| Age | Commit message (Collapse) | Author |
|---|
|
Since BIG TCP for UDP tunnels will start using len=0 in the UDP header
as an indicator of a GSO packet bigger than 65535 bytes, this commit
introduces the following getter and setters to use tree-wide, in order
to explicitly mark places where len=0 may be expected, and handle them
properly:
1. udp_set_len() sets uh->len to its real value if it's not bigger than
65535, and to 0 otherwise: to be used in GSO context with aggregated
packets.
2. udp_set_len_short() is to be used when the length is known to fit 16
bits. It WARNs when the caller tries to assign a bigger value if
CONFIG_DEBUG_NET=y.
3. udp_get_len_short() returns len in host byte order: to be used on the
RX side to deal with non-aggregated packets, or to access the raw value
of the len field.
4. udp_get_len() decodes uh->len set by udp_set_len(). It checks whether
the packet is GSO to guard from malformed packets.
At the moment udp_set_len() is not used, a following commit will start
using it after enabling len>65535 for GSO.
Raw uh->len (in network byte order) is still accessed in a few places
for checksum calculation purposes, and to decode len=0 in udpv6_rcv for
jumbograms. udp_rcv and udpv6_rcv will be addressed by the commit that
starts using udp_set_len() to set UDP len=0 for BIG TCP packets in UDP
tunnels.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20260710134242.216538-2-alice.kernel@fastmail.im
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In esp_output_tail(), when esp->inplace is false, the old skb page frags
are replaced with a new page from the xfrm page_frag cache The source
scatterlist (sg) is built from the old frags before the replacement, and
esp_ssg_unref() is responsible for releasing the old page references
after the crypto operation completes
However, if the second skb_to_sgvec() call (which builds the destination
scatterlist from the new page) fails, the code jumps to error_free which
only calls kfree(tmp). The old page frag references captured in the
source scatterlist are never released:
1 sg[] is built from old frags via skb_to_sgvec() (no extra get_page)
2 nr_frags is set to 1 and frag[0] is replaced with the new page
3 Second skb_to_sgvec() fails -> goto error_free
Fix this by adding a bool parameter to esp_ssg_unref() that, when true,
unconditionally unrefs the source scatterlist frags. Since req->src is
not yet initialized by aead_request_set_crypt() at the point of the
error, the source scatterlist is obtained directly via esp_req_sg()
Existing callers pass false to preserve the original behavior
The same issue exists in both esp4 and esp6 as the code is identical
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Alessandro Schino <7991aleschino@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This reverts commit 2982e599fff6faa21c8df147d96fc7af6c1a2f24.
The patch does not fully fix the issue and the Author does
not match the 'Signed-off-by:' tag, so revert it for now.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The ESP out-of-place fast path appends the trailer in esp_output_head()
before esp_output_tail() allocates the destination page frag. The
head-side gate currently checks skb->data_len and tailen separately, but
the tail code allocates a single destination frag from the combined
post-trailer skb->data_len.
Reject the page-frag fast path when the combined aligned length exceeds a
page. Otherwise skb_page_frag_refill() may fall back to a single page while
the destination sg still spans the combined skb->data_len.
Restore this combined-length page gate for both IPv4 and IPv6.
Fixes: 5bd8baab087d ("esp: limit skb_page_frag_refill use to a single page")
Cc: stable@vger.kernel.org
Signed-off-by: Lin Ma <malin89@huawei.com>
Signed-off-by: Chenyuan Mi <michenyuan@huawei.com>
Signed-off-by: Jingguo Tan <tanjingguo@huawei.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In esp_output_tail(), when esp->inplace is false, the old skb page frags
are replaced with a new page from the xfrm page_frag cache. The source
scatterlist (sg) is built from the old frags before the replacement, and
esp_ssg_unref() is responsible for releasing the old page references
after the crypto operation completes.
However, if the second skb_to_sgvec() call (which builds the destination
scatterlist from the new page) fails, the code jumps to error_free which
only calls kfree(tmp). The old page frag references captured in the
source scatterlist are never released:
1. sg[] is built from old frags via skb_to_sgvec() (no extra get_page)
2. nr_frags is set to 1 and frag[0] is replaced with the new page
3. Second skb_to_sgvec() fails -> goto error_free
4. kfree(tmp) frees the sg[] memory but old frags are not unref'd
5. kfree_skb() only releases frag[0] (the new page), not the old ones
Fix this by adding a bool parameter to esp_ssg_unref() that, when true,
unconditionally unrefs the source scatterlist frags without checking
req->src and req->dst, since those fields are not yet initialized by
aead_request_set_crypt() at the point of the error. Existing callers
pass false to preserve the original behavior.
The same issue exists in both esp4 and esp6 as the code is identical.
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Alessandro Schino <7991aleschino@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
MSG_SPLICE_PAGES can attach pages from a pipe directly to an skb. TCP
marks such skbs with SKBFL_SHARED_FRAG after skb_splice_from_iter(),
so later paths that may modify packet data can first make a private
copy. The IPv4/IPv6 datagram append paths did not set this flag when
splicing pages into UDP skbs.
That leaves an ESP-in-UDP packet made from shared pipe pages looking
like an ordinary uncloned nonlinear skb. ESP input then takes the no-COW
fast path for uncloned skbs without a frag_list and decrypts in place
over data that is not owned privately by the skb.
Mark IPv4/IPv6 datagram splice frags with SKBFL_SHARED_FRAG, matching
TCP. Also make ESP input fall back to skb_cow_data() when the flag is
present, so ESP does not decrypt externally backed frags in place.
Private nonlinear skb frags still use the existing fast path.
This intentionally does not change ESP output. In esp_output_head(),
the path that appends the ESP trailer to existing skb tailroom without
calling skb_cow_data() is not reachable for nonlinear skbs:
skb_tailroom() returns zero when skb->data_len is nonzero, while ESP
tailen is positive. Thus ESP output will either use the separate
destination-frag path or fall back to skb_cow_data().
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Fixes: 7da0dde68486 ("ip, udp: Support MSG_SPLICE_PAGES")
Fixes: 6d8192bd69bb ("ip6, udp6: Support MSG_SPLICE_PAGES")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Reported-by: Kuan-Ting Chen <h3xrabbit@gmail.com>
Tested-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Ting Chen <h3xrabbit@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When the TX queue for espintcp is full, esp_output_tail_tcp will
return an error and not free the skb, because with synchronous crypto,
the common xfrm output code will drop the packet for us.
With async crypto (esp_output_done), we need to drop the skb when
esp_output_tail_tcp returns an error.
Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
These socket lookup functions required struct inet_hashinfo because
they are shared by TCP and DCCP.
* __inet_lookup_established()
* __inet_lookup_listener()
* __inet6_lookup_established()
* inet6_lookup_listener()
DCCP has gone, and we don't need to pass hashinfo down to them.
Let's fetch net->ipv4.tcp_death_row.hashinfo directly in the above
4 functions.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250822190803.540788-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current scheme for caching the encap socket can lead to reference
leaks when we try to delete the netns.
The reference chain is: xfrm_state -> enacp_sk -> netns
Since the encap socket is a userspace socket, it holds a reference on
the netns. If we delete the espintcp state (through flush or
individual delete) before removing the netns, the reference on the
socket is dropped and the netns is correctly deleted. Otherwise, the
netns may not be reachable anymore (if all processes within the ns
have terminated), so we cannot delete the xfrm state to drop its
reference on the socket.
This patch results in a small (~2% in my tests) performance
regression.
A GC-type mechanism could be added for the socket cache, to clear
references if the state hasn't been used "recently", but it's a lot
more complex than just not caching the socket.
Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
A few error paths are missing a kfree_skb.
Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-01-27
1) Fix incrementing the upper 32 bit sequence numbers for GSO skbs.
From Jianbo Liu.
2) Fix an out-of-bounds read on xfrm state lookup.
From Florian Westphal.
3) Fix secpath handling on packet offload mode.
From Alexandre Cassen.
4) Fix the usage of skb->sk in the xfrm layer.
5) Don't disable preemption while looking up cache state
to fix PREEMPT_RT.
From Sebastian Sewior.
* tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Don't disable preemption while looking up cache state.
xfrm: Fix the usage of skb->sk
xfrm: delete intermediate secpath entry in packet offload mode
xfrm: state: fix out-of-bounds read during lookup
xfrm: replay: Fix the update of replay_esn->oseq_hi for GSO
====================
Link: https://patch.msgid.link/20250127060757.3946314-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xfrm assumed to always have a full socket at skb->sk.
This is not always true, so fix it by converting to a
full socket before it is used.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
Define `XFRM_MODE_IPTFS` and `IPSEC_MODE_IPTFS` constants, and add these to
switch case and conditionals adjacent with the existing TUNNEL modes.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Make skb_frag_page() fail in the case where the frag is not backed
by a page, and fix its relevant callers to handle this case.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-8-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge in late fixes to prepare for the 6.11 net-next PR.
Conflicts:
93c3a96c301f ("net: pse-pd: Do not return EOPNOSUPP if config is null")
4cddb0f15ea9 ("net: ethtool: pse-pd: Fix possible null-deref")
30d7b6727724 ("net: ethtool: Add new power limit get and set features")
https://lore.kernel.org/20240715123204.623520bb@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
esp_xmit() is already able to handle UDP encapsulation through the call to
esp_output_head(). However, the ESP header and the outer IP header
are not correct and need to be corrected.
Test: Enabled both dir=in/out IPsec crypto offload, and verified IPv4
UDP-encapsulated ESP packets on both wifi/cellular network
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
xmit() functions should consume skb or return error codes in error
paths.
When the configuration "CONFIG_INET_ESPINTCP" is not set, the
implementation of the function "esp_output_tail_tcp" violates this rule.
The function frees the skb and returns the error code.
This change removes the kfree_skb from both functions, for both
esp4 and esp6.
WARN_ON is added because esp_output_tail_tcp() should never be called if
CONFIG_INET_ESPINTCP is not set.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-05-03
1) Remove Obsolete UDP_ENCAP_ESPINUDP_NON_IKE Support.
This was defined by an early version of an IETF draft
that did not make it to a standard.
2) Introduce direction attribute for xfrm states.
xfrm states have a direction, a stsate can be used
either for input or output packet processing.
Add a direction to xfrm states to make it clear
for what a xfrm state is used.
* tag 'ipsec-next-2024-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Restrict SA direction attribute to specific netlink message types
xfrm: Add dir validation to "in" data path lookup
xfrm: Add dir validation to "out" data path lookup
xfrm: Add Direction to the SA in or out
udpencap: Remove Obsolete UDP_ENCAP_ESPINUDP_NON_IKE Support
====================
Link: https://lore.kernel.org/r/20240503082732.2835810-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The UDP_ENCAP_ESPINUDP_NON_IKE mode, introduced into the Linux kernel
in 2004 [2], has remained inactive and obsolete for an extended period.
This mode was originally defined in an early version of an IETF draft
[1] from 2001. By the time it was integrated into the kernel in 2004 [2],
it had already been replaced by UDP_ENCAP_ESPINUDP [3] in later
versions of draft-ietf-ipsec-udp-encaps, particularly in version 06.
Over time, UDP_ENCAP_ESPINUDP_NON_IKE has lost its relevance, with no
known use cases.
With this commit, we remove support for UDP_ENCAP_ESPINUDP_NON_IKE,
simplifying the codebase and eliminating unnecessary complexity.
Kernel will return an error -ENOPROTOOPT if the userspace tries to set
this option.
References:
[1] https://datatracker.ietf.org/doc/html/draft-ietf-ipsec-udp-encaps-00.txt
[2] Commit that added UDP_ENCAP_ESPINUDP_NON_IKE to the Linux historic
repository.
Author: Andreas Gruenbacher <agruen@suse.de>
Date: Fri Apr 9 01:47:47 2004 -0700
[IPSEC]: Support draft-ietf-ipsec-udp-encaps-00/01, some ipec impls need it.
[3] Commit that added UDP_ENCAP_ESPINUDP to the Linux historic
repository.
Author: Derek Atkins <derek@ihtfp.com>
Date: Wed Apr 2 13:21:02 2003 -0800
[IPSEC]: Implement UDP Encapsulation framework.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add a new header, linux/skbuff_ref.h, which contains all the skb_*_ref()
helpers. Many of the consumers of skbuff.h do not actually use any of
the skb ref helpers, and we can speed up compilation a bit by minimizing
this header file.
Additionally in the later patch in the series we add page_pool support
to skb_frag_ref(), which requires some page_pool dependencies. We can
now add these dependencies to skbuff_ref.h instead of a very ubiquitous
skbuff.h
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://lore.kernel.org/r/20240410190505.1225848-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The implementations of these 2 functions are almost identical. Remove
the implementation of napi_frag_unref, and make it a call into
skb_page_unref so we don't duplicate the implementation.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240408153000.2152844-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since we have pool->p.napi (Jakub) and pool->cpuid (Lorenzo) to check
whether it's safe to use direct recycling, we can use both globally for
each page instead of relying solely on @allow_direct argument.
Let's assume that @allow_direct means "I'm sure it's local, don't waste
time rechecking this" and when it's false, try the mentioned params to
still recycle the page directly. If neither is true, we'll lose some
CPU cycles, but then it surely won't be hotpath. On the other hand,
paths where it's possible to use direct cache, but not possible to
safely set @allow_direct, will benefit from this move.
The whole propagation of @napi_safe through a dozen of skb freeing
functions can now go away, which saves us some stack space.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240329165507.3240110-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the skb is reorganized during esp_output (!esp->inline), the pages
coming from the original skb fragments are supposed to be released back
to the system through put_page. But if the skb fragment pages are
originating from a page_pool, calling put_page on them will trigger a
page_pool leak which will eventually result in a crash.
This leak can be easily observed when using CONFIG_DEBUG_VM and doing
ipsec + gre (non offloaded) forwarding:
BUG: Bad page state in process ksoftirqd/16 pfn:1451b6
page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6
flags: 0x200000000000000(node=0|zone=2)
page_type: 0xffffffff()
raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000
raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000
page dumped because: page_pool leak
Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core]
CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x36/0x50
bad_page+0x70/0xf0
free_unref_page_prepare+0x27a/0x460
free_unref_page+0x38/0x120
esp_ssg_unref.isra.0+0x15f/0x200
esp_output_tail+0x66d/0x780
esp_xmit+0x2c5/0x360
validate_xmit_xfrm+0x313/0x370
? validate_xmit_skb+0x1d/0x330
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x23e/0x350
__dev_queue_xmit+0x337/0xba0
? nf_hook_slow+0x3f/0xd0
ip_finish_output2+0x25e/0x580
iptunnel_xmit+0x19b/0x240
ip_tunnel_xmit+0x5fb/0xb60
ipgre_xmit+0x14d/0x280 [ip_gre]
dev_hard_start_xmit+0xc3/0x1c0
__dev_queue_xmit+0x208/0xba0
? nf_hook_slow+0x3f/0xd0
ip_finish_output2+0x1ca/0x580
ip_sublist_rcv_finish+0x32/0x40
ip_sublist_rcv+0x1b2/0x1f0
? ip_rcv_finish_core.constprop.0+0x460/0x460
ip_list_rcv+0x103/0x130
__netif_receive_skb_list_core+0x181/0x1e0
netif_receive_skb_list_internal+0x1b3/0x2c0
napi_gro_receive+0xc8/0x200
gro_cell_poll+0x52/0x90
__napi_poll+0x25/0x1a0
net_rx_action+0x28e/0x300
__do_softirq+0xc3/0x276
? sort_range+0x20/0x20
run_ksoftirqd+0x1e/0x30
smpboot_thread_fn+0xa6/0x130
kthread+0xcd/0x100
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x31/0x50
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
The suggested fix is to introduce a new wrapper (skb_page_unref) that
covers page refcounting for page_pool pages as well.
Cc: stable@vger.kernel.org
Fixes: 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling")
Reported-and-tested-by: Anatoli N.Chechelnickiy <Anatoli.Chechelnickiy@m.interpipe.biz>
Reported-by: Ian Kumlien <ian.kumlien@gmail.com>
Link: https://lore.kernel.org/netdev/CAA85sZvvHtrpTQRqdaOx6gd55zPAVsqMYk_Lwh4Md5knTq7AyA@mail.gmail.com
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the IPv4 modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-7-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The word "advertize" should be replaced by "advertise".
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In esp_remove_trailer(), to avoid an unexpected result returned by
pskb_trim, we should check the return value of pskb_trim().
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
key might contain private part of the key, so better use
kfree_sensitive to free it.
Fixes: 38320c70d282 ("[IPSEC]: Use crypto_aead and authenc in ESP")
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes the temporary scaffolding now that the comletion
function signature has been converted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds temporary scaffolding so that the Crypto API
completion function can take a void * instead of crypto_async_request.
Once affected users have been converted this can be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
1) Refactor selftests to use an array of structs in xfrm_fill_key().
From Gautam Menghani.
2) Drop an unused argument from xfrm_policy_match.
From Hongbin Wang.
3) Support collect metadata mode for xfrm interfaces.
From Eyal Birger.
4) Add netlink extack support to xfrm.
From Sabrina Dubroca.
Please note, there is a merge conflict in:
include/net/dst_metadata.h
between commit:
0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")
from the net-next tree and commit:
5182a5d48c3d ("net: allow storing xfrm interface metadata in metadata_dst")
from the ipsec-next tree.
Can be solved as done in linux-next.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
We will soon introduce an optional per-netns ehash.
This means we cannot use tcp_hashinfo directly in most places.
Instead, access it via net->ipv4.tcp_death_row.hashinfo.
The access will be valid only while initialising tcp_hashinfo
itself and creating/destroying each netns.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When building with Clang we encounter these warnings:
| net/ipv4/ah4.c:513:4: error: format specifies type 'unsigned short' but
| the argument has type 'int' [-Werror,-Wformat]
| aalg_desc->uinfo.auth.icv_fullbits / 8);
-
| net/ipv4/esp4.c:1114:5: error: format specifies type 'unsigned short'
| but the argument has type 'int' [-Werror,-Wformat]
| aalg_desc->uinfo.auth.icv_fullbits / 8);
`aalg_desc->uinfo.auth.icv_fullbits` is a u16 but due to default
argument promotion becomes an int.
Variadic functions (printf-like) undergo default argument promotion.
Documentation/core-api/printk-formats.rst specifically recommends using
the promoted-to-type's format flag.
As per C11 6.3.1.1:
(https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf) `If an int
can represent all values of the original type ..., the value is
converted to an int; otherwise, it is converted to an unsigned int.
These are called the integer promotions.` Thus it makes sense to change
%hu to %d not only to follow this standard but to suppress the warning
as well.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Justin Stitt <justinstitt@google.com>
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Move the len fields manipulation in the skbs to a helper function.
There is a comment specifically requesting this and there are several
other areas in the code displaying the same pattern which can be
refactored.
This improves code readability.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Link: https://lore.kernel.org/r/20220622160853.GA6478@debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After removal of Innova IPsec support from mlx5 driver, the last user
of this XFRM_ESP_NO_TRAILER was gone too. This means that we can safely
remove it as no other hardware is capable (or need) to remove ESP trailer.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Commit ebe48d368e97 ("esp: Fix possible buffer overflow in ESP
transformation") tried to fix skb_page_frag_refill usage in ESP by
capping allocsize to 32k, but that doesn't completely solve the issue,
as skb_page_frag_refill may return a single page. If that happens, we
will write out of bounds, despite the check introduced in the previous
patch.
This patch forces COW in cases where we would end up calling
skb_page_frag_refill with a size larger than a page (first in
esp_output_head with tailen, then in esp_output_tail with
skb->data_len).
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The maximum message size that can be send is bigger than
the maximum site that skb_page_frag_refill can allocate.
So it is possible to write beyond the allocated buffer.
Fix this by doing a fallback to COW in that case.
v2:
Avoid get get_order() costs as suggested by Linus Torvalds.
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Reported-by: valis <sec@valis.email>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This reverts commit b515d2637276a3810d6595e10ab02c13bfd0b63a.
Commit b515d2637276a3810d6595e10ab02c13bfd0b63a ("xfrm: xfrm_state_mtu
should return at least 1280 for ipv6") in v5.14 breaks the TCP MSS
calculation in ipsec transport mode, resulting complete stalls of TCP
connections. This happens when the (P)MTU is 1280 or slighly larger.
The desired formula for the MSS is:
MSS = (MTU - ESP_overhead) - IP header - TCP header
However, the above commit clamps the (MTU - ESP_overhead) to a
minimum of 1280, turning the formula into
MSS = max(MTU - ESP overhead, 1280) - IP header - TCP header
With the (P)MTU near 1280, the calculated MSS is too large and the
resulting TCP packets never make it to the destination because they
are over the actual PMTU.
The above commit also causes suboptimal double fragmentation in
xfrm tunnel mode, as described in
https://lore.kernel.org/netdev/20210429202529.codhwpc7w6kbudug@dwarf.suse.cz/
The original problem the above commit was trying to fix is now fixed
by commit 6596a0229541270fb8d38d989f91b78838e5e9da ("xfrm: fix MTU
regression").
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
It's assigned twice, but only used to calculate the size of the
structure it points to. Just remove it and take a sizeof the
actual structure.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
|
|
Trivial conflict in net/netfilter/nf_tables_api.c.
Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.
skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-06-23
1) Don't return a mtu smaller than 1280 on IPv6 pmtu discovery.
From Sabrina Dubroca
2) Fix seqcount rcu-read side in xfrm_policy_lookup_bytype
for the PREEMPT_RT case. From Varad Gautam.
3) Remove a repeated declaration of xfrm_parse_spi.
From Shaokun Zhang.
4) IPv4 beet mode can't handle fragments, but IPv6 does.
commit 68dc022d04eb ("xfrm: BEET mode doesn't support
fragments for inner packets") handled IPv4 and IPv6
the same way. Relax the check for IPv6 because fragments
are possible here. From Xin Long.
5) Memory allocation failures are not reported for
XFRMA_ENCAP and XFRMA_COADDR in xfrm_state_construct.
Fix this by moving both cases in front of the function.
6) Fix a missing initialization in the xfrm offload fallback
fail case for bonding devices. From Ayush Sawal.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Its set but never read. Reduces size of xfrm_type to 64 bytes on 64bit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Jianwen reported that IPv6 Interoperability tests are failing in an
IPsec case where one of the links between the IPsec peers has an MTU
of 1280. The peer generates a packet larger than this MTU, the router
replies with a "Packet too big" message indicating an MTU of 1280.
When the peer tries to send another large packet, xfrm_state_mtu
returns 1280 - ipsec_overhead, which causes ip6_setup_cork to fail
with EINVAL.
We can fix this by forcing xfrm_state_mtu to return IPV6_MIN_MTU when
IPv6 is used. After going through IPsec, the packet will then be
fragmented to obey the actual network's PMTU, just before leaving the
host.
Currently, TFC padding is capped to PMTU - overhead to avoid
fragementation: after padding and encapsulation, we still fit within
the PMTU. That behavior is preserved in this patch.
Fixes: 91657eafb64b ("xfrm: take net hdr len into account for esp payload size calculation")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-04-14
Not much this time:
1) Simplification of some variable calculations in esp4 and esp6.
From Jiapeng Chong and Junlin Yang.
2) Fix a clang Wformat warning in esp6 and ah6.
From Arnd Bergmann.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modify "accomodate" to "accommodate" in net/ipv4/esp4.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
