.
Reported-by: syzbot+5fe2d5bfbfbec0b675a0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5fe2d5bfbfbec0b675a0
Fixes: 827af4787e74 ("Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Use separate link type id for unicast and broadcast ISO connections.
These connection types are handled with separate HCI commands, socket
API is different, and hci_conn has union fields that are different in
the two cases, so they shall not be mixed up.
Currently in most places it is attempted to distinguish ucast by
bacmp(&c->dst, BDADDR_ANY) but it is wrong as dst is set for bcast sink
hci_conn in iso_conn_ready(). Additionally checking sync_handle might be
OK, but depends on details of bcast conn configuration flow.
To avoid complicating it, use separate link types.
Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Device flags could be updated in the meantime while MGMT_OP_ADD_DEVICE
is pending on hci_update_passive_scan_sync so instead of setting the
current_flags as cmd->user_data just do a lookup using
hci_conn_params_lookup and use the latest stored flags.
Fixes: a182d9c84f9c ("Bluetooth: MGMT: Fix Add Device to responding before completing")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This adds LL Privacy (bit 22) to Read Controller Information so the likes
of bluetoothd(1) can detect when the controller supports it or not.
Fixes: e209e5ccc5ac ("Bluetooth: MGMT: Mark LL Privacy as stable")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
