| Age | Commit message (Collapse) | Author |
|---|
|
Baikal-T1 SoC updates for LANDAU Linux v7.0
This merge adds MIPS Baikal-T1 platform support, extensive STMMAC/EDAC
updates, new board support, and various driver fixes/improvements.
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
'pcie-lo', 'edac-bt1', 'xgmac-bt1', 'mips-bpf', 'mips-eva' and 'bsp' into for-landau-next
|
|
It's possible to have more than a single DMA-channel supporting the
TCP-segmentation offloading. The driver currently doesn't support anything
to detected and utilize that. In the meantime the feature may greatly
improve the TCP/IP traffic transfer performance.
Let's fix that by introducing a platform-specific flag
STMMAC_FLAG_TSO_FULL which would indicate such feature availability and
permit selecting any Tx-channel to send TCP/UDP/IP traffic with the
TSO engine.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
There is a Marvell 88X2222 PHY revision with R suffix, which is mainly
compatible with the original PHY but has different ID. Let's add it to the
known Marvell PHY IDs table defined in the marvell_phy.h file.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
DT-bindings wise the Marvell 88X2222 transceiver is a normal 10G PHY with
up to four host-side ports (support 10GBASE-R, XAUI/RXAUI, 1000BASE-X
protocols) and two line-side ports (support 10GBASE-R and 1000BASE-X
interfaces). Besides it is equipped with 12 GPIOs multiplexed with the
special functions like LEDs, TWSI SDA/SCL, etc. They can be used to
communicate with the SFP+ ports soldered to the device line-side
interfaces.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
Baikal-T1 SoC is synthesized with the DW XPCS v3.11b IP-core attached to
DW xGMAC v2.11a over the XGMII interface. DW XPCS is configured to be of
the Back-plane multi-mode with KR/KX4 speeds support (no 1G speed). Thus
the PCS sublayer supports Clause 73 and 72 auto-negotiations performed
over the 10GBASE-KR and 10GBASE-KX4 link modes.
So in order to have the denoted features enabled for the Baikal-T1
XGMAC/XPCS chain the DW XPCS driver is updated with the Baikal-T1
XPCS-specific compat-list. It will be selected in case if the platform
detects the "baikal,bt1-xpcs" compatible device or a device with the
custom BT1_XGMAC_XPCS_ID id.
Note the XPCS device is synthesized with the Synopsys 10G Gen5 PMA. Thus
the corresponding PMA-id is specified in order activate the PMA-specific
config methods.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
DW XPCS can be synthesized with 10GBASE-X/XAUI link support. In that case
xGMAC is still connected to the XPCS device by means of normally
multi-lane high-speed interface (XGMII, USXGMII, etc) meanwhile an
external interface is defined as 10GBASE-X. From the network subsystem
point of view it's as if DW XPCS is fully integrated into the MAC with no
need in setting any intermediate interface up.
Similarly to the 10GBASE-R, in accordance with the IEEE 802.3 standard
10GBASE-X doesn't intent any auto-negotiations but it's defined as also
being utilized by XGXS (Clause 47). Thus a new AN-less mode is defined
DW_10GBASEX in the driver. It implies PCS and PMA setups required for the
device to work in the denoted mode. The respective actions are executed in
the xpcs_do_config() method. At the same time xpcs_link_up() makes sure
that the PCS/PMA<->PHY link actually works and it has compatible speed and
duplex: 10Gbps speed and full-duplex mode.
Note 1. Synopsys 10G Gen5 PMA requires the reference clock switch in case
if the respective flag doesn't correspond to the specified clock sources.
Note 2. XPCS 10GBASE-X interface features list contains all
speed-compatible link modes in order to have the pcs_validate() permitting
these modes for the externally attached PHYs.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
The interface is defined by IEEE 802.3 Clause 48 as a PCS and PMA
sublayer. It is normally utilized to connect XGMII with the 10GBASE-CX4
(Clause 54), 10GBASE-KX4 (Clause 71), and 10GBASE-LX4 (Clause 53) PHYs.
It's an independent four Tx and Rx lanes interface with 8b/10b coding of
the full-duplex stream with constant 10Gb/s speed. 10GBASE-X PCS/PMA is
utlized by the XGXS/XAUI specifications (Clause 47).
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
Synopsys DesignWare Ethernet controllers can be synthesized with
General-Purpose IOs support. GPIOs are divided into two ports: gpi_i -
inputs and gpo_o - outputs. While the GPIOs semantics is identical on all
DW Ethernet controllers the ports width (number of possible
inputs/outputs) and the configuration registers layout depend on the
IP-core version. For instance, DW GMAC can have from 0 to 4 GPIs and from
0 to 4 GPOs, while DW QoS Ether/xGMAC/etc have a wider ports width up to
16 pins of each one. In the framework of provided implementation any
DesignWare Ethernet controllers GPIO block can be supported as soon as the
GPIO registers accessors and the cleanup methods are defined for the
respective IP-core.
Total number of GPIOs MAC supports is supposed to be passed via the
platform descriptor. If it's an OF-based platform, then the standard
"ngpios" DT-property will be parsed for it as well.
Before registering the GPIO-chip in the kernel, the driver will try to
auto-detect the number of GPIs and GPOs by writing 1s into the GPI type
config register. Reading the written value back and calculating the number
of actually set bits will give the GPI port width the device has been
synthesized with.
If GPIs have been detected then GPIO IRQ-chip will be also initialized and
only in that case the GPIO IRQs handling will be activated. Since the
pending events are cleared just by reading from the GPI event status
register, only the edged IRQs type can be implemented. For the same reason
and for the reason of having the rest of GPIO configs reside in the same
CSR, the GPI type, GPI mask and GPO state caches have been added. So the
driver would avoid RMW CSR update code to minimize the pending GPI events
clearing.
Note in case of GPIOs being available the core soft-resetting mustn't be
executed otherwise the GPIO configs will be reset to the initial state. Instead
MAC/DMA stop and CSRs cleanup has been added.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
DW *MAC IP-cores can be synthesized with various system interface data bus
widths. For instance DW GMACs and DW QoS Ether can work with buses of 32,
64 and 128 bits width, while DW xGMACs can be created with system bus of
64 and 128 bits width. The bus width value affects several very important
parameters like DMA transfers granularity and performance, DMA maximum
burst length, Rx DMA buffers alignment. So in order to be able to tune and
verify these parameters let's add the data bus width device property
support. It can be passed either by the platform code or via the DT-node
property. For some reason HW capability register doesn't contain that
parameter in its fields.
Note if the data bus width isn't specified then the driver will use the
default value of 16 bytes. That will apply the strongest constraint on the
PBL values and Rx DMA buffers alignment (the later one is actually
currently hard-coded anyway). In order to get a better HW performance it's
preferable to specify the actual value for a particular version of the
controller.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
Here is what the DW GMAC databooks say about the Rx COE type 1 abilities:
"The application can enable IPv4 header checksum _checking_ and TCP/UDP
checksum _offload_ by setting the GMAC Configuration register’s IPC bit.
This module calculates the 16-bit ones’ complement of the Ethernet frame’s
payload data’s (DATA field) ones’ complement sum. ..." [1,2,3]
Basically it means that the engine _verifies_ the IPv4 header checksum
only and just calculates the 16-bit one's complement sum of the IPv4
datagrams for TCP/UDP protocols. The calculated value is just appended to
the frame pushed up to the system memory, which the driver just _ignores_.
The problem is that despite of all that the NETIF_F_RXCSUM feature is set
for Rx COE type 1 and the packets Rx procedure reports that the all the
IPv4 payloads csum is verified. It's definitely wrong.
In order to fix that let's just drop the entire Rx COE type 1 support
since it has never been properly handled in the driver anyway and most
importantly has been declared as legacy since DW GMAC v3.30a release [2,3]
claiming that the Type 2 engine is generally preferable. Regarding the
IPv4 header checking which is claimed to be performed by the type 1
engine, it's performed by the network core subsystem anyway.
Note originally, prior the commit 38912bdbde5f ("stmmac: sanitize the rx
coe and add the type-1 csum (v2)"), the driver had had the Rx COE type 2
support only [4]. So the implemented solution means to basically revert
the blamed commit provided never actually properly working change.
[1] DesignWare Cores Ethernet MAC Universal Databook, Revision 3.20a,
August 2003, p. 85.
[2] DesignWare Cores Ethernet MAC Universal Databook, Revision 3.50a,
February 2009, p. 114.
[3] DesignWare Cores Ethernet MAC Universal Databook, Revision 3.73a,
October 2013, p. 188.
[4] Link: https://lore.kernel.org/netdev/4F7A9D7E.8080007@st.com/
Fixes: 38912bdbde5f ("stmmac: sanitize the rx coe and add the type-1 csum (v2)")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
Aside from the MIPS P5600 cores Baikal-T1 SoC provides one PCIe x4
Gen.3 port, 2x SATA III, 10Gbit Ethernet, 2x Gbit Ethernet ports,
USB 2.0 port, 32x/3x GPIO, 3x i2c, 3x high-resolution APB timers,
2x UARTs, 3x SPI, PVT sensor. Nearly all of them are based on the
DesignWare IP blocks. This commit provides the Baikal-T1 dts files
with all of these interfaces described.
There are two CPU cores declared having the dedicated CCU PLL as a CPU
clocks source. The corresponding OPP table is also provided to have the
dt-based CPU-freq driver support. As being memory mapped MIPS GIC, CPC,
CDMM and CM2 blocks are described in the corresponding dts nodes.
CPU can be reset by means of the dedicated CPU control register available
via the chip system controller. It's accordingly described in the
syscon-reboot node. In addition the reboot reason can be saved in the
WDT RCR register by means of the syscond-reboot-mode driver.
Clocks Control Unit is also a part of the System Controller. It consists
of four components: high-frequency external oscillator (normally
XTAL's 25 MHz crystal oscillator, but in general it can provide any
frequency supported by the CCU PLLs), PLLs sub-block to generate a
specific higher-frequency clocks from a single external signal, AXI-bus
clocks dividers, system devices reference clock dividers. Each of these
components are represented in a dedicated DT nodes.
Thermal zones are described in a way so to keep the chip in working state.
The actual temperature can be detected either by the embedded PVT sensor
or by some external device.
All the fast interfaces are connected to the main interconnect by means of
the AXI bus and described in the corresponding simple-bus node. Similarly
the slow peripherals are accessed by means of the APB bus. So we grouped
them in a dedicated dts sub-node as well.
Note that some of the DMA-capable devices can't reach all the physical
memory available for CPU in XPA mode. It concerns Eth0/Eth1, USB and SATA
interfaces. That's reflected by setting the 32-bit dma-ranges DT-property,
so the dma_capable() method would return false value for the DMA requests
targeted above 4GiB.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
Currently only the self-cleared AXI DDR reset is supported by the driver
and exposed in the DT-bindings. In some circumstances of the
DDR-controller initialization procedure though it gets to be not enough to
make the memory controller working. Let's add the flag directly handling
the AXI DDR signal, which is a fixup provided by the HW designers just in
case the self-cleared version won't work correctly. The resultant signal
is (!RST_T & !RST_D).
Note it's just a decorative change since the DDR controller is initialized
on the bootloader stage anyway. It's also ok to fix the reset IDs like
that since there is no user of the bindings in upstream anyway. Any new
user shall compile in the correct IDs in the DTBs in time.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
|
|
Add the documentation and dt bindings for Amlogic A1 CPU clock
controller.
This controller consists of the general 'cpu_clk' and two main parents:
'cpu fixed clock' and 'syspll'. The 'cpu fixed clock' is an internal
fixed clock, while the 'syspll' serves as an external input from the A1
PLL clock controller.
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Add "amlogic,t9015-a1" compatible string and new device tree phandle
options.
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
If the DW QoS Ether/XGMAC/XLGMAC/etc are synthesized into the system with
the AXI4 master bus it's possible to specify the cacheability attributes
of the memory accesses. In the meantime if the controller is defined in
the system as DMA-cache-coherent then any cacheable attributes can be
utilized. This shall significantly speed up the controller IO performance.
In our case the iperf3 got x4 faster on a single thread test reaching the
practical maximum of the DW XGMAC controller!
Let's provide a new fine-tuning platform AXI cache coherency parameter
then. So if it's initialized with true then the driver considers that the
device is DMA-coherent and enables the "Write-back No-allocate" memory
access proto with Outer Shareable domain. Thus an Rx-es will be written to
the cache and Tx-es will be read from the cache if there are respective
entries are. Otherwise the data will be read directly from the memory.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
These are normal memory types [1] which can be met on the real hardware.
DW uMCTL2 DDRC IP-core can be configured to have them supported [2,3].
Extend the EDAC memory types enumeration with the corresponding IDs then.
[1] https://en.wikipedia.org/wiki/LPDDR
[2] DesignWare® Cores Enhanced Universal DDR Memory Controller (uMCTL2)
Databook, Version 3.91a, October 2020, p.501
[3] DesignWare® Cores Enhanced Universal DDR Memory Controller (uMCTL2)
Databook, Version 3.91a, October 2020, p.1717
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes for the time/timers subsystem:
- Invert the inverted fastpath decision in check_tick_dependency(),
which prevents NOHZ full to stop the tick. That's a regression
introduced in the 7.0 merge window.
- Prevent a unpriviledged DoS in the clockevents code, where user
space can starve the timer interrupt by arming a timerfd or posix
interval timer in a tight loop with an absolute expiry time in the
past. The fix turned out to be incomplete and was was amended
yesterday to make it work on some 20 years old AMD machines as
well. All issues with it have been confirmed to be resolved by
various reporters"
* tag 'timers-urgent-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clockevents: Prevent timer interrupt starvation
tick/nohz: Fix inverted return value in check_tick_dependency() fast path
|
|
Pull kvm fixes from Paolo Bonzini:
"s390:
- vsie: Fix races with partial gmap invalidations
x86:
- Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: vsie: Fix races with partial gmap invalidations
KVM: x86: Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: One very last second fix
Fix one more gmap-rewrite issue: races with partial gmap invalidations.
|
|
KVM x86 fixes for 7.1
Declare flexible arrays in uAPI structures using __DECLARE_FLEX_ARRAY() so
that KVM's uAPI headers can be included in C++ projects.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Before v7.0 is released, fix a few issues with the CFI patchset,
merged earlier in v7.0-rc, that primarily affect interfaces to
non-kernel code:
- Improve the prctl() interface for per-task indirect branch landing
pad control to expand abbreviations and to resemble the speculation
control prctl() interface
- Expand the "LP" and "SS" abbreviations in the ptrace uapi header
file to "branch landing pad" and "shadow stack", to improve
readability
- Fix a typo in a CFI-related macro name in the ptrace uapi header
file
- Ensure that the indirect branch tracking state and shadow stack
state are unlocked immediately after an exec() on the new task so
that libc subsequently can control it
- While working in this area, clean up the kernel-internal,
cross-architecture prctl() function names by expanding the
abbreviations mentioned above"
* tag 'riscv-for-linus-v7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
prctl: cfi: change the branch landing pad prctl()s to be more descriptive
riscv: ptrace: cfi: expand "SS" references to "shadow stack" in uapi headers
prctl: rename branch landing pad implementation functions to be more explicit
riscv: ptrace: expand "LP" references to "branch landing pads" in uapi headers
riscv: cfi: clear CFI lock status in start_thread()
riscv: ptrace: cfi: fix "PRACE" typo in uapi header
|
|
Calvin reported an odd NMI watchdog lockup which claims that the CPU locked
up in user space. He provided a reproducer, which sets up a timerfd based
timer and then rearms it in a loop with an absolute expiry time of 1ns.
As the expiry time is in the past, the timer ends up as the first expiring
timer in the per CPU hrtimer base and the clockevent device is programmed
with the minimum delta value. If the machine is fast enough, this ends up
in a endless loop of programming the delta value to the minimum value
defined by the clock event device, before the timer interrupt can fire,
which starves the interrupt and consequently triggers the lockup detector
because the hrtimer callback of the lockup mechanism is never invoked.
As a first step to prevent this, avoid reprogramming the clock event device
when:
- a forced minimum delta event is pending
- the new expiry delta is less then or equal to the minimum delta
Thanks to Calvin for providing the reproducer and to Borislav for testing
and providing data from his Zen5 machine.
The problem is not limited to Zen5, but depending on the underlying
clock event device (e.g. TSC deadline timer on Intel) and the CPU speed
not necessarily observable.
This change serves only as the last resort and further changes will be made
to prevent this scenario earlier in the call chain as far as possible.
[ tglx: Updated to restore the old behaviour vs. !force and delta <= 0 and
fixed up the tick-broadcast handlers as pointed out by Borislav ]
Fixes: d316c57ff6bf ("[PATCH] clockevents: add core functionality")
Reported-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Calvin Owens <calvin@wbinvd.org>
Tested-by: Borislav Petkov <bp@alien8.de>
Link: https://lore.kernel.org/lkml/acMe-QZUel-bBYUh@mozart.vkv.me/
Link: https://patch.msgid.link/20260407083247.562657657@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"The kernfs rbtree is keyed by (hash, ns, name) where the hash
is seeded with the raw namespace pointer via init_name_hash(ns).
The resulting hash values are exposed to userspace through
readdir seek positions, and the pointer-based ordering in
kernfs_name_compare() is observable through entry order.
Switch from raw pointers to ns_common::ns_id for both hashing
and comparison.
A preparatory commit first replaces all const void * namespace
parameters with const struct ns_common * throughout kernfs, sysfs,
and kobject so the code can access ns->ns_id. Also compare the
ns_id when hashes match in the rbtree to handle crafted collisions.
Also fix eventpoll RCU grace period issue and a cachefiles refcount
problem"
* tag 'vfs-7.0-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
kernfs: make directory seek namespace-aware
kernfs: use namespace id instead of pointer for hashing and comparison
kernfs: pass struct ns_common instead of const void * for namespace tags
eventpoll: defer struct eventpoll free to RCU grace period
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Still a bit higher amount than wished, but nothing looks really scary,
and all changes are about nice and smooth device-specific fixes.
- HD-audio quirks, one revert for a regression and another oneliner
- AMD ACP quirks
- Fixes for SDCA interrupt handling
- A few Intel SOF, avs and NVL fixes
- Fixes for TAS2552 DT, NAU8325, and STM32"
* tag 'sound-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: amd: acp: update DMI quirk and add ACP DMIC for Lenovo platforms
ASoC: SDCA: Unregister IRQ handlers on module remove
ASoC: SDCA: mask Function_Status value
ASoC: SDCA: Fix overwritten var within for loop
ASoC: stm32_sai: fix incorrect BCLK polarity for DSP_A/B, LEFT_J
ASoC: SOF: Intel: hda: modify period size constraints for ACE4
ALSA: hda/intel: enforce stricter period-size alignment for Intel NVL
ASoC: nau8325: Add software reset during probe
Revert "ALSA: hda/realtek: Add quirk for Gigabyte Technology to fix headphone"
ASoC: Intel: avs: Fix memory leak in avs_register_i2s_test_boards()
ASoC: SOF: Intel: fix iteration in is_endpoint_present()
ASoC: SOF: Intel: Fix endpoint index if endpoints are missing
ASoC: SDCA: Fix errors in IRQ cleanup
ASoC: amd: acp: add Lenovo P16s G5 AMD quirk for legacy SDW machine
ASoC: dt-bindings: ti,tas2552: Add sound-dai-cells
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14IAH10
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Prevent hang at power down for imx8mp-blk-ctrl
- thead: Fix buffer overflow for TH1520 AON driver
- Change Ulf Hansson's email
* tag 'pmdomain-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
MAINTAINERS, mailmap: Change Ulf Hansson's email
pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled
firmware: thead: Fix buffer overflow and use standard endian macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, IPsec and wireless. This is again
considerably bigger than the old average. No known outstanding
regressions.
Current release - regressions:
- net: increase IP_TUNNEL_RECURSION_LIMIT to 5
- eth: ice: fix PTP timestamping broken by SyncE code on E825C
Current release - new code bugs:
- eth: stmmac: dwmac-motorcomm: fix eFUSE MAC address read failure
Previous releases - regressions:
- core: fix cross-cache free of KFENCE-allocated skb head
- sched: act_csum: validate nested VLAN headers
- rxrpc: fix call removal to use RCU safe deletion
- xfrm:
- wait for RCU readers during policy netns exit
- fix refcount leak in xfrm_migrate_policy_find
- wifi: rt2x00usb: fix devres lifetime
- mptcp: fix slab-use-after-free in __inet_lookup_established
- ipvs: fix NULL deref in ip_vs_add_service error path
- eth:
- airoha: fix memory leak in airoha_qdma_rx_process()
- lan966x: fix use-after-free and leak in lan966x_fdma_reload()
Previous releases - always broken:
- ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data()
- ipv4: nexthop: avoid duplicate NHA_HW_STATS_ENABLE on nexthop group
dump
- bridge: guard local VLAN-0 FDB helpers against NULL vlan group
- xsk: tailroom reservation and MTU validation
- rxrpc:
- fix to request an ack if window is limited
- fix RESPONSE authenticator parser OOB read
- netfilter: nft_ct: fix use-after-free in timeout object destroy
- batman-adv: hold claim backbone gateways by reference
- eth:
- stmmac: fix PTP ref clock for Tegra234
- idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling
- ipa: fix GENERIC_CMD register field masks for IPA v5.0+"
* tag 'net-7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (104 commits)
net: lan966x: fix use-after-free and leak in lan966x_fdma_reload()
net: lan966x: fix page pool leak in error paths
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
nfc: pn533: allocate rx skb before consuming bytes
l2tp: Drop large packets with UDP encap
net: ipa: fix event ring index not programmed for IPA v5.0+
net: ipa: fix GENERIC_CMD register field masks for IPA v5.0+
MAINTAINERS: Add Prashanth as additional maintainer for amd-xgbe driver
devlink: Fix incorrect skb socket family dumping
af_unix: read UNIX_DIAG_VFS data under unix_state_lock
Revert "mptcp: add needs_id for netlink appending addr"
mptcp: fix slab-use-after-free in __inet_lookup_established
net: txgbe: leave space for null terminators on property_entry
net: ioam6: fix OOB and missing lock
rxrpc: proc: size address buffers for %pISpc output
rxrpc: only handle RESPONSE during service challenge
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
rxrpc: Fix leak of rxgk context in rxgk_verify_response()
rxrpc: Fix integer overflow in rxgk_verify_response()
rxrpc: Fix missing error checks for rxkad encryption/decryption failure
...
|
|
kernfs has historically used const void * to pass around namespace tags
used for directory-level namespace filtering. The only current user of
this is sysfs network namespace tagging where struct net pointers are
cast to void *.
Replace all const void * namespace parameters with const struct
ns_common * throughout the kernfs, sysfs, and kobject namespace layers.
This includes the kobj_ns_type_operations callbacks, kobject_namespace(),
and all sysfs/kernfs APIs that accept or return namespace tags.
Passing struct ns_common is needed because various codepaths require
access to the underlying namespace. A struct ns_common can always be
converted back to the concrete namespace type (e.g., struct net) via
container_of() or to_ns_common() in the reverse direction.
This is a preparatory change for switching to ns_id-based directory
iteration to prevent a KASLR pointer leak through the current use of
raw namespace pointers as hash seeds and comparison keys.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
I only included crash fixes, as we're closer to a release, rest will
be handled via -next.
1) Fix a NULL pointer dereference in ip_vs_add_service error path, from
Weiming Shi, bug added in 6.2 development cycle.
2) Don't leak kernel data bytes from allocator to userspace: nfnetlink_log
needs to init the trailing NLMSG_DONE terminator. From Xiang Mei.
3) xt_multiport match lacks range validation, bogus userspace request will
cause out-of-bounds read. From Ren Wei.
4) ip6t_eui64 match must reject packets with invalid mac header before
calling eth_hdr. Make existing check unconditional. From Zhengchuan
Liang.
5) nft_ct timeout policies are free'd via kfree() while they may still
be reachable by other cpus that process a conntrack object that
uses such a timeout policy. Existing reaping of entries is not
sufficient because it doesn't wait for a grace period. Use kfree_rcu().
From Tuan Do.
6/7) Make nfnetlink_queue hash table per queue. As-is we can hit a page
fault in case underlying page of removed element was free'd. Per-queue
hash prevents parallel lookups. This comes with a test case that
demonstrates the bug, from Fernando Fernandez Mancera.
* tag 'nf-26-04-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: nft_queue.sh: add a parallel stress test
netfilter: nfnetlink_queue: make hash table per queue
netfilter: nft_ct: fix use-after-free in timeout object destroy
netfilter: ip6t_eui64: reject invalid MAC header for all packets
netfilter: xt_multiport: validate range encoding in checkentry
netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator
ipvs: fix NULL deref in ip_vs_add_service error path
====================
Link: https://patch.msgid.link/20260408163512.30537-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Peers may only send immediate acks for every 2 UDP packets received.
When sending a jumbogram, it is important to check that there is
sufficient window space to send another same sized jumbogram following
the current one, and request an ack if there isn't. Failure to do so may
cause the call to stall waiting for an ack until the resend timer fires.
Where jumbograms are in use this causes a very significant drop in
performance.
Fixes: fe24a5494390 ("rxrpc: Send jumbo DATA packets")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-10-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rxrpc_post_response(), the code should be comparing the challenge serial
number from the cached response before deciding to switch to a newer
response, but looks at the newer packet private data instead, rendering the
comparison always false.
Fix this by switching to look at the older packet.
Fix further[1] to substitute the new packet in place of the old one if
newer and also to release whichever we don't use.
Fixes: 5800b1cf3fd8 ("rxrpc: Allow CHALLENGEs to the passed to the app for a RESPONSE")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com [1]
Link: https://patch.msgid.link/20260408121252.2249051-7-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu()
rather than list_del_init() to prevent stuffing up reading
/proc/net/rxrpc/calls from potentially getting into an infinite loop.
This, however, means that list_empty() no longer works on an entry that's
been deleted from the list, making it harder to detect prior deletion. Fix
this by:
Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that
are unexpectedly still on the list. Limiting the number of steps means
there's no need to call cond_resched() or to remove calls from the list
here, thereby eliminating the need for rxrpc_put_call() to check for that.
rxrpc_put_call() can then be fixed to unconditionally delete the call from
the list as it is the only place that the deletion occurs.
Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing")
Closes: https://sashiko.dev/#/patchset/20260319150150.4189381-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- handling of new keycodes for contextual AI usages (Akshai Murari)
- fix for UAF in hid-roccat (Benoît Sevens)
- deduplication of error logging in amd_sfh (Maximilian Pezzullo)
- various device-specific quirks and device ID additions (Even Xu, Lode
Willems, Leo Vriska)
* tag 'hid-for-linus-2026040801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Input: add keycodes for contextual AI usages (HUTRR119)
HID: Kysona: Add support for VXE Dragonfly R1 Pro
HID: amd_sfh: don't log error when device discovery fails with -EOPNOTSUPP
HID: quirks: add HID_QUIRK_ALWAYS_POLL for 8BitDo Pro 3
HID: roccat: fix use-after-free in roccat_report_event
HID: Intel-thc-hid: Intel-quickspi: Add NVL Device IDs
HID: Intel-thc-hid: Intel-quicki2c: Add NVL Device IDs
|
|
김영민 reports that shstk_pop_sigframe() doesn't check for errors from
mmap_read_lock_killable(), which is a silly oversight, and also shows
that we haven't marked those functions with "__must_check", which would
have immediately caught it.
So let's fix both issues.
Reported-by: 김영민 <osori@hspace.io>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ensure that all interrupt handlers are unregistered before the parent
regmap_irq is unregistered.
sdca_irq_cleanup() was only called from the component_remove(). If the
module was loaded and removed without ever being component probed the
FDL interrupts would not be unregistered and this would hit a WARN
when devm called regmap_del_irq_chip() during the removal of the
parent IRQ.
Fixes: 4e53116437e9 ("ASoC: SDCA: Fix errors in IRQ cleanup")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260408093835.2881486-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sharing a global hash table among all queues is tempting, but
it can cause crash:
BUG: KASAN: slab-use-after-free in nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
[..]
nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
nfnetlink_rcv_msg+0x46a/0x930
kmem_cache_alloc_node_noprof+0x11e/0x450
struct nf_queue_entry is freed via kfree, but parallel cpu can still
encounter such an nf_queue_entry when walking the list.
Alternative fix is to free the nf_queue_entry via kfree_rcu() instead,
but as we have to alloc/free for each skb this will cause more mem
pressure.
Cc: Scott Mitchell <scott.k.mitch1@gmail.com>
Fixes: e19079adcd26 ("netfilter: nfnetlink_queue: optimize verdict lookup with hash table")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
Call Trace:
nf_conntrack_tcp_packet+0x1381/0x29d0
nf_conntrack_in+0x612/0x8b0
nf_hook_slow+0x70/0x100
__ip_local_out+0x1b2/0x210
tcp_sendmsg_locked+0x722/0x1580
__sys_sendto+0x2d8/0x320
Allocated by task 75:
nft_ct_timeout_obj_init+0xf6/0x290
nft_obj_init+0x107/0x1b0
nf_tables_newobj+0x680/0x9c0
nfnetlink_rcv_batch+0xc29/0xe00
Freed by task 26:
nft_obj_destroy+0x3f/0xa0
nf_tables_trans_destroy_work+0x51c/0x5c0
process_one_work+0x2c4/0x5a0
Fixes: 7e0b2b57f01d ("netfilter: nft_ct: add ct timeout support")
Cc: stable@vger.kernel.org
Signed-off-by: Tuan Do <tuan@calif.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
- Two fixes for Hyper-V PCI driver (Long Li, Sahil Chandna)
- Fix an infinite loop issue in MSHV driver (Stanislav Kinsburskii)
* tag 'hyperv-fixes-signed-20260406' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: Fix infinite fault loop on permission-denied GPA intercepts
PCI: hv: Fix double ida_free in hv_pci_probe error path
PCI: hv: Set default NUMA node to 0 for devices without affinity info
|
|
Currently xp_assign_dev_shared() is missing XDP_USE_SG being propagated
to flags so set it in order to preserve mtu check that is supposed to be
done only when no multi-buffer setup is in picture.
Also, this flag has the same value as XDP_UMEM_TX_SW_CSUM so we could
get unexpected SG setups for software Tx checksums. Since csum flag is
UAPI, modify value of XDP_UMEM_SG_FLAG.
Fixes: d609f3d228a8 ("xsk: add multi-buffer support for sockets sharing umem")
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260402154958.562179-4-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multi-buffer XDP stores information about frags in skb_shared_info that
sits at the tailroom of a packet. The storage space is reserved via
xdp_data_hard_end():
((xdp)->data_hard_start + (xdp)->frame_sz - \
SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
and then we refer to it via macro below:
static inline struct skb_shared_info *
xdp_get_shared_info_from_buff(const struct xdp_buff *xdp)
{
return (struct skb_shared_info *)xdp_data_hard_end(xdp);
}
Currently we do not respect this tailroom space in multi-buffer AF_XDP
ZC scenario. To address this, introduce xsk_pool_get_tailroom() and use
it within xsk_pool_get_rx_frame_size() which is used in ZC drivers to
configure length of HW Rx buffer.
Typically drivers on Rx Hw buffers side work on 128 byte alignment so
let us align the value returned by xsk_pool_get_rx_frame_size() in order
to avoid addressing this on driver's side. This addresses the fact that
idpf uses mentioned function *before* pool->dev being set so we were at
risk that after subtracting tailroom we would not provide 128-byte
aligned value to HW.
Since xsk_pool_get_rx_frame_size() is actively used in xsk_rcv_check()
and __xsk_rcv(), add a variant of this routine that will not include 128
byte alignment and therefore old behavior is preserved.
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260402154958.562179-3-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The largest part here are devicetree fixes for Qualcomm, and NXP i.MX,
addressing a few regressions and incorrect settings in board and SoC
pecific dts files.
The largest single commits are a revert of a cleanup patch for i.MX
that caused regressions for the NAND flash controller and a fixup for
an incomplete cleanup of the PCIe controller on Qualcomm platforms
that broke because the state was left incompatible with both the old
and new behavior.
On the Rockchips, Hisilicon, Renesas, Allwinner and AT91 platforms,
only a single simple dts bugfix each was added since the last round of
fixes.
On the SoC specific device drivers, everything is relatively harmless:
three reset controller driver fixes, a compatibility for fix ASpeed
soc ID, and error handling fixes for Qualcomm and Microchip. One
regression fix on Qualcomm addresses a problem with a previous fix for
DisplayPort alt mode"
* tag 'soc-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
arm64: dts: qcom: hamoa: Fix incomplete Root Port property migration
dt-bindings: display/msm: qcm2290-mdss: Fix missing ranges in example
firmware: microchip: fail auto-update probe if no flash found
arm64: dts: renesas: sparrow-hawk: Reserve first 128 MiB of DRAM
arm64: dts: qcom: agatti: Fix IOMMU DT properties
dt-bindings: media: venus: Fix iommus property
dt-bindings: display: msm: qcm2290-mdss: Fix iommus property
arm64: dts: allwinner: sun55i: Fix r-spi DMA
reset: spacemit: k3: Decouple composite reset lines
reset: gpio: fix double free in reset_add_gpio_aux_device() error path
ARM: dts: microchip: sam9x7: fix gpio-lines count for pioB
arm64: dts: hisilicon: hi3798cv200: Add missing dma-ranges
arm64: dts: hisilicon: poplar: Correct PCIe reset GPIO polarity
reset: rzg2l-usbphy-ctrl: Fix malformed MODULE_AUTHOR string
soc: microchip: mpfs-mss-top-sysreg: Fix resource leak on driver unbind
soc: microchip: mpfs-control-scb: Fix resource leak on driver unbind
soc: qcom: pmic_glink_altmode: Fix TBT->SAFE->!TBT transition
arm64: dts: qcom: monaco: Reserve full Gunyah metadata region
arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage up to 0.85V
Revert "arm64: dts: imx8mq-librem5: Set the DVS voltages lower"
...
|
|
IRQs are enabled through sdca_irq_populate() from component probe
using devm_request_threaded_irq(), this however means the IRQs can
persist if the sound card is torn down. Some of the IRQ handlers
store references to the card and the kcontrols which can then
fail. Some detail of the crash was explained in [1].
Generally it is not advised to use devm outside of bus probe, so
the code is updated to not use devm. The IRQ requests are not moved
to bus probe time as it makes passing the snd_soc_component into
the IRQs very awkward and would the require a second step once the
component is available, so it is simpler to just register the IRQs
at this point, even though that necessitates some manual cleanup.
Link: https://lore.kernel.org/linux-sound/20260310183829.2907805-1-gaggery.tsai@intel.com/ [1]
Fixes: b126394d9ec6 ("ASoC: SDCA: Generic interrupt support")
Reported-by: Gaggery Tsai <gaggery.tsai@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260316141449.2950215-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are a relativly large number of small char/misc/iio and other
driver fixes for 7.0-rc7. There's a bunch, but overall they are all
small fixes for issues that people have been having that I finally
caught up with getting merged due to delays on my end.
The "largest" change overall is just some documentation updates to the
security-bugs.rst file to hopefully tell the AI tools (and any users
that actually read the documentation), how to send us better security
bug reports as the quantity of reports these past few weeks has
increased dramatically due to tools getting better at "finding"
things.
Included in here are:
- lots of small IIO driver fixes for issues reported in 7.0-rc
- gpib driver fixes
- comedi driver fixes
- interconnect driver fix
- nvmem driver fixes
- mei driver fix
- counter driver fix
- binder rust driver fixes
- some other small misc driver fixes
All of these have been in linux-next this week with no reported issues"
* tag 'char-misc-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (63 commits)
Documentation: fix two typos in latest update to the security report howto
Documentation: clarify the mandatory and desirable info for security reports
Documentation: explain how to find maintainers addresses for security reports
Documentation: minor updates to the security contacts
.get_maintainer.ignore: add myself
nvmem: zynqmp_nvmem: Fix buffer size in DMA and memcpy
nvmem: imx: assign nvmem_cell_info::raw_len
misc: fastrpc: check qcom_scm_assign_mem() return in rpmsg_probe
misc: fastrpc: possible double-free of cctx->remote_heap
comedi: dt2815: add hardware detection to prevent crash
comedi: runflags cannot determine whether to reclaim chanlist
comedi: Reinit dev->spinlock between attachments to low-level drivers
comedi: me_daq: Fix potential overrun of firmware buffer
comedi: me4000: Fix potential overrun of firmware buffer
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
gpib: fix use-after-free in IO ioctl handlers
gpib: lpvo_usb: fix memory leak on disconnect
gpib: Fix fluke driver s390 compile issue
lis3lv02d: Omit IRQF_ONESHOT if no threaded handler is provided
lis3lv02d: fix kernel-doc warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout
to Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding
and unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little
beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems"
* tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
usb: host: xhci-sideband: delegate offload_usage tracking to class drivers
usb: core: use dedicated spinlock for offload state
usb: cdns3: gadget: fix state inconsistency on gadget init failure
usb: dwc3: imx8mp: fix memory leak on probe failure path
usb: gadget: f_uac1_legacy: validate control request size
usb: ulpi: fix double free in ulpi_register_interface() error path
usb: misc: usbio: Fix URB memory leak on submit failure
USB: core: add NO_LPM quirk for Razer Kiyo Pro webcam
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
usb: core: phy: avoid double use of 'usb3-phy'
USB: serial: option: add MeiG Smart SRM825WN
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
usb: gadget: f_subset: Fix net_device lifecycle with device_move
usb: gadget: f_eem: Fix net_device lifecycle with device_move
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
usb: gadget: u_ncm: Add kernel-doc comments for struct f_ncm_opts
usb: gadget: f_rndis: Protect RNDIS options with mutex
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
dt-bindings: connector: add pd-disable dependency
...
|
|
Per Linus' comments requesting the replacement of "INDIR_BR_LP" in the
indirect branch tracking prctl()s with something more readable, and
suggesting the use of the speculation control prctl()s as an exemplar,
reimplement the prctl()s and related constants that control per-task
forward-edge control flow integrity.
This primarily involves two changes. First, the prctls are
restructured to resemble the style of the speculative execution
workaround control prctls PR_{GET,SET}_SPECULATION_CTRL, to make them
easier to extend in the future. Second, the "indir_br_lp" abbrevation
is expanded to "branch_landing_pads" to be less telegraphic. The
kselftest and documentation is adjusted accordingly.
Link: https://lore.kernel.org/linux-riscv/CAHk-=whhSLGZAx3N5jJpb4GLFDqH_QvS07D+6BnkPWmCEzTAgw@mail.gmail.com/
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Per Linus' comments about the unreadability of abbreviations such as
"indir_br_lp", rename the three prctl() implementation functions to be more
explicit. This involves renaming "indir_br_lp_status" in the function
names to "branch_landing_pad_state".
While here, add _prctl_ into the function names, following the
speculation control prctl implementation functions.
Link: https://lore.kernel.org/linux-riscv/CAHk-=whhSLGZAx3N5jJpb4GLFDqH_QvS07D+6BnkPWmCEzTAgw@mail.gmail.com/
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Prevent infinite fault loops when guests access memory regions without
proper permissions. Currently, mshv_handle_gpa_intercept() attempts to
remap pages for all faults on movable memory regions, regardless of
whether the access type is permitted. When a guest writes to a read-only
region, the remap succeeds but the region remains read-only, causing
immediate re-fault and spinning the vCPU indefinitely.
Validate intercept access type against region permissions before
attempting remaps. Reject writes to non-writable regions and executes to
non-executable regions early, returning false to let the VMM handle the
intercept appropriately.
This also closes a potential DoS vector where malicious guests could
intentionally trigger these fault loops to consume host resources.
Fixes: b9a66cd5ccbb ("mshv: Add support for movable memory regions")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
In configurations with multiple tunnel layers and MPLS lwtunnel routing, a
single tunnel hop can increment the counter beyond this limit. This causes
packets to be dropped with the "Dead loop on virtual device" message even
when a routing loop doesn't exist.
Increase IP_TUNNEL_RECURSION_LIMIT from 4 to 5 to handle this use-case.
Fixes: 6f1a9140ecda ("net: add xmit recursion limit to tunnel xmit functions")
Link: https://lore.kernel.org/netdev/88deb91b-ef1b-403c-8eeb-0f971f27e34f@redhat.com/
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260402222401.3408368-1-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix kerneldocs for gpio-timberdale and gpio-nomadik
- clear the "requested" flag in error path in gpiod_request_commit()
- call of_xlate() if provided when setting up shared GPIOs
- handle pins shared by child firmware nodes of consumer devices
- fix return value check in gpio-qixis-fpga
- fix suspend on gpio-mxc
- fix gpio-microchip DT bindings
* tag 'gpio-fixes-for-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
dt-bindings: gpio: fix microchip #interrupt-cells
gpio: shared: shorten the critical section in gpiochip_setup_shared()
gpio: mxc: map Both Edge pad wakeup to Rising Edge
gpio: qixis-fpga: Fix error handling for devm_regmap_init_mmio()
gpio: shared: handle pins shared by child nodes of devices
gpio: shared: call gpio_chip::of_xlate() if set
gpiolib: clear requested flag if line is invalid
gpio: nomadik: repair some kernel-doc comments
gpio: timberdale: repair kernel-doc comments
gpio: Fix resource leaks on errors in gpiochip_add_data_with_key()
|
